coreboot/default: Update to 97bc693ab (2024-07-29)

Several patches are now merged upstream and no longer needed
in lbmk, such as the HP EliteBook 8560w patch, and related
patches. Some patches were changed, for example the Dell Latitude
ivb/snb laptops are now variants in coreboot, instead of being
individual ports; now they re-use the same base code.

This this, the corresponding files under config/submodules
have changed, for things like 3rdparty submodules e.g. libgfxinit,
and tarballs e.g. crossgcc.

This is long overdue, and will enable more boards to be added.
This newer revision will be used in the next release, and some
follow-up patches will merge these trees into default:

* coreboot/haswell
* coreboot/dell

Signed-off-by: Leah Rowe <leah@libreboot.org>

1 files changed, 442 insertions, 0 deletions

diff --git a/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch b/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch
new file mode 100644
index 00000000..cec59dbe
--- /dev/null
+++ b/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch
@@ -0,0 +1,442 @@
+From 39dcb2dcada8821c49a3a042d9e70a6cda81a4ab Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Wed, 7 Feb 2024 10:23:38 -0700
+Subject: [PATCH 22/39] mb/dell: Add Latitude E5520 (Sandy Bridge)
+
+Mainboard is Krug 15". I do not physically have this system; someone
+with physical access to one sent me the output of autoport which I then
+modified to produce this port. I was also sent the VBT binary, which was
+obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
+A14 of the vendor firmware.
+
+This was originally tested and found to be working as a standalone
+board port in Libreboot, but this variant based port in upstream
+coreboot has not been tested.
+
+This can be internally flashed by sending a command to the EC, which
+causes the EC to pull the FDO pin low and the firmware to skip setting
+up any chipset based write protections [1]. The EC is the SMSC MEC5055,
+which seems to be compatible with the existing MEC5035 code.
+
+[1] https://gitlab.com/nic3-14159/dell-flash-unlock
+
+Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/mainboard/dell/snb_ivb_latitude/Kconfig   |  10 +-
+ .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
+ .../snb_ivb_latitude/variants/e5520/data.vbt  | Bin 0 -> 6144 bytes
+ .../variants/e5520/early_init.c               |  14 ++
+ .../snb_ivb_latitude/variants/e5520/gpio.c    | 195 ++++++++++++++++++
+ .../variants/e5520/hda_verb.c                 |  32 +++
+ .../variants/e5520/overridetree.cb            |  39 ++++
+ 7 files changed, 292 insertions(+), 1 deletion(-)
+ create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt
+ create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c
+ create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c
+ create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c
+ create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb
+
+diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
+index 72bdc96c0a..4e94a7ef80 100644
+--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
+@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON
+ 	select SYSTEM_TYPE_LAPTOP
