From 4a7feba7cd40c902aa7cb621e257dbe2417de247 Mon Sep 17 00:00:00 2001 From: Ron Nazarov Date: Mon, 23 Mar 2026 17:47:08 +0000 Subject: supermicro x11ssh_f: Enable SATA hotplug See the commit message in the patch: Before this patch, hotplugging only worked to replace drives (if you tried to plug a drive into a SATA port that no drive was plugged in to at boot, it wouldn't be detected) and you'd have to manually rescan the bus (echo "- - -" > /sys/class/scsi_host/host*/scan) to make plugs/unplugs get detected by the operating system. Now, hotplugging works for all ports (tested and working on Supermicro X11SSH-LN4F) and there's no need to manually rescan (it sometimes takes a few seconds for unplugs to be detected, but plugs are detected instantly). Also submitted upstream as https://review.coreboot.org/c/coreboot/+/91824 --- ...ro-x11-lga1151-series-Enable-SATA-hotplug.patch | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 config/coreboot/default/patches/0051-mb-supermicro-x11-lga1151-series-Enable-SATA-hotplug.patch (limited to 'config/coreboot') diff --git a/config/coreboot/default/patches/0051-mb-supermicro-x11-lga1151-series-Enable-SATA-hotplug.patch b/config/coreboot/default/patches/0051-mb-supermicro-x11-lga1151-series-Enable-SATA-hotplug.patch new file mode 100644 index 00000000..58c1a1d9 --- /dev/null +++ b/config/coreboot/default/patches/0051-mb-supermicro-x11-lga1151-series-Enable-SATA-hotplug.patch @@ -0,0 +1,46 @@ +From 88519aed6c7f305f7f2319e335c1421137df7ce3 Mon Sep 17 00:00:00 2001 +From: Ron Nazarov +Date: Mon, 23 Mar 2026 17:04:03 +0000 +Subject: [PATCH] mb/supermicro/x11-lga1151-series: Enable SATA hotplug + +Before this patch, hotplugging only worked to replace drives (if you +tried to plug a drive into a SATA port that no drive was plugged in to +at boot, it wouldn't be detected) and you'd have to manually rescan +the bus (echo "- - -" > /sys/class/scsi_host/host*/scan) to make +plugs/unplugs get detected by the operating system. + +Now, hotplugging works for all ports (tested and working on Supermicro +X11SSH-LN4F) and there's no need to manually rescan (it sometimes +takes a few seconds for unplugs to be detected, but plugs are detected +instantly). + +Change-Id: Id978a047697795ea657048fb6dc6665736c293f9 +Signed-off-by: Ron Nazarov +--- + .../supermicro/x11-lga1151-series/devicetree.cb | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +diff --git a/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb +index fbf896c6ae..d25288420f 100644 +--- a/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb ++++ b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb +@@ -28,6 +28,16 @@ chip soc/intel/skylake + [6] = 1, + [7] = 1, + }" ++ register "SataPortsHotPlug" = "{ ++ [0] = 1, ++ [1] = 1, ++ [2] = 1, ++ [3] = 1, ++ [4] = 1, ++ [5] = 1, ++ [6] = 1, ++ [7] = 1, ++ }" + end + device ref lpc_espi on + register "serirq_mode" = "SERIRQ_CONTINUOUS" +-- +2.52.0 + -- cgit v1.2.1