From 5c14e8e1bca035e038365b65ab0a68acc98fd2d6 Mon Sep 17 00:00:00 2001
From: Leah Rowe <leah@libreboot.org>
Date: Sun, 26 May 2024 01:54:36 +0100
Subject: general code cleanup in the build system

Signed-off-by: Leah Rowe <leah@libreboot.org>
---
 script/roms  | 393 ++++++++++++++++++++++++++++-------------------------------
 script/trees | 148 ++++++++++------------
 2 files changed, 246 insertions(+), 295 deletions(-)

(limited to 'script')

diff --git a/script/roms b/script/roms
index c1a1b8bc..c4b95302 100755
--- a/script/roms
+++ b/script/roms
@@ -1,10 +1,10 @@
 #!/usr/bin/env sh
 # SPDX-License-Identifier: GPL-3.0-or-later
-# SPDX-FileCopyrightText: 2014-2016,2020,2021,2023,2024 Leah Rowe <leah@libreboot.org>
-# SPDX-FileCopyrightText: 2021,2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# SPDX-FileCopyrightText: 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
-# SPDX-FileCopyrightText: 2023 Riku Viitanen <riku.viitanen@protonmail.com>
+# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
+# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
+# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
+# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
+# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
 
 set -u -e
 
@@ -14,64 +14,56 @@ seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
 grub_background="background1280x800.png"
 grubelf="elf/grub/grub.elf"
 cfgsdir="config/coreboot"
-pico_src_dir="src/pico-serprog"
-pico_sdk_dir="src/pico-sdk"
-stm32_src_dir="src/stm32-vserprog"
+picosrc="src/pico-serprog"
+picosdk="src/pico-sdk"
+stm32src="src/stm32-vserprog"
 
 # Disable all payloads by default.
 # target.cfg files have to specifically enable [a] payload(s)
-pv="payload_grub payload_grub_withseabios payload_seabios payload_memtest t"
-pv="${pv} payload_seabios_withgrub payload_seabios_grubonly payload_uboot memtest_bin"
+pv="payload_uboot payload_grub_withseabios payload_seabios payload_memtest t"
+pv="$pv payload_seabios_withgrub payload_seabios_grubonly payload_grub mt86bin"
 v="romdir cbrom initmode displaymode cbcfg targetdir tree keymaps release"
-v="${v} grub_timeout ubdir board grub_scan_disk uboot_config"
-eval "$(setvars "n" ${pv} serprog)"
-eval "$(setvars "" ${v} boards _displaymode _payload _keyboard all targets \
+v="$v grub_timeout ubdir board grub_scan_disk uboot_config"
+eval "$(setvars "n" $pv serprog)"
+eval "$(setvars "" $v boards _displaymode _payload _keyboard all targets \
     serprog_boards_dir)"
 
 main()
 {
 	while [ $# -gt 0 ]; do
-		case ${1} in
-		list)
-			x_ items config/coreboot
-			return 0 ;;
-		serprog)
-			serprog="y"
-			shift 1; break ;;
-		-d) _displaymode="${2}" ;;
-		-p) _payload="${2}" ;;
-		-k) _keyboard="${2}" ;;
+		case "$1" in
+		list) x_ items config/coreboot; return 0 ;;
+		serprog) serprog="y"; shift 1; break ;;
+		-d) _displaymode="$2" ;;
+		-p) _payload="$2" ;;
+		-k) _keyboard="$2" ;;
 		*)
-			[ "${1}" = "all" ] && all="y"
-			boards="${1} ${boards}"
+			[ "$1" = "all" ] && all="y"
+			boards="$1 $boards"
 			shift && continue ;;
 		esac
 		shift 2
 	done
 
 	if [ "$serprog" = "y" ]; then
-		handle_serprog $@
-		return 0
+		handle_serprog $@; return 0
 	else
-		[ "${all}" != "y" ] || boards=$(items config/coreboot) || \
+		[ "$all" != "y" ] || boards="$(items config/coreboot)" || \
 			$err "Cannot generate list of boards for building"
-		for x in ${boards}; do
+		for x in $boards; do
 			[ -d "config/coreboot/$x/config" ] && \
-				handle_coreboot_target "$x" && continue
-			printf "No configs for %s; skipping\n" "$x"
+				handle_coreboot_target "$x"; continue
 		done
 	fi
 
-	bstr="directories"
-	[ "$xbmk_release" = "y" ] && bstr="tarballs"
+	x="directories"
+	[ "$xbmk_release" = "y" ] && x="archives (remember the inject command)"
 
-	[ -z "${targets}" ] && $err "No ROM images were compiled"
+	[ -z "$targets" ] && $err "No ROM images were compiled"
 	printf "\nROM images available in these %s:\n" "$bstr"
-	eval "printf \"${targets}\""
+	eval "printf \"$targets\""
 	printf "^^ ROM images available in these %s.\n\n" "$bstr"
 
-	[ "$xbmk_release" = "y" ] && \
-		printf "Always run the inject command on release images!\n"
 	printf "DO NOT flash images from elf/ - please use bin/ instead.\n"
 }
 
@@ -79,25 +71,24 @@ handle_serprog()
 {
 	[ -z "${1+x}" ] && $err "bad command. Check $projectname docs."
 	[ "$1" != "rp2040" ] && [ "$1" != "stm32" ] && $err "bad command"
-	if [ "${1}" = "rp2040" ]; then
-		serprog_boards_dir=${pico_sdk_dir}/src/boards/include/boards
-		[ -d "$pico_src_dir" ] || x_ ./update trees -f "pico-serprog"
-	elif [ "${1}" = "stm32" ]; then
-		serprog_boards_dir=${stm32_src_dir}/boards
-		[ -d "$stm32_src_dir" ] || x_ ./update trees -f "stm32-vserprog"
+	if [ "$1" = "rp2040" ]; then
+		serprog_boards_dir="$picosdk/src/boards/include/boards"
+		[ -d "$picosrc" ] || x_ ./update trees -f "pico-serprog"
+	elif [ "$1" = "stm32" ]; then
+		serprog_boards_dir="$stm32src/boards"
+		[ -d "$stm32src" ] || x_ ./update trees -f "stm32-vserprog"
 	fi
-	x_ mkdir -p "bin/serprog_${1}"
+	x_ mkdir -p "bin/serprog_$1"
 
