From 1c62b003ad6014288114300de65844496dffaf72 Mon Sep 17 00:00:00 2001 From: Alper Nebi Yasak Date: Fri, 9 Dec 2022 14:50:03 +0300 Subject: build/roms: Support using "u-boot" ELF file as U-Boot payload U-Boot runtime configuration is done with a device-tree file, which is built alongside the executable in the upstream build system, and must be available to U-Boot at runtime. This device-tree is normally not linked into the default "u-boot" ELF file. So far we have been handling it by re-creating a "u-boot.elf" from the raw binary parts by setting REMAKE_ELF, and using that as the coreboot payload. Unfortunately, that fails to build for x86 boards, more specificly the "coreboot" boards upstream. It's also possible (but discouraged) to set OF_EMBED to embed the device-tree file into the U-Boot itself, in which case we could use the "u-boot" file as the payload on the "coreboot" boards. Add support for using the "u-boot" file as the payload if "u-boot.elf" doesn't exist. Signed-off-by: Alper Nebi Yasak --- resources/scripts/build/boot/roms_helper | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'resources/scripts/build/boot') diff --git a/resources/scripts/build/boot/roms_helper b/resources/scripts/build/boot/roms_helper index f533e6ab..66a7be8f 100755 --- a/resources/scripts/build/boot/roms_helper +++ b/resources/scripts/build/boot/roms_helper @@ -268,14 +268,17 @@ if [ "${payload_grub}" = "y" ] || [ "${payload_seabios_withgrub}" = "y" ]; then fi if [ "${payload_uboot}" = "y" ]; then - if [ "${uboot_config}" = "default" ] && \ - [ -f "payload/u-boot/${board}/u-boot.elf" ]; then - ubootelf="payload/u-boot/${board}/u-boot.elf" + if [ "${uboot_config}" = "default" ]; then + ubdir="payload/u-boot/${board}" else - ubootelf="payload/u-boot/${board}/${uboot_config}/u-boot.elf" + ubdir="payload/u-boot/${board}/${uboot_config}" fi - if [ ! -f "${ubootelf}" ]; then + if [ -f "${ubdir}/u-boot.elf" ]; then + ubootelf="${ubdir}/u-boot.elf" + elif [ -f "${ubdir}/u-boot" ]; then + ubootelf="${ubdir}/u-boot" + else printf "Required U-Boot payloads not yet built. Building now:\n" rm -Rf "payload/u-boot/${board}" # just in case ./build payload u-boot "${board}" @@ -397,9 +400,15 @@ make_uboot_payload_rom() { cbfstool_path="${4}" if [ "${target_uboot_config}" = "default" ]; then - target_ubootelf="payload/u-boot/${board}/u-boot.elf" + target_ubdir="payload/u-boot/${board}" else - target_ubootelf="payload/u-boot/${board}/${target_uboot_config}/u-boot.elf" + target_ubdir="payload/u-boot/${board}/${target_uboot_config}" + fi + + if [ -f "${target_ubdir}/u-boot.elf" ]; then + target_ubootelf="${target_ubdir}/u-boot.elf" + elif [ -f "${target_ubdir}/u-boot" ]; then + target_ubootelf="${target_ubdir}/u-boot" fi tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX) -- cgit v1.2.1