From 990ee284d48b66f06adb6c43a96439f7628390f5 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Sun, 8 May 2022 14:29:05 +0200 Subject: [PATCH 57/65] haswell NRI: Add final raminit steps Implement the remaining raminit steps. Although many training steps are missing, this is enough to boot on the Asrock B85M Pro4. Change-Id: I94f3b65f0218d4da4fda4d84592dfd91f77f8f21 Signed-off-by: Angel Pons --- src/northbridge/intel/haswell/Kconfig | 4 +- .../intel/haswell/native_raminit/Makefile.mk | 1 + .../haswell/native_raminit/activate_mc.c | 388 ++++++++++++++++++ .../haswell/native_raminit/raminit_main.c | 5 +- .../haswell/native_raminit/raminit_native.c | 5 +- .../haswell/native_raminit/raminit_native.h | 2 + .../haswell/native_raminit/reg_structs.h | 12 + .../intel/haswell/registers/mchbar.h | 7 + 8 files changed, 416 insertions(+), 8 deletions(-) create mode 100644 src/northbridge/intel/haswell/native_raminit/activate_mc.c diff --git a/src/northbridge/intel/haswell/Kconfig b/src/northbridge/intel/haswell/Kconfig index 4b83a25bc1..c6ab27184e 100644 --- a/src/northbridge/intel/haswell/Kconfig +++ b/src/northbridge/intel/haswell/Kconfig @@ -11,12 +11,12 @@ config NORTHBRIDGE_INTEL_HASWELL if NORTHBRIDGE_INTEL_HASWELL config USE_NATIVE_RAMINIT - bool "[NOT WORKING] Use native raminit" + bool "[NOT COMPLETE] Use native raminit" default n select HAVE_DEBUG_RAM_SETUP help Select if you want to use coreboot implementation of raminit rather than - MRC.bin. Currently incomplete and does not boot. + MRC.bin. Currently incomplete and does not support S3 resume. config HASWELL_VBOOT_IN_BOOTBLOCK depends on VBOOT diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk index 40c2f5e014..d97da72890 100644 --- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk +++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk @@ -1,5 +1,6 @@ ## SPDX-License-Identifier: GPL-2.0-or-later +romstage-y += activate_mc.c romstage-y += change_margin.c romstage-y += configure_mc.c romstage-y += ddr3.c diff --git a/src/northbridge/intel/haswell/native_raminit/activate_mc.c b/src/northbridge/intel/haswell/native_raminit/activate_mc.c new file mode 100644 index 0000000000..78a7ad27ef --- /dev/null +++ b/src/northbridge/intel/haswell/native_raminit/activate_mc.c @@ -0,0 +1,388 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include +#include +#include +#include +#include +#include + +#include "raminit_native.h" + +static void update_internal_clocks_on(struct sysinfo *ctrl) +{ + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + bool clocks_on = false; + for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { + const union ddr_data_control_1_reg data_control_1 = { + .raw = ctrl->dq_control_1[channel][byte], + }; + const int8_t o_on = data_control_1.odt_delay; + const int8_t s_on = data_control_1.sense_amp_delay; + const int8_t o_off = data_control_1.odt_duration; + const int8_t s_off = data_control_1.sense_amp_duration; + if (o_on + o_off >= 7 || s_on + s_off >= 7) { + clocks_on = true; + break; + } + } + union ddr_data_control_0_reg data_control_0 = { + .raw = ctrl->dq_control_0[channel], + }; + data_control_0.internal_clocks_on = clocks_on; + ctrl->dq_control_0[channel] = data_control_0.raw; + mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); + } +} + +/* Switch off unused segments of the SDLL to save power */ +static void update_sdll_length(struct sysinfo *ctrl) +{ + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { + uint8_t max_pi = 0; + for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { + if (!rank_in_ch(ctrl, rank, channel)) + continue; + + const uint8_t