-	if [ $# -gt 1 ] && [ "${2}" = "list" ]; then
-		list_serprog_boards ${serprog_boards_dir}
+	if [ $# -gt 1 ] && [ "$2" = "list" ]; then
+		list_serprog_boards "$serprog_boards_dir"
 		return 0
 	elif [ $# -gt 1 ]; then
-		build_${1}_rom "${2}"
+		build_${1}_rom "$2"
 	else
-		printf "Building all serprog targets\n"
-		list_serprog_boards "${serprog_boards_dir}" | \
+		list_serprog_boards "$serprog_boards_dir" | \
 			while read -r board; do
-				build_${1}_rom "${board}"
+				build_${1}_rom "$board"
 			done
 	fi
 
@@ -106,75 +97,70 @@ handle_serprog()
 
 build_rp2040_rom()
 {
-	board=${1}
-	printf "Building pico-serprog for %s\n" "${board}"
-	x_ cmake -DPICO_BOARD="$board" -DPICO_SDK_PATH="$pico_sdk_dir" \
-	    -B "${pico_src_dir}/build" "${pico_src_dir}"
-	x_ cmake --build "${pico_src_dir}/build"
-	x_ mv ${pico_src_dir}/build/pico_serprog.uf2 \
-	   bin/serprog_rp2040/serprog_${board}.uf2
+	board="$1"
+	printf "Building pico-serprog for %s\n" "$board"
+	x_ cmake -DPICO_BOARD="$board" -DPICO_SDK_PATH="$picosdk" \
+	    -B "$picosrc/build" "$picosrc"
+	x_ cmake --build "$picosrc/build"
+	x_ mv "$picosrc/build/pico_serprog.uf2" \
+	   "bin/serprog_rp2040/serprog_$board.uf2"
 	printf "output to bin/serprog_rp2040/serprog_%s.uf2\n" "$board"
 }
 
 build_stm32_rom()
 {
-	board=${1}
-	printf "Building stm32-vserprog for %s\n" "${board}"
-	x_ make -C $stm32_src_dir libopencm3-just-make BOARD=$board
-	x_ make -C ${stm32_src_dir} BOARD=${board}
-	x_ mv ${stm32_src_dir}/stm32-vserprog.hex \
-	   bin/serprog_stm32/serprog_${board}.hex
+	board="$1"
+	printf "Building stm32-vserprog for %s\n" "$board"
+	x_ make -C "$stm32src" libopencm3-just-make BOARD=$board
+	x_ make -C "$stm32src" BOARD=$board
+	x_ mv "$stm32src/stm32-vserprog.hex" \
+	   "bin/serprog_stm32/serprog_$board.hex"
 	printf "output to bin/serprog_stm32/serprog_%s.hex\n" "$board"
 }
 
 list_serprog_boards()
 {
-	basename -a -s .h "${1}/"*.h || $err "list_boards $1: can't list boards"
+	basename -a -s .h "$1/"*.h || $err "$1: can't list boards"
 }
 
 handle_coreboot_target()
 {
-	eval "$(setvars "n" ${pv}) $(setvars "" ${v})"
+	eval "$(setvars "n" $pv) $(setvars "" $v)"
 	grub_background="background1280x800.png"
 	board="$1"
 
 	configure_target
 	[ "$board" = "$tree" ] && return 0
-	if [ "$xbmk_release" = "y" ] && [ "$release" = "n" ]; then
-		printf "Target '%s' disabled for release.\n" "$board"
-		return 0
-	fi
+	[ "$xbmk_release" = "y" ] && [ "$release" = "n" ] && return 0
 
 	build_payloads
 	build_target_mainboard
 
-	[ -d "bin/${board}" ] || return 0
-	[ "$xbmk_release" = "y" ] || targets="* bin/${board}\n${targets}"
+	[ -d "bin/$board" ] || return 0
+	[ "$xbmk_release" = "y" ] || targets="* bin/$board\n$targets"
 	[ "$xbmk_release" = "y" ] && mkrom_tarball "bin/$board" && \
-	targets="* bin/${relname}_$board.tar.xz\n$targets"; return 0
+	    targets="* bin/${relname}_$board.tar.xz\n$targets"; return 0
 }
 
 configure_target()
 {
-	targetdir="${cfgsdir}/${board}"
-	[ -f "${targetdir}/target.cfg" ] || \
-		$err "Missing target.cfg for target: ${board}"
+	targetdir="$cfgsdir/$board"
+	[ -f "$targetdir/target.cfg" ] || $err "$board: target.cfg missing"
 
 	# Override the above defaults using target.cfg
-	. "${targetdir}/target.cfg"
+	. "$targetdir/target.cfg"
 
-	[ -z "${grub_scan_disk}" ] && grub_scan_disk="both"
-	[ "$grub_scan_disk" != "both" ] && [ "$grub_scan_disk" != "ata" ] \
-	    && [ "${grub_scan_disk}" != "ahci" ] && \
-		grub_scan_disk="both"
+	[ -z "$grub_scan_disk" ] && grub_scan_disk="both"
+	[ "$grub_scan_disk" != "both" ] && [ "$grub_scan_disk" != "ata" ] && \
+	    [ "$grub_scan_disk" != "ahci" ] && grub_scan_disk="both"
 
 	[ -z "$tree" ] && $err "$board: tree not defined"
 