+ 	select USE_NATIVE_RAMINIT
+ 
++config BOARD_DELL_LATITUDE_E5520
++	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
++	select BOARD_ROMSIZE_KB_6144
++	select SOUTHBRIDGE_INTEL_BD82X6X
++
+ config BOARD_DELL_LATITUDE_E6420
+ 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
+ 	select BOARD_ROMSIZE_KB_10240
+@@ -55,6 +60,7 @@ config MAINBOARD_DIR
+ 	default "dell/snb_ivb_latitude"
+ 
+ config MAINBOARD_PART_NUMBER
++	default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520
+ 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
+ 	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
+ 	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
+@@ -68,6 +74,7 @@ config USBDEBUG_HCD_INDEX
+ 	default 2
+ 
+ config VARIANT_DIR
++	default "e5520" if BOARD_DELL_LATITUDE_E5520
+ 	default "e6420" if BOARD_DELL_LATITUDE_E6420
+ 	default "e6520" if BOARD_DELL_LATITUDE_E6520
+ 	default "e5530" if BOARD_DELL_LATITUDE_E5530
+@@ -77,7 +84,8 @@ config VARIANT_DIR
+ config VGA_BIOS_ID
+ 	default "8086,0116" if BOARD_DELL_LATITUDE_E6520
+ 	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
+-	default "8086,0126" if BOARD_DELL_LATITUDE_E6420
++	default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \
++		|| BOARD_DELL_LATITUDE_E5520
+ 	default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \
+ 		|| BOARD_DELL_LATITUDE_E6530
+ 
+diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
+index c7665ac263..7976691f21 100644
+--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
+@@ -1,5 +1,8 @@
+ ## SPDX-License-Identifier: GPL-2.0-only
+ 
++config BOARD_DELL_LATITUDE_E5520
++	bool "Latitude E5520"
++
+ config BOARD_DELL_LATITUDE_E6420
+ 	bool "Latitude E6420"
+ 
+diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt
+new file mode 100644
+index 0000000000000000000000000000000000000000..b511e75262e37fa123d674e9a7b21a8dfe427729
+GIT binary patch
+literal 6144
+zcmeHKZ){Ul6hE);wSBvNZ|mL$bmQOM2BTvXUI!}^N9ejTij1vnu+)Wx6<c9(Y_%K6
+zzOV-@f<ehpWB5RHBpMBgG7}RuMuM2=l*E{6G$wq&gqTQ3#E2RZsOP@dvW*rP7>Fjj
+z&F`Lj?>YC}bI(2Z+}C+6zKyiGrosQXuW7A+&1%<rN+Y1ck(}dLrx)Ma#^x>lnvFGE
+zeD#gB>*#Tq4&j^|7Xcz1r^pp*)g#T}u1Me3ct>Pgls5Qi3!6e2W0%`a-Ic|3efWuR
+zXJ@#}wJyGMTXTcY<%@TBKh@(3hP$Gjv}E}rx-%9D_eLXhYe!c&-VyDg-Cdo1>Biji
+zNNsnlFW#|jdoOj?mZ43m>cVO%UE9@*E7x|%V~c4`XD4l9GCi~@+7pfMibfX8L?!^I
+zc~Rg1I5SxH1DAEZ0{jA41jrJBh#-l;b6^%g7QrThRe)&%tQH_!ggOD7A_PRRgGuI0
+z0zi=n#rCB66d-sO$M~^6wgeb$2fH1|0R`v}xUiWCU`4SF;Dyh&j|mK&6WJWJ&Pq9I
+zVgmFQfh+)vE}(KWwHA|Oh3fSkss|;2E(2i}s1?gRRV%8!K7U={vHD=s#+Fd)W^M1j
+z{R4$??VSvEWpgT=vCM&1-U$bI6CB~IV3Z$$Vv7o!EDnev4j~R(MHsazZ~^fLLKGF4
+zEfQFOa3dZ?1Q1P#&4?!vyAk^k&m&$z3?WV+-b0*1j37o4=MX<3E+eiYge(Ht2umAW
+zOPDmU>UL{flI9u|@JtVvfp#o8ek?VfVV9YP5(%pnZX~{PKq4WoWGmV8t$=Ri@{zLQ
+zNYYt4<$0Ry&qIoG;7s-t333)Nu8opN{NG!)&!I@eO(cVx8vBVEBvotJ7%yNl$7iQ_
+zI=xk30+V$ff`F6<wRoF(TK%j9nsr#H23umU%)_7jNOl%*FPU567qbg;4gtp711nj2
+z#+kHw`v4|5cA+`UMIvAl;slnH1nl0v=xH<al>1}ljxDE1dcda^&!do|r^eJkI?aC-
+zEQMSfm?<w*Unzumkj_w5>VYL6W4=aCiy4rk%xq~5LV?bi|GL2$G7li<%c7yd;6T34
+zQBN5huZ3~6`ChGkpb$Bg5ITb#2iK-qs|1`=sl6Dhn(Lj&8Agt?S{sTDmmtRj7Jm_1
+zFnt{w&FdFkWS3bl>OeL?eO+*i{)9G!cSI-InGt|U0eEYmRCOHm7|I;#LO8ksRIeJ#
+zGe+jTwPg4C4TYuN(9zULV3k+hI$YuPo=%N8oZ#u_4S!3Xelt6N0BmuC`hCNeg+&97
