From 948221e226340c1c5852a73d005ada18120de393 Mon Sep 17 00:00:00 2001 From: Nicholas Chin Date: Mon, 4 Mar 2024 18:05:43 -0700 Subject: [PATCH 23/39] mb/dell: Add Latitude E5420 (Sandy Bridge) Mainboard is Krug 14". I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A02 of the vendor firmware. This was originally tested and found to be working as a standalone board port in Libreboot, but this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: I0283653156083768e1fd451bcf539b4e028589f4 Signed-off-by: Nicholas Chin --- src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- .../dell/snb_ivb_latitude/Kconfig.name | 3 + .../snb_ivb_latitude/variants/e5420/data.vbt | Bin 0 -> 6144 bytes .../variants/e5420/early_init.c | 14 ++ .../snb_ivb_latitude/variants/e5420/gpio.c | 195 ++++++++++++++++++ .../variants/e5420/hda_verb.c | 32 +++ .../variants/e5420/overridetree.cb | 39 ++++ 7 files changed, 292 insertions(+), 1 deletion(-) create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig index 4e94a7ef80..e6a21ffb99 100644 --- a/src/mainboard/dell/snb_ivb_latitude/Kconfig +++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig @@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON select SYSTEM_TYPE_LAPTOP select USE_NATIVE_RAMINIT +config BOARD_DELL_LATITUDE_E5420 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_6144 + select SOUTHBRIDGE_INTEL_BD82X6X + config BOARD_DELL_LATITUDE_E5520 select BOARD_DELL_SNB_IVB_LATITUDE_COMMON select BOARD_ROMSIZE_KB_6144 @@ -60,6 +65,7 @@ config MAINBOARD_DIR default "dell/snb_ivb_latitude" config MAINBOARD_PART_NUMBER + default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 @@ -74,6 +80,7 @@ config USBDEBUG_HCD_INDEX default 2 config VARIANT_DIR + default "e5420" if BOARD_DELL_LATITUDE_E5420 default "e5520" if BOARD_DELL_LATITUDE_E5520 default "e6420" if BOARD_DELL_LATITUDE_E6420 default "e6520" if BOARD_DELL_LATITUDE_E6520 @@ -82,7 +89,8 @@ config VARIANT_DIR default "e6530" if BOARD_DELL_LATITUDE_E6530 config VGA_BIOS_ID - default "8086,0116" if BOARD_DELL_LATITUDE_E6520 + default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \ + || BOARD_DELL_LATITUDE_E5420 default "8086,0166" if BOARD_DELL_LATITUDE_E5530 default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ || BOARD_DELL_LATITUDE_E5520 diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name index 7976691f21..a3fa2b1837 100644 --- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name @@ -1,5 +1,8 @@ ## SPDX-License-Identifier: GPL-2.0-only +config BOARD_DELL_LATITUDE_E5420 + bool "Latitude E5420" + config BOARD_DELL_LATITUDE_E5520 bool "Latitude E5520" diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt new file mode 100644 index 0000000000000000000000000000000000000000..98b82fe6110fd295b5749041ec7f8c084ace5f57 GIT binary patch literal 6144 zcmeHKeQZ-z6hE);wSBvNZ!2$ObQ^;MgV6zl*Rhp}BXnCCMZU^_r7jRwT!kfLo8?3H zk9)u(7?cb(hChhTM57@QFfmbMB!G!dNsO6BW5OSp5EGF^jHnTTdhUBI+h`e+1ft1q z^SfW?+;h)4_uO+|XEfEV$91)}c;!*XQ5O z)OU7u$J@4U+lk)#GSW%c%c)v`%R6?`w)LIyu6bD7-j0o&X9qUMcEsYlW3BU4rZRvt zqAUpjf*qXuLCCsU0YM2I5@gB1WKd)f1+Yt?%HWd0DZxYumP(Ke?=ER{f^&}W<0k@mxff(?6+Stw+s6y%k1mM$cLk#^FWWI*9bE1GY z&VY9?WC1u#23^3^UYw5?H0x2S2gN`x18Fko6_x(#MKyuCU_DV zdkf*li41yW3p$*0Oo3+63kO6S91*KwP#l2i4jnc)JkUirL^$k}VbH0;CBh#BS=OLf zW-yE3BRon75gG{_2~QIC5cUzCC%i)FCmbidM>tIwAPf>N5Pl?FC0r*+Sq!oXj!keQ zVKcyK>TL+gc7oLco$28+FpeeXkEP}_Sea=mk#IWUR^m$!BogvszLPu83FJm0k6K*}ACcP}M4exU`*MKVwl5+t6JBpTkmm}xWflKUe~7}`!#%z#gAo{NxUrpDAndYktu zI0}VLU`J7^xmF1AFiz5S^uzp*DPI$%$qq!(ikh0kP+(GKzF|@N?Y%_#Vp@M+xHr$F z=%+18z`-fT%z)9-TS$~Dh@2yeN7!UIt0h`fWxUu`JvA_ra*8P48l%7KR0&c1;0R75 z4f0oz(xQ3MWqz5>qW5M4tZWExHs8X@p!