From bed444ff90242612d9a0b2e8cb8a8970c2027900 Mon Sep 17 00:00:00 2001
From: Riku Viitanen <riku.viitanen@protonmail.com>
Date: Sat, 9 Sep 2023 16:49:27 +0300
Subject: Add stm32-vserprog

Tested on a Nucleo-F042K6.

That has an onboard stlink:
`st-flash --format ihex write bin/serprog_stm32/serprog_nucleo-f042k6.hex`

The usb port used for flashing is separate, its is exposed on
the pin header instead. Check boards/nucleo-f042k6.h for usb pinout.

Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
---
 script/build/rp2040/serprog | 64 ---------------------------------------------
 1 file changed, 64 deletions(-)
 delete mode 100755 script/build/rp2040/serprog

(limited to 'script/build/rp2040/serprog')

diff --git a/script/build/rp2040/serprog b/script/build/rp2040/serprog
deleted file mode 100755
index e265cc7a..00000000
--- a/script/build/rp2040/serprog
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/usr/bin/env sh
-
-# compile the serprog firmware for raspberry pi pico
-#
-#	Copyright (C) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
-#
-#	This program is free software: you can redistribute it and/or modify
-#	it under the terms of the GNU General Public License as published by
-#	the Free Software Foundation, either version 3 of the License, or
-#	(at your option) any later version.
-#
-#	This program is distributed in the hope that it will be useful,
-#	but WITHOUT ANY WARRANTY; without even the implied warranty of
-#	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#	GNU General Public License for more details.
-#
-#	You should have received a copy of the GNU General Public License
-#	along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-[ "x${DEBUG+set}" = 'xset' ] && set -v
-set -u -e
-
-. "include/err.sh"
-
-serprog_release_dir=$(pwd)/bin/serprog_rp2040
-sdk_dir=$(pwd)/util-fw/rp2040/pico-sdk
-src_dir=$(pwd)/util-fw/rp2040/pico-serprog
-
-main()
-{
-	printf "Compiling serprog firmware for Raspberry Pi Pico\n"
-
-	[ -d "${src_dir}/" ] || ./update project repo rpi-pico-serprog \
-		|| err "fetch rpi-pico-serprog failed!\n"
-	mkdir -p "${serprog_release_dir}" || \
-	    err "can't create dir: ${serprog_release_dir}"
-
-	boards_dir=${sdk_dir}/src/boards/include/boards
-
-	if [ $# -gt 0 ] ; then
-		buildrom "${1}"
-	else
-		basename -a -s .h ${boards_dir}/*.h | while read board ; do
-			[ "${board}" = "none" ] || buildrom ${board}
-		done
-	fi
-}
-
-# buildrom <board>
-buildrom()
-{
-	board=${1}
-	(cd ${src_dir}; cmake -DPICO_BOARD="${board}" \
-	      -DPICO_SDK_PATH="${sdk_dir}" "${src_dir}" || \
-		err "can't cmake ${src_dir}")
-	make -C ${src_dir} clean
-	make -C ${src_dir}
-	mv ${src_dir}/pico_serprog.uf2 \
-	   ${serprog_release_dir}/serprog_${board}.uf2 \
-		|| err "${board} serprog build failed!"
-}
-
-main $@
-- 
cgit v1.2.1