From 0c8fa2011a4dbc1773d37e4adc4ff41e2431c639 Mon Sep 17 00:00:00 2001 From: Leah Rowe Date: Sun, 28 Jan 2024 02:09:32 +0000 Subject: update pico-serprog to Riku's new revision Riku introduced three new patches: * Add support for multiple chip selects. This allows you to control multiple chips from the same clip, on systems with dual flash setups, at least theoretically. * Enable pull-up on unused chip selects - pull them high so that chips you connect that to are deactivated while flashing the target chip. This could be used on thinkpad W541 for instance, where miso/mosi have 0ohm between them via the two flash ICs. You could pull the other chip select high. * Documentation for the above, in the pico-serprog readme. This goes in tandem with a patch from Riku, present in the recently integrated flashprog project, namely: commit ddb6d926783d4f9cbee04c7392718ed8f89daa0e Author: Riku Viitanen Date: Mon Jan 15 19:15:49 2024 +0200 serprog: Add support for multiple SPI chip selects This functionality will therefore be present in the next release of Libreboot. Signed-off-by: Leah Rowe --- config/git/pico-serprog | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'config/git/pico-serprog') diff --git a/config/git/pico-serprog b/config/git/pico-serprog index 172e620e..fcf34847 100644 --- a/config/git/pico-serprog +++ b/config/git/pico-serprog @@ -1,5 +1,5 @@ {pico-serprog}{ - rev: 0d49d6fcbe33a5af1bff599be6ff84ddda0bc3fe + rev: 377d9f2d528745158dd8af190bc19ed77ffa7778 loc: pico-serprog url: https://codeberg.org/libreboot/pico-serprog bkup_url: https://git.disroot.org/libreboot/pico-serprog -- cgit v1.2.1