From 9bfb8614dbf1d9800ef8251cb3d839bcdbe5577f Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Fri, 6 May 2022 23:17:39 +0200 Subject: [PATCH 05/26] sb/intel/lynxpoint: Add native USB init Implement native USB initialisation for Lynx Point. This is only needed when MRC.bin is not used. TO DO: Figure out how to deal with the FIXME's and TODO's lying around. Change-Id: Ie0fbeeca7b1ca1557173772d733fd2fa27703373 Signed-off-by: Angel Pons --- .../haswell/native_raminit/raminit_native.c | 3 + src/southbridge/intel/lynxpoint/Makefile.inc | 2 +- src/southbridge/intel/lynxpoint/early_usb.c | 11 - .../intel/lynxpoint/early_usb_native.c | 584 ++++++++++++++++++ src/southbridge/intel/lynxpoint/pch.h | 49 ++ 5 files changed, 637 insertions(+), 12 deletions(-) create mode 100644 src/southbridge/intel/lynxpoint/early_usb_native.c diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c index 6a002548c1..ef61d4ee09 100644 --- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c +++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c @@ -5,6 +5,7 @@ #include #include #include +#include #include static bool early_init_native(int s3resume) @@ -15,6 +16,8 @@ static bool early_init_native(int s3resume) /** TODO: CPU replacement check must be skipped in warm boots and S3 resumes **/ const bool cpu_replaced = !s3resume && intel_early_me_cpu_replacement_check(); + early_usb_init(); + if (!CONFIG(INTEL_LYNXPOINT_LP)) dmi_early_init(); diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc index b8503ac8bc..0e1f2fe4eb 100644 --- a/src/southbridge/intel/lynxpoint/Makefile.inc +++ b/src/southbridge/intel/lynxpoint/Makefile.inc @@ -37,7 +37,7 @@ bootblock-y += early_pch.c romstage-y += early_usb.c early_me.c me_status.c early_pch.c romstage-y += pmutil.c -romstage-$(CONFIG_USE_NATIVE_RAMINIT) += early_pch_native.c +romstage-$(CONFIG_USE_NATIVE_RAMINIT) += early_pch_native.c early_usb_native.c iobp.c ifeq ($(CONFIG_INTEL_LYNXPOINT_LP),y) romstage-y += lp_gpio.c diff --git a/src/southbridge/intel/lynxpoint/early_usb.c b/src/southbridge/intel/lynxpoint/early_usb.c index a753681ce0..52e8ac17f8 100644 --- a/src/southbridge/intel/lynxpoint/early_usb.c +++ b/src/southbridge/intel/lynxpoint/early_usb.c @@ -4,17 +4,6 @@ #include #include "pch.h" -/* HCD_INDEX == 2 selects 0:1a.0 (PCH_EHCI2), any other index - * selects 0:1d.0 (PCH_EHCI1) for usbdebug use. - */ -#if CONFIG_USBDEBUG_HCD_INDEX != 2 -#define PCH_EHCI1_TEMP_BAR0 CONFIG_EHCI_BAR -#define PCH_EHCI2_TEMP_BAR0 (PCH_EHCI1_TEMP_BAR0 + 0x400) -#else -#define PCH_EHCI2_TEMP_BAR0 CONFIG_EHCI_BAR -#define PCH_EHCI1_TEMP_BAR0 (PCH_EHCI2_TEMP_BAR0 + 0x400) -#endif - /* * Setup USB controller MMIO BAR to prevent the * reference code from resetting the controller. diff --git a/src/southbridge/intel/lynxpoint/early_usb_native.c b/src/southbridge/intel/lynxpoint/early_usb_native.c new file mode 100644 index 0000000000..cb6f6ee8e6 --- /dev/null +++ b/src/southbridge/intel/lynxpoint/early_usb_native.c @@ -0,0 +1,584 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static unsigned int is_usbr_enabled(void) +{ + return !!