From bca23902f54b554850064be8200c1a21f23aad93 Mon Sep 17 00:00:00 2001 From: Riku Viitanen Date: Sat, 17 Jun 2023 12:46:03 +0300 Subject: Add HP 8300 USDT Still on Gerrit. ME downloader failed with HP update file, so let's just use Lenovo's instead. Both contain identical ME8_5M_Production.bin files. Tested and working: * Native raminit with both DIMMs * Libgfxinit textmode and framebuffer on both DisplayPorts and VGA * External USB2 and USB3 ports: they all work * USB 3.0 SuperSpeed (rear, 4 ports) * Ethernet * Mini-PCIe WLAN * SATA: 2.5" SSD and optical drive bay * SeaBIOS and GRUB (boot to linux) * PS/2 keyboard and mouse * S3 suspend and resume, wake using USB keyboard * Headphone output, line out, internal speaker * Wake on LAN * Rebooting * CMOS options & nvramcui Untested: * Line in, mic input * MXM graphics card * EHCI debug Not working: * Mini-PCIe USB: I couldn't get it working on vendor BIOS either, so maybe it just isn't present * PS/2 keyboard wake from S3 * mSATA (I have no mSATA drives) --- .../patches/0024-Add-HP-8300-USDT-port.patch | 865 +++++++++++++++++++++ 1 file changed, 865 insertions(+) create mode 100644 resources/coreboot/default/patches/0024-Add-HP-8300-USDT-port.patch (limited to 'resources/coreboot/default/patches/0024-Add-HP-8300-USDT-port.patch') diff --git a/resources/coreboot/default/patches/0024-Add-HP-8300-USDT-port.patch b/resources/coreboot/default/patches/0024-Add-HP-8300-USDT-port.patch new file mode 100644 index 00000000..1b6c4be4 --- /dev/null +++ b/resources/coreboot/default/patches/0024-Add-HP-8300-USDT-port.patch @@ -0,0 +1,865 @@ +From c2bc778648e649cc6f0a60d51d1124c1741f35d7 Mon Sep 17 00:00:00 2001 +From: Riku Viitanen +Date: Fri, 16 Jun 2023 23:03:43 +0300 +Subject: [PATCH] Add HP 8300 USDT port + +In Coreboot Gerrit: +https://review.coreboot.org/c/coreboot/+/74906 + +The following is tested and is working: +* Native raminit with both DIMMs +* Libgfxinit textmode and framebuffer on both DisplayPorts and VGA +* External USB2 and USB3 ports: they all work +* USB 3.0 SuperSpeed on Linux-libre (rear, 4 ports) +* Ethernet +* Mini-PCIe WLAN +* SATA: 2.5" SSD and optical drive bay +* Booting Live Linuxes from DVD and USB with SeaBIOS 1.16.1 +* PS/2 keyboard +* S3 suspend and resume, wake using USB keyboard +* Headphone output, line out, internal speaker +* Wake on LAN +* Rebooting +* CMOS options & nvramcui + +Untested: +* mSATA slot. The SATA port needs to be enabled on devicetree + too, but I'm unable to test due to lack of hardware +* Line in, mic input +* MXM graphics card +* PS/2 mouse +* EHCI debug + +Not working: +* Mini-PCIe USB: I couldn't get it working on vendor BIOS either, so + maybe it just isn't present +* PS/2 keyboard wake from S3 +--- + .../hp/compaq_elite_8300_usdt/Kconfig | 43 ++++ + .../hp/compaq_elite_8300_usdt/Kconfig.name | 2 + + .../hp/compaq_elite_8300_usdt/Makefile.inc | 5 + + .../hp/compaq_elite_8300_usdt/acpi/ec.asl | 1 + + .../compaq_elite_8300_usdt/acpi/platform.asl | 10 + + .../compaq_elite_8300_usdt/acpi/superio.asl | 29 +++ + .../hp/compaq_elite_8300_usdt/acpi_tables.c | 12 ++ + .../hp/compaq_elite_8300_usdt/board_info.txt | 6 + + .../hp/compaq_elite_8300_usdt/cmos.default | 6 + + .../hp/compaq_elite_8300_usdt/cmos.layout | 73 +++++++ + .../hp/compaq_elite_8300_usdt/devicetree.cb | 172 ++++++++++++++++ + .../hp/compaq_elite_8300_usdt/dsdt.asl | 30 +++ + .../hp/compaq_elite_8300_usdt/early_init.c | 39 ++++ + .../compaq_elite_8300_usdt/gma-mainboard.ads | 19 ++ + .../hp/compaq_elite_8300_usdt/gpio.c | 191 ++++++++++++++++++ + .../hp/compaq_elite_8300_usdt/hda_verb.c | 33 +++ + .../hp/compaq_elite_8300_usdt/mainboard.c | 16 ++ + 17 files changed, 687 insertions(+) + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/Kconfig + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/Kconfig.name + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/Makefile.inc + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/acpi/ec.