From 8245f0b3211812ac818adadd6526b0b39c63f3f0 Mon Sep 17 00:00:00 2001 From: Leah Rowe Date: Thu, 1 May 2025 14:30:14 +0100 Subject: Revert "seabios: bump to rev 9029a010, 4 March 2025" This reverts commit a08b8d94fc58fa195adb0261539509d8ddaf4799. From #libreboot IRC today: 07:02 ooh this is fun. seabios commit 8863cbbd15a73b03153553c562f5b1fb939ad4d7 (ahci: add controller reset) breaks ahci entirely on t420 07:05 cbmem console on that seabios commit has a timeout then "AHCI/0: device not ready" 07:07 AHCI works fine if i change config/seabios/default/target.cfg to use the immediate previous seabios commit (df9dd418b3b0e586cb208125094620fc7f90f23d) 07:07 works in grub payload either way though 07:31 here, `cbmem -c` after booting the broken rev: https://0x0.st/84oQ.log 07:31 compared to the working one https://0x0.st/84o1.log 07:33 i can't report to upstream myself *right now* but i figure you might want to know about this leah I have downloaded those logs locally for reference, so that an upstream report can be made to SeaBIOS. For the purposes of this Libreboot commit, the diff of the logs is as follows (diff -u broken.log working.log): Taking each diff line out of the log, the relevant entries seem to be: Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 +AHCI/0: Set transfer mode to UDMA-6 +Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0 +AHCI/0: registering: "AHCI/0: Netac SSD 128GB ATA-11 Hard-Disk (119 GiBytes)" -WARNING - Timeout at ahci_port_setup:477! -AHCI/0: device not ready (tf 0x80) -All threads complete. -2. Payload [memtest] +2. AHCI/0: Netac SSD 128GB ATA-11 Hard-Disk (119 GiBytes) +3. Payload [memtest] -Space available for UMB: c7000-eb800, f5880-f5ff0 -Returned 16777216 bytes of ZoneHigh +drive 0x000f5fa0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=250069680 +Space available for UMB: c7000-eb800, f5880-f5fa0 +Returned 16773120 bytes of ZoneHigh Therefore, the revision will be reverted back for now. It was only about 8 additional patches imported in the update anyway. --- .../0002-vgahooks-optionroms-implement-mxm-3.0-interrupts.patch | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'config/seabios/default/patches/0002-vgahooks-optionroms-implement-mxm-3.0-interrupts.patch') diff --git a/config/seabios/default/patches/0002-vgahooks-optionroms-implement-mxm-3.0-interrupts.patch b/config/seabios/default/patches/0002-vgahooks-optionroms-implement-mxm-3.0-interrupts.patch index 41800d29..f05a34c2 100644 --- a/config/seabios/default/patches/0002-vgahooks-optionroms-implement-mxm-3.0-interrupts.patch +++ b/config/seabios/default/patches/0002-vgahooks-optionroms-implement-mxm-3.0-interrupts.patch @@ -1,7 +1,7 @@ -From fd328d2eedadd43f6ceecc05c2d750a91a0e1200 Mon Sep 17 00:00:00 2001 +From 1e7c443d069ef817c4e699bd6675efff4ebddb86 Mon Sep 17 00:00:00 2001 From: Riku Viitanen Date: Sat, 10 Feb 2024 21:38:17 +0200 -Subject: [PATCH 2/3] vgahooks, optionroms: implement mxm 3.0 interrupts +Subject: [PATCH 2/2] vgahooks, optionroms: implement mxm 3.0 interrupts VGAROMs on MXM graphics cards need certain int15h functions present. @@ -184,5 +184,5 @@ index 00000000..f0c203af + +#endif // vgahooks.h -- -2.39.5 +2.43.0 -- cgit v1.2.1