rx_dqs_p = ctrl->rxdqsp[channel][rank][byte]; + const uint8_t rx_dqs_n = ctrl->rxdqsn[channel][rank][byte]; + max_pi = MAX(max_pi, MAX(rx_dqs_p, rx_dqs_n)); + } + /* Update SDLL length for power savings */ + union ddr_data_control_1_reg data_control_1 = { + .raw = ctrl->dq_control_1[channel][byte], + }; + /* Calculate which segments to turn off */ + data_control_1.sdll_segment_disable = (7 - (max_pi >> 3)) & ~1; + ctrl->dq_control_1[channel][byte] = data_control_1.raw; + mchbar_write32(DQ_CONTROL_1(channel, byte), data_control_1.raw); + } + } +} + +static void set_rx_clk_stg_num(struct sysinfo *ctrl, const uint8_t channel) +{ + const uint8_t rcven_drift = ctrl->lpddr ? DIV_ROUND_UP(tDQSCK_DRIFT, ctrl->qclkps) : 1; + uint8_t max_rcven = 0; + for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { + if (!rank_in_ch(ctrl, rank, channel)) + continue; + + for (uint8_t byte = 0; byte < ctrl->lanes; byte++) + max_rcven = MAX(max_rcven, ctrl->rcven[channel][rank][byte] / 64); + } + const union ddr_data_control_1_reg ddr_data_control_1 = { + .raw = ctrl->dq_control_1[channel][0], + }; + const bool lpddr_long_odt = ddr_data_control_1.lpddr_long_odt_en; + const uint8_t rcven_turnoff = max_rcven + 18 + 2 * rcven_drift + lpddr_long_odt; + const union ddr_data_control_0_reg ddr_data_control_0 = { + .raw = ctrl->dq_control_0[channel], + }; + for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { + union ddr_data_control_2_reg ddr_data_control_2 = { + .raw = ctrl->dq_control_2[channel][byte], + }; + if (ddr_data_control_0.odt_samp_extend_en) { + if (ddr_data_control_2.rx_clk_stg_num < rcven_turnoff) + ddr_data_control_2.rx_clk_stg_num = rcven_turnoff; + } else { + const int8_t o_on = ddr_data_control_1.odt_delay; + const int8_t o_off = ddr_data_control_1.odt_duration; + ddr_data_control_2.rx_clk_stg_num = MAX(17, o_on + o_off + 14); + } + ctrl->dq_control_2[channel][byte] = ddr_data_control_2.raw; + mchbar_write32(DQ_CONTROL_2(channel, byte), ddr_data_control_2.raw); + } +} + +#define SELF_REFRESH_IDLE_COUNT 0x200 + +static void enter_sr(void) +{ + mchbar_write32(PM_SREF_CONFIG, SELF_REFRESH_IDLE_COUNT | BIT(16)); + udelay(1); +} + +enum power_down_mode { + PDM_NO_PD = 0, + PDM_APD = 1, + PDM_PPD = 2, + PDM_PPD_DLL_OFF = 6, +}; + +static void power_down_config(struct sysinfo *ctrl) +{ + const enum power_down_mode pd_mode = ctrl->lpddr ? PDM_PPD : PDM_PPD_DLL_OFF; + mchbar_write32(PM_PDWN_CONFIG, pd_mode << 12 | 0x40); +} + +static void train_power_modes_post(struct sysinfo *ctrl) +{ + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + /* Adjust tCPDED and tPRPDEN */ + if (ctrl->mem_clock_mhz >= 933) + ctrl->tc_bankrank_d[channel].tCPDED = 2; + + if (ctrl->mem_clock_mhz >= 1066) + ctrl->tc_bankrank_d[channel].tPRPDEN = 2; + + mchbar_write32(TC_BANK_RANK_D_ch(channel), ctrl->tc_bankrank_d[channel].raw); + } + power_down_config(ctrl); + mchbar_write32(MCDECS_CBIT, BIT(30)); /* dis_msg_clk_gate */ +} + +static uint8_t compute_burst_end_odt_delay(const struct sysinfo *const ctrl) +{ + /* Must be disabled for LPDDR */ + if (ctrl->lpddr) + return 0; + + const uint8_t beod = MIN(7, DIV_ROUND_CLOSEST(14300 * 20 / 100, ctrl->qclkps)); + if (beod < 3) + return 0; + + if (beod < 4) + return 4; + + return beod; +} + +static void program_burst_end_odt_delay(struct sysinfo *ctrl) +{ + /* Program burst_end_odt_delay - it should be zero during training steps */ + const uint8_t beod = compute_burst_end_odt_delay(ctrl); + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { + union ddr_data_control_1_reg ddr_data_control_1 = { + .raw = ctrl->dq_control_1[channel][byte], + }; + ddr_data_control_1.burst_end_odt_delay = beod; + ctrl->dq_control_1[channel][byte] = ddr_data_control_1.raw; + mchbar_write32(DQ_CONTROL_1(channel, byte), ddr_data_control_1.raw); + } + } +} + +/* + * Return a random value to use for scrambler seeds. Try to use RDRAND + * first and fall back to hardcoded values if RDRAND does not succeed. + */ +static uint16_t get_random_number(const uint8_t channel) +{ + /* The RDRAND instruction is only available 100k cycles after reset */ + for (size_t i = 0; i < 100000; i++) { + uint32_t status; + uint32_t random; + /** TODO: Clean up asm **/ + __asm__ __volatile__( + "\n\t .byte 0x0F, 0xC7, 0xF0" + "\n\t movl %%eax, %0" + "\n\t pushf" + "\n\t pop %%eax" + "\n\t movl %%eax, %1" + : "=m"(random), + "=m"(status) + : /* No inputs */ + : "eax", "cc"); + + /* Only consider non-zero random values as valid */ + if (status & 1 && random) + return random; + } + + /* https://xkcd.com/221 */ + if (channel) + return 0x28f4; + else + return 0x893e; +} + +/* Work around "error: 'typeof' applied to a bit-field" */ +static inline uint32_t max(const uint32_t a, const uint32_t b) +{ + return MAX(a, b); +} + +enum raminit_status activate_mc(struct sysinfo *ctrl) +{ + const bool enable_scrambling = true; + const bool enable_cmd_tristate = true; + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + if (enable_scrambling && ctrl->stepping < STEPPING_C0) { + /* Make sure tRDRD_(sr, dr, dd) are at least 6 for scrambler W/A */ + union tc_bank_rank_a_reg tc_bank_rank_a = { + .raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)), + }; + tc_bank_rank_a.tRDRD_sr = max(tc_bank_rank_a.tRDRD_sr, 6); + tc_bank_rank_a.tRDRD_dr = max(tc_bank_rank_a.tRDRD_dr, 6); + tc_bank_rank_a.tRDRD_dd = max(tc_bank_rank_a.tRDRD_dd, 6); + mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw); + } + if (enable_scrambling) { + const union ddr_scramble_reg ddr_scramble = { + .scram_key = get_random_number(channel), + .scram_en = 1, + }; + mchbar_write32(DDR_SCRAMBLE_ch(channel), ddr_scramble.raw); + } + if (ctrl->tCMD == 1) { + /* If we are in 1N mode, enable and set command rate limit to 3 */ + union mcmain_command_rate_limit_reg cmd_rate_limit = { + .raw = mchbar_read32(COMMAND_RATE_LIMIT_ch(channel)), + }; + cmd_rate_limit.enable_cmd_limit = 1; + cmd_rate_limit.cmd_rate_limit = 3; + mchbar_write32(COMMAND_RATE_LIMIT_ch(channel), cmd_rate_limit.raw); + } + if (enable_cmd_tristate) { + /* Enable command tri-state at the end of training */ + union tc_bank_rank_a_reg tc_bank_rank_a = { + .raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)), + }; + tc_bank_rank_a.cmd_3st_dis = 0; + mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw); + } + /* Set MC to normal mode and clean the ODT and CKE */ + mchbar_write32(REUT_ch_SEQ_CFG(channel), REUT_MODE_NOP << 12); + /* Set again the rank occupancy */ + mchbar_write8(MC_INIT_STATE_ch(channel), ctrl->rankmap[channel]); + if (ctrl->is_ecc) { + /* Enable ECC I/O and logic */ + union mad_dimm_reg mad_dimm = { + .raw = mchbar_read32(MAD_DIMM(channel)), + }; + mad_dimm.ecc_mode = 3; + mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); + } + } + + if (!is_hsw_ult()) + update_internal_clocks_on(ctrl); + + update_sdll_length(ctrl); + + program_burst_end_odt_delay(ctrl); + + if (is_hsw_ult()) { + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + set_rx_clk_stg_num(ctrl, channel); + } + /** TODO: Program DDRPL_CR_DDR_TX_DELAY if Memory Trace is enabled **/ + } + + /* Enable periodic COMP */ + mchbar_write32(M_COMP, (union pcu_comp_reg) { + .comp_interval = COMP_INT, + }.raw); + + /* Enable the power mode before