-	[ "${payload_memtest}" != "y" ] && payload_memtest="n"
+	[ "$payload_memtest" != "y" ] && payload_memtest="n"
 	[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
 
-	[ "${payload_grub_withseabios}" = "y" ] && payload_grub="y"
-	[ "${payload_grub_withseabios}" = "y" ] && \
+	[ "$payload_grub_withseabios" = "y" ] && payload_grub="y"
+	[ "$payload_grub_withseabios" = "y" ] && \
 		eval "$(setvars "y" payload_seabios payload_seabios_withgrub)"
 	[ "$payload_seabios_withgrub" = "y" ] && payload_seabios="y"
 	[ "$payload_seabios_grubonly" = "y" ] && payload_seabios="y"
@@ -183,8 +169,7 @@ configure_target()
 	# The reverse logic must not be applied. If SeaBIOS-with-GRUB works,
 	# that doesn't mean GRUB-with-SeaBIOS will, e.g. VGA ROM execution
 	[ "$payload_grub" != "y" ] && [ "$payload_seabios" != "y" ] && \
-	    [ "${payload_uboot}" != "y" ] && \
-		$err "target '$board' defines no payload"
+	    [ "$payload_uboot" != "y" ] && $err "'$board' defines no payload"
 
 	[ "$payload_uboot" != "n" ] && [ "$payload_uboot" != "y" ] && \
 		payload_uboot="n"
@@ -192,32 +177,32 @@ configure_target()
 		uboot_config="default"
 
 	# Override all payload directives with cmdline args
-	[ -z "${_payload}" ] && return 0
+	[ -z "$_payload" ] && return 0
 	eval "$(setvars "n" payload_grub payload_memtest payload_seabios \
 	    payload_seabios_withgrub payload_uboot payload_grub_withseabios \
 	    payload_seabios_grubonly)"
-	eval "payload_${_payload}=y"
+	eval "payload_$_payload=y"
 }
 
 build_payloads()
 {
-	romdir="bin/${board}"
-	cbdir="src/coreboot/${board}"
-	[ "${board}" = "${tree}" ] || cbdir="src/coreboot/${tree}"
-	cbfstool="cbutils/${tree}/cbfstool"
-	cbrom="${cbdir}/build/coreboot.rom"
+	romdir="bin/$board"
+	cbdir="src/coreboot/$board"
+	[ "$board" = "$tree" ] || cbdir="src/coreboot/$tree"
+	cbfstool="cbutils/$tree/cbfstool"
+	cbrom="$cbdir/build/coreboot.rom"
 
 	[ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree
 
-	memtest_bin="memtest86plus/build64/memtest.bin"
-	[ "${payload_memtest}" != "y" ] || [ -f "src/${memtest_bin}" ] || \
+	mt86bin="memtest86plus/build64/memtest.bin"
+	[ "$payload_memtest" != "y" ] || [ -f "src/$mt86bin" ] || \
 		x_ ./update trees -b memtest86plus
 
 	[ "$payload_seabios" = "y" ] && x_ ./update trees -b seabios
 	if [ "$payload_grub" = "y" ] || [ "$payload_seabios_withgrub" = "y" ] \
 	    || [ "$payload_seabios_grubonly" = "y" ]; then build_grub_payload
 	fi
-	[ "${payload_uboot}" = "y" ] && build_uboot_payload; return 0
+	[ "$payload_uboot" = "y" ] && build_uboot_payload; return 0
 }
 
 build_grub_payload()
@@ -225,234 +210,222 @@ build_grub_payload()
 	x_ mkdir -p elf/grub
 
 	for keymapfile in config/grub/keymap/*.gkb; do
-		[ -f "${keymapfile}" ] || continue
-
-		keymaps="${keymaps} ${keymapfile}"
+		[ -f "$keymapfile" ] && keymaps="$keymaps $keymapfile"
 	done
 	[ -z "$_keyboard" ] || [ -f "$grubcfgsdir/keymap/$_keyboard.gkb" ] || \
 		$err "build_grub_payload: $_keyboard layout not defined"
-	[ -n "$_keyboard" ] && keymaps="${grubcfgsdir}/keymap/${_keyboard}.gkb"
+	[ -n "$_keyboard" ] && keymaps="$grubcfgsdir/keymap/$_keyboard.gkb"
 	[ -f "$grubelf" ] && return 0
 	[ -f "src/grub/grub-mkstandalone" ] || x_ ./update trees -b grub
 
 	./src/grub/grub-mkstandalone --grub-mkimage="src/grub/grub-mkimage" \
 	    -O i386-coreboot -o "elf/grub/grub.elf" -d "src/grub/grub-core/" \
-	    --fonts= --themes= --locales=  --modules="${grub_modules}" \
-	    --install-modules="${grub_install_modules}" \
-	    "/boot/grub/grub.cfg=${grubcfgsdir}/config/grub_memdisk.cfg" \
-	    "/boot/grub/grub_default.cfg=${grubcfgsdir}/config/grub.cfg" || \
+	    --fonts= --themes= --locales=  --modules="$grub_modules" \
+	    --install-modules="$grub_install_modules" \
+	    "/boot/grub/grub.cfg=$grubcfgsdir/config/grub_memdisk.cfg" \
+	    "/boot/grub/grub_default.cfg=$grubcfgsdir/config/grub.cfg" || \
 	    $err "could not generate grub.elf"
 }
 
 build_uboot_payload()
 {
-	x_ ./update trees -b u-boot ${board}
-	ubdir="elf/u-boot/${board}/${uboot_config}"
-	ubootelf="${ubdir}/u-boot.elf"
-	[ ! -f "${ubootelf}" ] && [ -f "${ubdir}/u-boot" ] && \
-		ubootelf="${ubdir}/u-boot"
-	[ -f "${ubootelf}" ] || $err "$board: Can't find u-boot"; return 0
+	x_ ./update trees -b u-boot $board
+	ubdir="elf/u-boot/$board/$uboot_config"
+	ubootelf="$ubdir/u-boot.elf"
+	[ ! -f "$ubootelf" ] && [ -f "$ubdir/u-boot" ] && \
+		ubootelf="$ubdir/u-boot"
+	[ -f "$ubootelf" ] || $err "$board: Can't find u-boot"; return 0
 }
 
