diff options
author | Nicholas Chin <nic.c3.14@gmail.com> | 2024-05-20 10:46:25 -0600 |
---|---|---|
committer | Nicholas Chin <nic.c3.14@gmail.com> | 2024-05-20 10:46:25 -0600 |
commit | 8629873a6043067affc137be275b7aa69cb1f10c (patch) | |
tree | 687ef4477eebc28c40c35e987325a72fb1f82b0a /config/submodule/coreboot/dell | |
parent | 1e54db29897786ff49b8ff228ed0b2fbdd8b70dc (diff) |
Fix E6400 display issue with 1440 x 900 panel
The E6400 uses a 100 MHz reference clock on DPLL_REF_SSCLK, whereas
libgfxinit assumed that the reference was always 96 MHz. The frequency
difference caused by a 100 MHz reference with PLL config values
calculated assuming a 96 MHz reference were not significant enough to
cause noticable issues with the more common 1280 x 800 panels, but are
enough to matter for the 1440 x 900 panels which use a higher pixel
clock. This only affected the pre-OS graphics environment provided by
libgfxinit, as Linux drivers would determine the reference clock
frequency based on data in the VBT.
Fix this by making the reference clock frequency in libgfxinit
configurable for GM45 based on a new coreboot Kconfig, which is set to
100 MHz for the E6400.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Diffstat (limited to 'config/submodule/coreboot/dell')
-rw-r--r-- | config/submodule/coreboot/dell/libgfxinit/patches/0001-g45-hw-gfx-gma-plls.adb-Make-reference-clock-frequen.patch | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/config/submodule/coreboot/dell/libgfxinit/patches/0001-g45-hw-gfx-gma-plls.adb-Make-reference-clock-frequen.patch b/config/submodule/coreboot/dell/libgfxinit/patches/0001-g45-hw-gfx-gma-plls.adb-Make-reference-clock-frequen.patch new file mode 100644 index 00000000..6ead9518 --- /dev/null +++ b/config/submodule/coreboot/dell/libgfxinit/patches/0001-g45-hw-gfx-gma-plls.adb-Make-reference-clock-frequen.patch @@ -0,0 +1,42 @@ +From 2c29f01a18d0a104bcc4f785e3901de584d02d7e Mon Sep 17 00:00:00 2001 +From: Nicholas Chin <nic.c3.14@gmail.com> +Date: Mon, 20 May 2024 10:10:03 -0600 +Subject: [PATCH] g45/hw-gfx-gma-plls.adb: Make reference clock frequency + configurable + +Instead of assuming a 96 MHz reference clock frequency, use the value +specified by the new INTEL_GMA_DPLL_REF_FREQ Kconfig. This defaults to +96 MHz to preserve the existing behavior. An example of where this is +needed is the DPLL_REF_SSCLK input, which will typically be 100 MHz +to support LVDS spread spectrum clocking. + +Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> +--- + common/g45/hw-gfx-gma-plls.adb | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/common/g45/hw-gfx-gma-plls.adb b/common/g45/hw-gfx-gma-plls.adb +index 67242f2..1aee576 100644 +--- a/common/g45/hw-gfx-gma-plls.adb ++++ b/common/g45/hw-gfx-gma-plls.adb +@@ -12,6 +12,8 @@ + -- GNU General Public License for more details. + -- + ++with CB.Config ++ + with HW.Time; + with HW.GFX.GMA.Config; + with HW.GFX.GMA.Registers; +@@ -460,7 +462,7 @@ is + (Display => Port_Cfg.Display, + Target_Dotclock => Target_Clock, + -- should be, but doesn't has to be always the same: +- Reference_Clock => 96_000_000, ++ Reference_Clock => CB.Config.INTEL_GMA_DPLL_REF_FREQ, + Best_Clock => Clk, + Valid => Success); + else +-- +2.45.1 + |