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/acpi/platform.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/acpi/superio.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/acpi_tables.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/board_info.txt + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/cmos.default + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/cmos.layout + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/devicetree.cb + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/dsdt.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/early_init.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/gma-mainboard.ads + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/gpio.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/hda_verb.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_usdt/mainboard.c + +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/Kconfig b/src/mainboard/hp/compaq_elite_8300_usdt/Kconfig +new file mode 100644 +index 0000000000..9450133065 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/Kconfig +@@ -0,0 +1,43 @@ ++if BOARD_HP_COMPAQ_ELITE_8300_USDT ++ ++config BOARD_SPECIFIC_OPTIONS ++ def_bool y ++ select BOARD_ROMSIZE_KB_16384 ++ select HAVE_ACPI_RESUME ++ select HAVE_ACPI_TABLES ++ select INTEL_INT15 ++ select MAINBOARD_HAS_LIBGFXINIT ++ select NORTHBRIDGE_INTEL_SANDYBRIDGE ++ select SERIRQ_CONTINUOUS_MODE ++ select SOUTHBRIDGE_INTEL_C216 ++ select USE_NATIVE_RAMINIT ++ select SUPERIO_NUVOTON_NPCD378 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select MAINBOARD_HAS_TPM1 ++ select MEMORY_MAPPED_TPM ++ select HAVE_CMOS_DEFAULT ++ select HAVE_OPTION_TABLE ++ ++config CBFS_SIZE ++ default 0x570000 ++ ++config MAINBOARD_DIR ++ string ++ default "hp/compaq_elite_8300_usdt" ++ ++config MAINBOARD_PART_NUMBER ++ string ++ default "HP Compaq Elite 8300 USDT" ++ ++config VGA_BIOS_ID ++ string ++ default "8086,0152" ++ ++config DRAM_RESET_GATE_GPIO ++ int ++ default 60 ++ ++config USBDEBUG_HCD_INDEX # FIXME: check this ++ int ++ default 2 ++endif +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/Kconfig.name b/src/mainboard/hp/compaq_elite_8300_usdt/Kconfig.name +new file mode 100644 +index 0000000000..030d8560ab +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/Kconfig.name +@@ -0,0 +1,2 @@ ++config BOARD_HP_COMPAQ_ELITE_8300_USDT ++ bool "Compaq Elite 8300 USDT" +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/Makefile.inc b/src/mainboard/hp/compaq_elite_8300_usdt/Makefile.inc +new file mode 100644 +index 0000000000..18391d8b18 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/Makefile.inc +@@ -0,0 +1,5 @@ ++bootblock-y += early_init.c ++bootblock-y += gpio.c ++romstage-y += early_init.c ++romstage-y += gpio.c ++ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/acpi/ec.asl b/src/mainboard/hp/compaq_elite_8300_usdt/acpi/ec.asl +new file mode 100644 +index 0000000000..73fa78ef14 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/acpi/ec.asl +@@ -0,0 +1 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/acpi/platform.asl b/src/mainboard/hp/compaq_elite_8300_usdt/acpi/platform.asl +new file mode 100644 +index 0000000000..aff432b6f4 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/acpi/platform.asl +@@ -0,0 +1,10 