#!/usr/bin/env sh # SPDX-License-Identifier: GPL-3.0-or-later # Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> # Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> # Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com> # Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com> # Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com> set -u -e . "include/lib.sh" tmprom="$TMPDIR/rom" seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin" cfgsdir="config/coreboot" rp2040src="src/pico-serprog" rp2040x="$rp2040src/build/pico_serprog.uf2" picosdk="src/pico-sdk" rp2040dir="$picosdk/src/boards/include/boards" stm32src="src/stm32-vserprog" stm32x="$stm32src/stm32-vserprog.hex" stm32dir="$stm32src/boards" # Disable all payloads by default. # target.cfg files have to specifically enable [a] payload(s) pv="payload_uboot payload_seabios payload_memtest payload_grub" v="romdir initmode displaymode targetdir tree release ubootelf" v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv" eval `setvars "n" $pv` eval `setvars "" $v boards targets serdir ser` main() { while [ $# -gt 0 ]; do if [ "$1" = "serprog" ]; then [ $# -lt 2 ] && $err "serprog type not set" [ "$2" != "rp2040" ] && [ "$2" != "stm32" ] && \ $err "invalid serprog type" eval "x_ ./update trees -f \"\${${2}src##*/}\"" ser="$2" && shift 2 && continue fi [ "$1$ser" = "list" ] && x_ ls -1 config/coreboot && return [ "$1" = "all" ] && shift && continue boards="$1 $boards"; shift 1 done [ -n "$boards" ] || [ -n "$ser" ] || boards="$(ls -1 \ config/coreboot)" || $err "can't list coreboot boards" [ -n "$ser" ] && \ eval "serlist \"\$${ser}dir\" > \"\$TMPDIR/ser\" || $err \"!ser\"" [ -n "$ser" ] && [ -z "$boards" ] && boards="$(cat "$TMPDIR/ser")" for x in $boards; do [ -n "$ser" ] && mkserprogfw "$ser" "$x" [ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \ configure_target "$x" && build_roms && \ [ -d "bin/$board" ] && targets="$targets, $x" && \ [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$x" done [ -n "$ser" ] && [ "$XBMK_RELEASE" = "y" ] && \ mkrom_tarball "bin/serprog_$ser" && return 0 [ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled" [ -z "$ser" ] && printf "ROMs built in bin/ for: %s\n" "${targets#, }" [ -n "$ser" ] && printf "ROMs (serprog) built in bin/%s/\n" "$ser" printf "Please flash from bin/, NOT elf/ - ALSO:\n%s\n" "$kbnotice" } mkserprogfw() { x_ mkdir -p "bin/serprog_$1" [ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \ -DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \ x_ cmake --build "$rp2040src/build" [ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \ BOARD=$2 && x_ make -C "$stm32src" BOARD=$2 eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\"" } serlist() { basename -a -s .h "$1/"*.h || $err "$1: can't list boards" } configure_target() { eval `setvars "n" $pv` eval `setvars "" $v` board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board" # Override the above defaults using target.cfg eval `setcfg "$targetdir/target.cfg"` [ -z "$tree" ] && $err "$board: tree not defined" [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1 [ "$board" = "$tree" ] && return 1 x_ ./update trees -b coreboot $board cbdir="src/coreboot/$tree" cbfstool="elf/cbfstool/$tree/cbfstool" [ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree [ -n "$uboot_config" ] || uboot_config="default" [ "$payload_uboot" = "y" ] || payload_seabios="y" [ "$payload_grub" = "y" ] && payload_seabios="y" [ "$payload_seabios" = "y" ] && [ -n "$payload_uboot" = "y" ] && \ $err "$board: U-Boot and SeaBIOS/GRUB are both enabled." [ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata" [ -n "$grubtree" ] || grubtree="default" grubelf="elf/grub/$grubtree/payload/grub.elf" [ "$payload_memtest" = "y" ] || payload_memtest="n" [ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0 } build_roms() { x_ rm -Rf "$romdir" for cbcfg in "$targetdir/config/"*; do [ -f "$cbcfg" ] || continue; cn="${cbcfg##*/}"; dt="${cn#*_}" \ && [ "$dt" = "$cn" ] && dt="txtmode"; displaymode="$dt" initmode="${cn%%_*}"; chkvars initmode displaymode e "$cbcfg" f not || add_payloads done; x_ rm -f "$tmprom" } add_payloads() { cbuild="$cbelfdir/$board/${initmode}_$displaymode" [ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}" x_ cp "$cbuild/coreboot.rom" "$tmprom" [ "$payload_seabios" = "y" ] && add_seabios_payload [ "$payload_uboot" = "y" ] || return 0 # add u-boot payload ubdir="elf/u-boot/$board/$uboot_config"; ubootelf="$ubdir/u-boot.elf" \ && [ ! -f "$ubootelf" ] && ubootelf="$ubdir/u-boot" [ -f "$ubootelf" ] || x_ ./update trees -b u-boot $board [ -f "$ubootelf" ] || $err "$board: Can't find u-boot" cbfs "$tmprom" "$ubootelf" "fallback/payload" cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom" } add_seabios_payload() { _seabioself="elf/seabios/default/$initmode/bios.bin.elf" x_ ./update trees -b seabios pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub" newrom="$romdir/${pstr}_${board}_$initmode.rom" [ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom" cbfs "$tmprom" "$_seabioself" "fallback/payload" x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup z="2"; [ "$initmode" = "vgarom" ] && z="0" x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum [ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \ vgaroms/seavgabios.bin raw if [ "$payload_grub" = "y" ]; then x_ ./update trees -b grub $grubtree cbfs "$tmprom" "$grubelf" "img/grub2" printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \ > "$TMPDIR/tmpcfg" || $err "$board: !insert scandisk" cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw fi [ "$payload_memtest" = "y" ] && x_ ./update trees -b memtest86plus && \ cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest cprom "$newrom" && [ "$payload_grub" = "y" ] && \ cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \ cprom "${newrom%.rom}_grubfirst.rom"; return 0 } cprom() { x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1" [ "$XBMK_RELEASE" = "y" ] && mksha512sum "$1" "vendorhashes" && \ x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0 } main $@