From 14b4838d49556eb544c0f6a96d72128c3480ec2c Mon Sep 17 00:00:00 2001 From: Leah Rowe Date: Fri, 1 Nov 2024 15:59:30 +0000 Subject: coreboot/default: Re-base all patches There were a lot of unnecessary patches, such as the VRAM patches; as Nicholas Chin has explained to me, the drivers for these machines will just allocate what RAM they want anyway, so in a lot of cases the extra allocated Video RAM simply reduces the total amount of memory for other uses. In general, we have a lot of patches that have existed for years. A much more aggressive sweep will be done in the next major audit, especially when the revisions are updated again. Signed-off-by: Leah Rowe --- ...01-add-c3-and-clockgen-to-apple-macbook21.patch | 68 + ...ok21-Set-default-VRAM-to-64MiB-instead-of.patch | 23 - ...02-add-c3-and-clockgen-to-apple-macbook21.patch | 68 - .../0002-lenovo-t400-Enable-all-SATA-ports.patch | 34 + ...230-set-me_state-Disabled-in-cmos.default.patch | 37 + ...64MiB-Video-RAM-changed-to-default-previo.patch | 23 - ...make-64MiB-VRAM-the-default-in-cmos.defau.patch | 22 - ..._state-Disabled-on-all-cmos.default-files.patch | 124 ++ ...o-t400-set-VRAM-to-256MiB-VRAM-by-default.patch | 23 - ...-ifdtool-add-nuke-flag-all-0xFF-on-region.patch | 205 +++ ...lenovo-x200-set-VRAM-to-256MiB-by-default.patch | 23 - ...00-Enable-01.0-device-in-devicetree-for-d.patch | 28 + ...ing-for-coreboot-images-built-without-a-p.patch | 39 + ...a-g41m-es2l-set-VRAM-to-256MiB-by-default.patch | 23 - ...er-g43t-am3-set-VRAM-to-256MiB-by-default.patch | 23 - ...008-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch | 430 ++++++ .../0009-lenovo-t400-Enable-all-SATA-ports.patch | 34 - ...009-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch | 430 ++++++ ...d-Lenovo-X230-patch-gfx_uma_size-224M-by-.patch | 22 - ...0-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch | 435 ++++++ ...230-set-me_state-Disabled-in-cmos.default.patch | 38 - ...1-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch | 449 ++++++ ...2-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch | 442 ++++++ ..._state-Disabled-on-all-cmos.default-files.patch | 124 -- ...3-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch | 442 ++++++ ...-ifdtool-add-nuke-flag-all-0xFF-on-region.patch | 205 --- ...ep-on-x200-t400-Revert-cpu-intel-model_10.patch | 47 - ...4-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch | 435 ++++++ ...5-type-CPUs-don-t-enable-alternative-SMRR.patch | 173 --- ...5-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch | 438 ++++++ ...016-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch | 436 ++++++ ...00-Enable-01.0-device-in-devicetree-for-d.patch | 28 - ...ing-for-coreboot-images-built-without-a-p.patch | 39 - ...017-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch | 440 ++++++ ...CK-Disable-coreboot-related-BL31-features.patch | 28 + ...018-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch | 430 ------ ...-dell-e6430-use-ME-Soft-Temporary-Disable.patch | 30 + ...019-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch | 430 ------ ...0-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch | 435 ------ ...0020-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch | 872 +++++++++++ ...1-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch | 449 ------ ...intel-haswell-make-IOMMU-a-runtime-option.patch | 292 ++++ ...ll-optiplex_9020-Disable-IOMMU-by-default.patch | 29 + ...2-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch | 442 ------ ...3-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch | 442 ------ ...well-Fully-disable-iGPU-when-dGPU-is-used.patch | 51 + ...c-dell-mec5035-Replace-defines-with-enums.patch | 91 ++ ...4-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch | 435 ------ ...c-dell-mec5035-Add-S3-suspend-SMI-handler.patch | 147 ++ ...5-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch | 438 ------ ...026-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch | 436 ------ ...ell-lock-policy-regs-when-disabling-IOMMU.patch | 55 + ...027-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch | 440 ------ ...0027-nb-intel-gm45-Make-DDR2-raminit-work.patch | 223 +++ ...CK-Disable-coreboot-related-BL31-features.patch | 28 - ...Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch | 240 +++ ...00-Use-100-MHz-reference-clock-for-displa.patch | 52 + .../0029-use-own-mirror-for-acpica-files.patch | 29 - ...k-up-vram-allocation-on-more-intel-boards.patch | 142 -- .../patches/0030-haswell-NRI-Initialise-MPLL.patch | 348 +++++ ...-dell-e6430-use-ME-Soft-Temporary-Disable.patch | 30 - ...haswell-NRI-Post-process-selected-timings.patch | 249 +++ ...haswell-NRI-Configure-initial-MC-settings.patch | 1594 ++++++++++++++++++++ ...2-use-mirrorservice.org-for-gcc-downloads.patch | 36 - ...swell-NRI-Add-timings-refresh-programming.patch | 541 +++++++ ...0033-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch | 872 ----------- .../0034-haswell-NRI-Program-memory-map.patch | 263 ++++ ...intel-haswell-make-IOMMU-a-runtime-option.patch | 292 ---- ...ll-optiplex_9020-Disable-IOMMU-by-default.patch | 29 - ...haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch | 1036 +++++++++++++ .../0036-haswell-NRI-Add-pre-training-steps.patch | 392 +++++ ...well-Fully-disable-iGPU-when-dGPU-is-used.patch | 51 - ...c-dell-mec5035-Replace-defines-with-enums.patch | 91 -- ...037-haswell-NRI-Add-REUT-I-O-test-library.patch | 1130 ++++++++++++++ ...c-dell-mec5035-Add-S3-suspend-SMI-handler.patch | 147 -- ...38-haswell-NRI-Add-range-tracking-library.patch | 222 +++ ...haswell-NRI-Add-library-to-change-margins.patch | 294 ++++ ...ell-lock-policy-regs-when-disabling-IOMMU.patch | 55 - .../0040-haswell-NRI-Add-RcvEn-training.patch | 708 +++++++++ ...0040-nb-intel-gm45-Make-DDR2-raminit-work.patch | 223 --- ...aswell-NRI-Add-function-to-change-margins.patch | 272 ++++ ...Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch | 240 --- .../0042-haswell-NRI-Add-read-MPR-training.patch | 332 ++++ ...00-Use-100-MHz-reference-clock-for-displa.patch | 52 - .../0043-haswell-NRI-Add-write-leveling.patch | 689 +++++++++ .../patches/0043-haswell-NRI-Initialise-MPLL.patch | 348 ----- .../0044-haswell-NRI-Add-final-raminit-steps.patch | 570 +++++++ ...haswell-NRI-Post-process-selected-timings.patch | 249 --- ...0045-Haswell-NRI-Implement-fast-boot-path.patch | 722 +++++++++ ...haswell-NRI-Configure-initial-MC-settings.patch | 1594 -------------------- ...swell-NRI-Add-timings-refresh-programming.patch | 541 ------- ...ll-NRI-Do-sense-amplifier-offset-training.patch | 476 ++++++ .../0047-haswell-NRI-Program-memory-map.patch | 263 ---- ...047-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch | 52 + ...haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch | 1036 ------------- ...0048-mb-dell-Convert-E6400-into-a-variant.patch | 243 +++ .../0049-haswell-NRI-Add-pre-training-steps.patch | 392 ----- ...-mb-dell-gm45_latitudes-Add-E4300-variant.patch | 332 ++++ ...050-haswell-NRI-Add-REUT-I-O-test-library.patch | 1130 -------------- ...ell-Add-S3-SMI-handler-for-Dell-Latitudes.patch | 70 + ...-mec5035-Route-power-button-event-to-host.patch | 92 ++ ...51-haswell-NRI-Add-range-tracking-library.patch | 222 --- ...haswell-NRI-Add-library-to-change-margins.patch | 294 ---- .../0053-haswell-NRI-Add-RcvEn-training.patch | 708 --------- ...aswell-NRI-Add-function-to-change-margins.patch | 272 ---- .../0055-haswell-NRI-Add-read-MPR-training.patch | 332 ---- .../0056-haswell-NRI-Add-write-leveling.patch | 689 --------- .../0057-haswell-NRI-Add-final-raminit-steps.patch | 570 ------- ...0058-Haswell-NRI-Implement-fast-boot-path.patch | 722 --------- ...ll-NRI-Do-sense-amplifier-offset-training.patch | 476 ------ ...060-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch | 52 - ...0062-mb-dell-Convert-E6400-into-a-variant.patch | 243 --- ...-mb-dell-gm45_latitudes-Add-E4300-variant.patch | 332 ---- ...ell-Add-S3-SMI-handler-for-Dell-Latitudes.patch | 70 - ...-mec5035-Route-power-button-event-to-host.patch | 92 -- 115 files changed, 17649 insertions(+), 18259 deletions(-) create mode 100644 config/coreboot/default/patches/0001-add-c3-and-clockgen-to-apple-macbook21.patch delete mode 100644 config/coreboot/default/patches/0001-apple-macbook21-Set-default-VRAM-to-64MiB-instead-of.patch delete mode 100644 config/coreboot/default/patches/0002-add-c3-and-clockgen-to-apple-macbook21.patch create mode 100644 config/coreboot/default/patches/0002-lenovo-t400-Enable-all-SATA-ports.patch create mode 100644 config/coreboot/default/patches/0003-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch delete mode 100644 config/coreboot/default/patches/0003-lenovo-x60-64MiB-Video-RAM-changed-to-default-previo.patch delete mode 100644 config/coreboot/default/patches/0004-lenovo-t60-make-64MiB-VRAM-the-default-in-cmos.defau.patch create mode 100644 config/coreboot/default/patches/0004-set-me_state-Disabled-on-all-cmos.default-files.patch delete mode 100644 config/coreboot/default/patches/0005-lenovo-t400-set-VRAM-to-256MiB-VRAM-by-default.patch create mode 100644 config/coreboot/default/patches/0005-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch delete mode 100644 config/coreboot/default/patches/0006-lenovo-x200-set-VRAM-to-256MiB-by-default.patch create mode 100644 config/coreboot/default/patches/0006-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch create mode 100644 config/coreboot/default/patches/0007-Remove-warning-for-coreboot-images-built-without-a-p.patch delete mode 100644 config/coreboot/default/patches/0007-gigabyte-ga-g41m-es2l-set-VRAM-to-256MiB-by-default.patch delete mode 100644 config/coreboot/default/patches/0008-acer-g43t-am3-set-VRAM-to-256MiB-by-default.patch create mode 100644 config/coreboot/default/patches/0008-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0009-lenovo-t400-Enable-all-SATA-ports.patch create mode 100644 config/coreboot/default/patches/0009-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0010-coreboot-Add-Lenovo-X230-patch-gfx_uma_size-224M-by-.patch create mode 100644 config/coreboot/default/patches/0010-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0011-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch create mode 100644 config/coreboot/default/patches/0011-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch create mode 100644 config/coreboot/default/patches/0012-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0012-set-me_state-Disabled-on-all-cmos.default-files.patch create mode 100644 config/coreboot/default/patches/0013-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0013-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch delete mode 100644 config/coreboot/default/patches/0014-fix-speedstep-on-x200-t400-Revert-cpu-intel-model_10.patch create mode 100644 config/coreboot/default/patches/0014-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0015-GM45-type-CPUs-don-t-enable-alternative-SMRR.patch create mode 100644 config/coreboot/default/patches/0015-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch create mode 100644 config/coreboot/default/patches/0016-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0016-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch delete mode 100644 config/coreboot/default/patches/0017-Remove-warning-for-coreboot-images-built-without-a-p.patch create mode 100644 config/coreboot/default/patches/0017-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch create mode 100644 config/coreboot/default/patches/0018-HACK-Disable-coreboot-related-BL31-features.patch delete mode 100644 config/coreboot/default/patches/0018-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch create mode 100644 config/coreboot/default/patches/0019-dell-e6430-use-ME-Soft-Temporary-Disable.patch delete mode 100644 config/coreboot/default/patches/0019-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0020-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch create mode 100644 config/coreboot/default/patches/0020-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch delete mode 100644 config/coreboot/default/patches/0021-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch create mode 100644 config/coreboot/default/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch create mode 100644 config/coreboot/default/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch delete mode 100644 config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch create mode 100644 config/coreboot/default/patches/0023-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch create mode 100644 config/coreboot/default/patches/0024-ec-dell-mec5035-Replace-defines-with-enums.patch delete mode 100644 config/coreboot/default/patches/0024-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch create mode 100644 config/coreboot/default/patches/0025-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch delete mode 100644 config/coreboot/default/patches/0025-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch delete mode 100644 config/coreboot/default/patches/0026-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch create mode 100644 config/coreboot/default/patches/0026-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch delete mode 100644 config/coreboot/default/patches/0027-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch create mode 100644 config/coreboot/default/patches/0027-nb-intel-gm45-Make-DDR2-raminit-work.patch delete mode 100644 config/coreboot/default/patches/0028-HACK-Disable-coreboot-related-BL31-features.patch create mode 100644 config/coreboot/default/patches/0028-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch create mode 100644 config/coreboot/default/patches/0029-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch delete mode 100644 config/coreboot/default/patches/0029-use-own-mirror-for-acpica-files.patch delete mode 100644 config/coreboot/default/patches/0030-crank-up-vram-allocation-on-more-intel-boards.patch create mode 100644 config/coreboot/default/patches/0030-haswell-NRI-Initialise-MPLL.patch delete mode 100644 config/coreboot/default/patches/0031-dell-e6430-use-ME-Soft-Temporary-Disable.patch create mode 100644 config/coreboot/default/patches/0031-haswell-NRI-Post-process-selected-timings.patch create mode 100644 config/coreboot/default/patches/0032-haswell-NRI-Configure-initial-MC-settings.patch delete mode 100644 config/coreboot/default/patches/0032-use-mirrorservice.org-for-gcc-downloads.patch create mode 100644 config/coreboot/default/patches/0033-haswell-NRI-Add-timings-refresh-programming.patch delete mode 100644 config/coreboot/default/patches/0033-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch create mode 100644 config/coreboot/default/patches/0034-haswell-NRI-Program-memory-map.patch delete mode 100644 config/coreboot/default/patches/0034-nb-intel-haswell-make-IOMMU-a-runtime-option.patch delete mode 100644 config/coreboot/default/patches/0035-dell-optiplex_9020-Disable-IOMMU-by-default.patch create mode 100644 config/coreboot/default/patches/0035-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch create mode 100644 config/coreboot/default/patches/0036-haswell-NRI-Add-pre-training-steps.patch delete mode 100644 config/coreboot/default/patches/0036-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch delete mode 100644 config/coreboot/default/patches/0037-ec-dell-mec5035-Replace-defines-with-enums.patch create mode 100644 config/coreboot/default/patches/0037-haswell-NRI-Add-REUT-I-O-test-library.patch delete mode 100644 config/coreboot/default/patches/0038-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch create mode 100644 config/coreboot/default/patches/0038-haswell-NRI-Add-range-tracking-library.patch create mode 100644 config/coreboot/default/patches/0039-haswell-NRI-Add-library-to-change-margins.patch delete mode 100644 config/coreboot/default/patches/0039-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch create mode 100644 config/coreboot/default/patches/0040-haswell-NRI-Add-RcvEn-training.patch delete mode 100644 config/coreboot/default/patches/0040-nb-intel-gm45-Make-DDR2-raminit-work.patch create mode 100644 config/coreboot/default/patches/0041-haswell-NRI-Add-function-to-change-margins.patch delete mode 100644 config/coreboot/default/patches/0041-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch create mode 100644 config/coreboot/default/patches/0042-haswell-NRI-Add-read-MPR-training.patch delete mode 100644 config/coreboot/default/patches/0042-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch create mode 100644 config/coreboot/default/patches/0043-haswell-NRI-Add-write-leveling.patch delete mode 100644 config/coreboot/default/patches/0043-haswell-NRI-Initialise-MPLL.patch create mode 100644 config/coreboot/default/patches/0044-haswell-NRI-Add-final-raminit-steps.patch delete mode 100644 config/coreboot/default/patches/0044-haswell-NRI-Post-process-selected-timings.patch create mode 100644 config/coreboot/default/patches/0045-Haswell-NRI-Implement-fast-boot-path.patch delete mode 100644 config/coreboot/default/patches/0045-haswell-NRI-Configure-initial-MC-settings.patch delete mode 100644 config/coreboot/default/patches/0046-haswell-NRI-Add-timings-refresh-programming.patch create mode 100644 config/coreboot/default/patches/0046-haswell-NRI-Do-sense-amplifier-offset-training.patch delete mode 100644 config/coreboot/default/patches/0047-haswell-NRI-Program-memory-map.patch create mode 100644 config/coreboot/default/patches/0047-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch delete mode 100644 config/coreboot/default/patches/0048-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch create mode 100644 config/coreboot/default/patches/0048-mb-dell-Convert-E6400-into-a-variant.patch delete mode 100644 config/coreboot/default/patches/0049-haswell-NRI-Add-pre-training-steps.patch create mode 100644 config/coreboot/default/patches/0049-mb-dell-gm45_latitudes-Add-E4300-variant.patch delete mode 100644 config/coreboot/default/patches/0050-haswell-NRI-Add-REUT-I-O-test-library.patch create mode 100644 config/coreboot/default/patches/0050-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch create mode 100644 config/coreboot/default/patches/0051-ec-dell-mec5035-Route-power-button-event-to-host.patch delete mode 100644 config/coreboot/default/patches/0051-haswell-NRI-Add-range-tracking-library.patch delete mode 100644 config/coreboot/default/patches/0052-haswell-NRI-Add-library-to-change-margins.patch delete mode 100644 config/coreboot/default/patches/0053-haswell-NRI-Add-RcvEn-training.patch delete mode 100644 config/coreboot/default/patches/0054-haswell-NRI-Add-function-to-change-margins.patch delete mode 100644 config/coreboot/default/patches/0055-haswell-NRI-Add-read-MPR-training.patch delete mode 100644 config/coreboot/default/patches/0056-haswell-NRI-Add-write-leveling.patch delete mode 100644 config/coreboot/default/patches/0057-haswell-NRI-Add-final-raminit-steps.patch delete mode 100644 config/coreboot/default/patches/0058-Haswell-NRI-Implement-fast-boot-path.patch delete mode 100644 config/coreboot/default/patches/0059-haswell-NRI-Do-sense-amplifier-offset-training.patch delete mode 100644 config/coreboot/default/patches/0060-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch delete mode 100644 config/coreboot/default/patches/0062-mb-dell-Convert-E6400-into-a-variant.patch delete mode 100644 config/coreboot/default/patches/0063-mb-dell-gm45_latitudes-Add-E4300-variant.patch delete mode 100644 config/coreboot/default/patches/0066-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch delete mode 100644 config/coreboot/default/patches/0067-ec-dell-mec5035-Route-power-button-event-to-host.patch (limited to 'config/coreboot/default/patches') diff --git a/config/coreboot/default/patches/0001-add-c3-and-clockgen-to-apple-macbook21.patch b/config/coreboot/default/patches/0001-add-c3-and-clockgen-to-apple-macbook21.patch new file mode 100644 index 00000000..da4ab420 --- /dev/null +++ b/config/coreboot/default/patches/0001-add-c3-and-clockgen-to-apple-macbook21.patch @@ -0,0 +1,68 @@ +From f625e31ee3abb867e775ab0cb724550825699c36 Mon Sep 17 00:00:00 2001 +From: Vitali64 <5405891-vitali64yt@users.noreply.gitlab.com> +Date: Wed, 27 Oct 2021 13:36:01 +0200 +Subject: [PATCH 01/51] add c3 and clockgen to apple/macbook21 + +--- + src/mainboard/apple/macbook21/Kconfig | 1 + + src/mainboard/apple/macbook21/cstates.c | 13 +++++++++++++ + src/mainboard/apple/macbook21/devicetree.cb | 6 ++++++ + 3 files changed, 20 insertions(+) + +diff --git a/src/mainboard/apple/macbook21/Kconfig b/src/mainboard/apple/macbook21/Kconfig +index 330d8efae2..cf10343554 100644 +--- a/src/mainboard/apple/macbook21/Kconfig ++++ b/src/mainboard/apple/macbook21/Kconfig +@@ -18,6 +18,7 @@ config BOARD_SPECIFIC_OPTIONS + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select I945_LVDS ++ select DRIVERS_I2C_CK505 + + config MAINBOARD_DIR + default "apple/macbook21" +diff --git a/src/mainboard/apple/macbook21/cstates.c b/src/mainboard/apple/macbook21/cstates.c +index 13d06f0839..88b8669c61 100644 +--- a/src/mainboard/apple/macbook21/cstates.c ++++ b/src/mainboard/apple/macbook21/cstates.c +@@ -29,6 +29,19 @@ static const acpi_cstate_t cst_entries[] = { + .addrh = 0, + } + }, ++ { ++ .ctype = 3, ++ .latency = 17, ++ .power = 250, ++ .resource = { ++ .space_id = ACPI_ADDRESS_SPACE_FIXED, ++ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, ++ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, ++ .access_size = ACPI_ACCESS_SIZE_UNDEFINED, ++ .addrl = 0x20, ++ .addrh = 0, ++ } ++ }, + }; + + int get_cst_entries(const acpi_cstate_t **entries) +diff --git a/src/mainboard/apple/macbook21/devicetree.cb b/src/mainboard/apple/macbook21/devicetree.cb +index fd86e939b9..263fbabcd1 100644 +--- a/src/mainboard/apple/macbook21/devicetree.cb ++++ b/src/mainboard/apple/macbook21/devicetree.cb +@@ -100,7 +100,13 @@ chip northbridge/intel/i945 + end + device pci 1f.3 on # SMBUS + subsystemid 0x8086 0x7270 ++ chip drivers/i2c/ck505 ++ register "mask" = "{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }" ++ register "regs" = "{ 0x77, 0x77, 0x2d, 0x00, 0x21, 0x10, 0x3b, 0x06, 0x07, 0x0f, 0xf0, 0x01, 0x1e, 0x7f, 0x80, 0x80, 0x10, 0x08, 0x04, 0x01 }" ++ device i2c 69 on end ++ end + end ++ + end + end + end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0001-apple-macbook21-Set-default-VRAM-to-64MiB-instead-of.patch b/config/coreboot/default/patches/0001-apple-macbook21-Set-default-VRAM-to-64MiB-instead-of.patch deleted file mode 100644 index 1876db23..00000000 --- a/config/coreboot/default/patches/0001-apple-macbook21-Set-default-VRAM-to-64MiB-instead-of.patch +++ /dev/null @@ -1,23 +0,0 @@ -From e8eb37e87abfdf6d2bcf60cb15d35650fcfa6665 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Fri, 19 Mar 2021 05:54:58 +0000 -Subject: [PATCH 01/65] apple/macbook21: Set default VRAM to 64MiB instead of - 8MiB - ---- - src/mainboard/apple/macbook21/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/apple/macbook21/cmos.default b/src/mainboard/apple/macbook21/cmos.default -index b744b11cda..9749e26547 100644 ---- a/src/mainboard/apple/macbook21/cmos.default -+++ b/src/mainboard/apple/macbook21/cmos.default -@@ -7,4 +7,4 @@ boot_devices='' - boot_default=0x40 - cmos_defaults_loaded=Yes - lpt=Enable --gfx_uma_size=8M -+gfx_uma_size=64M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0002-add-c3-and-clockgen-to-apple-macbook21.patch b/config/coreboot/default/patches/0002-add-c3-and-clockgen-to-apple-macbook21.patch deleted file mode 100644 index b4ffe7fc..00000000 --- a/config/coreboot/default/patches/0002-add-c3-and-clockgen-to-apple-macbook21.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 2533ed49003c470a8dbfbf17f6c6a5ef0672c2e2 Mon Sep 17 00:00:00 2001 -From: Vitali64 <5405891-vitali64yt@users.noreply.gitlab.com> -Date: Wed, 27 Oct 2021 13:36:01 +0200 -Subject: [PATCH 02/65] add c3 and clockgen to apple/macbook21 - ---- - src/mainboard/apple/macbook21/Kconfig | 1 + - src/mainboard/apple/macbook21/cstates.c | 13 +++++++++++++ - src/mainboard/apple/macbook21/devicetree.cb | 6 ++++++ - 3 files changed, 20 insertions(+) - -diff --git a/src/mainboard/apple/macbook21/Kconfig b/src/mainboard/apple/macbook21/Kconfig -index 330d8efae2..cf10343554 100644 ---- a/src/mainboard/apple/macbook21/Kconfig -+++ b/src/mainboard/apple/macbook21/Kconfig -@@ -18,6 +18,7 @@ config BOARD_SPECIFIC_OPTIONS - select HAVE_ACPI_TABLES - select HAVE_ACPI_RESUME - select I945_LVDS -+ select DRIVERS_I2C_CK505 - - config MAINBOARD_DIR - default "apple/macbook21" -diff --git a/src/mainboard/apple/macbook21/cstates.c b/src/mainboard/apple/macbook21/cstates.c -index 13d06f0839..88b8669c61 100644 ---- a/src/mainboard/apple/macbook21/cstates.c -+++ b/src/mainboard/apple/macbook21/cstates.c -@@ -29,6 +29,19 @@ static const acpi_cstate_t cst_entries[] = { - .addrh = 0, - } - }, -+ { -+ .ctype = 3, -+ .latency = 17, -+ .power = 250, -+ .resource = { -+ .space_id = ACPI_ADDRESS_SPACE_FIXED, -+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL, -+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT, -+ .access_size = ACPI_ACCESS_SIZE_UNDEFINED, -+ .addrl = 0x20, -+ .addrh = 0, -+ } -+ }, - }; - - int get_cst_entries(const acpi_cstate_t **entries) -diff --git a/src/mainboard/apple/macbook21/devicetree.cb b/src/mainboard/apple/macbook21/devicetree.cb -index fd86e939b9..263fbabcd1 100644 ---- a/src/mainboard/apple/macbook21/devicetree.cb -+++ b/src/mainboard/apple/macbook21/devicetree.cb -@@ -100,7 +100,13 @@ chip northbridge/intel/i945 - end - device pci 1f.3 on # SMBUS - subsystemid 0x8086 0x7270 -+ chip drivers/i2c/ck505 -+ register "mask" = "{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }" -+ register "regs" = "{ 0x77, 0x77, 0x2d, 0x00, 0x21, 0x10, 0x3b, 0x06, 0x07, 0x0f, 0xf0, 0x01, 0x1e, 0x7f, 0x80, 0x80, 0x10, 0x08, 0x04, 0x01 }" -+ device i2c 69 on end -+ end - end -+ - end - end - end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0002-lenovo-t400-Enable-all-SATA-ports.patch b/config/coreboot/default/patches/0002-lenovo-t400-Enable-all-SATA-ports.patch new file mode 100644 index 00000000..ee605e58 --- /dev/null +++ b/config/coreboot/default/patches/0002-lenovo-t400-Enable-all-SATA-ports.patch @@ -0,0 +1,34 @@ +From 8821f229d4fe48153ec7a45e0e04c3b2a3cd8c7c Mon Sep 17 00:00:00 2001 +From: persmule +Date: Sun, 31 Oct 2021 23:33:26 +0000 +Subject: [PATCH 02/51] lenovo/t400: Enable all SATA ports + +There are 2 SATA ports on the chassis of t400(s), but at least one dock for +t400 contains a port for (P/S)ATA device, and t400s has a eSATA port on its +chassis, and another one on its dock. + +They have to be unmasked via device tree to use. + +This patch unmasked all SATA ports found within t400s with factory firmware. +--- + src/mainboard/lenovo/t400/devicetree.cb | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/src/mainboard/lenovo/t400/devicetree.cb b/src/mainboard/lenovo/t400/devicetree.cb +index 259c3e1b21..3d007533a4 100644 +--- a/src/mainboard/lenovo/t400/devicetree.cb ++++ b/src/mainboard/lenovo/t400/devicetree.cb +@@ -46,8 +46,8 @@ chip northbridge/intel/gm45 + register "gpe0_en" = "0x01000000" + register "gpi1_routing" = "2" + +- # Set AHCI mode, enable ports 1 and 2. +- register "sata_port_map" = "0x03" ++ # Set AHCI mode, enable ports 1, 2, 5 and 6. ++ register "sata_port_map" = "0x33" + register "sata_clock_request" = "0" + register "sata_traffic_monitor" = "0" + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0003-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch b/config/coreboot/default/patches/0003-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch new file mode 100644 index 00000000..a4b430fe --- /dev/null +++ b/config/coreboot/default/patches/0003-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch @@ -0,0 +1,37 @@ +From 0298639b6e80c8950fbb4484180b7195883ab8c1 Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Mon, 3 Jan 2022 19:06:22 +0000 +Subject: [PATCH 03/51] lenovo/x230: set me_state=Disabled in cmos.default + +I only recently found out about this. It's possible to use me_cleaner to +do the same thing, but some people might just flash coreboot and not do +anything with the ME region + +With this change, the ME is set to disabled. It's my understanding that this +will accomplish more or less the same thing as me_cleaner, without actually +using that. Of course, I still recommend using me_cleaner + +I saw this when I audited coreboot's git history, and saw this: + +commit 833e9bad4762e0dca6c867d3a18dbaf6d5166be8 +Author: Evgeny Zinoviev +Date: Thu Nov 21 21:47:31 2019 +0300 + + sb/intel/bd82x6x: Support ME Soft Temporary Disable Mode +--- + src/mainboard/lenovo/x230/cmos.default | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/mainboard/lenovo/x230/cmos.default b/src/mainboard/lenovo/x230/cmos.default +index 732e214b32..8454f0eac0 100644 +--- a/src/mainboard/lenovo/x230/cmos.default ++++ b/src/mainboard/lenovo/x230/cmos.default +@@ -17,4 +17,4 @@ trackpoint=Enable + backlight=Both + usb_always_on=Disable + f1_to_f12_as_primary=Enable +-me_state=Normal ++me_state=Disabled +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0003-lenovo-x60-64MiB-Video-RAM-changed-to-default-previo.patch b/config/coreboot/default/patches/0003-lenovo-x60-64MiB-Video-RAM-changed-to-default-previo.patch deleted file mode 100644 index db064a9d..00000000 --- a/config/coreboot/default/patches/0003-lenovo-x60-64MiB-Video-RAM-changed-to-default-previo.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 14920409e51a9a0997d488b166d90bfad56f61f1 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sun, 3 Jan 2021 03:34:01 +0000 -Subject: [PATCH 03/65] lenovo/x60: 64MiB Video RAM changed to default - (previously it was 8MiB) - ---- - src/mainboard/lenovo/x60/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/lenovo/x60/cmos.default b/src/mainboard/lenovo/x60/cmos.default -index 58825c8a36..8e0aaf427d 100644 ---- a/src/mainboard/lenovo/x60/cmos.default -+++ b/src/mainboard/lenovo/x60/cmos.default -@@ -17,4 +17,4 @@ trackpoint=Enable - sticky_fn=Disable - power_management_beeps=Enable - low_battery_beep=Enable --gfx_uma_size=8M -+gfx_uma_size=64M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0004-lenovo-t60-make-64MiB-VRAM-the-default-in-cmos.defau.patch b/config/coreboot/default/patches/0004-lenovo-t60-make-64MiB-VRAM-the-default-in-cmos.defau.patch deleted file mode 100644 index 738d486e..00000000 --- a/config/coreboot/default/patches/0004-lenovo-t60-make-64MiB-VRAM-the-default-in-cmos.defau.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 92b009babd1e4a63dd34638924b9559727713369 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Mon, 22 Feb 2021 22:16:59 +0000 -Subject: [PATCH 04/65] lenovo/t60: make 64MiB VRAM the default in cmos.default - ---- - src/mainboard/lenovo/t60/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/lenovo/t60/cmos.default b/src/mainboard/lenovo/t60/cmos.default -index 283a5747ee..91f6c0e6e2 100644 ---- a/src/mainboard/lenovo/t60/cmos.default -+++ b/src/mainboard/lenovo/t60/cmos.default -@@ -17,4 +17,4 @@ trackpoint=Enable - sticky_fn=Disable - power_management_beeps=Enable - low_battery_beep=Enable --gfx_uma_size=8M -+gfx_uma_size=64M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0004-set-me_state-Disabled-on-all-cmos.default-files.patch b/config/coreboot/default/patches/0004-set-me_state-Disabled-on-all-cmos.default-files.patch new file mode 100644 index 00000000..71695404 --- /dev/null +++ b/config/coreboot/default/patches/0004-set-me_state-Disabled-on-all-cmos.default-files.patch @@ -0,0 +1,124 @@ +From c697c90ace86edfe724c86bd6a680cf0ae0e4b58 Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Wed, 2 Mar 2022 21:50:01 +0000 +Subject: [PATCH 04/51] set me_state=Disabled on all cmos.default files! + +yeah. why the hell isn't this the default + +Signed-off-by: Leah Rowe +--- + src/mainboard/lenovo/l520/cmos.default | 2 +- + src/mainboard/lenovo/t420/cmos.default | 2 +- + src/mainboard/lenovo/t420s/cmos.default | 2 +- + src/mainboard/lenovo/t430/cmos.default | 2 +- + src/mainboard/lenovo/t430s/cmos.default | 2 +- + src/mainboard/lenovo/t520/cmos.default | 2 +- + src/mainboard/lenovo/t530/cmos.default | 2 +- + src/mainboard/lenovo/x220/cmos.default | 2 +- + src/mainboard/protectli/vault_cml/cmos.default | 2 +- + src/mainboard/system76/tgl-u/cmos.default | 2 +- + 10 files changed, 10 insertions(+), 10 deletions(-) + +diff --git a/src/mainboard/lenovo/l520/cmos.default b/src/mainboard/lenovo/l520/cmos.default +index be08e0a342..b8970efa46 100644 +--- a/src/mainboard/lenovo/l520/cmos.default ++++ b/src/mainboard/lenovo/l520/cmos.default +@@ -16,4 +16,4 @@ sticky_fn=Disable + trackpoint=Enable + backlight=Both + usb_always_on=Disable +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/lenovo/t420/cmos.default b/src/mainboard/lenovo/t420/cmos.default +index 6fd26c5fe3..27a62d07b3 100644 +--- a/src/mainboard/lenovo/t420/cmos.default ++++ b/src/mainboard/lenovo/t420/cmos.default +@@ -16,4 +16,4 @@ sticky_fn=Disable + trackpoint=Enable + hybrid_graphics_mode=Integrated Only + usb_always_on=Disable +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/lenovo/t420s/cmos.default b/src/mainboard/lenovo/t420s/cmos.default +index 6fd26c5fe3..27a62d07b3 100644 +--- a/src/mainboard/lenovo/t420s/cmos.default ++++ b/src/mainboard/lenovo/t420s/cmos.default +@@ -16,4 +16,4 @@ sticky_fn=Disable + trackpoint=Enable + hybrid_graphics_mode=Integrated Only + usb_always_on=Disable +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/lenovo/t430/cmos.default b/src/mainboard/lenovo/t430/cmos.default +index c896eadec1..6d1e172056 100644 +--- a/src/mainboard/lenovo/t430/cmos.default ++++ b/src/mainboard/lenovo/t430/cmos.default +@@ -17,4 +17,4 @@ trackpoint=Enable + backlight=Both + usb_always_on=Disable + hybrid_graphics_mode=Integrated Only +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/lenovo/t430s/cmos.default b/src/mainboard/lenovo/t430s/cmos.default +index 286fb0ae8c..5a05c73721 100644 +--- a/src/mainboard/lenovo/t430s/cmos.default ++++ b/src/mainboard/lenovo/t430s/cmos.default +@@ -18,4 +18,4 @@ backlight=Both + enable_dual_graphics=Disable + usb_always_on=Disable + f1_to_f12_as_primary=Enable +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/lenovo/t520/cmos.default b/src/mainboard/lenovo/t520/cmos.default +index 4857f92f67..ab1be1a678 100644 +--- a/src/mainboard/lenovo/t520/cmos.default ++++ b/src/mainboard/lenovo/t520/cmos.default +@@ -17,4 +17,4 @@ trackpoint=Enable + backlight=Both + hybrid_graphics_mode=Integrated Only + usb_always_on=Disable +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/lenovo/t530/cmos.default b/src/mainboard/lenovo/t530/cmos.default +index 4857f92f67..ab1be1a678 100644 +--- a/src/mainboard/lenovo/t530/cmos.default ++++ b/src/mainboard/lenovo/t530/cmos.default +@@ -17,4 +17,4 @@ trackpoint=Enable + backlight=Both + hybrid_graphics_mode=Integrated Only + usb_always_on=Disable +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/lenovo/x220/cmos.default b/src/mainboard/lenovo/x220/cmos.default +index ef706c1303..b318ab9772 100644 +--- a/src/mainboard/lenovo/x220/cmos.default ++++ b/src/mainboard/lenovo/x220/cmos.default +@@ -15,4 +15,4 @@ usb_always_on=Disable + fn_ctrl_swap=Disable + sticky_fn=Disable + trackpoint=Enable +-me_state=Normal ++me_state=Disabled +diff --git a/src/mainboard/protectli/vault_cml/cmos.default b/src/mainboard/protectli/vault_cml/cmos.default +index d61046df6b..8c793fd1c3 100644 +--- a/src/mainboard/protectli/vault_cml/cmos.default ++++ b/src/mainboard/protectli/vault_cml/cmos.default +@@ -2,4 +2,4 @@ + + boot_option=Fallback + debug_level=Debug +-me_state=Enable ++me_state=Disabled +diff --git a/src/mainboard/system76/tgl-u/cmos.default b/src/mainboard/system76/tgl-u/cmos.default +index d61046df6b..8c793fd1c3 100644 +--- a/src/mainboard/system76/tgl-u/cmos.default ++++ b/src/mainboard/system76/tgl-u/cmos.default +@@ -2,4 +2,4 @@ + + boot_option=Fallback + debug_level=Debug +-me_state=Enable ++me_state=Disabled +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0005-lenovo-t400-set-VRAM-to-256MiB-VRAM-by-default.patch b/config/coreboot/default/patches/0005-lenovo-t400-set-VRAM-to-256MiB-VRAM-by-default.patch deleted file mode 100644 index 439679e2..00000000 --- a/config/coreboot/default/patches/0005-lenovo-t400-set-VRAM-to-256MiB-VRAM-by-default.patch +++ /dev/null @@ -1,23 +0,0 @@ -From c7ad2407a7f515d487332382bb55025873c3d987 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Fri, 14 May 2021 13:10:33 +0100 -Subject: [PATCH 05/65] lenovo/t400: set VRAM to 256MiB VRAM by default - -Signed-off-by: Leah Rowe ---- - src/mainboard/lenovo/t400/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/lenovo/t400/cmos.default b/src/mainboard/lenovo/t400/cmos.default -index a16d386dd1..e7bb32306c 100644 ---- a/src/mainboard/lenovo/t400/cmos.default -+++ b/src/mainboard/lenovo/t400/cmos.default -@@ -15,4 +15,4 @@ power_management_beeps=Enable - low_battery_beep=Enable - sata_mode=AHCI - hybrid_graphics_mode=Integrated Only --gfx_uma_size=32M -+gfx_uma_size=256M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0005-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch b/config/coreboot/default/patches/0005-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch new file mode 100644 index 00000000..b7b514cd --- /dev/null +++ b/config/coreboot/default/patches/0005-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch @@ -0,0 +1,205 @@ +From d2f579b82921c2c35e4cf756db0ca476fbadfac1 Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Sun, 19 Feb 2023 18:21:43 +0000 +Subject: [PATCH 05/51] util/ifdtool: add --nuke flag (all 0xFF on region) + +When this option is used, the region's contents are overwritten +with all ones (0xFF). + +Example: + +./ifdtool --nuke gbe coreboot.rom +./ifdtool --nuke bios coreboot.com +./ifdtool --nuke me coreboot.com + +Rebased since the last revision update in lbmk. + +Signed-off-by: Leah Rowe +--- + util/ifdtool/ifdtool.c | 114 ++++++++++++++++++++++++++++++----------- + 1 file changed, 83 insertions(+), 31 deletions(-) + +diff --git a/util/ifdtool/ifdtool.c b/util/ifdtool/ifdtool.c +index 32b2081d93..1473cf058b 100644 +--- a/util/ifdtool/ifdtool.c ++++ b/util/ifdtool/ifdtool.c +@@ -2204,6 +2204,7 @@ static void print_usage(const char *name) + " tgl - Tiger Lake\n" + " wbg - Wellsburg\n" + " -S | --setpchstrap Write a PCH strap\n" ++ " -N | --nuke Overwrite the specified region with 0xFF (all ones)\n" + " -V | --newvalue The new value to write into PCH strap specified by -S\n" + " -v | --version: print the version\n" + " -h | --help: print this help\n\n" +@@ -2212,6 +2213,60 @@ static void print_usage(const char *name) + "\n"); + } + ++static int ++get_region_type_string(const char *region_type_string) ++{ ++ if (!strcasecmp("Descriptor", region_type_string)) ++ return 0; ++ else if (!strcasecmp("BIOS", region_type_string)) ++ return 1; ++ else if (!strcasecmp("ME", region_type_string)) ++ return 2; ++ else if (!strcasecmp("GbE", region_type_string)) ++ return 3; ++ else if (!strcasecmp("Platform Data", region_type_string)) ++ return 4; ++ else if (!strcasecmp("Device Exp1", region_type_string)) ++ return 5; ++ else if (!strcasecmp("Secondary BIOS", region_type_string)) ++ return 6; ++ else if (!strcasecmp("Reserved", region_type_string)) ++ return 7; ++ else if (!strcasecmp("EC", region_type_string)) ++ return 8; ++ else if (!strcasecmp("Device Exp2", region_type_string)) ++ return 9; ++ else if (!strcasecmp("IE", region_type_string)) ++ return 10; ++ else if (!strcasecmp("10GbE_0", region_type_string)) ++ return 11; ++ else if (!strcasecmp("10GbE_1", region_type_string)) ++ return 12; ++ else if (!strcasecmp("PTT", region_type_string)) ++ return 15; ++ return -1; ++} ++ ++static void ++nuke(const char *filename, char *image, int size, int region_type) ++{ ++ int i; ++ struct region region; ++ const struct frba *frba = find_frba(image, size); ++ if (!frba) ++ exit(EXIT_FAILURE); ++ ++ region = get_region(frba, region_type); ++ if (region.size > 0) { ++ for (i = region.base; i <= region.limit; i++) { ++ if ((i + 1) > (size)) ++ break; ++ image[i] = 0xFF; ++ } ++ write_image(filename, image, size); ++ } ++} ++ + int main(int argc, char *argv[]) + { + int opt, option_index = 0; +@@ -2219,6 +2274,7 @@ int main(int argc, char *argv[]) + int mode_em100 = 0, mode_locked = 0, mode_unlocked = 0, mode_validate = 0; + int mode_layout = 0, mode_newlayout = 0, mode_density = 0, mode_setstrap = 0; + int mode_read = 0, mode_altmedisable = 0, altmedisable = 0, mode_fmap_template = 0; ++ int mode_nuke = 0; + int mode_gpr0_disable = 0, mode_gpr0_enable = 0, mode_gpr0_status = 0; + char *region_type_string = NULL, *region_fname = NULL; + const char *layout_fname = NULL; +@@ -2254,6 +2310,7 @@ int main(int argc, char *argv[]) + {"validate", 0, NULL, 't'}, + {"setpchstrap", 1, NULL, 'S'}, + {"newvalue", 1, NULL, 'V'}, ++ {"nuke", 1, NULL, 'N'}, + {0, 0, 0, 0} + }; + +@@ -2303,35 +2360,8 @@ int main(int argc, char *argv[]) + region_fname++; + // Descriptor, BIOS, ME, GbE, Platform + // valid type? +- if (!strcasecmp("Descriptor", region_type_string)) +- region_type = 0; +- else if (!strcasecmp("BIOS", region_type_string)) +- region_type = 1; +- else if (!strcasecmp("ME", region_type_string)) +- region_type = 2; +- else if (!strcasecmp("GbE", region_type_string)) +- region_type = 3; +- else if (!strcasecmp("Platform Data", region_type_string)) +- region_type = 4; +- else if (!strcasecmp("Device Exp1", region_type_string)) +- region_type = 5; +- else if (!strcasecmp("Secondary BIOS", region_type_string)) +- region_type = 6; +- else if (!strcasecmp("Reserved", region_type_string)) +- region_type = 7; +- else if (!strcasecmp("EC", region_type_string)) +- region_type = 8; +- else if (!strcasecmp("Device Exp2", region_type_string)) +- region_type = 9; +- else if (!strcasecmp("IE", region_type_string)) +- region_type = 10; +- else if (!strcasecmp("10GbE_0", region_type_string)) +- region_type = 11; +- else if (!strcasecmp("10GbE_1", region_type_string)) +- region_type = 12; +- else if (!strcasecmp("PTT", region_type_string)) +- region_type = 15; +- if (region_type == -1) { ++ if ((region_type = ++ get_region_type_string(region_type_string)) == -1) { + fprintf(stderr, "No such region type: '%s'\n\n", + region_type_string); + fprintf(stderr, "run '%s -h' for usage\n", argv[0]); +@@ -2508,6 +2538,22 @@ int main(int argc, char *argv[]) + case 't': + mode_validate = 1; + break; ++ case 'N': ++ region_type_string = strdup(optarg); ++ if (!region_type_string) { ++ fprintf(stderr, "No region specified\n"); ++ print_usage(argv[0]); ++ exit(EXIT_FAILURE); ++ } ++ if ((region_type = ++ get_region_type_string(region_type_string)) == -1) { ++ fprintf(stderr, "No such region type: '%s'\n\n", ++ region_type_string); ++ print_usage(argv[0]); ++ exit(EXIT_FAILURE); ++ } ++ mode_nuke = 1; ++ break; + case 'v': + print_version(); + exit(EXIT_SUCCESS); +@@ -2524,7 +2570,8 @@ int main(int argc, char *argv[]) + if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject + + mode_setstrap + mode_newlayout + (mode_spifreq | mode_em100 | + mode_unlocked | mode_locked) + mode_altmedisable + mode_validate + +- (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status) > 1) { ++ (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status + ++ mode_nuke) > 1) { + fprintf(stderr, "You may not specify more than one mode.\n\n"); + fprintf(stderr, "run '%s -h' for usage\n", argv[0]); + exit(EXIT_FAILURE); +@@ -2533,7 +2580,8 @@ int main(int argc, char *argv[]) + if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject + + mode_setstrap + mode_newlayout + mode_spifreq + mode_em100 + + mode_locked + mode_unlocked + mode_density + mode_altmedisable + +- mode_validate + (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status) == 0) { ++ mode_validate + (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status + ++ mode_nuke) == 0) { + fprintf(stderr, "You need to specify a mode.\n\n"); + fprintf(stderr, "run '%s -h' for usage\n", argv[0]); + exit(EXIT_FAILURE); +@@ -2646,6 +2694,10 @@ int main(int argc, char *argv[]) + write_image(new_filename, image, size); + } + ++ if (mode_nuke) { ++ nuke(new_filename, image, size, region_type); ++ } ++ + if (mode_altmedisable) { + struct fpsba *fpsba = find_fpsba(image, size); + struct fmsba *fmsba = find_fmsba(image, size); +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0006-lenovo-x200-set-VRAM-to-256MiB-by-default.patch b/config/coreboot/default/patches/0006-lenovo-x200-set-VRAM-to-256MiB-by-default.patch deleted file mode 100644 index 477c1724..00000000 --- a/config/coreboot/default/patches/0006-lenovo-x200-set-VRAM-to-256MiB-by-default.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 79f686dae47d2ef934b5c95979195f9d3c1978e6 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Fri, 14 May 2021 13:11:59 +0100 -Subject: [PATCH 06/65] lenovo/x200: set VRAM to 256MiB by default - -Signed-off-by: Leah Rowe ---- - src/mainboard/lenovo/x200/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/lenovo/x200/cmos.default b/src/mainboard/lenovo/x200/cmos.default -index 434af5d227..443ef54e41 100644 ---- a/src/mainboard/lenovo/x200/cmos.default -+++ b/src/mainboard/lenovo/x200/cmos.default -@@ -14,4 +14,4 @@ sticky_fn=Disable - power_management_beeps=Enable - low_battery_beep=Enable - sata_mode=AHCI --gfx_uma_size=32M -+gfx_uma_size=256M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0006-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch b/config/coreboot/default/patches/0006-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch new file mode 100644 index 00000000..71f2f22d --- /dev/null +++ b/config/coreboot/default/patches/0006-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch @@ -0,0 +1,28 @@ +From a5bc59037dabd95b6595c5aaf38b83da2a91de54 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Sat, 6 May 2023 15:53:41 -0600 +Subject: [PATCH 06/51] mb/dell/e6400: Enable 01.0 device in devicetree for + dGPU models + +Change-Id: I9b8e5d3cd1e1f64dc87b682b1e045b6342924aed +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/e6400/devicetree.cb | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/e6400/devicetree.cb +index bb954cbd7b..e9f3915d17 100644 +--- a/src/mainboard/dell/e6400/devicetree.cb ++++ b/src/mainboard/dell/e6400/devicetree.cb +@@ -19,7 +19,7 @@ chip northbridge/intel/gm45 + ops gm45_pci_domain_ops + + device pci 00.0 on end # host bridge +- device pci 01.0 off end ++ device pci 01.0 on end + device pci 02.0 on end # VGA + device pci 02.1 on end # Display + device pci 03.0 on end # ME +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0007-Remove-warning-for-coreboot-images-built-without-a-p.patch b/config/coreboot/default/patches/0007-Remove-warning-for-coreboot-images-built-without-a-p.patch new file mode 100644 index 00000000..fa364ca1 --- /dev/null +++ b/config/coreboot/default/patches/0007-Remove-warning-for-coreboot-images-built-without-a-p.patch @@ -0,0 +1,39 @@ +From f883599a362f1383f3712b72516f76187d0a9cbe Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Fri, 12 May 2023 19:55:15 -0600 +Subject: [PATCH 07/51] Remove warning for coreboot images built without a + payload + +I added this in upstream to prevent people from accidentally flashing +roms without a payload resulting in a no boot situation, but in +libreboot lbmk handles the payload and thus this warning always comes +up. This has caused confusion and concern so just patch it out. +--- + payloads/Makefile.mk | 13 +------------ + 1 file changed, 1 insertion(+), 12 deletions(-) + +diff --git a/payloads/Makefile.mk b/payloads/Makefile.mk +index 5f988dac1b..516133880f 100644 +--- a/payloads/Makefile.mk ++++ b/payloads/Makefile.mk +@@ -50,16 +50,5 @@ distclean-payloads: + print-repo-info-payloads: + -$(foreach payload, $(PAYLOADS_LIST), $(MAKE) -C $(payload) print-repo-info 2>/dev/null; ) + +-ifeq ($(CONFIG_PAYLOAD_NONE),y) +-show_notices:: warn_no_payload +-endif +- +-warn_no_payload: +- printf "\n\t** WARNING **\n" +- printf "coreboot has been built without a payload. Writing\n" +- printf "a coreboot image without a payload to your board's\n" +- printf "flash chip will result in a non-booting system. You\n" +- printf "can use cbfstool to add a payload to the image.