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++Method(_WAK, 1) ++{ ++ Return(Package() {0, 0}) ++} ++ ++Method(_PTS, 1) ++{ ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/acpi/superio.asl b/src/mainboard/hp/compaq_elite_8300_usdt/acpi/superio.asl +new file mode 100644 +index 0000000000..54f8e3fe95 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/acpi/superio.asl +@@ -0,0 +1,29 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++/* Copied over from compaq_8200_elite_sff/acpi/superio.asl */ ++ ++#include ++ ++Scope (\_GPE) ++{ ++ Method (_L0D, 0, NotSerialized) ++ { ++ Notify (\_SB.PCI0.EHC1, 0x02) ++ Notify (\_SB.PCI0.EHC2, 0x02) ++ //FIXME: Add GBE device ++ //Notify (\_SB.PCI0.GBE, 0x02) ++ } ++ ++ Method (_L09, 0, NotSerialized) ++ { ++ Notify (\_SB.PCI0.RP01, 0x02) ++ Notify (\_SB.PCI0.RP02, 0x02) ++ Notify (\_SB.PCI0.RP03, 0x02) ++ Notify (\_SB.PCI0.RP04, 0x02) ++ Notify (\_SB.PCI0.RP05, 0x02) ++ Notify (\_SB.PCI0.RP06, 0x02) ++ Notify (\_SB.PCI0.RP07, 0x02) ++ Notify (\_SB.PCI0.RP08, 0x02) ++ Notify (\_SB.PCI0.PEGP, 0x02) ++ } ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/acpi_tables.c b/src/mainboard/hp/compaq_elite_8300_usdt/acpi_tables.c +new file mode 100644 +index 0000000000..8f4f83b826 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/acpi_tables.c +@@ -0,0 +1,12 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++ ++void mainboard_fill_gnvs(struct global_nvs *gnvs) ++{ ++ /* Temperature at which OS will shutdown */ ++ gnvs->tcrt = 100; ++ /* Temperature at which OS will throttle CPU */ ++ gnvs->tpsv = 90; ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/board_info.txt b/src/mainboard/hp/compaq_elite_8300_usdt/board_info.txt +new file mode 100644 +index 0000000000..f47ea980b1 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/board_info.txt +@@ -0,0 +1,6 @@ ++Category: mini ++ROM protocol: SPI ++ROM socketed: n ++ROM package: SOIC-16 ++Flashrom support: y ++Release year: 2012 +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default +new file mode 100644 +index 0000000000..6f3cec735e +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default +@@ -0,0 +1,6 @@ ++boot_option=Fallback ++debug_level=Debug ++power_on_after_fail=Enable ++nmi=Enable ++sata_mode=AHCI ++gfx_uma_size=32M +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/cmos.layout b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.layout +new file mode 100644 +index 0000000000..bdc06faed6 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.layout +@@ -0,0 +1,73 @@ ++## SPDX-License-Identifier: GPL-2.0-only ++ ++# ----------------------------------------------------------------- ++entries ++ ++# ----------------------------------------------------------------- ++0 120 r 0 reserved_memory ++ ++# ----------------------------------------------------------------- ++# RTC_BOOT_BYTE (coreboot hardcoded) ++384 1 e 4 boot_option ++388 4 h 0 reboot_counter ++ ++# ----------------------------------------------------------------- ++# coreboot config options: console ++395 4 e 6 debug_level ++ ++# coreboot config options: southbridge ++408 1 e 1 nmi ++409 2 e 7 power_on_after_fail ++ ++421 1 e 9 sata_mode ++ ++# coreboot config options: northbridge ++432 3 e 11 gfx_uma_size ++ ++448 128 r 0 vbnv ++ ++# SandyBridge MRC Scrambler Seed values ++896 32 r 0 mrc_scrambler_seed ++928 32 r 0 mrc_scrambler_seed_s3 ++960 16 r 0 mrc_scrambler_seed_chk ++ ++# coreboot config options: check sums ++984 16 h 0 check_sum ++ ++# ----------------------------------------------------------------- ++ ++enumerations ++ ++#ID value text ++1 0 Disable ++1 1 Enable ++2 0 Enable ++2 1 Disable ++4 0 