+z6*!>)uHvr%2004GZv?!_-y&|TRmil=9D%Q`1aXBsnD^gov3*UZI34&1_vn(B=T4kZ
+z_A>ClXVIBNaS^hd&^DrU6VgZMYeadMkdFxcktn|ra-Gl;n^I{bt86rCQ=YMry*B!$
+zP5ID9KDE)GZOY#^VwPyRq^y+48j0?ZlzxdkC()CV@`*&wO7vGr;qjA3rb}gIwM-gi
+zx>HsT$mEDj-<OpyWb%zn|B@A3Hkp<!FT5;hrt_SZiy?*wDaIu{h>%Ir=@rh7)SR;b
+zAEWQGv_X1)wq0y5Ha0c~&psIsln<Hiu3;#Lf;%*eI<@?p8cfMJV(IYi8q$NA#iS8`
+z_~|4t4b^wtMSAeFST^F8-Tm<zu8D&j^8=&I4;I}Im>aeSK~X8*^Z9SE44_`P#KIUL
+zf6^N2f>5HCPWM3N+f0MyWOV^kz~!-wVc4MRXOY>4Jsxd1RyBKEMzNf{RKhesKFdbq
+zJ(*d<l2Y#n?E?~iBA39P?~Pr2d#}5=#Sfl-VGzGUF$4U2KcqCIVlwkC(&7PQk_X!a
+z8}3Jgq-&U*Co|h1>l)ZQGyW_x->i#;FvQ*=Nv&nG0N5@D@jjv_Q}K}6MP?1A6`JGe
+zDwj9pN+x;T4>`I9e5x(uqdK#OGB31ikk@Xv=dxLb4fx(;ktX@rOb~M~?dYQQYiPia
+z8r;jUQ?sd2@3||-cb2Eb%JFYfxHsONoaJ^eqoKN{<g9?-%`7oWz+aJS0tEc!^d@hD
+z1-I{%hr!Y?0uVZpUbl__37xn@jkD6Z>3SATgBQlEoN7&ZV9Eni9+>jLln16fFy(=V
+H=7E0zE^L4Z
+
+literal 0
+HcmV?d00001
+
+diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c
+new file mode 100644
+index 0000000000..ff83db095b
+--- /dev/null
++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c
+@@ -0,0 +1,14 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <bootblock_common.h>
++#include <device/pci_ops.h>
++#include <ec/dell/mec5035/mec5035.h>
++#include <southbridge/intel/bd82x6x/pch.h>
++
++void bootblock_mainboard_early_init(void)
++{
++	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
++			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
++			| COMB_LPC_EN | COMA_LPC_EN);
++	mec5035_early_init();
++}
+diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c
+new file mode 100644
+index 0000000000..f76b93d9f0
+--- /dev/null
++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c
+@@ -0,0 +1,195 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <southbridge/intel/common/gpio.h>
++
++static const struct pch_gpio_set1 pch_gpio_set1_mode = {
++	.gpio0 = GPIO_MODE_GPIO,
++	.gpio1 = GPIO_MODE_NATIVE,
++	.gpio2 = GPIO_MODE_GPIO,
++	.gpio3 = GPIO_MODE_GPIO,
++	.gpio4 = GPIO_MODE_GPIO,
++	.gpio5 = GPIO_MODE_NATIVE,
++	.gpio6 = GPIO_MODE_GPIO,
++	.gpio7 = GPIO_MODE_GPIO,
++	.gpio8 = GPIO_MODE_GPIO,
++	.gpio9 = GPIO_MODE_NATIVE,
++	.gpio10 = GPIO_MODE_NATIVE,
++	.gpio11 = GPIO_MODE_NATIVE,
++	.gpio12 = GPIO_MODE_GPIO,
++	.gpio13 = GPIO_MODE_GPIO,
++	.gpio14 = GPIO_MODE_GPIO,
++	.gpio15 = GPIO_MODE_GPIO,
++	.gpio16 = GPIO_MODE_NATIVE,
++	.gpio17 = GPIO_MODE_GPIO,
++	.gpio18 = GPIO_MODE_NATIVE,
++	.gpio19 = GPIO_MODE_GPIO,
++	.gpio20 = GPIO_MODE_NATIVE,
++	.gpio21 = GPIO_MODE_GPIO,
++	.gpio22 = GPIO_MODE_GPIO,
++	.gpio23 = GPIO_MODE_NATIVE,
++	.gpio24 = GPIO_MODE_GPIO,
++	.gpio25 = GPIO_MODE_NATIVE,
++	.gpio26 = GPIO_MODE_NATIVE,
++	.gpio27 = GPIO_MODE_GPIO,
++	.gpio28 = GPIO_MODE_GPIO,
++	.gpio29 = GPIO_MODE_GPIO,
++	.gpio30 = GPIO_MODE_GPIO,
++	.gpio31 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_direction = {
++	.gpio0 = GPIO_DIR_INPUT,
++	.gpio2 = GPIO_DIR_INPUT,
++	.gpio3 = GPIO_DIR_INPUT,
++	.gpio4 = GPIO_DIR_INPUT,
++	.gpio6 = GPIO_DIR_INPUT,
++	.gpio7 = GPIO_DIR_INPUT,
++	.gpio8 = GPIO_DIR_INPUT,
++	.gpio12 = GPIO_DIR_OUTPUT,
++	.gpio13 = GPIO_DIR_INPUT,
++	.gpio14 = GPIO_DIR_INPUT,
++	.gpio15 = GPIO_DIR_INPUT,
++	.gpio17 = GPIO_DIR_INPUT,