\n\n" +- + .PHONY: force-payload coreinfo nvramcui +-.PHONY: clean-payloads distclean-payloads print-repo-info-payloads warn_no_payload ++.PHONY: clean-payloads distclean-payloads print-repo-info-payloads +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0007-gigabyte-ga-g41m-es2l-set-VRAM-to-256MiB-by-default.patch b/config/coreboot/default/patches/0007-gigabyte-ga-g41m-es2l-set-VRAM-to-256MiB-by-default.patch deleted file mode 100644 index e435726d..00000000 --- a/config/coreboot/default/patches/0007-gigabyte-ga-g41m-es2l-set-VRAM-to-256MiB-by-default.patch +++ /dev/null @@ -1,23 +0,0 @@ -From a79498ab8a7eac809d99db2fad5b0f8c63870e43 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Fri, 14 May 2021 13:18:26 +0100 -Subject: [PATCH 07/65] gigabyte/ga-g41m-es2l: set VRAM to 256MiB by default - -Signed-off-by: Leah Rowe ---- - src/mainboard/gigabyte/ga-g41m-es2l/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default b/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default -index fe79c83570..4a1f97a9d8 100644 ---- a/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default -+++ b/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default -@@ -4,4 +4,4 @@ boot_option=Fallback - debug_level=Debug - power_on_after_fail=Enable - nmi=Enable --gfx_uma_size=64M -+gfx_uma_size=256M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0008-acer-g43t-am3-set-VRAM-to-256MiB-by-default.patch b/config/coreboot/default/patches/0008-acer-g43t-am3-set-VRAM-to-256MiB-by-default.patch deleted file mode 100644 index 9aa1b1cb..00000000 --- a/config/coreboot/default/patches/0008-acer-g43t-am3-set-VRAM-to-256MiB-by-default.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 5fbdbb11b215e3aa4256dfaa468224fd0c2a1fb0 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Fri, 14 May 2021 13:21:39 +0100 -Subject: [PATCH 08/65] acer/g43t-am3: set VRAM to 256MiB by default - -Signed-off-by: Leah Rowe ---- - src/mainboard/acer/g43t-am3/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/acer/g43t-am3/cmos.default b/src/mainboard/acer/g43t-am3/cmos.default -index 23f0e55f3e..8d6c4db1ce 100644 ---- a/src/mainboard/acer/g43t-am3/cmos.default -+++ b/src/mainboard/acer/g43t-am3/cmos.default -@@ -5,4 +5,4 @@ debug_level=Debug - power_on_after_fail=Disable - nmi=Enable - sata_mode=AHCI --gfx_uma_size=64M -+gfx_uma_size=256M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0008-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch b/config/coreboot/default/patches/0008-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch new file mode 100644 index 00000000..48b9d21e --- /dev/null +++ b/config/coreboot/default/patches/0008-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch @@ -0,0 +1,430 @@ +From 40545928c415c27d3a30748e4bfdee7f9d8f82f9 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Sat, 19 Aug 2023 16:19:10 -0600 +Subject: [PATCH 08/51] mb/dell: Add Latitude E6530 (Ivy Bridge) + +Mainboard is QALA0/LA-7761P (UMA). The version with a Nvidia dGPU was +not tested. I do not physically have this system; someone with physical +access to one sent me the output of autoport which I then modified to +produce this port. + +I was also sent the vbios obtained using intel_bios_dumper while running +version A22 of the vendor firmware, which I then processed using +`intelvbttool --inoprom vbios.bin --outvbt data.vbt` to obtain data.vbt. + +This was originally tested and found to be working as a standalone board +port in Libreboot, though this variant based port in upstream coreboot +has not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: I9fcd73416018574f8934962f92c8222d0101cb71 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 8 + + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e6530/data.vbt | Bin 0 -> 4280 bytes + .../variants/e6530/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e6530/gpio.c | 192 ++++++++++++++++++ + .../variants/e6530/hda_verb.c | 32 +++ + .../variants/e6530/overridetree.cb | 37 ++++ + 7 files changed, 286 insertions(+) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index be9ac37845..03377275f0 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -23,6 +23,12 @@ config BOARD_DELL_LATITUDE_E6430 + select MAINBOARD_USES_IFD_GBE_REGION + select SOUTHBRIDGE_INTEL_C216 + ++config BOARD_DELL_LATITUDE_E6530 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_12288 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select SOUTHBRIDGE_INTEL_C216 ++ + if BOARD_DELL_SNB_IVB_LATITUDE_COMMON + + config DRAM_RESET_GATE_GPIO +@@ -33,6 +39,7 @@ config MAINBOARD_DIR + + config MAINBOARD_PART_NUMBER + default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 ++ default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 + + config OVERRIDE_DEVICETREE + default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" +@@ -42,6 +49,7 @@ config USBDEBUG_HCD_INDEX + + config VARIANT_DIR + default "e6430" if BOARD_DELL_LATITUDE_E6430 ++ default "e6530" if BOARD_DELL_LATITUDE_E6530 + + config VGA_BIOS_ID + default "8086,0166" +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index 183252630a..d89185d670 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -2,3 +2,6 @@ + + config BOARD_DELL_LATITUDE_E6430 + bool "Latitude E6430" ++ ++config BOARD_DELL_LATITUDE_E6530 ++ bool "Latitude E6530" +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..af64a913d521fe240ce30e114e90fe75d3841bbc +GIT binary patch +literal 4280 +zcmdT{U2GiH75-*te`aTAcGqJQY$rA+e`ZbWcy_TDH@NC}cbl$*NjAn^RtPm->J7GV +zY_m3jN`RN*h9FvG3Do9+qP$c^s1;PLB3@br9>Ag%La5?TLP`-2DDaR65U2_)=g!QU +zIJ+cPr4+cc-@WIad+wQY&YW{+c1J!nPPgn&^^N3Hy*D37jg0=7CSl@*=mXr>x75gi +zTMlK0$A=H4Mh~QKqCa92jz_;d3rtFqp(o-4gCnzxrJ2}Rw@^!haWpFv +zr&_=Q6YubieL}zoiJ0a+c+(bGwFN5g1pz;^rGP1sM+lHB@UAPM2&F=RB&yv@$caXF +ze~Io&3CQe=cMHr!e{yiokd?~p&F&k`jg99Ex7}WO=$8*Kx8wXv4eSa_CJqKVkyRr& +zCdcqs*@M5!gD84e@fW{|5B#mDGTH;JFw`h^stQcTjf@V3pNe8&f$=NG?-+klRGea* +zX1vOHi}4@EM~qJyfuM>e#%9J&Mjzt`j5OnB#;uGZ<1WTMj3vgSj3*esXZY{I`KqUa +zfbB~~a>piTMAVDNyHR<{0{F7}8pool{7_h6u?7yg +zlyNm>-Eq_&WjW{0$9ZHq6x?~W8l2#1g0CyrtN#R-nbWG(?>iNG1zRiZgj;Lm_%rVe +zwZ6i{g#sR5xudpbj~5H9TNIQ3gMikIG@l(Z4IR@^2|Vu|LZteLF5@$KH5`Pr&3_vn +z^!Fn27&z6hSPR+*;D*&lm-)OE=ZgjK*(X&XdBq7RDUd7>|Lou?UMNg6lVCB;TPz{Z +zN4-~p*Rr=uq8OYdlAy38{}dt5%2}aUax{}zWzDRgmsn2|!)=Bp)U35;Ld3H+Ye=*_ +z4S&0{5*TVI!OU-SWz$XUwrrnb%9?NHau^uhn>&;%&X#8O7mt)SIJr8D$u?NS=rUW6 +zCmnxV&FgUDAWX}gZ+1AH&-C4Q=3sl5RX9=OWPfCtcRZi4tkX44YYfRH*@?H7T=Kz= +zG*i-wU2jbJMK%ChTMTXZFJEm~k;KCj*D60g=j!2ns8Q`g%jSRK^?=IwL^|I5-K2zH +z8*A0-mL%Q`R#xatM^u^E=IrX+2&bc;3rv!NipS^G*6zlIRAV(JJDU($OBHuptd&1( +zoNu>t*Q}|siS8#MYavR6j7&(~AEL#OaV(^+gy>YrSPiLfgy{2-p=xT2Mtd}4R8#XB +z-LDysYw8J&{-GJKYwEiif07x7u5QsOr5oeA`ZJxDb>p|XdQzvCb>nSaeP1UfY_x~f +z9bwuRHf|5Ahr{&iu<>+QeI`t=g^e>|^=z1;5o23K?TP5uo%2>aXQWCKr#dH;Qr0*j +z3LecKKarw5`Xblzd$&H4oP%y&l3egyUc<=TGXaGC^5Cz)J +z4?eb?Kub*nWYdmhV-4?jJW +zjd{Tu*o*CE*QO)}{_J>haU5zn+1QJ^eBg|d5n5-%|DwS@1+yaZ_2@KjK>)nIBR-xB@+1PQ2*c$lV?Z13o +zbX%CHpm`!1Z4$d28~9k{rfu-0w@xg6{q!u2{)Dm_))4RK$?#7P*t7V+g_9d ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c +new file mode 100644 +index 0000000000..777570765a +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c +@@ -0,0 +1,192 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_NATIVE, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_OUTPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio28 = GPIO_LEVEL_LOW, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++ .gpio30 = GPIO_RESET_RSMRST, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio13 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_INPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_HIGH, ++ .gpio45 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c +new file mode 100644 +index 0000000000..3ebccff81d +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76df, /* Codec Vendor / Device ID: IDT */ ++ 0x10280535, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x10280535), ++ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862806, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb +new file mode 100644 +index 0000000000..8b9c82fba4 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb +@@ -0,0 +1,37 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x0535 inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00000251" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 0, 3 }, ++ { 1, 1, 3 }, ++ { 1, 1, 4 }, ++ { 1, 1, 4 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 2, 6 }, ++ { 1, 2, 6 }, ++ }" ++ ++ device ref xhci on ++ register "superspeed_capable_ports" = "0x0000000f" ++ register "xhci_overcurrent_mapping" = "0x00000c03" ++ register "xhci_switchable_ports" = "0x0000000f" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0009-lenovo-t400-Enable-all-SATA-ports.patch b/config/coreboot/default/patches/0009-lenovo-t400-Enable-all-SATA-ports.patch deleted file mode 100644 index 7dead180..00000000 --- a/config/coreboot/default/patches/0009-lenovo-t400-Enable-all-SATA-ports.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 15003992f57b62ce59dc282cd089987306126cc9 Mon Sep 17 00:00:00 2001 -From: persmule -Date: Sun, 31 Oct 2021 23:33:26 +0000 -Subject: [PATCH 09/65] lenovo/t400: Enable all SATA ports - -There are 2 SATA ports on the chassis of t400(s), but at least one dock for -t400 contains a port for (P/S)ATA device, and t400s has a eSATA port on its -chassis, and another one on its dock. - -They have to be unmasked via device tree to use. - -This patch unmasked all SATA ports found within t400s with factory firmware. ---- - src/mainboard/lenovo/t400/devicetree.cb | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/src/mainboard/lenovo/t400/devicetree.cb b/src/mainboard/lenovo/t400/devicetree.cb -index 259c3e1b21..3d007533a4 100644 ---- a/src/mainboard/lenovo/t400/devicetree.cb -+++ b/src/mainboard/lenovo/t400/devicetree.cb -@@ -46,8 +46,8 @@ chip northbridge/intel/gm45 - register "gpe0_en" = "0x01000000" - register "gpi1_routing" = "2" - -- # Set AHCI mode, enable ports 1 and 2. -- register "sata_port_map" = "0x03" -+ # Set AHCI mode, enable ports 1, 2, 5 and 6. -+ register "sata_port_map" = "0x33" - register "sata_clock_request" = "0" - register "sata_traffic_monitor" = "0" - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0009-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch b/config/coreboot/default/patches/0009-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch new file mode 100644 index 00000000..a2a13166 --- /dev/null +++ b/config/coreboot/default/patches/0009-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch @@ -0,0 +1,430 @@ +From 423e2e28618b08a4107aea0a2fbc1096f5a8be02 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Wed, 31 Jan 2024 22:57:07 -0700 +Subject: [PATCH 09/51] mb/dell: Add Latitude E5530 (Ivy Bridge) + +Mainboard is QXW10/LA-7902P (UMA). I do not physically have this board; +someone with physical access to one sent me the output of autoport which +I then modified to produce this port. I was also sent the VBT binary, +which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running +version A21 of the vendor firmware. + +This was originally tested and found to be working as a standalone board +port in Libreboot, but this variant based port in upstream coreboot has +not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +Change-Id: Idaf6618df70aa19d8e60b2263088737712dec5f0 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 7 + + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e5530/data.vbt | Bin 0 -> 6144 bytes + .../variants/e5530/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e5530/gpio.c | 194 ++++++++++++++++++ + .../variants/e5530/hda_verb.c | 32 +++ + .../variants/e5530/overridetree.cb | 39 ++++ + 7 files changed, 289 insertions(+) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 03377275f0..183a67bec3 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + ++config BOARD_DELL_LATITUDE_E5530 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_12288 ++ select SOUTHBRIDGE_INTEL_C216 ++ + config BOARD_DELL_LATITUDE_E6430 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_12288 +@@ -38,6 +43,7 @@ config MAINBOARD_DIR + default "dell/snb_ivb_latitude" + + config MAINBOARD_PART_NUMBER ++ default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 + default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 + default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 + +@@ -48,6 +54,7 @@ config USBDEBUG_HCD_INDEX + default 2 + + config VARIANT_DIR ++ default "e5530" if BOARD_DELL_LATITUDE_E5530 + default "e6430" if BOARD_DELL_LATITUDE_E6430 + default "e6530" if BOARD_DELL_LATITUDE_E6530 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index d89185d670..c15ef4028f 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -1,5 +1,8 @@ + ## SPDX-License-Identifier: GPL-2.0-only + ++config BOARD_DELL_LATITUDE_E5530 ++ bool "Latitude E5530" ++ + config BOARD_DELL_LATITUDE_E6430 + bool "Latitude E6430" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..3c54b70be7856a6420d001112d7f17f8bab46ed3 +GIT binary patch +literal 6144 +zcmeHKU2Gdg5dO}0w$JA~+qs02q)iz56C9e5vuQ#oL0l3O+%|395Q2peO{y4(2uX0t +zuMja1N)bPb1cE+5)fYsCK!89MFQAGChyWpk5PuRkS^cR)3#-(r*-?zo-O^C(kLvv8XM<+Y3tdt^YY!P?!oTe +zJ^ed-x6w0Lh5fN#jsv5TWE#mtd*_yky}9xDK(kOwLt+C7_AQAd#iwr=o0`gvQZ`{x +z6ZeT`x^^;8+a~jSa^o~PF@8J6N5;o#dhCwebaM;!_oisw1#O9K={qQM<@Oeu$lXeN +z#wJGcW4Y<2)-A{Bot(NoKX%>qdnw-AOi9bKT9Z~HL5|7PJDHz4kGlEx143q+26EH6 +z{4KfB^9;?#dw(WfA; +zBCR3@pCS1a;A|CZW1h7H*l#mW{%y{bf)9ofiz!EHzyiac@{RpMzz>O-<~{hx5tw%b +z3ZJWD4_g-`iF`tUJb}+Vfe;XI1T2Y4_Y!iVk<MLB9et&!A7LDDE7&5ye#|hn%s#IWgagDEPNHHMUhb- +ztc9t?uz{bD#kh#kpsE;AO-wWHV?4olPStRPag^~k<737bjBgmt|ufS}_`LGs2bcSKCVBh4s0>G7ZR_@NWx +zkph}GhP}~YR?roT!61GqzQ?gBsuv3jY}UXbmr|alv^VxUqbz5<`5=!hhpaa*7DK~4 +zP4ad6dhH!>nYpc4{J&G-w{UiWo$zXnTz{tAq0|?c_`QJ7pKmCwIpe7Uix$P?9}v*1 +z(aVR6OkMkQ6oM}*UC@j78!~>7=OZCVYXeu|u0SiI4}w$uw6&0P09LF%Hp}O&IA3gl +z4@ap0NfAe+q(ZVm{Bwe*Do~kbCc$Q!x7b3Sk9tLgVmsR#oOrY`tq +z%|?L!zRd2-$V6^@$H@ml^iaX;uzoVB3JA(|h9tcNKXHdA43N0|18 +z&3$2QE=)(l=6qQDAWT1oO-2=+FU)Mg<35IDJ+8Tp; +z40F)Xt}$rVFdsLxLk7KRn4cKhmjeLd38j)HbM_Y%!3i_aD?8An8za8 +z@d(AD=Gv&%5;e{}p%i?_q(T*^IwzEx*Eu1wKHV9=lVUvjqv!B@cWER!2fe%`IqO?q +z!=Wf4kzGUaLX8`m#*P^uL?%M#6qc9Qu(YT|ZMb#7UzCc_(DkQYEGQ#%k_O0@^DN5S@MXi$D;acJ>#cTV-(U@Offv4ACp4hO4$Ll!WO)s3P4=t9vpWBC +zSckhlcD?xUuX=Gx96Dx{IsQ23r&;o1*+^Cp2RA3nd$A-RIHP2Q7uitC>c67FIR*5} +zB3a%B!?6K=TJ$W+SJv@*9Lms{mTvWmU4Zanj_Z*lSqOGISzYp?yawOqLhVhRt#-E6 +zd)YW~h&meh-5prIE}Cr&7f?MMi&cqTt_^%Fa?>k(=`9jVoIf@}{g+WX#TpWuc+!2v +zPG^>A|NZ2GlGsKdGqN{7>Fr7+Hc_^3z}uBhC4?nzOQ*!QyVugGjkK_~$bvtfY`h79 +z9rOI3;Mt}9)_G{zXTAPw`8T@6=Ut0r9R5;0#Zy|#8F;v4^UAmqft3iXL|`QXD-l?U +Jz~2*rUjdP?m;3+# + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c +new file mode 100644 +index 0000000000..ff83db095b +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c +@@ -0,0 +1,14 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c +new file mode 100644 +index 0000000000..0599f13921 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c +@@ -0,0 +1,194 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_GPIO, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_NATIVE, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio12 = GPIO_DIR_OUTPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_OUTPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio12 = GPIO_LEVEL_HIGH, ++ .gpio28 = GPIO_LEVEL_LOW, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++ .gpio30 = GPIO_RESET_RSMRST, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio13 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_GPIO, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_INPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_INPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_INPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio53 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_GPIO, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++ .gpio74 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c +new file mode 100644 +index 0000000000..3e89a6d75f +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76df, /* Codec Vendor / Device ID: IDT */ ++ 0x1028053d, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x1028053d), ++ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0xd5a301a0), ++ ++ 0x80862806, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb +new file mode 100644 +index 0000000000..85c448d010 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb +@@ -0,0 +1,39 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x053d inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00000000" ++ register "gpu_pch_backlight" = "0x03d003d0" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 0, 3 }, ++ { 1, 2, 4 }, ++ { 1, 1, 4 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 0, 6 }, ++ { 1, 1, 6 }, ++ }" ++ ++ device ref xhci on ++ register "superspeed_capable_ports" = "0x0000000f" ++ register "xhci_overcurrent_mapping" = "0x00000c03" ++ register "xhci_switchable_ports" = "0x0000000f" ++ end ++ device ref gbe off end ++ device ref pcie_rp7 on end # BCM5761 Ethernet ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0010-coreboot-Add-Lenovo-X230-patch-gfx_uma_size-224M-by-.patch b/config/coreboot/default/patches/0010-coreboot-Add-Lenovo-X230-patch-gfx_uma_size-224M-by-.patch deleted file mode 100644 index e5cac363..00000000 --- a/config/coreboot/default/patches/0010-coreboot-Add-Lenovo-X230-patch-gfx_uma_size-224M-by-.patch +++ /dev/null @@ -1,22 +0,0 @@ -From f8ea06883762c906a7f3ad7d286b628bca3443ab Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Mon, 20 Dec 2021 01:29:31 +0000 -Subject: [PATCH 10/65] coreboot: Add Lenovo X230 patch: gfx_uma_size 224M by - default - ---- - src/mainboard/lenovo/x230/cmos.default | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/src/mainboard/lenovo/x230/cmos.default b/src/mainboard/lenovo/x230/cmos.default -index 732e214b32..3bb78960b9 100644 ---- a/src/mainboard/lenovo/x230/cmos.default -+++ b/src/mainboard/lenovo/x230/cmos.default -@@ -18,3 +18,4 @@ backlight=Both - usb_always_on=Disable - f1_to_f12_as_primary=Enable - me_state=Normal -+gfx_uma_size=224M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0010-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch b/config/coreboot/default/patches/0010-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch new file mode 100644 index 00000000..80b2c147 --- /dev/null +++ b/config/coreboot/default/patches/0010-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch @@ -0,0 +1,435 @@ +From 200668a694f1c534a94a0bc8996416e246fe91b0 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Sun, 26 Nov 2023 17:08:52 -0700 +Subject: [PATCH 10/51] mb/dell: Add Latitude E6420 (Sandy Bridge) + +Mainboard is PAL50/LA-6591P (UMA). The version with an Nvidia dGPU was +not tested. I do not physically have this system; someone with physical +access to one sent me the output of autoport which I then modified to +produce this port. I was also sent the VBT binary, which was obtained +from `/sys/kernel/debug/dri/0/i915_vbt` while running version A25 of the +vendor firmware. + +This was originally tested and found to be working as a standalone board +port in Libreboot, but this variant based port in upstream coreboot has +not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: Ic48d9ea58172a5b13958c8afebcb19c8929c4394 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 13 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e6420/data.vbt | Bin 0 -> 6144 bytes + .../variants/e6420/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e6420/gpio.c | 191 ++++++++++++++++++ + .../variants/e6420/hda_verb.c | 32 +++ + .../variants/e6420/overridetree.cb | 35 ++++ + 7 files changed, 287 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 183a67bec3..d2786970ee 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -17,6 +17,12 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + ++config BOARD_DELL_LATITUDE_E6420 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_10240 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E5530 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_12288 +@@ -43,6 +49,7 @@ config MAINBOARD_DIR + default "dell/snb_ivb_latitude" + + config MAINBOARD_PART_NUMBER ++ default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 + default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 + default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 +@@ -54,11 +61,15 @@ config USBDEBUG_HCD_INDEX + default 2 + + config VARIANT_DIR ++ default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e5530" if BOARD_DELL_LATITUDE_E5530 + default "e6430" if BOARD_DELL_LATITUDE_E6430 + default "e6530" if BOARD_DELL_LATITUDE_E6530 + + config VGA_BIOS_ID +- default "8086,0166" ++ default "8086,0166" if BOARD_DELL_LATITUDE_E5530 ++ default "8086,0126" if BOARD_DELL_LATITUDE_E6420 ++ default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ ++ || BOARD_DELL_LATITUDE_E6530 + + endif +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index c15ef4028f..257d428a70 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -1,5 +1,8 @@ + ## SPDX-License-Identifier: GPL-2.0-only + ++config BOARD_DELL_LATITUDE_E6420 ++ bool "Latitude E6420" ++ + config BOARD_DELL_LATITUDE_E5530 + bool "Latitude E5530" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..d3662eea1bc78b60be6d0bd2cc38bb46b654afbd +GIT binary patch +literal 6144 +zcmeHKeQZ-z6hE);wSBvNZ|mO1=*HLC2BQN8uVX6{N9eY)75ORymb$R8!YYuAZEgeE +zKk|S@Fen*n41W-viAF;r%)~^EkpLz-B{2q##)LmGAtoY;7*Qhv_1yPbw$TC$2}G0K +z=6Ao&x#ym9?z!i_&TOh(kLzky2cN8MTpny#R<;VU4Rkn?rBIz(YL~BBw<%b&zGhSH +z$~AQ>@D0d=Xx6RE0BwSxspWdrW9y#t7^)^(T-R<7W?O6ZTI%A+j=`C|f*UP9{h|4>ANrAe~?ymV*)83AaT#FuTjP=C2cg5P~ +zt4w78r$t#300cWY_k)mevmAmFI3&oBfytoAAPQiYK$XEIgHwV@5-gJ-Q-*p8yfTDj +zaDz=1Y!X1B3`OpQ&Ik}bM|0xHn0gYNZw0rT=7AXS2in-q8K^?)0|el+Z6geW7i7MM +zv~!|>HqL-|Fk}EYOa@)Rzg9Y +z8;!mD_V*XSjT33~$`o`s>zEGBq8AQ`HaH?y!Fh2QiX1v@aCo4LaENf&DZ_cE2A2qb +z5@cC}X)=S^1RvpXLWs~v*hqMau$!=t@B-mg!XV)|;eEm>!Z6`H;R4|&!d1d`f|S7^ +zli+B98*!TfPE&6~NVM5j3v{N3OTjpnm_L@BPh(}esd(J!gj?~iJP?n|OZZOiTqlql +zg{%-$T|cR +zZx5|xm>Fl>;@$m};P{0WC>O~-p>*$9CpHRLgN|POkqD^UP4nw|4nf0bc8MOBk<;%js +zfpCAWNzqSPlz@X%j9CGrwZDKUl@K{g6pzqiIIARDQ)#@^RW&0pmNG;XZ?!SlHB?L# +zKRAMgq(R;aQd%@Gy38-LS@ix)fR**(P3B9wI=Uk^&cWmmwBE34GYvuh1uQF+BUdWyQC5SaEM1QvKlHBMs13C}n{0SwRxW +ziekMa&kvRFruRcKCevGy5)TxUBDlur@E{TtQ^NQ>nO+Cgl)&Ga(PxqVW?e3TLH-UY +zdL3T{z^xdd`$(STFUb8R*cKa}r>n{Wk+MXRH~o-hN}#9OF*>T#>rfhiRs(Wc-R^9@ +z%F=<}dn(E}ADc03zJ>JvZe;_8f+WFLL4%qNYs`_aa`a$Pl5H;iO^Wt*cP3W(d=(g} +zZ%nKT1$|r-tAv8($u2-BI2Uiz#%OT&!Q3b~Ru2P2j;Gem!@wfPsTR%J>W{8z)oq^J +k^Qm&?O@bFkw4CTocwoW<6CRlGz=Q`TJTT#bN9KWl0rH4|j{pDw + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c +new file mode 100644 +index 0000000000..ff83db095b +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c +@@ -0,0 +1,14 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c +new file mode 100644 +index 0000000000..943c743f48 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c +@@ -0,0 +1,191 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_NATIVE, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_NATIVE, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_GPIO, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++ .gpio31 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_HIGH, ++ .gpio45 = GPIO_LEVEL_LOW, ++ .gpio49 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c +new file mode 100644 +index 0000000000..ede8445aaf +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x10280493, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x10280493), ++ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb +new file mode 100644 +index 0000000000..3012a3177f +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb +@@ -0,0 +1,35 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x0493 inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x0000054f" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 0, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 0, 6 }, ++ { 1, 0, 7 }, ++ }" ++ ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0011-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch b/config/coreboot/default/patches/0011-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch deleted file mode 100644 index 375c14fc..00000000 --- a/config/coreboot/default/patches/0011-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 47483865af46a3d1f8732d1bd97f4a7155cc24d6 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Mon, 3 Jan 2022 19:06:22 +0000 -Subject: [PATCH 11/65] lenovo/x230: set me_state=Disabled in cmos.default - -I only recently found out about this. It's possible to use me_cleaner to -do the same thing, but some people might just flash coreboot and not do -anything with the ME region - -With this change, the ME is set to disabled. It's my understanding that this -will accomplish more or less the same thing as me_cleaner, without actually -using that. Of course, I still recommend using me_cleaner - -I saw this when I audited coreboot's git history, and saw this: - -commit 833e9bad4762e0dca6c867d3a18dbaf6d5166be8 -Author: Evgeny Zinoviev -Date: Thu Nov 21 21:47:31 2019 +0300 - - sb/intel/bd82x6x: Support ME Soft Temporary Disable Mode ---- - src/mainboard/lenovo/x230/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/lenovo/x230/cmos.default b/src/mainboard/lenovo/x230/cmos.default -index 3bb78960b9..ae47202aac 100644 ---- a/src/mainboard/lenovo/x230/cmos.default -+++ b/src/mainboard/lenovo/x230/cmos.default -@@ -17,5 +17,5 @@ trackpoint=Enable - backlight=Both - usb_always_on=Disable - f1_to_f12_as_primary=Enable --me_state=Normal -+me_state=Disabled - gfx_uma_size=224M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0011-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch b/config/coreboot/default/patches/0011-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch new file mode 100644 index 00000000..2b378406 --- /dev/null +++ b/config/coreboot/default/patches/0011-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch @@ -0,0 +1,449 @@ +From 53abe363f2fa038080a976f2d3a2c63ee8da9022 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Wed, 31 Jan 2024 22:07:25 -0700 +Subject: [PATCH 11/51] mb/dell: Add Latitude E6520 (Sandy Bridge) + +Mainboard is PAL60/LA-6562P (UMA). The version with an Nvidia dGPU was +not tested. I do not physically have this system; someone with physical +access to one sent me the output of autoport which I then modified to +produce this port. I was also sent the VBT binary, which was obtained +from `/sys/kernel/debug/dri/0/i915_vbt` while running version A08 of the +vendor firmware. + +This was originally tested and found to be working as a standalone board +port in Libreboot, but this variant based port in upstream coreboot has +not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: Ibdd40cc15642b8d404159d5962670ccc4167a9ec +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 9 + + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e6520/data.vbt | Bin 0 -> 6144 bytes + .../variants/e6520/early_init.c | 31 +++ + .../snb_ivb_latitude/variants/e6520/gpio.c | 190 ++++++++++++++++++ + .../variants/e6520/hda_verb.c | 32 +++ + .../variants/e6520/overridetree.cb | 35 ++++ + 7 files changed, 300 insertions(+) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index d2786970ee..72bdc96c0a 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -23,6 +23,12 @@ config BOARD_DELL_LATITUDE_E6420 + select MAINBOARD_USES_IFD_GBE_REGION + select SOUTHBRIDGE_INTEL_BD82X6X + ++config BOARD_DELL_LATITUDE_E6520 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_10240 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E5530 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_12288 +@@ -50,6 +56,7 @@ config MAINBOARD_DIR + + config MAINBOARD_PART_NUMBER + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 ++ default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 + default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 + default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 + default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 +@@ -62,11 +69,13 @@ config USBDEBUG_HCD_INDEX + + config VARIANT_DIR + default "e6420" if BOARD_DELL_LATITUDE_E6420 ++ default "e6520" if BOARD_DELL_LATITUDE_E6520 + default "e5530" if BOARD_DELL_LATITUDE_E5530 + default "e6430" if BOARD_DELL_LATITUDE_E6430 + default "e6530" if BOARD_DELL_LATITUDE_E6530 + + config VGA_BIOS_ID ++ default "8086,0116" if BOARD_DELL_LATITUDE_E6520 + default "8086,0166" if BOARD_DELL_LATITUDE_E5530 + default "8086,0126" if BOARD_DELL_LATITUDE_E6420 + default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index 257d428a70..c7665ac263 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -3,6 +3,9 @@ + config BOARD_DELL_LATITUDE_E6420 + bool "Latitude E6420" + ++config BOARD_DELL_LATITUDE_E6520 ++ bool "Latitude E6520" ++ + config BOARD_DELL_LATITUDE_E5530 + bool "Latitude E5530" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..0ef16ee7cb482d2cb91ea80c3f419759355f7ba0 +GIT binary patch +literal 6144 +zcmeHKZ){Ul6hE);wSB#PZ|mL$bQ^!}HW(eF@H)0JafGfbqsZ9G21{L7Sg{or$5uN) +z_QgG55e!O(8p8*oBhhF`l$n^QF%rN;rzFNqqcPzFCd5QSB1Y7RKt1=pmTk1aFo9^Y +z+x+gi_nvdlJ@?#m&wZWW=G#bH>ze$J`&!oe*Q|E0r!)d89LYY8b$aowZEoG-uiIF+ +z#n;$ezm6VjWFixQ +z)4V8f0Gt`D`+>9Fr~tnJ76EJ`5D_F1cn-`0$RgN9unI6kfYkzIiO?W`ON4+34lv1_ +zNdPDkq1cf$p8^EW;TS*O$CdzNo#1fbIG_Oi0T(ti0jwyt0le_p_HlvX^CFvr)>$b> +zO-z8^CSU`w=mIK7Q)@9fR;XUzrFu{T=rRyygIZBpU9+Or>+?4R9%~G?Y-|g)Z`Sti +z+do(U*Wb-xR~DzjS<75#=Us4sH^C9U2FCbND7L7u$>M|<;t=AnRfI9C0v8c~AVg7t +zIU<3D2oK^>L;%r(*o=4*u?Mja@dDyi#4zFn;(f#^#3*76aUSs#;tJv#La-6YLRdQB +zdcvfERkvH?k~GJlfMVe-1?&ZXy}n)YwnVAgNlz#zX;=IX)-F +z)9LL3lbEdY5Co)LsK?vP)7s}G(5xduE!Y!#Wgh_T&xi$uUA#0e}X3D~`J(bHz;DgTa@GrpW6=>eZwJeNYYo*GjF=``;( +zuoQ3|V5YoKd$j=KK{`uSX*DeU1oJg=+RT6)rLe6%2>Ci^!5ao=*gS}wFN=nUf`fTF +zM?Gb5ycWjM7I?MJ!2;w|LFg=UoLq-ytr2iemG)AsW}bI4X9PK}T5UKsQi7anu=tD6 +zf|={kXkNeQBD>6bQ3taC8XJOJ^e40_ydyfr&a41L^1)jNrKwnT0Vx +z-jp>o1ffJNommZ4?=TIPlePIw0hgQ706f*tBC`#pg>9&zRHe>J2%RxBTrOc6Adh9E +ziJr`?VQH!N!_GkoKaoq|+3$^Ae0#sUxXlmM1Huq~g<=Ls?ILv+nQcH%PQedGOlH=Q +z77rMcJlH4Mkc#U2(IDv>rsm1aHpsdL_RdT^i_ACcQUMIJcSus}*(?CIiy^#^=t=g1 +z+*^Zbh30&^#_bKclSy9pL$ao +z00DnFy~Uek!JRwhVX!of0)$Sa*X^S~LMQH0 ++#include ++#include ++#include ++ ++const struct southbridge_usb_port mainboard_usb_ports[] = { ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 0, 2 }, ++ { 1, 1, 2 }, ++ { 1, 0, 3 }, ++ { 1, 0, 3 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 0, 6 }, ++ { 1, 0, 7 }, ++}; ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c +new file mode 100644 +index 0000000000..61f01816c4 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c +@@ -0,0 +1,190 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_NATIVE, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_NATIVE, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_HIGH, ++ .gpio45 = GPIO_LEVEL_LOW, ++ .gpio49 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c +new file mode 100644 +index 0000000000..ae376691e7 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x10280494, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x10280494), ++ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0x400000f2), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb +new file mode 100644 +index 0000000000..f90f2dee1f +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb +@@ -0,0 +1,35 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x0494 inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00001312" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 0, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 0, 6 }, ++ { 1, 0, 7 }, ++ }" ++ ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0012-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch b/config/coreboot/default/patches/0012-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch new file mode 100644 index 00000000..4fd3bba2 --- /dev/null +++ b/config/coreboot/default/patches/0012-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch @@ -0,0 +1,442 @@ +From 3f8eade6150f582129332f6347e9a685f8a7b500 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Wed, 7 Feb 2024 10:23:38 -0700 +Subject: [PATCH 12/51] mb/dell: Add Latitude E5520 (Sandy Bridge) + +Mainboard is Krug 15". I do not physically have this system; someone +with physical access to one sent me the output of autoport which I then +modified to produce this port. I was also sent the VBT binary, which was +obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version +A14 of the vendor firmware. + +This was originally tested and found to be working as a standalone +board port in Libreboot, but this variant based port in upstream +coreboot has not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e5520/data.vbt | Bin 0 -> 6144 bytes + .../variants/e5520/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e5520/gpio.c | 195 ++++++++++++++++++ + .../variants/e5520/hda_verb.c | 32 +++ + .../variants/e5520/overridetree.cb | 39 ++++ + 7 files changed, 292 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 72bdc96c0a..4e94a7ef80 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + ++config BOARD_DELL_LATITUDE_E5520 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_6144 ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E6420 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_10240 +@@ -55,6 +60,7 @@ config MAINBOARD_DIR + default "dell/snb_ivb_latitude" + + config MAINBOARD_PART_NUMBER ++ default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 + default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 +@@ -68,6 +74,7 @@ config USBDEBUG_HCD_INDEX + default 2 + + config VARIANT_DIR ++ default "e5520" if BOARD_DELL_LATITUDE_E5520 + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 + default "e5530" if BOARD_DELL_LATITUDE_E5530 +@@ -77,7 +84,8 @@ config VARIANT_DIR + config VGA_BIOS_ID + default "8086,0116" if BOARD_DELL_LATITUDE_E6520 + default "8086,0166" if BOARD_DELL_LATITUDE_E5530 +- default "8086,0126" if BOARD_DELL_LATITUDE_E6420 ++ default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ ++ || BOARD_DELL_LATITUDE_E5520 + default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ + || BOARD_DELL_LATITUDE_E6530 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index c7665ac263..7976691f21 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -1,5 +1,8 @@ + ## SPDX-License-Identifier: GPL-2.0-only + ++config BOARD_DELL_LATITUDE_E5520 ++ bool "Latitude E5520" ++ + config BOARD_DELL_LATITUDE_E6420 + bool "Latitude E6420" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..b511e75262e37fa123d674e9a7b21a8dfe427729 +GIT binary patch +literal 6144 +zcmeHKZ){Ul6hE);wSBvNZ|mL$bmQOM2BTvXUI!}^N9ejTij1vnu+)Wx6Fjj +z&F`Lj?>YC}bI(2Z+}C+6zKyiGrosQXuW7A+&1%lnvFGE +zeD#gB>*#Tq4&j^|7Xcz1r^pp*)g#T}u1Me3ct>Pgls5Qi3!6e2W0%`a-Ic|3efWuR +zXJ@#}wJyGMTXTcY<%@TBKh@(3hP$Gjv}E}rx-%9D_eLXhYe!c&-VyDg-Cdo1>Biji +zNNsnlFW#|jdoOj?mZ43m>cVO%UE9@*E7x|%V~c4`XD4l9GCi~@+7pfMibfX8L?!^I +zc~Rg1I5SxH1DAEZ0{jA41jrJBh#-l;b6^%g7QrThRe)&%tQH_!ggOD7A_PRRgGuI0 +z0zi=n#rCB66d-sO$M~^6wgeb$2fH1|0R`v}xUiWCU`4SF;Dyh&j|mK&6WJWJ&Pq9I +zVgmFQfh+)vE}(KWwHA|Oh3fSkss|;2E(2i}s1?gRRV%8!K7U={vHD=s#+Fd)W^M1j +z{R4$??VSvEWpgT=vCM&1-U$bI6CB~IV3Z$$Vv7o!EDnev4j~R(MHsazZ~^fLLKGF4 +zEfQFOa3dZ?1Q1P#&4?!vyAk^k&m&$z3?WV+-b0*1j37o4=MX<3E+eiYge(Ht2umAW +zOPDmU>UL{flI9u|@JtVvfp#o8ek?VfVV9YP5(%pnZX~{PKq4WoWGmV8t$=Ri@{zLQ +zNYYt4<$0Ry&qIoG;7s-t333)Nu8opN{NG!)&!I@eO(cVx8vBVEBvotJ7%yNl$7iQ_ +zI=xk30+V$ff`F61}ljxDE1dcda^&!do|r^eJkI?aC- +zEQMSfm?VYL6W4=aCiy4rk%xq~5LV?bi|GL2$G7li<%c7yd;6T34 +zQBN5huZ3~6`ChGkpb$Bg5ITb#2iK-qs|1`=sl6Dhn(Lj&8Agt?S{sTDmmtRj7Jm_1 +zFnt{w&FdFkWS3bl>OeL?eO+*i{)9G!cSI-InGt|U0eEYmRCOHm7|I;#LO8ksRIeJ# +zGe+jTwPg4C4TYuN(9zULV3k+hI$YuPo=%N8oZ#u_4S!3Xelt6N0BmuC`hCNeg+&97 +z6*!>)uHvr%2004GZv?!_-y&|TRmil=9D%Q`1aXBsnD^gov3*UZI34&1_vn(B=T4kZ +z_A>ClXVIBNaS^hd&^DrU6VgZMYeadMkdFxcktn|ra-Gl;n^I{bt86rCQ=YMry*B!$ +zP5ID9KDE)GZOY#^VwPyRq^y+48j0?ZlzxdkC()CV@`*&wO7vGr;qjA3rb}gIwM-gi +zx>HsT$mEDj-%Ir=@rh7)SR;b +zAEWQGv_X1)wq0y5Ha0c~&psIslnaeSK~X8*^Z9SE44_`P#KIUL +zf6^N2f>5HCPWM3N+f0MyWOV^kz~!-wVc4MRXOY>4Jsxd1RyBKEMzNf{RKhesKFdbq +zJ(*dl)ZQGyW_x->i#;FvQ*=Nv&nG0N5@D@jjv_Q}K}6MP?1A6`JGe +zDwj9pN+x;T4>`I9e5x(uqdK#OGB31ikk@Xv=dxLb4fx(;ktX@rOb~M~?dYQQYiPia +z8r;jUQ?sd2@3||-cb2Eb%JFYfxHsONoaJ^eqoKN{3SATgBQlEoN7&ZV9Eni9+>jLln16fFy(=V +H=7E0zE^L4Z + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c +new file mode 100644 +index 0000000000..ff83db095b +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c +@@ -0,0 +1,14 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c +new file mode 100644 +index 0000000000..f76b93d9f0 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c +@@ -0,0 +1,195 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_NATIVE, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_GPIO, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_NATIVE, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio12 = GPIO_DIR_OUTPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio12 = GPIO_LEVEL_HIGH, ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_NATIVE, ++ .gpio46 = GPIO_MODE_GPIO, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_NATIVE, ++ .gpio50 = GPIO_MODE_GPIO, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_GPIO, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_GPIO, ++ .gpio56 = GPIO_MODE_GPIO, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_OUTPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio46 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio50 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_OUTPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio53 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio55 = GPIO_DIR_OUTPUT, ++ .gpio56 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_LOW, ++ .gpio37 = GPIO_LEVEL_LOW, ++ .gpio46 = GPIO_LEVEL_HIGH, ++ .gpio50 = GPIO_LEVEL_HIGH, ++ .gpio51 = GPIO_LEVEL_LOW, ++ .gpio55 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_NATIVE, ++ .gpio69 = GPIO_MODE_NATIVE, ++ .gpio70 = GPIO_MODE_NATIVE, ++ .gpio71 = GPIO_MODE_NATIVE, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_GPIO, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio74 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c +new file mode 100644 +index 0000000000..1373975352 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x1028049a, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x1028049a), ++ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a301a0), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb +new file mode 100644 +index 0000000000..479d1b696e +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb +@@ -0,0 +1,39 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x049a inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00000218" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 1, 6 }, ++ { 1, 1, 7 }, ++ }" ++ ++ device ref gbe off end ++ device ref pcie_rp4 off end ++ device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0012-set-me_state-Disabled-on-all-cmos.default-files.patch b/config/coreboot/default/patches/0012-set-me_state-Disabled-on-all-cmos.default-files.patch deleted file mode 100644 index 28a4a6a4..00000000 --- a/config/coreboot/default/patches/0012-set-me_state-Disabled-on-all-cmos.default-files.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 84f7622ea0c3a78742f129d2ec9f437e6c424839 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Wed, 2 Mar 2022 21:50:01 +0000 -Subject: [PATCH 12/65] set me_state=Disabled on all cmos.default files! - -yeah. why the hell isn't this the default - -Signed-off-by: Leah Rowe ---- - src/mainboard/lenovo/l520/cmos.default | 2 +- - src/mainboard/lenovo/t420/cmos.default | 2 +- - src/mainboard/lenovo/t420s/cmos.default | 2 +- - src/mainboard/lenovo/t430/cmos.default | 2 +- - src/mainboard/lenovo/t430s/cmos.default | 2 +- - src/mainboard/lenovo/t520/cmos.default | 2 +- - src/mainboard/lenovo/t530/cmos.default | 2 +- - src/mainboard/lenovo/x220/cmos.default | 2 +- - src/mainboard/protectli/vault_cml/cmos.default | 2 +- - src/mainboard/system76/tgl-u/cmos.default | 2 +- - 10 files changed, 10 insertions(+), 10 deletions(-) - -diff --git a/src/mainboard/lenovo/l520/cmos.default b/src/mainboard/lenovo/l520/cmos.default -index be08e0a342..b8970efa46 100644 ---- a/src/mainboard/lenovo/l520/cmos.default -+++ b/src/mainboard/lenovo/l520/cmos.default -@@ -16,4 +16,4 @@ sticky_fn=Disable - trackpoint=Enable - backlight=Both - usb_always_on=Disable --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/lenovo/t420/cmos.default b/src/mainboard/lenovo/t420/cmos.default -index 6fd26c5fe3..27a62d07b3 100644 ---- a/src/mainboard/lenovo/t420/cmos.default -+++ b/src/mainboard/lenovo/t420/cmos.default -@@ -16,4 +16,4 @@ sticky_fn=Disable - trackpoint=Enable - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/lenovo/t420s/cmos.default b/src/mainboard/lenovo/t420s/cmos.default -index 6fd26c5fe3..27a62d07b3 100644 ---- a/src/mainboard/lenovo/t420s/cmos.default -+++ b/src/mainboard/lenovo/t420s/cmos.default -@@ -16,4 +16,4 @@ sticky_fn=Disable - trackpoint=Enable - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/lenovo/t430/cmos.default b/src/mainboard/lenovo/t430/cmos.default -index c896eadec1..6d1e172056 100644 ---- a/src/mainboard/lenovo/t430/cmos.default -+++ b/src/mainboard/lenovo/t430/cmos.default -@@ -17,4 +17,4 @@ trackpoint=Enable - backlight=Both - usb_always_on=Disable - hybrid_graphics_mode=Integrated Only --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/lenovo/t430s/cmos.default b/src/mainboard/lenovo/t430s/cmos.default -index 286fb0ae8c..5a05c73721 100644 ---- a/src/mainboard/lenovo/t430s/cmos.default -+++ b/src/mainboard/lenovo/t430s/cmos.default -@@ -18,4 +18,4 @@ backlight=Both - enable_dual_graphics=Disable - usb_always_on=Disable - f1_to_f12_as_primary=Enable --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/lenovo/t520/cmos.default b/src/mainboard/lenovo/t520/cmos.default -index 4857f92f67..ab1be1a678 100644 ---- a/src/mainboard/lenovo/t520/cmos.default -+++ b/src/mainboard/lenovo/t520/cmos.default -@@ -17,4 +17,4 @@ trackpoint=Enable - backlight=Both - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/lenovo/t530/cmos.default b/src/mainboard/lenovo/t530/cmos.default -index 4857f92f67..ab1be1a678 100644 ---- a/src/mainboard/lenovo/t530/cmos.default -+++ b/src/mainboard/lenovo/t530/cmos.default -@@ -17,4 +17,4 @@ trackpoint=Enable - backlight=Both - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/lenovo/x220/cmos.default b/src/mainboard/lenovo/x220/cmos.default -index ef706c1303..b318ab9772 100644 ---- a/src/mainboard/lenovo/x220/cmos.default -+++ b/src/mainboard/lenovo/x220/cmos.default -@@ -15,4 +15,4 @@ usb_always_on=Disable - fn_ctrl_swap=Disable - sticky_fn=Disable - trackpoint=Enable --me_state=Normal -+me_state=Disabled -diff --git a/src/mainboard/protectli/vault_cml/cmos.default b/src/mainboard/protectli/vault_cml/cmos.default -index d61046df6b..8c793fd1c3 100644 ---- a/src/mainboard/protectli/vault_cml/cmos.default -+++ b/src/mainboard/protectli/vault_cml/cmos.default -@@ -2,4 +2,4 @@ - - boot_option=Fallback - debug_level=Debug --me_state=Enable -+me_state=Disabled -diff --git a/src/mainboard/system76/tgl-u/cmos.default b/src/mainboard/system76/tgl-u/cmos.default -index d61046df6b..8c793fd1c3 100644 ---- a/src/mainboard/system76/tgl-u/cmos.default -+++ b/src/mainboard/system76/tgl-u/cmos.default -@@ -2,4 +2,4 @@ - - boot_option=Fallback - debug_level=Debug --me_state=Enable -+me_state=Disabled --- -2.39.5 - diff --git a/config/coreboot/default/patches/0013-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch b/config/coreboot/default/patches/0013-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch new file mode 100644 index 00000000..5944535f --- /dev/null +++ b/config/coreboot/default/patches/0013-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch @@ -0,0 +1,442 @@ +From bbcd6a7f09ee99f3b26b0931f1dcd70970242ee8 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Mon, 4 Mar 2024 18:05:43 -0700 +Subject: [PATCH 13/51] mb/dell: Add Latitude E5420 (Sandy Bridge) + +Mainboard is Krug 14". I do not physically have this system; someone +with physical access to one sent me the output of autoport which I then +modified to produce this port. I was also sent the VBT binary, which was +obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version +A02 of the vendor firmware. + +This was originally tested and found to be working as a standalone board +port in Libreboot, but this variant based port in upstream coreboot has +not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: I0283653156083768e1fd451bcf539b4e028589f4 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e5420/data.vbt | Bin 0 -> 6144 bytes + .../variants/e5420/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e5420/gpio.c | 195 ++++++++++++++++++ + .../variants/e5420/hda_verb.c | 32 +++ + .../variants/e5420/overridetree.cb | 39 ++++ + 7 files changed, 292 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 4e94a7ef80..e6a21ffb99 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + ++config BOARD_DELL_LATITUDE_E5420 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_6144 ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E5520 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_6144 +@@ -60,6 +65,7 @@ config MAINBOARD_DIR + default "dell/snb_ivb_latitude" + + config MAINBOARD_PART_NUMBER ++ default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 + default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 +@@ -74,6 +80,7 @@ config USBDEBUG_HCD_INDEX + default 2 + + config VARIANT_DIR ++ default "e5420" if BOARD_DELL_LATITUDE_E5420 + default "e5520" if BOARD_DELL_LATITUDE_E5520 + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 +@@ -82,7 +89,8 @@ config VARIANT_DIR + default "e6530" if BOARD_DELL_LATITUDE_E6530 + + config VGA_BIOS_ID +- default "8086,0116" if BOARD_DELL_LATITUDE_E6520 ++ default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \ ++ || BOARD_DELL_LATITUDE_E5420 + default "8086,0166" if BOARD_DELL_LATITUDE_E5530 + default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ + || BOARD_DELL_LATITUDE_E5520 +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index 7976691f21..a3fa2b1837 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -1,5 +1,8 @@ + ## SPDX-License-Identifier: GPL-2.0-only + ++config BOARD_DELL_LATITUDE_E5420 ++ bool "Latitude E5420" ++ + config BOARD_DELL_LATITUDE_E5520 + bool "Latitude E5520" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..98b82fe6110fd295b5749041ec7f8c084ace5f57 +GIT binary patch +literal 6144 +zcmeHKeQZ-z6hE);wSBvNZ!2$ObQ^;MgV6zl*Rhp}BXnCCMZU^_r7jRwT!kfLo8?3H +zk9)u(7?cb(hChhTM57@QFfmbMB!G!dNsO6BW5OSp5EGF^jHnTTdhUBI+h`e+1ft1q +z^SfW?