Fallback ++4 1 Normal ++6 0 Emergency ++6 1 Alert ++6 2 Critical ++6 3 Error ++6 4 Warning ++6 5 Notice ++6 6 Info ++6 7 Debug ++6 8 Spew ++7 0 Disable ++7 1 Enable ++7 2 Keep ++9 0 AHCI ++9 1 IDE ++11 0 32M ++11 1 64M ++11 2 96M ++11 3 128M ++11 4 160M ++11 5 192M ++11 6 224M ++ ++# ----------------------------------------------------------------- ++checksums ++ ++checksum 392 415 984 +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/devicetree.cb b/src/mainboard/hp/compaq_elite_8300_usdt/devicetree.cb +new file mode 100644 +index 0000000000..008429505e +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/devicetree.cb +@@ -0,0 +1,172 @@ ++chip northbridge/intel/sandybridge ++ register "gpu_dp_b_hotplug" = "4" ++ register "gpu_dp_c_hotplug" = "4" ++ register "gpu_dp_d_hotplug" = "0" ++ device domain 0x0 on ++ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH ++ register "docking_supported" = "0" ++ register "gen1_dec" = "0x00fc0a01" ++ register "gen2_dec" = "0x00fc0801" ++ register "gen3_dec" = "0x00000000" ++ register "gen4_dec" = "0x00000000" ++ register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" ++ register "pcie_port_coalesce" = "1" ++ register "sata_interface_speed_support" = "0x3" ++ register "sata_port_map" = "0x3" # 0x1: 2.5" slot ++ # 0x2: DVD ++ # 0x?: mSATA ++ register "spi_lvscc" = "0x2005" ++ register "spi_uvscc" = "0x2005" ++ register "superspeed_capable_ports" = "0x0000000f" ++ register "xhci_overcurrent_mapping" = "0x00000c03" ++ register "xhci_switchable_ports" = "0x0000000f" ++ device ref xhci on # USB 3.0 Controller ++ subsystemid 0x103c 0x3398 ++ end ++ device ref mei1 off # Management Engine Interface 1 ++ end ++ device ref mei2 off # Management Engine Interface 2 ++ end ++ device ref me_ide_r off # Management Engine IDE-R ++ end ++ device ref me_kt off # Management Engine KT ++ end ++ device ref gbe on # Intel Gigabit Ethernet ++ subsystemid 0x103c 0x3398 ++ end ++ device ref ehci2 on # USB2 EHCI #2 ++ subsystemid 0x103c 0x3398 ++ end ++ device ref hda on # High Definition Audio ++ subsystemid 0x103c 0x3398 ++ end ++ device ref pcie_rp1 on # Mini-PCIe WLAN ++ end ++ device ref pcie_rp2 off # PCIe Port #2 ++ end ++ device ref pcie_rp3 off # PCIe Port #3 ++ end ++ device ref pcie_rp4 off # PCIe Port #4 ++ end ++ device ref pcie_rp5 off # PCIe Port #5 ++ end ++ device ref pcie_rp6 off # PCIe Port #6 ++ end ++ device ref pcie_rp7 off # PCIe Port #7 ++ end ++ device ref pcie_rp8 off # PCIe Port #8 ++ end ++ device ref ehci1 on # USB2 EHCI #1 ++ subsystemid 0x103c 0x3398 ++ end ++ device ref pci_bridge on # PCI bridge ++ subsystemid 0x103c 0x3398 ++ end ++ device ref lpc on # LPC bridge ++ chip superio/common # Super I/O grabbed from 8200SFF devicetree ++ device pnp 2e.ff on # passes SIO base addr to SSDT gen ++ chip superio/nuvoton/npcd378 ++ device pnp 2e.0 off end # Floppy ++ device pnp 2e.1 off end # Parallel ++ device pnp 2e.2 off # COM1 ++ io 0x60 = 0x2f8 ++ irq 0x70 = 3 ++ end ++ device pnp 2e.3 on # COM2, IR ++ io 0x60 = 0x3f8 ++ irq 0x70 = 4 ++ end ++ device pnp 2e.4 on # LED control ++ io 0x60 = 0x600 ++ # IOBASE[0h] = bit0 LED red / green ++ # IOBASE[0h] = bit1-4 LED PWM duty cycle ++ # IOBASE[1h] = bit6 SWCC ++ ++ io 0x62 = 0x610 ++ # IOBASE [0h] = GPES ++ # IOBASE [1h] = GPEE ++ # IOBASE [4h:7h] = 32bit upcounter at 1Mhz ++ # IOBASE [8h:bh] = GPS ++ # IOBASE [ch:fh] = GPE ++ end ++ device pnp 2e.5 on # Mouse ++ irq 0x70 = 0xc ++ end ++ device pnp 2e.6 on # Keyboard ++ io 0x60 = 0x0060 ++ io 0x62 = 0x0064 ++ irq 0x70 = 0x01 ++ # serialice: Vendor writes: ++ drq 0xf0 = 0x40 ++ end ++ device pnp 2e.7 on # WDT ? ++ io 0x60 = 