@CBU=7e{5^Jl{s7by`po-AJqM2l znk(=^0bHkF0rUw7)^7j;$=_UIs8`6P6b-;vPDZ#U9L)W1_PAYRDP9k~;5$stt5ZiV zD0>;i-?OlYY2}P9WVnfGos4xee2r=EGWHR}ADH$VV>cO=xU?!4TjIi)OMBYI_PX#b zm-eBHed5BOT-x6*W>;{IqAga~G6lCQT93k>Q}CpsomJR*1%FjEkv?fuT%c-8RklXO zU8;6KWk*zeU)4TW+1D!mrE0EhHZfbBeN{4S7X@Pig%};A99QTdA~wZruL*8y?K!jP zG5R*k=);S}ZnA}on(uzNF zyu>BcjA})C@bg%<;+Eh2;Sz4heFFCbZ@C{FrXMIbYzu>?Bi-|vZ}JSFU%JA>7$7et z0Yo%CnOVZm#ZA}4kWZOn15};h5*#OM3b+6vHzgruMP>=5MNJK1y42{YgveP-!j%#( z0rGe@8t%!=66Ti%K4|Gx=o7gFp83wQ;+s3H7+r^SKlpp3KKcr!3@|n;NCH_=qL=3T zq3WH?en`b+W-HR-fnrhw*9aZ%M}lHX7@H?E>!6wv_&YQFEHdA$%Z1R--yub>=c@p? z6@7Fc$&>sAxwiz{BE$1kb$K9Co=ozlA973y^i(^BM|EZ$$^y`0KyHiMJ%O*XbfEX1 ziZaH>W(1pWL0bo|T!x__N$^$DpmxI=bL6WUK3JGyn?rw-qC4ZA$yGjIB}N(=ldD2O zAJ@bxp2>n}u*mUIYFd>}O_wuwBD^r9<#=!0 X1LGbT_rSOZ#yv3ZfpHH!G!Og(1Xg~J literal 0 HcmV?d00001 diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c new file mode 100644 index 0000000000..ff83db095b --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include + +void bootblock_mainboard_early_init(void) +{ + pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN + | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN + | COMB_LPC_EN | COMA_LPC_EN); + mec5035_early_init(); +} diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c new file mode 100644 index 0000000000..f76b93d9f0 --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c @@ -0,0 +1,195 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_NATIVE, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_GPIO, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio30 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio12 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_NATIVE, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_OUTPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio53 = GPIO_DIR_INPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_NATIVE, + .gpio69 = GPIO_MODE_NATIVE, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio74 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c new file mode 100644 index 0000000000..0bc6c35a63 --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + 0x111d76e7, /* Codec Vendor / Device ID: IDT */ + 0x1028049b, /* Subsystem ID */ + 11, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x1028049b), + AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), + AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), + AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), + AZALIA_PIN_CFG(0, 0x0d, 0x90170110), + AZALIA_PIN_CFG(0, 0x0e, 0x23011050), + AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), + AZALIA_PIN_CFG(0, 0x10, 0x400000f3), + AZALIA_PIN_CFG(0, 0x11, 0x400000f0), + AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), + AZALIA_PIN_CFG(0, 0x20, 0xd5a30130), + + 0x80862805, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(3, 0x80860101), + AZALIA_PIN_CFG(3, 0x05, 0x18560010), + AZALIA_PIN_CFG(3, 0x06, 0x18560020), + AZALIA_PIN_CFG(3, 0x07, 0x18560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb new file mode 100644 index 0000000000..3f55bfd49d --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb @@ -0,0 +1,39 @@ +## SPDX-License-Identifier: GPL-2.0-or-later + +chip northbridge/intel/sandybridge + device domain 0 on + subsystemid 0x1028 0x049b inherit + + device ref igd on + register "gpu_cpu_backlight" = "0x00000c31" + register "gpu_pch_backlight" = "0x13121312" + end + + chip southbridge/intel/bd82x6x + register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" + register "usb_port_config" = "{ + { 1, 1, 0 }, + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 1, 1, 2 }, + { 1, 1, 2 }, + { 1, 1, 3 }, + { 1, 1, 3 }, + { 1, 1, 5 }, + { 1, 1, 5 }, + { 1, 1, 7 }, + { 1, 1, 6 }, + { 1, 1, 6 }, + { 1, 1, 7 }, + }" + + device ref gbe off end + device ref pcie_rp4 off end + device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet + device ref sata1 on + register "sata_port_map" = "0x3b" + end + end + end +end -- 2.39.2