(pci_read_config32(PCH_XHCI_DEV, XHCI_USB3FUS) & BIT(5)); +} + +static char *const xhci_bar = (char *)PCH_XHCI_TEMP_BAR0; + +static void ehci_hcs_init(const pci_devfn_t dev, const uintptr_t ehci_bar) +{ + pci_write_config32(dev, PCI_BASE_ADDRESS_0, ehci_bar); + + /** FIXME: Determine whether Bus Master is required (or clean it up afterwards) **/ + pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + + char *const mem_bar = (char *)ehci_bar; + + /** + * Shared EHCI/XHCI ports w/a. + * This step is required when some of the ports are routed to EHCI + * and other ports are routed XHCI at the same time. + * + * FIXME: Under which conditions should this be done? + */ + pci_and_config16(dev, 0x78, ~0x03); + + /* Skip reset if usbdebug is enabled */ + if (!CONFIG(USBDEBUG_IN_PRE_RAM)) + setbits32(mem_bar + EHCI_USB_CMD, EHCI_USB_CMD_HCRESET); + + /* 2: Configure number of controllers and ports */ + pci_or_config16(dev, EHCI_ACCESS_CNTL, ACCESS_CNTL_ENABLE); + clrsetbits32(mem_bar + EHCI_HCS_PARAMS, 0xf << 12, 0); + clrsetbits32(mem_bar + EHCI_HCS_PARAMS, 0xf << 0, 2 + is_usbr_enabled()); + pci_and_config16(dev, EHCI_ACCESS_CNTL, ~ACCESS_CNTL_ENABLE); + + pci_or_config16(dev, 0x78, BIT(2)); + pci_or_config16(dev, 0x7c, BIT(14) | BIT(7)); + pci_update_config32(dev, 0x8c, ~(0xf << 8), (4 << 8)); + pci_update_config32(dev, 0x8c, ~BIT(26), BIT(17)); +} + +static inline unsigned int physical_port_count(void) +{ + return MAX_USB2_PORTS; +} + +static unsigned int hs_port_count(void) +{ + /** TODO: Apparently, WPT-LP has 10 USB2 ports **/ + if (CONFIG(INTEL_LYNXPOINT_LP)) + return 8; + + switch ((pci_read_config32(PCH_XHCI_DEV, XHCI_USB3FUS) >> 1) & 3) { + case 3: + return 8; + case 2: + return 10; + case 1: + return 12; + case 0: + default: + return 14; + } +} + +static unsigned int ss_port_count(void) +{ + if (CONFIG(INTEL_LYNXPOINT_LP)) + return 4; + + switch ((pci_read_config32(PCH_XHCI_DEV, XHCI_USB3FUS) >> 3) & 3) { + case 3: + return 0; + case 2: + return 2; + case 1: + return 4; + case 0: + default: + return 6; + } +} + +static void common_ehci_hcs_init(void) +{ + const bool is_lp = CONFIG(INTEL_LYNXPOINT_LP); + + ehci_hcs_init(PCH_EHCI1_DEV, PCH_EHCI1_TEMP_BAR0); + if (!is_lp) + ehci_hcs_init(PCH_EHCI2_DEV, PCH_EHCI2_TEMP_BAR0); + + pch_iobp_update(0xe5007f04, 0, 0x00004481); + + for (unsigned int port = 0; port < physical_port_count(); port++) + pch_iobp_update(0xe500400f + port * 0x100, ~(1 << 0), 0 << 0); + + pch_iobp_update(0xe5007f14, ~(3 << 19), (3 << 19)); + + if (is_lp) + pch_iobp_update(0xe5007f02, ~(3 << 22), (0 << 22)); +} + +static void xhci_open_memory_space(void) +{ + /** FIXME: Determine whether Bus Master is required (or clean it up afterwards) **/ + pci_write_config32(PCH_XHCI_DEV, PCI_BASE_ADDRESS_0, (uintptr_t)xhci_bar); + pci_or_config16(PCH_XHCI_DEV, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); +} + +static void xhci_close_memory_space(void) +{ + pci_and_config16(PCH_XHCI_DEV, PCI_COMMAND, ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)); + pci_write_config32(PCH_XHCI_DEV, PCI_BASE_ADDRESS_0, 0); +} + +static void common_xhci_hc_init(void) +{ + const bool is_lp = CONFIG(INTEL_LYNXPOINT_LP); + + if (!is_lp) { + const unsigned int max_ports = 15 + ss_port_count(); + clrsetbits32(xhci_bar + XHCI_HCS_PARAMS_1, 0xf << 28, max_ports << 28); + } + + clrsetbits32(xhci_bar + XHCI_HCS_PARAMS_3, 0xffff << 16 | 0xff, 0x200 << 16 | 0x0a); + clrsetbits32(xhci_bar + XHCI_HCC_PARAMS, BIT(5), BIT(10) | BIT(9)); + + if (!is_lp) + clrsetbits32(xhci_bar + 0x8008, BIT(19), 0); + + if (is_lp) + clrsetbits32(xhci_bar + 0x8058, BIT(8), BIT(16)); + else + clrsetbits32(xhci_bar + 0x8058, BIT(8), BIT(16) | BIT(20)); + + clrsetbits32(xhci_bar + 0x8060, 0, BIT(25) | BIT(18)); + clrsetbits32(xhci_bar + 0x8090, 0, BIT(14) | BIT(8)); + clrsetbits32(xhci_bar + 0x8094, 0, BIT(23) | BIT(21) | BIT(14)); + clrsetbits32(xhci_bar + 0x80e0, BIT(16), BIT(6)); + clrsetbits32(xhci_bar + 0x80ec, (7 << 12) | (7 << 9), (0 << 12) | (6 << 9)); + clrsetbits32(xhci_bar + 0x80f0, BIT(20), 0); + + if (is_lp) + clrsetbits32(xhci_bar + 0x80fc, 0, BIT(25)); + + if (is_lp) + clrsetbits32(xhci_bar + 0x8110, BIT(8) | BIT(2), BIT(20) | BIT(11)); + else + clrsetbits32(xhci_bar + 0x8110, BIT(2), BIT(20) | BIT(11)); + + if (is_lp) + write32(xhci_bar + 0x8140, 0xff00f03c); + else + write32(xhci_bar + 0x8140, 0xff03c132); + + if (is_lp) + clrsetbits32(xhci_bar + 0x8154, BIT(21), BIT(13)); + else + clrsetbits32(xhci_bar + 0x8154, BIT(21) | BIT(13), 0); + + clrsetbits32(xhci_bar + 0x8154, BIT(3), 0); + + if (is_lp) { + clrsetbits32(xhci_bar + 0x8164, 0, BIT(1) | BIT(0)); + write32(xhci_bar + 0x8174, 0x01400c0a); + write32(xhci_bar + 0x817c, 0x033200a3); + write32(xhci_bar + 0x8180, 0x00cb0028); + write32(xhci_bar + 0x8184, 0x0064001e); + } + + /* + * Note: Register at offset 0x44 is 32-bit, but bit 31 is write-once. + * We use these weird partial accesses here to avoid locking bit 31. + */ + pci_or_config16(PCH_XHCI_DEV, 0x44, BIT(15) | BIT(14) | BIT(10) | BIT(0)); + pci_or_config8(PCH_XHCI_DEV, 0x44 + 2, 0x0f); + + /* LPT-LP >= B0 */ + if (is_lp) + clrsetbits32(xhci_bar + 0x8188, 0, BIT(26) | BIT(24)); + + /* LPT-H >= C0 */ + if (!is_lp) + clrsetbits32(xhci_bar + 0x8188, 0, BIT(24)); +} + +static inline bool is_mem_sr(void) +{ + return pci_read_config16(PCH_LPC_DEV, GEN_PMCON_2) & GEN_PMCON_2_MEM_SR; +} + +static bool should_restore_xhci_smart_auto(void) +{ + if (!is_mem_sr()) + return false; + + return pci_read_config32(PCH_LPC_DEV, PMIR) & PMIR_XHCI_SMART_AUTO; +} + +enum usb_port_route { + ROUTE_TO_EHCI, + ROUTE_TO_XHCI, +}; + +/* Returns whether port reset was successful */ +static bool reset_usb2_ports(const unsigned int ehci_ports) +{ + for (unsigned int port = 0; port < ehci_ports; port++) { + /* Initiate port reset for all USB2 ports */ + clrsetbits32( + xhci_bar + XHCI_USB2_PORTSC(port), + XHCI_USB2_PORTSC_PED, + XHCI_USB2_PORTSC_PR); + } + /* Poll for port reset bit to be cleared or time out at 100ms */ + struct stopwatch