From db2b383a8ee5a4fc45c9ce0003ae45f25ed51f86 Mon Sep 17 00:00:00 2001 From: Angel Pons <th3fanbus@gmail.com> Date: Sat, 7 May 2022 21:49:40 +0200 Subject: [PATCH 35/51] haswell NRI: Add DDR3 JEDEC reset and init Implement JEDEC reset and init sequence for DDR3. The MRS commands are issued through the REUT (Robust Electrical Unified Testing) hardware. Change-Id: I2a0c066537021b587599228086727cb1e041bff5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> --- .../intel/haswell/native_raminit/Makefile.mk | 3 + .../intel/haswell/native_raminit/ddr3.c | 217 ++++++++++++++++++ .../haswell/native_raminit/io_comp_control.c | 19 ++ .../haswell/native_raminit/jedec_reset.c | 120 ++++++++++ .../haswell/native_raminit/raminit_main.c | 2 + .../haswell/native_raminit/raminit_native.h | 99 ++++++++ .../haswell/native_raminit/reg_structs.h | 154 +++++++++++++ .../intel/haswell/native_raminit/reut.c | 196 ++++++++++++++++ .../intel/haswell/registers/mchbar.h | 21 ++ src/southbridge/intel/lynxpoint/pch.h | 2 + 10 files changed, 833 insertions(+) create mode 100644 src/northbridge/intel/haswell/native_raminit/ddr3.c create mode 100644 src/northbridge/intel/haswell/native_raminit/jedec_reset.c create mode 100644 src/northbridge/intel/haswell/native_raminit/reut.c diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk index 37d527e972..e9212df9e6 100644 --- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk +++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk @@ -1,11 +1,14 @@ ## SPDX-License-Identifier: GPL-2.0-or-later romstage-y += configure_mc.c +romstage-y += ddr3.c +romstage-y += jedec_reset.c romstage-y += lookup_timings.c romstage-y += init_mpll.c romstage-y += io_comp_control.c romstage-y += memory_map.c romstage-y += raminit_main.c romstage-y += raminit_native.c +romstage-y += reut.c romstage-y += spd_bitmunching.c romstage-y += timings_refresh.c diff --git a/src/northbridge/intel/haswell/native_raminit/ddr3.c b/src/northbridge/intel/haswell/native_raminit/ddr3.c new file mode 100644 index 0000000000..6ddb11488b --- /dev/null +++ b/src/northbridge/intel/haswell/native_raminit/ddr3.c @@ -0,0 +1,217 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <assert.h> +#include <console/console.h> +#include <northbridge/intel/haswell/haswell.h> +#include <types.h> + +#include "raminit_native.h" + +#define DDR3_RTTNOM(a, b, c) (((a) << 9) | ((b) << 6) | ((c) << 2)) + +uint16_t encode_ddr3_rttnom(const uint32_t rttnom) +{ + switch (rttnom) { + case 0: return DDR3_RTTNOM(0, 0, 0); /* RttNom is disabled */ + case 20: return DDR3_RTTNOM(1, 0, 0); /* RZQ/12 */ + case 30: return DDR3_RTTNOM(1, 0, 1); /* RZQ/8 */ + case 40: return DDR3_RTTNOM(0, 1, 1); /* RZQ/6 */ + case 60: return DDR3_RTTNOM(0, 0, 1); /* RZQ/4 */ + case 120: return DDR3_RTTNOM(0, 1, 0); /* RZQ/2 */ + } + printk(BIOS_ERR, "%s: Invalid rtt_nom value %u\n", __func__, rttnom); + return 0; +} + +static const uint8_t jedec_wr_t[12] = { 1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0 }; + +static void ddr3_program_mr0(struct sysinfo *ctrl, const uint8_t dll_reset) +{ + assert(ctrl->tWR >= 5 && ctrl->tWR <= 16); + assert(ctrl->tAA >= 4); + const uint8_t jedec_cas = ctrl->tAA - 4; + const union { + struct __packed { + uint16_t burst_length : 2; // Bits 1:0 + uint16_t cas_latency_msb : 1; // Bits 2:2 + uint16_t read_burst_type : 1; // Bits 3:3 + uint16_t cas_latency_low : 3; // Bits 6:4 + uint16_t test_mode : 1; // Bits 7:7 + uint16_t dll_reset : 1; // Bits 8:8 + uint16_t write_recovery : 3; // Bits 11:9 + uint16_t precharge_pd_dll : 1; // Bits 12:12 + uint16_t : 3; // Bits 15:13 + }; + uint16_t raw; + } mr0reg = { + .burst_length = 0, + .cas_latency_msb = !!