++	.gpio19 = GPIO_DIR_INPUT,
++	.gpio21 = GPIO_DIR_INPUT,
++	.gpio22 = GPIO_DIR_INPUT,
++	.gpio24 = GPIO_DIR_INPUT,
++	.gpio27 = GPIO_DIR_INPUT,
++	.gpio28 = GPIO_DIR_INPUT,
++	.gpio29 = GPIO_DIR_INPUT,
++	.gpio30 = GPIO_DIR_OUTPUT,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_level = {
++	.gpio12 = GPIO_LEVEL_HIGH,
++	.gpio30 = GPIO_LEVEL_HIGH,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_reset = {
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_invert = {
++	.gpio0 = GPIO_INVERT,
++	.gpio8 = GPIO_INVERT,
++	.gpio14 = GPIO_INVERT,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_blink = {
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_mode = {
++	.gpio32 = GPIO_MODE_NATIVE,
++	.gpio33 = GPIO_MODE_GPIO,
++	.gpio34 = GPIO_MODE_GPIO,
++	.gpio35 = GPIO_MODE_GPIO,
++	.gpio36 = GPIO_MODE_GPIO,
++	.gpio37 = GPIO_MODE_GPIO,
++	.gpio38 = GPIO_MODE_GPIO,
++	.gpio39 = GPIO_MODE_GPIO,
++	.gpio40 = GPIO_MODE_NATIVE,
++	.gpio41 = GPIO_MODE_NATIVE,
++	.gpio42 = GPIO_MODE_NATIVE,
++	.gpio43 = GPIO_MODE_NATIVE,
++	.gpio44 = GPIO_MODE_NATIVE,
++	.gpio45 = GPIO_MODE_NATIVE,
++	.gpio46 = GPIO_MODE_GPIO,
++	.gpio47 = GPIO_MODE_NATIVE,
++	.gpio48 = GPIO_MODE_GPIO,
++	.gpio49 = GPIO_MODE_NATIVE,
++	.gpio50 = GPIO_MODE_GPIO,
++	.gpio51 = GPIO_MODE_GPIO,
++	.gpio52 = GPIO_MODE_GPIO,
++	.gpio53 = GPIO_MODE_GPIO,
++	.gpio54 = GPIO_MODE_GPIO,
++	.gpio55 = GPIO_MODE_GPIO,
++	.gpio56 = GPIO_MODE_GPIO,
++	.gpio57 = GPIO_MODE_GPIO,
++	.gpio58 = GPIO_MODE_NATIVE,
++	.gpio59 = GPIO_MODE_NATIVE,
++	.gpio60 = GPIO_MODE_GPIO,
++	.gpio61 = GPIO_MODE_NATIVE,
++	.gpio62 = GPIO_MODE_NATIVE,
++	.gpio63 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_direction = {
++	.gpio33 = GPIO_DIR_INPUT,
++	.gpio34 = GPIO_DIR_OUTPUT,
++	.gpio35 = GPIO_DIR_INPUT,
++	.gpio36 = GPIO_DIR_INPUT,
++	.gpio37 = GPIO_DIR_OUTPUT,
++	.gpio38 = GPIO_DIR_INPUT,
++	.gpio39 = GPIO_DIR_INPUT,
++	.gpio46 = GPIO_DIR_OUTPUT,
++	.gpio48 = GPIO_DIR_INPUT,
++	.gpio50 = GPIO_DIR_OUTPUT,
++	.gpio51 = GPIO_DIR_OUTPUT,
++	.gpio52 = GPIO_DIR_INPUT,
++	.gpio53 = GPIO_DIR_INPUT,
++	.gpio54 = GPIO_DIR_INPUT,
++	.gpio55 = GPIO_DIR_OUTPUT,
++	.gpio56 = GPIO_DIR_INPUT,
++	.gpio57 = GPIO_DIR_INPUT,
++	.gpio60 = GPIO_DIR_OUTPUT,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_level = {
++	.gpio34 = GPIO_LEVEL_LOW,
++	.gpio37 = GPIO_LEVEL_LOW,
++	.gpio46 = GPIO_LEVEL_HIGH,
++	.gpio50 = GPIO_LEVEL_HIGH,
++	.gpio51 = GPIO_LEVEL_LOW,
++	.gpio55 = GPIO_LEVEL_LOW,
++	.gpio60 = GPIO_LEVEL_HIGH,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_reset = {
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_mode = {
++	.gpio64 = GPIO_MODE_NATIVE,
++	.gpio65 = GPIO_MODE_NATIVE,
++	.gpio66 = GPIO_MODE_NATIVE,
++	.gpio67 = GPIO_MODE_NATIVE,
++	.gpio68 = GPIO_MODE_NATIVE,
++	.gpio69 = GPIO_MODE_NATIVE,
++	.gpio70 = GPIO_MODE_NATIVE,
++	.gpio71 = GPIO_MODE_NATIVE,
++	.gpio72 = GPIO_MODE_NATIVE,
++	.gpio73 = GPIO_MODE_NATIVE,
++	.gpio74 = GPIO_MODE_GPIO,
++	.gpio75 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_direction = {
++	.gpio74 = GPIO_DIR_INPUT,
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_level = {
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_reset = {