 build_target_mainboard()
 {
-	x_ rm -Rf "${romdir}"
+	x_ rm -Rf "$romdir"
 
 	for x in "normal" "vgarom" "libgfxinit"; do
-		initmode="${x}"
+		initmode="$x"
 		hmode="vesafb"
-		[ "${initmode}" = "vgarom" ] || hmode="corebootfb"
-		modes="${hmode} txtmode"
-		[ -z "${_displaymode}" ] || modes="${_displaymode}"
-		for y in ${modes}; do
-			displaymode="${y}"
-			[ "${initmode}" = "normal" ] && \
+		[ "$initmode" = "vgarom" ] || hmode="corebootfb"
+		modes="$hmode txtmode"
+		[ -z "$_displaymode" ] || modes="$_displaymode"
+		for y in $modes; do
+			displaymode="$y"
+			[ "$initmode" = "normal" ] && \
 			    [ "$displaymode" != "txtmode" ] && continue
-			cbcfg="${targetdir}/config/${initmode}_${displaymode}"
-			[ "${initmode}" = "normal" ] && cbcfg="${cbcfg%_*}"
-			build_roms "${cbcfg}"
-			x_ rm -f "$cbrom"
+			cbcfg="$targetdir/config/${initmode}_$displaymode"
+			[ "$initmode" = "normal" ] && cbcfg="${cbcfg%_*}"
+			build_roms "$cbcfg"; x_ rm -f "$cbrom"
 		done
 	done
 }
 
 build_roms()
 {
-	cbcfg="${1}"
-	if [ ! -f "${cbcfg}" ]; then
-		printf "'%s' does not exist. Skipping build for %s %s %s\n" \
-		    "$cbcfg" "$board" "$displaymode" "$initmode" 1>&2
-		return 0
-	fi
+	cbcfg="$1"
+	e "$cbcfg" f not && return 0
 
-	x_ ./update trees -b coreboot ${board}
+	x_ ./update trees -b coreboot $board
 
 	_cbrom="elf/coreboot_nopayload_DO_NOT_FLASH"
-	_cbrom="${_cbrom}/${board}/${initmode}_${displaymode}"
-	[ "${initmode}" = "normal" ] && \
-		_cbrom="${_cbrom%"_${displaymode}"}"
-	_cbrom="${_cbrom}/coreboot.rom"
+	_cbrom="$_cbrom/$board/${initmode}_$displaymode"
+	[ "$initmode" = "normal" ] && _cbrom="${_cbrom%"_$displaymode"}"
+	_cbrom="$_cbrom/coreboot.rom"
 	cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
-	x_ cp "${_cbrom}" "${cbrom}"
+	x_ cp "$_cbrom" "$cbrom"
 
-	[ "${payload_memtest}" != "y" ] || \
-		x_ "${cbfstool}" "${cbrom}" add-payload \
-		    -f "src/${memtest_bin}" -n img/memtest -c lzma
-	[ "${payload_seabios}" = "y" ] && build_seabios_roms
+	[ "$payload_memtest" != "y" ] || x_ "$cbfstool" "$cbrom" add-payload \
+	    -f "src/$mt86bin" -n img/memtest -c lzma
+	[ "$payload_seabios" = "y" ] && build_seabios_roms
 	[ "$payload_grub" != "y" ] || x_ build_grub_roms "$cbrom" "grub"
-	[ "${payload_uboot}" = "y" ] || return 0
-	x_ cp "${_cbrom}" "${cbrom}"
+	[ "$payload_uboot" = "y" ] || return 0
+	x_ cp "$_cbrom" "$cbrom"
 	build_uboot_roms
 }
 
 build_seabios_roms()
 {
-	if [ "${payload_seabios_withgrub}" = "y" ]; then
-		t=$(mktemp -t coreboot_rom.XXXXXXXXXX)
-		x_ cp "${cbrom}" "${t}"
-		x_ build_grub_roms "${t}" "seabios_withgrub"
+	if [ "$payload_seabios_withgrub" = "y" ]; then
+		t="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
+		x_ cp "$cbrom" "$t"
+		x_ build_grub_roms "$t" "seabios_withgrub"
 	else
-		t=$(mkSeabiosRom "${cbrom}" "fallback/payload") || \
+		t="$(mkSeabiosRom "$cbrom" "fallback/payload")" || \
 		    $err "build_seabios_roms: cannot build tmprom"
-		newrom="${romdir}/seabios_${board}_${initmode}_${displaymode}"
-		[ "${initmode}" = "normal" ] && newrom="${romdir}/seabios" \
-			&& newrom="${newrom}_${board}_${initmode}"
-		x_ copyrom "${t}" "${newrom}.rom"
+		newrom="$romdir/seabios_${board}_${initmode}_$displaymode"
+		[ "$initmode" = "normal" ] && newrom="$romdir/seabios" \
+			&& newrom="${newrom}_${board}_$initmode"
+		x_ cprom "$t" "$newrom.rom"
 	fi
-	x_ rm -f "${t}"
+	x_ rm -f "$t"
 }
 