(jedec_cas & BIT(3)), + .read_burst_type = 0, + .cas_latency_low = jedec_cas & 0x7, + .dll_reset = 1, + .write_recovery = jedec_wr_t[ctrl->tWR - 5], + .precharge_pd_dll = 0, + }; + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { + if (!rank_in_ch(ctrl, slot + slot, channel)) + continue; + + if (!ctrl->restore_mrs) + ctrl->mr0[channel][slot] = mr0reg.raw; + } + reut_issue_mrs_all(ctrl, channel, 0, ctrl->mr0[channel]); + } +} + +void ddr3_program_mr1(struct sysinfo *ctrl, const uint8_t wl_mode, const uint8_t q_off) +{ + /* + * JESD79-3F (JEDEC DDR3 spec) refers to bit 0 of MR1 as 'DLL Enable'. + * However, its encoding is weird, and 'DLL Disable' makes more sense. + * + * Moreover, bit 5 is part of ODIC (Output Driver Impedance Control), + * but all encodings where MR1 bit 5 is 1 are reserved. Thus, omit it. + */ + union { + struct __packed { + uint16_t dll_disable : 1; // Bits 0:0 + uint16_t od_impedance_ctl : 1; // Bits 1:1 + uint16_t odt_rtt_nom_low : 1; // Bits 2:2 + uint16_t additive_latency : 2; // Bits 4:3 + uint16_t : 1; // Bits 5:5 + uint16_t odt_rtt_nom_mid : 1; // Bits 6:6 + uint16_t write_level_mode : 1; // Bits 7:7 + uint16_t : 1; // Bits 8:8 + uint16_t odt_rtt_nom_high : 1; // Bits 9:9 + uint16_t : 1; // Bits 10:10 + uint16_t t_dqs : 1; // Bits 11:11 + uint16_t q_off : 1; // Bits 12:12 + uint16_t : 3; // Bits 15:13 + }; + uint16_t raw; + } mr1reg = { + .dll_disable = 0, + .od_impedance_ctl = 1, /* RZQ/7 */ + .additive_latency = 0, + .write_level_mode = wl_mode, + .t_dqs = 0, + .q_off = q_off, + }; + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + mr1reg.raw &= ~RTTNOM_MASK; + mr1reg.raw |= encode_ddr3_rttnom(ctrl->dpc[channel] == 2 ? 60 : 0); + for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { + if (!rank_in_ch(ctrl, slot + slot, channel)) + continue; + + if (!ctrl->restore_mrs) + ctrl->mr1[channel][slot] = mr1reg.raw; + } + reut_issue_mrs_all(ctrl, channel, 1, ctrl->mr1[channel]); + } +} + +enum { + RTT_WR_OFF = 0, + RTT_WR_60 = 1, + RTT_WR_120 = 2, +}; + +static void ddr3_program_mr2(struct sysinfo *ctrl) +{ + assert(ctrl->tCWL >= 5); + const bool dimm_srt = ctrl->flags.ext_temp_refresh && !ctrl->flags.asr; + + const union { + struct __packed { + uint16_t partial_array_sr : 3; // Bits 0:2 + uint16_t cas_write_latency : 3; // Bits 5:3 + uint16_t auto_self_refresh : 1; // Bits 6:6 + uint16_t self_refresh_temp : 1; // Bits 7:7 + uint16_t : 1; // Bits 8:8 + uint16_t odt_rtt_wr : 2; // Bits 10:9 + uint16_t : 5; // Bits 15:11 + }; + uint16_t raw; + } mr2reg = { + .partial_array_sr = 0, + .cas_write_latency = ctrl->tCWL - 5, + .auto_self_refresh = ctrl->flags.asr, + .self_refresh_temp = dimm_srt, + .odt_rtt_wr = is_hsw_ult() ? RTT_WR_120 : RTT_WR_60, + }; + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { + if (!rank_in_ch(ctrl, slot + slot, channel)) + continue; + + if (!ctrl->restore_mrs) + ctrl->mr2[channel][slot] = mr2reg.raw; + } + /* MR2 shadow register is similar but not identical to MR2 */ + if (!ctrl->restore_mrs) { + union tc_mr2_shadow_reg tc_mr2_shadow = { + .raw = mr2reg.raw & 0x073f, + }; + for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { + if (!rank_in_ch(ctrl, slot + slot, channel)) + continue; + + if (dimm_srt) + tc_mr2_shadow.srt_available |= BIT(slot); + + if (ctrl->rank_mirrored[channel] & BIT(slot + slot + 1)) + tc_mr2_shadow.addr_bit_swizzle |= BIT(slot); + } + mchbar_write32(TC_MR2_SHADOW_ch(channel), tc_mr2_shadow.raw); + } + reut_issue_mrs_all(ctrl, channel, 2, ctrl->mr2[channel]); + } +} + +static void ddr3_program_mr3(struct sysinfo *ctrl, const uint8_t mpr_mode) +{ + const union { + struct __packed { + uint16_t mpr_loc : 2; // Bits 1:0 + uint16_t mpr_mode : 1; // Bits 2:2 + uint16_t : 13; // Bits 15:3 + }; + uint16_t raw; + } mr3reg = { + .mpr_loc = 0, + .mpr_mode = mpr_mode, + }; + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!does_ch_exist(ctrl, channel)) + continue; + + for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { + if (!rank_in_ch(ctrl, slot + slot, channel)) + continue; + + if (!ctrl->restore_mrs) + ctrl->mr3[channel][slot] = mr3reg.raw; + } + reut_issue_mrs_all(ctrl, channel, 3, ctrl->mr3[channel]); + } +} + +enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl) +{ + ddr3_program_mr2(ctrl); + ddr3_program_mr3(ctrl, 0); + ddr3_program_mr1(ctrl, 0, 0); + ddr3_program_mr0(ctrl, 1); + return reut_issue_zq(ctrl, ctrl->chanmap, ZQ_INIT); +} diff --git a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c index d45b608dd3..8a55fd81b2 100644 --- a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c +++ b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c @@ -8,6 +8,25 @@ #include "raminit_native.h" +enum raminit_status io_reset(void) +{ + union mc_init_state_g_reg mc_init_state_g = { + .raw = mchbar_read32(MC_INIT_STATE_G), + }; + mc_init_state_g.reset_io = 1; + mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); + struct stopwatch timer; + stopwatch_init_msecs_expire(&timer, 2000); + do { + mc_init_state_g.raw = mchbar_read32(MC_INIT_STATE_G); + if (mc_init_state_g.reset_io == 0) + return RAMINIT_STATUS_SUCCESS; + + } while (!stopwatch_expired(&timer)); + printk(BIOS_ERR, "Timed out waiting for DDR I/O reset to complete\n"); + return RAMINIT_STATUS_POLL_TIMEOUT; +} + enum raminit_status wait_for_first_rcomp(void) { struct stopwatch timer; diff --git a/src/northbridge/intel/haswell/native_raminit/jedec_reset.c b/src/northbridge/intel/haswell/native_raminit/jedec_reset.c new file mode 100644 index 0000000000..de0f676758 --- /dev/null +++ b/src/northbridge/intel/haswell/native_raminit/jedec_reset.c @@ -0,0 +1,120 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <console/console.h> +#include <delay.h> +#include <northbridge/intel/haswell/haswell.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <types.h> +#include <timer.h> + +#include "raminit_native.h" + +static void assert_reset(const bool do_reset) +{ + if (is_hsw_ult()) { + uint32_t pm_cfg2 = RCBA32(PM_CFG2); + if (do_reset) + pm_cfg2 &= ~PM_CFG2_DRAM_RESET_CTL; + else + pm_cfg2 |= PM_CFG2_DRAM_RESET_CTL; + RCBA32(PM_CFG2) = pm_cfg2; + } else { + union mc_init_state_g_reg mc_init_state_g = { + .raw = mchbar_read32(MC_INIT_STATE_G), + }; + mc_init_state_g.ddr_not_reset = !do_reset; + mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); + } +} + +/* + * Perform JEDEC reset. + * + * If RTT_NOM is to be enabled in MR1, the ODT input signal must be + * statically held low in our system since RTT_NOM is always enabled. + */ +static void jedec_reset(struct sysinfo *ctrl) +{ + if (is_hsw_ult()) + assert_reset(false); + + union mc_init_state_g_reg mc_init_state_g = { + .ddr_not_reset = 1, + .safe_self_refresh = 1, + }; + mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); + + union reut_misc_cke_ctrl_reg reut_misc_cke_ctrl = { + .cke_override = 0xf, + .cke_on = 0, + }; + mchbar_write32(REUT_MISC_CKE_CTRL, reut_misc_cke_ctrl.raw); + + assert_reset(true); + + /** TODO: check and switch DDR3 voltage here (mainboard-specific) **/ + + udelay(200); + + assert_reset(false); + + udelay(500); + + mc_init_state_g.dclk_enable = 1; + mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); + + /* Delay at least 20 nanoseconds for tCKSRX */ + tick_delay(1); + + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + reut_misc_cke_ctrl.cke_on = ctrl->rankmap[channel]; + mchbar_write32(REUT_ch_MISC_CKE_CTRL(channel), reut_misc_cke_ctrl.raw); + } + + /* + * Wait minimum of reset CKE exit time, tXPR. + * Spec says MAX(tXS, 5 tCK). 