From a7e2fde426280a944916c341586361f3ac9fa9a8 Mon Sep 17 00:00:00 2001 From: Nicholas Chin <nic.c3.14@gmail.com> Date: Wed, 7 Feb 2024 10:23:38 -0700 Subject: [PATCH 22/65] mb/dell: Add Latitude E5520 (Sandy Bridge) Mainboard is Krug 15". I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A14 of the vendor firmware. This was originally tested and found to be working as a standalone board port in Libreboot, but this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> --- src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- .../dell/snb_ivb_latitude/Kconfig.name | 3 + .../snb_ivb_latitude/variants/e5520/data.vbt | Bin 0 -> 6144 bytes .../variants/e5520/early_init.c | 14 ++ .../snb_ivb_latitude/variants/e5520/gpio.c | 195 ++++++++++++++++++ .../variants/e5520/hda_verb.c | 32 +++ .../variants/e5520/overridetree.cb | 39 ++++ 7 files changed, 292 insertions(+), 1 deletion(-) create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig index 72bdc96c0a..4e94a7ef80 100644 --- a/src/mainboard/dell/snb_ivb_latitude/Kconfig +++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig @@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON select SYSTEM_TYPE_LAPTOP select USE_NATIVE_RAMINIT +config BOARD_DELL_LATITUDE_E5520 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_6144 + select SOUTHBRIDGE_INTEL_BD82X6X + config BOARD_DELL_LATITUDE_E6420 select BOARD_DELL_SNB_IVB_LATITUDE_COMMON select BOARD_ROMSIZE_KB_10240 @@ -55,6 +60,7 @@ config MAINBOARD_DIR default "dell/snb_ivb_latitude" config MAINBOARD_PART_NUMBER + default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 @@ -68,6 +74,7 @@ config USBDEBUG_HCD_INDEX default 2 config VARIANT_DIR + default "e5520" if BOARD_DELL_LATITUDE_E5520 default "e6420" if BOARD_DELL_LATITUDE_E6420 default "e6520" if BOARD_DELL_LATITUDE_E6520 default "e5530" if BOARD_DELL_LATITUDE_E5530 @@ -77,7 +84,8 @@ config VARIANT_DIR config VGA_BIOS_ID default "8086,0116" if BOARD_DELL_LATITUDE_E6520 default "8086,0166" if BOARD_DELL_LATITUDE_E5530 - default "8086,0126" if BOARD_DELL_LATITUDE_E6420 + default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ + || BOARD_DELL_LATITUDE_E5520 default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ || BOARD_DELL_LATITUDE_E6530 diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name index c7665ac263..7976691f21 100644 --- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name @@ -1,5 +1,8 @@ ## SPDX-License-Identifier: GPL-2.0-only +config BOARD_DELL_LATITUDE_E5520 + bool "Latitude E5520" + config BOARD_DELL_LATITUDE_E6420 bool "Latitude E6420" diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt new file mode 100644 index 0000000000000000000000000000000000000000..b511e75262e37fa123d674e9a7b21a8dfe427729 GIT binary patch literal 6144 zcmeHKZ){Ul6hE);wSBvNZ|mL$bmQOM2BTvXUI!}^N9ejTij1vnu+)Wx6<c9(Y_%K6 zzOV-@f<ehpWB5RHBpMBgG7}RuMuM2=l*E{6G$wq&gqTQ3#E2RZsOP@dvW*rP7>Fjj z&F`Lj?>YC}bI(2Z+}C+6zKyiGrosQXuW7A+&1%<rN+Y1ck(}dLrx)Ma#^x>lnvFGE zeD#gB>*#Tq4&j^|7Xcz1r^pp*)g#T}u1Me3ct>Pgls5Qi3!6e2W0%`a-Ic|3efWuR zXJ@#}wJyGMTXTcY<%@TBKh@(3hP$Gjv}E}rx-%9D_eLXhYe!c&-VyDg-Cdo1>Biji zNNsnlFW#|jdoOj?mZ43m>cVO%UE9@*E7x|%V~c4`XD4l9GCi~@+7pfMibfX8L?!