 # Make separate ROM images with GRUB payload, for each supported keymap
 build_grub_roms()
 {
-	tmprom="${1}"
-	payload1="${2}" # allow values: grub, seabios, seabios_withgrub
+	tmprom="$1"
+	payload1="$2" # allow values: grub, seabios, seabios_withgrub
 
 	grub_cbfs="fallback/payload"
 	if [ "$payload1" = "grub" ] && [ "$payload_grub_withseabios" = "y" ]
 	then
-		_tmpmvrom=$(mkSeabiosRom "$tmprom" "seabios.elf") || \
+		_tmpmvrom="$(mkSeabiosRom "$tmprom" "seabios.elf")" || \
 		    $err "build_grub_roms 1 $board: can't build tmprom"
 		x_ mv "$_tmpmvrom" "$tmprom"
 	elif [ "$payload1" != "grub" ] && [ "$payload_seabios_withgrub" = "y" ]
 	then
 		grub_cbfs="img/grub2"
-		_tmpmvrom=$(mkSeabiosRom "$tmprom" fallback/payload) || \
+		_tmpmvrom="$(mkSeabiosRom "$tmprom" fallback/payload)" || \
 		    $err "build_grub_roms 2 $board: can't build tmprom"
 		x_ mv "$_tmpmvrom" "$tmprom"
 	fi
 
 	# we only need insert grub.elf once, for each coreboot config:
-	x_ "${cbfstool}" "${tmprom}" add-payload -f "${grubelf}" \
-	    -n ${grub_cbfs} -c lzma
+	x_ "$cbfstool" "$tmprom" add-payload -f "$grubelf" \
+	    -n "$grub_cbfs" -c lzma
 
 	# we only need insert background.png once, for each coreboot config:
-	if [ "${displaymode}" = "vesafb" ] || \
-	    [ "${displaymode}" = "corebootfb" ]; then
-		backgroundfile="config/grub/background/${grub_background}"
-		"${cbfstool}" "${tmprom}" add -f ${backgroundfile} \
-		    -n background.png -t raw || \
-		    $err "insert background, ${backgroundfile}"
+	if [ "$displaymode" = "vesafb" ] || \
+	    [ "$displaymode" = "corebootfb" ]; then
+		backgroundfile="config/grub/background/$grub_background"
+		"$cbfstool" "$tmprom" add -f "$backgroundfile" -n \
+		    background.png -t raw || $err "!bg, $backgroundfile"
 	fi
 
-	tmpcfg=$(mktemp -t coreboot_rom.XXXXXXXXXX)
-	printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" >"$tmpcfg" \
-	    || $err "set grub_scandisk, $grub_scan_disk, $tmpcfg"
-	[ "${grub_scan_disk}" = "both" ] || \
+	tmpcfg="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
+	printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" > "$tmpcfg" || \
+	    $err "set grub_scandisk, $grub_scan_disk, $tmpcfg"
+	[ "$grub_scan_disk" = "both" ] || \
 	    x_ "$cbfstool" "$tmprom" add -f "$tmpcfg" -n scan.cfg -t raw
-	printf "set timeout=%s\n" "${grub_timeout}" > "${tmpcfg}" || \
-	    $err "set timeout, ${grub_timeout}, ${tmpcfg}"
-	[ -z "${grub_timeout}" ] || x_ "${cbfstool}" "${tmprom}" add \
-	    -f "${tmpcfg}" -n timeout.cfg -t raw
-	x_ rm -f "${tmpcfg}"
-
-	for keymapfile in ${keymaps}; do
-		[ -f "${keymapfile}" ] || continue
+	printf "set timeout=%s\n" "$grub_timeout" > "$tmpcfg" || \
+	    $err "set timeout, $grub_timeout, $tmpcfg"
+	[ -z "$grub_timeout" ] || x_ "$cbfstool" "$tmprom" add \
+	    -f "$tmpcfg" -n timeout.cfg -t raw
+	x_ rm -f "$tmpcfg"
+
+	for keymapfile in $keymaps; do
+		[ -f "$keymapfile" ] || continue
 		keymap="${keymapfile##*/}"
 		keymap="${keymap%.gkb}"
 
 		tmpgrubrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
-		x_ cp "${tmprom}" "${tmpgrubrom}"
+		x_ cp "$tmprom" "$tmpgrubrom"
 		x_ "$cbfstool" "$tmpgrubrom" add -f "$keymapfile" \
 		    -n keymap.gkb -t raw
 
-		newrom="${romdir}/${payload1}_${board}_${initmode}_"
-		newrom="${newrom}${displaymode}_${keymap}.rom"
-		[ "${initmode}" = "normal" ] && \
-			newrom="${romdir}/${payload1}_${board}_" && \
-			newrom="${newrom}${initmode}_${keymap}.rom"
-		x_ copyrom "${tmpgrubrom}" "${newrom}"
-		if [ "${payload_seabios_grubonly}" = "y" ]; then
+		newrom="$romdir/${payload1}_${board}_${initmode}_"
+		newrom="$newrom${displaymode}_$keymap.rom"
+		[ "$initmode" = "normal" ] && newrom="$romdir/${payload1}_" \
+		    && newrom="$newrom${board}_${initmode}_$keymap.rom"
+		x_ cprom "$tmpgrubrom" "$newrom"
+		if [ "$payload_seabios_grubonly" = "y" ]; then
 			x_ "$cbfstool" "$tmpgrubrom" add \
 			    -f "config/grub/bootorder" -n bootorder -t raw
-			x_ copyrom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom"
+			x_ cprom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom"
 			x_ "$cbfstool" "$tmpgrubrom" add-int -i 0 \
 			    -n etc/show-boot-menu
-			x_ copyrom "$tmpgrubrom" "${newrom%.rom}_grubonly.rom"
+			x_ cprom "$tmpgrubrom" "${newrom%.rom}_grubonly.rom"
 		fi
-		x_ rm -f "${tmpgrubrom}"
+		x_ rm -f "$tmpgrubrom"
 	done
 }
 