+;h)4_uO+|XEfEV$91)}c;!*XQ5O +z)OU7u$J@4U+lk)#GSW%c%c)v`%R6?`w)LIyu6bD7-j0o&X9qUMcEsYlW3BU4rZRvt +zqAUpjf*qXuLCCsU0YM2I5@gB1WKd)f1+Yt?%HWd0DZxYumP(Ke?=ER{f^&}W<0k@mxff(?6+Stw+s6y%k1mM$cLk#^FWWI*9bE1GY +z&VY9?WC1u#23^3^UYw5?H0x2S2gN`x18Fko6_x(#MKyuCU_DV +zdkf*li41yW3p$*0Oo3+63kO6S91*KwP#l2i4jnc)JkUirL^$k}VbH0;CBh#BS=OLf +zW-yE3BRon75gG{_2~QIC5cUzCC%i)FCmbidM>tIwAPf>N5Pl?FC0r*+Sq!oXj!keQ +zVKcyK>TL+gc7oLco$28+FpeeXkEP}_Sea=mk#IWUR^m$!BogvszLPu83FJm0k6K*}ACcP}M4exU`*MKVwl5+t6JBpTkmm}xWflKUe~7}`!#%z#gAo{NxUrpDAndYktu +zI0}VLU`J7^xmF1AFiz5S^uzp*DPI$%$qq!(ikh0kP+(GKzF|@N?Y%_#Vp@M+xHr$F +z=%+18z`-fT%z)9-TS$~Dh@2yeN7!UIt0h`fWxUu`JvA_ra*8P48l%7KR0&c1;0R75 +z4f0oz(xQ3MWqz5>qW5M4tZWExHs8X@p!@CBU=7e{5^Jl{s7by`po-AJqM2l +znk(=^0bHkF0rUw7)^7j;$=_UIs8`6P6b-;vPDZ#U9L)W1_PAYRDP9k~;5$stt5ZiV +zD0>;i-?OlYY2}P9WVnfGos4xee2r=EGWHR}ADH$VV>cO=xU?!4TjIi)OMBYI_PX#b +zm-eBHed5BOT-x6*W>;{IqAga~G6lCQT93k>Q}CpsomJR*1%FjEkv?fuT%c-8RklXO +zU8;6KWk*zeU)4TW+1D!mrE0EhHZfbBeN{4S7X@Pig%};A99QTdA~wZruL*8y?K!jP +zG5R*k=);S}ZnA}on(uzNF +zyu>BcjA})C@bg%<;+Eh2;Sz4heFFCbZ@C{FrXMIbYzu>?Bi-|vZ}JSFU%JA>7$7et +z0Yo%CnOVZm#ZA}4kWZOn15};h5*#OM3b+6vHzgruMP>=5MNJK1y42{YgveP-!j%#( +z0rGe@8t%!=66Ti%K4|Gx=o7gFp83wQ;+s3H7+r^SKlpp3KKcr!3@|n;NCH_=qL=3T +zq3WH?en`b+W-HR-fnrhw*9aZ%M}lHX7@H?E>!6wv_&YQFEHdA$%Z1R--yub>=c@p? +z6@7Fc$&>sAxwiz{BE$1kb$K9Co=ozlA973y^i(^BM|EZ$$^y`0KyHiMJ%O*XbfEX1 +ziZaH>W(1pWL0bo|T!x__N$^$DpmxI=bL6WUK3JGyn?rw-qC4ZA$yGjIB}N(=ldD2O +zAJ@bxp2>n}u*mUIYFd>}O_wuwBD^r9<#=!0 +X1LGbT_rSOZ#yv3ZfpHH!G!Og(1Xg~J + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c +new file mode 100644 +index 0000000000..ff83db095b +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c +@@ -0,0 +1,14 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c +new file mode 100644 +index 0000000000..f76b93d9f0 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c +@@ -0,0 +1,195 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_NATIVE, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_GPIO, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_NATIVE, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio12 = GPIO_DIR_OUTPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio12 = GPIO_LEVEL_HIGH, ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_NATIVE, ++ .gpio46 = GPIO_MODE_GPIO, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_NATIVE, ++ .gpio50 = GPIO_MODE_GPIO, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_GPIO, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_GPIO, ++ .gpio56 = GPIO_MODE_GPIO, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_OUTPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio46 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio50 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_OUTPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio53 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio55 = GPIO_DIR_OUTPUT, ++ .gpio56 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_LOW, ++ .gpio37 = GPIO_LEVEL_LOW, ++ .gpio46 = GPIO_LEVEL_HIGH, ++ .gpio50 = GPIO_LEVEL_HIGH, ++ .gpio51 = GPIO_LEVEL_LOW, ++ .gpio55 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_NATIVE, ++ .gpio69 = GPIO_MODE_NATIVE, ++ .gpio70 = GPIO_MODE_NATIVE, ++ .gpio71 = GPIO_MODE_NATIVE, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_GPIO, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio74 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c +new file mode 100644 +index 0000000000..0bc6c35a63 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x1028049b, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x1028049b), ++ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0xd5a30130), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb +new file mode 100644 +index 0000000000..3f55bfd49d +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb +@@ -0,0 +1,39 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x049b inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00000c31" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 1, 6 }, ++ { 1, 1, 7 }, ++ }" ++ ++ device ref gbe off end ++ device ref pcie_rp4 off end ++ device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0013-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch b/config/coreboot/default/patches/0013-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch deleted file mode 100644 index a39d14bd..00000000 --- a/config/coreboot/default/patches/0013-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch +++ /dev/null @@ -1,205 +0,0 @@ -From 851aa297808a4776634df5817cae54c226b4d750 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sun, 19 Feb 2023 18:21:43 +0000 -Subject: [PATCH 13/65] util/ifdtool: add --nuke flag (all 0xFF on region) - -When this option is used, the region's contents are overwritten -with all ones (0xFF). - -Example: - -./ifdtool --nuke gbe coreboot.rom -./ifdtool --nuke bios coreboot.com -./ifdtool --nuke me coreboot.com - -Rebased since the last revision update in lbmk. - -Signed-off-by: Leah Rowe ---- - util/ifdtool/ifdtool.c | 114 ++++++++++++++++++++++++++++++----------- - 1 file changed, 83 insertions(+), 31 deletions(-) - -diff --git a/util/ifdtool/ifdtool.c b/util/ifdtool/ifdtool.c -index 32b2081d93..1473cf058b 100644 ---- a/util/ifdtool/ifdtool.c -+++ b/util/ifdtool/ifdtool.c -@@ -2204,6 +2204,7 @@ static void print_usage(const char *name) - " tgl - Tiger Lake\n" - " wbg - Wellsburg\n" - " -S | --setpchstrap Write a PCH strap\n" -+ " -N | --nuke Overwrite the specified region with 0xFF (all ones)\n" - " -V | --newvalue The new value to write into PCH strap specified by -S\n" - " -v | --version: print the version\n" - " -h | --help: print this help\n\n" -@@ -2212,6 +2213,60 @@ static void print_usage(const char *name) - "\n"); - } - -+static int -+get_region_type_string(const char *region_type_string) -+{ -+ if (!strcasecmp("Descriptor", region_type_string)) -+ return 0; -+ else if (!strcasecmp("BIOS", region_type_string)) -+ return 1; -+ else if (!strcasecmp("ME", region_type_string)) -+ return 2; -+ else if (!strcasecmp("GbE", region_type_string)) -+ return 3; -+ else if (!strcasecmp("Platform Data", region_type_string)) -+ return 4; -+ else if (!strcasecmp("Device Exp1", region_type_string)) -+ return 5; -+ else if (!strcasecmp("Secondary BIOS", region_type_string)) -+ return 6; -+ else if (!strcasecmp("Reserved", region_type_string)) -+ return 7; -+ else if (!strcasecmp("EC", region_type_string)) -+ return 8; -+ else if (!strcasecmp("Device Exp2", region_type_string)) -+ return 9; -+ else if (!strcasecmp("IE", region_type_string)) -+ return 10; -+ else if (!strcasecmp("10GbE_0", region_type_string)) -+ return 11; -+ else if (!strcasecmp("10GbE_1", region_type_string)) -+ return 12; -+ else if (!strcasecmp("PTT", region_type_string)) -+ return 15; -+ return -1; -+} -+ -+static void -+nuke(const char *filename, char *image, int size, int region_type) -+{ -+ int i; -+ struct region region; -+ const struct frba *frba = find_frba(image, size); -+ if (!frba) -+ exit(EXIT_FAILURE); -+ -+ region = get_region(frba, region_type); -+ if (region.size > 0) { -+ for (i = region.base; i <= region.limit; i++) { -+ if ((i + 1) > (size)) -+ break; -+ image[i] = 0xFF; -+ } -+ write_image(filename, image, size); -+ } -+} -+ - int main(int argc, char *argv[]) - { - int opt, option_index = 0; -@@ -2219,6 +2274,7 @@ int main(int argc, char *argv[]) - int mode_em100 = 0, mode_locked = 0, mode_unlocked = 0, mode_validate = 0; - int mode_layout = 0, mode_newlayout = 0, mode_density = 0, mode_setstrap = 0; - int mode_read = 0, mode_altmedisable = 0, altmedisable = 0, mode_fmap_template = 0; -+ int mode_nuke = 0; - int mode_gpr0_disable = 0, mode_gpr0_enable = 0, mode_gpr0_status = 0; - char *region_type_string = NULL, *region_fname = NULL; - const char *layout_fname = NULL; -@@ -2254,6 +2310,7 @@ int main(int argc, char *argv[]) - {"validate", 0, NULL, 't'}, - {"setpchstrap", 1, NULL, 'S'}, - {"newvalue", 1, NULL, 'V'}, -+ {"nuke", 1, NULL, 'N'}, - {0, 0, 0, 0} - }; - -@@ -2303,35 +2360,8 @@ int main(int argc, char *argv[]) - region_fname++; - // Descriptor, BIOS, ME, GbE, Platform - // valid type? -- if (!strcasecmp("Descriptor", region_type_string)) -- region_type = 0; -- else if (!strcasecmp("BIOS", region_type_string)) -- region_type = 1; -- else if (!strcasecmp("ME", region_type_string)) -- region_type = 2; -- else if (!strcasecmp("GbE", region_type_string)) -- region_type = 3; -- else if (!strcasecmp("Platform Data", region_type_string)) -- region_type = 4; -- else if (!strcasecmp("Device Exp1", region_type_string)) -- region_type = 5; -- else if (!strcasecmp("Secondary BIOS", region_type_string)) -- region_type = 6; -- else if (!strcasecmp("Reserved", region_type_string)) -- region_type = 7; -- else if (!strcasecmp("EC", region_type_string)) -- region_type = 8; -- else if (!strcasecmp("Device Exp2", region_type_string)) -- region_type = 9; -- else if (!strcasecmp("IE", region_type_string)) -- region_type = 10; -- else if (!strcasecmp("10GbE_0", region_type_string)) -- region_type = 11; -- else if (!strcasecmp("10GbE_1", region_type_string)) -- region_type = 12; -- else if (!strcasecmp("PTT", region_type_string)) -- region_type = 15; -- if (region_type == -1) { -+ if ((region_type = -+ get_region_type_string(region_type_string)) == -1) { - fprintf(stderr, "No such region type: '%s'\n\n", - region_type_string); - fprintf(stderr, "run '%s -h' for usage\n", argv[0]); -@@ -2508,6 +2538,22 @@ int main(int argc, char *argv[]) - case 't': - mode_validate = 1; - break; -+ case 'N': -+ region_type_string = strdup(optarg); -+ if (!region_type_string) { -+ fprintf(stderr, "No region specified\n"); -+ print_usage(argv[0]); -+ exit(EXIT_FAILURE); -+ } -+ if ((region_type = -+ get_region_type_string(region_type_string)) == -1) { -+ fprintf(stderr, "No such region type: '%s'\n\n", -+ region_type_string); -+ print_usage(argv[0]); -+ exit(EXIT_FAILURE); -+ } -+ mode_nuke = 1; -+ break; - case 'v': - print_version(); - exit(EXIT_SUCCESS); -@@ -2524,7 +2570,8 @@ int main(int argc, char *argv[]) - if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject + - mode_setstrap + mode_newlayout + (mode_spifreq | mode_em100 | - mode_unlocked | mode_locked) + mode_altmedisable + mode_validate + -- (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status) > 1) { -+ (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status + -+ mode_nuke) > 1) { - fprintf(stderr, "You may not specify more than one mode.\n\n"); - fprintf(stderr, "run '%s -h' for usage\n", argv[0]); - exit(EXIT_FAILURE); -@@ -2533,7 +2580,8 @@ int main(int argc, char *argv[]) - if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject + - mode_setstrap + mode_newlayout + mode_spifreq + mode_em100 + - mode_locked + mode_unlocked + mode_density + mode_altmedisable + -- mode_validate + (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status) == 0) { -+ mode_validate + (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status + -+ mode_nuke) == 0) { - fprintf(stderr, "You need to specify a mode.\n\n"); - fprintf(stderr, "run '%s -h' for usage\n", argv[0]); - exit(EXIT_FAILURE); -@@ -2646,6 +2694,10 @@ int main(int argc, char *argv[]) - write_image(new_filename, image, size); - } - -+ if (mode_nuke) { -+ nuke(new_filename, image, size, region_type); -+ } -+ - if (mode_altmedisable) { - struct fpsba *fpsba = find_fpsba(image, size); - struct fmsba *fmsba = find_fmsba(image, size); --- -2.39.5 - diff --git a/config/coreboot/default/patches/0014-fix-speedstep-on-x200-t400-Revert-cpu-intel-model_10.patch b/config/coreboot/default/patches/0014-fix-speedstep-on-x200-t400-Revert-cpu-intel-model_10.patch deleted file mode 100644 index 23677556..00000000 --- a/config/coreboot/default/patches/0014-fix-speedstep-on-x200-t400-Revert-cpu-intel-model_10.patch +++ /dev/null @@ -1,47 +0,0 @@ -From a1a4312c9bea5b7fb5170174dbd14f914c11637c Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Wed, 1 Dec 2021 02:53:00 +0000 -Subject: [PATCH 14/65] fix speedstep on x200/t400: Revert - "cpu/intel/model_1067x: enable PECI" - -This reverts commit 70fea013c7ebd6d85a7806748233fcfd76802f5f. - -Enabling PECI without microcode updates loaded causes the CPUID feature set -to become corrupted. And one consequence is broken SpeedStep. At least, that's -my understanding looking at Intel Errata. This revert is not a fix, because -upstream is correct (upstream assumes microcode updates). We will simply -maintain this revert patch in Libreboot, from now on. ---- - src/cpu/intel/model_1067x/model_1067x_init.c | 9 --------- - 1 file changed, 9 deletions(-) - -diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c -index d051e8915b..30ba2bf0c6 100644 ---- a/src/cpu/intel/model_1067x/model_1067x_init.c -+++ b/src/cpu/intel/model_1067x/model_1067x_init.c -@@ -141,8 +141,6 @@ static void configure_emttm_tables(void) - wrmsr(MSR_EMTTM_CR_TABLE(5), msr); - } - --#define IA32_PECI_CTL 0x5a0 -- - static void configure_misc(const int eist, const int tm2, const int emttm) - { - msr_t msr; -@@ -185,13 +183,6 @@ static void configure_misc(const int eist, const int tm2, const int emttm) - msr.lo |= (1 << 20); /* Lock Enhanced SpeedStep Enable */ - wrmsr(IA32_MISC_ENABLE, msr); - } -- -- /* Enable PECI -- WARNING: due to Erratum AW67 described in Intel document #318733 -- the microcode must be updated before this MSR is written to. */ -- msr = rdmsr(IA32_PECI_CTL); -- msr.lo |= 1; -- wrmsr(IA32_PECI_CTL, msr); - } - - #define PIC_SENS_CFG 0x1aa --- -2.39.5 - diff --git a/config/coreboot/default/patches/0014-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch b/config/coreboot/default/patches/0014-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch new file mode 100644 index 00000000..e8c46203 --- /dev/null +++ b/config/coreboot/default/patches/0014-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch @@ -0,0 +1,435 @@ +From cd6e699649459fa5ff2623018ccf3585eb3d3821 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Wed, 7 Feb 2024 15:23:46 -0700 +Subject: [PATCH 14/51] mb/dell: Add Latitude E6320 (Sandy Bridge) + +Mainboard is PAL70/LA-6611P. I do not physically have this system; +someone with physical access to one sent me the output of autoport which +I then modified to produce this port. I was also sent the VBT binary, +which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running +version A22 of the vendor firmware. This port has not been tested. + +The EC is the SMSC MEC5055, which seems to be compatible with the +existing MEC5035 code. As with the other Dell systems with this EC, this +board is assumed to be internally flashable using an EC command that +tells it to pull the FDO pin low on the next boot, which also tells the +vendor firmware to disable all write protections to the flash [1]. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: I5905f8c6a8dbad56e03bdeedc2179600d0c4ba46 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 11 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e6320/data.vbt | Bin 0 -> 6144 bytes + .../variants/e6320/early_init.c | 17 ++ + .../snb_ivb_latitude/variants/e6320/gpio.c | 190 ++++++++++++++++++ + .../variants/e6320/hda_verb.c | 32 +++ + .../variants/e6320/overridetree.cb | 35 ++++ + 7 files changed, 287 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index e6a21ffb99..84ffe1d33a 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -27,6 +27,12 @@ config BOARD_DELL_LATITUDE_E5520 + select BOARD_ROMSIZE_KB_6144 + select SOUTHBRIDGE_INTEL_BD82X6X + ++config BOARD_DELL_LATITUDE_E6320 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_10240 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E6420 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_10240 +@@ -67,6 +73,7 @@ config MAINBOARD_DIR + config MAINBOARD_PART_NUMBER + default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 + default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 ++ default "Latitude E6320" if BOARD_DELL_LATITUDE_E6320 + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 + default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 +@@ -82,6 +89,7 @@ config USBDEBUG_HCD_INDEX + config VARIANT_DIR + default "e5420" if BOARD_DELL_LATITUDE_E5420 + default "e5520" if BOARD_DELL_LATITUDE_E5520 ++ default "e6320" if BOARD_DELL_LATITUDE_E6320 + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 + default "e5530" if BOARD_DELL_LATITUDE_E5530 +@@ -93,7 +101,8 @@ config VGA_BIOS_ID + || BOARD_DELL_LATITUDE_E5420 + default "8086,0166" if BOARD_DELL_LATITUDE_E5530 + default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ +- || BOARD_DELL_LATITUDE_E5520 ++ || BOARD_DELL_LATITUDE_E5520 \ ++ || BOARD_DELL_LATITUDE_E6320 + default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ + || BOARD_DELL_LATITUDE_E6530 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index a3fa2b1837..ef6a1329a9 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -6,6 +6,9 @@ config BOARD_DELL_LATITUDE_E5420 + config BOARD_DELL_LATITUDE_E5520 + bool "Latitude E5520" + ++config BOARD_DELL_LATITUDE_E6320 ++ bool "Latitude E6320" ++ + config BOARD_DELL_LATITUDE_E6420 + bool "Latitude E6420" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..471a9e29da639dd496f3ecebd5d0754a9045c00b +GIT binary patch +literal 6144 +zcmeHKeP|p-6#wn*-rZ(yH@R-odPzTgZEU>S#_pv}j2iKhT+^%8_DtJw21|4GP8*0x +zyw;EYW49XozzTOX?48xuwV5_`Zb)3w)w?dSc1`nTL|NF_SMw&<<)v%g#!cH2otrzi +zb*Kq!PUMaJadUHE-`5SWCb4_6i;5Aj(6hQGK +zcq^2uUt5sS5YSMiL+CJcs0#cVOdTN|K@D>?tkF=dqenwjM^Z-^K2z~&z+xRs!o^Jx +zkUGd?>QtXw8V(I09OiMb0DZy>`=tO^#BCssw{}bkOnj=#Ic!~!6!J*{`jbEv5O4)- +zg-UBlIa$c9Pg4C;0_-wq3t+dbZfn1wBi@zhNnWx()w{Vb-G8OC_m*478gTrX3U*a1 +zHr@yrOO78dFPXES1q3mHj9 +zFXKwa)r^}Mw=nKzJjj?}>}NdBc$G29IK=pr@de`u;}}D$5~yYbw&Hlf=OF0X?I=Y$ +z$D`mgy>}U$hl}G6m&PmXveHnY5DenC!g~=E3i?HIrEpyk>_(-IsVtEqUEoqxrDFdq +zrYwhOv0o^NgW$OKN}=$7Z-w5*Vuv?T3~uuFGwP92?Qr8n0iQp=u*7rep9Q8dW#?ZI +zFly1ww^^l*+YC6t16l_{g}tVVpVZ0fDk%5+`|+*688vr-uYP8$M=#caX6OWA1Ez395U +z%xCIZibyRlE~I0-ianVaz~q|EMlL7hc1U5w?}Kekws6fyy@`e +z4NdX%L#2`A#c_N4ftGmuwbDo=incwf=WnBJk6)fYz%6Cmy>HwK$Y|iP`Y7sgjDPhQ +zR|wv367k}1g)-G@kXq(X;{Bjt998b9{cpD9zGhOQ5%$4OSMtc2(gO(fCMTS^w(6xrO#}IcK^sHgMZis^heP>uIf6|z=%Cy#)Vxvjdo7U~7*k{rU +zruB{~J}~KL(+X9Kxz*-5M>NNGSaIfXi19({d4mrk?K50@R0%Wn*PP9d(MMIzI2~RX +z)(4h&8(YL@UyKJ*)4o${n5ZGd(hDf+)cv8sSBxWen|f*u<-sgt(u+U-bkd}Tj+5@9 +zJosfSdvPo8zGnluemJg=E7A{=NQwFch>PUO1w +z=6JffnB-kQ)VLb>sSZdDrI@U2!?HLA9Mlek!*k>;&jx<)xfnBiY^I6DRt*l*`n8ly +zu!h)b?sRV1==Nf*Cw9&&i7n^9Nts>wk>adaY&E5OdW*A?iI}v+E6GGlsR<+#%jpl^ +zGzqhDjj3zr60Bgh=l{NzJp$x#fCR%*8!ZR?fC&JuvHmSr5#5VAcb(9+>sO +IzvhA80TAzedH?_b + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c +new file mode 100644 +index 0000000000..b0c4638858 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c +@@ -0,0 +1,17 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include ++ ++const struct southbridge_usb_port mainboard_usb_ports[] = { ++}; ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c +new file mode 100644 +index 0000000000..61f01816c4 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c +@@ -0,0 +1,190 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_NATIVE, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_NATIVE, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_HIGH, ++ .gpio45 = GPIO_LEVEL_LOW, ++ .gpio49 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c +new file mode 100644 +index 0000000000..2e3f7fa697 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x10280492, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x10280492), ++ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb +new file mode 100644 +index 0000000000..3bfe6b57ed +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb +@@ -0,0 +1,35 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x0492 inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00000622" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 0, 0 }, ++ { 1, 1, 1 }, ++ { 1, 0, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 0, 5 }, ++ { 1, 0, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 0, 6 }, ++ { 1, 0, 7 }, ++ }" ++ ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0015-GM45-type-CPUs-don-t-enable-alternative-SMRR.patch b/config/coreboot/default/patches/0015-GM45-type-CPUs-don-t-enable-alternative-SMRR.patch deleted file mode 100644 index 731742d3..00000000 --- a/config/coreboot/default/patches/0015-GM45-type-CPUs-don-t-enable-alternative-SMRR.patch +++ /dev/null @@ -1,173 +0,0 @@ -From 7e366e5d4d56aade1cb8de8433eb2b02cc9aceef Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Mon, 17 Apr 2023 15:49:57 +0100 -Subject: [PATCH 15/65] GM45-type CPUs: don't enable alternative SMRR - -This reverts the changes in coreboot revision: -df7aecd92643d207feaf7fd840f8835097346644 - -While this fix is *technically correct*, the one in -coreboot, it breaks rebooting as tested on several -GM45 ThinkPads e.g. X200, T400, when microcode -updates are not applied. - -Since November 2022, Libreboot includes microcode -updates by default, but it tells users how to remove -it from the ROM (with cbfstool) if they wish. - -Well, with Libreboot 20221214, 20230319 and 20230413, -mitigations present in Libreboot 20220710 (which did -not have microcode updates) do not exist. - -This patch, along with the other patch to remove PECI -support (which breaks speedstep when microcode updates -are not applied) have now been re-added to Libreboot. - -It is still best to use microcode updates by default. -These patches in coreboot are not critically urgent, -and you can use the machines with or without them, -regardless of ucode. - -I'll probably re-write this and the other patch at -some point, applying the change conditionally upon -whether or not microcode is applied. - -Pragmatism is a good thing. I recommend it. ---- - src/cpu/intel/model_1067x/model_1067x_init.c | 4 +++ - src/cpu/intel/model_1067x/mp_init.c | 26 -------------------- - src/cpu/intel/model_106cx/model_106cx_init.c | 4 +++ - src/cpu/intel/model_6ex/model_6ex_init.c | 4 +++ - src/cpu/intel/model_6fx/model_6fx_init.c | 4 +++ - 5 files changed, 16 insertions(+), 26 deletions(-) - -diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c -index 30ba2bf0c6..312046901a 100644 ---- a/src/cpu/intel/model_1067x/model_1067x_init.c -+++ b/src/cpu/intel/model_1067x/model_1067x_init.c -@@ -8,6 +8,7 @@ - #include - #include - #include -+#include - - #define MSR_BBL_CR_CTL3 0x11e - -@@ -234,6 +235,9 @@ static void model_1067x_init(struct device *cpu) - fill_processor_name(processor_name); - printk(BIOS_INFO, "CPU: %s.\n", processor_name); - -+ /* Set virtualization based on Kconfig option */ -+ set_vmx_and_lock(); -+ - /* Configure C States */ - configure_c_states(quad); - -diff --git a/src/cpu/intel/model_1067x/mp_init.c b/src/cpu/intel/model_1067x/mp_init.c -index bc53214310..72f40f6762 100644 ---- a/src/cpu/intel/model_1067x/mp_init.c -+++ b/src/cpu/intel/model_1067x/mp_init.c -@@ -43,34 +43,8 @@ static void pre_mp_smm_init(void) - smm_initialize(); - } - --#define SMRR_SUPPORTED (1 << 11) -- - static void per_cpu_smm_trigger(void) - { -- msr_t mtrr_cap = rdmsr(MTRR_CAP_MSR); -- if (cpu_has_alternative_smrr() && mtrr_cap.lo & SMRR_SUPPORTED) { -- set_feature_ctrl_vmx(); -- msr_t ia32_ft_ctrl = rdmsr(IA32_FEATURE_CONTROL); -- /* We don't care if the lock is already setting -- as our smm relocation handler is able to handle -- setups where SMRR is not enabled here. */ -- if (ia32_ft_ctrl.lo & (1 << 0)) { -- /* IA32_FEATURE_CONTROL locked. If we set it again we -- get an illegal instruction. */ -- printk(BIOS_DEBUG, "IA32_FEATURE_CONTROL already locked\n"); -- printk(BIOS_DEBUG, "SMRR status: %senabled\n", -- ia32_ft_ctrl.lo & (1 << 3) ? "" : "not "); -- } else { -- if (!CONFIG(SET_IA32_FC_LOCK_BIT)) -- printk(BIOS_INFO, -- "Overriding CONFIG(SET_IA32_FC_LOCK_BIT) to enable SMRR\n"); -- ia32_ft_ctrl.lo |= (1 << 3) | (1 << 0); -- wrmsr(IA32_FEATURE_CONTROL, ia32_ft_ctrl); -- } -- } else { -- set_vmx_and_lock(); -- } -- - /* Relocate the SMM handler. */ - smm_relocate(); - } -diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c -index 05f5f327cc..0450c2ad83 100644 ---- a/src/cpu/intel/model_106cx/model_106cx_init.c -+++ b/src/cpu/intel/model_106cx/model_106cx_init.c -@@ -7,6 +7,7 @@ - #include - #include - #include -+#include - - #define HIGHEST_CLEVEL 3 - static void configure_c_states(void) -@@ -66,6 +67,9 @@ static void model_106cx_init(struct device *cpu) - fill_processor_name(processor_name); - printk(BIOS_INFO, "CPU: %s.\n", processor_name); - -+ /* Set virtualization based on Kconfig option */ -+ set_vmx_and_lock(); -+ - /* Configure C States */ - configure_c_states(); - -diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c -index 5bd1c32815..f3bb08cde3 100644 ---- a/src/cpu/intel/model_6ex/model_6ex_init.c -+++ b/src/cpu/intel/model_6ex/model_6ex_init.c -@@ -7,6 +7,7 @@ - #include - #include - #include -+#include - - #define HIGHEST_CLEVEL 3 - static void configure_c_states(void) -@@ -105,6 +106,9 @@ static void model_6ex_init(struct device *cpu) - /* Setup Page Attribute Tables (PAT) */ - // TODO set up PAT - -+ /* Set virtualization based on Kconfig option */ -+ set_vmx_and_lock(); -+ - /* Configure C States */ - configure_c_states(); - -diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c -index 535fb8fae7..f7b05facd2 100644 ---- a/src/cpu/intel/model_6fx/model_6fx_init.c -+++ b/src/cpu/intel/model_6fx/model_6fx_init.c -@@ -7,6 +7,7 @@ - #include - #include - #include -+#include - - #define HIGHEST_CLEVEL 3 - static void configure_c_states(void) -@@ -118,6 +119,9 @@ static void model_6fx_init(struct device *cpu) - /* Setup Page Attribute Tables (PAT) */ - // TODO set up PAT - -+ /* Set virtualization based on Kconfig option */ -+ set_vmx_and_lock(); -+ - /* Configure C States */ - configure_c_states(); - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0015-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch b/config/coreboot/default/patches/0015-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch new file mode 100644 index 00000000..e2be42c9 --- /dev/null +++ b/config/coreboot/default/patches/0015-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch @@ -0,0 +1,438 @@ +From a32431d5f7574ffa6391221c7740f1739203eaa7 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Fri, 8 Mar 2024 09:27:36 -0700 +Subject: [PATCH 15/51] mb/dell: Add Latitude E6220 (Sandy Bridge) + +Mainboard is codenamed Vida. I do not physically have this system; +someone with physical access to one sent me the output of autoport which +I then modified to produce this port. The VBT was obtained using +intelvbttool while running version A14 (latest available version) of the +vendor firmware. + +Tested and found to boot as part of a libreboot build based on upstream +coreboot commit b7341da191 with additional patches, though these do not +appear to affect SNB/IVB. The base E6430 patch was tested against +coreboot main. + +The EC is the SMSC MEC5055, which seems to be compatible with the +existing MEC5035 code. As with the other Dell systems with this EC, this +board is assumed to be internally flashable using an EC command that +tells it to pull the FDO pin low on the next boot, which also tells the +vendor firmware to disable all write protections to the flash [1]. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: I570023b0837521b75aac6d5652c74030c06b8a4c +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 9 + + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e6220/data.vbt | Bin 0 -> 3985 bytes + .../variants/e6220/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e6220/gpio.c | 192 ++++++++++++++++++ + .../variants/e6220/hda_verb.c | 32 +++ + .../variants/e6220/overridetree.cb | 37 ++++ + 7 files changed, 287 insertions(+) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 84ffe1d33a..baa83baa41 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -27,6 +27,12 @@ config BOARD_DELL_LATITUDE_E5520 + select BOARD_ROMSIZE_KB_6144 + select SOUTHBRIDGE_INTEL_BD82X6X + ++config BOARD_DELL_LATITUDE_E6220 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_10240 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E6320 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_10240 +@@ -73,6 +79,7 @@ config MAINBOARD_DIR + config MAINBOARD_PART_NUMBER + default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 + default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 ++ default "Latitude E6220" if BOARD_DELL_LATITUDE_E6220 + default "Latitude E6320" if BOARD_DELL_LATITUDE_E6320 + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 +@@ -89,6 +96,7 @@ config USBDEBUG_HCD_INDEX + config VARIANT_DIR + default "e5420" if BOARD_DELL_LATITUDE_E5420 + default "e5520" if BOARD_DELL_LATITUDE_E5520 ++ default "e6220" if BOARD_DELL_LATITUDE_E6220 + default "e6320" if BOARD_DELL_LATITUDE_E6320 + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 +@@ -102,6 +110,7 @@ config VGA_BIOS_ID + default "8086,0166" if BOARD_DELL_LATITUDE_E5530 + default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ + || BOARD_DELL_LATITUDE_E5520 \ ++ || BOARD_DELL_LATITUDE_E6220 \ + || BOARD_DELL_LATITUDE_E6320 + default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ + || BOARD_DELL_LATITUDE_E6530 +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index ef6a1329a9..349ee7f79e 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -6,6 +6,9 @@ config BOARD_DELL_LATITUDE_E5420 + config BOARD_DELL_LATITUDE_E5520 + bool "Latitude E5520" + ++config BOARD_DELL_LATITUDE_E6220 ++ bool "Latitude E6220" ++ + config BOARD_DELL_LATITUDE_E6320 + bool "Latitude E6320" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..548075a74500b5d159108089ee29cff802d07db7 +GIT binary patch +literal 3985 +zcmdT{eP|p-6#wn*-rZ(yH@R-odPzTgZQ6LXjonL|7&YQ0xu#d`$C=h}21|4GP8*0x +zyjE@hv0Dv(P?c0g{G(_DMJZ@22r8oZ0U9lcR8a)~s33wOSg|T<^?b8?XBzL?#)6`A +z{N~Nfd-LYan>TOv7WZ{+rcIq264!S1u1&02-MpSC3mf}u-r~BvbgkXEX=|c$bLZBs +zbsM{{q9-s1nVR3f2C|A`nJsqvC7UwC+1=angV`H%w4saofx<^KL=Lc`x +zzLTQeOW7vdZsuwwtsUOU>vxajM=zqzp&{y(GCQa@weIb%fzF6`uwy)UhaB+ynus +zBRr-~^|__t=m5fD9tR81r@XLV3UEc-2I6>o`;@@MXS$rj)&)r+pA?|K2vh+9SHM=N +zw3d{Uh1~iK)juV`E`v4?cFU@^_DehBU5TFLmFrTyoBPuJ*ExIdxO1!lC!eceSG8i} +z&Aivl*T2}Cf;*vEJvsN-nR!WWDm8M^Zmcltu96wMRudvHXLxn;xh~EqEM^Gr}m&=vHbwRKjl{%)fM2d8tOI4MM{l!dK +z4$)%2P!LDJaqX2t;s4$Wy@Q1gZ=x97KlhsvF9`g6&TYocZ_JQN=A1hUE#+kAD@E9jJd7%}~ +zMLIYMDVoel8h1}$+_YJF%DJ&-O)X~`ZoroouO-yDsj)OrPU{{+ph4LJKdD;Bi3a3T +zbe?Tf8&elW+H+t;5$y~|nhq{o@?k1^-Hg%jhcu{xJyzvgk`0m*Te#GQe$ +z2IjOP{U&oF$`&WsuJN2!=fTnT^W)PwhnW-Ya3)3%H!`OUfy6?#V9r%+wCY}TU0!Cl +z*kjeex}MZl_aWVoxhXfp&Ur~>>k;onlO4II%~KY!FT|r)!;agdwcf~rXIAVwc6CEj +zJpE{CBzZ;L-gdYp9)GC8f@wZ%=YBfkLb0_gZP%us?_tgG3TXJ7BDbWb~V23Mt{QT(?mOc#ihbo#YtY#rD +z7PLiJBSP#J^tiB|7vdE`p9|}IA$}9o7_wSJ;))RELe^~|u{T6dhpd-F;;j&U6|#N} +z3BN(h4C``3tTE^&!`fqrdks2dSZ^5Oh(X^Omdc+rCapBB)uz~J(k-TSw<-3U^rC6K +zYl;s|`q{KX)nazFdEs%*@f}l~SsY?~kb2(WgGl=fm!43>4I&2(k1$iaK?FYVZ}~h~1{1T|;>=%b4`yk3XF>siEVHyC@HS +z8OvVW%DeB`K&~H7>f?&^gQU_A0oM;p0b*k61j!x*S5X(-unS`9rZ +zG}=vb+R*x})DSq-Q7;uJwKLPuG`Ej6G}#nch4dSqhHo0B2Gq%HbgCyS+pwZ3{?fph +z!Jo*Dxcw7v7a#rIU2IRmVn4KE$x~88+a7J4zd|_!%xo9z$+P;Q6qA*AQ5FvzlPW^f +zY&aJUhO1#_o~&$x>1qJKGpC+K<(u_&1197VVWxipk10ERAEpLG3^|JWI~DYG*_Qk)fwt)g^KZ*f*K5tEj9C7Ea`HGyPe8U4wd +nX2Iz@%Q6UTm;}-X%j^D0i1fiT)I6)4TdrsMY}`L( ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c +new file mode 100644 +index 0000000000..2306e4cf0a +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c +@@ -0,0 +1,192 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_NATIVE, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio1 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_HIGH, ++ .gpio45 = GPIO_LEVEL_LOW, ++ .gpio49 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c +new file mode 100644 +index 0000000000..0c69f0bd0e +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x102804a9, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x102804a9), ++ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb +new file mode 100644 +index 0000000000..9faf27e27b +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb +@@ -0,0 +1,37 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x04a9 inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x0000046a" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }" ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 0, 0 }, ++ { 1, 1, 1 }, ++ { 1, 0, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 0, 5 }, ++ { 1, 0, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 0, 6 }, ++ { 1, 0, 7 }, ++ }" ++ ++ device ref pcie_rp4 off end ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0016-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch b/config/coreboot/default/patches/0016-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch new file mode 100644 index 00000000..7d2133ef --- /dev/null +++ b/config/coreboot/default/patches/0016-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch @@ -0,0 +1,436 @@ +From 0889cc6b6f62cba616feff5ae8558be31f298069 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Fri, 8 Mar 2024 09:33:03 -0700 +Subject: [PATCH 16/51] mb/dell: Add Latitude E6330 (Ivy Bridge) + +Mainboard is QAL70/LA-7741P. I do not physically have this system; +someone with physical access to one sent me the output of autoport which +I then modified to produce this port. I was also sent the VBT binary, +which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running +version A21 of the vendor firmware. This port has not been tested. + +The EC is the SMSC MEC5055, which seems to be compatible with the +existing MEC5035 code. As with the other Dell systems with this EC, this +board is assumed to be internally flashable using an EC command that +tells it to pull the FDO pin low on the next boot, which also tells the +vendor firmware to disable all write protections to the flash [1]. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: I827826e9ff8a9a534c50250458b399104478e06c +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 11 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e6330/data.vbt | Bin 0 -> 6144 bytes + .../variants/e6330/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e6330/gpio.c | 192 ++++++++++++++++++ + .../variants/e6330/hda_verb.c | 32 +++ + .../variants/e6330/overridetree.cb | 37 ++++ + 7 files changed, 288 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index baa83baa41..49bf225fe2 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -56,6 +56,12 @@ config BOARD_DELL_LATITUDE_E5530 + select BOARD_ROMSIZE_KB_12288 + select SOUTHBRIDGE_INTEL_C216 + ++config BOARD_DELL_LATITUDE_E6330 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_12288 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select SOUTHBRIDGE_INTEL_C216 ++ + config BOARD_DELL_LATITUDE_E6430 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_12288 +@@ -84,6 +90,7 @@ config MAINBOARD_PART_NUMBER + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 + default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 ++ default "Latitude E6330" if BOARD_DELL_LATITUDE_E6330 + default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 + default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 + +@@ -101,13 +108,15 @@ config VARIANT_DIR + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 + default "e5530" if BOARD_DELL_LATITUDE_E5530 ++ default "e6330" if BOARD_DELL_LATITUDE_E6330 + default "e6430" if BOARD_DELL_LATITUDE_E6430 + default "e6530" if BOARD_DELL_LATITUDE_E6530 + + config VGA_BIOS_ID + default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \ + || BOARD_DELL_LATITUDE_E5420 +- default "8086,0166" if BOARD_DELL_LATITUDE_E5530 ++ default "8086,0166" if BOARD_DELL_LATITUDE_E5530 \ ++ || BOARD_DELL_LATITUDE_E6330 + default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ + || BOARD_DELL_LATITUDE_E5520 \ + || BOARD_DELL_LATITUDE_E6220 \ +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index 349ee7f79e..d6fc8eb224 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -21,6 +21,9 @@ config BOARD_DELL_LATITUDE_E6520 + config BOARD_DELL_LATITUDE_E5530 + bool "Latitude E5530" + ++config BOARD_DELL_LATITUDE_E6330 ++ bool "Latitude E6330" ++ + config BOARD_DELL_LATITUDE_E6430 + bool "Latitude E6430" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..18856746656058651c571ecbb3708e0543b19d62 +GIT binary patch +literal 6144 +zcmeHKU2GiH75-*tc6WAmW_LYygMSkDB*E^Q*zv5f7dLg)@$NQV2a{}!yImnfyvQ4D +z;n-$v0!RpNi<_o@ktI-@2a590stC0zRi%iRR%stvi&hAs3RvNXNl&Dsr*z_6HAP5GJeST +znX2JD;{xLa#;c6KGychVn-L6YXkv6Qx)}Y8&ok1DI~ZSM6dCt39%QUAzRh@o@gqjy +zL0qZ&DhN8ZR3xu$a$Cd{oasU3DNp{CCl6f~PYlq!Hte;Ia0^wn8Vut7>Wl1)s`^E- +z1DhGxzr8&7h}dMJ3~YBe;)!vVf-T&?{PoMvvRR{!67;Xhz^g^loX +zja+*c-KJJoxbsm3pTE4THs`cgD{Pt+ga3en-i$P#9Wsra(oqRMr;H$4{gxr)9eF(x +zg0v@a7aj}rA^Kf#sNb*>at^>P)5li%ycOq*4e;3~RUj$i1e8=rHi&Y_gP4= +zxz9^%q0dLXqC&Bq<&sDScZwvatjRxB=rcJJiYb?w#4Iy2KTk1F6T>T}E@(DNGa>5R +z7&Yv)JdHrRI};pfsKLVj=FE=U*=*T4#ncVktknoGelT||SDY`+9WI_IZE`_>@wb<-RI-lu(_~Oy_Zo6={Cdq!uw(fmyz_u^cB&~5IS7g`U +zdUC}N$J5-C)|`CfUO+?xptr@*hJW$ZhBZk%JaMh_<8!ZGj)z*WU9fcg2`>dT##_?q +z=Ksx}uxo3jTHTq%E1}97UECE@r}nt3I=3R(HOL7jNg>teSM-g$aU#`3jk}#qh;D?6 +zw=CYuA2#mS+vU%0P&u8RCn4)$8VH-2uy#01%VG0WSX&Fz`LMYj)?NgH_zzWS)G2Pn=k3wYdU|DnWmxbG$>`5lZJMWL92%O14BD!(C-cNFNXFH +zgVc!G9?@=&(4mNVcSJiLq3=b^rz6@k5qdFVUW{m$A{2|7d!kxz)VSrcQt@4sDoq^f +z98hXm=YS~qbfiR|LbzHLa*mLXlH${^b4c9%>9%)HO-?LA1gT0mlz!M}8&;(;^x| +z*H22;juB|7F+k?y(_2~3@STqQ@f^sqD2c8g3x>ciM%siMq~;pKwfE57kw2K@ +z!-ZN0QTVOP@aA5@fEGKjy2+D`t?2KzpPyRQ`JcmHJoc(<#hvyF +zewtgef*II~y;k>*B!+(8*blXsY-~kcJa9zG2yfcMCt+|-0ex$pY`h1<*#rEv=~*<+ +ztV``Um!q33-Aap9fUshX^N~GS2@X3^U9+MwgYQ74^?~6&yU^#oY#cvC9R_}P2d ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c +new file mode 100644 +index 0000000000..777570765a +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c +@@ -0,0 +1,192 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_NATIVE, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_OUTPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio28 = GPIO_LEVEL_LOW, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++ .gpio30 = GPIO_RESET_RSMRST, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio13 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_INPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_HIGH, ++ .gpio45 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c +new file mode 100644 +index 0000000000..804733b172 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76df, /* Codec Vendor / Device ID: IDT */ ++ 0x10280533, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x10280533), ++ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862806, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb +new file mode 100644 +index 0000000000..4125159367 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb +@@ -0,0 +1,37 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x0533 inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00001312" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "usb_port_config" = "{ ++ { 1, 2, 0 }, ++ { 1, 0, 0 }, ++ { 1, 0, 1 }, ++ { 1, 1, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 2, 3 }, ++ { 1, 2, 3 }, ++ { 1, 2, 4 }, ++ { 1, 1, 4 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 2, 6 }, ++ { 1, 0, 6 }, ++ }" ++ ++ device ref xhci on ++ register "superspeed_capable_ports" = "0x0000000f" ++ register "xhci_overcurrent_mapping" = "0x00000c03" ++ register "xhci_switchable_ports" = "0x0000000f" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0016-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch b/config/coreboot/default/patches/0016-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch deleted file mode 100644 index 040834db..00000000 --- a/config/coreboot/default/patches/0016-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch +++ /dev/null @@ -1,28 +0,0 @@ -From b925e95cc9d750c56fdbfbd1838b77339c124139 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Sat, 6 May 2023 15:53:41 -0600 -Subject: [PATCH 16/65] mb/dell/e6400: Enable 01.0 device in devicetree for - dGPU models - -Change-Id: I9b8e5d3cd1e1f64dc87b682b1e045b6342924aed -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/e6400/devicetree.cb | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/e6400/devicetree.cb -index bb954cbd7b..e9f3915d17 100644 ---- a/src/mainboard/dell/e6400/devicetree.cb -+++ b/src/mainboard/dell/e6400/devicetree.cb -@@ -19,7 +19,7 @@ chip northbridge/intel/gm45 - ops gm45_pci_domain_ops - - device pci 00.0 on end # host bridge -- device pci 01.0 off end -+ device pci 01.0 on end - device pci 02.0 on end # VGA - device pci 02.1 on end # Display - device pci 03.0 on end # ME --- -2.39.5 - diff --git a/config/coreboot/default/patches/0017-Remove-warning-for-coreboot-images-built-without-a-p.patch b/config/coreboot/default/patches/0017-Remove-warning-for-coreboot-images-built-without-a-p.patch deleted file mode 100644 index eb76118f..00000000 --- a/config/coreboot/default/patches/0017-Remove-warning-for-coreboot-images-built-without-a-p.patch +++ /dev/null @@ -1,39 +0,0 @@ -From f440b426378314bfbc0f397fdd9bd5bd68d81483 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Fri, 12 May 2023 19:55:15 -0600 -Subject: [PATCH 17/65] Remove warning for coreboot images built without a - payload - -I added this in upstream to prevent people from accidentally flashing -roms without a payload resulting in a no boot situation, but in -libreboot lbmk handles the payload and thus this warning always comes -up. This has caused confusion and concern so just patch it out. ---- - payloads/Makefile.mk | 13 +------------ - 1 file changed, 1 insertion(+), 12 deletions(-) - -diff --git a/payloads/Makefile.mk b/payloads/Makefile.mk -index 5f988dac1b..516133880f 100644 ---- a/payloads/Makefile.mk -+++ b/payloads/Makefile.mk -@@ -50,16 +50,5 @@ distclean-payloads: - print-repo-info-payloads: - -$(foreach payload, $(PAYLOADS_LIST), $(MAKE) -C $(payload) print-repo-info 2>/dev/null; ) - --ifeq ($(CONFIG_PAYLOAD_NONE),y) --show_notices:: warn_no_payload --endif -- --warn_no_payload: -- printf "\n\t** WARNING **\n" -- printf "coreboot has been built without a payload. Writing\n" -- printf "a coreboot image without a payload to your board's\n" -- printf "flash chip will result in a non-booting system. You\n" -- printf "can use cbfstool to add a payload to the image.\n\n" -- - .PHONY: force-payload coreinfo nvramcui --.PHONY: clean-payloads distclean-payloads print-repo-info-payloads warn_no_payload -+.PHONY: clean-payloads distclean-payloads print-repo-info-payloads --- -2.39.5 - diff --git a/config/coreboot/default/patches/0017-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch b/config/coreboot/default/patches/0017-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch new file mode 100644 index 00000000..412b8471 --- /dev/null +++ b/config/coreboot/default/patches/0017-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch @@ -0,0 +1,440 @@ +From 84d7f3201eb4492acd7d290a02d19c4850c85791 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Thu, 26 Oct 2017 21:26:43 +0800 +Subject: [PATCH 17/51] mb/dell: Add Latitude E6230 (Ivy Bridge) + +This was adapted from CB:22693 from Iru Cai, which was based on +autoport. I do not physically have this system. Someone with physical +access to an E6230 running version A11 of the vendor firmware sent me +the VBT after running the command `intelvbttool --inlegacy --outvbt +data.vbt`. This new version of the port has not yet been tested. + +The EC is the SMSC MEC5055, which seems to be compatible with the +existing MEC5035 code. As with the other Dell systems with this EC, this +board is assumed to be internally flashable using an EC command that +tells it to pull the FDO pin low on the next boot, which also tells the +vendor firmware to disable all write protections to the flash [1]. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Original-Change-Id: I8cdc01e902e670310628809416290045c2102340 +Change-Id: I32927beea7c29b96a851ab77ed15b0160f16d369 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 11 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e6230/data.vbt | Bin 0 -> 4280 bytes + .../variants/e6230/early_init.c | 12 ++ + .../snb_ivb_latitude/variants/e6230/gpio.c | 193 ++++++++++++++++++ + .../variants/e6230/hda_verb.c | 32 +++ + .../variants/e6230/overridetree.cb | 40 ++++ + 7 files changed, 290 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 49bf225fe2..f6e097930b 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -56,6 +56,12 @@ config BOARD_DELL_LATITUDE_E5530 + select BOARD_ROMSIZE_KB_12288 + select SOUTHBRIDGE_INTEL_C216 + ++config BOARD_DELL_LATITUDE_E6230 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_12288 ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select SOUTHBRIDGE_INTEL_C216 ++ + config BOARD_DELL_LATITUDE_E6330 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_12288 +@@ -90,6 +96,7 @@ config MAINBOARD_PART_NUMBER + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 + default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 ++ default "Latitude E6230" if BOARD_DELL_LATITUDE_E6230 + default "Latitude E6330" if BOARD_DELL_LATITUDE_E6330 + default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 + default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 +@@ -108,6 +115,7 @@ config VARIANT_DIR + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 + default "e5530" if BOARD_DELL_LATITUDE_E5530 ++ default "e6230" if BOARD_DELL_LATITUDE_E6230 + default "e6330" if BOARD_DELL_LATITUDE_E6330 + default "e6430" if BOARD_DELL_LATITUDE_E6430 + default "e6530" if BOARD_DELL_LATITUDE_E6530 +@@ -121,7 +129,8 @@ config VGA_BIOS_ID + || BOARD_DELL_LATITUDE_E5520 \ + || BOARD_DELL_LATITUDE_E6220 \ + || BOARD_DELL_LATITUDE_E6320 +- default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ ++ default "8086,0166" if BOARD_DELL_LATITUDE_E6230 \ ++ || BOARD_DELL_LATITUDE_E6430 \ + || BOARD_DELL_LATITUDE_E6530 + + endif +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index d6fc8eb224..cb7bbd5cdb 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -21,6 +21,9 @@ config BOARD_DELL_LATITUDE_E6520 + config BOARD_DELL_LATITUDE_E5530 + bool "Latitude E5530" + ++config BOARD_DELL_LATITUDE_E6230 ++ bool "Latitude E6230" ++ + config BOARD_DELL_LATITUDE_E6330 + bool "Latitude E6330" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..45ce8f435eea647a0bddaab3fd1e9282c87afc66 +GIT binary patch +literal 4280 +zcmdT{Yiu0V75-*tAG5PFyX&zDekA7P<*tbx&o1`j23L%CmvkLWvN7(mLa6alZ?J`9 +zo3#m4YVlG`2;w12Ajppt~|mMp8L%`XU@4ZyCa_(r`z|Z`bP4p-rEkOMn-R;Ntk#o`b)0sOKRl6 +z?T0eMZS*@LZWP#hD{> +zSLslxYH@j~%H#VLx+<8~!;a@$n+>Q%xHrQ8KGI21_iL4sI +zF*$}m$R7Mr9z@Z*ir@Q9eClsSmC+t(g`q~VQ&nIxZenav_^Buc78s8*o@e|t}g +z1Z-O>lG`>pEuvmL-HpmgSANo!2hWQq2B>Zua$8%tfvQ>!1n@=m9ri_4`H|Rx#SH9n +zDdRF_-FDP&WjW`L$GK%a6x?yO8l2!