++};
++
++const struct pch_gpio_map mainboard_gpio_map = {
++	.set1 = {
++		.mode		= &pch_gpio_set1_mode,
++		.direction	= &pch_gpio_set1_direction,
++		.level		= &pch_gpio_set1_level,
++		.blink		= &pch_gpio_set1_blink,
++		.invert		= &pch_gpio_set1_invert,
++		.reset		= &pch_gpio_set1_reset,
++	},
++	.set2 = {
++		.mode		= &pch_gpio_set2_mode,
++		.direction	= &pch_gpio_set2_direction,
++		.level		= &pch_gpio_set2_level,
++		.reset		= &pch_gpio_set2_reset,
++	},
++	.set3 = {
++		.mode		= &pch_gpio_set3_mode,
++		.direction	= &pch_gpio_set3_direction,
++		.level		= &pch_gpio_set3_level,
++		.reset		= &pch_gpio_set3_reset,
++	},
++};
+diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c
+new file mode 100644
+index 0000000000..1373975352
+--- /dev/null
++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c
+@@ -0,0 +1,32 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <device/azalia_device.h>
++
++const u32 cim_verb_data[] = {
++	0x111d76e7,	/* Codec Vendor / Device ID: IDT */
++	0x1028049a,	/* Subsystem ID */
++	11,		/* Number of 4 dword sets */
++	AZALIA_SUBVENDOR(0, 0x1028049a),
++	AZALIA_PIN_CFG(0, 0x0a, 0x04a11020),
++	AZALIA_PIN_CFG(0, 0x0b, 0x0421101f),
++	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
++	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
++	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
++	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
++	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
++	AZALIA_PIN_CFG(0, 0x11, 0xd5a301a0),
++	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
++	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
++
++	0x80862805,	/* Codec Vendor / Device ID: Intel */
++	0x80860101,	/* Subsystem ID */
++	4,		/* Number of 4 dword sets */
++	AZALIA_SUBVENDOR(3, 0x80860101),
++	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
++	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
++	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
++};
++
++const u32 pc_beep_verbs[0] = {};
++
++AZALIA_ARRAY_SIZES;
+diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb
+new file mode 100644
+index 0000000000..479d1b696e
+--- /dev/null
++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb
+@@ -0,0 +1,39 @@
++## SPDX-License-Identifier: GPL-2.0-or-later
++
++chip northbridge/intel/sandybridge
++	device domain 0 on
++		subsystemid 0x1028 0x049a inherit
++
++		device ref igd on
++			register "gpu_cpu_backlight" = "0x00000218"
++			register "gpu_pch_backlight" = "0x13121312"
++		end
++
++		chip southbridge/intel/bd82x6x
++			register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }"
++			register "usb_port_config" = "{
++				{ 1, 1, 0 },
++				{ 1, 1, 0 },
++				{ 1, 1, 1 },
++				{ 1, 1, 1 },
++				{ 1, 1, 2 },
++				{ 1, 1, 2 },
++				{ 1, 1, 3 },
++				{ 1, 1, 3 },
++				{ 1, 1, 5 },
++				{ 1, 1, 5 },
++				{ 1, 1, 7 },
++				{ 1, 1, 6 },
++				{ 1, 1, 6 },
++				{ 1, 1, 7 },
++			}"
++
++			device ref gbe off end
++			device ref pcie_rp4 off end
++			device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet
++			device ref sata1 on
++				register "sata_port_map" = "0x3b"
++			end
++		end
++	end
++end
+-- 
+2.39.2
+