 # make a rom in /tmp/ and then print the path of that ROM
 mkSeabiosRom() {
-	_cbrom="${1}" # rom to insert seabios in. will not be touched
+	_cbrom="$1" # rom to insert seabios in. will not be touched
 		# (a tmpfile will be made instead)
-	_seabios_cbfs_path="${2}" # e.g. fallback/payload
-	_seabioself="elf/seabios/default/${initmode}/bios.bin.elf"
-	tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
+	_seabios_cbfs_path="$2" # e.g. fallback/payload
+	_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
+	tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
 
-	x_ cp "${_cbrom}" "${tmprom}"
+	x_ cp "$_cbrom" "$tmprom"
 	x_ "$cbfstool" "$tmprom" add-payload -f "$_seabioself" \
-	    -n "${_seabios_cbfs_path}" -c lzma
+	    -n "$_seabios_cbfs_path" -c lzma
 	x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
 
 	z="2"; [ "$initmode" = "vgarom" ] && z="0"
 	x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
 	x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
-	[ "$initmode" != "libgfxinit" ] || \
-		x_ "$cbfstool" "$tmprom" add -f "$seavgabiosrom" \
-		    -n vgaroms/seavgabios.bin -t raw
+	[ "$initmode" != "libgfxinit" ] || x_ "$cbfstool" "$tmprom" add -f \
+	    "$seavgabiosrom" -n vgaroms/seavgabios.bin -t raw
 
-	printf "%s\n" "${tmprom}"
+	printf "%s\n" "$tmprom"
 }
 
 build_uboot_roms()
 {
-	tmprom=$(mkUbootRom "${cbrom}" "fallback/payload") || \
+	tmprom="$(mkUbootRom "$cbrom" "fallback/payload")" || \
 	    $err "build_uboot_roms $board: could not create tmprom"
-	newrom="${romdir}/uboot_payload_${board}_${initmode}_${displaymode}.rom"
-	x_ copyrom "${tmprom}" "${newrom}"
-	x_ rm -f "${tmprom}"
+	newrom="$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
+	x_ cprom "$tmprom" "$newrom"
+	x_ rm -f "$tmprom"
 }
 
 # make a rom in /tmp/ and then print the path of that ROM
 mkUbootRom() {
-	_cbrom="${1}"
-	_uboot_cbfs_path="${2}"
+	_cbrom="$1"
+	_uboot_cbfs_path="$2"
 
-	_ubdir="elf/u-boot/${board}/${uboot_config}"
-	_ubootelf="${_ubdir}/u-boot.elf"
-	[ -f "${_ubootelf}" ] || _ubootelf="${_ubdir}/u-boot"
+	_ubdir="elf/u-boot/$board/$uboot_config"
+	_ubootelf="$_ubdir/u-boot.elf"
+	[ -f "$_ubootelf" ] || _ubootelf="$_ubdir/u-boot"
 	[ -f "$_ubootelf" ] || $err "mkUbootRom: $board: cant find u-boot"
 
-	tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
+	tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
 
-	x_ cp "${_cbrom}" "${tmprom}"
+	x_ cp "$_cbrom" "$tmprom"
 	x_ "$cbfstool" "$tmprom" add-payload -f "$_ubootelf" \
-	    -n "${_uboot_cbfs_path}" -c lzma
+	    -n "$_uboot_cbfs_path" -c lzma
 
-	printf "%s\n" "${tmprom}"
+	printf "%s\n" "$tmprom"
 }
 
-copyrom()
+cprom()
 {
 	printf "Creating target image: %s\n" "$2"
 
 	x_ mkdir -p "${2%/*}"
 	x_ cp "$1" "$2"
-	[ "$xbmk_release" = "y" ] && mksha512sum "${2}" "vendorhashes" && \
-	x_ ./vendor inject -r "${2}" -b "$board" -n nuke; return 0
+	[ "$xbmk_release" = "y" ] && mksha512sum "$2" "vendorhashes" && \
+	    x_ ./vendor inject -r "$2" -b "$board" -n nuke; return 0
 }
 
 main $@
diff --git a/script/trees b/script/trees
index 7da762e8..1c2a3843 100755
--- a/script/trees
+++ b/script/trees
@@ -1,23 +1,23 @@
 #!/usr/bin/env sh
 # SPDX-License-Identifier: GPL-3.0-or-later
-# SPDX-FileCopyrightText: 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
-# SPDX-FileCopyrightText: 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# SPDX-FileCopyrightText: 2023-2024 Leah Rowe <leah@libreboot.org>
+# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
+# Copyright (c) 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
+# Copyright (c) 2023-2024 Leah Rowe <leah@libreboot.org>
 
 set -u -e
 
 . "include/option.sh"
 . "include/git.sh"
 
-eval "$(setvars "" xarch cfgsdir codedir config config_name xlang mode \
-    elfdir listfile project target target_dir targets tree _f target1 \
-    bootstrapargs autoconfargs cmakedir makeargs autogenargs xtree)"
+eval "$(setvars "" xarch cfgsdir cdir config config_name xlang mode makeargs \
+    listfile project target target_dir targets tree _f target1 bootstrapargs \
+    autoconfargs cmakedir elfdir autogenargs xtree)"
 
 main()
 {
 	while getopts f:b:m:u:c:x:s:l:n: option; do
-		_f="${1}"
-		case "${1}" in
+		_f="$1"
+		case "$1" in
 		-b) : ;;
 		-u) mode="oldconfig" ;;
 		-m) mode="menuconfig" ;;
@@ -33,13 +33,13 @@ main()
 	done
 	[ -z "$_f" ] && $err "missing flag (-m/-u/-b/-c/-x/-f/-s/-l/-n)"
 	[ -z "$project" ] && $err "project name not specified"
-	elfdir="elf/${project}"
-	cfgsdir="config/${project}"
+	elfdir="elf/$project"
+	cfgsdir="config/$project"
 
 	remkdir "${tmpgit%/*}"
 