0x620 ++ end ++ device pnp 2e.8 on # HWM ++ io 0x60 = 0x800 ++ # IOBASE[0h:feh] HWM page ++ # IOBASE[ffh] bit0-bit3 page selector ++ ++ drq 0xf0 = 0x20 ++ drq 0xf1 = 0x01 ++ drq 0xf2 = 0x40 ++ drq 0xf3 = 0x01 ++ ++ drq 0xf4 = 0x66 ++ drq 0xf5 = 0x67 ++ drq 0xf6 = 0x66 ++ drq 0xf7 = 0x01 ++ end ++ device pnp 2e.f on # GPIO OD ? ++ drq 0xf1 = 0x97 ++ drq 0xf2 = 0x01 ++ drq 0xf5 = 0x08 ++ drq 0xfe = 0x80 ++ end ++ device pnp 2e.15 on # BUS ? ++ io 0x60 = 0x0680 ++ io 0x62 = 0x0690 ++ end ++ device pnp 2e.1c on # Suspend Control ? ++ io 0x60 = 0x640 ++ # writing to IOBASE[5h] ++ # 0x0: Power off ++ # 0x9: Power off and bricked until CMOS battery removed ++ end ++ device pnp 2e.1e on # GPIO ? ++ io 0x60 = 0x660 ++ drq 0xf4 = 0x01 ++ # skip the following, as it ++ # looks like remapped registers ++ #drq 0xf5 = 0x06 ++ #drq 0xf6 = 0x60 ++ #drq 0xfe = 0x03 ++ end ++ end ++ end ++ end ++ chip drivers/pc80/tpm ++ device pnp 4e.0 on end # TPM module ++ end ++ end ++ device ref sata1 on # SATA Controller 1 ++ subsystemid 0x103c 0x3398 ++ end ++ device ref smbus on # SMBus ++ subsystemid 0x103c 0x3398 ++ end ++ device ref sata2 off # SATA Controller 2 ++ end ++ device ref thermal off # Thermal ++ end ++ end ++ device ref host_bridge on # Host bridge Host bridge ++ subsystemid 0x103c 0x3398 ++ end ++ device ref peg10 on # PEG ++ end ++ device ref igd on # iGPU ++ subsystemid 0x103c 0x3398 ++ end ++ end ++end +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/dsdt.asl b/src/mainboard/hp/compaq_elite_8300_usdt/dsdt.asl +new file mode 100644 +index 0000000000..7d13c55b08 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/dsdt.asl +@@ -0,0 +1,30 @@ ++#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB ++#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++ ++#include ++ ++DefinitionBlock( ++ "dsdt.aml", ++ "DSDT", ++ ACPI_DSDT_REV_2, ++ OEM_ID, ++ ACPI_TABLE_CREATOR, ++ 0x20141018 /* OEM revision */ ++) ++{ ++ #include ++ #include "acpi/platform.asl" ++ #include ++ #include ++ #include ++ #include ++ ++ Device (\_SB.PCI0) ++ { ++ #include ++ #include ++ #include ++ } ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/early_init.c b/src/mainboard/hp/compaq_elite_8300_usdt/early_init.c +new file mode 100644 +index 0000000000..857c25dd19 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/early_init.c +@@ -0,0 +1,39 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++const struct southbridge_usb_port mainboard_usb_ports[] = { ++ { 1, 0, 0 }, ++ { 1, 0, 0 }, ++ { 1, 0, 1 }, ++ { 1, 0, 1 }, ++ { 1, 0, 2 }, ++ { 1, 0, 2 }, ++ { 1, 0, 3 }, ++ { 1, 0, 3 }, ++ { 1, 0, 4 }, ++ { 1, 0, 4 }, ++ { 1, 0, 6 }, ++ { 1, 0, 5 }, ++ { 1, 0, 5 }, ++ { 1, 0, 6 }, ++}; ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1408); ++ pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); ++} ++ ++void mainboard_get_spd(spd_raw_data *spd, bool id_only) ++{ ++ read_spd(&spd[3], 0x50, id_only); ++ read_spd(&spd[1], 0x52, id_only); ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/gma-mainboard.ads b/src/mainboard/hp/compaq_elite_8300_usdt/gma-mainboard.ads +new file mode 100644 +index 0000000000..74b50645e6 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/gma-mainboard.ads +@@ -0,0 +1,19 @@ ++-- SPDX-License-Identifier: GPL-2.0-or-later ++ ++with HW.GFX.GMA; ++with HW.GFX.GMA.Display_Probing; ++ ++use HW.GFX.GMA; ++use HW.GFX.GMA.Display_Probing; ++ ++private package GMA.Mainboard is ++ ++ ports : constant Port_List := ++ (DP1, ++ DP2, ++ HDMI1, ++ HDMI2, ++ Analog, ++ others => Disabled); ++ ++end GMA.Mainboard; +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/gpio.c