split up include/

Signed-off-by: Leah Rowe <leah@libreboot.org>

1 files changed, 0 insertions, 292 deletions

diff --git a/include/get.sh b/include/get.sh
deleted file mode 100644
index 2a9d182b..00000000
--- a/include/get.sh
+++ /dev/null
@@ -1,292 +0,0 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# Copyright (c) 2020-2021,2023-2026 Leah Rowe <leah@libreboot.org>
-# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-
-eval "`newvar url bkup_url depend loc subcurl subcurl_bkup subgit subgit_bkup \
-    subhash`"
-
-tmpgit="$xbtmp/gitclone"
-tmpgitcache="$xbtmp/tmpgit"
-
-fetch_targets()
-{
-	[ -d "src/$project/$tree" ] && \
-		return 0
-
-	git_prep "$url" "$bkup_url" "$xbmkpwd/$configdir/$tree/patches" \
-	    "src/$project/$tree" "submod"
-}
-
-fetch_project()
-{
-	xgcctree=""
-
-	. "config/git/$project/pkg.cfg" || \
-	    err "Can't read config 'config/git/$project/pkg.cfg'" \
-	    "fetch_project" "@"
-
-	if [ -z "$url" ] || [ -z "$bkup_url" ]; then
-		err "url/bkup_url not both set 'config/git/$project/pkg.cfg'" \
-		    "fetch_project" "$@"
-	fi
-
-	[ -n "$xgcctree" ] && \
-		x_ ./mk -f coreboot "$xgcctree"
-
-	[ -n "$depend" ] && \
-		for d in $depend ; do
-			x_ ./mk -f $d
-		done
-
-	clone_project
-}
-
-clone_project()
-{
-	singletree "$project" || \
-		return 0
-
-	loc="src/$project"
-	[ -d "$loc" ] && \
-		return 0
-
-	remkdir "${tmpgit%/*}"
-	git_prep "$url" "$bkup_url" "$xbmkpwd/config/$project/patches" "$loc"
-}
-
-git_prep()
-{
-	printf "Creating code directory, src/%s/%s\n" "$project" "$tree"
-
-	_patchdir="$3"
-	_loc="$4" # $1 and $2 are gitrepo and gitrepo_backup
-
-	[ -z "$rev" ] && \
-		err "$project/$tree: rev not set" "git_prep" "$@"
-
-	xbget git "$1" "$2" "$tmpgit" "$rev" "$_patchdir"
-	if singletree "$project" || [ $# -gt 4 ]; then
-		dx_ fetch_submodule "$mdir/module.list"
-	fi
-
-	[ "$_loc" != "${_loc%/*}" ] && \
-		x_ mkdir -p "${_loc%/*}"
-
-	x_ mv "$tmpgit" "$_loc"
-}
-
-fetch_submodule()
-{
-	mcfgdir="$mdir/${1##*/}"
-	eval "`newvar st subcurl subcurl_bkup subgit subgit_bkup subhash`"
-
-	if e "$mcfgdir/module.cfg" f missing; then
-		return 0
-	fi
-	. "$mcfgdir/module.cfg" || \
-	    err "Can't read '$mcfgdir/module.cfg'" "fetch_submodules" "$@"
-
-	[ -n "$subgit" ] && [ -n "$subgit_bkup" ] && \
-		st="git"
-	[ -n "$subcurl" ] && [ -n "$subcurl_bkup" ] && \
-		st="curl$st"
-	[ "$st" = "curlgit" ] && \
-		err "$mdir: git+curl defined" "fetch_submodule" "$@"
-	[ -z "$st" ] && \
-		return 0
-	[ -z "$subhash" ] && \
-		err "subhash not set" "fetch_submodule" "$@"
-
-	[ "$st" = "git" ] && \
-		x_ rm -Rf "$tmpgit/$1"
-
-	eval "xbget \"\$st\" \"\$sub$st\" \"\$sub${st}_bkup\" \"\$tmpgit/\$1\" \
-	    \"\$subhash\" \"\$mdir/\${1##*/}/patches\""
-}
-
-# TODO: in the following functions, argument numbers are used
-#       which is hard to understand. the code should be modified
-#       so that variable names are used instead, for easy reading
-
-xbget()
-{
-	[ "$1" != "curl" ] && [ "$1" != "copy" ] && [ "$1" != "git" ] && \
-		err "Bad dlop (arg 1)" "xbget" "$@"
-
-	for url in "$2" "$3"; do
-		[ -z "$url" ] && \
-			err "empty URL given in" "xbget" "$@"
-		try_fetch_$1 "$url" "$@" || \
-			continue
-		[ -e "$4" ] && \
-			return 0; : # successful download/copy
-	done
-
-	err "failed to download file/repository" "xbget" "$@"; :
-}
-
-try_fetch_git()
-{
-	# 1st argument $1 is the current git remote being tried,
-	# let's say it was https://foo.example.com/repo, then cached
-	# directories becomes cache/mirror/foo.example.com/repo