 	_cmd="build_projects"
-	[ -f "config/${project}/build.list" ] && _cmd="build_targets"
+	[ -f "config/$project/build.list" ] && _cmd="build_targets"
 	$_cmd $@
 }
 
@@ -52,8 +52,8 @@ build_projects()
 
 	load_project_config "$cfgsdir"
 
-	codedir="src/${project}"
-	[ -d "$codedir" ] || x_ ./update trees -f "$project"
+	cdir="src/${project}"
+	[ -d "$cdir" ] || x_ ./update trees -f "$project"
 
 	[ "$mode" = "distclean" ] && mode="clean"
 	run_make_command || return 0
@@ -66,15 +66,13 @@ build_targets()
 
 	[ -d "$cfgsdir" ] || $err "directory, $cfgsdir, does not exist"
 
-	listfile="${cfgsdir}/build.list"
+	listfile="$cfgsdir/build.list"
 	[ -f "$listfile" ] || $err "list file, $listfile, does not exist"
 
 	# Build for all targets if no argument is given
 	[ $# -gt 0 ] && target1="$1"
-	[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && \
-		shift 1
-	targets=$(items "$cfgsdir") || \
-	    $err "Cannot get options for $cfgsdir"
+	[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && shift 1
+	targets="$(items "$cfgsdir")" || $err "Can't get options for $cfgsdir"
 	[ $# -gt 0 ] && targets=$@
 
 	[ -z "$mode" ] && x_ mkdir -p "$elfdir"
@@ -84,17 +82,15 @@ build_targets()
 handle_targets()
 {
 	for x in $targets; do
-		target="${x}"
-		printf "Running 'make %s' for project '%s, target '%s''\n" \
-		    "$mode" "$project" "$target"
+		target="$x"
+		printf "'make %s', '%s', '%s'\n" "$mode" "$project" "$target"
 		[ "$project" != "coreboot" ] || [ -n "$mode" ] || \
-		    [ "$target1" = "utils" ] || \
-			x_ ./vendor download $target
+		    [ "$target1" = "utils" ] || x_ ./vendor download $target
 		x_ handle_defconfig
 	done
 
 	[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && return 0
-	[ -z "${mode}" ] && printf "Done! Check  %s/\n\n" "$elfdir"; return 0
+	[ -z "$mode" ] && printf "Done! Check  %s/\n\n" "$elfdir"; return 0
 }
 
 handle_defconfig()
@@ -104,13 +100,10 @@ handle_defconfig()
 	[ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && \
 		eval "handle_coreboot_utils \"$tree\"; return 0"
 
-	for y in "${target_dir}/config"/*; do
+	for y in "$target_dir/config"/*; do
 		[ -f "$y" ] || continue
 		config="$y"
-		config_name="${config#"${target_dir}/config/"}"
-
-		printf "handle/make/config %s %s: handling config %s\n" \
-		    "$project" "$target" "$config_name"
+		config_name="${config#"$target_dir/config/"}"
 
 		[ -n "$mode" ] || check_config || continue
 		handle_makefile
@@ -120,23 +113,20 @@ handle_defconfig()
 
 handle_src_tree()
 {
-	target_dir="${cfgsdir}/${target}"
+	target_dir="$cfgsdir/$target"
 	[ "$mode" = "fetch" ] && [ ! -f "CHANGELOG" ] && \
 		eval "fetch_project_trees; return 1;"
 
 	load_project_config "$target_dir"
-
-	x_ mkdir -p "${elfdir}/${target}"
+	x_ mkdir -p "$elfdir/$target"
 
 	[ -z "$tree" ] && $err "handle_src_tree $project/$tree: tree unset"
+	cdir="src/$project/$tree"
 
-	codedir="src/${project}/${tree}"
-
-	if [ ! -d "$codedir" ]; then
+	if [ ! -d "$cdir" ]; then
 		if [ "$mode" = "distclean" ] || \
 		    [ "$mode" = "crossgcc-clean" ]; then
-			printf "Directory %s missing; skipping clean\n" \
-			    "$codedir" 1>&2
+			printf "Directory %s missing; skip\n" "$cdir" 1>&2
 			return 1
 		fi
 		x_ ./update trees -f "$project" "$target"
@@ -148,28 +138,27 @@ handle_src_tree()
 
 load_project_config()
 {
-	eval "$(setvars "" xarch xlang tree bootstrapargs autoconfargs \
-	    xtree tree_depend makeargs)"
+	eval "$(setvars "" xarch xlang tree bootstrapargs autoconfargs xtree \
+	    tree_depend makeargs)"
 
-	[ -f "${1}/target.cfg" ] || return 0
-	. "${1}/target.cfg" || \
-	    $err "load_project_config ${1}: cannot load target.cfg"; return 0
+	[ -f "$1/target.cfg" ] || return 0
+	. "$1/target.cfg" || $err "loadp $1: can't load target.cfg"; return 0
 }
 
 check_cross_compiler()
 {
 	for _xarch in $xarch; do
-		cbdir="src/coreboot/${tree}"
+		cbdir="src/coreboot/$tree"
 		[ "$project" != "coreboot" ] && cbdir="src/coreboot/default"
 		[ -n "$xtree" ] && cbdir="src/coreboot/$xtree"
 
 		x_ ./update trees -f coreboot ${cbdir#src/coreboot/}
 
-		export PATH="${PWD}/${cbdir}/util/crossgcc/xgcc/bin:$PATH"
+		export PATH="$PWD/$cbdir/util/crossgcc/xgcc/bin:$PATH"
 		export CROSS_COMPILE="${xarch% *}-"
-		[ -n "${xlang}" ] && export BUILD_LANGUAGES="$xlang"
+		[ -n "$xlang" ] && export BUILD_LANGUAGES="$xlang"
 