PCU starts working */ + train_power_modes_post(ctrl); + + /* Set idle timer and self refresh enable bits */ + enter_sr(); + + /** FIXME: Do not hardcode power weights and RAPL settings **/ + mchbar_write32(0x5888, 0x00000d0d); + mchbar_write32(0x5884, 0x00000004); /* 58.2 pJ */ + + mchbar_write32(0x58e0, 0); + mchbar_write32(0x58e4, 0); + + mchbar_write32(0x5890, 0xffff); + mchbar_write32(0x5894, 0xffff); + mchbar_write32(0x5898, 0xffff); + mchbar_write32(0x589c, 0xffff); + mchbar_write32(0x58d0, 0xffff); + mchbar_write32(0x58d4, 0xffff); + mchbar_write32(0x58d8, 0xffff); + mchbar_write32(0x58dc, 0xffff); + + /* Overwrite thermal parameters */ + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + mchbar_write32(_MCMAIN_C(0x42ec, channel), 0x0000000f); + mchbar_write32(_MCMAIN_C(0x42f0, channel), 0x00000009); + mchbar_write32(_MCMAIN_C(0x42f4, channel), 0x00000093); + mchbar_write32(_MCMAIN_C(0x42f8, channel), 0x00000087); + mchbar_write32(_MCMAIN_C(0x42fc, channel), 0x000000de); + + /** TODO: Differs for LPDDR **/ + mchbar_write32(PM_THRT_CKE_MIN_ch(channel), 0x30); + } + mchbar_write32(PCU_DDR_PTM_CTL, 0x40); + return RAMINIT_STATUS_SUCCESS; +} + +static void mc_lockdown(void) +{ + /* Lock memory controller registers */ + mchbar_write32(MC_LOCK, 0x8f); + + /* MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK is set when programming the memory map */ + + /* Lock memory map registers */ + pci_or_config16(HOST_BRIDGE, GGC, 1 << 0); + pci_or_config32(HOST_BRIDGE, DPR, 1 << 0); + pci_or_config32(HOST_BRIDGE, MESEG_LIMIT, 1 << 10); + pci_or_config32(HOST_BRIDGE, REMAPBASE, 1 << 0); + pci_or_config32(HOST_BRIDGE, REMAPLIMIT, 1 << 0); + pci_or_config32(HOST_BRIDGE, TOM, 1 << 0); + pci_or_config32(HOST_BRIDGE, TOUUD, 1 << 0); + pci_or_config32(HOST_BRIDGE, BDSM, 1 << 0); + pci_or_config32(HOST_BRIDGE, BGSM, 1 << 0); + pci_or_config32(HOST_BRIDGE, TOLUD, 1 << 0); +} + +enum raminit_status raminit_done(struct sysinfo *ctrl) +{ + union mc_init_state_g_reg mc_init_state_g = { + .raw = mchbar_read32(MC_INIT_STATE_G), + }; + mc_init_state_g.refresh_enable = 1; + mc_init_state_g.pu_mrc_done = 1; + mc_init_state_g.mrc_done = 1; + mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); + + /* Lock the memory controller to enable normal operation */ + mc_lockdown(); + + /* Poll for mc_init_done_ack to make sure memory initialization is complete */ + printk(BIOS_DEBUG, "Waiting for mc_init_done acknowledgement... "); + + struct stopwatch timer; + stopwatch_init_msecs_expire(&timer, 2000); + do { + mc_init_state_g.raw = mchbar_read32(MC_INIT_STATE_G); + + /* DRAM will NOT work without the acknowledgement. There is no hope. */ + if (stopwatch_expired(&timer)) + die("\nTimed out waiting for mc_init_done acknowledgement\n"); + + } while (mc_init_state_g.mc_init_done_ack == 0); + printk(BIOS_DEBUG, "DONE!\n"); + + /* Provide some data for the graphics driver. Yes, it's hardcoded. */ + mchbar_write32(SSKPD + 0, 0x05a2404f); + mchbar_write32(SSKPD + 4, 0x140000a0); + return RAMINIT_STATUS_SUCCESS; +} diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c index 1ff23be615..3a65fb01fb 100644 --- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c +++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c @@ -63,6 +63,8 @@ static const struct task_entry cold_boot[] = { { train_receive_enable, true, "RCVET", }, { train_read_mpr, true, "RDMPRT", }, { train_jedec_write_leveling, true, "JWRL", }, + { activate_mc, true, "ACTIVATE", }, + { raminit_done, true, "RAMINITEND", }, }; /* Return a generic stepping value to make stepping checks simpler */ @@ -143,7 +145,4 @@ void raminit_main(const enum raminit_boot_mode bootmode) if (status != RAMINIT_STATUS_SUCCESS) die("Memory initialization was met with utmost failure and misery\n"); - - /** TODO: Implement the required magic **/ - die("NATIVE RAMINIT: More Magic (tm) required.