pragmatic system distribution guideline compliancepsdg

osboot is now part of libreboot, and will soon shut down.
libreboot now conforms to osboot policy.

1 files changed, 0 insertions, 190 deletions

diff --git a/resources/u-boot/default/blobs.list b/resources/u-boot/default/blobs.list
deleted file mode 100644
index d3153480..00000000
--- a/resources/u-boot/default/blobs.list
+++ /dev/null
@@ -1,190 +0,0 @@
-arch/x86/dts/microcode/
-
-# The license is nonfree because it contains the following: "Reverse
-# engineering, decompilation, or disassembly of this software is not
-# permitted."
-Licenses/r8a779x_usb3.txt
-drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h
-
-# The documentation contains instructions to download and install nonfree
-# software. Note that if a board doesn't have such instructions it doesn't
-# necessarily means that it can boot with only free software and viceversa.
-
-###########
-# Amlogic #
-###########
-# Amlogic SOCs Usually have various nonfree components, like the first stages
-# of the bootloaders and code that runs in TrustZone. They are most likely
-# not signed.
-# ---------
-# TODO: List the nonfree software of specific documentation
-doc/board/amlogic/beelink-gtkingpro.rst
-doc/board/amlogic/beelink-gtking.rst
-doc/board/amlogic/index.rst
-doc/board/amlogic/khadas-vim2.rst
-doc/board/amlogic/khadas-vim3l.rst
-doc/board/amlogic/khadas-vim3.rst
-doc/board/amlogic/khadas-vim.rst
-doc/board/amlogic/libretech-ac.rst
-doc/board/amlogic/libretech-cc.rst
-doc/board/amlogic/nanopi-k2.rst
-doc/board/amlogic/odroid-c2.rst
-doc/board/amlogic/odroid-c4.rst
-doc/board/amlogic/odroid-n2.rst
-doc/board/amlogic/p200.rst
-doc/board/amlogic/p201.rst
-doc/board/amlogic/p212.rst
-doc/board/amlogic/q200.rst
-doc/board/amlogic/s400.rst
-doc/board/amlogic/sei510.rst
-doc/board/amlogic/sei610.rst
-doc/board/amlogic/u200.rst
-doc/board/amlogic/w400.rst
-doc/board/amlogic/wetek-core2.rst
-
-#########
-# Linux #
-#########
-# Has intructions to build Linux which is not FSDG compliant.
-# TODO: Use linux-libre instead, especially because documentation about vboot
-# could be interesting to have. Vboot is a chain of trust that can work with
-# only free software. The hardware root of trust can be created by booting on
-# a flash chip whose security registers are configured to set the first
-# bootloader component read-only.
-doc/uImage.FIT/beaglebone_vboot.txt
-# Steers very strongly users into using Linux as it shows that the only tested
-# kernels are Broadcom forks of Linux. We would need to have linux-libre
-# versions of these or test it with stock linux-libre instead.
-doc/README.bcm7xxx
-
-############
-# Mediatek #
-############
-# The instructions uses binaries that lack any corresponding source code.
-doc/README.mediatek
-
-#############
-# NXP I.MX8 #
-#############
-# I.MX8 SOCs require a nonfree firmware for the DDR4 controller. In some
-# documentation, I didn't find that requirement mentioned, but instead
-# there are still nonfree files mentioned. So I assume that they might
-# somehow contain code for that nonfree DDR4 controller, but it might be
-# worth checking if it's the case or not. The DDR4 controller firmware is not
-# signed. In addition the I.MX8 HDMI controller requires a signed firmware.
-# -----------
-# nonfree DDR4 controller firmware
-doc/board/freescale/imx8mp_evk.rst
-# nonfree DDR4 controller and HDMI firmwares
-doc/board/freescale/imx8mq_evk.rst
-# nonfree DDR4 controller firmware
-doc/board/freescale/imx8mn_evk.rst
-# nonfree imx-sc-firmware-1.2.7.1.bin and imx-seco-2.3.1.bin firmwares
-doc/board/freescale/imx8qxp_mek.rst
-# nonfree DDR4 controller firmware
-doc/board/freescale/imx8mm_evk.rst
-# nonfree imx-sc-firmware-1.1.bin and firmware-imx-8.0.bin firmwares