-		[ -d "${cbdir}/util/crossgcc/xgcc/${_xarch}/" ] && continue
+		[ -d "$cbdir/util/crossgcc/xgcc/$_xarch/" ] && continue
 		x_ make -C "$cbdir" crossgcc-${_xarch%-*} CPUS=$threads \
 		    UPDATED_SUBMODULES=1
 	done
@@ -177,89 +166,78 @@ check_cross_compiler()
 
 check_config()
 {
-	[ -f "$config" ] || $err "check_config: ${project}/${target}: no config"
+	[ -f "$config" ] || $err "check_config $project/$target: no config"
 
-	dest_dir="${elfdir}/${target}/${config_name}"
+	dest_dir="$elfdir/$target/$config_name"
 	# TODO: very hacky check. do it properly (based on build.list)
-	for elftest in "${dest_dir}"/*; do
-		[ -f "$elftest" ] || continue
-		printf "Build already exists, so skipping build\n" 1>&2
-		return 1
+	for elftest in "$dest_dir"/*; do
+		e "$elftest" f && return 1
 	done
 	x_ mkdir -p "$dest_dir"
 }
 
 handle_makefile()
 {
-	x_ make clean -C "$codedir"
-	x_ cp "$config" "${codedir}/.config"
-	[ -n "$mode" ] || make -C "$codedir" silentoldconfig || \
-	    make -C "$codedir" oldconfig || :
+	x_ make clean -C "$cdir" && x_ cp "$config" "$cdir/.config"
+	[ -n "$mode" ] || make -C "$cdir" silentoldconfig || \
+	    make -C "$cdir" oldconfig || :
 
-	run_make_command || $err "handle_makefile $codedir: no makefile!"
+	run_make_command || $err "handle_makefile $cdir: no makefile!"
 
 	_copy=".config"
 	[ "$mode" = "savedefconfig" ] && _copy="defconfig"
-	[ "${mode%config}" = "$mode" ] || x_ cp "$codedir/$_copy" "$config"
+	[ "${mode%config}" = "$mode" ] || x_ cp "$cdir/$_copy" "$config"
 
-	[ -e "${codedir}/.git" ] && [ "$project" = "u-boot" ] && \
-	    [ "$mode" = "distclean" ] && \
-		x_ git -C "$codedir" clean -fdx; return 0
+	[ -e "$cdir/.git" ] && [ "$project" = "u-boot" ] && \
+	    [ "$mode" = "distclean" ] && x_ git -C "$cdir" clean -fdx; return 0
 }
 
 run_make_command()
 {
-	check_cmake "$codedir"
-	[ -z "$mode" ] && check_autoconf "$codedir"
-	check_makefile "$codedir" || return 1
+	check_cmake "$cdir"
+	[ -z "$mode" ] && check_autoconf "$cdir"
+	check_makefile "$cdir" || return 1
 
 	[ "$project" = "coreboot" ] && [ -z "$mode" ] && x_ \
-		printf "%s\n" "${version%%-*}" > "$codedir/.coreboot-version"
-
-	[ "$project" = "coreboot" ] && \
-		makeargs="$makeargs UPDATED_SUBMODULES=1"
+		printf "%s\n" "${version%%-*}" > "$cdir/.coreboot-version" \
+		    && makeargs="$makeargs UPDATED_SUBMODULES=1"
 
-	make -C "$codedir" $mode -j$threads $makeargs || \
-	    $err "run_make $codedir: !make $mode"
+	make -C "$cdir" $mode -j$threads $makeargs || $err "!mk $cdir $mode"
 
 	[ "$mode" != "clean" ] && return 0
-	make -C "$codedir" distclean 2>/dev/null || :
+	make -C "$cdir" distclean 2>/dev/null || :
 }
 
 check_cmake()
 {
-	[ -z "${cmakedir}" ] || \
-		check_makefile "${1}" || \
-		    cmake -B "${1}" "${1}/${cmakedir}" || \
-		    check_makefile "${1}" || \
-		    $err "check_cmake ${1}: can't cmake ${cmakedir}"
-	[ -z "${cmakedir}" ] || check_makefile "${1}" || \
-		$err "check_cmake ${1}: can't generate Makefile"; return 0
+	[ -z "$cmakedir" ] || check_makefile "$1" || cmake -B "$1" \
+	    "$1/$cmakedir" || check_makefile "$1" || $err "$1: !cmk $cmakedir"
+	[ -z "$cmakedir" ] || check_makefile "$1" || \
+		$err "check_cmake $1: can't generate Makefile"; return 0
 }
 
 check_autoconf()
 {
 	(
-	cd "${1}" || $err "!cd $1"
+	cd "$1" || $err "!cd $1"
 	[ -f "bootstrap" ] && x_ ./bootstrap $bootstrapargs
-	[ -f "autogen.sh" ] && x_ ./autogen.sh ${autogenargs}
+	[ -f "autogen.sh" ] && x_ ./autogen.sh $autogenargs
 	[ -f "configure" ] && x_ ./configure $autoconfargs; return 0
 	) || $err "can't bootstrap project: $1"
 }
 
 check_makefile()
 {
-	[ -f "${1}/Makefile" ] || [ -f "${1}/makefile" ] || \
-	    [ -f "${1}/GNUmakefile" ] || return 1; return 0
+	[ -f "$1/Makefile" ] || [ -f "$1/makefile" ] || \
+	    [ -f "$1/GNUmakefile" ] || return 1; return 0
 }
 
 copy_elf()
 {
 	while read -r f; do
-		[ ! -f "${codedir}/$f" ] || \
-			x_ cp "${codedir}/${f}" "$dest_dir"
+		[ -f "$cdir/$f" ] && x_ cp "$cdir/$f" "$dest_dir"
 	done < "$listfile"
-	x_ make clean -C "$codedir"
+	x_ make clean -C "$cdir"
 }
 
 main $@
-- 
cgit v1.2.1