^g0HJrtA7TknNzCO?|U!wCv2^-5pJ%LW6!+P +z)anX%E>`gP%3Er4c6+J9x=Atk1{Abrr1|WSY3P`SO5j!R5F*vbbQ%AaSHnR_+x&Op +zA%8C-Pk=-Hs+FL90B)E*y3FUTIA1J)&pxRF$tzAkNr7a6_-8v$@j~G~3keqYd5I;y8g^P< +zfWO_D2@EyVVBxnpv*}hgTeeRzWz9BoISh>M%^k`WXG=5ti$_Wu99)~lWE-qubeXNk +zla9Tu=Jhyn5T<3$H#?Hfm-`+(d$7IBDx9cEvNv1i-LEDr>r7438bfkPcKod+mwd22 +z%{^(w&NuG)MKl0fTMTXZFJEm~k;KCj*D60g=j!2jsP){tzvOjAJ2nB}At~#%f4?FGT+d8LFnXXtYN&Mm06B +z(JwUPX-z$$(d(M=uBLvh@h6#K=;~&jQo1p&t3TCgSvQ{3)l)jXr5hjW>fd!z!bW>o +z-4UjJVdJi_dN@o^hK(1(>dRqzCv2PztLMTLjTqY^YEMMJ{=B#1IV)9~IMg|yl(NPF +zQSfMX`?(b5)))B!zjy0B$ua20CCLTPl^IS&2=T&Zid9-1*K{VAJP?rxjYC+zGDCe* +ziQI7VfF17@3`3W-qCN>lPC5CL_c?p0FTGXaGB3i~{ZE +zr=QtIprytDnU7C*Wj%x0k)O{Y%nUnl%}K%F|J_iVaD&ubW4Qbtx;pZEb9}f^Yd;Ea +zI1Ha{7Yt~z{LAY++1QG{F6*_4WsUziY{x?%I9B}i5-Tphhk8FGm%Jf!3d-ysG_9>uk%#)4xpxb+ZkJdel#+h}l9j9`1 +zt*M!5u?i4YtZ+WECo6$LJF06|G-mMZskGiV*lQJf-ItB+hltIsId@e& +z-cNvr(fgI)K*zkikg6TDJi?^}ghc*U*%A%EGg +Y$$8Z}9a~<{Q@y10T!W`-d%n2+Kj)*Kg#Z8m + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c +new file mode 100644 +index 0000000000..24c1b32467 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c +@@ -0,0 +1,12 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c +new file mode 100644 +index 0000000000..c07e4b1c56 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c +@@ -0,0 +1,193 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_NATIVE, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_OUTPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_OUTPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio17 = GPIO_LEVEL_HIGH, ++ .gpio28 = GPIO_LEVEL_LOW, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++ .gpio30 = GPIO_RESET_RSMRST, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio13 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_GPIO, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio45 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_INPUT, ++ .gpio51 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_HIGH, ++ .gpio45 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c +new file mode 100644 +index 0000000000..f6876f9e09 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x111d76df, /* Codec Vendor / Device ID: IDT */ ++ 0x10280532, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x10280532), ++ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862806, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb +new file mode 100644 +index 0000000000..3a0fa720da +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb +@@ -0,0 +1,40 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x0532 inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x000009e9" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 0, 1 }, ++ { 1, 2, 1 }, ++ { 1, 0, 2 }, ++ { 1, 0, 2 }, ++ { 1, 0, 3 }, ++ { 1, 1, 3 }, ++ { 1, 2, 4 }, ++ { 1, 1, 4 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 2, 6 }, ++ { 1, 0, 6 }, ++ }" ++ ++ device ref xhci on ++ register "superspeed_capable_ports" = "0x0000000f" ++ register "xhci_overcurrent_mapping" = "0x00000c03" ++ register "xhci_switchable_ports" = "0x0000000f" ++ end ++ device ref sata1 on ++ register "sata_port_map" = "0x31" ++ end ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0018-HACK-Disable-coreboot-related-BL31-features.patch b/config/coreboot/default/patches/0018-HACK-Disable-coreboot-related-BL31-features.patch new file mode 100644 index 00000000..9592215d --- /dev/null +++ b/config/coreboot/default/patches/0018-HACK-Disable-coreboot-related-BL31-features.patch @@ -0,0 +1,28 @@ +From ec27f5414c78d493ec7be4cd055ac877ce9ea178 Mon Sep 17 00:00:00 2001 +From: Alper Nebi Yasak +Date: Thu, 22 Jun 2023 16:44:27 +0300 +Subject: [PATCH 18/51] HACK: Disable coreboot related BL31 features + +I don't know why, but removing this BL31 make argument lets gru-kevin +power off properly when shut down from Linux. Needs investigation. +--- + src/arch/arm64/Makefile.mk | 3 --- + 1 file changed, 3 deletions(-) + +diff --git a/src/arch/arm64/Makefile.mk b/src/arch/arm64/Makefile.mk +index cb43897efd..a9e5ff399a 100644 +--- a/src/arch/arm64/Makefile.mk ++++ b/src/arch/arm64/Makefile.mk +@@ -173,9 +173,6 @@ BL31_MAKEARGS += LOG_LEVEL=40 + # Always enable crash reporting, even on a release build + BL31_MAKEARGS += CRASH_REPORTING=1 + +-# Enable coreboot-specific features like CBMEM console support +-BL31_MAKEARGS += COREBOOT=1 +- + # Avoid build/release|build/debug distinction by overriding BUILD_PLAT directly + BL31_MAKEARGS += BUILD_PLAT="$(BL31_BUILD)" + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0018-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch b/config/coreboot/default/patches/0018-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch deleted file mode 100644 index 4d8f0c21..00000000 --- a/config/coreboot/default/patches/0018-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch +++ /dev/null @@ -1,430 +0,0 @@ -From e4509a2d3204d8798cc48be37f33e43d07ff5e3b Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Sat, 19 Aug 2023 16:19:10 -0600 -Subject: [PATCH 18/65] mb/dell: Add Latitude E6530 (Ivy Bridge) - -Mainboard is QALA0/LA-7761P (UMA). The version with a Nvidia dGPU was -not tested. I do not physically have this system; someone with physical -access to one sent me the output of autoport which I then modified to -produce this port. - -I was also sent the vbios obtained using intel_bios_dumper while running -version A22 of the vendor firmware, which I then processed using -`intelvbttool --inoprom vbios.bin --outvbt data.vbt` to obtain data.vbt. - -This was originally tested and found to be working as a standalone board -port in Libreboot, though this variant based port in upstream coreboot -has not been tested. - -This can be internally flashed by sending a command to the EC, which -causes the EC to pull the FDO pin low and the firmware to skip setting -up any chipset based write protections [1]. The EC is the SMSC MEC5055, -which seems to be compatible with the existing MEC5035 code. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: I9fcd73416018574f8934962f92c8222d0101cb71 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 8 + - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e6530/data.vbt | Bin 0 -> 4280 bytes - .../variants/e6530/early_init.c | 14 ++ - .../snb_ivb_latitude/variants/e6530/gpio.c | 192 ++++++++++++++++++ - .../variants/e6530/hda_verb.c | 32 +++ - .../variants/e6530/overridetree.cb | 37 ++++ - 7 files changed, 286 insertions(+) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index be9ac37845..03377275f0 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -23,6 +23,12 @@ config BOARD_DELL_LATITUDE_E6430 - select MAINBOARD_USES_IFD_GBE_REGION - select SOUTHBRIDGE_INTEL_C216 - -+config BOARD_DELL_LATITUDE_E6530 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_12288 -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select SOUTHBRIDGE_INTEL_C216 -+ - if BOARD_DELL_SNB_IVB_LATITUDE_COMMON - - config DRAM_RESET_GATE_GPIO -@@ -33,6 +39,7 @@ config MAINBOARD_DIR - - config MAINBOARD_PART_NUMBER - default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 -+ default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 - - config OVERRIDE_DEVICETREE - default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" -@@ -42,6 +49,7 @@ config USBDEBUG_HCD_INDEX - - config VARIANT_DIR - default "e6430" if BOARD_DELL_LATITUDE_E6430 -+ default "e6530" if BOARD_DELL_LATITUDE_E6530 - - config VGA_BIOS_ID - default "8086,0166" -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index 183252630a..d89185d670 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -2,3 +2,6 @@ - - config BOARD_DELL_LATITUDE_E6430 - bool "Latitude E6430" -+ -+config BOARD_DELL_LATITUDE_E6530 -+ bool "Latitude E6530" -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..af64a913d521fe240ce30e114e90fe75d3841bbc -GIT binary patch -literal 4280 -zcmdT{U2GiH75-*te`aTAcGqJQY$rA+e`ZbWcy_TDH@NC}cbl$*NjAn^RtPm->J7GV -zY_m3jN`RN*h9FvG3Do9+qP$c^s1;PLB3@br9>Ag%La5?TLP`-2DDaR65U2_)=g!QU -zIJ+cPr4+cc-@WIad+wQY&YW{+c1J!nPPgn&^^N3Hy*D37jg0=7CSl@*=mXr>x75gi -zTMlK0$A=H4Mh~QKqCa92jz_;d3rtFqp(o-4gCnzxrJ2}Rw@^!haWpFv -zr&_=Q6YubieL}zoiJ0a+c+(bGwFN5g1pz;^rGP1sM+lHB@UAPM2&F=RB&yv@$caXF -ze~Io&3CQe=cMHr!e{yiokd?~p&F&k`jg99Ex7}WO=$8*Kx8wXv4eSa_CJqKVkyRr& -zCdcqs*@M5!gD84e@fW{|5B#mDGTH;JFw`h^stQcTjf@V3pNe8&f$=NG?-+klRGea* -zX1vOHi}4@EM~qJyfuM>e#%9J&Mjzt`j5OnB#;uGZ<1WTMj3vgSj3*esXZY{I`KqUa -zfbB~~a>piTMAVDNyHR<{0{F7}8pool{7_h6u?7yg -zlyNm>-Eq_&WjW{0$9ZHq6x?~W8l2#1g0CyrtN#R-nbWG(?>iNG1zRiZgj;Lm_%rVe -zwZ6i{g#sR5xudpbj~5H9TNIQ3gMikIG@l(Z4IR@^2|Vu|LZteLF5@$KH5`Pr&3_vn -z^!Fn27&z6hSPR+*;D*&lm-)OE=ZgjK*(X&XdBq7RDUd7>|Lou?UMNg6lVCB;TPz{Z -zN4-~p*Rr=uq8OYdlAy38{}dt5%2}aUax{}zWzDRgmsn2|!)=Bp)U35;Ld3H+Ye=*_ -z4S&0{5*TVI!OU-SWz$XUwrrnb%9?NHau^uhn>&;%&X#8O7mt)SIJr8D$u?NS=rUW6 -zCmnxV&FgUDAWX}gZ+1AH&-C4Q=3sl5RX9=OWPfCtcRZi4tkX44YYfRH*@?H7T=Kz= -zG*i-wU2jbJMK%ChTMTXZFJEm~k;KCj*D60g=j!2ns8Q`g%jSRK^?=IwL^|I5-K2zH -z8*A0-mL%Q`R#xatM^u^E=IrX+2&bc;3rv!NipS^G*6zlIRAV(JJDU($OBHuptd&1( -zoNu>t*Q}|siS8#MYavR6j7&(~AEL#OaV(^+gy>YrSPiLfgy{2-p=xT2Mtd}4R8#XB -z-LDysYw8J&{-GJKYwEiif07x7u5QsOr5oeA`ZJxDb>p|XdQzvCb>nSaeP1UfY_x~f -z9bwuRHf|5Ahr{&iu<>+QeI`t=g^e>|^=z1;5o23K?TP5uo%2>aXQWCKr#dH;Qr0*j -z3LecKKarw5`Xblzd$&H4oP%y&l3egyUc<=TGXaGC^5Cz)J -z4?eb?Kub*nWYdmhV-4?jJW -zjd{Tu*o*CE*QO)}{_J>haU5zn+1QJ^eBg|d5n5-%|DwS@1+yaZ_2@KjK>)nIBR-xB@+1PQ2*c$lV?Z13o -zbX%CHpm`!1Z4$d28~9k{rfu-0w@xg6{q!u2{)Dm_))4RK$?#7P*t7V+g_9d -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c -new file mode 100644 -index 0000000000..777570765a ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c -@@ -0,0 +1,192 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_GPIO, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_GPIO, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_NATIVE, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio1 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio3 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_OUTPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio28 = GPIO_LEVEL_LOW, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+ .gpio30 = GPIO_RESET_RSMRST, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio13 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_INPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_HIGH, -+ .gpio45 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c -new file mode 100644 -index 0000000000..3ebccff81d ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76df, /* Codec Vendor / Device ID: IDT */ -+ 0x10280535, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x10280535), -+ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862806, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb -new file mode 100644 -index 0000000000..8b9c82fba4 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb -@@ -0,0 +1,37 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x0535 inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x00000251" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 1, 1 }, -+ { 1, 1, 1 }, -+ { 1, 1, 2 }, -+ { 1, 1, 2 }, -+ { 1, 0, 3 }, -+ { 1, 1, 3 }, -+ { 1, 1, 4 }, -+ { 1, 1, 4 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 2, 6 }, -+ { 1, 2, 6 }, -+ }" -+ -+ device ref xhci on -+ register "superspeed_capable_ports" = "0x0000000f" -+ register "xhci_overcurrent_mapping" = "0x00000c03" -+ register "xhci_switchable_ports" = "0x0000000f" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0019-dell-e6430-use-ME-Soft-Temporary-Disable.patch b/config/coreboot/default/patches/0019-dell-e6430-use-ME-Soft-Temporary-Disable.patch new file mode 100644 index 00000000..b3d2d12c --- /dev/null +++ b/config/coreboot/default/patches/0019-dell-e6430-use-ME-Soft-Temporary-Disable.patch @@ -0,0 +1,30 @@ +From a15b59616e00c43c05d7853080859d4aefe26c5d Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Sun, 5 Nov 2023 11:41:41 +0000 +Subject: [PATCH 19/51] dell/e6430: use ME Soft Temporary Disable + +i overlooked this. it's set on other boards. + +we use me_cleaner anyway, and we set the hap bit, but +this additional setting takes effect even if the ME +region is unaltered. it's just another layer of +disablement, to absolutely ensure Intel ME is not alive + +Signed-off-by: Leah Rowe +--- + src/mainboard/dell/snb_ivb_latitude/cmos.default | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/mainboard/dell/snb_ivb_latitude/cmos.default b/src/mainboard/dell/snb_ivb_latitude/cmos.default +index 2a5b30f2b7..279415dfd1 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/cmos.default ++++ b/src/mainboard/dell/snb_ivb_latitude/cmos.default +@@ -6,4 +6,4 @@ bluetooth=Enable + wwan=Enable + wlan=Enable + sata_mode=AHCI +-me_state=Normal ++me_state=Disabled +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0019-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch b/config/coreboot/default/patches/0019-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch deleted file mode 100644 index 23eef96f..00000000 --- a/config/coreboot/default/patches/0019-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch +++ /dev/null @@ -1,430 +0,0 @@ -From cfac9aa347e13065c2e24d62091636cc4d0e56be Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Wed, 31 Jan 2024 22:57:07 -0700 -Subject: [PATCH 19/65] mb/dell: Add Latitude E5530 (Ivy Bridge) - -Mainboard is QXW10/LA-7902P (UMA). I do not physically have this board; -someone with physical access to one sent me the output of autoport which -I then modified to produce this port. I was also sent the VBT binary, -which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running -version A21 of the vendor firmware. - -This was originally tested and found to be working as a standalone board -port in Libreboot, but this variant based port in upstream coreboot has -not been tested. - -This can be internally flashed by sending a command to the EC, which -causes the EC to pull the FDO pin low and the firmware to skip setting -up any chipset based write protections [1]. The EC is the SMSC MEC5055, -which seems to be compatible with the existing MEC5035 code. - -Change-Id: Idaf6618df70aa19d8e60b2263088737712dec5f0 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 7 + - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e5530/data.vbt | Bin 0 -> 6144 bytes - .../variants/e5530/early_init.c | 14 ++ - .../snb_ivb_latitude/variants/e5530/gpio.c | 194 ++++++++++++++++++ - .../variants/e5530/hda_verb.c | 32 +++ - .../variants/e5530/overridetree.cb | 39 ++++ - 7 files changed, 289 insertions(+) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index 03377275f0..183a67bec3 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select SYSTEM_TYPE_LAPTOP - select USE_NATIVE_RAMINIT - -+config BOARD_DELL_LATITUDE_E5530 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_12288 -+ select SOUTHBRIDGE_INTEL_C216 -+ - config BOARD_DELL_LATITUDE_E6430 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_12288 -@@ -38,6 +43,7 @@ config MAINBOARD_DIR - default "dell/snb_ivb_latitude" - - config MAINBOARD_PART_NUMBER -+ default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 - default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 - default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 - -@@ -48,6 +54,7 @@ config USBDEBUG_HCD_INDEX - default 2 - - config VARIANT_DIR -+ default "e5530" if BOARD_DELL_LATITUDE_E5530 - default "e6430" if BOARD_DELL_LATITUDE_E6430 - default "e6530" if BOARD_DELL_LATITUDE_E6530 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index d89185d670..c15ef4028f 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -1,5 +1,8 @@ - ## SPDX-License-Identifier: GPL-2.0-only - -+config BOARD_DELL_LATITUDE_E5530 -+ bool "Latitude E5530" -+ - config BOARD_DELL_LATITUDE_E6430 - bool "Latitude E6430" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..3c54b70be7856a6420d001112d7f17f8bab46ed3 -GIT binary patch -literal 6144 -zcmeHKU2Gdg5dO}0w$JA~+qs02q)iz56C9e5vuQ#oL0l3O+%|395Q2peO{y4(2uX0t -zuMja1N)bPb1cE+5)fYsCK!89MFQAGChyWpk5PuRkS^cR)3#-(r*-?zo-O^C(kLvv8XM<+Y3tdt^YY!P?!oTe -zJ^ed-x6w0Lh5fN#jsv5TWE#mtd*_yky}9xDK(kOwLt+C7_AQAd#iwr=o0`gvQZ`{x -z6ZeT`x^^;8+a~jSa^o~PF@8J6N5;o#dhCwebaM;!_oisw1#O9K={qQM<@Oeu$lXeN -z#wJGcW4Y<2)-A{Bot(NoKX%>qdnw-AOi9bKT9Z~HL5|7PJDHz4kGlEx143q+26EH6 -z{4KfB^9;?#dw(WfA; -zBCR3@pCS1a;A|CZW1h7H*l#mW{%y{bf)9ofiz!EHzyiac@{RpMzz>O-<~{hx5tw%b -z3ZJWD4_g-`iF`tUJb}+Vfe;XI1T2Y4_Y!iVk<MLB9et&!A7LDDE7&5ye#|hn%s#IWgagDEPNHHMUhb- -ztc9t?uz{bD#kh#kpsE;AO-wWHV?4olPStRPag^~k<737bjBgmt|ufS}_`LGs2bcSKCVBh4s0>G7ZR_@NWx -zkph}GhP}~YR?roT!61GqzQ?gBsuv3jY}UXbmr|alv^VxUqbz5<`5=!hhpaa*7DK~4 -zP4ad6dhH!>nYpc4{J&G-w{UiWo$zXnTz{tAq0|?c_`QJ7pKmCwIpe7Uix$P?9}v*1 -z(aVR6OkMkQ6oM}*UC@j78!~>7=OZCVYXeu|u0SiI4}w$uw6&0P09LF%Hp}O&IA3gl -z4@ap0NfAe+q(ZVm{Bwe*Do~kbCc$Q!x7b3Sk9tLgVmsR#oOrY`tq -z%|?L!zRd2-$V6^@$H@ml^iaX;uzoVB3JA(|h9tcNKXHdA43N0|18 -z&3$2QE=)(l=6qQDAWT1oO-2=+FU)Mg<35IDJ+8Tp; -z40F)Xt}$rVFdsLxLk7KRn4cKhmjeLd38j)HbM_Y%!3i_aD?8An8za8 -z@d(AD=Gv&%5;e{}p%i?_q(T*^IwzEx*Eu1wKHV9=lVUvjqv!B@cWER!2fe%`IqO?q -z!=Wf4kzGUaLX8`m#*P^uL?%M#6qc9Qu(YT|ZMb#7UzCc_(DkQYEGQ#%k_O0@^DN5S@MXi$D;acJ>#cTV-(U@Offv4ACp4hO4$Ll!WO)s3P4=t9vpWBC -zSckhlcD?xUuX=Gx96Dx{IsQ23r&;o1*+^Cp2RA3nd$A-RIHP2Q7uitC>c67FIR*5} -zB3a%B!?6K=TJ$W+SJv@*9Lms{mTvWmU4Zanj_Z*lSqOGISzYp?yawOqLhVhRt#-E6 -zd)YW~h&meh-5prIE}Cr&7f?MMi&cqTt_^%Fa?>k(=`9jVoIf@}{g+WX#TpWuc+!2v -zPG^>A|NZ2GlGsKdGqN{7>Fr7+Hc_^3z}uBhC4?nzOQ*!QyVugGjkK_~$bvtfY`h79 -z9rOI3;Mt}9)_G{zXTAPw`8T@6=Ut0r9R5;0#Zy|#8F;v4^UAmqft3iXL|`QXD-l?U -Jz~2*rUjdP?m;3+# - -literal 0 -HcmV?d00001 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c -new file mode 100644 -index 0000000000..ff83db095b ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c -@@ -0,0 +1,14 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c -new file mode 100644 -index 0000000000..0599f13921 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c -@@ -0,0 +1,194 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_GPIO, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_GPIO, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_GPIO, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_NATIVE, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio1 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio3 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio12 = GPIO_DIR_OUTPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_OUTPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio12 = GPIO_LEVEL_HIGH, -+ .gpio28 = GPIO_LEVEL_LOW, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+ .gpio30 = GPIO_RESET_RSMRST, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio13 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_GPIO, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_INPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_INPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_INPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio53 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_GPIO, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+ .gpio74 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c -new file mode 100644 -index 0000000000..3e89a6d75f ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76df, /* Codec Vendor / Device ID: IDT */ -+ 0x1028053d, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x1028053d), -+ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0xd5a301a0), -+ -+ 0x80862806, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb -new file mode 100644 -index 0000000000..85c448d010 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb -@@ -0,0 +1,39 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x053d inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x00000000" -+ register "gpu_pch_backlight" = "0x03d003d0" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 1, 1 }, -+ { 1, 1, 1 }, -+ { 1, 1, 2 }, -+ { 1, 1, 2 }, -+ { 1, 1, 3 }, -+ { 1, 0, 3 }, -+ { 1, 2, 4 }, -+ { 1, 1, 4 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 0, 6 }, -+ { 1, 1, 6 }, -+ }" -+ -+ device ref xhci on -+ register "superspeed_capable_ports" = "0x0000000f" -+ register "xhci_overcurrent_mapping" = "0x00000c03" -+ register "xhci_switchable_ports" = "0x0000000f" -+ end -+ device ref gbe off end -+ device ref pcie_rp7 on end # BCM5761 Ethernet -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0020-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch b/config/coreboot/default/patches/0020-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch deleted file mode 100644 index e42b7c9a..00000000 --- a/config/coreboot/default/patches/0020-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch +++ /dev/null @@ -1,435 +0,0 @@ -From e5ed7361d41b89ee38b572beb921924b33cc174d Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Sun, 26 Nov 2023 17:08:52 -0700 -Subject: [PATCH 20/65] mb/dell: Add Latitude E6420 (Sandy Bridge) - -Mainboard is PAL50/LA-6591P (UMA). The version with an Nvidia dGPU was -not tested. I do not physically have this system; someone with physical -access to one sent me the output of autoport which I then modified to -produce this port. I was also sent the VBT binary, which was obtained -from `/sys/kernel/debug/dri/0/i915_vbt` while running version A25 of the -vendor firmware. - -This was originally tested and found to be working as a standalone board -port in Libreboot, but this variant based port in upstream coreboot has -not been tested. - -This can be internally flashed by sending a command to the EC, which -causes the EC to pull the FDO pin low and the firmware to skip setting -up any chipset based write protections [1]. The EC is the SMSC MEC5055, -which seems to be compatible with the existing MEC5035 code. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: Ic48d9ea58172a5b13958c8afebcb19c8929c4394 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 13 +- - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e6420/data.vbt | Bin 0 -> 6144 bytes - .../variants/e6420/early_init.c | 14 ++ - .../snb_ivb_latitude/variants/e6420/gpio.c | 191 ++++++++++++++++++ - .../variants/e6420/hda_verb.c | 32 +++ - .../variants/e6420/overridetree.cb | 35 ++++ - 7 files changed, 287 insertions(+), 1 deletion(-) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index 183a67bec3..d2786970ee 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -17,6 +17,12 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select SYSTEM_TYPE_LAPTOP - select USE_NATIVE_RAMINIT - -+config BOARD_DELL_LATITUDE_E6420 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_10240 -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select SOUTHBRIDGE_INTEL_BD82X6X -+ - config BOARD_DELL_LATITUDE_E5530 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_12288 -@@ -43,6 +49,7 @@ config MAINBOARD_DIR - default "dell/snb_ivb_latitude" - - config MAINBOARD_PART_NUMBER -+ default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 - default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 - default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 - default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 -@@ -54,11 +61,15 @@ config USBDEBUG_HCD_INDEX - default 2 - - config VARIANT_DIR -+ default "e6420" if BOARD_DELL_LATITUDE_E6420 - default "e5530" if BOARD_DELL_LATITUDE_E5530 - default "e6430" if BOARD_DELL_LATITUDE_E6430 - default "e6530" if BOARD_DELL_LATITUDE_E6530 - - config VGA_BIOS_ID -- default "8086,0166" -+ default "8086,0166" if BOARD_DELL_LATITUDE_E5530 -+ default "8086,0126" if BOARD_DELL_LATITUDE_E6420 -+ default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ -+ || BOARD_DELL_LATITUDE_E6530 - - endif -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index c15ef4028f..257d428a70 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -1,5 +1,8 @@ - ## SPDX-License-Identifier: GPL-2.0-only - -+config BOARD_DELL_LATITUDE_E6420 -+ bool "Latitude E6420" -+ - config BOARD_DELL_LATITUDE_E5530 - bool "Latitude E5530" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..d3662eea1bc78b60be6d0bd2cc38bb46b654afbd -GIT binary patch -literal 6144 -zcmeHKeQZ-z6hE);wSBvNZ|mO1=*HLC2BQN8uVX6{N9eY)75ORymb$R8!YYuAZEgeE -zKk|S@Fen*n41W-viAF;r%)~^EkpLz-B{2q##)LmGAtoY;7*Qhv_1yPbw$TC$2}G0K -z=6Ao&x#ym9?z!i_&TOh(kLzky2cN8MTpny#R<;VU4Rkn?rBIz(YL~BBw<%b&zGhSH -z$~AQ>@D0d=Xx6RE0BwSxspWdrW9y#t7^)^(T-R<7W?O6ZTI%A+j=`C|f*UP9{h|4>ANrAe~?ymV*)83AaT#FuTjP=C2cg5P~ -zt4w78r$t#300cWY_k)mevmAmFI3&oBfytoAAPQiYK$XEIgHwV@5-gJ-Q-*p8yfTDj -zaDz=1Y!X1B3`OpQ&Ik}bM|0xHn0gYNZw0rT=7AXS2in-q8K^?)0|el+Z6geW7i7MM -zv~!|>HqL-|Fk}EYOa@)Rzg9Y -z8;!mD_V*XSjT33~$`o`s>zEGBq8AQ`HaH?y!Fh2QiX1v@aCo4LaENf&DZ_cE2A2qb -z5@cC}X)=S^1RvpXLWs~v*hqMau$!=t@B-mg!XV)|;eEm>!Z6`H;R4|&!d1d`f|S7^ -zli+B98*!TfPE&6~NVM5j3v{N3OTjpnm_L@BPh(}esd(J!gj?~iJP?n|OZZOiTqlql -zg{%-$T|cR -zZx5|xm>Fl>;@$m};P{0WC>O~-p>*$9CpHRLgN|POkqD^UP4nw|4nf0bc8MOBk<;%js -zfpCAWNzqSPlz@X%j9CGrwZDKUl@K{g6pzqiIIARDQ)#@^RW&0pmNG;XZ?!SlHB?L# -zKRAMgq(R;aQd%@Gy38-LS@ix)fR**(P3B9wI=Uk^&cWmmwBE34GYvuh1uQF+BUdWyQC5SaEM1QvKlHBMs13C}n{0SwRxW -ziekMa&kvRFruRcKCevGy5)TxUBDlur@E{TtQ^NQ>nO+Cgl)&Ga(PxqVW?e3TLH-UY -zdL3T{z^xdd`$(STFUb8R*cKa}r>n{Wk+MXRH~o-hN}#9OF*>T#>rfhiRs(Wc-R^9@ -z%F=<}dn(E}ADc03zJ>JvZe;_8f+WFLL4%qNYs`_aa`a$Pl5H;iO^Wt*cP3W(d=(g} -zZ%nKT1$|r-tAv8($u2-BI2Uiz#%OT&!Q3b~Ru2P2j;Gem!@wfPsTR%J>W{8z)oq^J -k^Qm&?O@bFkw4CTocwoW<6CRlGz=Q`TJTT#bN9KWl0rH4|j{pDw - -literal 0 -HcmV?d00001 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c -new file mode 100644 -index 0000000000..ff83db095b ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c -@@ -0,0 +1,14 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c -new file mode 100644 -index 0000000000..943c743f48 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c -@@ -0,0 +1,191 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_NATIVE, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_NATIVE, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_GPIO, -+ .gpio31 = GPIO_MODE_GPIO, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_INPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+ .gpio30 = GPIO_DIR_OUTPUT, -+ .gpio31 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio30 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_OUTPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_HIGH, -+ .gpio45 = GPIO_LEVEL_LOW, -+ .gpio49 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c -new file mode 100644 -index 0000000000..ede8445aaf ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ -+ 0x10280493, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x10280493), -+ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862805, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb -new file mode 100644 -index 0000000000..3012a3177f ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb -@@ -0,0 +1,35 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x0493 inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x0000054f" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 1, 1 }, -+ { 1, 1, 1 }, -+ { 1, 0, 2 }, -+ { 1, 1, 2 }, -+ { 1, 1, 3 }, -+ { 1, 1, 3 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 1, 7 }, -+ { 1, 1, 6 }, -+ { 1, 0, 6 }, -+ { 1, 0, 7 }, -+ }" -+ -+ device ref sata1 on -+ register "sata_port_map" = "0x3b" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0020-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch b/config/coreboot/default/patches/0020-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch new file mode 100644 index 00000000..46e38925 --- /dev/null +++ b/config/coreboot/default/patches/0020-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch @@ -0,0 +1,872 @@ +From 440ebbe1e10911dc3d8c53cf9eecb5519c2ecd67 Mon Sep 17 00:00:00 2001 +From: Riku Viitanen +Date: Sat, 23 Dec 2023 19:02:10 +0200 +Subject: [PATCH 20/51] mb/hp: Add Compaq Elite 8300 CMT port + +Based on autoport and Z220 SuperIO code. + +With SeaBIOS and Nouveau on Debian, only nomodeset works with GTX 780 +(must use proprietary driver instead). + +Tested by xilynx / spot_ on #libreboot: +- i3-3220, native raminit 2x2GB, M378B5773DH0-CH9 + MT8JTF25664AZ-1G6M1 +- Celeron G1620, native raminit 1x4GB, MT8JTF51264AZ-1G6E1 +- Booting Debian with Linux 6.1.0-16-amd64 via SeaBIOS +- All SATA ports +- Audio: internal speaker, headphone and microphone plugs +- Rebooting +- S3 suspend and wake +- libgfxinit: VGA, DisplayPort +- Ethernet +- Super I/O: fan speeds stay in control +- GPU in PEG slot + +Untested: +- EHCI debugging +- Other PCI/PCIe slots +- PS/2 +- Serial, parallel ports + +Change-Id: Ie6ec60d2f4ee50d5e3fa2847c19fa4cf0ab73363 +Signed-off-by: Riku Viitanen +--- + .../hp/compaq_elite_8300_cmt/Kconfig | 39 ++++ + .../hp/compaq_elite_8300_cmt/Kconfig.name | 2 + + .../hp/compaq_elite_8300_cmt/Makefile.mk | 7 + + .../hp/compaq_elite_8300_cmt/acpi/ec.asl | 1 + + .../compaq_elite_8300_cmt/acpi/platform.asl | 10 + + .../hp/compaq_elite_8300_cmt/acpi/superio.asl | 29 +++ + .../hp/compaq_elite_8300_cmt/acpi_tables.c | 12 ++ + .../hp/compaq_elite_8300_cmt/board_info.txt | 5 + + .../hp/compaq_elite_8300_cmt/cmos.default | 7 + + .../hp/compaq_elite_8300_cmt/cmos.layout | 74 +++++++ + .../hp/compaq_elite_8300_cmt/data.vbt | Bin 0 -> 3902 bytes + .../hp/compaq_elite_8300_cmt/devicetree.cb | 177 ++++++++++++++++ + .../hp/compaq_elite_8300_cmt/dsdt.asl | 26 +++ + .../hp/compaq_elite_8300_cmt/early_init.c | 14 ++ + .../compaq_elite_8300_cmt/gma-mainboard.ads | 17 ++ + src/mainboard/hp/compaq_elite_8300_cmt/gpio.c | 191 ++++++++++++++++++ + .../hp/compaq_elite_8300_cmt/hda_verb.c | 33 +++ + .../hp/compaq_elite_8300_cmt/mainboard.c | 16 ++ + 18 files changed, 660 insertions(+) + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Kconfig + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/cmos.default + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/data.vbt + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/early_init.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/gpio.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c + create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c + +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig +new file mode 100644 +index 0000000000..d2bfd35dc4 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig +@@ -0,0 +1,39 @@ ++if BOARD_HP_COMPAQ_ELITE_8300_CMT ++ ++config BOARD_SPECIFIC_OPTIONS ++ def_bool y ++ select BOARD_ROMSIZE_KB_16384 ++ select HAVE_ACPI_RESUME ++ select HAVE_ACPI_TABLES ++ select HAVE_CMOS_DEFAULT ++ select HAVE_OPTION_TABLE ++ select INTEL_GMA_HAVE_VBT ++ select INTEL_INT15 ++ select MAINBOARD_HAS_TPM1 ++ select MAINBOARD_HAS_LIBGFXINIT ++ select MAINBOARD_USES_IFD_GBE_REGION ++ select MEMORY_MAPPED_TPM ++ select NORTHBRIDGE_INTEL_SANDYBRIDGE ++ select SERIRQ_CONTINUOUS_MODE ++ select SOUTHBRIDGE_INTEL_C216 ++ select SUPERIO_NUVOTON_NPCD378 ++ select USE_NATIVE_RAMINIT ++ ++config CBFS_SIZE ++ default 0x570000 ++ ++config MAINBOARD_DIR ++ default "hp/compaq_elite_8300_cmt" ++ ++config MAINBOARD_PART_NUMBER ++ default "HP Compaq Elite 8300 CMT" ++ ++config VGA_BIOS_ID ++ default "8086,0152" ++ ++config DRAM_RESET_GATE_GPIO ++ default 60 ++ ++config USBDEBUG_HCD_INDEX # FIXME: check this ++ default 2 ++endif +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name +new file mode 100644 +index 0000000000..bd399b1e76 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name +@@ -0,0 +1,2 @@ ++config BOARD_HP_COMPAQ_ELITE_8300_CMT ++ bool "Compaq Elite 8300 CMT" +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk b/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk +new file mode 100644 +index 0000000000..fb492d3583 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk +@@ -0,0 +1,7 @@ ++## SPDX-License-Identifier: GPL-2.0-only ++ ++bootblock-y += early_init.c ++bootblock-y += gpio.c ++romstage-y += early_init.c ++romstage-y += gpio.c ++ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl +new file mode 100644 +index 0000000000..73fa78ef14 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl +@@ -0,0 +1 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl +new file mode 100644 +index 0000000000..aff432b6f4 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl +@@ -0,0 +1,10 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++Method(_WAK, 1) ++{ ++ Return(Package() {0, 0}) ++} ++ ++Method(_PTS, 1) ++{ ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl +new file mode 100644 +index 0000000000..54f8e3fe95 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl +@@ -0,0 +1,29 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++/* Copied over from compaq_8200_elite_sff/acpi/superio.asl */ ++ ++#include ++ ++Scope (\_GPE) ++{ ++ Method (_L0D, 0, NotSerialized) ++ { ++ Notify (\_SB.PCI0.EHC1, 0x02) ++ Notify (\_SB.PCI0.EHC2, 0x02) ++ //FIXME: Add GBE device ++ //Notify (\_SB.PCI0.GBE, 0x02) ++ } ++ ++ Method (_L09, 0, NotSerialized) ++ { ++ Notify (\_SB.PCI0.RP01, 0x02) ++ Notify (\_SB.PCI0.RP02, 0x02) ++ Notify (\_SB.PCI0.RP03, 0x02) ++ Notify (\_SB.PCI0.RP04, 0x02) ++ Notify (\_SB.PCI0.RP05, 0x02) ++ Notify (\_SB.PCI0.RP06, 0x02) ++ Notify (\_SB.PCI0.RP07, 0x02) ++ Notify (\_SB.PCI0.RP08, 0x02) ++ Notify (\_SB.PCI0.PEGP, 0x02) ++ } ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c b/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c +new file mode 100644 +index 0000000000..8f4f83b826 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c +@@ -0,0 +1,12 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++ ++void mainboard_fill_gnvs(struct global_nvs *gnvs) ++{ ++ /* Temperature at which OS will shutdown */ ++ gnvs->tcrt = 100; ++ /* Temperature at which OS will throttle CPU */ ++ gnvs->tpsv = 90; ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt b/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt +new file mode 100644 +index 0000000000..16c29e82d8 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt +@@ -0,0 +1,5 @@ ++Category: desktop ++ROM protocol: SPI ++ROM socketed: n ++Flashrom support: y ++Release year: 2012 +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default +new file mode 100644 +index 0000000000..6d27a79c66 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default +@@ -0,0 +1,7 @@ ++boot_option=Fallback ++debug_level=Debug ++power_on_after_fail=Enable ++nmi=Enable ++sata_mode=AHCI ++gfx_uma_size=32M ++psu_fan_lvl=3 +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout +new file mode 100644 +index 0000000000..1fc83b1a55 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout +@@ -0,0 +1,74 @@ ++## SPDX-License-Identifier: GPL-2.0-only ++ ++# ----------------------------------------------------------------- ++entries ++ ++# ----------------------------------------------------------------- ++0 120 r 0 reserved_memory ++ ++# ----------------------------------------------------------------- ++# RTC_BOOT_BYTE (coreboot hardcoded) ++384 1 e 4 boot_option ++388 4 h 0 reboot_counter ++ ++# ----------------------------------------------------------------- ++# coreboot config options: console ++395 4 e 6 debug_level ++400 3 h 0 psu_fan_lvl ++ ++# coreboot config options: southbridge ++408 1 e 1 nmi ++409 2 e 7 power_on_after_fail ++ ++421 1 e 9 sata_mode ++ ++# coreboot config options: northbridge ++432 3 e 11 gfx_uma_size ++ ++448 128 r 0 vbnv ++ ++# SandyBridge MRC Scrambler Seed values ++896 32 r 0 mrc_scrambler_seed ++928 32 r 0 mrc_scrambler_seed_s3 ++960 16 r 0 mrc_scrambler_seed_chk ++ ++# coreboot config options: check sums ++984 16 h 0 check_sum ++ ++# ----------------------------------------------------------------- ++ ++enumerations ++ ++#ID value text ++1 0 Disable ++1 1 Enable ++2 0 Enable ++2 1 Disable ++4 0 Fallback ++4 1 Normal ++6 0 Emergency ++6 1 Alert ++6 2 Critical ++6 3 Error ++6 4 Warning ++6 5 Notice ++6 6 Info ++6 7 Debug ++6 8 Spew ++7 0 Disable ++7 1 Enable ++7 2 Keep ++9 0 AHCI ++9 1 IDE ++11 0 32M ++11 1 64M ++11 2 96M ++11 3 128M ++11 4 160M ++11 5 192M ++11 6 224M ++ ++# ----------------------------------------------------------------- ++checksums ++ ++checksum 392 415 984 +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/data.vbt b/src/mainboard/hp/compaq_elite_8300_cmt/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..ba627e152b65d779a80529d3811ec4d21c1b1e54 +GIT binary patch +literal 3902 +zcmdT{U2GIp6h5;vvp;uc+U>N$b}h{<64)*MnJ%?9P1V_-)?HZIZFkwM#K;zQp(Lf0 +zb69XhyYd$H6Fo9yU(vE~()R;1j?k!Dq(D1|r9o2pI)6wGoV(Cz^&><0>;1cWR7zP*~YL5XE +z{3`?=k6Yy2an&85Zl2-7jM~D`7^g}MH^6WOPE9askfBLVUBl5fj(Wi%F%Ax(<(|k= +zUH4c9hXO|5?0UW22lb}G1;Fb@mzSZ8u5fTU59si@;V}EXTQ}(rl%Wn?F&a92X)&+> +zPTj@>Ls7r4(ffK2={zn6t_hS-cTaC$zZ!`R#y2KYqnT`O>nqx^H{P7_!|gKQVi}A& +z)G!L9*Z>@59dMlOh4owoes{Vd$kl1)tt1cJZseb2!YSsO`J_8jQ^hAhROmRyl4au@8tDixs`{k^Dwd%=Z +zH-yjQdy~%q^YKYth;}v$r!Z-pnAN<1I)+#R``=|huU|*W1ew~tpBFsG0q;_jCFT6Ulxt*TNv8# +z2{`>`$JM`Jd{F+EzpU7VIlvml?AFW1Xv$0tKyom(Ej2b-oERG0Q?%Jx8HYk6s9{*E +z_)hegWIm-8PLF`1DpU2QrTKj4;VUElwQBD4f+hZZbggj@JDLYbjpK69X2PaAVr^Xn{6e+%i&oRk>LBlzUQG|c;s(9FFjhafiyq*GToK^@07@tL{CZbd5K(*L<3rb71Ew* +zhn0l-*|a>v(n`=1+Du-&m2f&k|07qiv~u)9FuttfVcu_x;V>QXdsXjZ?db(%oNhK5 +zme#7yVBD-k)j4Zp4ohoWFJ0rv5wpCVNbYROUKoL9Ww31Rg%2ZHHV$2!ik&#T)={qH +z{mrUEty8JFXPPS;w@^`Y*;z%PU#m>bK7$Oci}}Epjc<@x;b&~*!Op}BgEe0X$iI{Gx1p1;4R>1E3jwQUCw| + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb +new file mode 100644 +index 0000000000..3d21739b72 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb +@@ -0,0 +1,177 @@ ++# SPDX-License-Identifier: GPL-2.0-only ++ ++chip northbridge/intel/sandybridge ++ register "gfx.use_spread_spectrum_clock" = "0" ++ register "gpu_dp_b_hotplug" = "0" ++ register "gpu_dp_c_hotplug" = "0" ++ register "gpu_dp_d_hotplug" = "0" ++ # BTX mainboard: Reversed mapping ++ register "spd_addresses" = "{0x53, 0x52, 0x51, 0x50}" ++ device domain 0 on ++ subsystemid 0x103c 0x3396 inherit ++ ++ device ref host_bridge on end # Host bridge Host bridge ++ device ref peg10 on end # PEG ++ device ref igd on end # iGPU ++ ++ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH ++ register "docking_supported" = "0" ++ register "gen1_dec" = "0x00fc0a01" ++ register "gen2_dec" = "0x00fc0801" ++ register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" ++ register "pcie_port_coalesce" = "1" ++ register "sata_interface_speed_support" = "0x3" ++ register "sata_port_map" = "0x1f" ++ register "spi_lvscc" = "0x2005" ++ register "spi_uvscc" = "0x2005" ++ register "superspeed_capable_ports" = "0x0000000f" ++ register "xhci_overcurrent_mapping" = "0x00000c03" ++ register "xhci_switchable_ports" = "0x0000000f" ++ register "usb_port_config" = "{ ++ { 1, 0, 0 }, ++ { 1, 0, 0 }, ++ { 1, 0, 1 }, ++ { 1, 0, 1 }, ++ { 1, 0, 2 }, ++ { 1, 0, 2 }, ++ { 1, 0, 3 }, ++ { 1, 0, 3 }, ++ { 1, 0, 4 }, ++ { 1, 0, 4 }, ++ { 1, 0, 6 }, ++ { 1, 0, 5 }, ++ { 1, 0, 5 }, ++ { 1, 0, 6 } ++ }" ++ ++ device ref xhci on end # USB 3.0 Controller ++ device ref mei1 off end # Management Engine Interface 1 ++ device ref mei2 off end ++ device ref me_ide_r off end ++ device ref me_kt off end ++ device ref gbe on end # Intel Gigabit Ethernet ++ device ref ehci1 on end # USB2 EHCI #1 ++ device ref ehci2 on end # USB2 EHCI #2 ++ device ref hda on end # High Definition Audio ++ device ref sata1 on end # SATA Controller 1 ++ device ref sata2 off end # SATA Controller 2 ++ device ref smbus on end # SMBus ++ ++ device ref pcie_rp1 on end ++ device ref pcie_rp2 on end ++ device ref pcie_rp3 on end ++ device ref pcie_rp4 on end ++ device ref pcie_rp5 on end ++ device ref pcie_rp6 on end ++ device ref pcie_rp7 on end ++ device ref pcie_rp8 on end ++ ++ device ref pci_bridge on end ++ device ref lpc on # LPC bridge ++ chip superio/common # copied from Z220 ++ device pnp 2e.ff on # passes SIO base addr to SSDT gen ++ chip superio/nuvoton/npcd378 ++ device pnp 2e.0 off end # Floppy ++ device pnp 2e.1 on # Parallel port ++ # global ++ ++ # serialice: Vendor writes: ++ irq 0x14 = 0x9c ++ irq 0x1c = 0xa8 ++ irq 0x1d = 0x08 ++ irq 0x22 = 0x3f ++ irq 0x1a = 0xb0 ++ # dumped from superiotool: ++ irq 0x1b = 0x1e ++ irq 0x27 = 0x08 ++ irq 0x2a = 0x20 ++ irq 0x2d = 0x01 ++ # parallel port ++ io 0x60 = 0x378 ++ irq 0x70 = 0x07 ++ drq 0x74 = 0x01 ++ end ++ device pnp 2e.2 off # COM1 ++ io 0x60 = 0x2f8 ++ irq 0x70 = 3 ++ end ++ device pnp 2e.3 on # COM2, IR ++ io 0x60 = 0x3f8 ++ irq 0x70 = 4 ++ end ++ device pnp 2e.4 on # LED control ++ io 0x60 = 0x600 ++ # IOBASE[0h] = bit0 LED red / green ++ # IOBASE[0h] = bit1-4 LED PWM duty cycle ++ # IOBASE[1h] = bit6 SWCC ++ ++ io 0x62 = 0x610 ++ # IOBASE [0h] = GPES ++ # IOBASE [1h] = GPEE ++ # IOBASE [4h:7h] = 32bit upcounter at 1Mhz ++ # IOBASE [8h:bh] = GPS ++ # IOBASE [ch:fh] = GPE ++ end ++ device pnp 2e.5 on # Mouse ++ irq 0x70 = 0xc ++ end ++ device pnp 2e.6 on # Keyboard ++ io 0x60 = 0x0060 ++ io 0x62 = 0x0064 ++ irq 0x70 = 0x01 ++ # serialice: Vendor writes: ++ drq 0xf0 = 0x40 ++ end ++ device pnp 2e.7 on # WDT ? ++ io 0x60 = 0x620 ++ end ++ device pnp 2e.8 on # HWM ++ io 0x60 = 0x800 ++ # IOBASE[0h:feh] HWM page ++ # IOBASE[ffh] bit0-bit3 page selector ++ ++ drq 0xf0 = 0x20 ++ drq 0xf1 = 0x01 ++ drq 0xf2 = 0x40 ++ drq 0xf3 = 0x01 ++ ++ drq 0xf4 = 0x66 ++ drq 0xf5 = 0x67 ++ drq 0xf6 = 0x66 ++ drq 0xf7 = 0x01 ++ end ++ device pnp 2e.f on # GPIO OD ? ++ drq 0xf1 = 0x97 ++ drq 0xf2 = 0x01 ++ drq 0xf5 = 0x08 ++ drq 0xfe = 0x80 ++ end ++ device pnp 2e.15 on # BUS ? ++ io 0x60 = 0x0680 ++ io 0x62 = 0x0690 ++ end ++ device pnp 2e.1c on # Suspend Control ? ++ io 0x60 = 0x640 ++ # writing to IOBASE[5h] ++ # 0x0: Power off ++ # 0x9: Power off and bricked until CMOS battery removed ++ end ++ device pnp 2e.1e on # GPIO ? ++ io 0x60 = 0x660 ++ drq 0xf4 = 0x01 ++ # skip the following, as it ++ # looks like remapped registers ++ #drq 0xf5 = 0x06 ++ #drq 0xf6 = 0x60 ++ #drq 0xfe = 0x03 ++ end ++ end ++ end ++ end ++ chip drivers/pc80/tpm ++ device pnp 4e.0 on end # TPM module ++ end ++ end ++ end ++ end ++end +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl b/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl +new file mode 100644 +index 0000000000..e8e2b3a3e5 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl +@@ -0,0 +1,26 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++DefinitionBlock( ++ "dsdt.aml", ++ "DSDT", ++ ACPI_DSDT_REV_2, ++ OEM_ID, ++ ACPI_TABLE_CREATOR, ++ 0x20141018 /* OEM revision */ ++) ++{ ++ #include ++ #include "acpi/platform.asl" ++ #include ++ #include ++ #include ++ #include ++ ++ Device (\_SB.PCI0) ++ { ++ #include ++ #include ++ } ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c b/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c +new file mode 100644 +index 0000000000..8d10c6317c +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c +@@ -0,0 +1,14 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include ++ ++#define SERIAL_DEV PNP_DEV(0x2e, NPCD378_SP2) ++ ++void bootblock_mainboard_early_init(void) ++{ ++ if (CONFIG(CONSOLE_SERIAL)) ++ nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); ++} +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads b/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads +new file mode 100644 +index 0000000000..686f7d44db +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads +@@ -0,0 +1,17 @@ ++-- SPDX-License-Identifier: GPL-2.0-or-later ++ ++with HW.GFX.GMA; ++with HW.GFX.GMA.Display_Probing; ++ ++use HW.GFX.GMA; ++use HW.GFX.GMA.Display_Probing; ++ ++private package GMA.Mainboard is ++ ++ ports : constant Port_List := ++ (DP2, ++ HDMI2, ++ Analog, ++ others => Disabled); ++ ++end GMA.Mainboard; +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c b/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c +new file mode 100644 +index 0000000000..2ae852ae51 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c +@@ -0,0 +1,191 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_NATIVE, ++ .gpio3 = GPIO_MODE_NATIVE, ++ .gpio4 = GPIO_MODE_NATIVE, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_GPIO, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_NATIVE, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_GPIO, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_NATIVE, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_NATIVE, ++ .gpio31 = GPIO_MODE_GPIO, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio11 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_OUTPUT, ++ .gpio16 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_OUTPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_OUTPUT, ++ .gpio29 = GPIO_DIR_OUTPUT, ++ .gpio31 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio15 = GPIO_LEVEL_LOW, ++ .gpio17 = GPIO_LEVEL_LOW, ++ .gpio28 = GPIO_LEVEL_LOW, ++ .gpio29 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio1 = GPIO_INVERT, ++ .gpio6 = GPIO_INVERT, ++ .gpio11 = GPIO_INVERT, ++ .gpio13 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_GPIO, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_GPIO, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_NATIVE, ++ .gpio46 = GPIO_MODE_GPIO, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_NATIVE, ++ .gpio52 = GPIO_MODE_NATIVE, ++ .gpio53 = GPIO_MODE_NATIVE, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_NATIVE, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_NATIVE, ++ .gpio61 = GPIO_MODE_GPIO, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio32 = GPIO_DIR_INPUT, ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_INPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio43 = GPIO_DIR_INPUT, ++ .gpio46 = GPIO_DIR_INPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio61 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_GPIO, ++ .gpio69 = GPIO_MODE_GPIO, ++ .gpio70 = GPIO_MODE_GPIO, ++ .gpio71 = GPIO_MODE_GPIO, ++ .gpio72 = GPIO_MODE_GPIO, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_NATIVE, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio68 = GPIO_DIR_INPUT, ++ .gpio69 = GPIO_DIR_INPUT, ++ .gpio70 = GPIO_DIR_INPUT, ++ .gpio71 = GPIO_DIR_OUTPUT, ++ .gpio72 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++ .gpio71 = GPIO_LEVEL_LOW, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c b/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c +new file mode 100644 +index 0000000000..a1eafcda68 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c +@@ -0,0 +1,33 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ 0x10ec0221, /* Codec Vendor / Device ID: Realtek */ ++ 0x103c3396, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x103c3396), ++ AZALIA_PIN_CFG(0, 0x12, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x14, 0x01014020), ++ AZALIA_PIN_CFG(0, 0x17, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x18, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x19, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x1a, 0x02a11c3f), ++ AZALIA_PIN_CFG(0, 0x1b, 0x01813c30), ++ AZALIA_PIN_CFG(0, 0x1d, 0x415901f0), ++ AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), ++ AZALIA_PIN_CFG(0, 0x21, 0x0221102f), ++ ++ 0x80862806, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x58560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x58560030), ++ ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c b/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c +new file mode 100644 +index 0000000000..8dbd95ef96 +--- /dev/null ++++ b/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c +@@ -0,0 +1,16 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++ ++static void mainboard_enable(struct device *dev) ++{ ++ install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE, ++ GMA_INT15_PANEL_FIT_DEFAULT, ++ GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); ++} ++ ++struct chip_operations mainboard_ops = { ++ .enable_dev = mainboard_enable, ++}; +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0021-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch b/config/coreboot/default/patches/0021-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch deleted file mode 100644 index 9c210c8c..00000000 --- a/config/coreboot/default/patches/0021-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch +++ /dev/null @@ -1,449 +0,0 @@ -From 73313e682ba8808f8db6259ac7d93f54c11cb884 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Wed, 31 Jan 2024 22:07:25 -0700 -Subject: [PATCH 21/65] mb/dell: Add Latitude E6520 (Sandy Bridge) - -Mainboard is PAL60/LA-6562P (UMA). The version with an Nvidia dGPU was -not tested. I do not physically have this system; someone with physical -access to one sent me the output of autoport which I then modified to -produce this port. I was also sent the VBT binary, which was obtained -from `/sys/kernel/debug/dri/0/i915_vbt` while running version A08 of the -vendor firmware. - -This was originally tested and found to be working as a standalone board -port in Libreboot, but this variant based port in upstream coreboot has -not been tested. - -This can be internally flashed by sending a command to the EC, which -causes the EC to pull the FDO pin low and the firmware to skip setting -up any chipset based write protections [1]. The EC is the SMSC MEC5055, -which seems to be compatible with the existing MEC5035 code. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: Ibdd40cc15642b8d404159d5962670ccc4167a9ec -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 9 + - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e6520/data.vbt | Bin 0 -> 6144 bytes - .../variants/e6520/early_init.c | 31 +++ - .../snb_ivb_latitude/variants/e6520/gpio.c | 190 ++++++++++++++++++ - .../variants/e6520/hda_verb.c | 32 +++ - .../variants/e6520/overridetree.cb | 35 ++++ - 7 files changed, 300 insertions(+) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index d2786970ee..72bdc96c0a 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -23,6 +23,12 @@ config BOARD_DELL_LATITUDE_E6420 - select MAINBOARD_USES_IFD_GBE_REGION - select SOUTHBRIDGE_INTEL_BD82X6X - -+config BOARD_DELL_LATITUDE_E6520 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_10240 -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select SOUTHBRIDGE_INTEL_BD82X6X -+ - config BOARD_DELL_LATITUDE_E5530 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_12288 -@@ -50,6 +56,7 @@ config MAINBOARD_DIR - - config MAINBOARD_PART_NUMBER - default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 -+ default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 - default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 - default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 - default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 -@@ -62,11 +69,13 @@ config USBDEBUG_HCD_INDEX - - config VARIANT_DIR - default "e6420" if BOARD_DELL_LATITUDE_E6420 -+ default "e6520" if BOARD_DELL_LATITUDE_E6520 - default "e5530" if BOARD_DELL_LATITUDE_E5530 - default "e6430" if BOARD_DELL_LATITUDE_E6430 - default "e6530" if BOARD_DELL_LATITUDE_E6530 - - config VGA_BIOS_ID -+ default "8086,0116" if BOARD_DELL_LATITUDE_E6520 - default "8086,0166" if BOARD_DELL_LATITUDE_E5530 - default "8086,0126" if BOARD_DELL_LATITUDE_E6420 - default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index 257d428a70..c7665ac263 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -3,6 +3,9 @@ - config BOARD_DELL_LATITUDE_E6420 - bool "Latitude E6420" - -+config BOARD_DELL_LATITUDE_E6520 -+ bool "Latitude E6520" -+ - config BOARD_DELL_LATITUDE_E5530 - bool "Latitude E5530" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..0ef16ee7cb482d2cb91ea80c3f419759355f7ba0 -GIT binary patch -literal 6144 -zcmeHKZ){Ul6hE);wSB#PZ|mL$bQ^!}HW(eF@H)0JafGfbqsZ9G21{L7Sg{or$5uN) -z_QgG55e!O(8p8*oBhhF`l$n^QF%rN;rzFNqqcPzFCd5QSB1Y7RKt1=pmTk1aFo9^Y -z+x+gi_nvdlJ@?#m&wZWW=G#bH>ze$J`&!oe*Q|E0r!)d89LYY8b$aowZEoG-uiIF+ -z#n;$ezm6VjWFixQ -z)4V8f0Gt`D`+>9Fr~tnJ76EJ`5D_F1cn-`0$RgN9unI6kfYkzIiO?W`ON4+34lv1_ -zNdPDkq1cf$p8^EW;TS*O$CdzNo#1fbIG_Oi0T(ti0jwyt0le_p_HlvX^CFvr)>$b> -zO-z8^CSU`w=mIK7Q)@9fR;XUzrFu{T=rRyygIZBpU9+Or>+?4R9%~G?Y-|g)Z`Sti -z+do(U*Wb-xR~DzjS<75#=Us4sH^C9U2FCbND7L7u$>M|<;t=AnRfI9C0v8c~AVg7t -zIU<3D2oK^>L;%r(*o=4*u?Mja@dDyi#4zFn;(f#^#3*76aUSs#;tJv#La-6YLRdQB -zdcvfERkvH?k~GJlfMVe-1?&ZXy}n)YwnVAgNlz#zX;=IX)-F -z)9LL3lbEdY5Co)LsK?vP)7s}G(5xduE!Y!#Wgh_T&xi$uUA#0e}X3D~`J(bHz;DgTa@GrpW6=>eZwJeNYYo*GjF=``;( -zuoQ3|V5YoKd$j=KK{`uSX*DeU1oJg=+RT6)rLe6%2>Ci^!5ao=*gS}wFN=nUf`fTF -zM?Gb5ycWjM7I?MJ!2;w|LFg=UoLq-ytr2iemG)AsW}bI4X9PK}T5UKsQi7anu=tD6 -zf|={kXkNeQBD>6bQ3taC8XJOJ^e40_ydyfr&a41L^1)jNrKwnT0Vx -z-jp>o1ffJNommZ4?=TIPlePIw0hgQ706f*tBC`#pg>9&zRHe>J2%RxBTrOc6Adh9E -ziJr`?VQH!N!_GkoKaoq|+3$^Ae0#sUxXlmM1Huq~g<=Ls?ILv+nQcH%PQedGOlH=Q -z77rMcJlH4Mkc#U2(IDv>rsm1aHpsdL_RdT^i_ACcQUMIJcSus}*(?CIiy^#^=t=g1 -z+*^Zbh30&^#_bKclSy9pL$ao -z00DnFy~Uek!JRwhVX!of0)$Sa*X^S~LMQH0 -+#include -+#include -+#include -+ -+const struct southbridge_usb_port mainboard_usb_ports[] = { -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 1, 1 }, -+ { 1, 1, 1 }, -+ { 1, 0, 2 }, -+ { 1, 1, 2 }, -+ { 1, 0, 3 }, -+ { 1, 0, 3 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 1, 7 }, -+ { 1, 1, 6 }, -+ { 1, 0, 6 }, -+ { 1, 0, 7 }, -+}; -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c -new file mode 100644 -index 0000000000..61f01816c4 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c -@@ -0,0 +1,190 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_NATIVE, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_NATIVE, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_GPIO, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_INPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+ .gpio30 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio30 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_OUTPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_HIGH, -+ .gpio45 = GPIO_LEVEL_LOW, -+ .gpio49 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c -new file mode 100644 -index 0000000000..ae376691e7 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ -+ 0x10280494, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x10280494), -+ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0x400000f2), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862805, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb -new file mode 100644 -index 0000000000..f90f2dee1f ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb -@@ -0,0 +1,35 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x0494 inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x00001312" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 1, 1 }, -+ { 1, 1, 1 }, -+ { 1, 0, 2 }, -+ { 1, 1, 2 }, -+ { 1, 1, 3 }, -+ { 1, 1, 3 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 1, 7 }, -+ { 1, 1, 6 }, -+ { 1, 0, 6 }, -+ { 1, 0, 7 }, -+ }" -+ -+ device ref sata1 on -+ register "sata_port_map" = "0x3b" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch b/config/coreboot/default/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch new file mode 100644 index 00000000..b3305e58 --- /dev/null +++ b/config/coreboot/default/patches/0021-nb-intel-haswell-make-IOMMU-a-runtime-option.patch @@ -0,0 +1,292 @@ +From 4c7577314f19e934d690c4cce3642fe693400c07 Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Sat, 2 Mar 2024 22:51:09 +0000 +Subject: [PATCH 21/51] nb/intel/haswell: make IOMMU a runtime option + +When I tested graphics cards on a coreboot port for Dell +OptiPlex 9020 SFF, I could not use a graphics card unless +I set iommu=off on the Linux cmdline. + +Coreboot's current behaviour is to check whether the CPU +has vt-d support and, if it does, initialise the IOMMU. + +This patch maintains the current behaviour by default, but +allows the user to turn *off* the IOMMU, even if vt-d is +supported by the host CPU. + +If iommu=Disable is specified, the check will not be +performed, and the IOMMU will be left disabled. This option +has been added to all current Haswell boards, though it is +recommended to leave the IOMMU turned on in most setups. + +Signed-off-by: Leah Rowe +--- + src/mainboard/asrock/b85m_pro4/cmos.default | 1 + + src/mainboard/asrock/b85m_pro4/cmos.layout | 3 +++ + src/mainboard/asrock/h81m-hds/cmos.default | 1 + + src/mainboard/asrock/h81m-hds/cmos.layout | 6 ++++++ + src/mainboard/dell/optiplex_9020/cmos.default | 1 + + src/mainboard/dell/optiplex_9020/cmos.layout | 6 ++++++ + src/mainboard/google/beltino/cmos.layout | 5 +++++ + src/mainboard/google/slippy/cmos.layout | 5 +++++ + src/mainboard/intel/baskingridge/cmos.layout | 4 ++++ + src/mainboard/lenovo/haswell/cmos.default | 1 + + src/mainboard/lenovo/haswell/cmos.layout | 3 +++ + src/mainboard/supermicro/x10slm-f/cmos.default | 1 + + src/mainboard/supermicro/x10slm-f/cmos.layout | 6 ++++++ + src/northbridge/intel/haswell/early_init.c | 5 +++++ + 14 files changed, 48 insertions(+) + +diff --git a/src/mainboard/asrock/b85m_pro4/cmos.default b/src/mainboard/asrock/b85m_pro4/cmos.default +index 01bf20ad16..dfc8b80fb0 100644 +--- a/src/mainboard/asrock/b85m_pro4/cmos.default ++++ b/src/mainboard/asrock/b85m_pro4/cmos.default +@@ -4,3 +4,4 @@ boot_option=Fallback + debug_level=Debug + nmi=Enable + power_on_after_fail=Disable ++iommu=Enable +diff --git a/src/mainboard/asrock/b85m_pro4/cmos.layout b/src/mainboard/asrock/b85m_pro4/cmos.layout +index efdc333fc2..c9883ea71d 100644 +--- a/src/mainboard/asrock/b85m_pro4/cmos.layout ++++ b/src/mainboard/asrock/b85m_pro4/cmos.layout +@@ -11,6 +11,7 @@ + 395 4 e 4 debug_level + 408 1 e 1 nmi + 409 2 e 5 power_on_after_fail ++ 412 1 e 6 iommu + 984 16 h 0 check_sum + # ----------------------------------------------------------------- + +@@ -38,6 +39,8 @@ + 5 0 Disable + 5 1 Enable + 5 2 Keep ++ 6 0 Disable ++ 6 1 Enable + # ----------------------------------------------------------------- + + # ----------------------------------------------------------------- +diff --git a/src/mainboard/asrock/h81m-hds/cmos.default b/src/mainboard/asrock/h81m-hds/cmos.default +index 01bf20ad16..dfc8b80fb0 100644 +--- a/src/mainboard/asrock/h81m-hds/cmos.default ++++ b/src/mainboard/asrock/h81m-hds/cmos.default +@@ -4,3 +4,4 @@ boot_option=Fallback + debug_level=Debug + nmi=Enable + power_on_after_fail=Disable ++iommu=Enable +diff --git a/src/mainboard/asrock/h81m-hds/cmos.layout b/src/mainboard/asrock/h81m-hds/cmos.layout +index c9ba76c78f..95ee3d36fb 100644 +--- a/src/mainboard/asrock/h81m-hds/cmos.layout ++++ b/src/mainboard/asrock/h81m-hds/cmos.layout +@@ -21,6 +21,9 @@ entries + 408 1 e 1 nmi + 409 2 e 5 power_on_after_fail + ++# enable or disable iommu ++412 1 e 6 iommu ++ + # coreboot config options: check sums + 984 16 h 0 check_sum + +@@ -52,6 +55,9 @@ enumerations + 5 1 Enable + 5 2 Keep + ++6 0 Disable ++6 1 Enable ++ + # ----------------------------------------------------------------- + checksums + +diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default +index 6c4a2a1be7..8000eea8c0 100644 +--- a/src/mainboard/dell/optiplex_9020/cmos.default ++++ b/src/mainboard/dell/optiplex_9020/cmos.default +@@ -4,3 +4,4 @@ debug_level=Debug + nmi=Disable + power_on_after_fail=Disable + fan_full_speed=Disable ++iommu=Enable +diff --git a/src/mainboard/dell/optiplex_9020/cmos.layout b/src/mainboard/dell/optiplex_9020/cmos.layout +index d10ad95b23..4a1496a878 100644 +--- a/src/mainboard/dell/optiplex_9020/cmos.layout ++++ b/src/mainboard/dell/optiplex_9020/cmos.layout +@@ -21,6 +21,9 @@ entries + 408 1 e 1 nmi + 409 2 e 5 power_on_after_fail + ++# turn iommu on or off ++411 1 e 6 iommu ++ + # coreboot config options: EC + 412 1 e 1 fan_full_speed + +@@ -55,6 +58,9 @@ enumerations + 5 1 Enable + 5 2 Keep + ++6 0 Disable ++6 1 Enable ++ + # ----------------------------------------------------------------- + checksums + +diff --git a/src/mainboard/google/beltino/cmos.layout b/src/mainboard/google/beltino/cmos.layout +index 78d44c1415..c143979ae1 100644 +--- a/src/mainboard/google/beltino/cmos.layout ++++ b/src/mainboard/google/beltino/cmos.layout +@@ -19,6 +19,9 @@ entries + 408 1 e 1 nmi + 409 2 e 7 power_on_after_fail + ++# enable or disable iommu ++412 1 e 8 iommu ++ + # coreboot config options: bootloader + #Used by ChromeOS: + 416 128 r 0 vbnv +@@ -47,6 +50,8 @@ enumerations + 7 0 Disable + 7 1 Enable + 7 2 Keep ++8 0 Disable ++8 1 Enable + # ----------------------------------------------------------------- + checksums + +diff --git a/src/mainboard/google/slippy/cmos.layout b/src/mainboard/google/slippy/cmos.layout +index 78d44c1415..c143979ae1 100644 +--- a/src/mainboard/google/slippy/cmos.layout ++++ b/src/mainboard/google/slippy/cmos.layout +@@ -19,6 +19,9 @@ entries + 408 1 e 1 nmi + 409 2 e 7 power_on_after_fail + ++# enable or disable iommu ++412 1 e 8 iommu ++ + # coreboot config options: bootloader + #Used by ChromeOS: + 416 128 r 0 vbnv +@@ -47,6 +50,8 @@ enumerations + 7 0 Disable + 7 1 Enable + 7 2 Keep ++8 0 Disable ++8 1 Enable + # ----------------------------------------------------------------- + checksums + +diff --git a/src/mainboard/intel/baskingridge/cmos.layout b/src/mainboard/intel/baskingridge/cmos.layout +index 78d44c1415..f2c602f541 100644 +--- a/src/mainboard/intel/baskingridge/cmos.layout ++++ b/src/mainboard/intel/baskingridge/cmos.layout +@@ -19,6 +19,8 @@ entries + 408 1 e 1 nmi + 409 2 e 7 power_on_after_fail + ++412 1 e 8 iommu ++ + # coreboot config options: bootloader + #Used by ChromeOS: + 416 128 r 0 vbnv +@@ -47,6 +49,8 @@ enumerations + 7 0 Disable + 7 1 Enable + 7 2 Keep ++8 0 Disable ++8 1 Enable + # ----------------------------------------------------------------- + checksums + +diff --git a/src/mainboard/lenovo/haswell/cmos.default b/src/mainboard/lenovo/haswell/cmos.default +index 08db97c5a9..cc6b363cd9 100644 +--- a/src/mainboard/lenovo/haswell/cmos.default ++++ b/src/mainboard/lenovo/haswell/cmos.default +@@ -14,3 +14,4 @@ trackpoint=Enable + backlight=Keyboard + enable_dual_graphics=Disable + usb_always_on=Disable ++iommu=Enable +diff --git a/src/mainboard/lenovo/haswell/cmos.layout b/src/mainboard/lenovo/haswell/cmos.layout +index 27915d3ab7..59df76b64c 100644 +--- a/src/mainboard/lenovo/haswell/cmos.layout ++++ b/src/mainboard/lenovo/haswell/cmos.layout +@@ -23,6 +23,7 @@ entries + + # coreboot config options: EC + 411 1 e 8 first_battery ++413 1 e 14 iommu + 415 1 e 1 wlan + 416 1 e 1 trackpoint + 417 1 e 1 fn_ctrl_swap +@@ -72,6 +73,8 @@ enumerations + 13 0 Disable + 13 1 AC and battery + 13 2 AC only ++14 0 Disable ++14 1 Enable + + # ----------------------------------------------------------------- + checksums +diff --git a/src/mainboard/supermicro/x10slm-f/cmos.default b/src/mainboard/supermicro/x10slm-f/cmos.default +index 7ce38fb5d7..6049e7938a 100644 +--- a/src/mainboard/supermicro/x10slm-f/cmos.default ++++ b/src/mainboard/supermicro/x10slm-f/cmos.default +@@ -5,3 +5,4 @@ debug_level=Debug + nmi=Enable + power_on_after_fail=Keep + hide_ast2400=Disable ++iommu=Enable +diff --git a/src/mainboard/supermicro/x10slm-f/cmos.layout b/src/mainboard/supermicro/x10slm-f/cmos.layout +index 38ba87aa45..24d39e97ee 100644 +--- a/src/mainboard/supermicro/x10slm-f/cmos.layout ++++ b/src/mainboard/supermicro/x10slm-f/cmos.layout +@@ -21,6 +21,9 @@ entries + 408 1 e 1 nmi + 409 2 e 5 power_on_after_fail + ++# enable or disable iommu ++412 1 e 6 iommu ++ + # coreboot config options: mainboard + 416 1 e 1 hide_ast2400 + +@@ -55,6 +58,9 @@ enumerations + 5 1 Enable + 5 2 Keep + ++6 0 Disable ++6 1 Enable ++ + # ----------------------------------------------------------------- + checksums + +diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c +index e47deb5da6..1a7e0b1076 100644 +--- a/src/northbridge/intel/haswell/early_init.c ++++ b/src/northbridge/intel/haswell/early_init.c +@@ -5,6 +5,7 @@ + #include + #include + #include ++#include + + #include "haswell.h" + +@@ -157,6 +158,10 @@ static void haswell_setup_misc(void) + static void haswell_setup_iommu(void) + { + const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A); ++ u8 enable_iommu = get_uint_option("iommu", 1); ++ ++ if (!enable_iommu) ++ return; + + if (capid0_a & VTD_DISABLE) + return; +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch b/config/coreboot/default/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch new file mode 100644 index 00000000..f18f119e --- /dev/null +++ b/config/coreboot/default/patches/0022-dell-optiplex_9020-Disable-IOMMU-by-default.patch @@ -0,0 +1,29 @@ +From b5695d0f0dc44ed1eb1feac008e601040feda55d Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Sat, 2 Mar 2024 23:00:09 +0000 +Subject: [PATCH 22/51] dell/optiplex_9020: Disable IOMMU by default + +Needed to make graphics cards work. Turning it on is +recommended if only using iGPU, otherwise leave it off +by default. The IOMMU is extremely buggy when a graphics +card is used. Leaving it off by default will ensure that +the default ROM images in Libreboot will work on any setup. + +Signed-off-by: Leah Rowe +--- + src/mainboard/dell/optiplex_9020/cmos.default | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default +index 8000eea8c0..0700f971ee 100644 +--- a/src/mainboard/dell/optiplex_9020/cmos.default ++++ b/src/mainboard/dell/optiplex_9020/cmos.default +@@ -4,4 +4,4 @@ debug_level=Debug + nmi=Disable + power_on_after_fail=Disable + fan_full_speed=Disable +-iommu=Enable ++iommu=Disable +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch b/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch deleted file mode 100644 index 3a580662..00000000 --- a/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch +++ /dev/null @@ -1,442 +0,0 @@ -From a7e2fde426280a944916c341586361f3ac9fa9a8 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Wed, 7 Feb 2024 10:23:38 -0700 -Subject: [PATCH 22/65] mb/dell: Add Latitude E5520 (Sandy Bridge) - -Mainboard is Krug 15". I do not physically have this system; someone -with physical access to one sent me the output of autoport which I then -modified to produce this port. I was also sent the VBT binary, which was -obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version -A14 of the vendor firmware. - -This was originally tested and found to be working as a standalone -board port in Libreboot, but this variant based port in upstream -coreboot has not been tested. - -This can be internally flashed by sending a command to the EC, which -causes the EC to pull the FDO pin low and the firmware to skip setting -up any chipset based write protections [1]. The EC is the SMSC MEC5055, -which seems to be compatible with the existing MEC5035 code. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e5520/data.vbt | Bin 0 -> 6144 bytes - .../variants/e5520/early_init.c | 14 ++ - .../snb_ivb_latitude/variants/e5520/gpio.c | 195 ++++++++++++++++++ - .../variants/e5520/hda_verb.c | 32 +++ - .../variants/e5520/overridetree.cb | 39 ++++ - 7 files changed, 292 insertions(+), 1 deletion(-) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index 72bdc96c0a..4e94a7ef80 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select SYSTEM_TYPE_LAPTOP - select USE_NATIVE_RAMINIT - -+config BOARD_DELL_LATITUDE_E5520 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_6144 -+ select SOUTHBRIDGE_INTEL_BD82X6X -+ - config BOARD_DELL_LATITUDE_E6420 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_10240 -@@ -55,6 +60,7 @@ config MAINBOARD_DIR - default "dell/snb_ivb_latitude" - - config MAINBOARD_PART_NUMBER -+ default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 - default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 - default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 - default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 -@@ -68,6 +74,7 @@ config USBDEBUG_HCD_INDEX - default 2 - - config VARIANT_DIR -+ default "e5520" if BOARD_DELL_LATITUDE_E5520 - default "e6420" if BOARD_DELL_LATITUDE_E6420 - default "e6520" if BOARD_DELL_LATITUDE_E6520 - default "e5530" if BOARD_DELL_LATITUDE_E5530 -@@ -77,7 +84,8 @@ config VARIANT_DIR - config VGA_BIOS_ID - default "8086,0116" if BOARD_DELL_LATITUDE_E6520 - default "8086,0166" if BOARD_DELL_LATITUDE_E5530 -- default "8086,0126" if BOARD_DELL_LATITUDE_E6420 -+ default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ -+ || BOARD_DELL_LATITUDE_E5520 - default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ - || BOARD_DELL_LATITUDE_E6530 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index c7665ac263..7976691f21 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -1,5 +1,8 @@ - ## SPDX-License-Identifier: GPL-2.0-only - -+config BOARD_DELL_LATITUDE_E5520 -+ bool "Latitude E5520" -+ - config BOARD_DELL_LATITUDE_E6420 - bool "Latitude E6420" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..b511e75262e37fa123d674e9a7b21a8dfe427729 -GIT binary patch -literal 6144 -zcmeHKZ){Ul6hE);wSBvNZ|mL$bmQOM2BTvXUI!}^N9ejTij1vnu+)Wx6Fjj -z&F`Lj?>YC}bI(2Z+}C+6zKyiGrosQXuW7A+&1%lnvFGE -zeD#gB>*#Tq4&j^|7Xcz1r^pp*)g#T}u1Me3ct>Pgls5Qi3!6e2W0%`a-Ic|3efWuR -zXJ@#}wJyGMTXTcY<%@TBKh@(3hP$Gjv}E}rx-%9D_eLXhYe!c&-VyDg-Cdo1>Biji -zNNsnlFW#|jdoOj?mZ43m>cVO%UE9@*E7x|%V~c4`XD4l9GCi~@+7pfMibfX8L?!^I -zc~Rg1I5SxH1DAEZ0{jA41jrJBh#-l;b6^%g7QrThRe)&%tQH_!ggOD7A_PRRgGuI0 -z0zi=n#rCB66d-sO$M~^6wgeb$2fH1|0R`v}xUiWCU`4SF;Dyh&j|mK&6WJWJ&Pq9I -zVgmFQfh+)vE}(KWwHA|Oh3fSkss|;2E(2i}s1?gRRV%8!K7U={vHD=s#+Fd)W^M1j -z{R4$??VSvEWpgT=vCM&1-U$bI6CB~IV3Z$$Vv7o!EDnev4j~R(MHsazZ~^fLLKGF4 -zEfQFOa3dZ?1Q1P#&4?!vyAk^k&m&$z3?WV+-b0*1j37o4=MX<3E+eiYge(Ht2umAW -zOPDmU>UL{flI9u|@JtVvfp#o8ek?VfVV9YP5(%pnZX~{PKq4WoWGmV8t$=Ri@{zLQ -zNYYt4<$0Ry&qIoG;7s-t333)Nu8opN{NG!)&!I@eO(cVx8vBVEBvotJ7%yNl$7iQ_ -zI=xk30+V$ff`F61}ljxDE1dcda^&!do|r^eJkI?aC- -zEQMSfm?VYL6W4=aCiy4rk%xq~5LV?bi|GL2$G7li<%c7yd;6T34 -zQBN5huZ3~6`ChGkpb$Bg5ITb#2iK-qs|1`=sl6Dhn(Lj&8Agt?S{sTDmmtRj7Jm_1 -zFnt{w&FdFkWS3bl>OeL?eO+*i{)9G!cSI-InGt|U0eEYmRCOHm7|I;#LO8ksRIeJ# -zGe+jTwPg4C4TYuN(9zULV3k+hI$YuPo=%N8oZ#u_4S!3Xelt6N0BmuC`hCNeg+&97 -z6*!>)uHvr%2004GZv?!_-y&|TRmil=9D%Q`1aXBsnD^gov3*UZI34&1_vn(B=T4kZ -z_A>ClXVIBNaS^hd&^DrU6VgZMYeadMkdFxcktn|ra-Gl;n^I{bt86rCQ=YMry*B!$ -zP5ID9KDE)GZOY#^VwPyRq^y+48j0?ZlzxdkC()CV@`*&wO7vGr;qjA3rb}gIwM-gi -zx>HsT$mEDj-%Ir=@rh7)SR;b -zAEWQGv_X1)wq0y5Ha0c~&psIslnaeSK~X8*^Z9SE44_`P#KIUL -zf6^N2f>5HCPWM3N+f0MyWOV^kz~!-wVc4MRXOY>4Jsxd1RyBKEMzNf{RKhesKFdbq -zJ(*dl)ZQGyW_x->i#;FvQ*=Nv&nG0N5@D@jjv_Q}K}6MP?1A6`JGe -zDwj9pN+x;T4>`I9e5x(uqdK#OGB31ikk@Xv=dxLb4fx(;ktX@rOb~M~?dYQQYiPia -z8r;jUQ?sd2@3||-cb2Eb%JFYfxHsONoaJ^eqoKN{3SATgBQlEoN7&ZV9Eni9+>jLln16fFy(=V -H=7E0zE^L4Z - -literal 0 -HcmV?d00001 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c -new file mode 100644 -index 0000000000..ff83db095b ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c -@@ -0,0 +1,14 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c -new file mode 100644 -index 0000000000..f76b93d9f0 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c -@@ -0,0 +1,195 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_NATIVE, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_GPIO, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_GPIO, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_NATIVE, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_GPIO, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio3 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio12 = GPIO_DIR_OUTPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_INPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+ .gpio30 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio12 = GPIO_LEVEL_HIGH, -+ .gpio30 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_NATIVE, -+ .gpio46 = GPIO_MODE_GPIO, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_NATIVE, -+ .gpio50 = GPIO_MODE_GPIO, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_GPIO, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_GPIO, -+ .gpio56 = GPIO_MODE_GPIO, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_OUTPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio46 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio50 = GPIO_DIR_OUTPUT, -+ .gpio51 = GPIO_DIR_OUTPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio53 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio55 = GPIO_DIR_OUTPUT, -+ .gpio56 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_LOW, -+ .gpio37 = GPIO_LEVEL_LOW, -+ .gpio46 = GPIO_LEVEL_HIGH, -+ .gpio50 = GPIO_LEVEL_HIGH, -+ .gpio51 = GPIO_LEVEL_LOW, -+ .gpio55 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_NATIVE, -+ .gpio69 = GPIO_MODE_NATIVE, -+ .gpio70 = GPIO_MODE_NATIVE, -+ .gpio71 = GPIO_MODE_NATIVE, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_GPIO, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio74 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c -new file mode 100644 -index 0000000000..1373975352 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ -+ 0x1028049a, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x1028049a), -+ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0xd5a301a0), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862805, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb -new file mode 100644 -index 0000000000..479d1b696e ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb -@@ -0,0 +1,39 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x049a inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x00000218" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 1, 1 }, -+ { 1, 1, 1 }, -+ { 1, 1, 2 }, -+ { 1, 1, 2 }, -+ { 1, 1, 3 }, -+ { 1, 1, 3 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 1, 7 }, -+ { 1, 1, 6 }, -+ { 1, 1, 6 }, -+ { 1, 1, 7 }, -+ }" -+ -+ device ref gbe off end -+ device ref pcie_rp4 off end -+ device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet -+ device ref sata1 on -+ register "sata_port_map" = "0x3b" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch b/config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch deleted file mode 100644 index 4a7a6bf9..00000000 --- a/config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch +++ /dev/null @@ -1,442 +0,0 @@ -From f781a8bac250d4902ec3e7caa0628c77836a8ae3 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Mon, 4 Mar 2024 18:05:43 -0700 -Subject: [PATCH 23/65] mb/dell: Add Latitude E5420 (Sandy Bridge) - -Mainboard is Krug 14". I do not physically have this system; someone -with physical access to one sent me the output of autoport which I then -modified to produce this port. I was also sent the VBT binary, which was -obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version -A02 of the vendor firmware. - -This was originally tested and found to be working as a standalone board -port in Libreboot, but this variant based port in upstream coreboot has -not been tested. - -This can be internally flashed by sending a command to the EC, which -causes the EC to pull the FDO pin low and the firmware to skip setting -up any chipset based write protections [1]. The EC is the SMSC MEC5055, -which seems to be compatible with the existing MEC5035 code. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: I0283653156083768e1fd451bcf539b4e028589f4 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e5420/data.vbt | Bin 0 -> 6144 bytes - .../variants/e5420/early_init.c | 14 ++ - .../snb_ivb_latitude/variants/e5420/gpio.c | 195 ++++++++++++++++++ - .../variants/e5420/hda_verb.c | 32 +++ - .../variants/e5420/overridetree.cb | 39 ++++ - 7 files changed, 292 insertions(+), 1 deletion(-) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index 4e94a7ef80..e6a21ffb99 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select SYSTEM_TYPE_LAPTOP - select USE_NATIVE_RAMINIT - -+config BOARD_DELL_LATITUDE_E5420 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_6144 -+ select SOUTHBRIDGE_INTEL_BD82X6X -+ - config BOARD_DELL_LATITUDE_E5520 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_6144 -@@ -60,6 +65,7 @@ config MAINBOARD_DIR - default "dell/snb_ivb_latitude" - - config MAINBOARD_PART_NUMBER -+ default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 - default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 - default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 - default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 -@@ -74,6 +80,7 @@ config USBDEBUG_HCD_INDEX - default 2 - - config VARIANT_DIR -+ default "e5420" if BOARD_DELL_LATITUDE_E5420 - default "e5520" if BOARD_DELL_LATITUDE_E5520 - default "e6420" if BOARD_DELL_LATITUDE_E6420 - default "e6520" if BOARD_DELL_LATITUDE_E6520 -@@ -82,7 +89,8 @@ config VARIANT_DIR - default "e6530" if BOARD_DELL_LATITUDE_E6530 - - config VGA_BIOS_ID -- default "8086,0116" if BOARD_DELL_LATITUDE_E6520 -+ default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \ -+ || BOARD_DELL_LATITUDE_E5420 - default "8086,0166" if BOARD_DELL_LATITUDE_E5530 - default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ - || BOARD_DELL_LATITUDE_E5520 -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index 7976691f21..a3fa2b1837 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -1,5 +1,8 @@ - ## SPDX-License-Identifier: GPL-2.0-only - -+config BOARD_DELL_LATITUDE_E5420 -+ bool "Latitude E5420" -+ - config BOARD_DELL_LATITUDE_E5520 - bool "Latitude E5520" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..98b82fe6110fd295b5749041ec7f8c084ace5f57 -GIT binary patch -literal 6144 -zcmeHKeQZ-z6hE);wSBvNZ!2$ObQ^;MgV6zl*Rhp}BXnCCMZU^_r7jRwT!kfLo8?3H -zk9)u(7?cb(hChhTM57@QFfmbMB!G!dNsO6BW5OSp5EGF^jHnTTdhUBI+h`e+1ft1q -z^SfW?+;h)4_uO+|XEfEV$91)}c;!*XQ5O -z)OU7u$J@4U+lk)#GSW%c%c)v`%R6?`w)LIyu6bD7-j0o&X9qUMcEsYlW3BU4rZRvt -zqAUpjf*qXuLCCsU0YM2I5@gB1WKd)f1+Yt?%HWd0DZxYumP(Ke?=ER{f^&}W<0k@mxff(?6+Stw+s6y%k1mM$cLk#^FWWI*9bE1GY -z&VY9?WC1u#23^3^UYw5?H0x2S2gN`x18Fko6_x(#MKyuCU_DV -zdkf*li41yW3p$*0Oo3+63kO6S91*KwP#l2i4jnc)JkUirL^$k}VbH0;CBh#BS=OLf -zW-yE3BRon75gG{_2~QIC5cUzCC%i)FCmbidM>tIwAPf>N5Pl?FC0r*+Sq!oXj!keQ -zVKcyK>TL+gc7oLco$28+FpeeXkEP}_Sea=mk#IWUR^m$!BogvszLPu83FJm0k6K*}ACcP}M4exU`*MKVwl5+t6JBpTkmm}xWflKUe~7}`!#%z#gAo{NxUrpDAndYktu -zI0}VLU`J7^xmF1AFiz5S^uzp*DPI$%$qq!(ikh0kP+(GKzF|@N?Y%_#Vp@M+xHr$F -z=%+18z`-fT%z)9-TS$~Dh@2yeN7!UIt0h`fWxUu`JvA_ra*8P48l%7KR0&c1;0R75 -z4f0oz(xQ3MWqz5>qW5M4tZWExHs8X@p!@CBU=7e{5^Jl{s7by`po-AJqM2l -znk(=^0bHkF0rUw7)^7j;$=_UIs8`6P6b-;vPDZ#U9L)W1_PAYRDP9k~;5$stt5ZiV -zD0>;i-?OlYY2}P9WVnfGos4xee2r=EGWHR}ADH$VV>cO=xU?!4TjIi)OMBYI_PX#b -zm-eBHed5BOT-x6*W>;{IqAga~G6lCQT93k>Q}CpsomJR*1%FjEkv?fuT%c-8RklXO -zU8;6KWk*zeU)4TW+1D!mrE0EhHZfbBeN{4S7X@Pig%};A99QTdA~wZruL*8y?K!jP -zG5R*k=);S}ZnA}on(uzNF -zyu>BcjA})C@bg%<;+Eh2;Sz4heFFCbZ@C{FrXMIbYzu>?Bi-|vZ}JSFU%JA>7$7et -z0Yo%CnOVZm#ZA}4kWZOn15};h5*#OM3b+6vHzgruMP>=5MNJK1y42{YgveP-!j%#( -z0rGe@8t%!=66Ti%K4|Gx=o7gFp83wQ;+s3H7+r^SKlpp3KKcr!3@|n;NCH_=qL=3T -zq3WH?en`b+W-HR-fnrhw*9aZ%M}lHX7@H?E>!6wv_&YQFEHdA$%Z1R--yub>=c@p? -z6@7Fc$&>sAxwiz{BE$1kb$K9Co=ozlA973y^i(^BM|EZ$$^y`0KyHiMJ%O*XbfEX1 -ziZaH>W(1pWL0bo|T!x__N$^$DpmxI=bL6WUK3JGyn?rw-qC4ZA$yGjIB}N(=ldD2O -zAJ@bxp2>n}u*mUIYFd>}O_wuwBD^r9<#=!0 -X1LGbT_rSOZ#yv3ZfpHH!G!Og(1Xg~J - -literal 0 -HcmV?d00001 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c -new file mode 100644 -index 0000000000..ff83db095b ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c -@@ -0,0 +1,14 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c -new file mode 100644 -index 0000000000..f76b93d9f0 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c -@@ -0,0 +1,195 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_NATIVE, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_GPIO, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_GPIO, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_NATIVE, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_GPIO, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio3 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio12 = GPIO_DIR_OUTPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_INPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+ .gpio30 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio12 = GPIO_LEVEL_HIGH, -+ .gpio30 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_NATIVE, -+ .gpio46 = GPIO_MODE_GPIO, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_NATIVE, -+ .gpio50 = GPIO_MODE_GPIO, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_GPIO, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_GPIO, -+ .gpio56 = GPIO_MODE_GPIO, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_OUTPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio46 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio50 = GPIO_DIR_OUTPUT, -+ .gpio51 = GPIO_DIR_OUTPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio53 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio55 = GPIO_DIR_OUTPUT, -+ .gpio56 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_LOW, -+ .gpio37 = GPIO_LEVEL_LOW, -+ .gpio46 = GPIO_LEVEL_HIGH, -+ .gpio50 = GPIO_LEVEL_HIGH, -+ .gpio51 = GPIO_LEVEL_LOW, -+ .gpio55 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_NATIVE, -+ .gpio69 = GPIO_MODE_NATIVE, -+ .gpio70 = GPIO_MODE_NATIVE, -+ .gpio71 = GPIO_MODE_NATIVE, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_GPIO, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio74 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c -new file mode 100644 -index 0000000000..0bc6c35a63 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ -+ 0x1028049b, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x1028049b), -+ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0xd5a30130), -+ -+ 0x80862805, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb -new file mode 100644 -index 0000000000..3f55bfd49d ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb -@@ -0,0 +1,39 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x049b inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x00000c31" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 1, 1 }, -+ { 1, 1, 1 }, -+ { 1, 1, 2 }, -+ { 1, 1, 2 }, -+ { 1, 1, 3 }, -+ { 1, 1, 3 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 1, 7 }, -+ { 1, 1, 6 }, -+ { 1, 1, 6 }, -+ { 1, 1, 7 }, -+ }" -+ -+ device ref gbe off end -+ device ref pcie_rp4 off end -+ device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet -+ device ref sata1 on -+ register "sata_port_map" = "0x3b" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0023-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch b/config/coreboot/default/patches/0023-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch new file mode 100644 index 00000000..f9d80b9f --- /dev/null +++ b/config/coreboot/default/patches/0023-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch @@ -0,0 +1,51 @@ +From d86824305f11bc684f1e91e3826158b8c7d7e0ee Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Sat, 6 Apr 2024 01:22:47 +0100 +Subject: [PATCH 23/51] nb/haswell: Fully disable iGPU when dGPU is used + +My earlier patch disabled decode *and* disabled the iGPU itself, but +a subsequent revision disabled only VGA decode. Upon revisiting, I +found that, actually, yes, you also need to disable the iGPU entirely. + +Tested on Dell 9020 SFF using broadwell MRC, with both iGPU and dGPU. +With this patch, the iGPU is completely disabled when you install a +graphics card, but the iGPU is available to use when no graphics card +is present. + +For more context, see: + +Author: Leah Rowe +Date: Fri Feb 23 13:33:31 2024 +0000 + + nb/haswell: Disable iGPU when dGPU is used + +And look at the Gerrit comments: + +https://review.coreboot.org/c/coreboot/+/80717/ + +So, my original submission on change 80717 was actually correct. +This patch fixes the issue. I tested on iGPU and dGPU, with both +broadwell and haswell mrc.bin. + +Signed-off-by: Leah Rowe +--- + src/northbridge/intel/haswell/gma.c | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c +index f7fad3183d..1b188e92e1 100644 +--- a/src/northbridge/intel/haswell/gma.c ++++ b/src/northbridge/intel/haswell/gma.c +@@ -466,6 +466,9 @@ static void gma_func0_disable(struct device *dev) + { + /* Disable VGA decode */ + pci_or_config16(pcidev_on_root(0, 0), GGC, 1 << 1); ++ ++ /* Required or else the graphics card doesn't work */ ++ dev->enabled = 0; + } + + static struct device_operations gma_func0_ops = { +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0024-ec-dell-mec5035-Replace-defines-with-enums.patch b/config/coreboot/default/patches/0024-ec-dell-mec5035-Replace-defines-with-enums.patch new file mode 100644 index 00000000..6c1118bb --- /dev/null +++ b/config/coreboot/default/patches/0024-ec-dell-mec5035-Replace-defines-with-enums.patch @@ -0,0 +1,91 @@ +From a1566875789469ebd91e472301be4b359aac0a4c Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Tue, 28 May 2024 17:23:21 -0600 +Subject: [PATCH 24/51] ec/dell/mec5035: Replace defines with enums + +Instead of using defines for command IDs and argument values, use enums +to provide more type safety. This also has the effect of moving the +command IDs to a more central location instead of defines spread out +throughout the header. + +Change-Id: I788531e8b70e79541213853f177326d217235ef2 +Signed-off-by: Nicholas Chin +Reviewed-on: https://review.coreboot.org/c/coreboot/+/82998 +Tested-by: build bot (Jenkins) +Reviewed-by: Felix Singer +--- + src/ec/dell/mec5035/mec5035.c | 10 +++++----- + src/ec/dell/mec5035/mec5035.h | 20 ++++++++++++-------- + 2 files changed, 17 insertions(+), 13 deletions(-) + +diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c +index 68b6b2f7fb..dffbb7960c 100644 +--- a/src/ec/dell/mec5035/mec5035.c ++++ b/src/ec/dell/mec5035/mec5035.c +@@ -66,17 +66,17 @@ static enum cb_err write_mailbox_regs(const u8 *data, u8 start, u8 count) + return CB_SUCCESS; + } + +-static void ec_command(u8 cmd) ++static void ec_command(enum mec5035_cmd cmd) + { + outb(0, MAILBOX_INDEX); +- outb(cmd, MAILBOX_DATA); ++ outb((u8)cmd, MAILBOX_DATA); + wait_ec(); + } + +-u8 mec5035_mouse_touchpad(u8 setting) ++u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting) + { +- u8 buf[15] = {0}; +- write_mailbox_regs(&setting, 2, 1); ++ u8 buf[15] = {(u8)setting}; ++ write_mailbox_regs(buf, 2, 1); + ec_command(CMD_MOUSE_TP); + /* The vendor firmware reads 15 bytes starting at index 1, presumably + to get some sort of return code. Though I don't know for sure if +diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h +index fa15a9d621..32f791cb01 100644 +--- a/src/ec/dell/mec5035/mec5035.h ++++ b/src/ec/dell/mec5035/mec5035.h +@@ -7,16 +7,20 @@ + + #define NUM_REGISTERS 32 + ++enum mec5035_cmd { ++ CMD_MOUSE_TP = 0x1a, ++ CMD_RADIO_CTRL = 0x2b, ++ CMD_CPU_OK = 0xc2, ++}; ++ + /* Touchpad (TP) and mouse related. The EC seems to + default to 0 which results in the TP not working. */ +-#define CMD_MOUSE_TP 0x1a +-#define SERIAL_MOUSE 0 /* Disable TP, force use of a serial mouse */ +-#define PS2_MOUSE 1 /* Disable TP when using a PS/2 mouse */ +-#define TP_PS2_MOUSE 2 /* Leave TP enabled when using a PS/2 mouse */ +- +-#define CMD_CPU_OK 0xc2 ++enum ec_mouse_setting { ++ SERIAL_MOUSE = 0, /* Disable TP, force use of a serial mouse */ ++ PS2_MOUSE, /* Disable TP when using a PS/2 mouse */ ++ TP_PS2_MOUSE /* Leave TP enabled when using a PS/2 mouse */ ++}; + +-#define CMD_RADIO_CTRL 0x2b + #define RADIO_CTRL_NUM_ARGS 3 + enum ec_radio_dev { + RADIO_WLAN = 0, +@@ -29,7 +33,7 @@ enum ec_radio_state { + RADIO_ON + }; + +-u8 mec5035_mouse_touchpad(u8 setting); ++u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting); + void mec5035_cpu_ok(void); + void mec5035_early_init(void); + void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state); +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0024-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch b/config/coreboot/default/patches/0024-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch deleted file mode 100644 index 9ae5ce64..00000000 --- a/config/coreboot/default/patches/0024-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch +++ /dev/null @@ -1,435 +0,0 @@ -From 85a0905b600c1f532c462047941da6e7c2bb47c2 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Wed, 7 Feb 2024 15:23:46 -0700 -Subject: [PATCH 24/65] mb/dell: Add Latitude E6320 (Sandy Bridge) - -Mainboard is PAL70/LA-6611P. I do not physically have this system; -someone with physical access to one sent me the output of autoport which -I then modified to produce this port. I was also sent the VBT binary, -which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running -version A22 of the vendor firmware. This port has not been tested. - -The EC is the SMSC MEC5055, which seems to be compatible with the -existing MEC5035 code. As with the other Dell systems with this EC, this -board is assumed to be internally flashable using an EC command that -tells it to pull the FDO pin low on the next boot, which also tells the -vendor firmware to disable all write protections to the flash [1]. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: I5905f8c6a8dbad56e03bdeedc2179600d0c4ba46 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 11 +- - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e6320/data.vbt | Bin 0 -> 6144 bytes - .../variants/e6320/early_init.c | 17 ++ - .../snb_ivb_latitude/variants/e6320/gpio.c | 190 ++++++++++++++++++ - .../variants/e6320/hda_verb.c | 32 +++ - .../variants/e6320/overridetree.cb | 35 ++++ - 7 files changed, 287 insertions(+), 1 deletion(-) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index e6a21ffb99..84ffe1d33a 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -27,6 +27,12 @@ config BOARD_DELL_LATITUDE_E5520 - select BOARD_ROMSIZE_KB_6144 - select SOUTHBRIDGE_INTEL_BD82X6X - -+config BOARD_DELL_LATITUDE_E6320 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_10240 -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select SOUTHBRIDGE_INTEL_BD82X6X -+ - config BOARD_DELL_LATITUDE_E6420 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_10240 -@@ -67,6 +73,7 @@ config MAINBOARD_DIR - config MAINBOARD_PART_NUMBER - default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 - default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 -+ default "Latitude E6320" if BOARD_DELL_LATITUDE_E6320 - default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 - default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 - default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 -@@ -82,6 +89,7 @@ config USBDEBUG_HCD_INDEX - config VARIANT_DIR - default "e5420" if BOARD_DELL_LATITUDE_E5420 - default "e5520" if BOARD_DELL_LATITUDE_E5520 -+ default "e6320" if BOARD_DELL_LATITUDE_E6320 - default "e6420" if BOARD_DELL_LATITUDE_E6420 - default "e6520" if BOARD_DELL_LATITUDE_E6520 - default "e5530" if BOARD_DELL_LATITUDE_E5530 -@@ -93,7 +101,8 @@ config VGA_BIOS_ID - || BOARD_DELL_LATITUDE_E5420 - default "8086,0166" if BOARD_DELL_LATITUDE_E5530 - default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ -- || BOARD_DELL_LATITUDE_E5520 -+ || BOARD_DELL_LATITUDE_E5520 \ -+ || BOARD_DELL_LATITUDE_E6320 - default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ - || BOARD_DELL_LATITUDE_E6530 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index a3fa2b1837..ef6a1329a9 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -6,6 +6,9 @@ config BOARD_DELL_LATITUDE_E5420 - config BOARD_DELL_LATITUDE_E5520 - bool "Latitude E5520" - -+config BOARD_DELL_LATITUDE_E6320 -+ bool "Latitude E6320" -+ - config BOARD_DELL_LATITUDE_E6420 - bool "Latitude E6420" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..471a9e29da639dd496f3ecebd5d0754a9045c00b -GIT binary patch -literal 6144 -zcmeHKeP|p-6#wn*-rZ(yH@R-odPzTgZEU>S#_pv}j2iKhT+^%8_DtJw21|4GP8*0x -zyw;EYW49XozzTOX?48xuwV5_`Zb)3w)w?dSc1`nTL|NF_SMw&<<)v%g#!cH2otrzi -zb*Kq!PUMaJadUHE-`5SWCb4_6i;5Aj(6hQGK -zcq^2uUt5sS5YSMiL+CJcs0#cVOdTN|K@D>?tkF=dqenwjM^Z-^K2z~&z+xRs!o^Jx -zkUGd?>QtXw8V(I09OiMb0DZy>`=tO^#BCssw{}bkOnj=#Ic!~!6!J*{`jbEv5O4)- -zg-UBlIa$c9Pg4C;0_-wq3t+dbZfn1wBi@zhNnWx()w{Vb-G8OC_m*478gTrX3U*a1 -zHr@yrOO78dFPXES1q3mHj9 -zFXKwa)r^}Mw=nKzJjj?}>}NdBc$G29IK=pr@de`u;}}D$5~yYbw&Hlf=OF0X?I=Y$ -z$D`mgy>}U$hl}G6m&PmXveHnY5DenC!g~=E3i?HIrEpyk>_(-IsVtEqUEoqxrDFdq -zrYwhOv0o^NgW$OKN}=$7Z-w5*Vuv?T3~uuFGwP92?Qr8n0iQp=u*7rep9Q8dW#?ZI -zFly1ww^^l*+YC6t16l_{g}tVVpVZ0fDk%5+`|+*688vr-uYP8$M=#caX6OWA1Ez395U -z%xCIZibyRlE~I0-ianVaz~q|EMlL7hc1U5w?}Kekws6fyy@`e -z4NdX%L#2`A#c_N4ftGmuwbDo=incwf=WnBJk6)fYz%6Cmy>HwK$Y|iP`Y7sgjDPhQ -zR|wv367k}1g)-G@kXq(X;{Bjt998b9{cpD9zGhOQ5%$4OSMtc2(gO(fCMTS^w(6xrO#}IcK^sHgMZis^heP>uIf6|z=%Cy#)Vxvjdo7U~7*k{rU -zruB{~J}~KL(+X9Kxz*-5M>NNGSaIfXi19({d4mrk?K50@R0%Wn*PP9d(MMIzI2~RX -z)(4h&8(YL@UyKJ*)4o${n5ZGd(hDf+)cv8sSBxWen|f*u<-sgt(u+U-bkd}Tj+5@9 -zJosfSdvPo8zGnluemJg=E7A{=NQwFch>PUO1w -z=6JffnB-kQ)VLb>sSZdDrI@U2!?HLA9Mlek!*k>;&jx<)xfnBiY^I6DRt*l*`n8ly -zu!h)b?sRV1==Nf*Cw9&&i7n^9Nts>wk>adaY&E5OdW*A?iI}v+E6GGlsR<+#%jpl^ -zGzqhDjj3zr60Bgh=l{NzJp$x#fCR%*8!ZR?fC&JuvHmSr5#5VAcb(9+>sO -IzvhA80TAzedH?