-
-	cached="clone"
-	[ "$XBMK_CACHE_MIRROR" = "y" ] && \
-		cached="mirror"
-	cached="$cached/${1#*://}"
-	cached="$XBMK_CACHE/$cached"
-
-	x_ mkdir -p "${5%/*}" "${cached%/*}"
-
-	try_$2 "$cached" "$@" || \
-		return 1
-	[ ! -d "$cached" ] && \
-		return 1
-
-	if [ ! -d "$5" ]; then
-		tmpclone "$cached" "$5" "$6" "$7" || \
-		    err "Can't clone final repo" "try_fetch" "$@"; :
-	fi
-
-	[ ! -d "$5" ] && \
-		return 1; :
-}
-
-try_fetch_copy()
-{
-	try_fetch_curl "$@" || return 1; :
-}
-
-try_fetch_curl()
-{
-	cached="file/$6"
-	cached="$XBMK_CACHE/$cached"
-
-	x_ mkdir -p "${5%/*}" "${cached%/*}"
-
-	if bad_checksum "$6" "$cached" 2>/dev/null; then
-		x_ rm -f "$cached"
-	fi
-
-	[ -f "$cached" ] || \
-		try_$2 "$cached" "$@" || \
-			return 1
-
-	[ -f "$5" ] && \
-		if bad_checksum "$6" "$5" 2>/dev/null; then
-			x_ cp "$cached" "$5"
-		fi
-
-	if [ ! -f "$cached" ]; then
-		return 1
-	elif bad_checksum "$6" "$cached"; then
-		x_ rm -f "$cached"
-		return 1
-	fi
-
-	[ "$cached" != "$5" ] && \
-		x_ cp "$cached" "$5"
-
-	if bad_checksum "$6" "$5"; then
-		x_ rm -f "$5"
-		return 1
-	elif [ ! -f "$5" ]; then
-		return 1
-	fi
-}
-
-try_curl()
-{
-	ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0"
-
-	( x_ curl --location --retry 3 -A "$ua" "$2" -o "$1" ) \
-	    || ( x_ wget --tries 3 -U "$ua" "$2" -O "$1" ) \
-	    || return 1; :
-}
-
-try_copy()
-{
-	( x_ cp "$2" "$1" ) || return 1; :
-}
-
-try_git()
-{
-	gitdest="`findpath "$1" || err "Can't get findpath for '$1'"`" || \
-	    err "failed findpath for '$1'" try_get "$@"
-
-	x_ rm -Rf "$tmpgitcache"
-
-	if [ ! -d "$gitdest" ]; then
-		if [ "$XBMK_CACHE_MIRROR" = "y" ]; then
-			( x_ git clone --mirror "$2" "$tmpgitcache" ) || \
-			    return 1
-		else
-			( x_ git clone "$2" "$tmpgitcache" ) || return 1
-		fi
-
-		x_ mkdir -p "${gitdest%/*}"
-		x_ mv "$tmpgitcache" "$gitdest"
-	fi
-
-	if git -C "$gitdest" show "$7" 1>/dev/null 2>/dev/null && \
-	    [ "$forcepull" != "y" ]; then
-		# don't try to pull the latest changes if the given target
-		# revision already exists locally. this saves a lot of time
-		# during release builds, and reduces the chance that we will
-		# interact with grub.git or gnulib.git overall during runtime
-
-		return 0
-	fi
-
-	if [ "$XBMK_CACHE_MIRROR" = "y" ]; then
-		( x_ git -C "$gitdest" fetch ) || :; :
-		( x_ git -C "$gitdest" update-server-info ) || :; :
-	else
-		( x_ git -C "$gitdest" pull --all ) || :; :
-	fi
-}
-
-bad_checksum()
-{
-	if e "$2" f missing; then
-		return 0
-	fi
-
-	build_sbase
-	csum="$(x_ "$sha512sum" "$2" | awk '{print $1}')" || \
-	    err "!sha512 '$2' $1" bad_checksum "$@"
-
-	[ "$csum" = "$1" ] && \
-		return 1
-
-	x_ rm -f "$2"
-	printf "BAD SHA512 %s, '%s'; need %s\n" "$csum" "$2" "$1" 1>&2
-}
-
-tmpclone()
-{
-	( x_ git clone "$1" "$2" ) || return 1
-	( x_ git -C "$2" reset --hard "$3" ) || return 1
-
-	[ ! -d "$4" ] && \
-		return 0
-
-	tmpclone_patchlist="`mktemp || err "Can't create tmp patch list"`" || \
-	    err "Can't create tmp patch list" "tmpclone" "$@"
-
-	x_ find "$4" -type f | sort > "$tmpclone_patchlist" || \
-	    err "Can't write patch names to '$tmpclone_patchlist'" \
-	    "tmpclone" "$@"
-
-	while read -r tmpclone_patch; do
-
-		( x_ git -C "$2" am -3 --keep-cr "$tmpclone_patch" ) || \
-		    err "Can't apply '$tmpclone_patch'" "tmpclone" "$@"; :
-
-	done < "$tmpclone_patchlist" || \
-	    err "Can't read '$tmpclone_patchlist'" "tmpclone" "$@"
-
-	x_ rm -f "$tmpclone_patchlist"
-}