^I zc~Rg1I5SxH1DAEZ0{jA41jrJBh#-l;b6^%g7QrThRe)&%tQH_!ggOD7A_PRRgGuI0 z0zi=n#rCB66d-sO$M~^6wgeb$2fH1|0R`v}xUiWCU`4SF;Dyh&j|mK&6WJWJ&Pq9I zVgmFQfh+)vE}(KWwHA|Oh3fSkss|;2E(2i}s1?gRRV%8!K7U={vHD=s#+Fd)W^M1j z{R4$??VSvEWpgT=vCM&1-U$bI6CB~IV3Z$$Vv7o!EDnev4j~R(MHsazZ~^fLLKGF4 zEfQFOa3dZ?1Q1P#&4?!vyAk^k&m&$z3?WV+-b0*1j37o4=MX<3E+eiYge(Ht2umAW zOPDmU>UL{flI9u|@JtVvfp#o8ek?VfVV9YP5(%pnZX~{PKq4WoWGmV8t$=Ri@{zLQ zNYYt4<$0Ry&qIoG;7s-t333)Nu8opN{NG!)&!I@eO(cVx8vBVEBvotJ7%yNl$7iQ_ zI=xk30+V$ff`F6<wRoF(TK%j9nsr#H23umU%)_7jNOl%*FPU567qbg;4gtp711nj2 z#+kHw`v4|5cA+`UMIvAl;slnH1nl0v=xH<al>1}ljxDE1dcda^&!do|r^eJkI?aC- zEQMSfm?<w*Unzumkj_w5>VYL6W4=aCiy4rk%xq~5LV?bi|GL2$G7li<%c7yd;6T34 zQBN5huZ3~6`ChGkpb$Bg5ITb#2iK-qs|1`=sl6Dhn(Lj&8Agt?S{sTDmmtRj7Jm_1 zFnt{w&FdFkWS3bl>OeL?eO+*i{)9G!cSI-InGt|U0eEYmRCOHm7|I;#LO8ksRIeJ# zGe+jTwPg4C4TYuN(9zULV3k+hI$YuPo=%N8oZ#u_4S!3Xelt6N0BmuC`hCNeg+&97 z6*!>)uHvr%2004GZv?!_-y&|TRmil=9D%Q`1aXBsnD^gov3*UZI34&1_vn(B=T4kZ z_A>ClXVIBNaS^hd&^DrU6VgZMYeadMkdFxcktn|ra-Gl;n^I{bt86rCQ=YMry*B!$ zP5ID9KDE)GZOY#^VwPyRq^y+48j0?ZlzxdkC()CV@`*&wO7vGr;qjA3rb}gIwM-gi zx>HsT$mEDj-<OpyWb%zn|B@A3Hkp<!FT5;hrt_SZiy?*wDaIu{h>%Ir=@rh7)SR;b zAEWQGv_X1)wq0y5Ha0c~&psIsln<Hiu3;#Lf;%*eI<@?p8cfMJV(IYi8q$NA#iS8` z_~|4t4b^wtMSAeFST^F8-Tm<zu8D&j^8=&I4;I}Im>aeSK~X8*^Z9SE44_`P#KIUL zf6^N2f>5HCPWM3N+f0MyWOV^kz~!-wVc4MRXOY>4Jsxd1RyBKEMzNf{RKhesKFdbq zJ(*d<l2Y#n?E?~iBA39P?~Pr2d#}5=#Sfl-VGzGUF$4U2KcqCIVlwkC(&7PQk_X!a z8}3Jgq-&U*Co|h1>l)ZQGyW_x->i#;FvQ*=Nv&nG0N5@D@jjv_Q}K}6MP?1A6`JGe zDwj9pN+x;T4>`I9e5x(uqdK#OGB31ikk@Xv=dxLb4fx(;ktX@rOb~M~?dYQQYiPia z8r;jUQ?sd2@3||-cb2Eb%JFYfxHsONoaJ^eqoKN{<g9?-%`7oWz+aJS0tEc!^d@hD z1-I{%hr!Y?0uVZpUbl__37xn@jkD6Z>3SATgBQlEoN7&ZV9Eni9+>jLln16fFy(=V H=7E0zE^L4Z literal 0 HcmV?d00001 diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c new file mode 100644 index 0000000000..ff83db095b --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootblock_common.h> +#include <device/pci_ops.h> +#include <ec/dell/mec5035/mec5035.h> +#include <southbridge/intel/bd82x6x/pch.h> + +void bootblock_mainboard_early_init(void) +{ + pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN + | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN + | COMB_LPC_EN | COMA_LPC_EN); + mec5035_early_init(); +} diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c new file mode 100644 index 0000000000..f76b93d9f0 --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c @@ -0,0 +1,195 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <southbridge/intel/common/gpio.h> + +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_NATIVE, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_NATIVE, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_NATIVE, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_GPIO, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_GPIO, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_GPIO, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_INPUT, + .gpio30 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio12 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_reset = { +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_INVERT, + .gpio8 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_GPIO, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_NATIVE, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_GPIO, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_OUTPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_INPUT, + .gpio53 = GPIO_DIR_INPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_reset = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_NATIVE, + .gpio69 = GPIO_MODE_NATIVE, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_GPIO, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio74 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +static const struct pch_gpio_set3 pch_gpio_set3_reset = { +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + .reset = &pch_gpio_set1_reset, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + .reset = &pch_gpio_set2_reset, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + .reset = &pch_gpio_set3_reset, + }, +}; diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c new file mode 100644 index 0000000000..1373975352 --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + 0x111d76e7, /* Codec Vendor / Device ID: IDT */ + 0x1028049a, /* Subsystem ID */ + 11, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x1028049a), + AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), + AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), + AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), + AZALIA_PIN_CFG(0, 0x0d, 0x90170110), + AZALIA_PIN_CFG(0, 0x0e, 0x23011050), + AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), + AZALIA_PIN_CFG(0, 0x10, 0x400000f3), + AZALIA_PIN_CFG(0, 0x11, 0xd5a301a0), + AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), + AZALIA_PIN_CFG(0, 0x20, 0x400000f0), + + 0x80862805, /* Codec Vendor / Device ID: Intel */ + 0x80860101, /* Subsystem ID */ + 4, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(3, 0x80860101), + AZALIA_PIN_CFG(3, 0x05, 0x18560010), + AZALIA_PIN_CFG(3, 0x06, 0x18560020), + AZALIA_PIN_CFG(3, 0x07, 0x18560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb new file mode 100644 index 0000000000..479d1b696e --- /dev/null +++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb @@ -0,0 +1,39 @@ +## SPDX-License-Identifier: GPL-2.0-or-later + +chip northbridge/intel/sandybridge + device domain 0 on + subsystemid 0x1028 0x049a inherit + + device ref igd on + register "gpu_cpu_backlight" = "0x00000218" + register "gpu_pch_backlight" = "0x13121312" + end + + chip southbridge/intel/bd82x6x + register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" + register "usb_port_config" = "{ + { 1, 1, 0 }, + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 1, 1 }, + { 1, 1, 2 }, + { 1, 1, 2 }, + { 1, 1, 3 }, + { 1, 1, 3 }, + { 1, 1, 5 }, + { 1, 1, 5 }, + { 1, 1, 7 }, + { 1, 1, 6 }, + { 1, 1, 6 }, + { 1, 1, 7 }, + }" + + device ref gbe off end + device ref pcie_rp4 off end + device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet + device ref sata1 on + register "sata_port_map" = "0x3b" + end + end + end +end -- 2.39.5