NEW BOARD: Dell Precision T1650

Very nice ivybridge board that supports ECC RAM.
NOTE: I couldn't get onboard graphics working yet, but
this was confirmed working with a graphics card (in my
case nvidia quadra k420) booted in text mode on the SeaBIOS
payload. The GRUB payload also works, when loaded from SeaBIOS.
Therefore, this is a SeaBIOS-only board (as far as first payload
is concerned), but you can pick GRUB from the menu.

You could make it "GRUB-only" in practise by setting SeaBIOS
boot order to only load GRUB, and disable the SeaBIOS menu.
We refer to this as "SeaGRUB".

I've made lbmk use biosutilities and uefiextract, to
get at the SMSC SCH5545 Environmental Control (EC) firmware.
This firmware is needed for fan control. This is automatically
downloaded and extracted, from Dell UEFI firmware updates.

As with other blobs such as Intel ME, this firmware is then
scrubbed by the release build scripts. The blobutil "inject"
script can be used to re-insert it.

Of note: there is no fixed offset, but no other blobs to
be inserted in CBFS either, so the offset when re-inserting
on release ROMs should still be the same, and thus the ROM
checksums should match, when running blobutil inject.

Signed-off-by: Leah Rowe <leah@libreboot.org>

1 files changed, 3 insertions, 3 deletions

diff --git a/resources/scripts/build/release/src b/resources/scripts/build/release/src
index 7a2f94d7..0e3237ab 100755
--- a/resources/scripts/build/release/src
+++ b/resources/scripts/build/release/src
@@ -24,7 +24,7 @@ set -u -e
 projectname="$(cat projectname)"
 
 modlist="coreboot flashrom grub memtest86plus seabios me_cleaner u-boot"
-modlist="${modlist} bios_extract"
+modlist="${modlist} bios_extract biosutilities uefitool"
 
 dirlist="resources util" # do not add blobs directory here. it's handled below
 
@@ -104,8 +104,8 @@ copy_blobs()
 	mkdir -p "${srcdir}"/blobs
 	# do not copy intel ME etc, but do copy ifd/gbe files
 	for i in t440p xx20 xx30 hp8200sff hp_ivybridge hp_sandybridge \
-			hp8300usdt; do
-		for j in ifd gbe 16_ifd; do
+	    hp8300usdt t1650; do
+		for j in ifd gbe 4_ifd 8_ifd 12_ifd 16_ifd; do
 			if [ -f "blobs/${i}/${j}.bin" ]; then
 				if [ ! -e "${srcdir}/blobs/${i}" ]; then
 					mkdir -p "${srcdir}/blobs/${i}"