5 tCK is 10 ns. + */ + tick_delay(1); +} + +enum raminit_status do_jedec_init(struct sysinfo *ctrl) +{ + /* Never do a JEDEC reset in S3 resume */ + if (ctrl->bootmode == BOOTMODE_S3) + return RAMINIT_STATUS_SUCCESS; + + enum raminit_status status = io_reset(); + if (status) + return status; + + status = wait_for_first_rcomp(); + if (status) + return status; + + /* Force ODT low (JEDEC spec) */ + const union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { + .odt_override = 0xf, + .odt_on = 0, + }; + mchbar_write32(REUT_MISC_ODT_CTRL, reut_misc_odt_ctrl.raw); + + /* + * Note: Haswell MRC does not clear ODT override for LPDDR3. However, + * Broadwell MRC does. Hell suspects this difference is important, as + * there is an erratum in the specification update for Broadwell: + * + * Erratum BDM74: LPDDR3 Memory Training May Cause Platform Boot Failure + */ + if (ctrl->lpddr) + die("%s: LPDDR-specific JEDEC init not implemented\n", __func__); + + jedec_reset(ctrl); + status = ddr3_jedec_init(ctrl); + if (!status) + ctrl->restore_mrs = true; + + /* Release ODT override */ + mchbar_write32(REUT_MISC_ODT_CTRL, 0); + return status; +} diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c index 559dfc3a4e..94b268468c 100644 --- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c +++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c @@ -24,6 +24,7 @@ static const struct task_entry cold_boot[] = { { convert_timings, true, "CONVTIM", }, { configure_mc, true, "CONFMC", }, { configure_memory_map, true, "MEMMAP", }, + { do_jedec_init, true, "JEDECINIT", }, }; /* Return a generic stepping value to make stepping checks simpler */ @@ -57,6 +58,7 @@ static void initialize_ctrl(struct sysinfo *ctrl) ctrl->stepping = get_stepping(ctrl->cpu); ctrl->vdd_mv = is_hsw_ult() ? 1350 : 1500; /** FIXME: Hardcoded, does it matter? **/ ctrl->dq_pins_interleaved = cfg->dq_pins_interleaved; + ctrl->restore_mrs = false; ctrl->bootmode = bootmode; } diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h index 8f937c4ccd..759d755d6d 100644 --- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h +++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h @@ -28,6 +28,30 @@ /* Always use 12 legs for emphasis (not trained) */ #define TXEQFULLDRV (3 << 4) +/* DDR3 mode register bits */ +#define MR0_DLL_RESET BIT(8) + +#define MR1_WL_ENABLE BIT(7) +#define MR1_QOFF_ENABLE BIT(12) /* If set, output buffers disabled */ + +#define RTTNOM_MASK (BIT(9) | BIT(6) | BIT(2)) + +/* ZQ calibration types */ +enum { + ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ + ZQ_LONG, /* DDR3: ZQCL with tZQoper, LPDDR3: ZQ Long with tZQCL */ + ZQ_SHORT, /* DDR3: ZQCS with tZQCS, LPDDR3: ZQ Short with tZQCS */ + ZQ_RESET, /* DDR3: not used, LPDDR3: ZQ Reset with tZQreset */ +}; + +/* REUT initialisation modes */ +enum { + REUT_MODE_IDLE = 0, + REUT_MODE_TEST = 1, + REUT_MODE_MRS = 2, + REUT_MODE_NOP = 3, /* Normal operation mode */ +}; + enum command_training_iteration { CT_ITERATION_CLOCK = 0, CT_ITERATION_CMD_NORTH, @@ -51,6 +75,7 @@ enum raminit_status { RAMINIT_STATUS_UNSUPPORTED_MEMORY, RAMINIT_STATUS_MPLL_INIT_FAILURE, RAMINIT_STATUS_POLL_TIMEOUT, + RAMINIT_STATUS_REUT_ERROR, RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ }; @@ -73,6 +98,7 @@ struct sysinfo { uint32_t cpu; /* CPUID value */ bool dq_pins_interleaved; + bool restore_mrs; /** TODO: ECC support untested **/ bool is_ecc; @@ -162,6 +188,11 @@ struct sysinfo { union tc_bank_rank_b_reg tc_bankrank_b[NUM_CHANNELS]; union tc_bank_rank_c_reg tc_bankrank_c[NUM_CHANNELS]; union tc_bank_rank_d_reg tc_bankrank_d[NUM_CHANNELS]; + + uint16_t mr0[NUM_CHANNELS][NUM_SLOTS]; + uint16_t mr1[NUM_CHANNELS][NUM_SLOTS]; + uint16_t mr2[NUM_CHANNELS][NUM_SLOTS]; + uint16_t mr3[NUM_CHANNELS][NUM_SLOTS]; }; static inline bool is_hsw_ult(void) @@ -197,6 +228,53 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl) memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); } +/* Number of ticks to wait in units of 69.841279 ns (citation needed) */ +static inline void tick_delay(const uint32_t delay) +{ + /* Just perform reads to a random register */ + for (uint32_t start = 0; start <= delay; start++) + mchbar_read32(REUT_ERR_DATA_STATUS); +} + +/* + * 64-bit MCHBAR registers need to be accessed atomically. If one uses + * two 32-bit ops instead, there will be problems with the REUT's CADB + * (Command Address Data Buffer): hardware automatically advances the + * pointer into the register file after a write to the input register. + */ +static inline uint64_t mchbar_read64(const uintptr_t x) +{ + const uint64_t *offset = (uint64_t *)(CONFIG_FIXED_MCHBAR_MMIO_BASE + x); + uint64_t mmxsave, v; + asm volatile ( + "\n\t movq %%mm0, %0" + "\n\t movq %2, %%mm0" + "\n\t movq %%mm0, %1" + "\n\t movq %3, %%mm0" + "\n\t emms" + : "=m"(mmxsave), + "=m"(v) + : "m"(offset[0]), + "m"(mmxsave)); + return v; +} + +static inline void mchbar_write64(const uintptr_t x, const uint64_t v) +{ + const uint64_t *offset = (uint64_t *)(CONFIG_FIXED_MCHBAR_MMIO_BASE + x); + uint64_t mmxsave; + asm volatile ( + "\n\t movq %%mm0, %0" + "\n\t movq %2, %%mm0" + "\n\t movq %%mm0, %1" + "\n\t movq %3, %%mm0" + "\n\t emms" + : "=m"(mmxsave) + : "m"(offset[0]), + "m"(v), + "m"(mmxsave)); +} + void raminit_main(enum raminit_boot_mode bootmode); enum raminit_status collect_spd_info(struct sysinfo *ctrl); @@ -204,6 +282,7 @@ enum raminit_status initialise_mpll(struct sysinfo *ctrl); enum raminit_status convert_timings(struct sysinfo *ctrl); enum raminit_status configure_mc(struct sysinfo *ctrl); enum raminit_status configure_memory_map(struct sysinfo *ctrl); +enum raminit_status do_jedec_init(struct sysinfo *ctrl); void configure_timings(struct sysinfo *ctrl); void configure_refresh(struct sysinfo *ctrl); @@ -216,8 +295,28 @@ uint32_t get_tXS_offset(uint32_t mem_clock_mhz); uint32_t get_tZQOPER(uint32_t mem_clock_mhz, bool lpddr); uint32_t get_tZQCS(uint32_t mem_clock_mhz, bool lpddr); +enum raminit_status io_reset(void); enum raminit_status wait_for_first_rcomp(void); +uint16_t encode_ddr3_rttnom(uint32_t rttnom); +void ddr3_program_mr1(struct sysinfo *ctrl, uint8_t wl_mode, uint8_t q_off); +enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl); + +void reut_issue_mrs( + struct sysinfo *ctrl, + uint8_t channel, + uint8_t rankmask, + uint8_t mr, + uint16_t val); + +void reut_issue_mrs_all( + struct sysinfo *ctrl, + uint8_t channel, + uint8_t mr, + const uint16_t val[NUM_SLOTS]); + +enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type); + uint8_t get_rx_bias(const struct sysinfo *ctrl); uint8_t get_tCWL(uint32_t mem_clock_mhz); diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h index 70487e1640..9929f617fe 100644 --- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h +++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h @@ -335,6 +335,127 @@ union mcscheds_cbit_reg { uint32_t raw; }; +union reut_pat_cadb_prog_reg { + struct __packed { + uint32_t addr : 16; // Bits 15:0 + uint32_t : 8; // Bits 23:16 + uint32_t bank : 3; // Bits 26:24 + uint32_t : 5; // Bits 31:27 + uint32_t cs : 4; // Bits 35:32 + uint32_t : 4; // Bits 39:36 + uint32_t cmd : 3; // Bits 42:40 + uint32_t : 5; // Bits 47:43 + uint32_t odt : 4; // Bits 51:48 + uint32_t : 4; // Bits 55:52 + uint32_t cke : 4; // Bits 59:56 + uint32_t : 4; // Bits 63:60 + }; + uint64_t raw; + uint32_t raw32[2]; +}; + +union reut_pat_cadb_mrs_reg { + struct __packed { + uint32_t delay_gap : 3; // Bits 2:0 + uint32_t : 5; // Bits 7:3 + uint32_t start_ptr : 3; // Bits 10:8 + uint32_t : 5; // Bits 15:11 + uint32_t end_ptr : 3; // Bits 18:16 + uint32_t : 5; // Bits 23:19 + uint32_t curr_ptr : 3; // Bits 26:24 + uint32_t : 5; // Bits 31:27 + }; + uint32_t raw; +}; + +union reut_seq_cfg_reg { + struct __packed { + uint32_t : 3; // Bits 