_b - -literal 0 -HcmV?d00001 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c -new file mode 100644 -index 0000000000..b0c4638858 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c -@@ -0,0 +1,17 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include -+ -+const struct southbridge_usb_port mainboard_usb_ports[] = { -+}; -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c -new file mode 100644 -index 0000000000..61f01816c4 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c -@@ -0,0 +1,190 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_NATIVE, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_NATIVE, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_GPIO, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_INPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+ .gpio30 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio30 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_OUTPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_HIGH, -+ .gpio45 = GPIO_LEVEL_LOW, -+ .gpio49 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c -new file mode 100644 -index 0000000000..2e3f7fa697 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ -+ 0x10280492, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x10280492), -+ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862805, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb -new file mode 100644 -index 0000000000..3bfe6b57ed ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb -@@ -0,0 +1,35 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x0492 inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x00000622" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 0, 0 }, -+ { 1, 1, 1 }, -+ { 1, 0, 1 }, -+ { 1, 1, 2 }, -+ { 1, 1, 2 }, -+ { 1, 1, 3 }, -+ { 1, 1, 3 }, -+ { 1, 0, 5 }, -+ { 1, 0, 5 }, -+ { 1, 1, 7 }, -+ { 1, 1, 6 }, -+ { 1, 0, 6 }, -+ { 1, 0, 7 }, -+ }" -+ -+ device ref sata1 on -+ register "sata_port_map" = "0x3b" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0025-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch b/config/coreboot/default/patches/0025-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch new file mode 100644 index 00000000..ed620a3e --- /dev/null +++ b/config/coreboot/default/patches/0025-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch @@ -0,0 +1,147 @@ +From 2fdd5bbb2bbec76c3c2238c4cd471b9b63073942 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Fri, 3 May 2024 11:03:32 -0600 +Subject: [PATCH 25/51] ec/dell/mec5035: Add S3 suspend SMI handler + +This is necessary for S3 resume to work on SNB and newer Dell Latitude +laptops. If a command isn't sent, the EC cuts power to the DIMMs, +preventing the system from resuming. These commands were found using an +FPGA to log all LPC bus transactions between the host and the EC and +then narrowing down which ones were actually necessary. + +Interestingly, the command IDs appear to be identical to those in +ec/google/wilco, the EC used on Dell Latitude Chromebooks, and that EC +implements a similar S3 SMI handler as the one implemented in this +commit. The Wilco EC Kconfig does suggest that its firmware is a +modified version of Dell's usual Latitude EC firmware, so the +similarities seem to be intentional. + +These similarities also identified a command to enable or disable wake +sources like the power button and lid switch, and this was added to the +SMI handler to disable lid wake as the system does not yet resume +properly from a like wake with coreboot. + +Tested on the Latitude E6430 (Ivy Bridge) and the Precision M6800 +(Haswell, not yet pushed). + +Change-Id: I655868aba46911d128f6c24f410dc6fdf83f3070 +Signed-off-by: Nicholas Chin +--- + src/ec/dell/mec5035/Makefile.mk | 1 + + src/ec/dell/mec5035/mec5035.c | 14 ++++++++++++++ + src/ec/dell/mec5035/mec5035.h | 22 ++++++++++++++++++++++ + src/ec/dell/mec5035/smihandler.c | 17 +++++++++++++++++ + 4 files changed, 54 insertions(+) + create mode 100644 src/ec/dell/mec5035/smihandler.c + +diff --git a/src/ec/dell/mec5035/Makefile.mk b/src/ec/dell/mec5035/Makefile.mk +index 4ebdd811f9..be557e4599 100644 +--- a/src/ec/dell/mec5035/Makefile.mk ++++ b/src/ec/dell/mec5035/Makefile.mk +@@ -5,5 +5,6 @@ ifeq ($(CONFIG_EC_DELL_MEC5035),y) + bootblock-y += mec5035.c + romstage-y += mec5035.c + ramstage-y += mec5035.c ++smm-y += mec5035.c smihandler.c + + endif +diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c +index dffbb7960c..85c2ab0140 100644 +--- a/src/ec/dell/mec5035/mec5035.c ++++ b/src/ec/dell/mec5035/mec5035.c +@@ -94,6 +94,20 @@ void mec5035_control_radio(enum ec_radio_dev dev, enum ec_radio_state state) + ec_command(CMD_RADIO_CTRL); + } + ++void mec5035_change_wake(u8 source, enum ec_wake_change change) ++{ ++ u8 buf[ACPI_WAKEUP_NUM_ARGS] = {change, source, 0, 0x40}; ++ write_mailbox_regs(buf, 2, ACPI_WAKEUP_NUM_ARGS); ++ ec_command(CMD_ACPI_WAKEUP_CHANGE); ++} ++ ++void mec5035_sleep_enable(void) ++{ ++ u8 buf[SLEEP_EN_NUM_ARGS] = {3, 0}; ++ write_mailbox_regs(buf, 2, SLEEP_EN_NUM_ARGS); ++ ec_command(CMD_SLEEP_ENABLE); ++} ++ + void mec5035_early_init(void) + { + /* If this isn't sent the EC shuts down the system after about 15 +diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h +index 32f791cb01..8d4fded28b 100644 +--- a/src/ec/dell/mec5035/mec5035.h ++++ b/src/ec/dell/mec5035/mec5035.h +@@ -4,12 +4,15 @@ + #define _EC_DELL_MEC5035_H_ + + #include ++#include + + #define NUM_REGISTERS 32 + + enum mec5035_cmd { + CMD_MOUSE_TP = 0x1a, + CMD_RADIO_CTRL = 0x2b, ++ CMD_ACPI_WAKEUP_CHANGE = 0x4a, ++ CMD_SLEEP_ENABLE = 0x64, + CMD_CPU_OK = 0xc2, + }; + +@@ -33,9 +36,28 @@ enum ec_radio_state { + RADIO_ON + }; + ++#define ACPI_WAKEUP_NUM_ARGS 4 ++enum ec_wake_change { ++ WAKE_OFF = 0, ++ WAKE_ON ++}; ++ ++/* Copied from ec/google/wilco/commands.h. Not sure if these all apply */ ++enum ec_acpi_wake_events { ++ EC_ACPI_WAKE_PWRB = BIT(0), /* Wake up by power button */ ++ EC_ACPI_WAKE_LID = BIT(1), /* Wake up by lid switch */ ++ EC_ACPI_WAKE_RTC = BIT(5), /* Wake up by RTC */ ++}; ++ ++#define SLEEP_EN_NUM_ARGS 2 ++ + u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting); + void mec5035_cpu_ok(void); + void mec5035_early_init(void); + void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state); ++void mec5035_change_wake(u8 source, enum ec_wake_change change); ++void mec5035_sleep_enable(void); ++ ++void mec5035_smi_sleep(int slp_type); + + #endif /* _EC_DELL_MEC5035_H_ */ +diff --git a/src/ec/dell/mec5035/smihandler.c b/src/ec/dell/mec5035/smihandler.c +new file mode 100644 +index 0000000000..958733bf97 +--- /dev/null ++++ b/src/ec/dell/mec5035/smihandler.c +@@ -0,0 +1,17 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++#include ++#include "mec5035.h" ++ ++void mec5035_smi_sleep(int slp_type) ++{ ++ switch (slp_type) { ++ case ACPI_S3: ++ /* System does not yet resume properly if woken by lid */ ++ mec5035_change_wake(EC_ACPI_WAKE_LID, WAKE_OFF); ++ mec5035_sleep_enable(); ++ break; ++ } ++} +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0025-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch b/config/coreboot/default/patches/0025-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch deleted file mode 100644 index 668c0063..00000000 --- a/config/coreboot/default/patches/0025-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch +++ /dev/null @@ -1,438 +0,0 @@ -From 817b0d543444e52ddfde536ded52509456dcbbf2 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Fri, 8 Mar 2024 09:27:36 -0700 -Subject: [PATCH 25/65] mb/dell: Add Latitude E6220 (Sandy Bridge) - -Mainboard is codenamed Vida. I do not physically have this system; -someone with physical access to one sent me the output of autoport which -I then modified to produce this port. The VBT was obtained using -intelvbttool while running version A14 (latest available version) of the -vendor firmware. - -Tested and found to boot as part of a libreboot build based on upstream -coreboot commit b7341da191 with additional patches, though these do not -appear to affect SNB/IVB. The base E6430 patch was tested against -coreboot main. - -The EC is the SMSC MEC5055, which seems to be compatible with the -existing MEC5035 code. As with the other Dell systems with this EC, this -board is assumed to be internally flashable using an EC command that -tells it to pull the FDO pin low on the next boot, which also tells the -vendor firmware to disable all write protections to the flash [1]. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: I570023b0837521b75aac6d5652c74030c06b8a4c -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 9 + - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e6220/data.vbt | Bin 0 -> 3985 bytes - .../variants/e6220/early_init.c | 14 ++ - .../snb_ivb_latitude/variants/e6220/gpio.c | 192 ++++++++++++++++++ - .../variants/e6220/hda_verb.c | 32 +++ - .../variants/e6220/overridetree.cb | 37 ++++ - 7 files changed, 287 insertions(+) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index 84ffe1d33a..baa83baa41 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -27,6 +27,12 @@ config BOARD_DELL_LATITUDE_E5520 - select BOARD_ROMSIZE_KB_6144 - select SOUTHBRIDGE_INTEL_BD82X6X - -+config BOARD_DELL_LATITUDE_E6220 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_10240 -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select SOUTHBRIDGE_INTEL_BD82X6X -+ - config BOARD_DELL_LATITUDE_E6320 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_10240 -@@ -73,6 +79,7 @@ config MAINBOARD_DIR - config MAINBOARD_PART_NUMBER - default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 - default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 -+ default "Latitude E6220" if BOARD_DELL_LATITUDE_E6220 - default "Latitude E6320" if BOARD_DELL_LATITUDE_E6320 - default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 - default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 -@@ -89,6 +96,7 @@ config USBDEBUG_HCD_INDEX - config VARIANT_DIR - default "e5420" if BOARD_DELL_LATITUDE_E5420 - default "e5520" if BOARD_DELL_LATITUDE_E5520 -+ default "e6220" if BOARD_DELL_LATITUDE_E6220 - default "e6320" if BOARD_DELL_LATITUDE_E6320 - default "e6420" if BOARD_DELL_LATITUDE_E6420 - default "e6520" if BOARD_DELL_LATITUDE_E6520 -@@ -102,6 +110,7 @@ config VGA_BIOS_ID - default "8086,0166" if BOARD_DELL_LATITUDE_E5530 - default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ - || BOARD_DELL_LATITUDE_E5520 \ -+ || BOARD_DELL_LATITUDE_E6220 \ - || BOARD_DELL_LATITUDE_E6320 - default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ - || BOARD_DELL_LATITUDE_E6530 -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index ef6a1329a9..349ee7f79e 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -6,6 +6,9 @@ config BOARD_DELL_LATITUDE_E5420 - config BOARD_DELL_LATITUDE_E5520 - bool "Latitude E5520" - -+config BOARD_DELL_LATITUDE_E6220 -+ bool "Latitude E6220" -+ - config BOARD_DELL_LATITUDE_E6320 - bool "Latitude E6320" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..548075a74500b5d159108089ee29cff802d07db7 -GIT binary patch -literal 3985 -zcmdT{eP|p-6#wn*-rZ(yH@R-odPzTgZQ6LXjonL|7&YQ0xu#d`$C=h}21|4GP8*0x -zyjE@hv0Dv(P?c0g{G(_DMJZ@22r8oZ0U9lcR8a)~s33wOSg|T<^?b8?XBzL?#)6`A -z{N~Nfd-LYan>TOv7WZ{+rcIq264!S1u1&02-MpSC3mf}u-r~BvbgkXEX=|c$bLZBs -zbsM{{q9-s1nVR3f2C|A`nJsqvC7UwC+1=angV`H%w4saofx<^KL=Lc`x -zzLTQeOW7vdZsuwwtsUOU>vxajM=zqzp&{y(GCQa@weIb%fzF6`uwy)UhaB+ynus -zBRr-~^|__t=m5fD9tR81r@XLV3UEc-2I6>o`;@@MXS$rj)&)r+pA?|K2vh+9SHM=N -zw3d{Uh1~iK)juV`E`v4?cFU@^_DehBU5TFLmFrTyoBPuJ*ExIdxO1!lC!eceSG8i} -z&Aivl*T2}Cf;*vEJvsN-nR!WWDm8M^Zmcltu96wMRudvHXLxn;xh~EqEM^Gr}m&=vHbwRKjl{%)fM2d8tOI4MM{l!dK -z4$)%2P!LDJaqX2t;s4$Wy@Q1gZ=x97KlhsvF9`g6&TYocZ_JQN=A1hUE#+kAD@E9jJd7%}~ -zMLIYMDVoel8h1}$+_YJF%DJ&-O)X~`ZoroouO-yDsj)OrPU{{+ph4LJKdD;Bi3a3T -zbe?Tf8&elW+H+t;5$y~|nhq{o@?k1^-Hg%jhcu{xJyzvgk`0m*Te#GQe$ -z2IjOP{U&oF$`&WsuJN2!=fTnT^W)PwhnW-Ya3)3%H!`OUfy6?#V9r%+wCY}TU0!Cl -z*kjeex}MZl_aWVoxhXfp&Ur~>>k;onlO4II%~KY!FT|r)!;agdwcf~rXIAVwc6CEj -zJpE{CBzZ;L-gdYp9)GC8f@wZ%=YBfkLb0_gZP%us?_tgG3TXJ7BDbWb~V23Mt{QT(?mOc#ihbo#YtY#rD -z7PLiJBSP#J^tiB|7vdE`p9|}IA$}9o7_wSJ;))RELe^~|u{T6dhpd-F;;j&U6|#N} -z3BN(h4C``3tTE^&!`fqrdks2dSZ^5Oh(X^Omdc+rCapBB)uz~J(k-TSw<-3U^rC6K -zYl;s|`q{KX)nazFdEs%*@f}l~SsY?~kb2(WgGl=fm!43>4I&2(k1$iaK?FYVZ}~h~1{1T|;>=%b4`yk3XF>siEVHyC@HS -z8OvVW%DeB`K&~H7>f?&^gQU_A0oM;p0b*k61j!x*S5X(-unS`9rZ -zG}=vb+R*x})DSq-Q7;uJwKLPuG`Ej6G}#nch4dSqhHo0B2Gq%HbgCyS+pwZ3{?fph -z!Jo*Dxcw7v7a#rIU2IRmVn4KE$x~88+a7J4zd|_!%xo9z$+P;Q6qA*AQ5FvzlPW^f -zY&aJUhO1#_o~&$x>1qJKGpC+K<(u_&1197VVWxipk10ERAEpLG3^|JWI~DYG*_Qk)fwt)g^KZ*f*K5tEj9C7Ea`HGyPe8U4wd -nX2Iz@%Q6UTm;}-X%j^D0i1fiT)I6)4TdrsMY}`L( -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c -new file mode 100644 -index 0000000000..2306e4cf0a ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c -@@ -0,0 +1,192 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_GPIO, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_NATIVE, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_GPIO, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio1 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_INPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+ .gpio30 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio30 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio1 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_OUTPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_HIGH, -+ .gpio45 = GPIO_LEVEL_LOW, -+ .gpio49 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c -new file mode 100644 -index 0000000000..0c69f0bd0e ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ -+ 0x102804a9, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x102804a9), -+ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862805, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb -new file mode 100644 -index 0000000000..9faf27e27b ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb -@@ -0,0 +1,37 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x04a9 inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x0000046a" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }" -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 0, 0 }, -+ { 1, 1, 1 }, -+ { 1, 0, 1 }, -+ { 1, 1, 2 }, -+ { 1, 1, 2 }, -+ { 1, 1, 3 }, -+ { 1, 1, 3 }, -+ { 1, 0, 5 }, -+ { 1, 0, 5 }, -+ { 1, 1, 7 }, -+ { 1, 1, 6 }, -+ { 1, 0, 6 }, -+ { 1, 0, 7 }, -+ }" -+ -+ device ref pcie_rp4 off end -+ device ref sata1 on -+ register "sata_port_map" = "0x3b" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0026-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch b/config/coreboot/default/patches/0026-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch deleted file mode 100644 index d88e97b3..00000000 --- a/config/coreboot/default/patches/0026-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch +++ /dev/null @@ -1,436 +0,0 @@ -From 48347cf8bc52db7a454a7be8cbc6f9d9eb67b8b0 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Fri, 8 Mar 2024 09:33:03 -0700 -Subject: [PATCH 26/65] mb/dell: Add Latitude E6330 (Ivy Bridge) - -Mainboard is QAL70/LA-7741P. I do not physically have this system; -someone with physical access to one sent me the output of autoport which -I then modified to produce this port. I was also sent the VBT binary, -which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running -version A21 of the vendor firmware. This port has not been tested. - -The EC is the SMSC MEC5055, which seems to be compatible with the -existing MEC5035 code. As with the other Dell systems with this EC, this -board is assumed to be internally flashable using an EC command that -tells it to pull the FDO pin low on the next boot, which also tells the -vendor firmware to disable all write protections to the flash [1]. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Change-Id: I827826e9ff8a9a534c50250458b399104478e06c -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 11 +- - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e6330/data.vbt | Bin 0 -> 6144 bytes - .../variants/e6330/early_init.c | 14 ++ - .../snb_ivb_latitude/variants/e6330/gpio.c | 192 ++++++++++++++++++ - .../variants/e6330/hda_verb.c | 32 +++ - .../variants/e6330/overridetree.cb | 37 ++++ - 7 files changed, 288 insertions(+), 1 deletion(-) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index baa83baa41..49bf225fe2 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -56,6 +56,12 @@ config BOARD_DELL_LATITUDE_E5530 - select BOARD_ROMSIZE_KB_12288 - select SOUTHBRIDGE_INTEL_C216 - -+config BOARD_DELL_LATITUDE_E6330 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_12288 -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select SOUTHBRIDGE_INTEL_C216 -+ - config BOARD_DELL_LATITUDE_E6430 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_12288 -@@ -84,6 +90,7 @@ config MAINBOARD_PART_NUMBER - default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 - default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 - default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 -+ default "Latitude E6330" if BOARD_DELL_LATITUDE_E6330 - default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 - default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 - -@@ -101,13 +108,15 @@ config VARIANT_DIR - default "e6420" if BOARD_DELL_LATITUDE_E6420 - default "e6520" if BOARD_DELL_LATITUDE_E6520 - default "e5530" if BOARD_DELL_LATITUDE_E5530 -+ default "e6330" if BOARD_DELL_LATITUDE_E6330 - default "e6430" if BOARD_DELL_LATITUDE_E6430 - default "e6530" if BOARD_DELL_LATITUDE_E6530 - - config VGA_BIOS_ID - default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \ - || BOARD_DELL_LATITUDE_E5420 -- default "8086,0166" if BOARD_DELL_LATITUDE_E5530 -+ default "8086,0166" if BOARD_DELL_LATITUDE_E5530 \ -+ || BOARD_DELL_LATITUDE_E6330 - default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ - || BOARD_DELL_LATITUDE_E5520 \ - || BOARD_DELL_LATITUDE_E6220 \ -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index 349ee7f79e..d6fc8eb224 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -21,6 +21,9 @@ config BOARD_DELL_LATITUDE_E6520 - config BOARD_DELL_LATITUDE_E5530 - bool "Latitude E5530" - -+config BOARD_DELL_LATITUDE_E6330 -+ bool "Latitude E6330" -+ - config BOARD_DELL_LATITUDE_E6430 - bool "Latitude E6430" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..18856746656058651c571ecbb3708e0543b19d62 -GIT binary patch -literal 6144 -zcmeHKU2GiH75-*tc6WAmW_LYygMSkDB*E^Q*zv5f7dLg)@$NQV2a{}!yImnfyvQ4D -z;n-$v0!RpNi<_o@ktI-@2a590stC0zRi%iRR%stvi&hAs3RvNXNl&Dsr*z_6HAP5GJeST -znX2JD;{xLa#;c6KGychVn-L6YXkv6Qx)}Y8&ok1DI~ZSM6dCt39%QUAzRh@o@gqjy -zL0qZ&DhN8ZR3xu$a$Cd{oasU3DNp{CCl6f~PYlq!Hte;Ia0^wn8Vut7>Wl1)s`^E- -z1DhGxzr8&7h}dMJ3~YBe;)!vVf-T&?{PoMvvRR{!67;Xhz^g^loX -zja+*c-KJJoxbsm3pTE4THs`cgD{Pt+ga3en-i$P#9Wsra(oqRMr;H$4{gxr)9eF(x -zg0v@a7aj}rA^Kf#sNb*>at^>P)5li%ycOq*4e;3~RUj$i1e8=rHi&Y_gP4= -zxz9^%q0dLXqC&Bq<&sDScZwvatjRxB=rcJJiYb?w#4Iy2KTk1F6T>T}E@(DNGa>5R -z7&Yv)JdHrRI};pfsKLVj=FE=U*=*T4#ncVktknoGelT||SDY`+9WI_IZE`_>@wb<-RI-lu(_~Oy_Zo6={Cdq!uw(fmyz_u^cB&~5IS7g`U -zdUC}N$J5-C)|`CfUO+?xptr@*hJW$ZhBZk%JaMh_<8!ZGj)z*WU9fcg2`>dT##_?q -z=Ksx}uxo3jTHTq%E1}97UECE@r}nt3I=3R(HOL7jNg>teSM-g$aU#`3jk}#qh;D?6 -zw=CYuA2#mS+vU%0P&u8RCn4)$8VH-2uy#01%VG0WSX&Fz`LMYj)?NgH_zzWS)G2Pn=k3wYdU|DnWmxbG$>`5lZJMWL92%O14BD!(C-cNFNXFH -zgVc!G9?@=&(4mNVcSJiLq3=b^rz6@k5qdFVUW{m$A{2|7d!kxz)VSrcQt@4sDoq^f -z98hXm=YS~qbfiR|LbzHLa*mLXlH${^b4c9%>9%)HO-?LA1gT0mlz!M}8&;(;^x| -z*H22;juB|7F+k?y(_2~3@STqQ@f^sqD2c8g3x>ciM%siMq~;pKwfE57kw2K@ -z!-ZN0QTVOP@aA5@fEGKjy2+D`t?2KzpPyRQ`JcmHJoc(<#hvyF -zewtgef*II~y;k>*B!+(8*blXsY-~kcJa9zG2yfcMCt+|-0ex$pY`h1<*#rEv=~*<+ -ztV``Um!q33-Aap9fUshX^N~GS2@X3^U9+MwgYQ74^?~6&yU^#oY#cvC9R_}P2d -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN -+ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN -+ | COMB_LPC_EN | COMA_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c -new file mode 100644 -index 0000000000..777570765a ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c -@@ -0,0 +1,192 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_GPIO, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_GPIO, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_NATIVE, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio1 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio3 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_OUTPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio28 = GPIO_LEVEL_LOW, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+ .gpio30 = GPIO_RESET_RSMRST, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio13 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_INPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_HIGH, -+ .gpio45 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c -new file mode 100644 -index 0000000000..804733b172 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76df, /* Codec Vendor / Device ID: IDT */ -+ 0x10280533, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x10280533), -+ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862806, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb -new file mode 100644 -index 0000000000..4125159367 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb -@@ -0,0 +1,37 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x0533 inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x00001312" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "usb_port_config" = "{ -+ { 1, 2, 0 }, -+ { 1, 0, 0 }, -+ { 1, 0, 1 }, -+ { 1, 1, 1 }, -+ { 1, 1, 2 }, -+ { 1, 1, 2 }, -+ { 1, 2, 3 }, -+ { 1, 2, 3 }, -+ { 1, 2, 4 }, -+ { 1, 1, 4 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 2, 6 }, -+ { 1, 0, 6 }, -+ }" -+ -+ device ref xhci on -+ register "superspeed_capable_ports" = "0x0000000f" -+ register "xhci_overcurrent_mapping" = "0x00000c03" -+ register "xhci_switchable_ports" = "0x0000000f" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0026-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch b/config/coreboot/default/patches/0026-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch new file mode 100644 index 00000000..fe9034b0 --- /dev/null +++ b/config/coreboot/default/patches/0026-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch @@ -0,0 +1,55 @@ +From ce7d65790b9b8656ebbaa0ca715adff6a9c25588 Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Sat, 4 May 2024 02:00:53 +0100 +Subject: [PATCH 26/51] nb/haswell: lock policy regs when disabling IOMMU + +Angel Pons told me I should do it. See comments here: +https://review.coreboot.org/c/coreboot/+/81016 + +I see no harm in complying with the request. I'll merge +this into the main patch at a later date and try to +get this upstreamed. + +Just a reminder: on Optiplex 9020 variants, Xorg locks up +under Linux when tested with a graphics card; disabling +IOMMU works around the issue. Intel graphics work just fine +with IOMMU turned on. Libreboot disables IOMMU by default, +on the 9020, so that users can install graphics cards easily. + +Signed-off-by: Leah Rowe +--- + src/northbridge/intel/haswell/early_init.c | 15 +++++++-------- + 1 file changed, 7 insertions(+), 8 deletions(-) + +diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c +index 1a7e0b1076..e9506ee830 100644 +--- a/src/northbridge/intel/haswell/early_init.c ++++ b/src/northbridge/intel/haswell/early_init.c +@@ -160,17 +160,16 @@ static void haswell_setup_iommu(void) + const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A); + u8 enable_iommu = get_uint_option("iommu", 1); + +- if (!enable_iommu) +- return; +- + if (capid0_a & VTD_DISABLE) + return; + +- /* Setup BARs: zeroize top 32 bits; set enable bit */ +- mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32); +- mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1); +- mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32); +- mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1); ++ if (enable_iommu) { ++ /* Setup BARs: zeroize top 32 bits; set enable bit */ ++ mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32); ++ mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1); ++ mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32); ++ mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1); ++ } + + /* Set L3HIT2PEND_DIS, lock GFXVTBAR policy config registers */ + u32 reg32; +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0027-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch b/config/coreboot/default/patches/0027-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch deleted file mode 100644 index bd6f6218..00000000 --- a/config/coreboot/default/patches/0027-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch +++ /dev/null @@ -1,440 +0,0 @@ -From 80af5303da07197a7da5262e82a59b691ffed5a2 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Thu, 26 Oct 2017 21:26:43 +0800 -Subject: [PATCH 27/65] mb/dell: Add Latitude E6230 (Ivy Bridge) - -This was adapted from CB:22693 from Iru Cai, which was based on -autoport. I do not physically have this system. Someone with physical -access to an E6230 running version A11 of the vendor firmware sent me -the VBT after running the command `intelvbttool --inlegacy --outvbt -data.vbt`. This new version of the port has not yet been tested. - -The EC is the SMSC MEC5055, which seems to be compatible with the -existing MEC5035 code. As with the other Dell systems with this EC, this -board is assumed to be internally flashable using an EC command that -tells it to pull the FDO pin low on the next boot, which also tells the -vendor firmware to disable all write protections to the flash [1]. - -[1] https://gitlab.com/nic3-14159/dell-flash-unlock - -Original-Change-Id: I8cdc01e902e670310628809416290045c2102340 -Change-Id: I32927beea7c29b96a851ab77ed15b0160f16d369 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/snb_ivb_latitude/Kconfig | 11 +- - .../dell/snb_ivb_latitude/Kconfig.name | 3 + - .../snb_ivb_latitude/variants/e6230/data.vbt | Bin 0 -> 4280 bytes - .../variants/e6230/early_init.c | 12 ++ - .../snb_ivb_latitude/variants/e6230/gpio.c | 193 ++++++++++++++++++ - .../variants/e6230/hda_verb.c | 32 +++ - .../variants/e6230/overridetree.cb | 40 ++++ - 7 files changed, 290 insertions(+), 1 deletion(-) - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb - -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig -index 49bf225fe2..f6e097930b 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig -@@ -56,6 +56,12 @@ config BOARD_DELL_LATITUDE_E5530 - select BOARD_ROMSIZE_KB_12288 - select SOUTHBRIDGE_INTEL_C216 - -+config BOARD_DELL_LATITUDE_E6230 -+ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON -+ select BOARD_ROMSIZE_KB_12288 -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select SOUTHBRIDGE_INTEL_C216 -+ - config BOARD_DELL_LATITUDE_E6330 - select BOARD_DELL_SNB_IVB_LATITUDE_COMMON - select BOARD_ROMSIZE_KB_12288 -@@ -90,6 +96,7 @@ config MAINBOARD_PART_NUMBER - default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 - default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 - default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 -+ default "Latitude E6230" if BOARD_DELL_LATITUDE_E6230 - default "Latitude E6330" if BOARD_DELL_LATITUDE_E6330 - default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430 - default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530 -@@ -108,6 +115,7 @@ config VARIANT_DIR - default "e6420" if BOARD_DELL_LATITUDE_E6420 - default "e6520" if BOARD_DELL_LATITUDE_E6520 - default "e5530" if BOARD_DELL_LATITUDE_E5530 -+ default "e6230" if BOARD_DELL_LATITUDE_E6230 - default "e6330" if BOARD_DELL_LATITUDE_E6330 - default "e6430" if BOARD_DELL_LATITUDE_E6430 - default "e6530" if BOARD_DELL_LATITUDE_E6530 -@@ -121,7 +129,8 @@ config VGA_BIOS_ID - || BOARD_DELL_LATITUDE_E5520 \ - || BOARD_DELL_LATITUDE_E6220 \ - || BOARD_DELL_LATITUDE_E6320 -- default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ -+ default "8086,0166" if BOARD_DELL_LATITUDE_E6230 \ -+ || BOARD_DELL_LATITUDE_E6430 \ - || BOARD_DELL_LATITUDE_E6530 - - endif -diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -index d6fc8eb224..cb7bbd5cdb 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name -@@ -21,6 +21,9 @@ config BOARD_DELL_LATITUDE_E6520 - config BOARD_DELL_LATITUDE_E5530 - bool "Latitude E5530" - -+config BOARD_DELL_LATITUDE_E6230 -+ bool "Latitude E6230" -+ - config BOARD_DELL_LATITUDE_E6330 - bool "Latitude E6330" - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..45ce8f435eea647a0bddaab3fd1e9282c87afc66 -GIT binary patch -literal 4280 -zcmdT{Yiu0V75-*tAG5PFyX&zDekA7P<*tbx&o1`j23L%CmvkLWvN7(mLa6alZ?J`9 -zo3#m4YVlG`2;w12Ajppt~|mMp8L%`XU@4ZyCa_(r`z|Z`bP4p-rEkOMn-R;Ntk#o`b)0sOKRl6 -z?T0eMZS*@LZWP#hD{> -zSLslxYH@j~%H#VLx+<8~!;a@$n+>Q%xHrQ8KGI21_iL4sI -zF*$}m$R7Mr9z@Z*ir@Q9eClsSmC+t(g`q~VQ&nIxZenav_^Buc78s8*o@e|t}g -z1Z-O>lG`>pEuvmL-HpmgSANo!2hWQq2B>Zua$8%tfvQ>!1n@=m9ri_4`H|Rx#SH9n -zDdRF_-FDP&WjW`L$GK%a6x?yO8l2!^g0HJrtA7TknNzCO?|U!wCv2^-5pJ%LW6!+P -z)anX%E>`gP%3Er4c6+J9x=Atk1{Abrr1|WSY3P`SO5j!R5F*vbbQ%AaSHnR_+x&Op -zA%8C-Pk=-Hs+FL90B)E*y3FUTIA1J)&pxRF$tzAkNr7a6_-8v$@j~G~3keqYd5I;y8g^P< -zfWO_D2@EyVVBxnpv*}hgTeeRzWz9BoISh>M%^k`WXG=5ti$_Wu99)~lWE-qubeXNk -zla9Tu=Jhyn5T<3$H#?Hfm-`+(d$7IBDx9cEvNv1i-LEDr>r7438bfkPcKod+mwd22 -z%{^(w&NuG)MKl0fTMTXZFJEm~k;KCj*D60g=j!2jsP){tzvOjAJ2nB}At~#%f4?FGT+d8LFnXXtYN&Mm06B -z(JwUPX-z$$(d(M=uBLvh@h6#K=;~&jQo1p&t3TCgSvQ{3)l)jXr5hjW>fd!z!bW>o -z-4UjJVdJi_dN@o^hK(1(>dRqzCv2PztLMTLjTqY^YEMMJ{=B#1IV)9~IMg|yl(NPF -zQSfMX`?(b5)))B!zjy0B$ua20CCLTPl^IS&2=T&Zid9-1*K{VAJP?rxjYC+zGDCe* -ziQI7VfF17@3`3W-qCN>lPC5CL_c?p0FTGXaGB3i~{ZE -zr=QtIprytDnU7C*Wj%x0k)O{Y%nUnl%}K%F|J_iVaD&ubW4Qbtx;pZEb9}f^Yd;Ea -zI1Ha{7Yt~z{LAY++1QG{F6*_4WsUziY{x?%I9B}i5-Tphhk8FGm%Jf!3d-ysG_9>uk%#)4xpxb+ZkJdel#+h}l9j9`1 -zt*M!5u?i4YtZ+WECo6$LJF06|G-mMZskGiV*lQJf-ItB+hltIsId@e& -z-cNvr(fgI)K*zkikg6TDJi?^}ghc*U*%A%EGg -Y$$8Z}9a~<{Q@y10T!W`-d%n2+Kj)*Kg#Z8m - -literal 0 -HcmV?d00001 - -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c -new file mode 100644 -index 0000000000..24c1b32467 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c -@@ -0,0 +1,12 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include -+ -+void bootblock_mainboard_early_init(void) -+{ -+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN); -+ mec5035_early_init(); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c -new file mode 100644 -index 0000000000..c07e4b1c56 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c -@@ -0,0 +1,193 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_GPIO, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_GPIO, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_NATIVE, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio1 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio3 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_INPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_OUTPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_OUTPUT, -+ .gpio29 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio17 = GPIO_LEVEL_HIGH, -+ .gpio28 = GPIO_LEVEL_LOW, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+ .gpio30 = GPIO_RESET_RSMRST, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+ .gpio13 = GPIO_INVERT, -+ .gpio14 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_GPIO, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_GPIO, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+ .gpio61 = GPIO_MODE_NATIVE, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_OUTPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio45 = GPIO_DIR_OUTPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_INPUT, -+ .gpio51 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_OUTPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+ .gpio34 = GPIO_LEVEL_HIGH, -+ .gpio45 = GPIO_LEVEL_LOW, -+ .gpio60 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_NATIVE, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c -new file mode 100644 -index 0000000000..f6876f9e09 ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c -@@ -0,0 +1,32 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x111d76df, /* Codec Vendor / Device ID: IDT */ -+ 0x10280532, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x10280532), -+ AZALIA_PIN_CFG(0, 0x0a, 0x03a11020), -+ AZALIA_PIN_CFG(0, 0x0b, 0x0321101f), -+ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), -+ AZALIA_PIN_CFG(0, 0x11, 0xd5a30130), -+ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), -+ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), -+ -+ 0x80862806, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x18560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x18560030), -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb -new file mode 100644 -index 0000000000..3a0fa720da ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb -@@ -0,0 +1,40 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/sandybridge -+ device domain 0 on -+ subsystemid 0x1028 0x0532 inherit -+ -+ device ref igd on -+ register "gpu_cpu_backlight" = "0x000009e9" -+ register "gpu_pch_backlight" = "0x13121312" -+ end -+ -+ chip southbridge/intel/bd82x6x -+ register "usb_port_config" = "{ -+ { 1, 1, 0 }, -+ { 1, 1, 0 }, -+ { 1, 0, 1 }, -+ { 1, 2, 1 }, -+ { 1, 0, 2 }, -+ { 1, 0, 2 }, -+ { 1, 0, 3 }, -+ { 1, 1, 3 }, -+ { 1, 2, 4 }, -+ { 1, 1, 4 }, -+ { 1, 1, 5 }, -+ { 1, 1, 5 }, -+ { 1, 2, 6 }, -+ { 1, 0, 6 }, -+ }" -+ -+ device ref xhci on -+ register "superspeed_capable_ports" = "0x0000000f" -+ register "xhci_overcurrent_mapping" = "0x00000c03" -+ register "xhci_switchable_ports" = "0x0000000f" -+ end -+ device ref sata1 on -+ register "sata_port_map" = "0x31" -+ end -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0027-nb-intel-gm45-Make-DDR2-raminit-work.patch b/config/coreboot/default/patches/0027-nb-intel-gm45-Make-DDR2-raminit-work.patch new file mode 100644 index 00000000..28fc679f --- /dev/null +++ b/config/coreboot/default/patches/0027-nb-intel-gm45-Make-DDR2-raminit-work.patch @@ -0,0 +1,223 @@ +From c6181fe0c8b58cb5a4523d5763fc5fcdf61b3f10 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Mon, 10 May 2021 22:40:59 +0200 +Subject: [PATCH 27/51] nb/intel/gm45: Make DDR2 raminit work + +List of changes: + - Update some timing and ODT values + - Patch RCOMP calibration to better match what MRC binaries do + - Replay a hardcoded list of RCOMP codes after RcvEn + +This makes raminit work at DDR2-800 speeds and fixes S3 resume as well. +Tested on Toshiba Satellite A300-1ME with two 2 GiB DDR2-800 SO-DIMMs. + +Change-Id: Ibaee524b8ff652ddadd66cb0eb680401b988ff7c +Signed-off-by: Angel Pons +--- + src/northbridge/intel/gm45/gm45.h | 2 +- + src/northbridge/intel/gm45/raminit.c | 90 +++++++++++++++++-- + .../intel/gm45/raminit_rcomp_calibration.c | 27 ++++-- + 3 files changed, 106 insertions(+), 13 deletions(-) + +diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h +index 5d9ac56606..338260ea7a 100644 +--- a/src/northbridge/intel/gm45/gm45.h ++++ b/src/northbridge/intel/gm45/gm45.h +@@ -420,7 +420,7 @@ void igd_compute_ggc(sysinfo_t *const sysinfo); + int raminit_read_vco_index(void); + u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank); + +-void raminit_rcomp_calibration(stepping_t stepping); ++void raminit_rcomp_calibration(int ddr_type, stepping_t stepping); + void raminit_reset_readwrite_pointers(void); + void raminit_receive_enable_calibration(int ddr_type, const timings_t *, const dimminfo_t *); + void raminit_write_training(const mem_clock_t, const dimminfo_t *, int s3resume); +diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c +index b7e013959a..df8f46fbbc 100644 +--- a/src/northbridge/intel/gm45/raminit.c ++++ b/src/northbridge/intel/gm45/raminit.c +@@ -1047,7 +1047,7 @@ static void rcomp_initialization(const int spd_type, const stepping_t stepping, + } + + /* Perform RCOMP calibration for DDR3. */ +- raminit_rcomp_calibration(stepping); ++ raminit_rcomp_calibration(spd_type, stepping); + + /* Run initial RCOMP. */ + mchbar_setbits32(0x418, 1 << 17); +@@ -1117,7 +1117,7 @@ static void dram_program_timings(const int spd_type, const timings_t *const timi + reg = (reg & ~(0xf << 10)) | (2 << 10); + else + reg = (reg & ~(0xf << 10)) | (3 << 10); +- reg = (reg & ~(0x7 << 5)) | (3 << 5); ++ reg = (reg & ~(0x7 << 5)) | (2 << 5); + } else if (timings->mem_clock != MEM_CLOCK_1067MT) { + reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15); + reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10); +@@ -1286,11 +1286,11 @@ static void ddr2_odt_setup(const timings_t *const timings, const int sff) + reg = (reg & ~(0xf << (44 - 32))) | (8 << (44 - 32)); + reg = (reg & ~(0xf << (40 - 32))) | (7 << (40 - 32)); + if (timings->mem_clock == MEM_CLOCK_667MT) { +- reg = (reg & ~(0xf << (36 - 32))) | (4 << (36 - 32)); +- reg = (reg & ~(0xf << (32 - 32))) | (4 << (32 - 32)); ++ reg = (reg & ~(0xf << (36 - 32))) | (8 << (36 - 32)); ++ reg = (reg & ~(0xf << (32 - 32))) | (8 << (32 - 32)); + } else { +- reg = (reg & ~(0xf << (36 - 32))) | (5 << (36 - 32)); +- reg = (reg & ~(0xf << (32 - 32))) | (5 << (32 - 32)); ++ reg = (reg & ~(0xf << (36 - 32))) | (9 << (36 - 32)); ++ reg = (reg & ~(0xf << (32 - 32))) | (9 << (32 - 32)); + } + mchbar_write32(CxODT_HIGH(ch), reg); + +@@ -2209,6 +2209,84 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume) + raminit_write_training(timings->mem_clock, dimms, s3resume); + } + ++ /* ++ * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done ++ * after receiver enable calibration, otherwise raminit sometimes ++ * completes with non-working memory. ++ */ ++ mchbar_write32(0x0530, 0x06060005); ++ mchbar_write32(0x0680, 0x06060606); ++ mchbar_write32(0x0684, 0x08070606); ++ mchbar_write32(0x0688, 0x0e0e0c0a); ++ mchbar_write32(0x068c, 0x0e0e0e0e); ++ mchbar_write32(0x0698, 0x06060606); ++ mchbar_write32(0x069c, 0x08070606); ++ mchbar_write32(0x06a0, 0x0c0c0b0a); ++ mchbar_write32(0x06a4, 0x0c0c0c0c); ++ ++ mchbar_write32(0x06c0, 0x02020202); ++ mchbar_write32(0x06c4, 0x03020202); ++ mchbar_write32(0x06c8, 0x04040403); ++ mchbar_write32(0x06cc, 0x04040404); ++ mchbar_write32(0x06d8, 0x02020202); ++ mchbar_write32(0x06dc, 0x03020202); ++ mchbar_write32(0x06e0, 0x04040403); ++ mchbar_write32(0x06e4, 0x04040404); ++ ++ mchbar_write32(0x0700, 0x02020202); ++ mchbar_write32(0x0704, 0x03020202); ++ mchbar_write32(0x0708, 0x04040403); ++ mchbar_write32(0x070c, 0x04040404); ++ mchbar_write32(0x0718, 0x02020202); ++ mchbar_write32(0x071c, 0x03020202); ++ mchbar_write32(0x0720, 0x04040403); ++ mchbar_write32(0x0724, 0x04040404); ++ ++ mchbar_write32(0x0740, 0x02020202); ++ mchbar_write32(0x0744, 0x03020202); ++ mchbar_write32(0x0748, 0x04040403); ++ mchbar_write32(0x074c, 0x04040404); ++ mchbar_write32(0x0758, 0x02020202); ++ mchbar_write32(0x075c, 0x03020202); ++ mchbar_write32(0x0760, 0x04040403); ++ mchbar_write32(0x0764, 0x04040404); ++ ++ mchbar_write32(0x0780, 0x06060606); ++ mchbar_write32(0x0784, 0x09070606); ++ mchbar_write32(0x0788, 0x0e0e0c0b); ++ mchbar_write32(0x078c, 0x0e0e0e0e); ++ mchbar_write32(0x0798, 0x06060606); ++ mchbar_write32(0x079c, 0x09070606); ++ mchbar_write32(0x07a0, 0x0d0d0c0b); ++ mchbar_write32(0x07a4, 0x0d0d0d0d); ++ ++ mchbar_write32(0x07c0, 0x06060606); ++ mchbar_write32(0x07c4, 0x09070606); ++ mchbar_write32(0x07c8, 0x0e0e0c0b); ++ mchbar_write32(0x07cc, 0x0e0e0e0e); ++ mchbar_write32(0x07d8, 0x06060606); ++ mchbar_write32(0x07dc, 0x09070606); ++ mchbar_write32(0x07e0, 0x0d0d0c0b); ++ mchbar_write32(0x07e4, 0x0d0d0d0d); ++ ++ mchbar_write32(0x0840, 0x06060606); ++ mchbar_write32(0x0844, 0x08070606); ++ mchbar_write32(0x0848, 0x0e0e0c0a); ++ mchbar_write32(0x084c, 0x0e0e0e0e); ++ mchbar_write32(0x0858, 0x06060606); ++ mchbar_write32(0x085c, 0x08070606); ++ mchbar_write32(0x0860, 0x0c0c0b0a); ++ mchbar_write32(0x0864, 0x0c0c0c0c); ++ ++ mchbar_write32(0x0880, 0x02020202); ++ mchbar_write32(0x0884, 0x03020202); ++ mchbar_write32(0x0888, 0x04040403); ++ mchbar_write32(0x088c, 0x04040404); ++ mchbar_write32(0x0898, 0x02020202); ++ mchbar_write32(0x089c, 0x03020202); ++ mchbar_write32(0x08a0, 0x04040403); ++ mchbar_write32(0x08a4, 0x04040404); ++ + igd_compute_ggc(sysinfo); + + /* Program final memory map (with real values). */ +diff --git a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c +index aef863f05a..b74765fd9c 100644 +--- a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c ++++ b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c +@@ -161,11 +161,13 @@ static void lookup_and_write(const int a1step, + mchbar += 4; + } + } +-void raminit_rcomp_calibration(const stepping_t stepping) { ++void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) { + const int a1step = stepping >= STEPPING_CONVERSION_A1; + + int i; + ++ char magic_comp[2] = {0}; ++ + enum { + PULL_UP = 0, + PULL_DOWN = 1, +@@ -196,6 +198,10 @@ void raminit_rcomp_calibration(const stepping_t stepping) { + reg = mchbar_read32(0x518); + lut_idx[channel][group][PULL_UP] = (reg >> 24) & 0x7f; + lut_idx[channel][group][PULL_DOWN] = (reg >> 16) & 0x7f; ++ if (i == 1) { ++ magic_comp[0] = (reg >> 8) & 0x3f; ++ magic_comp[1] = (reg >> 0) & 0x3f; ++ } + } + /* Cleanup? */ + mchbar_setbits32(0x400, 1 << 3); +@@ -216,13 +222,19 @@ void raminit_rcomp_calibration(const stepping_t stepping) { + for (channel = 0; channel < 2; ++channel) { + for (group = 0; group < 6; ++group) { + for (pu_pd = PULL_DOWN; pu_pd >= PULL_UP; --pu_pd) { +- lookup_and_write( +- a1step, +- lut_idx[channel][group][pu_pd] - 7, +- ddr3_lookup_schedule[group][pu_pd], +- mchbar); ++ if (ddr_type == DDR3) { ++ lookup_and_write( ++ a1step, ++ lut_idx[channel][group][pu_pd] - 7, ++ ddr3_lookup_schedule[group][pu_pd], ++ mchbar); ++ } + mchbar += 0x0018; + } ++ if (ddr_type == DDR2) { ++ mchbar_clrsetbits32(mchbar + 0, 0x7f << 24, lut_idx[channel][group][PULL_DOWN] << 24); ++ mchbar_clrsetbits32(mchbar + 4, 0x7f << 0, lut_idx[channel][group][PULL_UP] << 0); ++ } + mchbar += 0x0010; + /* Channel B knows only the first two groups. */ + if ((1 == channel) && (1 == group)) +@@ -230,4 +242,7 @@ void raminit_rcomp_calibration(const stepping_t stepping) { + } + mchbar += 0x0040; + } ++ ++ mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26); ++ mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20); + } +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0028-HACK-Disable-coreboot-related-BL31-features.patch b/config/coreboot/default/patches/0028-HACK-Disable-coreboot-related-BL31-features.patch deleted file mode 100644 index e6ad26d1..00000000 --- a/config/coreboot/default/patches/0028-HACK-Disable-coreboot-related-BL31-features.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 8fa72bedc6282ba581ede85d62a341917ec5d203 Mon Sep 17 00:00:00 2001 -From: Alper Nebi Yasak -Date: Thu, 22 Jun 2023 16:44:27 +0300 -Subject: [PATCH 28/65] HACK: Disable coreboot related BL31 features - -I don't know why, but removing this BL31 make argument lets gru-kevin -power off properly when shut down from Linux. Needs investigation. ---- - src/arch/arm64/Makefile.mk | 3 --- - 1 file changed, 3 deletions(-) - -diff --git a/src/arch/arm64/Makefile.mk b/src/arch/arm64/Makefile.mk -index cb43897efd..a9e5ff399a 100644 ---- a/src/arch/arm64/Makefile.mk -+++ b/src/arch/arm64/Makefile.mk -@@ -173,9 +173,6 @@ BL31_MAKEARGS += LOG_LEVEL=40 - # Always enable crash reporting, even on a release build - BL31_MAKEARGS += CRASH_REPORTING=1 - --# Enable coreboot-specific features like CBMEM console support --BL31_MAKEARGS += COREBOOT=1 -- - # Avoid build/release|build/debug distinction by overriding BUILD_PLAT directly - BL31_MAKEARGS += BUILD_PLAT="$(BL31_BUILD)" - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0028-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch b/config/coreboot/default/patches/0028-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch new file mode 100644 index 00000000..92e59129 --- /dev/null +++ b/config/coreboot/default/patches/0028-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch @@ -0,0 +1,240 @@ +From b6f75374fa38e0b097c9eadb4916112707cb6747 Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Tue, 6 Aug 2024 00:50:24 +0100 +Subject: [PATCH 28/51] nb/gm45: Fix Angel's DDR2 RCOMP fix on DDR3 boards + +We add this patch: + +commit commit_id_here +Author: Angel Pons +Date: Mon May 10 22:40:59 2021 +0200 + + nb/intel/gm45: Make DDR2 raminit work + +This patch was original applied, in lbmk, only on coreboot/dell, +separately from coreboot/default, which was wasteful because it +meant having an entire coreboot tree just for a single board. We +did this, because the DDR2 RCOMP fix happened to break DDR3 init +on other boards. + +What *this* new patch does on top of Angel's patch, is make sure +that their changes only apply to DDR2, while DDR3 behaviour remains +unchanged. This means that the Dell Latitude E6400 can be supported +in the main coreboot tree, within lbmk. + +Essentially, this patch restores the old behaviour, prior to applying +Angel's patch, only when DDR3 memory is used. + +Signed-off-by: Leah Rowe +--- + src/northbridge/intel/gm45/raminit.c | 161 +++++++++--------- + .../intel/gm45/raminit_rcomp_calibration.c | 9 +- + 2 files changed, 88 insertions(+), 82 deletions(-) + +diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c +index df8f46fbbc..433db3a68c 100644 +--- a/src/northbridge/intel/gm45/raminit.c ++++ b/src/northbridge/intel/gm45/raminit.c +@@ -1117,7 +1117,10 @@ static void dram_program_timings(const int spd_type, const timings_t *const timi + reg = (reg & ~(0xf << 10)) | (2 << 10); + else + reg = (reg & ~(0xf << 10)) | (3 << 10); +- reg = (reg & ~(0x7 << 5)) | (2 << 5); ++ if (spd_type == DDR2) ++ reg = (reg & ~(0x7 << 5)) | (2 << 5); ++ else ++ reg = (reg & ~(0x7 << 5)) | (3 << 5); + } else if (timings->mem_clock != MEM_CLOCK_1067MT) { + reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15); + reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10); +@@ -2209,83 +2212,85 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume) + raminit_write_training(timings->mem_clock, dimms, s3resume); + } + +- /* +- * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done +- * after receiver enable calibration, otherwise raminit sometimes +- * completes with non-working memory. +- */ +- mchbar_write32(0x0530, 0x06060005); +- mchbar_write32(0x0680, 0x06060606); +- mchbar_write32(0x0684, 0x08070606); +- mchbar_write32(0x0688, 0x0e0e0c0a); +- mchbar_write32(0x068c, 0x0e0e0e0e); +- mchbar_write32(0x0698, 0x06060606); +- mchbar_write32(0x069c, 0x08070606); +- mchbar_write32(0x06a0, 0x0c0c0b0a); +- mchbar_write32(0x06a4, 0x0c0c0c0c); +- +- mchbar_write32(0x06c0, 0x02020202); +- mchbar_write32(0x06c4, 0x03020202); +- mchbar_write32(0x06c8, 0x04040403); +- mchbar_write32(0x06cc, 0x04040404); +- mchbar_write32(0x06d8, 0x02020202); +- mchbar_write32(0x06dc, 0x03020202); +- mchbar_write32(0x06e0, 0x04040403); +- mchbar_write32(0x06e4, 0x04040404); +- +- mchbar_write32(0x0700, 0x02020202); +- mchbar_write32(0x0704, 0x03020202); +- mchbar_write32(0x0708, 0x04040403); +- mchbar_write32(0x070c, 0x04040404); +- mchbar_write32(0x0718, 0x02020202); +- mchbar_write32(0x071c, 0x03020202); +- mchbar_write32(0x0720, 0x04040403); +- mchbar_write32(0x0724, 0x04040404); +- +- mchbar_write32(0x0740, 0x02020202); +- mchbar_write32(0x0744, 0x03020202); +- mchbar_write32(0x0748, 0x04040403); +- mchbar_write32(0x074c, 0x04040404); +- mchbar_write32(0x0758, 0x02020202); +- mchbar_write32(0x075c, 0x03020202); +- mchbar_write32(0x0760, 0x04040403); +- mchbar_write32(0x0764, 0x04040404); +- +- mchbar_write32(0x0780, 0x06060606); +- mchbar_write32(0x0784, 0x09070606); +- mchbar_write32(0x0788, 0x0e0e0c0b); +- mchbar_write32(0x078c, 0x0e0e0e0e); +- mchbar_write32(0x0798, 0x06060606); +- mchbar_write32(0x079c, 0x09070606); +- mchbar_write32(0x07a0, 0x0d0d0c0b); +- mchbar_write32(0x07a4, 0x0d0d0d0d); +- +- mchbar_write32(0x07c0, 0x06060606); +- mchbar_write32(0x07c4, 0x09070606); +- mchbar_write32(0x07c8, 0x0e0e0c0b); +- mchbar_write32(0x07cc, 0x0e0e0e0e); +- mchbar_write32(0x07d8, 0x06060606); +- mchbar_write32(0x07dc, 0x09070606); +- mchbar_write32(0x07e0, 0x0d0d0c0b); +- mchbar_write32(0x07e4, 0x0d0d0d0d); +- +- mchbar_write32(0x0840, 0x06060606); +- mchbar_write32(0x0844, 0x08070606); +- mchbar_write32(0x0848, 0x0e0e0c0a); +- mchbar_write32(0x084c, 0x0e0e0e0e); +- mchbar_write32(0x0858, 0x06060606); +- mchbar_write32(0x085c, 0x08070606); +- mchbar_write32(0x0860, 0x0c0c0b0a); +- mchbar_write32(0x0864, 0x0c0c0c0c); +- +- mchbar_write32(0x0880, 0x02020202); +- mchbar_write32(0x0884, 0x03020202); +- mchbar_write32(0x0888, 0x04040403); +- mchbar_write32(0x088c, 0x04040404); +- mchbar_write32(0x0898, 0x02020202); +- mchbar_write32(0x089c, 0x03020202); +- mchbar_write32(0x08a0, 0x04040403); +- mchbar_write32(0x08a4, 0x04040404); ++ if (sysinfo->spd_type == DDR2) { ++ /* ++ * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done ++ * after receiver enable calibration, otherwise raminit sometimes ++ * completes with non-working memory. ++ */ ++ mchbar_write32(0x0530, 0x06060005); ++ mchbar_write32(0x0680, 0x06060606); ++ mchbar_write32(0x0684, 0x08070606); ++ mchbar_write32(0x0688, 0x0e0e0c0a); ++ mchbar_write32(0x068c, 0x0e0e0e0e); ++ mchbar_write32(0x0698, 0x06060606); ++ mchbar_write32(0x069c, 0x08070606); ++ mchbar_write32(0x06a0, 0x0c0c0b0a); ++ mchbar_write32(0x06a4, 0x0c0c0c0c); ++ ++ mchbar_write32(0x06c0, 0x02020202); ++ mchbar_write32(0x06c4, 0x03020202); ++ mchbar_write32(0x06c8, 0x04040403); ++ mchbar_write32(0x06cc, 0x04040404); ++ mchbar_write32(0x06d8, 0x02020202); ++ mchbar_write32(0x06dc, 0x03020202); ++ mchbar_write32(0x06e0, 0x04040403); ++ mchbar_write32(0x06e4, 0x04040404); ++ ++ mchbar_write32(0x0700, 0x02020202); ++ mchbar_write32(0x0704, 0x03020202); ++ mchbar_write32(0x0708, 0x04040403); ++ mchbar_write32(0x070c, 0x04040404); ++ mchbar_write32(0x0718, 0x02020202); ++ mchbar_write32(0x071c, 0x03020202); ++ mchbar_write32(0x0720, 0x04040403); ++ mchbar_write32(0x0724, 0x04040404); ++ ++ mchbar_write32(0x0740, 0x02020202); ++ mchbar_write32(0x0744, 0x03020202); ++ mchbar_write32(0x0748, 0x04040403); ++ mchbar_write32(0x074c, 0x04040404); ++ mchbar_write32(0x0758, 0x02020202); ++ mchbar_write32(0x075c, 0x03020202); ++ mchbar_write32(0x0760, 0x04040403); ++ mchbar_write32(0x0764, 0x04040404); ++ ++ mchbar_write32(0x0780, 0x06060606); ++ mchbar_write32(0x0784, 0x09070606); ++ mchbar_write32(0x0788, 0x0e0e0c0b); ++ mchbar_write32(0x078c, 0x0e0e0e0e); ++ mchbar_write32(0x0798, 0x06060606); ++ mchbar_write32(0x079c, 0x09070606); ++ mchbar_write32(0x07a0, 0x0d0d0c0b); ++ mchbar_write32(0x07a4, 0x0d0d0d0d); ++ ++ mchbar_write32(0x07c0, 0x06060606); ++ mchbar_write32(0x07c4, 0x09070606); ++ mchbar_write32(0x07c8, 0x0e0e0c0b); ++ mchbar_write32(0x07cc, 0x0e0e0e0e); ++ mchbar_write32(0x07d8, 0x06060606); ++ mchbar_write32(0x07dc, 0x09070606); ++ mchbar_write32(0x07e0, 0x0d0d0c0b); ++ mchbar_write32(0x07e4, 0x0d0d0d0d); ++ ++ mchbar_write32(0x0840, 0x06060606); ++ mchbar_write32(0x0844, 0x08070606); ++ mchbar_write32(0x0848, 0x0e0e0c0a); ++ mchbar_write32(0x084c, 0x0e0e0e0e); ++ mchbar_write32(0x0858, 0x06060606); ++ mchbar_write32(0x085c, 0x08070606); ++ mchbar_write32(0x0860, 0x0c0c0b0a); ++ mchbar_write32(0x0864, 0x0c0c0c0c); ++ ++ mchbar_write32(0x0880, 0x02020202); ++ mchbar_write32(0x0884, 0x03020202); ++ mchbar_write32(0x0888, 0x04040403); ++ mchbar_write32(0x088c, 0x04040404); ++ mchbar_write32(0x0898, 0x02020202); ++ mchbar_write32(0x089c, 0x03020202); ++ mchbar_write32(0x08a0, 0x04040403); ++ mchbar_write32(0x08a4, 0x04040404); ++ } + + igd_compute_ggc(sysinfo); + +diff --git a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c +index b74765fd9c..5d4505e063 100644 +--- a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c ++++ b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c +@@ -198,7 +198,7 @@ void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) { + reg = mchbar_read32(0x518); + lut_idx[channel][group][PULL_UP] = (reg >> 24) & 0x7f; + lut_idx[channel][group][PULL_DOWN] = (reg >> 16) & 0x7f; +- if (i == 1) { ++ if ((i == 1) && (ddr_type == DDR2)) { + magic_comp[0] = (reg >> 8) & 0x3f; + magic_comp[1] = (reg >> 0) & 0x3f; + } +@@ -242,7 +242,8 @@ void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) { + } + mchbar += 0x0040; + } +- +- mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26); +- mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20); ++ if (ddr_type == DDR2) { ++ mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26); ++ mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20); ++ } + } +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0029-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch b/config/coreboot/default/patches/0029-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch new file mode 100644 index 00000000..e31cb64c --- /dev/null +++ b/config/coreboot/default/patches/0029-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch @@ -0,0 +1,52 @@ +From d3045b3dcebd94b78df2129cd81a20adf215e46a Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Mon, 20 May 2024 10:24:16 -0600 +Subject: [PATCH 29/51] mb/dell/e6400: Use 100 MHz reference clock for display + +The E6400 uses a 100 MHz reference clock for spread spectrum support on +LVDS, whereas libgfxinit previously assumed a 96 MHz input clock. For +the more common 1280 x 800 display panels, the numerical error was not +large enough to cause noticable issues, but the actual pixel clock +frequency derived from a 100 MHz reference using PLL configs calculated +assuming a 96 MHz reference was not close enough for 1440 x 900 panels, +which require a much higher pixel clock. This resulted in a garbled +display in the pre-OS graphics environment provided by libgfxinit. + +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/e6400/Kconfig | 3 +++ + src/northbridge/intel/gm45/Kconfig | 4 ++++ + 2 files changed, 7 insertions(+) + +diff --git a/src/mainboard/dell/e6400/Kconfig b/src/mainboard/dell/e6400/Kconfig +index 417d95fd5d..6fe1b1c456 100644 +--- a/src/mainboard/dell/e6400/Kconfig ++++ b/src/mainboard/dell/e6400/Kconfig +@@ -19,6 +19,9 @@ config BOARD_SPECIFIC_OPTIONS + select INTEL_GMA_HAVE_VBT + select EC_DELL_MEC5035 + ++config INTEL_GMA_DPLL_REF_FREQ ++ default 100000000 ++ + config MAINBOARD_DIR + default "dell/e6400" + +diff --git a/src/northbridge/intel/gm45/Kconfig b/src/northbridge/intel/gm45/Kconfig +index 8059e7ee80..5df5a93296 100644 +--- a/src/northbridge/intel/gm45/Kconfig ++++ b/src/northbridge/intel/gm45/Kconfig +@@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_GM45 + + if NORTHBRIDGE_INTEL_GM45 + ++config INTEL_GMA_DPLL_REF_FREQ ++ int ++ default 96000000 ++ + config VBOOT + select VBOOT_STARTS_IN_BOOTBLOCK + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0029-use-own-mirror-for-acpica-files.patch b/config/coreboot/default/patches/0029-use-own-mirror-for-acpica-files.patch deleted file mode 100644 index 97d7def5..00000000 --- a/config/coreboot/default/patches/0029-use-own-mirror-for-acpica-files.