From b549d1e5f3838575d3ff1f9c6c6fd595b49b1b3a Mon Sep 17 00:00:00 2001 From: Leah Rowe Date: Tue, 19 Nov 2024 22:45:43 +0000 Subject: u-boot x86 serial/ns16550: disable UART as needed U-Boot was hanging on hardware, but not Qemu. This is because on the machines tested, namely the X200 and E6230 laptops supported in Libreboot, the UART was disabled from coreboot. This U-Boot patch from Simon Glass works around the issue by silently disabling the UART when it isn't there. Instead, output is sent to the display and U-Boot no longer hangs. Signed-off-by: Leah Rowe --- ...ns16550-Allow-the-UART-to-be-silently-dis.patch | 116 +++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 config/u-boot/x86/patches/0001-x86-serial-ns16550-Allow-the-UART-to-be-silently-dis.patch (limited to 'config/u-boot/x86/patches') diff --git a/config/u-boot/x86/patches/0001-x86-serial-ns16550-Allow-the-UART-to-be-silently-dis.patch b/config/u-boot/x86/patches/0001-x86-serial-ns16550-Allow-the-UART-to-be-silently-dis.patch new file mode 100644 index 00000000..e3969d03 --- /dev/null +++ b/config/u-boot/x86/patches/0001-x86-serial-ns16550-Allow-the-UART-to-be-silently-dis.patch @@ -0,0 +1,116 @@ +From 13263cb35e8fc82f15aad2c1091f2b05342fbe0f Mon Sep 17 00:00:00 2001 +From: Simon Glass +Date: Wed, 1 Nov 2023 12:04:42 -0600 +Subject: [PATCH 1/1] x86: serial: ns16550: Allow the UART to be silently + disabled + +U-Boot normally requires a UART. When booting from coreboot it is +sometimes just not available, e.g. when no sysinfo or DBG2 information +is provided. + +In this case we need to continue running, since the display can be used. +Add a flag to disable serial for this case. + +This allows U-Boot to start up and operation from the display, instead +of hanging on start-up. + +This could perhaps be hidden behind a Kconfig option to reduce code +size. + +Signed-off-by: Simon Glass +--- + drivers/serial/ns16550.c | 17 +++++++++++++++-- + drivers/serial/serial_coreboot.c | 1 + + include/ns16550.h | 1 + + 3 files changed, 17 insertions(+), 2 deletions(-) + +diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c +index 6fcb5b523a..891124fc62 100644 +--- a/drivers/serial/ns16550.c ++++ b/drivers/serial/ns16550.c +@@ -384,6 +384,8 @@ static int ns16550_serial_putc(struct udevice *dev, const char ch) + { + struct ns16550 *const com_port = dev_get_priv(dev); + ++ if (com_port->plat->flags & NS16550_FLAG_DISABLE) ++ return 0; + if (!(serial_in(&com_port->lsr) & UART_LSR_THRE)) + return -EAGAIN; + serial_out(ch, &com_port->thr); +@@ -404,6 +406,9 @@ static int ns16550_serial_pending(struct udevice *dev, bool input) + { + struct ns16550 *const com_port = dev_get_priv(dev); + ++ if (com_port->plat->flags & NS16550_FLAG_DISABLE) ++ return 0; ++ + if (input) + return (serial_in(&com_port->lsr) & UART_LSR_DR) ? 1 : 0; + else +@@ -414,6 +419,9 @@ static int ns16550_serial_getc(struct udevice *dev) + { + struct ns16550 *const com_port = dev_get_priv(dev); + ++ if (com_port->plat->flags & NS16550_FLAG_DISABLE) ++ return 0; ++ + if (!(serial_in(&com_port->lsr) & UART_LSR_DR)) + return -EAGAIN; + +@@ -428,7 +436,8 @@ static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) + + clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate); + +- ns16550_setbrg(com_port, clock_divisor); ++ if (!(plat->flags & NS16550_FLAG_DISABLE)) ++ ns16550_setbrg(com_port, clock_divisor); + + return 0; + } +@@ -441,6 +450,9 @@ static int ns16550_serial_setconfig(struct udevice *dev, uint serial_config) + uint bits = SERIAL_GET_BITS(serial_config); + uint stop = SERIAL_GET_STOP(serial_config); + ++ if (com_port->plat->flags & NS16550_FLAG_DISABLE) ++ return 0; ++ + /* + * only parity config is implemented, check if other serial settings + * are the default one. +@@ -533,7 +545,8 @@ int ns16550_serial_probe(struct udevice *dev) + reset_deassert_bulk(&reset_bulk); + + com_port->plat = dev_get_plat(dev); +- ns16550_init(com_port, -1); ++ if (!(plat->flags & NS16550_FLAG_DISABLE)) ++ ns16550_init(com_port, -1); + + return 0; + } +diff --git a/drivers/serial/serial_coreboot.c b/drivers/serial/serial_coreboot.c +index b1f69f6998..a885809abd 100644 +--- a/drivers/serial/serial_coreboot.c ++++ b/drivers/serial/serial_coreboot.c +@@ -119,6 +119,7 @@ static int coreboot_of_to_plat(struct udevice *dev) + * there is no UART, which may panic. So stay silent and + * pray that the video console will work. + */ ++ plat->flags |= NS16550_FLAG_DISABLE; + log_debug("Cannot detect UART\n"); + } + +diff --git a/include/ns16550.h b/include/ns16550.h +index 7f48130008..3c4f3e7539 100644 +--- a/include/ns16550.h ++++ b/include/ns16550.h +@@ -52,6 +52,7 @@ enum ns16550_flags { + NS16550_FLAG_IO = 1 << 0, /* Use I/O access (else mem-mapped) */ + NS16550_FLAG_ENDIAN = 1 << 1, /* Use out_le/be_32() */ + NS16550_FLAG_BE = 1 << 2, /* Big-endian access (else little) */ ++ NS16550_FLAG_DISABLE = BIT(3), /* No output or input */ + }; + + /** +-- +2.39.5 + -- cgit v1.2.1