2:0 + uint32_t stop_base_seq_on_wrap_trigger : 1; // Bits 3:3 + uint32_t : 1; // Bits 4:4 + uint32_t address_update_rate_mode : 1; // Bits 5:5 + uint32_t : 1; // Bits 6:6 + uint32_t enable_dummy_reads : 1; // Bits 7:7 + uint32_t : 2; // Bits 9:8 + uint32_t enable_constant_write_strobe : 1; // Bits 10:10 + uint32_t global_control : 1; // Bits 11:11 + uint32_t initialization_mode : 2; // Bits 13:12 + uint32_t : 2; // Bits 15:14 + uint32_t early_steppings_loop_count : 5; // Bits 20:16 *** Not on C0 *** + uint32_t : 3; // Bits 23:21 + uint32_t subsequence_start_pointer : 3; // Bits 26:24 + uint32_t : 1; // Bits 27:27 + uint32_t subsequence_end_pointer : 3; // Bits 30:28 + uint32_t : 1; // Bits 31:31 + uint32_t start_test_delay : 10; // Bits 41:32 + uint32_t : 22; // Bits 63:42 + }; + uint64_t raw; + uint32_t raw32[2]; +}; + +union reut_seq_ctl_reg { + struct __packed { + uint32_t start_test : 1; // Bits 0:0 + uint32_t stop_test : 1; // Bits 1:1 + uint32_t clear_errors : 1; // Bits 2:2 + uint32_t : 1; // Bits 3:3 + uint32_t stop_on_error : 1; // Bits 4:4 + uint32_t : 27; // Bits 31:5 + }; + uint32_t raw; +}; + +union reut_global_err_reg { + struct __packed { + uint32_t ch_error : 2; // Bits 1:0 + uint32_t : 14; // Bits 15:2 + uint32_t ch_test_done : 2; // Bits 17:16 + uint32_t : 14; // Bits 31:18 + }; + uint32_t raw; +}; + +union reut_misc_cke_ctrl_reg { + struct __packed { + uint32_t cke_override : 4; // Bits 3:0 + uint32_t : 4; // Bits 7:4 + uint32_t cke_en_start_test_sync : 1; // Bits 8:8 + uint32_t : 7; // Bits 15:9 + uint32_t cke_on : 4; // Bits 19:16 + uint32_t : 12; // Bits 31:20 + }; + uint32_t raw; +}; + +union reut_misc_odt_ctrl_reg { + struct __packed { + uint32_t odt_override : 4; // Bits 3:0 + uint32_t : 12; // Bits 15:4 + uint32_t odt_on : 4; // Bits 19:16 + uint32_t : 11; // Bits 30:20 + uint32_t mpr_train_ddr_on : 1; // Bits 31:31 + }; + uint32_t raw; +}; + +union mcscheds_dft_misc_reg { + struct __packed { + uint32_t wdar : 1; // Bits 0:0 + uint32_t safe_mask_sel : 3; // Bits 3:1 + uint32_t force_rcv_en : 1; // Bits 4:4 + uint32_t : 3; // Bits 7:5 + uint32_t ddr_qualifier : 2; // Bits 9:8 + uint32_t qualifier_length : 2; // Bits 11:10 + uint32_t wdb_block_en : 1; // Bits 12:12 + uint32_t rt_dft_read_ptr : 4; // Bits 16:13 + uint32_t rt_dft_read_enable : 1; // Bits 17:17 + uint32_t rt_dft_read_sel_addr : 1; // Bits 18:18 + uint32_t : 13; // Bits 31:19 + }; + uint32_t raw; +}; + union tc_bank_reg { struct __packed { uint32_t tRCD : 5; // Bits 4:0 @@ -428,6 +549,18 @@ union tc_srftp_reg { uint32_t raw; }; +union tc_mr2_shadow_reg { + struct __packed { + uint32_t mr2_shadow_low : 6; // Bits 5:0 + uint32_t srt_available : 2; // Bits 7:6 + uint32_t mr2_shadow_high : 3; // Bits 10:8 + uint32_t : 3; // Bits 13:11 + uint32_t addr_bit_swizzle : 2; // Bits 15:14 + uint32_t : 16; // Bits 31:16 + }; + uint32_t raw; +}; + union mcmain_command_rate_limit_reg { struct __packed { uint32_t enable_cmd_limit : 1; // Bits 0:0 @@ -483,6 +616,27 @@ union mad_zr_reg { uint32_t raw; }; +union mc_init_state_g_reg { + struct __packed { + uint32_t pu_mrc_done : 1; // Bits 0:0 + uint32_t ddr_not_reset : 1; // Bits 1:1 + uint32_t : 1; // Bits 2:2 + uint32_t refresh_enable : 1; // Bits 3:3 + uint32_t : 1; // Bits 4:4 + uint32_t mc_init_done_ack : 1; // Bits 5:5 + uint32_t : 1; // Bits 6:6 + uint32_t mrc_done : 1; // Bits 7:7 + uint32_t safe_self_refresh : 1; // Bits 8:8 + uint32_t : 1; // Bits 9:9 + uint32_t hvm_gate_ddr_reset : 1; // Bits 10:10 + uint32_t : 11; // Bits 21:11 + uint32_t dclk_enable : 1; // Bits 22:22 + uint32_t reset_io : 1; // Bits 23:23 + uint32_t : 8; // Bits 31:24 + }; + uint32_t raw; +}; + /* Same definition for P_COMP, M_COMP, D_COMP */ union pcu_comp_reg { struct __packed { diff --git a/src/northbridge/intel/haswell/native_raminit/reut.c