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 5b425149a2ba0d1c044c32f5e16ba4d4e59796a8 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Wed, 31 Jul 2024 00:03:02 +0100 -Subject: [PATCH 29/65] use own mirror for acpica files - -intel likes to break links for no reason, -so we host our own backups of acpica. - -Signed-off-by: Leah Rowe ---- - util/crossgcc/buildgcc | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc -index ad756652ed..5faff337b4 100755 ---- a/util/crossgcc/buildgcc -+++ b/util/crossgcc/buildgcc -@@ -74,7 +74,7 @@ MPFR_BASE_URL="https://ftpmirror.gnu.org/mpfr" - MPC_BASE_URL="https://ftpmirror.gnu.org/mpc" - GCC_BASE_URL="https://ftpmirror.gnu.org/gcc/gcc-${GCC_VERSION}" - BINUTILS_BASE_URL="https://ftpmirror.gnu.org/binutils" --IASL_BASE_URL="https://downloadmirror.intel.com/783534" -+IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica" - # CLANG toolchain archive locations - LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}" - CLANG_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}" --- -2.39.5 - diff --git a/config/coreboot/default/patches/0030-crank-up-vram-allocation-on-more-intel-boards.patch b/config/coreboot/default/patches/0030-crank-up-vram-allocation-on-more-intel-boards.patch deleted file mode 100644 index fbf7962d..00000000 --- a/config/coreboot/default/patches/0030-crank-up-vram-allocation-on-more-intel-boards.patch +++ /dev/null @@ -1,142 +0,0 @@ -From 253f8eeb895e50b3394b58268594acf9e9596bd2 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Tue, 31 Oct 2023 18:24:39 +0000 -Subject: [PATCH 30/65] crank up vram allocation on more intel boards - -these were added to libreboot, and it's a policy of -libreboot to max out the vram settings. this was -overlooked, in prior revisions and releases. - -Signed-off-by: Leah Rowe ---- - src/mainboard/dell/e6400/cmos.default | 2 +- - src/mainboard/dell/snb_ivb_workstations/cmos.default | 2 +- - src/mainboard/hp/compaq_8200_elite_sff/cmos.default | 2 +- - src/mainboard/hp/compaq_elite_8300_usdt/cmos.default | 2 +- - src/mainboard/hp/snb_ivb_laptops/cmos.default | 1 + - src/mainboard/lenovo/t420/cmos.default | 1 + - src/mainboard/lenovo/t420s/cmos.default | 1 + - src/mainboard/lenovo/t430/cmos.default | 1 + - src/mainboard/lenovo/t520/cmos.default | 1 + - src/mainboard/lenovo/t530/cmos.default | 1 + - src/mainboard/lenovo/x201/cmos.default | 1 + - src/mainboard/lenovo/x220/cmos.default | 1 + - 12 files changed, 12 insertions(+), 4 deletions(-) - -diff --git a/src/mainboard/dell/e6400/cmos.default b/src/mainboard/dell/e6400/cmos.default -index 744a599708..6b8d478f06 100644 ---- a/src/mainboard/dell/e6400/cmos.default -+++ b/src/mainboard/dell/e6400/cmos.default -@@ -4,4 +4,4 @@ boot_option=Fallback - debug_level=Debug - power_on_after_fail=Disable - sata_mode=AHCI --gfx_uma_size=32M -+gfx_uma_size=256M -diff --git a/src/mainboard/dell/snb_ivb_workstations/cmos.default b/src/mainboard/dell/snb_ivb_workstations/cmos.default -index 76c16e6a8d..19364aae6e 100644 ---- a/src/mainboard/dell/snb_ivb_workstations/cmos.default -+++ b/src/mainboard/dell/snb_ivb_workstations/cmos.default -@@ -5,5 +5,5 @@ debug_level=Debug - power_on_after_fail=Disable - nmi=Enable - sata_mode=AHCI --gfx_uma_size=128M -+gfx_uma_size=224M - fan_full_speed=Disable -diff --git a/src/mainboard/hp/compaq_8200_elite_sff/cmos.default b/src/mainboard/hp/compaq_8200_elite_sff/cmos.default -index 497ae92e1f..64d43a07f7 100644 ---- a/src/mainboard/hp/compaq_8200_elite_sff/cmos.default -+++ b/src/mainboard/hp/compaq_8200_elite_sff/cmos.default -@@ -5,5 +5,5 @@ debug_level=Debug - power_on_after_fail=Enable - nmi=Enable - sata_mode=AHCI --gfx_uma_size=32M -+gfx_uma_size=224M - psu_fan_lvl=3 -diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default -index f3dad88670..b60f28447b 100644 ---- a/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default -+++ b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default -@@ -5,4 +5,4 @@ debug_level=Debug - power_on_after_fail=Enable - nmi=Enable - sata_mode=AHCI --gfx_uma_size=32M -+gfx_uma_size=224M -diff --git a/src/mainboard/hp/snb_ivb_laptops/cmos.default b/src/mainboard/hp/snb_ivb_laptops/cmos.default -index e6042c0c27..a04026b70c 100644 ---- a/src/mainboard/hp/snb_ivb_laptops/cmos.default -+++ b/src/mainboard/hp/snb_ivb_laptops/cmos.default -@@ -5,3 +5,4 @@ debug_level=Debug - power_on_after_fail=Disable - nmi=Enable - sata_mode=AHCI -+gfx_uma_size=224M -diff --git a/src/mainboard/lenovo/t420/cmos.default b/src/mainboard/lenovo/t420/cmos.default -index 27a62d07b3..d1c9fcaaaf 100644 ---- a/src/mainboard/lenovo/t420/cmos.default -+++ b/src/mainboard/lenovo/t420/cmos.default -@@ -17,3 +17,4 @@ trackpoint=Enable - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable - me_state=Disabled -+gfx_uma_size=224M -diff --git a/src/mainboard/lenovo/t420s/cmos.default b/src/mainboard/lenovo/t420s/cmos.default -index 27a62d07b3..d1c9fcaaaf 100644 ---- a/src/mainboard/lenovo/t420s/cmos.default -+++ b/src/mainboard/lenovo/t420s/cmos.default -@@ -17,3 +17,4 @@ trackpoint=Enable - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable - me_state=Disabled -+gfx_uma_size=224M -diff --git a/src/mainboard/lenovo/t430/cmos.default b/src/mainboard/lenovo/t430/cmos.default -index 6d1e172056..c00b358314 100644 ---- a/src/mainboard/lenovo/t430/cmos.default -+++ b/src/mainboard/lenovo/t430/cmos.default -@@ -18,3 +18,4 @@ backlight=Both - usb_always_on=Disable - hybrid_graphics_mode=Integrated Only - me_state=Disabled -+gfx_uma_size=224M -diff --git a/src/mainboard/lenovo/t520/cmos.default b/src/mainboard/lenovo/t520/cmos.default -index ab1be1a678..c7ee9564f3 100644 ---- a/src/mainboard/lenovo/t520/cmos.default -+++ b/src/mainboard/lenovo/t520/cmos.default -@@ -18,3 +18,4 @@ backlight=Both - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable - me_state=Disabled -+gfx_uma_size=224M -diff --git a/src/mainboard/lenovo/t530/cmos.default b/src/mainboard/lenovo/t530/cmos.default -index ab1be1a678..c7ee9564f3 100644 ---- a/src/mainboard/lenovo/t530/cmos.default -+++ b/src/mainboard/lenovo/t530/cmos.default -@@ -18,3 +18,4 @@ backlight=Both - hybrid_graphics_mode=Integrated Only - usb_always_on=Disable - me_state=Disabled -+gfx_uma_size=224M -diff --git a/src/mainboard/lenovo/x201/cmos.default b/src/mainboard/lenovo/x201/cmos.default -index 94f8e08a75..a1f2eacf11 100644 ---- a/src/mainboard/lenovo/x201/cmos.default -+++ b/src/mainboard/lenovo/x201/cmos.default -@@ -17,3 +17,4 @@ power_management_beeps=Enable - low_battery_beep=Enable - sata_mode=AHCI - usb_always_on=Disable -+gfx_uma_size=128M -diff --git a/src/mainboard/lenovo/x220/cmos.default b/src/mainboard/lenovo/x220/cmos.default -index b318ab9772..82292ea5d6 100644 ---- a/src/mainboard/lenovo/x220/cmos.default -+++ b/src/mainboard/lenovo/x220/cmos.default -@@ -16,3 +16,4 @@ fn_ctrl_swap=Disable - sticky_fn=Disable - trackpoint=Enable - me_state=Disabled -+gfx_uma_size=224M --- -2.39.5 - diff --git a/config/coreboot/default/patches/0030-haswell-NRI-Initialise-MPLL.patch b/config/coreboot/default/patches/0030-haswell-NRI-Initialise-MPLL.patch new file mode 100644 index 00000000..a1cf9b75 --- /dev/null +++ b/config/coreboot/default/patches/0030-haswell-NRI-Initialise-MPLL.patch @@ -0,0 +1,348 @@ +From 0966980e52286985fcd0fac6325bdd99f35ebcb8 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Thu, 11 Apr 2024 17:25:07 +0200 +Subject: [PATCH 30/51] haswell NRI: Initialise MPLL + +Add code to initialise the MPLL (Memory PLL). The procedure is similar +to the one for Sandy/Ivy Bridge, but it is not worth factoring out. + +Change-Id: I978c352de68f6d8cecc76f4ae3c12daaf4be9ed6 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 2 + + .../intel/haswell/native_raminit/init_mpll.c | 210 ++++++++++++++++++ + .../haswell/native_raminit/io_comp_control.c | 22 ++ + .../haswell/native_raminit/raminit_main.c | 3 +- + .../haswell/native_raminit/raminit_native.h | 11 + + .../intel/haswell/registers/mchbar.h | 3 + + 6 files changed, 250 insertions(+), 1 deletion(-) + create mode 100644 src/northbridge/intel/haswell/native_raminit/init_mpll.c + create mode 100644 src/northbridge/intel/haswell/native_raminit/io_comp_control.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index ebf7abc6ec..c125d84f0b 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -1,5 +1,7 @@ + ## SPDX-License-Identifier: GPL-2.0-or-later + ++romstage-y += init_mpll.c ++romstage-y += io_comp_control.c + romstage-y += raminit_main.c + romstage-y += raminit_native.c + romstage-y += spd_bitmunching.c +diff --git a/src/northbridge/intel/haswell/native_raminit/init_mpll.c b/src/northbridge/intel/haswell/native_raminit/init_mpll.c +new file mode 100644 +index 0000000000..1f3f2c29a9 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/init_mpll.c +@@ -0,0 +1,210 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++static uint32_t get_mem_multiplier(const struct sysinfo *ctrl) ++{ ++ const uint32_t mult = NS2MHZ_DIV256 / (ctrl->tCK * ctrl->base_freq); ++ ++ if (ctrl->base_freq == 100) ++ return clamp_u32(7, mult, 12); ++ ++ if (ctrl->base_freq == 133) ++ return clamp_u32(3, mult, 10); ++ ++ die("Unsupported base frequency\n"); ++} ++ ++static void normalize_tck(struct sysinfo *ctrl, const bool pll_ref100) ++{ ++ /** TODO: Haswell supports up to DDR3-2600 **/ ++ if (ctrl->tCK <= TCK_1200MHZ) { ++ ctrl->tCK = TCK_1200MHZ; ++ ctrl->base_freq = 133; ++ ctrl->mem_clock_mhz = 1200; ++ ++ } else if (ctrl->tCK <= TCK_1100MHZ) { ++ ctrl->tCK = TCK_1100MHZ; ++ ctrl->base_freq = 100; ++ ctrl->mem_clock_mhz = 1100; ++ ++ } else if (ctrl->tCK <= TCK_1066MHZ) { ++ ctrl->tCK = TCK_1066MHZ; ++ ctrl->base_freq = 133; ++ ctrl->mem_clock_mhz = 1066; ++ ++ } else if (ctrl->tCK <= TCK_1000MHZ) { ++ ctrl->tCK = TCK_1000MHZ; ++ ctrl->base_freq = 100; ++ ctrl->mem_clock_mhz = 1000; ++ ++ } else if (ctrl->tCK <= TCK_933MHZ) { ++ ctrl->tCK = TCK_933MHZ; ++ ctrl->base_freq = 133; ++ ctrl->mem_clock_mhz = 933; ++ ++ } else if (ctrl->tCK <= TCK_900MHZ) { ++ ctrl->tCK = TCK_900MHZ; ++ ctrl->base_freq = 100; ++ ctrl->mem_clock_mhz = 900; ++ ++ } else if (ctrl->tCK <= TCK_800MHZ) { ++ ctrl->tCK = TCK_800MHZ; ++ ctrl->base_freq = 133; ++ ctrl->mem_clock_mhz = 800; ++ ++ } else if (ctrl->tCK <= TCK_700MHZ) { ++ ctrl->tCK = TCK_700MHZ; ++ ctrl->base_freq = 100; ++ ctrl->mem_clock_mhz = 700; ++ ++ } else if (ctrl->tCK <= TCK_666MHZ) { ++ ctrl->tCK = TCK_666MHZ; ++ ctrl->base_freq = 133; ++ ctrl->mem_clock_mhz = 666; ++ ++ } else if (ctrl->tCK <= TCK_533MHZ) { ++ ctrl->tCK = TCK_533MHZ; ++ ctrl->base_freq = 133; ++ ctrl->mem_clock_mhz = 533; ++ ++ } else if (ctrl->tCK <= TCK_400MHZ) { ++ ctrl->tCK = TCK_400MHZ; ++ ctrl->base_freq = 133; ++ ctrl->mem_clock_mhz = 400; ++ ++ } else { ++ ctrl->tCK = 0; ++ ctrl->base_freq = 1; ++ ctrl->mem_clock_mhz = 0; ++ return; ++ } ++ if (!pll_ref100 && ctrl->base_freq == 100) { ++ /* Skip unsupported frequency */ ++ ctrl->tCK++; ++ normalize_tck(ctrl, pll_ref100); ++ } ++} ++ ++#define MIN_CAS 4 ++#define MAX_CAS 24 ++ ++static uint8_t find_compatible_cas(struct sysinfo *ctrl) ++{ ++ printk(RAM_DEBUG, "With tCK %u, try CAS: ", ctrl->tCK); ++ const uint8_t cas_lower = MAX(MIN_CAS, DIV_ROUND_UP(ctrl->tAA, ctrl->tCK)); ++ const uint8_t cas_upper = MIN(MAX_CAS, 19); /* JEDEC MR0 limit */ ++ ++ if (!(ctrl->cas_supported >> (cas_lower - MIN_CAS))) { ++ printk(RAM_DEBUG, "DIMMs do not support CAS >= %u\n", cas_lower); ++ ctrl->tCK++; ++ return 0; ++ } ++ for (uint8_t cas = cas_lower; cas <= cas_upper; cas++) { ++ printk(RAM_DEBUG, "%u ", cas); ++ if (ctrl->cas_supported & BIT(cas - MIN_CAS)) { ++ printk(RAM_DEBUG, "OK\n"); ++ return cas; ++ } ++ } ++ return 0; ++} ++ ++static enum raminit_status find_cas_tck(struct sysinfo *ctrl) ++{ ++ /** TODO: Honor all possible PLL_REF100_CFG values **/ ++ uint8_t pll_ref100 = (pci_read_config32(HOST_BRIDGE, CAPID0_B) >> 21) & 0x7; ++ printk(RAM_DEBUG, "PLL_REF100_CFG value: 0x%x\n", pll_ref100); ++ printk(RAM_DEBUG, "100MHz reference clock support: %s\n", pll_ref100 ? "yes" : "no"); ++ ++ uint8_t selected_cas; ++ while (true) { ++ /* Round tCK up so that it is a multiple of either 133 or 100 MHz */ ++ normalize_tck(ctrl, pll_ref100); ++ if (!ctrl->tCK) { ++ printk(BIOS_ERR, "Couldn't find compatible clock / CAS settings\n"); ++ return RAMINIT_STATUS_MPLL_INIT_FAILURE; ++ } ++ selected_cas = find_compatible_cas(ctrl); ++ if (selected_cas) ++ break; ++ ++ ctrl->tCK++; ++ } ++ printk(BIOS_DEBUG, "Found compatible clock / CAS settings\n"); ++ printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", NS2MHZ_DIV256 / ctrl->tCK); ++ printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", selected_cas); ++ ctrl->multiplier = get_mem_multiplier(ctrl); ++ return RAMINIT_STATUS_SUCCESS; ++} ++ ++enum raminit_status initialise_mpll(struct sysinfo *ctrl) ++{ ++ if (ctrl->tCK > TCK_400MHZ) { ++ printk(BIOS_ERR, "tCK is too slow. Increasing to 400 MHz as last resort\n"); ++ ctrl->tCK = TCK_400MHZ; ++ } ++ while (true) { ++ if (!ctrl->qclkps) { ++ const enum raminit_status status = find_cas_tck(ctrl); ++ if (status) ++ return status; ++ } ++ ++ /* ++ * Unlike previous generations, Haswell's MPLL won't shut down if the ++ * requested frequency isn't supported. But we cannot reinitialize it. ++ * Another different thing: MPLL registers are 4-bit instead of 8-bit. ++ */ ++ ++ /** FIXME: Obtain current clock frequency if we want to skip this **/ ++ //if (mchbar_read32(MC_BIOS_DATA) != 0) ++ // break; ++ ++ uint32_t mc_bios_req = ctrl->multiplier; ++ if (ctrl->base_freq == 100) { ++ /* Use 100 MHz reference clock */ ++ mc_bios_req |= BIT(4); ++ } ++ mc_bios_req |= BIT(31); ++ printk(RAM_DEBUG, "MC_BIOS_REQ = 0x%08x\n", mc_bios_req); ++ printk(BIOS_DEBUG, "MPLL busy... "); ++ mchbar_write32(MC_BIOS_REQ, mc_bios_req); ++ ++ for (unsigned int i = 0; i <= 5000; i++) { ++ if (!(mchbar_read32(MC_BIOS_REQ) & BIT(31))) { ++ printk(BIOS_DEBUG, "done in %u us\n", i); ++ break; ++ } ++ udelay(1); ++ } ++ if (mchbar_read32(MC_BIOS_REQ) & BIT(31)) ++ printk(BIOS_DEBUG, "did not lock\n"); ++ ++ /* Verify locked frequency */ ++ const uint32_t mc_bios_data = mchbar_read32(MC_BIOS_DATA); ++ printk(RAM_DEBUG, "MC_BIOS_DATA = 0x%08x\n", mc_bios_data); ++ if ((mc_bios_data & 0xf) >= ctrl->multiplier) ++ break; ++ ++ printk(BIOS_DEBUG, "Retrying at a lower frequency\n\n"); ++ ctrl->tCK++; ++ } ++ if (!ctrl->mem_clock_mhz) { ++ printk(BIOS_ERR, "Could not program MPLL frequency\n"); ++ return RAMINIT_STATUS_MPLL_INIT_FAILURE; ++ } ++ printk(BIOS_DEBUG, "MPLL frequency is set to: %u MHz ", ctrl->mem_clock_mhz); ++ ctrl->mem_clock_fs = 1000000000 / ctrl->mem_clock_mhz; ++ printk(BIOS_DEBUG, "(period: %u femtoseconds)\n", ctrl->mem_clock_fs); ++ ctrl->qclkps = ctrl->mem_clock_fs / 2000; ++ printk(BIOS_DEBUG, "Quadrature clock period: %u picoseconds\n", ctrl->qclkps); ++ return wait_for_first_rcomp(); ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c +new file mode 100644 +index 0000000000..d45b608dd3 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c +@@ -0,0 +1,22 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++enum raminit_status wait_for_first_rcomp(void) ++{ ++ struct stopwatch timer; ++ stopwatch_init_msecs_expire(&timer, 2000); ++ do { ++ if (mchbar_read32(RCOMP_TIMER) & BIT(16)) ++ return RAMINIT_STATUS_SUCCESS; ++ ++ } while (!stopwatch_expired(&timer)); ++ printk(BIOS_ERR, "Timed out waiting for RCOMP to complete\n"); ++ return RAMINIT_STATUS_POLL_TIMEOUT; ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 19ec5859ac..bf745e943f 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -19,7 +19,8 @@ struct task_entry { + }; + + static const struct task_entry cold_boot[] = { +- { collect_spd_info, true, "PROCSPD", }, ++ { collect_spd_info, true, "PROCSPD", }, ++ { initialise_mpll, true, "INITMPLL", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 8078c9c386..15a1550424 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -24,6 +24,8 @@ enum raminit_status { + RAMINIT_STATUS_SUCCESS = 0, + RAMINIT_STATUS_NO_MEMORY_INSTALLED, + RAMINIT_STATUS_UNSUPPORTED_MEMORY, ++ RAMINIT_STATUS_MPLL_INIT_FAILURE, ++ RAMINIT_STATUS_POLL_TIMEOUT, + RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ + }; + +@@ -83,10 +85,19 @@ struct sysinfo { + uint8_t rankmap[NUM_CHANNELS]; + uint8_t rank_mirrored[NUM_CHANNELS]; + uint32_t channel_size_mb[NUM_CHANNELS]; ++ ++ uint8_t base_freq; /* Memory base frequency, either 100 or 133 MHz */ ++ uint32_t multiplier; ++ uint32_t mem_clock_mhz; ++ uint32_t mem_clock_fs; /* Memory clock period in femtoseconds */ ++ uint32_t qclkps; /* Quadrature clock period in picoseconds */ + }; + + void raminit_main(enum raminit_boot_mode bootmode); + + enum raminit_status collect_spd_info(struct sysinfo *ctrl); ++enum raminit_status initialise_mpll(struct sysinfo *ctrl); ++ ++enum raminit_status wait_for_first_rcomp(void); + + #endif +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 5610e7089a..45f8174995 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -13,6 +13,8 @@ + #define MC_INIT_STATE_G 0x5030 + #define MRC_REVISION 0x5034 /* MRC Revision */ + ++#define RCOMP_TIMER 0x5084 ++ + #define MC_LOCK 0x50fc /* Memory Controller Lock register */ + + #define GFXVTBAR 0x5400 /* Base address for IGD */ +@@ -61,6 +63,7 @@ + + #define BIOS_RESET_CPL 0x5da8 /* 8-bit */ + ++#define MC_BIOS_REQ 0x5e00 /* Memory frequency request register */ + #define MC_BIOS_DATA 0x5e04 /* Miscellaneous information for BIOS */ + #define SAPMCTL 0x5f00 + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0031-dell-e6430-use-ME-Soft-Temporary-Disable.patch b/config/coreboot/default/patches/0031-dell-e6430-use-ME-Soft-Temporary-Disable.patch deleted file mode 100644 index ed0a7a08..00000000 --- a/config/coreboot/default/patches/0031-dell-e6430-use-ME-Soft-Temporary-Disable.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 7b1caf7260ab468fa2f0e6d73090c5412bc0254d Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sun, 5 Nov 2023 11:41:41 +0000 -Subject: [PATCH 31/65] dell/e6430: use ME Soft Temporary Disable - -i overlooked this. it's set on other boards. - -we use me_cleaner anyway, and we set the hap bit, but -this additional setting takes effect even if the ME -region is unaltered. it's just another layer of -disablement, to absolutely ensure Intel ME is not alive - -Signed-off-by: Leah Rowe ---- - src/mainboard/dell/snb_ivb_latitude/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/dell/snb_ivb_latitude/cmos.default b/src/mainboard/dell/snb_ivb_latitude/cmos.default -index 2a5b30f2b7..279415dfd1 100644 ---- a/src/mainboard/dell/snb_ivb_latitude/cmos.default -+++ b/src/mainboard/dell/snb_ivb_latitude/cmos.default -@@ -6,4 +6,4 @@ bluetooth=Enable - wwan=Enable - wlan=Enable - sata_mode=AHCI --me_state=Normal -+me_state=Disabled --- -2.39.5 - diff --git a/config/coreboot/default/patches/0031-haswell-NRI-Post-process-selected-timings.patch b/config/coreboot/default/patches/0031-haswell-NRI-Post-process-selected-timings.patch new file mode 100644 index 00000000..426cef35 --- /dev/null +++ b/config/coreboot/default/patches/0031-haswell-NRI-Post-process-selected-timings.patch @@ -0,0 +1,249 @@ +From 1dc22174b9b28b9ea9af59183ffd5d86d19a2721 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sat, 7 May 2022 16:29:55 +0200 +Subject: [PATCH 31/51] haswell NRI: Post-process selected timings + +Once the MPLL has been initialised, convert the timings from the SPD to +be in DCLKs, which is what the hardware expects. In addition, calculate +the values for tREFI and tXP. + +Change-Id: Id02caf858f75b9e08016762b3aefda282b274386 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/lookup_timings.c | 62 +++++++++++ + .../haswell/native_raminit/raminit_main.c | 1 + + .../haswell/native_raminit/raminit_native.h | 8 ++ + .../haswell/native_raminit/spd_bitmunching.c | 100 ++++++++++++++++++ + 5 files changed, 172 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/lookup_timings.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index c125d84f0b..2769e0bbb4 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -1,5 +1,6 @@ + ## SPDX-License-Identifier: GPL-2.0-or-later + ++romstage-y += lookup_timings.c + romstage-y += init_mpll.c + romstage-y += io_comp_control.c + romstage-y += raminit_main.c +diff --git a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c +new file mode 100644 +index 0000000000..8b81c7c341 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c +@@ -0,0 +1,62 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++ ++#include "raminit_native.h" ++ ++struct timing_lookup { ++ uint32_t clock; ++ uint32_t value; ++}; ++ ++static uint32_t lookup_timing( ++ const uint32_t mem_clock_mhz, ++ const struct timing_lookup *const lookup, ++ const size_t length) ++{ ++ /* Fall back to the last index */ ++ size_t i; ++ for (i = 0; i < length - 1; i++) { ++ /* Account for imprecise frequency values */ ++ if ((mem_clock_mhz - 5) <= lookup[i].clock) ++ break; ++ } ++ return lookup[i].value; ++} ++ ++static const uint32_t fmax = UINT32_MAX; ++ ++uint8_t get_tCWL(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 400, 5 }, ++ { 533, 6 }, ++ { 666, 7 }, ++ { 800, 8 }, ++ { 933, 9 }, ++ { 1066, 10 }, ++ { 1200, 11 }, ++ { fmax, 12 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} ++ ++/* tREFI = 7800 ns * DDR MHz */ ++uint32_t get_tREFI(const uint32_t mem_clock_mhz) ++{ ++ return (mem_clock_mhz * 7800) / 1000; ++} ++ ++uint32_t get_tXP(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 400, 3 }, ++ { 666, 4 }, ++ { 800, 5 }, ++ { 933, 6 }, ++ { 1066, 7 }, ++ { fmax, 8 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index bf745e943f..2fea658415 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -21,6 +21,7 @@ struct task_entry { + static const struct task_entry cold_boot[] = { + { collect_spd_info, true, "PROCSPD", }, + { initialise_mpll, true, "INITMPLL", }, ++ { convert_timings, true, "CONVTIM", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 15a1550424..e0ebd3a2a7 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -79,6 +79,9 @@ struct sysinfo { + uint32_t tCWL; + uint32_t tCMD; + ++ uint32_t tREFI; ++ uint32_t tXP; ++ + uint8_t lanes; /* 8 or 9 */ + uint8_t chanmap; + uint8_t dpc[NUM_CHANNELS]; /* DIMMs per channel */ +@@ -97,7 +100,12 @@ void raminit_main(enum raminit_boot_mode bootmode); + + enum raminit_status collect_spd_info(struct sysinfo *ctrl); + enum raminit_status initialise_mpll(struct sysinfo *ctrl); ++enum raminit_status convert_timings(struct sysinfo *ctrl); + + enum raminit_status wait_for_first_rcomp(void); + ++uint8_t get_tCWL(uint32_t mem_clock_mhz); ++uint32_t get_tREFI(uint32_t mem_clock_mhz); ++uint32_t get_tXP(uint32_t mem_clock_mhz); ++ + #endif +diff --git a/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c b/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c +index eff993800b..4f7fe46494 100644 +--- a/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c ++++ b/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c +@@ -204,3 +204,103 @@ enum raminit_status collect_spd_info(struct sysinfo *ctrl) + get_spd_data(ctrl); + return find_common_spd_parameters(ctrl); + } ++ ++#define MIN_CWL 5 ++#define MAX_CWL 12 ++ ++/* Except for tCK, hardware expects all timing values in DCLKs, not nanoseconds */ ++enum raminit_status convert_timings(struct sysinfo *ctrl) ++{ ++ /* ++ * Obtain all required timing values, in DCLKs. ++ */ ++ ++ /* Convert primary timings from nanoseconds to DCLKs */ ++ ctrl->tAA = DIV_ROUND_UP(ctrl->tAA, ctrl->tCK); ++ ctrl->tWR = DIV_ROUND_UP(ctrl->tWR, ctrl->tCK); ++ ctrl->tRCD = DIV_ROUND_UP(ctrl->tRCD, ctrl->tCK); ++ ctrl->tRRD = DIV_ROUND_UP(ctrl->tRRD, ctrl->tCK); ++ ctrl->tRP = DIV_ROUND_UP(ctrl->tRP, ctrl->tCK); ++ ctrl->tRAS = DIV_ROUND_UP(ctrl->tRAS, ctrl->tCK); ++ ctrl->tRC = DIV_ROUND_UP(ctrl->tRC, ctrl->tCK); ++ ctrl->tRFC = DIV_ROUND_UP(ctrl->tRFC, ctrl->tCK); ++ ctrl->tWTR = DIV_ROUND_UP(ctrl->tWTR, ctrl->tCK); ++ ctrl->tRTP = DIV_ROUND_UP(ctrl->tRTP, ctrl->tCK); ++ ctrl->tFAW = DIV_ROUND_UP(ctrl->tFAW, ctrl->tCK); ++ ctrl->tCWL = DIV_ROUND_UP(ctrl->tCWL, ctrl->tCK); ++ ctrl->tCMD = DIV_ROUND_UP(ctrl->tCMD, ctrl->tCK); ++ ++ /* Constrain primary timings to hardware limits */ ++ /** TODO: complain when clamping? **/ ++ ctrl->tAA = clamp_u32(4, ctrl->tAA, 24); ++ ctrl->tWR = clamp_u32(5, ctrl->tWR, 16); ++ ctrl->tRCD = clamp_u32(4, ctrl->tRCD, 20); ++ ctrl->tRRD = clamp_u32(4, ctrl->tRRD, 65535); ++ ctrl->tRP = clamp_u32(4, ctrl->tRP, 15); ++ ctrl->tRAS = clamp_u32(10, ctrl->tRAS, 40); ++ ctrl->tRC = clamp_u32(1, ctrl->tRC, 4095); ++ ctrl->tRFC = clamp_u32(1, ctrl->tRFC, 511); ++ ctrl->tWTR = clamp_u32(4, ctrl->tWTR, 10); ++ ctrl->tRTP = clamp_u32(4, ctrl->tRTP, 15); ++ ctrl->tFAW = clamp_u32(10, ctrl->tFAW, 54); ++ ++ /** TODO: Honor tREFI from XMP **/ ++ ctrl->tREFI = get_tREFI(ctrl->mem_clock_mhz); ++ ctrl->tXP = get_tXP(ctrl->mem_clock_mhz); ++ ++ /* ++ * Check some values, and adjust them if necessary. ++ */ ++ ++ /* If tWR cannot be written into DDR3 MR0, adjust it */ ++ switch (ctrl->tWR) { ++ case 9: ++ case 11: ++ case 13: ++ case 15: ++ ctrl->tWR++; ++ } ++ ++ /* If tCWL is not supported or unspecified, look up a reasonable default */ ++ if (ctrl->tCWL < MIN_CWL || ctrl->tCWL > MAX_CWL) ++ ctrl->tCWL = get_tCWL(ctrl->mem_clock_mhz); ++ ++ /* This is needed to support ODT properly on 2DPC */ ++ if (ctrl->tAA - ctrl->tCWL > 4) ++ ctrl->tCWL = ctrl->tAA - 4; ++ ++ /* If tCMD is invalid, use a guesstimate default */ ++ if (!ctrl->tCMD) { ++ ctrl->tCMD = MAX(ctrl->dpc[0], ctrl->dpc[1]); ++ printk(RAM_DEBUG, "tCMD was zero, picking a guesstimate value\n"); ++ } ++ ctrl->tCMD = clamp_u32(1, ctrl->tCMD, 3); ++ ++ /* ++ * Print final timings. ++ */ ++ ++ /* tCK is special */ ++ printk(BIOS_DEBUG, "Selected tCK : %u ps\n", ctrl->tCK * 1000 / 256); ++ ++ /* Primary timings */ ++ printk(BIOS_DEBUG, "Selected tAA : %uT\n", ctrl->tAA); ++ printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR); ++ printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD); ++ printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD); ++ printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP); ++ printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS); ++ printk(BIOS_DEBUG, "Selected tRC : %uT\n", ctrl->tRC); ++ printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC); ++ printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR); ++ printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP); ++ printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW); ++ printk(BIOS_DEBUG, "Selected tCWL : %uT\n", ctrl->tCWL); ++ printk(BIOS_DEBUG, "Selected tCMD : %uT\n", ctrl->tCMD); ++ ++ /* Derived timings */ ++ printk(BIOS_DEBUG, "Selected tREFI : %uT\n", ctrl->tREFI); ++ printk(BIOS_DEBUG, "Selected tXP : %uT\n", ctrl->tXP); ++ ++ return RAMINIT_STATUS_SUCCESS; ++} +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0032-haswell-NRI-Configure-initial-MC-settings.patch b/config/coreboot/default/patches/0032-haswell-NRI-Configure-initial-MC-settings.patch new file mode 100644 index 00000000..e16f4e3d --- /dev/null +++ b/config/coreboot/default/patches/0032-haswell-NRI-Configure-initial-MC-settings.patch @@ -0,0 +1,1594 @@ +From a4f5deb78c2d4132bf857c57ffd53684f942ba62 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sat, 7 May 2022 17:22:07 +0200 +Subject: [PATCH 32/51] haswell NRI: Configure initial MC settings + +Program initial memory controller settings. Many of these values will be +adjusted later during training. + +Change-Id: If33846b51cb1bab5d0458fe626e13afb1bdc900e +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 2 + + .../haswell/native_raminit/configure_mc.c | 822 ++++++++++++++++++ + .../haswell/native_raminit/raminit_main.c | 2 + + .../haswell/native_raminit/raminit_native.h | 101 +++ + .../haswell/native_raminit/reg_structs.h | 405 +++++++++ + .../haswell/native_raminit/timings_refresh.c | 13 + + .../intel/haswell/registers/mchbar.h | 94 ++ + 7 files changed, 1439 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/configure_mc.c + create mode 100644 src/northbridge/intel/haswell/native_raminit/reg_structs.h + create mode 100644 src/northbridge/intel/haswell/native_raminit/timings_refresh.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index 2769e0bbb4..fc55277a65 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -1,8 +1,10 @@ + ## SPDX-License-Identifier: GPL-2.0-or-later + ++romstage-y += configure_mc.c + romstage-y += lookup_timings.c + romstage-y += init_mpll.c + romstage-y += io_comp_control.c + romstage-y += raminit_main.c + romstage-y += raminit_native.c + romstage-y += spd_bitmunching.c ++romstage-y += timings_refresh.c +diff --git a/src/northbridge/intel/haswell/native_raminit/configure_mc.c b/src/northbridge/intel/haswell/native_raminit/configure_mc.c +new file mode 100644 +index 0000000000..88249725a7 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/configure_mc.c +@@ -0,0 +1,822 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++static void program_misc_control(struct sysinfo *ctrl) ++{ ++ if (!is_hsw_ult()) ++ return; ++ ++ const union ddr_scram_misc_control_reg ddr_scram_misc_ctrl = { ++ .ddr_no_ch_interleave = !ctrl->dq_pins_interleaved, ++ .lpddr_mode = ctrl->lpddr, ++ .cke_mapping_ch0 = ctrl->lpddr ? ctrl->lpddr_cke_rank_map[0] : 0, ++ .cke_mapping_ch1 = ctrl->lpddr ? ctrl->lpddr_cke_rank_map[1] : 0, ++ }; ++ mchbar_write32(DDR_SCRAM_MISC_CONTROL, ddr_scram_misc_ctrl.raw); ++} ++ ++static void program_mrc_revision(void) ++{ ++ mchbar_write32(MRC_REVISION, 0x01090000); /* MRC 1.9.0 Build 0 */ ++} ++ ++static void program_ranks_used(struct sysinfo *ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ mchbar_write8(MC_INIT_STATE_ch(channel), ctrl->rankmap[channel]); ++ if (!does_ch_exist(ctrl, channel)) { ++ mchbar_write32(DDR_CLK_ch_RANKS_USED(channel), 0); ++ mchbar_write32(DDR_CTL_ch_CTL_RANKS_USED(channel), 0); ++ mchbar_write32(DDR_CKE_ch_CTL_RANKS_USED(channel), 0); ++ continue; ++ } ++ uint32_t clk_ranks_used = ctrl->rankmap[channel]; ++ if (ctrl->lpddr) { ++ /* With LPDDR, the clock usage goes by group instead */ ++ clk_ranks_used = 0; ++ for (uint8_t group = 0; group < NUM_GROUPS; group++) { ++ if (ctrl->dq_byte_map[channel][CT_ITERATION_CLOCK][group]) ++ clk_ranks_used |= BIT(group); ++ } ++ } ++ mchbar_write32(DDR_CLK_ch_RANKS_USED(channel), clk_ranks_used); ++ ++ uint32_t ctl_ranks_used = ctrl->rankmap[channel]; ++ if (is_hsw_ult()) { ++ /* Set ODT disable bits */ ++ /** TODO: May need to do this after JEDEC reset/init **/ ++ if (ctrl->lpddr && ctrl->lpddr_dram_odt) ++ ctl_ranks_used |= 2 << 4; /* ODT is used on rank 0 */ ++ else ++ ctl_ranks_used |= 3 << 4; ++ } ++ mchbar_write32(DDR_CTL_ch_CTL_RANKS_USED(channel), ctl_ranks_used); ++ ++ uint32_t cke_ranks_used = ctrl->rankmap[channel]; ++ if (ctrl->lpddr) { ++ /* Use CKE-to-rank mapping for LPDDR */ ++ const uint8_t cke_rank_map = ctrl->lpddr_cke_rank_map[channel]; ++ cke_ranks_used = 0; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ /* ULT only has 2 ranks per channel */ ++ if (rank >= 2) ++ break; ++ ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t cke = 0; cke < 4; cke++) { ++ if (rank == ((cke_rank_map >> cke) & 1)) ++ cke_ranks_used |= BIT(cke); ++ } ++ } ++ } ++ mchbar_write32(DDR_CKE_ch_CTL_RANKS_USED(channel), cke_ranks_used); ++ } ++} ++ ++static const uint8_t rxb_trad[2][5][4] = { ++ { /* Vdd low */ ++ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, 1867 MT/s, 2133 MT/s, */ ++ {4, 3, 3, 2}, {4, 4, 3, 2}, {5, 4, 3, 3}, {5, 4, 4, 3}, {5, 4, 4, 3}, ++ }, ++ { /* Vdd hi */ ++ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, 1867 MT/s, 2133 MT/s, */ ++ {4, 3, 3, 2}, {4, 4, 3, 2}, {5, 4, 3, 3}, {5, 4, 4, 3}, {4, 4, 3, 3}, ++ }, ++}; ++ ++static const uint8_t rxb_ultx[2][3][4] = { ++ { /* Vdd low */ ++ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, */ ++ {5, 6, 6, 5}, {5, 6, 6, 5}, {4, 6, 6, 6}, ++ }, ++ { /* Vdd hi */ ++ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, */ ++ {7, 6, 6, 5}, {7, 6, 6, 5}, {7, 6, 6, 6}, ++ }, ++}; ++ ++uint8_t get_rx_bias(const struct sysinfo *ctrl) ++{ ++ const bool is_ult = is_hsw_ult(); ++ const bool vddhi = ctrl->vdd_mv > 1350; ++ const uint8_t max_rxf = is_ult ? ARRAY_SIZE(rxb_ultx[0]) : ARRAY_SIZE(rxb_trad[0]); ++ const uint8_t ref_clk = ctrl->base_freq == 133 ? 4 : 6; ++ const uint8_t rx_f = clamp_s8(0, ctrl->multiplier - ref_clk, max_rxf - 1); ++ const uint8_t rx_cb = mchbar_read32(DDR_CLK_CB_STATUS) & 0x3; ++ if (is_ult) ++ return rxb_ultx[vddhi][rx_f][rx_cb]; ++ else ++ return rxb_trad[vddhi][rx_f][rx_cb]; ++} ++ ++static void program_ddr_data(struct sysinfo *ctrl, const bool dis_odt_static, const bool vddhi) ++{ ++ const bool is_ult = is_hsw_ult(); ++ ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!does_rank_exist(ctrl, rank)) ++ continue; ++ ++ const union ddr_data_rx_train_rank_reg rx_train = { ++ .rcven = 64, ++ .dqs_p = 32, ++ .dqs_n = 32, ++ }; ++ mchbar_write32(DDR_DATA_RX_TRAIN_RANK(rank), rx_train.raw); ++ mchbar_write32(DDR_DATA_RX_PER_BIT_RANK(rank), 0x88888888); ++ ++ const union ddr_data_tx_train_rank_reg tx_train = { ++ .tx_eq = TXEQFULLDRV | 11, ++ .dq_delay = 96, ++ .dqs_delay = 64, ++ }; ++ mchbar_write32(DDR_DATA_TX_TRAIN_RANK(rank), tx_train.raw); ++ mchbar_write32(DDR_DATA_TX_PER_BIT_RANK(rank), 0x88888888); ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ ctrl->tx_dq[channel][rank][byte] = tx_train.dq_delay; ++ ctrl->txdqs[channel][rank][byte] = tx_train.dqs_delay; ++ ctrl->tx_eq[channel][rank][byte] = tx_train.tx_eq; ++ ++ ctrl->rcven[channel][rank][byte] = rx_train.rcven; ++ ctrl->rxdqsp[channel][rank][byte] = rx_train.dqs_p; ++ ctrl->rxdqsn[channel][rank][byte] = rx_train.dqs_n; ++ ctrl->rx_eq[channel][rank][byte] = rx_train.rx_eq; ++ } ++ } ++ } ++ mchbar_write32(DDR_DATA_TX_XTALK, 0); ++ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0x88888888); ++ mchbar_write32(DDR_DATA_OFFSET_TRAIN, 0); ++ mchbar_write32(DDR_DATA_OFFSET_COMP, 0); ++ ++ const union ddr_data_control_0_reg data_control_0 = { ++ .internal_clocks_on = !is_ult, ++ .data_vccddq_hi = vddhi, ++ .disable_odt_static = dis_odt_static, ++ .lpddr_mode = ctrl->lpddr, ++ .odt_samp_extend_en = ctrl->lpddr, ++ .early_rleak_en = ctrl->lpddr && ctrl->stepping >= STEPPING_C0, ++ }; ++ mchbar_write32(DDR_DATA_CONTROL_0, data_control_0.raw); ++ ++ const union ddr_data_control_1_reg data_control_1 = { ++ .dll_mask = 1, ++ .rx_bias_ctl = get_rx_bias(ctrl), ++ .odt_delay = -2, ++ .odt_duration = 7, ++ .sense_amp_delay = -2, ++ .sense_amp_duration = 7, ++ }; ++ mchbar_write32(DDR_DATA_CONTROL_1, data_control_1.raw); ++ ++ clear_data_offset_train_all(ctrl); ++ ++ /* Stagger byte turn-on to reduce dI/dT */ ++ const uint8_t byte_stagger[] = { 0, 4, 1, 5, 2, 6, 3, 7, 8 }; ++ const uint8_t latency = 2 * ctrl->tAA - 6; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ union ddr_data_control_2_reg data_control_2 = { ++ .raw = 0, ++ }; ++ if (is_ult) { ++ data_control_2.rx_dqs_amp_offset = 8; ++ data_control_2.rx_clk_stg_num = 0x1f; ++ data_control_2.leaker_comp = ctrl->lpddr ? 3 : 0; ++ } ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const uint8_t stg = latency * byte_stagger[byte] / ctrl->lanes; ++ data_control_2.rx_stagger_ctl = stg & 0x1f; ++ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); ++ ctrl->data_offset_comp[channel][byte] = 0; ++ ctrl->dq_control_1[channel][byte] = data_control_1.raw; ++ ctrl->dq_control_2[channel][byte] = data_control_2.raw; ++ } ++ ctrl->dq_control_0[channel] = data_control_0.raw; ++ } ++} ++ ++static void program_vsshi_control(struct sysinfo *ctrl, const uint16_t vsshi_mv) ++{ ++ const uint32_t vsshi_control_reg = is_hsw_ult() ? 0x366c : 0x306c; ++ const union ddr_comp_vsshi_control_reg ddr_vsshi_control = { ++ .vsshi_target = (vsshi_mv * 192) / ctrl->vdd_mv - 20, ++ .hi_bw_divider = 1, ++ .lo_bw_divider = 1, ++ .bw_error = 2, ++ .panic_driver_en = 1, ++ .panic_voltage = 24 / 8, /* Voltage in 8mV steps */ ++ .gain_boost = 1, ++ }; ++ mchbar_write32(vsshi_control_reg, ddr_vsshi_control.raw); ++ mchbar_write32(DDR_COMP_VSSHI_CONTROL, ddr_vsshi_control.raw); ++} ++ ++static void calc_vt_slope_code(const uint16_t slope, uint8_t *best_a, uint8_t *best_b) ++{ ++ const int16_t coding[] = {0, -125, -62, -31, 250, 125, 62, 31}; ++ *best_a = 0; ++ *best_b = 0; ++ int16_t best_err = slope; ++ for (uint8_t b = 0; b < ARRAY_SIZE(coding); b++) { ++ for (uint8_t a = b; a < ARRAY_SIZE(coding); a++) { ++ int16_t error = slope - (coding[a] + coding[b]); ++ if (error < 0) ++ error = -error; ++ ++ if (error < best_err) { ++ best_err = error; ++ *best_a = a; ++ *best_b = b; ++ } ++ } ++ } ++} ++ ++static void program_dimm_vref(struct sysinfo *ctrl, const uint16_t vccio_mv, const bool vddhi) ++{ ++ const bool is_ult = is_hsw_ult(); ++ ++ /* Static values for ULT */ ++ uint8_t vt_slope_a = 4; ++ uint8_t vt_slope_b = 0; ++ if (!is_ult) { ++ /* On non-ULT, compute best slope code */ ++ const uint16_t vt_slope = 1500 * vccio_mv / ctrl->vdd_mv - 1000; ++ calc_vt_slope_code(vt_slope, &vt_slope_a, &vt_slope_b); ++ } ++ const union ddr_data_vref_control_reg ddr_vref_control = { ++ .hi_bw_divider = is_ult ? 0 : 3, ++ .lo_bw_divider = 3, ++ .sample_divider = is_ult ? 1 : 3, ++ .slow_bw_error = 1, ++ .hi_bw_enable = 1, ++ .vt_slope_b = vt_slope_b, ++ .vt_slope_a = vt_slope_a, ++ .vt_offset = 0, ++ }; ++ mchbar_write32(is_ult ? 0xf68 : 0xf6c, ddr_vref_control.raw); /* Use CH1 byte 7 */ ++ ++ const union ddr_data_vref_adjust_reg ddr_vref_adjust = { ++ .en_dimm_vref_ca = 1, ++ .en_dimm_vref_ch0 = 1, ++ .en_dimm_vref_ch1 = 1, ++ .vccddq_hi_qnnn_h = vddhi, ++ .hi_z_timer_ctrl = 3, ++ }; ++ ctrl->dimm_vref = ddr_vref_adjust; ++ mchbar_write32(DDR_DATA_VREF_ADJUST, ddr_vref_adjust.raw); ++} ++ ++static uint32_t pi_code(const uint32_t code) ++{ ++ return code << 21 | code << 14 | code << 7 | code << 0; ++} ++ ++static void program_ddr_ca(struct sysinfo *ctrl, const bool vddhi) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ const union ddr_clk_controls_reg ddr_clk_controls = { ++ .dll_mask = 1, ++ .vccddq_hi = vddhi, ++ .lpddr_mode = ctrl->lpddr, ++ }; ++ mchbar_write32(DDR_CLK_ch_CONTROLS(channel), ddr_clk_controls.raw); ++ ++ const union ddr_cmd_controls_reg ddr_cmd_controls = { ++ .dll_mask = 1, ++ .vccddq_hi = vddhi, ++ .lpddr_mode = ctrl->lpddr, ++ .early_weak_drive = 3, ++ .cmd_tx_eq = 1, ++ }; ++ mchbar_write32(DDR_CMD_ch_CONTROLS(channel), ddr_cmd_controls.raw); ++ ++ const union ddr_cke_ctl_controls_reg ddr_cke_controls = { ++ .dll_mask = 1, ++ .vccddq_hi = vddhi, ++ .lpddr_mode = ctrl->lpddr, ++ .early_weak_drive = 3, ++ .cmd_tx_eq = 1, ++ .ctl_tx_eq = 1, ++ .ctl_sr_drv = 2, ++ }; ++ mchbar_write32(DDR_CKE_ch_CTL_CONTROLS(channel), ddr_cke_controls.raw); ++ ++ const union ddr_cke_ctl_controls_reg ddr_ctl_controls = { ++ .dll_mask = 1, ++ .vccddq_hi = vddhi, ++ .lpddr_mode = ctrl->lpddr, ++ .ctl_tx_eq = 1, ++ .ctl_sr_drv = 2, ++ .la_drv_en_ovrd = 1, /* Must be set on ULT */ ++ }; ++ mchbar_write32(DDR_CTL_ch_CTL_CONTROLS(channel), ddr_ctl_controls.raw); ++ ++ const uint8_t cmd_pi = ctrl->lpddr ? 96 : 64; ++ mchbar_write32(DDR_CMD_ch_PI_CODING(channel), pi_code(cmd_pi)); ++ mchbar_write32(DDR_CKE_ch_CMD_PI_CODING(channel), pi_code(cmd_pi)); ++ mchbar_write32(DDR_CKE_CTL_ch_CTL_PI_CODING(channel), pi_code(64)); ++ mchbar_write32(DDR_CLK_ch_PI_CODING(channel), pi_code(64)); ++ ++ mchbar_write32(DDR_CMD_ch_COMP_OFFSET(channel), 0); ++ mchbar_write32(DDR_CLK_ch_COMP_OFFSET(channel), 0); ++ mchbar_write32(DDR_CKE_CTL_ch_CTL_COMP_OFFSET(channel), 0); ++ ++ for (uint8_t group = 0; group < NUM_GROUPS; group++) { ++ ctrl->cke_cmd_pi_code[channel][group] = cmd_pi; ++ ctrl->cmd_north_pi_code[channel][group] = cmd_pi; ++ ctrl->cmd_south_pi_code[channel][group] = cmd_pi; ++ } ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ ctrl->clk_pi_code[channel][rank] = 64; ++ ctrl->ctl_pi_code[channel][rank] = 64; ++ } ++ } ++} ++ ++enum { ++ RCOMP_RD_ODT = 0, ++ RCOMP_WR_DS_DQ, ++ RCOMP_WR_DS_CMD, ++ RCOMP_WR_DS_CTL, ++ RCOMP_WR_DS_CLK, ++ RCOMP_MAX_CODES, ++}; ++ ++struct rcomp_info { ++ uint8_t resistor; ++ uint8_t sz_steps; ++ uint8_t target_r; ++ int8_t result; ++}; ++ ++static void program_rcomp_vref(struct sysinfo *ctrl, const bool dis_odt_static) ++{ ++ const bool is_ult = is_hsw_ult(); ++ /* ++ * +-------------------------------+ ++ * | Rcomp resistor values in ohms | ++ * +-----------+------+------+-----+ ++ * | Ball name | Trad | ULTX | Use | ++ * +-----------+------+------+-----+ ++ * | SM_RCOMP0 | 100 | 200 | CMD | ++ * | SM_RCOMP1 | 75 | 120 | DQ | ++ * | SM_RCOMP2 | 100 | 100 | ODT | ++ * +-----------+------+------+-----+ ++ */ ++ struct rcomp_info rcomp_cfg[RCOMP_MAX_CODES] = { ++ [RCOMP_RD_ODT] = { ++ .resistor = 50, ++ .sz_steps = 96, ++ .target_r = 50, ++ }, ++ [RCOMP_WR_DS_DQ] = { ++ .resistor = 25, ++ .sz_steps = 64, ++ .target_r = 33, ++ }, ++ [RCOMP_WR_DS_CMD] = { ++ .resistor = 20, ++ .sz_steps = 64, ++ .target_r = 20, ++ }, ++ [RCOMP_WR_DS_CTL] = { ++ .resistor = 20, ++ .sz_steps = 64, ++ .target_r = 20, ++ }, ++ [RCOMP_WR_DS_CLK] = { ++ .resistor = 25, ++ .sz_steps = 64, ++ .target_r = 29, ++ }, ++ }; ++ if (is_ult) { ++ rcomp_cfg[RCOMP_WR_DS_DQ].resistor = 40; ++ rcomp_cfg[RCOMP_WR_DS_DQ].target_r = 40; ++ rcomp_cfg[RCOMP_WR_DS_CLK].resistor = 40; ++ } else if (ctrl->dpc[0] == 2 || ctrl->dpc[1] == 2) { ++ rcomp_cfg[RCOMP_RD_ODT].target_r = 60; ++ } ++ for (uint8_t i = 0; i < RCOMP_MAX_CODES; i++) { ++ struct rcomp_info *const r = &rcomp_cfg[i]; ++ const int32_t div = 2 * (r->resistor + r->target_r); ++ assert(div); ++ const int32_t vref = (r->sz_steps * (r->resistor - r->target_r)) / div; ++ ++ /* DqOdt is 5 bits wide, the other Rcomp targets are 4 bits wide */ ++ const int8_t comp_limit = i == RCOMP_RD_ODT ? 