\n"); } diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c index 2fed93de5b..5f7ceec222 100644 --- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c +++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c @@ -199,8 +199,6 @@ void perform_raminit(const int s3resume) else me_status = ME_INIT_STATUS_SUCCESS; - /** TODO: Remove this once raminit is implemented **/ - me_status = ME_INIT_STATUS_ERROR; intel_early_me_init_done(me_status); } @@ -214,7 +212,8 @@ void perform_raminit(const int s3resume) } /* Save training data on non-S3 resumes */ - if (!s3resume) + /** TODO: Enable this once training data is populated **/ + if (0 && !s3resume) save_mrc_data(&md); /** TODO: setup_sdram_meminfo **/ diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h index d6b11b9d3c..a0a913f926 100644 --- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h +++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h @@ -448,6 +448,8 @@ enum raminit_status do_jedec_init(struct sysinfo *ctrl); enum raminit_status train_receive_enable(struct sysinfo *ctrl); enum raminit_status train_read_mpr(struct sysinfo *ctrl); enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); +enum raminit_status activate_mc(struct sysinfo *ctrl); +enum raminit_status raminit_done(struct sysinfo *ctrl); void configure_timings(struct sysinfo *ctrl); void configure_refresh(struct sysinfo *ctrl); diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h index a0e36ed082..0d9aaa1f7c 100644 --- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h +++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h @@ -294,6 +294,18 @@ union ddr_cke_ctl_controls_reg { uint32_t raw; }; +union ddr_scramble_reg { + struct __packed { + uint32_t scram_en : 1; // Bits 0:0 + uint32_t scram_key : 16; // Bits 16:1 + uint32_t clk_gate_ab : 2; // Bits 18:17 + uint32_t clk_gate_c : 2; // Bits 20:19 + uint32_t en_dbi_ab : 1; // Bits 21:21 + uint32_t : 10; // Bits 31:17 + }; + uint32_t raw; +}; + union ddr_scram_misc_control_reg { struct __packed { uint32_t wl_wake_cycles : 2; // Bits 1:0 diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h index 7c0b5a49de..49a215aa71 100644 --- a/src/northbridge/intel/haswell/registers/mchbar.h +++ b/src/northbridge/intel/haswell/registers/mchbar.h @@ -20,6 +20,7 @@ #define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) +#define DQ_CONTROL_1(ch, byte) _DDRIO_C_R_B(0x0060, ch, 0, byte) #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) #define DDR_DATA_OFFSET_TRAIN_ch_b(ch, byte) _DDRIO_C_R_B(0x0070, ch, 0, byte) #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) @@ -147,6 +148,8 @@ #define QCLK_ch_LDAT_SDAT(ch) _MCMAIN_C(0x42d4, ch) #define QCLK_ch_LDAT_DATA_IN_x(ch, x) _MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */ +#define PM_THRT_CKE_MIN_ch(ch) _MCMAIN_C(0x4328, ch) + #define REUT_GLOBAL_CTL 0x4800 #define REUT_GLOBAL_ERR 0x4804 @@ -175,6 +178,8 @@ #define MCSCHEDS_DFT_MISC 0x4c30 +#define PM_PDWN_CONFIG 0x4cb0 + #define REUT_ERR_DATA_STATUS 0x4ce0 #define REUT_MISC_CKE_CTRL 0x4d90 @@ -186,8 +191,10 @@ #define MAD_CHNL 0x5000 /* Address Decoder Channel Configuration */ #define MAD_DIMM(ch) (0x5004 + (ch) * 4) #define MAD_ZR 0x5014 +#define MCDECS_CBIT 0x501c #define MC_INIT_STATE_G 0x5030 #define MRC_REVISION 0x5034 /* MRC Revision */ +#define PM_SREF_CONFIG 0x5060 #define RCOMP_TIMER 0x5084 -- 2.39.5