b/src/northbridge/intel/haswell/native_raminit/reut.c new file mode 100644 index 0000000000..31019f74a1 --- /dev/null +++ b/src/northbridge/intel/haswell/native_raminit/reut.c @@ -0,0 +1,196 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <console/console.h> +#include <delay.h> +#include <northbridge/intel/haswell/haswell.h> +#include <timer.h> +#include <types.h> + +#include "raminit_native.h" + +enum { + CADB_CMD_MRS = 0, + CADB_CMD_REF = 1, + CADB_CMD_PRE = 2, + CADB_CMD_ACT = 3, + CADB_CMD_WR = 4, + CADB_CMD_RD = 5, + CADB_CMD_ZQ = 6, + CADB_CMD_NOP = 7, +}; + +/* + * DDR3 rank mirror swaps the following pins: A3<->A4, A5<->A6, A7<->A8, BA0<->BA1 + * + * Note that the swapped bits are contiguous. We can use some XOR magic to swap the bits. + * Address lanes are at bits 0..15 and bank selects are at bits 24..26 on the REUT register. + */ +#define MIRROR_BITS (BIT(24) | BIT(7) | BIT(5) | BIT(3)) +static uint64_t cadb_prog_rank_mirror(const uint64_t cadb_prog) +{ + /* First XOR: find which pairs of bits are different (need swapping) */ + const uint64_t tmp64 = (cadb_prog ^ (cadb_prog >> 1)) & MIRROR_BITS; + + /* Second XOR: invert the pairs of bits that have different values */ + return cadb_prog ^ (tmp64 | tmp64 << 1); +} + +static enum raminit_status reut_write_cadb_cmd( + struct sysinfo *ctrl, + const uint8_t channel, + const uint8_t rankmask, + const uint8_t cmd, + const uint8_t bank, + const uint16_t valarr[NUM_SLOTRANKS], + const uint8_t delay) +{ + union mcscheds_dft_misc_reg dft_misc = { + .raw = mchbar_read32(MCSCHEDS_DFT_MISC), + }; + dft_misc.ddr_qualifier = 0; + mchbar_write32(MCSCHEDS_DFT_MISC, dft_misc.raw); + + /* Pointer will be dynamically incremented after a write to CADB_PROG register */ + mchbar_write8(REUT_ch_PAT_CADB_WRITE_PTR(channel), 0); + + uint8_t count = 0; + for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { + if (!(ctrl->rankmap[channel] & BIT(rank) & rankmask)) + continue; + + union reut_pat_cadb_prog_reg reut_cadb_prog = { + .addr = valarr[rank], + .bank = bank, + .cs = ~BIT(rank), /* CS is active low */ + .cmd = cmd, + .cke = 0xf, + }; + if (ctrl->rank_mirrored[channel] & BIT(rank)) + reut_cadb_prog.raw = cadb_prog_rank_mirror(reut_cadb_prog.raw); + + mchbar_write64(REUT_ch_PAT_CADB_PROG(channel), reut_cadb_prog.raw); + count++; + } + if (!count) { + printk(BIOS_ERR, "%s: rankmask is invalid\n", __func__); + return RAMINIT_STATUS_UNSPECIFIED_ERROR; /** FIXME: Is this needed? **/ + } + const union reut_pat_cadb_mrs_reg reut_cadb_mrs = { + .delay_gap = delay ? delay : 3, + .end_ptr = count - 1, + }; + mchbar_write32(REUT_ch_PAT_CADB_MRS(channel), reut_cadb_mrs.raw); + + const uint32_t reut_seq_cfg_save = mchbar_read32(REUT_ch_SEQ_CFG(channel)); + union reut_seq_cfg_reg reut_seq_cfg = { + .raw = reut_seq_cfg_save, + }; + reut_seq_cfg.global_control = 0; + reut_seq_cfg.initialization_mode = REUT_MODE_MRS; + mchbar_write32(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); + mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { + .start_test = 1, + .clear_errors = 1, + }.raw); + enum raminit_status status = RAMINIT_STATUS_SUCCESS; + union reut_global_err_reg reut_global_err; + struct stopwatch timer; + stopwatch_init_msecs_expire(&timer, 100); + do { + reut_global_err.raw = mchbar_read32(REUT_GLOBAL_ERR); + if (reut_global_err.ch_error & BIT(channel)) { + printk(BIOS_ERR, "Unexpected REUT error for channel %u\n", channel); + status = RAMINIT_STATUS_REUT_ERROR; + break; + } + if (stopwatch_expired(&timer)) { + printk(BIOS_ERR, "%s: REUT timed out!\n", __func__); + status = RAMINIT_STATUS_POLL_TIMEOUT; + break; + } + } while (!