b/src/mainboard/hp/compaq_elite_8300_usdt/gpio.c +new file mode 100644 +index 0000000000..2ae852ae51 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/gpio.c +@@ -0,0 +1,191 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_NATIVE, ++ .gpio3 = GPIO_MODE_NATIVE, ++ .gpio4 = GPIO_MODE_NATIVE, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_GPIO, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_NATIVE, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_NATIVE, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_NATIVE, ++ .gpio31 = GPIO_MODE_GPIO, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio11 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_OUTPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_OUTPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_OUTPUT, ++ .gpio29 = GPIO_DIR_OUTPUT, ++ .gpio31 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio15 = GPIO_LEVEL_LOW, ++ .gpio17 = GPIO_LEVEL_LOW, ++ .gpio28 = GPIO_LEVEL_LOW, ++ .gpio29 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio1 = GPIO_INVERT, ++ .gpio6 = GPIO_INVERT, ++ .gpio11 = GPIO_INVERT, ++ .gpio13 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_GPIO, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_GPIO, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_NATIVE, ++ .gpio46 = GPIO_MODE_GPIO, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_NATIVE, ++ .gpio52 = GPIO_MODE_NATIVE, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_NATIVE, ++ .gpio61 = GPIO_MODE_GPIO, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio32 = GPIO_DIR_INPUT, ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_INPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio43 = GPIO_DIR_INPUT, ++ .gpio46 = GPIO_DIR_INPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio61 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_GPIO, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_OUTPUT, ++ .gpio72 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++ .gpio71 = GPIO_LEVEL_LOW, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/hda_verb.c b/src/mainboard/hp/compaq_elite_8300_usdt/hda_verb.c +new file mode 100644 +index 0000000000..9c0525b015 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/hda_verb.c +@@ -0,0 +1,33 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x10ec0221, /* Codec Vendor / Device ID: Realtek */ ++ 0x103c3398, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x103c3398), ++ AZALIA_PIN_CFG(0, 0x12, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x14, 0x01014020), ++ AZALIA_PIN_CFG(0, 0x17, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x18, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x19, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x1a, 0x02a11c3f), ++ AZALIA_PIN_CFG(0, 0x1b, 0x01813c30), ++ AZALIA_PIN_CFG(0, 0x1d, 0x598301f0), ++ AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x21, 0x0221102f), ++ ++ 0x80862806, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x58560030), ++ ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/mainboard.c b/src/mainboard/hp/compaq_elite_8300_usdt/mainboard.c +new file mode 100644 +index 0000000000..8dbd95ef96 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_usdt/mainboard.c +@@ -0,0 +1,16 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++ ++static void mainboard_enable(struct device *dev) ++{ ++ install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE, ++ GMA_INT15_PANEL_FIT_DEFAULT, ++ GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); ++} ++ ++struct chip_operations mainboard_ops = { ++ .enable_dev = mainboard_enable, ++}; +-- +2.41.0 + -- cgit v1.2.1