-doc/board/advantech/imx8qm-rom7720-a1.rst
-# Firmware without source code. Also removed by Debian in their u-boot[1] in
-# commit: 14947286a0 Add Files-Excluded: to debian/copyright to document files
-# to remove from upstream source tarball.
-# [1]https://salsa.debian.org/debian/u-boot.git
-drivers/dma/MCD_tasks.c
-# TODO
-doc/board/verdin-imx8mm.rst
-doc/board/toradex/colibri-imx8x.rst
-doc/board/toradex/apalix-imx8x.rst
-doc/board/toradex/apalix-imx8.rst
-
-#######################
-# NXP nonfree srktool #
-#######################
-# The SRK tool is a tool that is involved in one way or another with
-# authenticated or encrypted boot. I'm unsure if free software replacements
-# exists or if could easily be replaced with a free software implementation.
-# In any case the I.MX6 and I.MX5 can proabably be setup for encrypted or
-# authenticated boot with free software tools. The first and second versions
-# of the USB Armory has documentation on how to do that.
-# ---------------------
-doc/imx/board/toradex/colibri_imx7.rst
-doc/imx/habv4/introduction_habv4.txt
-
-##################
-# Samsung Exynos #
-##################
-# The instructions makes users nonfree components like a nonfree first stage
-# bootloaders, and nonfree code that runs in TrustZone.
-doc/README.odroid
-# The instructions makes its users download an image and update u-boot in that
-# image. Because of that, it's extremely likely that the images contains
-# nonfree components that cannot even be redistributed in another form, and
-# that the instructions uses that images because of that.
-doc/README.s5p4418
-
-#####################
-# Texas Instruments #
-#####################
-# Users are expected to use nonfree tools and even sign an NDA to get access
-# to them.
-doc/README.ti-secure
-
-###########
-# Unknown #
-###########
-# Everything looks free software, but the code still needs to be reviewed.
-doc/board/microchip/mpfs_icicle.rst
-# OP-TEE is under a free software license but its code needs to be reviewed.
-doc/README.tee
-# The tutorial has instructions to download a downstream u-boot, so it might
-# have the same issues than u-boot itself if the u-boot is recent enough.
-doc/chromium/run_vboot.rst
-
-#######
-# x86 #
-#######
-# Unless the computer is supported by Libreboot, or that u-boot runs after
-# some other nonfree boot software like a BIOS or UEFI, it's unlikely to be
-# able to run with only free software. Though I'm pretty sure that some
-# exceptions do exists, but they are probably not supported by u-boot.
-# -----
-# nonfree Management Engine firmware, RAM intialization code, and video BIOS
-doc/board/google/chromebook_link.rst
-# nonfree SDRAM and hardware intialization code
-doc/board/google/chromebook_coral.rst
-
-# nonfree FSP, video BIOS, Management Engine firmware
-doc/board/intel/minnowmax.rst
-# nonfree FSP, Chipset Micro Code (CMC), microcode
-doc/board/intel/crownbay.rst
-
-# TODO: check
-# board/intel/edison.rst
-# Steers userstoward using nonfree FSP
-board/intel/slimbootloader.rst
-
-# Steers users and developers toward using nonfree FSP
-doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-m.txt
-
-# Steers users and developers toward using nonfree FSP
-doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-s.txt
-
-############
-# Rockchip #
-############
-# rkbin binaries without license nor source code
-doc/board/rockchip/rockchip.rst
-
-# TODO: check the following files
-# imx/common/mxs.txt
-# README.armada-secureboot
-# README.fdt-control
-# README.fsl-ddr
-# README.m54418twr
-# README.marvell
-# README.mpc85xxcds
-# README.mpc85xx-sd-spi-boot
-# README.OFT
-# README.rmobile
-# README.rockchip
-# README.rockusb
-# README.socfpga