(reut_global_err.ch_test_done & BIT(channel))); + mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { + .clear_errors = 1, + }.raw); + mchbar_write32(REUT_ch_SEQ_CFG(channel), reut_seq_cfg_save); + return status; +} + +static enum raminit_status reut_write_cadb_cmd_all( + struct sysinfo *ctrl, + const uint8_t channel, + const uint8_t rankmask, + const uint8_t cmd, + const uint8_t bank, + const uint16_t val, + const uint8_t delay) +{ + const uint16_t valarr[NUM_SLOTRANKS] = { val, val, val, val }; + return reut_write_cadb_cmd(ctrl, channel, rankmask, cmd, bank, valarr, delay); +} + +void reut_issue_mrs( + struct sysinfo *ctrl, + const uint8_t channel, + const uint8_t rankmask, + const uint8_t mr, + const uint16_t val) +{ + reut_write_cadb_cmd_all(ctrl, channel, rankmask, CADB_CMD_MRS, mr, val, 0); +} + +void reut_issue_mrs_all( + struct sysinfo *ctrl, + const uint8_t channel, + const uint8_t mr, + const uint16_t val[NUM_SLOTS]) +{ + const uint16_t valarr[NUM_SLOTRANKS] = { val[0], val[0], val[1], val[1] }; + reut_write_cadb_cmd(ctrl, channel, 0xf, CADB_CMD_MRS, mr, valarr, 0); +} + +enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type) +{ + /** TODO: Issuing ZQ commands differs for LPDDR **/ + if (ctrl->lpddr) + die("%s: LPDDR not yet supported in ZQ calibration\n", __func__); + + __maybe_unused uint8_t opcode; /* NOTE: Only used for LPDDR */ + uint16_t zq = 0; + switch (zq_type) { + case ZQ_INIT: + zq = BIT(10); + opcode = 0xff; + break; + case ZQ_LONG: + zq = BIT(10); + opcode = 0xab; + break; + case ZQ_SHORT: + opcode = 0x56; + break; + case ZQ_RESET: + opcode = 0xc3; + break; + default: + die("%s: ZQ type %u is invalid\n", __func__, zq_type); + } + + /* ZQCS on single-channel needs a longer delay */ + const uint8_t delay = zq_type == ZQ_SHORT && (!ctrl->dpc[0] || !ctrl->dpc[1]) ? 7 : 1; + enum raminit_status status = RAMINIT_STATUS_SUCCESS; + for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { + if (!(BIT(channel) & chanmask) || !does_ch_exist(ctrl, channel)) + continue; + + status = reut_write_cadb_cmd_all(ctrl, channel, 0xf, CADB_CMD_ZQ, 0, zq, delay); + if (status) + break; + } + + /* Wait a bit after ZQ INIT and ZQCL commands */ + if (zq) + udelay(1); + + return status; +} diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h index 2acc5cbbc8..4fc78a7f43 100644 --- a/src/northbridge/intel/haswell/registers/mchbar.h +++ b/src/northbridge/intel/haswell/registers/mchbar.h @@ -96,15 +96,36 @@ #define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) +#define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) + +#define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch) + +#define REUT_ch_PAT_CADB_WRITE_PTR(ch) _MCMAIN_C(0x41bc, ch) +#define REUT_ch_PAT_CADB_PROG(ch) _MCMAIN_C(0x41c0, ch) + #define TC_ZQCAL_ch(ch) _MCMAIN_C(0x4290, ch) #define TC_RFP_ch(ch) _MCMAIN_C(0x4294, ch) #define TC_RFTP_ch(ch) _MCMAIN_C(0x4298, ch) +#define TC_MR2_SHADOW_ch(ch) _MCMAIN_C(0x429c, ch) #define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) #define TC_SRFTP_ch(ch) _MCMAIN_C(0x42a4, ch) +#define REUT_GLOBAL_ERR 0x4804 + +#define REUT_ch_SEQ_CFG(ch) (0x48a8 + 8 * (ch)) + +#define REUT_ch_SEQ_CTL(ch) (0x48b8 + 4 * (ch)) + /* MCMAIN broadcast */ #define MCSCHEDS_CBIT 0x4c20 +#define MCSCHEDS_DFT_MISC 0x4c30 + +#define REUT_ERR_DATA_STATUS 0x4ce0 + +#define REUT_MISC_CKE_CTRL 0x4d90 +#define REUT_MISC_ODT_CTRL 0x4d94 + #define MCMNTS_SC_WDBWM 0x4f8c /* MCDECS */ diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index 07f4b9dc16..5b3696347c 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -586,6 +586,8 @@ void mainboard_config_rcba(void); #define ACPIIRQEN 0x31e0 /* 32bit */ #define OIC 0x31fe /* 16bit */ #define PRSTS 0x3310 /* 32bit */ +#define PM_CFG2 0x333c /* 32bit */ +#define PM_CFG2_DRAM_RESET_CTL (1 << 26) /* ULT only */ #define PMSYNC_CONFIG 0x33c4 /* 32bit */ #define PMSYNC_CONFIG2 0x33cc /* 32bit */ #define SOFT_RESET_CTRL 0x38f4 -- 2.39.5