timer; + stopwatch_init_msecs_expire(&timer, 100); + uint32_t reg32; + do { + reg32 = 0; + for (unsigned int port = 0; port < ehci_ports; port++) + reg32 |= read32(xhci_bar + XHCI_USB2_PORTSC(port)); + + reg32 &= XHCI_USB2_PORTSC_PR; + if (!reg32) { + const long elapsed_time = stopwatch_duration_usecs(&timer); + printk(BIOS_DEBUG, "%s: took %lu usecs\n", __func__, elapsed_time); + return true; + } + /* Reference code has a 10 ms delay here, but a smaller delay works too */ + udelay(100); + } while (!stopwatch_expired(&timer)); + printk(BIOS_ERR, "%s: timed out\n", __func__); + return !reg32; +} + +/* Returns whether warm reset was successful */ +static bool warm_reset_usb3_ports(const unsigned int xhci_ports) +{ + for (unsigned int port = 0; port < xhci_ports; port++) { + /* Initiate warm reset for all USB3 ports */ + clrsetbits32( + xhci_bar + XHCI_USB3_PORTSC(port), + XHCI_USB3_PORTSC_PED, + XHCI_USB3_PORTSC_WPR); + } + /* Poll for port reset bit to be cleared or time out at 100ms */ + struct stopwatch timer; + stopwatch_init_msecs_expire(&timer, 100); + uint32_t reg32; + do { + reg32 = 0; + for (unsigned int port = 0; port < xhci_ports; port++) + reg32 |= read32(xhci_bar + XHCI_USB3_PORTSC(port)); + + reg32 &= XHCI_USB3_PORTSC_PR; + if (!reg32) { + const long elapsed_time = stopwatch_duration_usecs(&timer); + printk(BIOS_DEBUG, "%s: took %lu usecs\n", __func__, elapsed_time); + return true; + } + /* Reference code has a 10 ms delay here, but a smaller delay works too */ + udelay(100); + } while (!stopwatch_expired(&timer)); + printk(BIOS_ERR, "%s: timed out\n", __func__); + return !reg32; +} + +static void perform_xhci_ehci_switching_flow(const enum usb_port_route usb_route) +{ + const pci_devfn_t dev = PCH_XHCI_DEV; + + const unsigned int ehci_ports = hs_port_count() + is_usbr_enabled(); + const unsigned int xhci_ports = ss_port_count(); + + const uint32_t ehci_mask = BIT(ehci_ports) - 1; + const uint32_t xhci_mask = BIT(xhci_ports) - 1; + + /** TODO: Handle USBr port? How, though? **/ + pci_update_config32(dev, XHCI_USB2PRM, ~XHCI_USB2PR_HCSEL, ehci_mask); + pci_update_config32(dev, XHCI_USB3PRM, ~XHCI_USB3PR_SSEN, xhci_mask); + + /* + * Workaround for USB2PR / USB3PR value not surviving warm reset. + * Restore USB Port Routing registers if OS HC Switch driver has been executed. + */ + if (should_restore_xhci_smart_auto()) { + /** FIXME: Derive values from mainboard code instead? **/ + pci_update_config32(dev, XHCI_USB2PR, ~XHCI_USB2PR_HCSEL, ehci_mask); + pci_update_config32(dev, XHCI_USB3PR, ~XHCI_USB3PR_SSEN, xhci_mask); + } + + /* Later stages shouldn't need the value of this bit */ + pci_and_config32(PCH_LPC_DEV, PMIR, ~PMIR_XHCI_SMART_AUTO); + + /** + * FIXME: Things here depend on the chosen routing mode. + * For now, implement both functions. + */ + + /* Route to EHCI if xHCI disabled or auto mode */ + if (usb_route == ROUTE_TO_EHCI) { + if (!reset_usb2_ports(ehci_ports)) + printk(BIOS_ERR, "USB2 port reset timed out\n"); + + pci_and_config32(dev, XHCI_USB2PR, ~XHCI_USB2PR_HCSEL); + + for (unsigned int port = 0; port < ehci_ports; port++) { + clrsetbits32( + xhci_bar + XHCI_USB2_PORTSC(port), + XHCI_USB2_PORTSC_PED, + XHCI_USB2_PORTSC_CHST); + } + + if (!warm_reset_usb3_ports(xhci_ports)) + printk(BIOS_ERR, "USB3 warm reset timed out\n"); + + /* FIXME: BWG says this should be inside the warm reset function */ + pci_and_config32(dev, XHCI_USB3PR, ~XHCI_USB3PR_SSEN); + + for (unsigned int port = 0; port < ehci_ports; port++) { + clrsetbits32( + xhci_bar + XHCI_USB3_PORTSC(port), + XHCI_USB3_PORTSC_PED, + XHCI_USB3_PORTSC_CHST); + } + + setbits32(xhci_bar + XHCI_USBCMD, BIT(0)); + clrbits32(xhci_bar + XHCI_USBCMD, BIT(0)); + } + + /* Route to xHCI if xHCI enabled */ + if (usb_route == ROUTE_TO_XHCI) { + if (is_mem_sr()) { + if (!warm_reset_usb3_ports(xhci_ports)) + printk(BIOS_ERR, "USB3 warm reset timed out\n"); + } + + const uint32_t xhci_port_mask = pci_read_config32(dev, XHCI_USB3PRM) & 0x3f; + pci_update_config32(dev, XHCI_USB3PR, ~XHCI_USB3PR_SSEN, xhci_port_mask); + + const uint32_t ehci_port_mask = pci_read_config32(dev, XHCI_USB2PRM) & 0x7fff; + pci_update_config32(dev, XHCI_USB2PR, ~XHCI_USB2PR_HCSEL, ehci_port_mask); + } +} + +/* Do not shift in this macro, as it can cause undefined behaviour for bad port/oc values */ +#define PORT_TO_OC_SHIFT(port, oc) ((oc) * 8 + (port)) + +/* Avoid shifting into undefined behaviour */ +static inline bool shift_ok(const int shift) +{ + return shift >= 0 && shift < 32; +} + +static void usb_overcurrent_mapping(void) +{ + const bool is_lp = CONFIG(INTEL_LYNXPOINT_LP); + + uint32_t ehci_1_ocmap = 0; + uint32_t ehci_2_ocmap = 0; + uint32_t xhci_1_ocmap = 0; + uint32_t xhci_2_ocmap = 0; + + /* + * EHCI + */ + for (unsigned int idx = 0; idx < physical_port_count(); idx++) { + const struct usb2_port_config *const port = &mainboard_usb2_ports[idx]; + printk(BIOS_DEBUG, "USB2 port %u => ", idx); + if (!port->enable) { + printk(BIOS_DEBUG, "disabled\n"); + continue; + } + const unsigned short oc_pin = port->oc_pin; + if (oc_pin == USB_OC_PIN_SKIP) { + printk(BIOS_DEBUG, "not mapped to OC pin\n"); + continue; + } + /* Ports 0 .. 7 => OC 0 .. 3 */ + if (idx < 8 && oc_pin <= 3) { + const int shift = PORT_TO_OC_SHIFT(idx, oc_pin); + if (shift_ok(shift)) { + printk(BIOS_DEBUG, "mapped to OC pin %u\n", oc_pin); + ehci_1_ocmap |= 1 << shift; + continue; + } + } + /* Ports 8 .. 13 => OC 4 .. 7 (LPT-H only) */ + if (!is_lp && idx >= 8 && oc_pin >= 4) { + const int shift = PORT_TO_OC_SHIFT(idx, oc_pin - 4); + if (shift_ok(shift)) { + printk(BIOS_DEBUG, "mapped to OC pin %u\n", oc_pin); + ehci_2_ocmap |= 1 << shift; + continue; + } + } + printk(BIOS_ERR, "Invalid OC pin %u for USB2 port %u\n", oc_pin, idx); + } + printk(BIOS_DEBUG, "\n"); + pci_write_config32(PCH_EHCI1_DEV, EHCI_OCMAP, ehci_1_ocmap); + if (!is_lp) + pci_write_config32(PCH_EHCI2_DEV, EHCI_OCMAP, ehci_2_ocmap); + + /* + * xHCI + */ + for (unsigned int idx = 0; idx < ss_port_count(); idx++) { + const struct usb3_port_config *const port = &mainboard_usb3_ports[idx]; + printk(BIOS_DEBUG, "USB3 port %u => ", idx); + if (!port->enable) { + printk(BIOS_DEBUG, "disabled\n"); + continue; + } + const unsigned short oc_pin = port->oc_pin; + if (oc_pin == USB_OC_PIN_SKIP) { + printk(BIOS_DEBUG, "not mapped to OC pin\n"); + continue; + } + /* Ports 0 .. 5 => OC 0 .. 3 */ + if (oc_pin <= 3) { + const int shift = PORT_TO_OC_SHIFT(idx, oc_pin); + if (shift_ok(shift)) { + printk(BIOS_DEBUG, "mapped to OC pin %u\n", oc_pin); + xhci_1_ocmap |= 1 << shift; + continue; + } + } + /* Ports 0 .. 5 => OC 4 .. 7 (LPT-H only) */ + if (!is_lp && oc_pin >= 4) { + const int shift = PORT_TO_OC_SHIFT(idx, oc_pin - 4); + if (shift_ok(shift)) { + printk(BIOS_DEBUG, "mapped to OC pin %u\n", oc_pin); + xhci_2_ocmap |= 1 << shift; + continue; + } + } + printk(BIOS_ERR, "Invalid OC pin %u for USB3 port %u\n", oc_pin, idx); + } + printk(BIOS_DEBUG, "\n"); + pci_write_config32(PCH_XHCI_DEV, XHCI_U2OCM1, ehci_1_ocmap); + pci_write_config32(PCH_XHCI_DEV, XHCI_U3OCM1, xhci_1_ocmap); + if (!is_lp) { + pci_write_config32(PCH_XHCI_DEV, XHCI_U2OCM2, ehci_2_ocmap); + pci_write_config32(PCH_XHCI_DEV, XHCI_U3OCM2, xhci_2_ocmap); + } +} + +static uint8_t get_ehci_tune_param_1(const struct usb2_port_config *const port) +{ + const bool is_lp = CONFIG(INTEL_LYNXPOINT_LP); + + const enum pch_platform_type plat_type = get_pch_platform_type(); + const enum usb2_port_location location = port->location; + const uint16_t length = port->length; + if (!is_lp) { + if (plat_type == PCH_TYPE_DESKTOP) { + if (location == USB_PORT_BACK_PANEL) + return 4; /* Back Panel */ + else + return 3; /* Front Panel */ + + } else if (plat_type == PCH_TYPE_MOBILE) { + if (location == USB_PORT_INTERNAL) + return 5; /* Internal Topology */ + else if (location == USB_PORT_DOCK) + return 4; /* Dock */ + else if (length < 0x70) + return 5; /* Back Panel, less than 7" */ + else + return 6; /* Back Panel, 7" or more */ + } + } else { + if (location == USB_PORT_BACK_PANEL || location == USB_PORT_MINI_PCIE) { + if (length < 0x70) + return 5; /* Back Panel, less than 7" */ + else + return 6; /* Back Panel, 7" or more */ + } else if (location == USB_PORT_DOCK) { + return 4; /* Dock */ + } else { + return 5; /* Internal Topology */ + } + } + printk(BIOS_ERR, "%s: Unhandled case\n", __func__); + return 0; +} + +static uint8_t get_ehci_tune_param_2(const struct usb2_port_config *const port) +{ + const bool is_lp = CONFIG(INTEL_LYNXPOINT_LP); + + const enum pch_platform_type plat_type = get_pch_platform_type(); + const enum usb2_port_location location = port->location; + const uint16_t length = port->length; + if (!is_lp) { + if (plat_type == PCH_TYPE_DESKTOP) { + if (location == USB_PORT_BACK_PANEL) { + if (length < 0x80) + return 2; /* Back Panel, less than 8" */ + else if (length < 0x130) + return 3; /* Back Panel, 8"-13" */ + else + return 4; /* Back Panel, 13" or more */ + } else { + return 2; /* Front Panel */ + } + + } else if (plat_type == PCH_TYPE_MOBILE) { + if (location == USB_PORT_INTERNAL) { + return 2; /* Internal Topology */ + } else if (location == USB_PORT_DOCK) { + if (length < 0x50) + return 1; /* Dock, less than 5" */ + else + return 2; /* Dock, 5" or more */ + } else { + if (length < 0x100) + return 2; /* Back Panel, less than 10" */ + else + return 3; /* Back Panel, 10" or more */ + } + } + } else { + if (location == USB_PORT_BACK_PANEL || location == USB_PORT_MINI_PCIE) { + if (length < 0x100) + return 2; /* Back Panel, less than 10" */ + else + return 3; /* Back Panel, 10" or more */ + } else if (location == USB_PORT_DOCK) { + if (length < 0x50) + return 1; /* Dock, less than 5" */ + else + return 2; /* Dock, 5" or more */ + } else { + return 2; /* Internal Topology */ + } + } + printk(BIOS_ERR, "%s: Unhandled case\n", __func__); + return 0; +} + +static void program_ehci_port_length(void) +{ + for (unsigned int port = 0; port < physical_port_count(); port++) { + if (!mainboard_usb2_ports[port].enable) + continue; + const uint32_t addr = 0xe5004000 + (port + 1) * 0x100; + const uint8_t param_1 = get_ehci_tune_param_1(&mainboard_usb2_ports[port]); + const uint8_t param_2 = get_ehci_tune_param_2(&mainboard_usb2_ports[port]); + pch_iobp_update(addr, ~0x7f00, param_2 << 11 | param_1 << 8); + } +} + +void early_usb_init(void) +{ + /** TODO: Make this configurable? How do the modes affect usbdebug? **/ + const enum usb_port_route usb_route = ROUTE_TO_XHCI; + ///(pd->boot_mode == 2 && pd->usb_xhci_on_resume) ? ROUTE_TO_XHCI : ROUTE_TO_EHCI; + + common_ehci_hcs_init(); + xhci_open_memory_space(); + common_xhci_hc_init(); + perform_xhci_ehci_switching_flow(usb_route); + usb_overcurrent_mapping(); + program_ehci_port_length(); + /** FIXME: USB per port control is missing, is it needed? **/ + xhci_close_memory_space(); + /** TODO: Close EHCI memory space? **/ +} diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index b5e0c2a830..ad983d86cf 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -115,6 +115,7 @@ enum pch_platform_type { void pch_dmi_setup_physical_layer(void); void pch_dmi_tc_vc_mapping(u32 vc0, u32 vc1, u32 vcp, u32 vcm); +void early_usb_init(void); void usb_ehci_sleep_prepare(pci_devfn_t dev, u8 slp_typ); void usb_ehci_disable(pci_devfn_t dev); @@ -202,6 +203,8 @@ void mainboard_config_rcba(void); #define GEN_PMCON_1 0xa0 #define SMI_LOCK (1 << 4) #define GEN_PMCON_2 0xa2 +#define GEN_PMCON_2_DISB (1 << 7) +#define GEN_PMCON_2_MEM_SR (1 << 5) #define SYSTEM_RESET_STS (1 << 4) #define THERMTRIP_STS (1 << 3) #define SYSPWR_FLR (1 << 1) @@ -215,6 +218,7 @@ void mainboard_config_rcba(void); #define PMIR 0xac #define PMIR_CF9LOCK (1 << 31) #define PMIR_CF9GR (1 << 20) +#define PMIR_XHCI_SMART_AUTO (1 << 16) /* c.f. LPT BWG or WPT-LP BIOS spec */ /* GEN_PMCON_3 bits */ #define RTC_BATTERY_DEAD (1 << 2) @@ -282,6 +286,20 @@ void mainboard_config_rcba(void); #define SATA_DTLE_DATA_SHIFT 24 #define SATA_DTLE_EDGE_SHIFT 16 +/* + * HCD_INDEX == 2 selects 0:1a.0 (PCH_EHCI2), any other index + * selects 0:1d.0 (PCH_EHCI1) for usbdebug use. + */ +#if CONFIG_USBDEBUG_HCD_INDEX != 2 +#define PCH_EHCI1_TEMP_BAR0 CONFIG_EHCI_BAR +#define PCH_EHCI2_TEMP_BAR0 (PCH_EHCI1_TEMP_BAR0 + 0x400) +#else +#define PCH_EHCI2_TEMP_BAR0 CONFIG_EHCI_BAR +#define PCH_EHCI1_TEMP_BAR0 (PCH_EHCI2_TEMP_BAR0 + 0x400) +#endif + +#define PCH_XHCI_TEMP_BAR0 0xe8100000 + /* EHCI PCI Registers */ #define EHCI_PWR_CTL_STS 0x54 #define PWR_CTL_SET_MASK 0x3 @@ -289,10 +307,15 @@ void mainboard_config_rcba(void); #define PWR_CTL_SET_D3 0x3 #define PWR_CTL_ENABLE_PME (1 << 8) #define PWR_CTL_STATUS_PME (1 << 15) +#define EHCI_OCMAP 0x74 +#define EHCI_ACCESS_CNTL 0x80 +#define ACCESS_CNTL_ENABLE (1 << 0) /* EHCI Memory Registers */ +#define EHCI_HCS_PARAMS 0x04 #define EHCI_USB_CMD 0x20 #define EHCI_USB_CMD_RUN (1 << 0) +#define EHCI_USB_CMD_HCRESET (1 << 1) #define EHCI_USB_CMD_PSE (1 << 4) #define EHCI_USB_CMD_ASE (1 << 5) #define EHCI_PORTSC(port) (0x64 + (port) * 4) @@ -301,6 +324,10 @@ void mainboard_config_rcba(void); /* XHCI PCI Registers */ #define XHCI_PWR_CTL_STS 0x74 +#define XHCI_U2OCM1 0xc0 +#define XHCI_U2OCM2 0xc4 +#define XHCI_U3OCM1 0xc8 +#define XHCI_U3OCM2 0xcc #define XHCI_USB2PR 0xd0 #define XHCI_USB2PRM 0xd4 #define XHCI_USB2PR_HCSEL 0x7fff @@ -313,6 +340,27 @@ void mainboard_config_rcba(void); #define XHCI_USB3PDO 0xe8 /* XHCI Memory Registers */ +#define XHCI_HCS_PARAMS_1 0x04 +#define XHCI_HCS_PARAMS_2 0x08 +#define XHCI_HCS_PARAMS_3 0x0c +#define XHCI_HCC_PARAMS 0x10 +#define XHCI_USBCMD 0x80 +#define XHCI_USB2_PORTSC(port) (0x480 + ((port) * 0x10)) +#define XHCI_USB2_PORTSC_WPR (1 << 31) /* Warm Port Reset */ +#define XHCI_USB2_PORTSC_CEC (1 << 23) /* Port Config Error Change */ +#define XHCI_USB2_PORTSC_PLC (1 << 22) /* Port Link State Change */ +#define XHCI_USB2_PORTSC_PRC (1 << 21) /* Port Reset Change */ +#define XHCI_USB2_PORTSC_OCC (1 << 20) /* Over-current Change */ +#define XHCI_USB2_PORTSC_WRC (1 << 19) /* Warm Port Reset Change */ +#define XHCI_USB2_PORTSC_PEC (1 << 18) /* Port Enabled Disabled Change */ +#define XHCI_USB2_PORTSC_CSC (1 << 17) /* Connect Status Change */ +#define XHCI_USB2_PORTSC_CHST (0x7f << 17) +#define XHCI_USB2_PORTSC_LWS (1 << 16) /* Port Link State Write Strobe */ +#define XHCI_USB2_PORTSC_PP (1 << 9) +#define XHCI_USB2_PORTSC_PR (1 << 4) /* Port Reset */ +#define XHCI_USB2_PORTSC_PED (1 << 1) /* Port Enable/Disabled */ +#define XHCI_USB2_PORTSC_CCS (1 << 0) /* Current Connect Status */ + #define XHCI_USB3_PORTSC(port) ((pch_is_lp() ? 0x510 : 0x570) + ((port) * 0x10)) #define XHCI_USB3_PORTSC_CHST (0x7f << 17) #define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */ @@ -320,6 +368,7 @@ void mainboard_config_rcba(void); #define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */ #define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */ #define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ +#define XHCI_USB3_PORTSC_PR (1 << 4) /* Port Reset */ #define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ #define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */ #define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */ -- 2.39.2