16 : 8; ++ r->result = clamp_s32(-comp_limit, vref, comp_limit - 1); ++ } ++ const union ddr_comp_ctl_0_reg ddr_comp_ctl_0 = { ++ .disable_odt_static = dis_odt_static, ++ .dq_drv_vref = rcomp_cfg[RCOMP_WR_DS_DQ].result, ++ .dq_odt_vref = rcomp_cfg[RCOMP_RD_ODT].result, ++ .cmd_drv_vref = rcomp_cfg[RCOMP_WR_DS_CMD].result, ++ .ctl_drv_vref = rcomp_cfg[RCOMP_WR_DS_CTL].result, ++ .clk_drv_vref = rcomp_cfg[RCOMP_WR_DS_CLK].result, ++ }; ++ ctrl->comp_ctl_0 = ddr_comp_ctl_0; ++ mchbar_write32(DDR_COMP_CTL_0, ctrl->comp_ctl_0.raw); ++} ++ ++enum { ++ SCOMP_DQ = 0, ++ SCOMP_CMD, ++ SCOMP_CTL, ++ SCOMP_CLK, ++ SCOMP_MAX_CODES, ++}; ++ ++static void program_slew_rates(struct sysinfo *ctrl, const bool vddhi) ++{ ++ const uint8_t min_cycle_delay[SCOMP_MAX_CODES] = { 46, 70, 70, 46 }; ++ uint8_t buffer_stage_delay_ps[SCOMP_MAX_CODES] = { 59, 53, 53, 53 }; ++ uint16_t comp_slew_rate_codes[SCOMP_MAX_CODES]; ++ ++ /* CMD Slew Rate = 1.8 for 2N */ ++ if (ctrl->tCMD == 2) ++ buffer_stage_delay_ps[SCOMP_CMD] = 89; ++ ++ /* CMD Slew Rate = 4 V/ns for double-pumped CMD bus */ ++ if (ctrl->lpddr) ++ buffer_stage_delay_ps[SCOMP_CMD] = 63; ++ ++ for (uint8_t i = 0; i < SCOMP_MAX_CODES; i++) { ++ uint16_t stages = DIV_ROUND_CLOSEST(ctrl->qclkps, buffer_stage_delay_ps[i]); ++ if (stages < 5) ++ stages = 5; ++ ++ bool dll_pc = buffer_stage_delay_ps[i] < min_cycle_delay[i] || stages > 16; ++ ++ /* Lock DLL... */ ++ if (dll_pc) ++ comp_slew_rate_codes[i] = stages / 2 - 1; /* to a phase */ ++ else ++ comp_slew_rate_codes[i] = (stages - 1) | BIT(4); /* to a cycle */ ++ } ++ union ddr_comp_ctl_1_reg ddr_comp_ctl_1 = { ++ .dq_scomp = comp_slew_rate_codes[SCOMP_DQ], ++ .cmd_scomp = comp_slew_rate_codes[SCOMP_CMD], ++ .ctl_scomp = comp_slew_rate_codes[SCOMP_CTL], ++ .clk_scomp = comp_slew_rate_codes[SCOMP_CLK], ++ .vccddq_hi = vddhi, ++ }; ++ ctrl->comp_ctl_1 = ddr_comp_ctl_1; ++ mchbar_write32(DDR_COMP_CTL_1, ctrl->comp_ctl_1.raw); ++} ++ ++static uint32_t ln_x100(const uint32_t input_x100) ++{ ++ uint32_t val = input_x100; ++ uint32_t ret = 0; ++ while (val > 271) { ++ val = (val * 1000) / 2718; ++ ret += 100; ++ } ++ return ret + (-16 * val * val + 11578 * val - 978860) / 10000; ++} ++ ++static uint32_t compute_vsshi_vref(struct sysinfo *ctrl, const uint32_t vsshi_tgt, bool up) ++{ ++ const uint32_t delta = 15; ++ const uint32_t c_die_vsshi = 2000; ++ const uint32_t r_cmd_ref = 100 * 10; ++ const uint32_t offset = up ? 64 : 0; ++ const uint32_t ln_vsshi = ln_x100((100 * vsshi_tgt) / (vsshi_tgt - delta)); ++ const uint32_t r_target = (ctrl->qclkps * 2000) / (c_die_vsshi * ln_vsshi); ++ const uint32_t r_dividend = 128 * (up ? r_cmd_ref : r_target); ++ return r_dividend / (r_cmd_ref + r_target) - offset; ++} ++ ++static void program_vsshi(struct sysinfo *ctrl, const uint16_t vccio_mv, const uint16_t vsshi) ++{ ++ const uint16_t vsshi_down = vsshi + 24; /* Panic threshold of 24 mV */ ++ const uint16_t vsshi_up = vccio_mv - vsshi_down; ++ const union ddr_comp_vsshi_reg ddr_comp_vsshi = { ++ .panic_drv_down_vref = compute_vsshi_vref(ctrl, vsshi_down, false), ++ .panic_drv_up_vref = compute_vsshi_vref(ctrl, vsshi_up, true), ++ .vt_offset = 128 * 450 / vccio_mv / 2, ++ .vt_slope_a = 4, ++ }; ++ mchbar_write32(DDR_COMP_VSSHI, ddr_comp_vsshi.raw); ++} ++ ++static void program_misc(struct sysinfo *ctrl) ++{ ++ ctrl->misc_control_0.raw = mchbar_read32(DDR_SCRAM_MISC_CONTROL); ++ ctrl->misc_control_0.weaklock_latency = 12; ++ ctrl->misc_control_0.wl_sleep_cycles = 5; ++ ctrl->misc_control_0.wl_wake_cycles = 2; ++ mchbar_write32(DDR_SCRAM_MISC_CONTROL, ctrl->misc_control_0.raw); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ /* Keep scrambling disabled for training */ ++ mchbar_write32(DDR_SCRAMBLE_ch(channel), 0); ++ } ++} ++ ++/* Very weird, application-specific function */ ++static void override_comp(uint32_t value, uint32_t width, uint32_t shift, uint32_t offset) ++{ ++ const uint32_t mask = (1 << width) - 1; ++ uint32_t reg32 = mchbar_read32(offset); ++ reg32 &= ~(mask << shift); ++ reg32 |= (value << shift); ++ mchbar_write32(offset, reg32); ++} ++ ++static void program_ls_comp(struct sysinfo *ctrl) ++{ ++ /* Disable periodic COMP */ ++ const union pcu_comp_reg m_comp = { ++ .comp_disable = 1, ++ .comp_interval = COMP_INT, ++ .comp_force = 1, ++ }; ++ mchbar_write32(M_COMP, m_comp.raw); ++ udelay(10); ++ ++ /* Override level shifter compensation */ ++ const uint32_t ls_comp = 2; ++ override_comp(ls_comp, 3, 28, DDR_DATA_RCOMP_DATA_1); ++ override_comp(ls_comp, 3, 24, DDR_CMD_COMP); ++ override_comp(ls_comp, 3, 24, DDR_CKE_CTL_COMP); ++ override_comp(ls_comp, 3, 23, DDR_CLK_COMP); ++ override_comp(ls_comp, 3, 28, DDR_COMP_DATA_COMP_1); ++ override_comp(ls_comp, 3, 24, DDR_COMP_CMD_COMP); ++ override_comp(ls_comp, 4, 24, DDR_COMP_CTL_COMP); ++ override_comp(ls_comp, 4, 23, DDR_COMP_CLK_COMP); ++ override_comp(ls_comp, 3, 24, DDR_COMP_OVERRIDE); ++ ++ /* Manually update the COMP values */ ++ union ddr_scram_misc_control_reg ddr_scram_misc_ctrl = ctrl->misc_control_0; ++ ddr_scram_misc_ctrl.force_comp_update = 1; ++ mchbar_write32(DDR_SCRAM_MISC_CONTROL, ddr_scram_misc_ctrl.raw); ++ ++ /* Use a fixed offset between ODT Up/Dn */ ++ const union ddr_comp_data_comp_1_reg data_comp_1 = { ++ .raw = mchbar_read32(DDR_COMP_DATA_COMP_1), ++ }; ++ const uint32_t odt_offset = data_comp_1.rcomp_odt_down - data_comp_1.rcomp_odt_up; ++ ctrl->comp_ctl_0.odt_up_down_off = odt_offset; ++ ctrl->comp_ctl_0.fixed_odt_offset = 1; ++ mchbar_write32(DDR_COMP_CTL_0, ctrl->comp_ctl_0.raw); ++} ++ ++/** TODO: Deduplicate PCODE stuff, it's already implemented in CPU code **/ ++static bool pcode_ready(void) ++{ ++ const unsigned int delay_step = 10; ++ for (unsigned int i = 0; i < 1000; i += delay_step) { ++ if (!(mchbar_read32(BIOS_MAILBOX_INTERFACE) & MAILBOX_RUN_BUSY)) ++ return true; ++ ++ udelay(delay_step); ++ }; ++ return false; ++} ++ ++static uint32_t pcode_mailbox_read(const uint32_t command) ++{ ++ if (!pcode_ready()) { ++ printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready\n"); ++ return 0; ++ } ++ mchbar_write32(BIOS_MAILBOX_INTERFACE, command | MAILBOX_RUN_BUSY); ++ if (!pcode_ready()) { ++ printk(BIOS_ERR, "PCODE: mailbox timeout on completion\n"); ++ return 0; ++ } ++ return mchbar_read32(BIOS_MAILBOX_DATA); ++} ++ ++static int pcode_mailbox_write(const uint32_t command, const uint32_t data) ++{ ++ if (!pcode_ready()) { ++ printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready\n"); ++ return -1; ++ } ++ mchbar_write32(BIOS_MAILBOX_DATA, data); ++ mchbar_write32(BIOS_MAILBOX_INTERFACE, command | MAILBOX_RUN_BUSY); ++ if (!pcode_ready()) { ++ printk(BIOS_ERR, "PCODE: mailbox timeout on completion\n"); ++ return -1; ++ } ++ return 0; ++} ++ ++static void enable_2x_refresh(struct sysinfo *ctrl) ++{ ++ if (!CONFIG(ENABLE_DDR_2X_REFRESH)) ++ return; ++ ++ printk(BIOS_DEBUG, "Enabling 2x Refresh\n"); ++ const bool asr = ctrl->flags.asr; ++ const bool lpddr = ctrl->lpddr; ++ ++ /* Mutually exclusive */ ++ assert(!asr || !lpddr); ++ if (!asr) { ++ uint32_t reg32 = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_DDR_2X_REFRESH); ++ if (!(reg32 & BIT(31))) { /** TODO: What to do if this is locked? **/ ++ reg32 |= BIT(0); /* Enable 2x refresh */ ++ reg32 |= BIT(31); /* Lock */ ++ ++ if (lpddr) ++ reg32 |= 4 << 1; /* LPDDR MR4 1/2 tREFI */ ++ ++ if (pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_DDR_2X_REFRESH, reg32)) ++ printk(BIOS_ERR, "Could not enable Mailbox 2x Refresh\n"); ++ } ++ if (!lpddr) ++ return; ++ } ++ assert(asr || lpddr); ++ uint16_t refi_reduction = 50; ++ if (lpddr) { ++ refi_reduction = 97; ++ mchbar_clrbits32(PCU_DDR_PTM_CTL, 1 << 7); /* DISABLE_DRAM_TS */ ++ } ++ /** TODO: Remember why this is only done on cold boots **/ ++ if (ctrl->bootmode == BOOTMODE_COLD) { ++ ctrl->tREFI *= refi_reduction; ++ ctrl->tREFI /= 100; ++ } ++} ++ ++static void set_pcu_ddr_voltage(const uint16_t vdd_mv) ++{ ++ /** TODO: Handle other voltages? **/ ++ uint32_t pcu_ddr_voltage; ++ switch (vdd_mv) { ++ case 1200: ++ pcu_ddr_voltage = 3; ++ break; ++ case 1350: ++ pcu_ddr_voltage = 1; ++ break; ++ default: ++ case 1500: ++ pcu_ddr_voltage = 0; ++ break; ++ } ++ /* Set bits 0..2 */ ++ mchbar_write32(PCU_DDR_VOLTAGE, pcu_ddr_voltage); ++} ++ ++static void program_scheduler(struct sysinfo *ctrl) ++{ ++ /* ++ * ZQ calibration needs to be serialized for LPDDR3. Otherwise, ++ * the processor issues LPDDR3 ZQ calibration in parallel when ++ * exiting Package C7 or deeper. This causes problems for dual ++ * and quad die packages since all ranks share the same ZQ pin. ++ * ++ * Erratum HSM94: LPDDR3 ZQ Calibration Following Deep Package ++ * C-state Exit May Lead to Unpredictable System Behavior ++ */ ++ const union mcscheds_cbit_reg mcscheds_cbit = { ++ .dis_write_gap = 1, ++ .dis_odt = is_hsw_ult() && !(ctrl->lpddr && ctrl->lpddr_dram_odt), ++ .serialize_zq = ctrl->lpddr, ++ }; ++ mchbar_write32(MCSCHEDS_CBIT, mcscheds_cbit.raw); ++ mchbar_write32(MCMNTS_SC_WDBWM, 0x553c3038); ++ if (ctrl->lpddr) { ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ union mcmain_command_rate_limit_reg cmd_rate_limit = { ++ .raw = mchbar_read32(COMMAND_RATE_LIMIT_ch(channel)), ++ }; ++ cmd_rate_limit.enable_cmd_limit = 1; ++ cmd_rate_limit.cmd_rate_limit = 3; ++ mchbar_write32(COMMAND_RATE_LIMIT_ch(channel), cmd_rate_limit.raw); ++ } ++ } ++} ++ ++static uint8_t biggest_channel(const struct sysinfo *const ctrl) ++{ ++ _Static_assert(NUM_CHANNELS == 2, "Code assumes exactly two channels"); ++ return !!(ctrl->channel_size_mb[0] < ctrl->channel_size_mb[1]); ++} ++ ++static void dram_zones(struct sysinfo *ctrl) ++{ ++ /** TODO: Activate channel hash here, if enabled **/ ++ const uint8_t biggest = biggest_channel(ctrl); ++ const uint8_t smaller = !biggest; ++ ++ /** TODO: Use stacked mode if Memory Trace is enabled **/ ++ const union mad_chnl_reg mad_channel = { ++ .ch_a = biggest, ++ .ch_b = smaller, ++ .ch_c = 2, ++ .lpddr_mode = ctrl->lpddr, ++ }; ++ mchbar_write32(MAD_CHNL, mad_channel.raw); ++ ++ const uint8_t channel_b_zone_size = ctrl->channel_size_mb[smaller] / 256; ++ const union mad_zr_reg mad_zr = { ++ .ch_b_double = channel_b_zone_size * 2, ++ .ch_b_single = channel_b_zone_size, ++ }; ++ mchbar_write32(MAD_ZR, mad_zr.raw); ++} ++ ++static uint8_t biggest_dimm(const struct raminit_dimm_info *dimms) ++{ ++ _Static_assert(NUM_SLOTS <= 2, "Code assumes at most two DIMMs per channel."); ++ if (NUM_SLOTS == 1) ++ return 0; ++ ++ return !!(dimms[0].data.size_mb < dimms[1].data.size_mb); ++} ++ ++static void dram_dimm_mapping(struct sysinfo *ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) { ++ const union mad_dimm_reg mad_dimm = { ++ .rank_interleave = 1, ++ .enh_interleave = 1, ++ }; ++ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); ++ continue; ++ } ++ const uint8_t biggest = biggest_dimm(ctrl->dimms[channel]); ++ const uint8_t smaller = !biggest; ++ const struct dimm_attr_ddr3_st *dimm_a = &ctrl->dimms[channel][biggest].data; ++ const struct dimm_attr_ddr3_st *dimm_b = &ctrl->dimms[channel][smaller].data; ++ union mad_dimm_reg mad_dimm = { ++ .dimm_a_size = dimm_a->size_mb / 256, ++ .dimm_b_size = dimm_b->size_mb / 256, ++ .dimm_a_sel = biggest, ++ .dimm_a_ranks = dimm_a->ranks == 2, ++ .dimm_b_ranks = dimm_b->ranks == 2, ++ .dimm_a_width = dimm_a->width == 16, ++ .dimm_b_width = dimm_b->width == 16, ++ .rank_interleave = 1, ++ .enh_interleave = 1, ++ .ecc_mode = 0, /* Do not enable ECC yet */ ++ }; ++ if (is_hsw_ult()) ++ mad_dimm.dimm_b_width = mad_dimm.dimm_a_width; ++ ++ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); ++ if (ctrl->lpddr) ++ die("%s: Missing LPDDR support (LPDDR_MR_PARAMS)\n", __func__); ++ } ++} ++ ++enum raminit_status configure_mc(struct sysinfo *ctrl) ++{ ++ const uint16_t vccio_mv = 1000; ++ const uint16_t vsshi_mv = ctrl->vdd_mv - 950; ++ const bool dis_odt_static = is_hsw_ult(); /* Disable static ODT legs on ULT */ ++ const bool vddhi = ctrl->vdd_mv > 1350; ++ ++ program_misc_control(ctrl); ++ program_mrc_revision(); ++ program_ranks_used(ctrl); ++ program_ddr_data(ctrl, dis_odt_static, vddhi); ++ program_vsshi_control(ctrl, vsshi_mv); ++ program_dimm_vref(ctrl, vccio_mv, vddhi); ++ program_ddr_ca(ctrl, vddhi); ++ program_rcomp_vref(ctrl, dis_odt_static); ++ program_slew_rates(ctrl, vddhi); ++ program_vsshi(ctrl, vccio_mv, vsshi_mv); ++ program_misc(ctrl); ++ program_ls_comp(ctrl); ++ enable_2x_refresh(ctrl); ++ set_pcu_ddr_voltage(ctrl->vdd_mv); ++ configure_timings(ctrl); ++ configure_refresh(ctrl); ++ program_scheduler(ctrl); ++ dram_zones(ctrl); ++ dram_dimm_mapping(ctrl); ++ ++ return RAMINIT_STATUS_SUCCESS; ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 2fea658415..fcc981ad04 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -22,6 +22,7 @@ static const struct task_entry cold_boot[] = { + { collect_spd_info, true, "PROCSPD", }, + { initialise_mpll, true, "INITMPLL", }, + { convert_timings, true, "CONVTIM", }, ++ { configure_mc, true, "CONFMC", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +@@ -53,6 +54,7 @@ static void initialize_ctrl(struct sysinfo *ctrl) + + ctrl->cpu = cpu_get_cpuid(); + ctrl->stepping = get_stepping(ctrl->cpu); ++ ctrl->vdd_mv = is_hsw_ult() ? 1350 : 1500; /** FIXME: Hardcoded, does it matter? **/ + ctrl->dq_pins_interleaved = cfg->dq_pins_interleaved; + ctrl->bootmode = bootmode; + } +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index e0ebd3a2a7..fffa6d5450 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -3,16 +3,41 @@ + #ifndef HASWELL_RAMINIT_NATIVE_H + #define HASWELL_RAMINIT_NATIVE_H + ++#include + #include + #include ++#include ++#include ++ ++#include "reg_structs.h" + + /** TODO (Angel): Remove this after in-review patches are submitted **/ + #define SPD_LEN SPD_SIZE_MAX_DDR3 + ++/* Each channel has 4 ranks, spread across 2 slots */ ++#define NUM_SLOTRANKS 4 ++ ++#define NUM_GROUPS 2 ++ + /* 8 data lanes + 1 ECC lane */ + #define NUM_LANES 9 + #define NUM_LANES_NO_ECC 8 + ++#define COMP_INT 10 ++ ++/* Always use 12 legs for emphasis (not trained) */ ++#define TXEQFULLDRV (3 << 4) ++ ++enum command_training_iteration { ++ CT_ITERATION_CLOCK = 0, ++ CT_ITERATION_CMD_NORTH, ++ CT_ITERATION_CMD_SOUTH, ++ CT_ITERATION_CKE, ++ CT_ITERATION_CTL, ++ CT_ITERATION_CMD_VREF, ++ MAX_CT_ITERATION, ++}; ++ + enum raminit_boot_mode { + BOOTMODE_COLD, + BOOTMODE_WARM, +@@ -58,6 +83,9 @@ struct sysinfo { + * LPDDR-specific functions have stubs which will halt upon execution. + */ + bool lpddr; ++ bool lpddr_dram_odt; ++ uint8_t lpddr_cke_rank_map[NUM_CHANNELS]; ++ uint8_t dq_byte_map[NUM_CHANNELS][MAX_CT_ITERATION][2]; + + struct raminit_dimm_info dimms[NUM_CHANNELS][NUM_SLOTS]; + union dimm_flags_ddr3_st flags; +@@ -94,16 +122,89 @@ struct sysinfo { + uint32_t mem_clock_mhz; + uint32_t mem_clock_fs; /* Memory clock period in femtoseconds */ + uint32_t qclkps; /* Quadrature clock period in picoseconds */ ++ ++ uint16_t vdd_mv; ++ ++ union ddr_scram_misc_control_reg misc_control_0; ++ ++ union ddr_comp_ctl_0_reg comp_ctl_0; ++ union ddr_comp_ctl_1_reg comp_ctl_1; ++ ++ union ddr_data_vref_adjust_reg dimm_vref; ++ ++ uint32_t data_offset_train[NUM_CHANNELS][NUM_LANES]; ++ uint32_t data_offset_comp[NUM_CHANNELS][NUM_LANES]; ++ ++ uint32_t dq_control_0[NUM_CHANNELS]; ++ uint32_t dq_control_1[NUM_CHANNELS][NUM_LANES]; ++ uint32_t dq_control_2[NUM_CHANNELS][NUM_LANES]; ++ ++ uint16_t tx_dq[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ uint16_t txdqs[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ uint8_t tx_eq[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ ++ uint16_t rcven[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ uint8_t rx_eq[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ uint8_t rxdqsp[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ uint8_t rxdqsn[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ int8_t rxvref[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; ++ ++ uint8_t clk_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; ++ uint8_t ctl_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; ++ uint8_t cke_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; ++ ++ uint8_t cke_cmd_pi_code[NUM_CHANNELS][NUM_GROUPS]; ++ uint8_t cmd_north_pi_code[NUM_CHANNELS][NUM_GROUPS]; ++ uint8_t cmd_south_pi_code[NUM_CHANNELS][NUM_GROUPS]; + }; + ++static inline bool is_hsw_ult(void) ++{ ++ return CONFIG(INTEL_LYNXPOINT_LP); ++} ++ ++static inline bool rank_in_mask(uint8_t rank, uint8_t rankmask) ++{ ++ assert(rank < NUM_SLOTRANKS); ++ return !!(BIT(rank) & rankmask); ++} ++ ++static inline bool does_ch_exist(const struct sysinfo *ctrl, uint8_t channel) ++{ ++ return !!ctrl->dpc[channel]; ++} ++ ++static inline bool does_rank_exist(const struct sysinfo *ctrl, uint8_t rank) ++{ ++ return rank_in_mask(rank, ctrl->rankmap[0] | ctrl->rankmap[1]); ++} ++ ++static inline bool rank_in_ch(const struct sysinfo *ctrl, uint8_t rank, uint8_t channel) ++{ ++ assert(channel < NUM_CHANNELS); ++ return rank_in_mask(rank, ctrl->rankmap[channel]); ++} ++ ++/** TODO: Handling of data_offset_train could be improved, also coupled with reg updates **/ ++static inline void clear_data_offset_train_all(struct sysinfo *ctrl) ++{ ++ memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); ++} ++ + void raminit_main(enum raminit_boot_mode bootmode); + + enum raminit_status collect_spd_info(struct sysinfo *ctrl); + enum raminit_status initialise_mpll(struct sysinfo *ctrl); + enum raminit_status convert_timings(struct sysinfo *ctrl); ++enum raminit_status configure_mc(struct sysinfo *ctrl); ++ ++void configure_timings(struct sysinfo *ctrl); ++void configure_refresh(struct sysinfo *ctrl); + + enum raminit_status wait_for_first_rcomp(void); + ++uint8_t get_rx_bias(const struct sysinfo *ctrl); ++ + uint8_t get_tCWL(uint32_t mem_clock_mhz); + uint32_t get_tREFI(uint32_t mem_clock_mhz); + uint32_t get_tXP(uint32_t mem_clock_mhz); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +new file mode 100644 +index 0000000000..d11cda4b3d +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -0,0 +1,405 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#ifndef HASWELL_RAMINIT_REG_STRUCTS_H ++#define HASWELL_RAMINIT_REG_STRUCTS_H ++ ++union ddr_data_rx_train_rank_reg { ++ struct __packed { ++ uint32_t rcven : 9; // Bits 8:0 ++ uint32_t dqs_p : 6; // Bits 14:9 ++ uint32_t rx_eq : 5; // Bits 19:15 ++ uint32_t dqs_n : 6; // Bits 25:20 ++ int32_t vref : 6; // Bits 31:26 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_data_tx_train_rank_reg { ++ struct __packed { ++ uint32_t dq_delay : 9; // Bits 8:0 ++ uint32_t dqs_delay : 9; // Bits 17:9 ++ uint32_t : 2; // Bits 19:18 ++ uint32_t tx_eq : 6; // Bits 25:20 ++ uint32_t : 6; // Bits 31:26 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_data_control_0_reg { ++ struct __packed { ++ uint32_t rx_training_mode : 1; // Bits 0:0 ++ uint32_t wl_training_mode : 1; // Bits 1:1 ++ uint32_t rl_training_mode : 1; // Bits 2:2 ++ uint32_t samp_train_mode : 1; // Bits 3:3 ++ uint32_t tx_on : 1; // Bits 4:4 ++ uint32_t rf_on : 1; // Bits 5:5 ++ uint32_t rx_pi_on : 1; // Bits 6:6 ++ uint32_t tx_pi_on : 1; // Bits 7:7 ++ uint32_t internal_clocks_on : 1; // Bits 8:8 ++ uint32_t repeater_clocks_on : 1; // Bits 9:9 ++ uint32_t tx_disable : 1; // Bits 10:10 ++ uint32_t rx_disable : 1; // Bits 11:11 ++ uint32_t tx_long : 1; // Bits 12:12 ++ uint32_t rx_dqs_ctle : 2; // Bits 14:13 ++ uint32_t rx_read_pointer : 3; // Bits 17:15 ++ uint32_t driver_segment_enable : 1; // Bits 18:18 ++ uint32_t data_vccddq_hi : 1; // Bits 19:19 ++ uint32_t read_rf_rd : 1; // Bits 20:20 ++ uint32_t read_rf_wr : 1; // Bits 21:21 ++ uint32_t read_rf_rank : 2; // Bits 23:22 ++ uint32_t force_odt_on : 1; // Bits 24:24 ++ uint32_t odt_samp_off : 1; // Bits 25:25 ++ uint32_t disable_odt_static : 1; // Bits 26:26 ++ uint32_t ddr_cr_force_odt_on : 1; // Bits 27:27 ++ uint32_t lpddr_mode : 1; // Bits 28:28 ++ uint32_t en_read_preamble : 1; // Bits 29:29 ++ uint32_t odt_samp_extend_en : 1; // Bits 30:30 ++ uint32_t early_rleak_en : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_data_control_1_reg { ++ struct __packed { ++ int32_t ref_pi : 4; // Bits 3:0 ++ uint32_t dll_mask : 2; // Bits 5:4 ++ uint32_t dll_weaklock : 1; // Bits 6:6 ++ uint32_t sdll_segment_disable : 3; // Bits 9:7 ++ uint32_t rx_bias_ctl : 3; // Bits 12:10 ++ int32_t odt_delay : 4; // Bits 16:13 ++ uint32_t odt_duration : 3; // Bits 19:17 ++ int32_t sense_amp_delay : 4; // Bits 23:20 ++ uint32_t sense_amp_duration : 3; // Bits 26:24 ++ uint32_t burst_end_odt_delay : 3; // Bits 29:27 *** TODO: Check Broadwell *** ++ uint32_t lpddr_long_odt_en : 1; // Bits 30:30 ++ uint32_t : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++/* NOTE: Bits 31:19 are only valid for Broadwell onwards */ ++union ddr_data_control_2_reg { ++ struct __packed { ++ uint32_t rx_stagger_ctl : 5; // Bits 4:0 ++ uint32_t force_bias_on : 1; // Bits 5:5 ++ uint32_t force_rx_on : 1; // Bits 6:6 ++ uint32_t leaker_comp : 2; // Bits 8:7 ++ uint32_t rx_dqs_amp_offset : 4; // Bits 12:9 ++ uint32_t rx_clk_stg_num : 5; // Bits 17:13 ++ uint32_t wl_long_delay : 1; // Bits 18:18 ++ uint32_t enable_vref_pwrdn : 1; // Bits 19:19 ++ uint32_t ddr4_mode : 1; // Bits 20:20 ++ uint32_t en_vddq_odt : 1; // Bits 21:21 ++ uint32_t en_vtt_odt : 1; // Bits 22:22 ++ uint32_t en_const_z_eq_tx : 1; // Bits 23:23 ++ uint32_t tx_eq_dis : 1; // Bits 24:24 ++ uint32_t rx_vref_prog_mfc : 1; // Bits 25:25 ++ uint32_t cben : 3; // Bits 28:26 ++ uint32_t tx_deskew_disable : 1; // Bits 29:29 ++ uint32_t rx_deskew_disable : 1; // Bits 30:30 ++ uint32_t dq_slew_dly_byp : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_comp_data_comp_1_reg { ++ struct __packed { ++ uint32_t rcomp_odt_up : 6; // Bits 5:0 ++ uint32_t : 3; // Bits 8:6 ++ uint32_t rcomp_odt_down : 6; // Bits 14:9 ++ uint32_t : 1; // Bits 15:15 ++ uint32_t panic_drv_down : 6; // Bits 21:16 ++ uint32_t panic_drv_up : 6; // Bits 27:22 ++ uint32_t ls_comp : 3; // Bits 30:28 ++ uint32_t : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_comp_ctl_0_reg { ++ struct __packed { ++ uint32_t : 3; // Bits 2:0 ++ uint32_t disable_odt_static : 1; // Bits 3:3 ++ uint32_t odt_up_down_off : 6; // Bits 9:4 ++ uint32_t fixed_odt_offset : 1; // Bits 10:10 ++ int32_t dq_drv_vref : 4; // Bits 14:11 ++ int32_t dq_odt_vref : 5; // Bits 19:15 ++ int32_t cmd_drv_vref : 4; // Bits 23:20 ++ int32_t ctl_drv_vref : 4; // Bits 27:24 ++ int32_t clk_drv_vref : 4; // Bits 31:28 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_comp_ctl_1_reg { ++ struct __packed { ++ uint32_t dq_scomp : 5; // Bits 4:0 ++ uint32_t cmd_scomp : 5; // Bits 9:5 ++ uint32_t ctl_scomp : 5; // Bits 14:10 ++ uint32_t clk_scomp : 5; // Bits 19:15 ++ uint32_t tco_cmd_offset : 4; // Bits 23:20 ++ uint32_t comp_clk_on : 1; // Bits 24:24 ++ uint32_t vccddq_hi : 1; // Bits 25:25 ++ uint32_t : 3; // Bits 28:26 ++ uint32_t dis_quick_comp : 1; // Bits 29:29 ++ uint32_t sin_step : 1; // Bits 30:30 ++ uint32_t sin_step_adv : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_data_vref_adjust_reg { ++ struct __packed { ++ int32_t ca_vref_ctrl : 7;// Bits 6:0 ++ int32_t ch1_vref_ctrl : 7;// Bits 13:7 ++ int32_t ch0_vref_ctrl : 7;// Bits 20:14 ++ uint32_t en_dimm_vref_ca : 1;// Bits 21:21 ++ uint32_t en_dimm_vref_ch1 : 1;// Bits 22:22 ++ uint32_t en_dimm_vref_ch0 : 1;// Bits 23:23 ++ uint32_t hi_z_timer_ctrl : 2;// Bits 25:24 ++ uint32_t vccddq_hi_qnnn_h : 1;// Bits 26:26 ++ uint32_t : 2;// Bits 28:27 ++ uint32_t ca_slow_bw : 1;// Bits 29:29 ++ uint32_t ch0_slow_bw : 1;// Bits 30:30 ++ uint32_t ch1_slow_bw : 1;// Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_data_vref_control_reg { ++ struct __packed { ++ uint32_t hi_bw_divider : 2; // Bits 1:0 ++ uint32_t lo_bw_divider : 2; // Bits 3:2 ++ uint32_t sample_divider : 3; // Bits 6:4 ++ uint32_t open_loop : 1; // Bits 7:7 ++ uint32_t slow_bw_error : 2; // Bits 9:8 ++ uint32_t hi_bw_enable : 1; // Bits 10:10 ++ uint32_t : 1; // Bits 11:11 ++ uint32_t vt_slope_b : 3; // Bits 14:12 ++ uint32_t vt_slope_a : 3; // Bits 17:15 ++ uint32_t vt_offset : 3; // Bits 20:18 ++ uint32_t sel_code : 3; // Bits 23:21 ++ uint32_t output_code : 8; // Bits 31:24 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_comp_vsshi_reg { ++ struct __packed { ++ uint32_t panic_drv_down_vref : 6; // Bits 5:0 ++ uint32_t panic_drv_up_vref : 6; // Bits 11:6 ++ uint32_t vt_offset : 5; // Bits 16:12 ++ uint32_t vt_slope_a : 3; // Bits 19:17 ++ uint32_t vt_slope_b : 3; // Bits 22:20 ++ uint32_t : 9; // Bits 31:23 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_comp_vsshi_control_reg { ++ struct __packed { ++ uint32_t vsshi_target : 6; // Bits 5:0 ++ uint32_t hi_bw_divider : 2; // Bits 7:6 ++ uint32_t lo_bw_divider : 2; // Bits 9:8 ++ uint32_t sample_divider : 3; // Bits 12:10 ++ uint32_t open_loop : 1; // Bits 13:13 ++ uint32_t bw_error : 2; // Bits 15:14 ++ uint32_t panic_driver_en : 1; // Bits 16:16 ++ uint32_t : 1; // Bits 17:17 ++ uint32_t panic_voltage : 4; // Bits 21:18 ++ uint32_t gain_boost : 1; // Bits 22:22 ++ uint32_t sel_code : 1; // Bits 23:23 ++ uint32_t output_code : 8; // Bits 31:24 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_clk_controls_reg { ++ struct __packed { ++ uint32_t ref_pi : 4; // Bits 3:0 ++ uint32_t dll_mask : 2; // Bits 5:4 ++ uint32_t : 1; // Bits 6:6 ++ uint32_t tx_on : 1; // Bits 7:7 ++ uint32_t internal_clocks_on : 1; // Bits 8:8 ++ uint32_t repeater_clocks_on : 1; // Bits 9:9 ++ uint32_t io_lb_ctl : 2; // Bits 11:10 ++ uint32_t odt_mode : 1; // Bits 12:12 ++ uint32_t : 8; // Bits 20:13 ++ uint32_t rx_vref : 6; // Bits 26:21 ++ uint32_t vccddq_hi : 1; // Bits 27:27 ++ uint32_t dll_weaklock : 1; // Bits 28:28 ++ uint32_t lpddr_mode : 1; // Bits 29:29 ++ uint32_t : 2; // Bits 31:30 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_cmd_controls_reg { ++ struct __packed { ++ int32_t ref_pi : 4; // Bits 3:0 ++ uint32_t dll_mask : 2; // Bits 5:4 ++ uint32_t : 1; // Bits 6:6 ++ uint32_t tx_on : 1; // Bits 7:7 ++ uint32_t internal_clocks_on : 1; // Bits 8:8 ++ uint32_t repeater_clocks_on : 1; // Bits 9:9 ++ uint32_t io_lb_ctl : 2; // Bits 11:10 ++ uint32_t odt_mode : 1; // Bits 12:12 ++ uint32_t cmd_tx_eq : 2; // Bits 14:13 ++ uint32_t early_weak_drive : 2; // Bits 16:15 ++ uint32_t : 4; // Bits 20:17 ++ int32_t rx_vref : 6; // Bits 26:21 ++ uint32_t vccddq_hi : 1; // Bits 27:27 ++ uint32_t dll_weaklock : 1; // Bits 28:28 ++ uint32_t lpddr_mode : 1; // Bits 29:29 ++ uint32_t lpddr_ca_a_dis : 1; // Bits 30:30 ++ uint32_t lpddr_ca_b_dis : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++/* Same register definition for CKE and CTL fubs */ ++union ddr_cke_ctl_controls_reg { ++ struct __packed { ++ int32_t ref_pi : 4; // Bits 3:0 ++ uint32_t dll_mask : 2; // Bits 5:4 ++ uint32_t : 1; // Bits 6:6 ++ uint32_t tx_on : 1; // Bits 7:7 ++ uint32_t internal_clocks_on : 1; // Bits 8:8 ++ uint32_t repeater_clocks_on : 1; // Bits 9:9 ++ uint32_t io_lb_ctl : 2; // Bits 11:10 ++ uint32_t odt_mode : 1; // Bits 12:12 ++ uint32_t cmd_tx_eq : 2; // Bits 14:13 ++ uint32_t early_weak_drive : 2; // Bits 16:15 ++ uint32_t ctl_tx_eq : 2; // Bits 18:17 ++ uint32_t ctl_sr_drv : 2; // Bits 20:19 ++ int32_t rx_vref : 6; // Bits 26:21 ++ uint32_t vccddq_hi : 1; // Bits 27:27 ++ uint32_t dll_weaklock : 1; // Bits 28:28 ++ uint32_t lpddr_mode : 1; // Bits 29:29 ++ uint32_t la_drv_en_ovrd : 1; // Bits 30:30 ++ uint32_t lpddr_ca_a_dis : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union ddr_scram_misc_control_reg { ++ struct __packed { ++ uint32_t wl_wake_cycles : 2; // Bits 1:0 ++ uint32_t wl_sleep_cycles : 3; // Bits 4:2 ++ uint32_t force_comp_update : 1; // Bits 5:5 ++ uint32_t weaklock_latency : 4; // Bits 9:6 ++ uint32_t ddr_no_ch_interleave : 1; // Bits 10:10 ++ uint32_t lpddr_mode : 1; // Bits 11:11 ++ uint32_t cke_mapping_ch0 : 4; // Bits 15:12 ++ uint32_t cke_mapping_ch1 : 4; // Bits 19:16 ++ uint32_t : 12; // Bits 31:20 ++ }; ++ uint32_t raw; ++}; ++ ++union mcscheds_cbit_reg { ++ struct __packed { ++ uint32_t dis_opp_cas : 1; // Bits 0:0 ++ uint32_t dis_opp_is_cas : 1; // Bits 1:1 ++ uint32_t dis_opp_ras : 1; // Bits 2:2 ++ uint32_t dis_opp_is_ras : 1; // Bits 3:3 ++ uint32_t dis_1c_byp : 1; // Bits 4:4 ++ uint32_t dis_2c_byp : 1; // Bits 5:5 ++ uint32_t dis_deprd_opt : 1; // Bits 6:6 ++ uint32_t dis_pt_it : 1; // Bits 7:7 ++ uint32_t dis_prcnt_ring : 1; // Bits 8:8 ++ uint32_t dis_prcnt_sa : 1; // Bits 9:9 ++ uint32_t dis_blkr_ph : 1; // Bits 10:10 ++ uint32_t dis_blkr_pe : 1; // Bits 11:11 ++ uint32_t dis_blkr_pm : 1; // Bits 12:12 ++ uint32_t dis_odt : 1; // Bits 13:13 ++ uint32_t oe_always_off : 1; // Bits 14:14 ++ uint32_t : 1; // Bits 15:15 ++ uint32_t dis_aom : 1; // Bits 16:16 ++ uint32_t block_rpq : 1; // Bits 17:17 ++ uint32_t block_wpq : 1; // Bits 18:18 ++ uint32_t invert_align : 1; // Bits 19:19 ++ uint32_t dis_write_gap : 1; // Bits 20:20 ++ uint32_t dis_zq : 1; // Bits 21:21 ++ uint32_t dis_tt : 1; // Bits 22:22 ++ uint32_t dis_opp_ref : 1; // Bits 23:23 ++ uint32_t long_zq : 1; // Bits 24:24 ++ uint32_t dis_srx_zq : 1; // Bits 25:25 ++ uint32_t serialize_zq : 1; // Bits 26:26 ++ uint32_t zq_fast_exec : 1; // Bits 27:27 ++ uint32_t dis_drive_nop : 1; // Bits 28:28 ++ uint32_t pres_wdb_ent : 1; // Bits 29:29 ++ uint32_t dis_clk_gate : 1; // Bits 30:30 ++ uint32_t : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union mcmain_command_rate_limit_reg { ++ struct __packed { ++ uint32_t enable_cmd_limit : 1; // Bits 0:0 ++ uint32_t cmd_rate_limit : 3; // Bits 3:1 ++ uint32_t reset_on_command : 4; // Bits 7:4 ++ uint32_t reset_delay : 4; // Bits 11:8 ++ uint32_t ck_to_cke_delay : 2; // Bits 13:12 ++ uint32_t : 17; // Bits 30:14 ++ uint32_t init_mrw_2n_cs : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union mad_chnl_reg { ++ struct __packed { ++ uint32_t ch_a : 2; // Bits 1:0 ++ uint32_t ch_b : 2; // Bits 3:2 ++ uint32_t ch_c : 2; // Bits 5:4 ++ uint32_t stacked_mode : 1; // Bits 6:6 ++ uint32_t stkd_mode_bits : 3; // Bits 9:7 ++ uint32_t lpddr_mode : 1; // Bits 10:10 ++ uint32_t : 21; // Bits 31:11 ++ }; ++ uint32_t raw; ++}; ++ ++union mad_dimm_reg { ++ struct __packed { ++ uint32_t dimm_a_size : 8; // Bits 7:0 ++ uint32_t dimm_b_size : 8; // Bits 15:8 ++ uint32_t dimm_a_sel : 1; // Bits 16:16 ++ uint32_t dimm_a_ranks : 1; // Bits 17:17 ++ uint32_t dimm_b_ranks : 1; // Bits 18:18 ++ uint32_t dimm_a_width : 1; // Bits 19:19 ++ uint32_t dimm_b_width : 1; // Bits 20:20 ++ uint32_t rank_interleave : 1; // Bits 21:21 ++ uint32_t enh_interleave : 1; // Bits 22:22 ++ uint32_t : 1; // Bits 23:23 ++ uint32_t ecc_mode : 2; // Bits 25:24 ++ uint32_t hori_mode : 1; // Bits 26:26 ++ uint32_t hori_address : 3; // Bits 29:27 ++ uint32_t : 2; // Bits 31:30 ++ }; ++ uint32_t raw; ++}; ++ ++union mad_zr_reg { ++ struct __packed { ++ uint32_t : 16; // Bits 15:0 ++ uint32_t ch_b_double : 8; // Bits 23:16 ++ uint32_t ch_b_single : 8; // Bits 31:24 ++ }; ++ uint32_t raw; ++}; ++ ++/* Same definition for P_COMP, M_COMP, D_COMP */ ++union pcu_comp_reg { ++ struct __packed { ++ uint32_t comp_disable : 1; // Bits 0:0 ++ uint32_t comp_interval : 4; // Bits 4:1 ++ uint32_t : 3; // Bits 7:5 ++ uint32_t comp_force : 1; // Bits 8:8 ++ uint32_t : 23; // Bits 31:9 ++ }; ++ uint32_t raw; ++}; ++ ++#endif +diff --git a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c +new file mode 100644 +index 0000000000..a9d960f31b +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c +@@ -0,0 +1,13 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include "raminit_native.h" ++ ++void configure_timings(struct sysinfo *ctrl) ++{ ++ /** TODO: Stub **/ ++} ++ ++void configure_refresh(struct sysinfo *ctrl) ++{ ++ /** TODO: Stub **/ ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 45f8174995..4c3f399b5d 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -7,9 +7,98 @@ + #define NUM_CHANNELS 2 + #define NUM_SLOTS 2 + ++/* Indexed register helper macros */ ++#define _DDRIO_C_R_B(r, ch, rank, byte) ((r) + 0x100 * (ch) + 0x4 * (rank) + 0x200 * (byte)) ++#define _MCMAIN_C_X(r, ch, x) ((r) + 0x400 * (ch) + 0x4 * (x)) ++#define _MCMAIN_C(r, ch) ((r) + 0x400 * (ch)) ++ + /* Register definitions */ ++ ++/* DDR DATA per-channel per-bytelane */ ++#define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) ++ ++/* DDR CKE per-channel */ ++#define DDR_CKE_ch_CMD_COMP_OFFSET(ch) _DDRIO_C_R_B(0x1204, ch, 0, 0) ++#define DDR_CKE_ch_CMD_PI_CODING(ch) _DDRIO_C_R_B(0x1208, ch, 0, 0) ++ ++#define DDR_CKE_ch_CTL_CONTROLS(ch) _DDRIO_C_R_B(0x121c, ch, 0, 0) ++#define DDR_CKE_ch_CTL_RANKS_USED(ch) _DDRIO_C_R_B(0x1220, ch, 0, 0) ++ ++/* DDR CTL per-channel */ ++#define DDR_CTL_ch_CTL_CONTROLS(ch) _DDRIO_C_R_B(0x1c1c, ch, 0, 0) ++#define DDR_CTL_ch_CTL_RANKS_USED(ch) _DDRIO_C_R_B(0x1c20, ch, 0, 0) ++ ++/* DDR CLK per-channel */ ++#define DDR_CLK_ch_RANKS_USED(ch) _DDRIO_C_R_B(0x1800, ch, 0, 0) ++#define DDR_CLK_ch_COMP_OFFSET(ch) _DDRIO_C_R_B(0x1808, ch, 0, 0) ++#define DDR_CLK_ch_PI_CODING(ch) _DDRIO_C_R_B(0x180c, ch, 0, 0) ++#define DDR_CLK_ch_CONTROLS(ch) _DDRIO_C_R_B(0x1810, ch, 0, 0) ++ ++/* DDR Scrambler */ ++#define DDR_SCRAMBLE_ch(ch) (0x2000 + 4 * (ch)) ++#define DDR_SCRAM_MISC_CONTROL 0x2008 ++ ++/* DDR CMDN/CMDS per-channel (writes go to both CMDN and CMDS fubs) */ ++#define DDR_CMD_ch_COMP_OFFSET(ch) _DDRIO_C_R_B(0x3204, ch, 0, 0) ++#define DDR_CMD_ch_PI_CODING(ch) _DDRIO_C_R_B(0x3208, ch, 0, 0) ++#define DDR_CMD_ch_CONTROLS(ch) _DDRIO_C_R_B(0x320c, ch, 0, 0) ++ ++/* DDR CKE/CTL per-channel (writes go to both CKE and CTL fubs) */ ++#define DDR_CKE_CTL_ch_CTL_COMP_OFFSET(ch) _DDRIO_C_R_B(0x3414, ch, 0, 0) ++#define DDR_CKE_CTL_ch_CTL_PI_CODING(ch) _DDRIO_C_R_B(0x3418, ch, 0, 0) ++ ++/* DDR DATA broadcast */ ++#define DDR_DATA_RX_TRAIN_RANK(rank) _DDRIO_C_R_B(0x3600, 0, rank, 0) ++#define DDR_DATA_RX_PER_BIT_RANK(rank) _DDRIO_C_R_B(0x3610, 0, rank, 0) ++#define DDR_DATA_TX_TRAIN_RANK(rank) _DDRIO_C_R_B(0x3620, 0, rank, 0) ++#define DDR_DATA_TX_PER_BIT_RANK(rank) _DDRIO_C_R_B(0x3630, 0, rank, 0) ++ ++#define DDR_DATA_RCOMP_DATA_1 0x3644 ++#define DDR_DATA_TX_XTALK 0x3648 ++#define DDR_DATA_RX_OFFSET_VDQ 0x364c ++#define DDR_DATA_OFFSET_COMP 0x365c ++#define DDR_DATA_CONTROL_1 0x3660 ++ ++#define DDR_DATA_OFFSET_TRAIN 0x3670 ++#define DDR_DATA_CONTROL_0 0x3674 ++#define DDR_DATA_VREF_ADJUST 0x3678 ++ ++/* DDR CMD broadcast */ ++#define DDR_CMD_COMP 0x3700 ++ ++/* DDR CKE/CTL broadcast */ ++#define DDR_CKE_CTL_COMP 0x3810 ++ ++/* DDR CLK broadcast */ ++#define DDR_CLK_COMP 0x3904 ++#define DDR_CLK_CONTROLS 0x3910 ++#define DDR_CLK_CB_STATUS 0x3918 ++ ++/* DDR COMP (global) */ ++#define DDR_COMP_DATA_COMP_1 0x3a04 ++#define DDR_COMP_CMD_COMP 0x3a08 ++#define DDR_COMP_CTL_COMP 0x3a0c ++#define DDR_COMP_CLK_COMP 0x3a10 ++#define DDR_COMP_CTL_0 0x3a14 ++#define DDR_COMP_CTL_1 0x3a18 ++#define DDR_COMP_VSSHI 0x3a1c ++#define DDR_COMP_OVERRIDE 0x3a20 ++#define DDR_COMP_VSSHI_CONTROL 0x3a24 ++ ++/* MCMAIN per-channel */ ++#define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch) ++ ++#define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) ++ ++/* MCMAIN broadcast */ ++#define MCSCHEDS_CBIT 0x4c20 ++ ++#define MCMNTS_SC_WDBWM 0x4f8c ++ ++/* MCDECS */ + #define MAD_CHNL 0x5000 /* Address Decoder Channel Configuration */ + #define MAD_DIMM(ch) (0x5004 + (ch) * 4) ++#define MAD_ZR 0x5014 + #define MC_INIT_STATE_G 0x5030 + #define MRC_REVISION 0x5034 /* MRC Revision */ + +@@ -28,6 +117,8 @@ + + #define PCU_DDR_PTM_CTL 0x5880 + ++#define PCU_DDR_VOLTAGE 0x58a4 ++ + /* Some power MSRs are also represented in MCHBAR */ + #define MCH_PKG_POWER_LIMIT_LO 0x59a0 + #define MCH_PKG_POWER_LIMIT_HI 0x59a4 +@@ -48,6 +139,8 @@ + #define MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL 0x909 + #define MAILBOX_BIOS_CMD_READ_PCH_POWER 0xa + #define MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT 0xb ++#define MAILBOX_BIOS_CMD_READ_DDR_2X_REFRESH 0x17 ++#define MAILBOX_BIOS_CMD_WRITE_DDR_2X_REFRESH 0x18 + #define MAILBOX_BIOS_CMD_READ_C9C10_VOLTAGE 0x26 + #define MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE 0x27 + +@@ -66,6 +159,7 @@ + #define MC_BIOS_REQ 0x5e00 /* Memory frequency request register */ + #define MC_BIOS_DATA 0x5e04 /* Miscellaneous information for BIOS */ + #define SAPMCTL 0x5f00 ++#define M_COMP 0x5f08 + + #define HDAUDRID 0x6008 + #define UMAGFXCTL 0x6020 +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0032-use-mirrorservice.org-for-gcc-downloads.patch b/config/coreboot/default/patches/0032-use-mirrorservice.org-for-gcc-downloads.patch deleted file mode 100644 index 4fb0f8a0..00000000 --- a/config/coreboot/default/patches/0032-use-mirrorservice.org-for-gcc-downloads.patch +++ /dev/null @@ -1,36 +0,0 @@ -From b769a682016b7d231bb3d004698c8a2059bbf363 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sun, 5 Nov 2023 22:57:08 +0000 -Subject: [PATCH 32/65] use mirrorservice.org for gcc downloads - -the gnu.org 302 redirect often fails - -Signed-off-by: Leah Rowe ---- - util/crossgcc/buildgcc | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - -diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc -index 5faff337b4..2743f96903 100755 ---- a/util/crossgcc/buildgcc -+++ b/util/crossgcc/buildgcc -@@ -69,11 +69,11 @@ NASM_ARCHIVE="nasm-${NASM_VERSION}.tar.bz2" - # to the jenkins build as well, or the builder won't download it. - - # GCC toolchain archive locations --GMP_BASE_URL="https://ftpmirror.gnu.org/gmp" --MPFR_BASE_URL="https://ftpmirror.gnu.org/mpfr" --MPC_BASE_URL="https://ftpmirror.gnu.org/mpc" --GCC_BASE_URL="https://ftpmirror.gnu.org/gcc/gcc-${GCC_VERSION}" --BINUTILS_BASE_URL="https://ftpmirror.gnu.org/binutils" -+GMP_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gmp" -+MPFR_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpfr" -+MPC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpc" -+GCC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}" -+BINUTILS_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/binutils" - IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica" - # CLANG toolchain archive locations - LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}" --- -2.39.5 - diff --git a/config/coreboot/default/patches/0033-haswell-NRI-Add-timings-refresh-programming.patch b/config/coreboot/default/patches/0033-haswell-NRI-Add-timings-refresh-programming.patch new file mode 100644 index 00000000..3ec3b57b --- /dev/null +++ b/config/coreboot/default/patches/0033-haswell-NRI-Add-timings-refresh-programming.patch @@ -0,0 +1,541 @@ +From 8f94c0428eea2145a97de943b093dee29001c4f9 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sat, 7 May 2022 20:59:58 +0200 +Subject: [PATCH 33/51] haswell NRI: Add timings/refresh programming + +Program the registers with timing and refresh parameters. + +Change-Id: Id2ea339d2c9ea8b56c71d6e88ec76949653ff5c2 +Signed-off-by: Angel Pons +--- + .../haswell/native_raminit/lookup_timings.c | 102 ++++++++ + .../haswell/native_raminit/raminit_native.h | 14 ++ + .../haswell/native_raminit/reg_structs.h | 93 +++++++ + .../haswell/native_raminit/timings_refresh.c | 233 +++++++++++++++++- + .../intel/haswell/registers/mchbar.h | 12 + + 5 files changed, 452 insertions(+), 2 deletions(-) + +diff --git a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c +index 8b81c7c341..b8d6c1ef40 100644 +--- a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c ++++ b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c +@@ -60,3 +60,105 @@ uint32_t get_tXP(const uint32_t mem_clock_mhz) + }; + return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); + } ++ ++static uint32_t get_lpddr_tCKE(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 533, 4 }, ++ { 666, 5 }, ++ { fmax, 6 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} ++ ++static uint32_t get_ddr_tCKE(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 533, 3 }, ++ { 800, 4 }, ++ { 933, 5 }, ++ { 1200, 6 }, ++ { fmax, 7 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} ++ ++uint32_t get_tCKE(const uint32_t mem_clock_mhz, const bool lpddr) ++{ ++ return lpddr ? get_lpddr_tCKE(mem_clock_mhz) : get_ddr_tCKE(mem_clock_mhz); ++} ++ ++uint32_t get_tXPDLL(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 400, 10 }, ++ { 533, 13 }, ++ { 666, 16 }, ++ { 800, 20 }, ++ { 933, 23 }, ++ { 1066, 26 }, ++ { 1200, 29 }, ++ { fmax, 32 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} ++ ++uint32_t get_tAONPD(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 400, 4 }, ++ { 533, 5 }, ++ { 666, 6 }, ++ { 800, 7 }, /* SNB had 8 */ ++ { 933, 8 }, ++ { 1066, 10 }, ++ { 1200, 11 }, ++ { fmax, 12 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} ++ ++uint32_t get_tMOD(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 800, 12 }, ++ { 933, 14 }, ++ { 1066, 16 }, ++ { 1200, 18 }, ++ { fmax, 20 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} ++ ++uint32_t get_tXS_offset(const uint32_t mem_clock_mhz) ++{ ++ return DIV_ROUND_UP(mem_clock_mhz, 100); ++} ++ ++static uint32_t get_lpddr_tZQOPER(const uint32_t mem_clock_mhz) ++{ ++ return (mem_clock_mhz * 360) / 1000; ++} ++ ++static uint32_t get_ddr_tZQOPER(const uint32_t mem_clock_mhz) ++{ ++ const struct timing_lookup lut[] = { ++ { 800, 256 }, ++ { 933, 299 }, ++ { 1066, 342 }, ++ { 1200, 384 }, ++ { fmax, 427 }, ++ }; ++ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); ++} ++ ++/* tZQOPER defines the period required for ZQCL after SR exit */ ++uint32_t get_tZQOPER(const uint32_t mem_clock_mhz, const bool lpddr) ++{ ++ return lpddr ? get_lpddr_tZQOPER(mem_clock_mhz) : get_ddr_tZQOPER(mem_clock_mhz); ++} ++ ++uint32_t get_tZQCS(const uint32_t mem_clock_mhz, const bool lpddr) ++{ ++ return DIV_ROUND_UP(get_tZQOPER(mem_clock_mhz, lpddr), 4); ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index fffa6d5450..5915a2bab0 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -156,6 +156,12 @@ struct sysinfo { + uint8_t cke_cmd_pi_code[NUM_CHANNELS][NUM_GROUPS]; + uint8_t cmd_north_pi_code[NUM_CHANNELS][NUM_GROUPS]; + uint8_t cmd_south_pi_code[NUM_CHANNELS][NUM_GROUPS]; ++ ++ union tc_bank_reg tc_bank[NUM_CHANNELS]; ++ union tc_bank_rank_a_reg tc_bankrank_a[NUM_CHANNELS]; ++ union tc_bank_rank_b_reg tc_bankrank_b[NUM_CHANNELS]; ++ union tc_bank_rank_c_reg tc_bankrank_c[NUM_CHANNELS]; ++ union tc_bank_rank_d_reg tc_bankrank_d[NUM_CHANNELS]; + }; + + static inline bool is_hsw_ult(void) +@@ -201,6 +207,14 @@ enum raminit_status configure_mc(struct sysinfo *ctrl); + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); + ++uint32_t get_tCKE(uint32_t mem_clock_mhz, bool lpddr); ++uint32_t get_tXPDLL(uint32_t mem_clock_mhz); ++uint32_t get_tAONPD(uint32_t mem_clock_mhz); ++uint32_t get_tMOD(uint32_t mem_clock_mhz); ++uint32_t get_tXS_offset(uint32_t mem_clock_mhz); ++uint32_t get_tZQOPER(uint32_t mem_clock_mhz, bool lpddr); ++uint32_t get_tZQCS(uint32_t mem_clock_mhz, bool lpddr); ++ + enum raminit_status wait_for_first_rcomp(void); + + uint8_t get_rx_bias(const struct sysinfo *ctrl); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +index d11cda4b3d..70487e1640 100644 +--- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -335,6 +335,99 @@ union mcscheds_cbit_reg { + uint32_t raw; + }; + ++union tc_bank_reg { ++ struct __packed { ++ uint32_t tRCD : 5; // Bits 4:0 ++ uint32_t tRP : 5; // Bits 9:5 ++ uint32_t tRAS : 6; // Bits 15:10 ++ uint32_t tRDPRE : 4; // Bits 19:16 ++ uint32_t tWRPRE : 6; // Bits 25:20 ++ uint32_t tRRD : 4; // Bits 29:26 ++ uint32_t tRPab_ext : 2; // Bits 31:30 ++ }; ++ uint32_t raw; ++}; ++ ++union tc_bank_rank_a_reg { ++ struct __packed { ++ uint32_t tCKE : 4; // Bits 3:0 ++ uint32_t tFAW : 8; // Bits 11:4 ++ uint32_t tRDRD_sr : 3; // Bits 14:12 ++ uint32_t tRDRD_dr : 4; // Bits 18:15 ++ uint32_t tRDRD_dd : 4; // Bits 22:19 ++ uint32_t tRDPDEN : 5; // Bits 27:23 ++ uint32_t : 1; // Bits 28:28 ++ uint32_t cmd_3st_dis : 1; // Bits 29:29 ++ uint32_t cmd_stretch : 2; // Bits 31:30 ++ }; ++ uint32_t raw; ++}; ++ ++union tc_bank_rank_b_reg { ++ struct __packed { ++ uint32_t tWRRD_sr : 6; // Bits 5:0 ++ uint32_t tWRRD_dr : 4; // Bits 9:6 ++ uint32_t tWRRD_dd : 4; // Bits 13:10 ++ uint32_t tWRWR_sr : 3; // Bits 16:14 ++ uint32_t tWRWR_dr : 4; // Bits 20:17 ++ uint32_t tWRWR_dd : 4; // Bits 24:21 ++ uint32_t tWRPDEN : 6; // Bits 30:25 ++ uint32_t dec_wrd : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union tc_bank_rank_c_reg { ++ struct __packed { ++ uint32_t tXPDLL : 6; // Bits 5:0 ++ uint32_t tXP : 4; // Bits 9:6 ++ uint32_t tAONPD : 4; // Bits 13:10 ++ uint32_t tRDWR_sr : 5; // Bits 18:14 ++ uint32_t tRDWR_dr : 5; // Bits 23:19 ++ uint32_t tRDWR_dd : 5; // Bits 28:24 ++ uint32_t : 3; // Bits 31:29 ++ }; ++ uint32_t raw; ++}; ++ ++/* NOTE: Non-ULT only implements the lower 21 bits (odt_write_delay is 2 bits) */ ++union tc_bank_rank_d_reg { ++ struct __packed { ++ uint32_t tAA : 5; // Bits 4:0 ++ uint32_t tCWL : 5; // Bits 9:5 ++ uint32_t tCPDED : 2; // Bits 11:10 ++ uint32_t tPRPDEN : 2; // Bits 13:12 ++ uint32_t odt_read_delay : 3; // Bits 16:14 ++ uint32_t odt_read_duration : 2; // Bits 18:17 ++ uint32_t odt_write_duration : 3; // Bits 21:19 ++ uint32_t odt_write_delay : 3; // Bits 24:22 ++ uint32_t odt_always_rank_0 : 1; // Bits 25:25 ++ uint32_t cmd_delay : 2; // Bits 27:26 ++ uint32_t : 4; // Bits 31:28 ++ }; ++ uint32_t raw; ++}; ++ ++union tc_rftp_reg { ++ struct __packed { ++ uint32_t tREFI : 16; // Bits 15:0 ++ uint32_t tRFC : 9; // Bits 24:16 ++ uint32_t tREFIx9 : 7; // Bits 31:25 ++ }; ++ uint32_t raw; ++}; ++ ++union tc_srftp_reg { ++ struct __packed { ++ uint32_t tXSDLL : 12; // Bits 11:0 ++ uint32_t tXS_offset : 4; // Bits 15:12 ++ uint32_t tZQOPER : 10; // Bits 25:16 ++ uint32_t : 2; // Bits 27:26 ++ uint32_t tMOD : 4; // Bits 31:28 ++ }; ++ uint32_t raw; ++}; ++ + union mcmain_command_rate_limit_reg { + struct __packed { + uint32_t enable_cmd_limit : 1; // Bits 0:0 +diff --git a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c +index a9d960f31b..54fee0121d 100644 +--- a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c ++++ b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c +@@ -1,13 +1,242 @@ + /* SPDX-License-Identifier: GPL-2.0-or-later */ + ++#include ++#include ++#include ++#include ++#include ++#include ++ + #include "raminit_native.h" + ++#define BL 8 /* Burst length */ ++#define tCCD 4 ++#define tRPRE 1 ++#define tWPRE 1 ++#define tDLLK 512 ++ ++static bool is_sodimm(const enum spd_dimm_type_ddr3 type) ++{ ++ return type == SPD_DDR3_DIMM_TYPE_SO_DIMM || type == SPD_DDR3_DIMM_TYPE_72B_SO_UDIMM; ++} ++ ++static uint8_t get_odt_stretch(const struct sysinfo *const ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ /* Only stretch with 2 DIMMs per channel */ ++ if (ctrl->dpc[channel] != 2) ++ continue; ++ ++ const struct raminit_dimm_info *dimms = ctrl->dimms[channel]; ++ ++ /* Only stretch when using SO-DIMMs */ ++ if (!is_sodimm(dimms[0].data.dimm_type) || !is_sodimm(dimms[1].data.dimm_type)) ++ continue; ++ ++ /* Only stretch with mismatched card types */ ++ if (dimms[0].data.reference_card == dimms[1].data.reference_card) ++ continue; ++ ++ /* Stretch if one SO-DIMM is card F */ ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { ++ if (dimms[slot].data.reference_card == 5) ++ return 1; ++ } ++ } ++ return 0; ++} ++ ++static union tc_bank_reg make_tc_bank(struct sysinfo *const ctrl) ++{ ++ return (union tc_bank_reg) { ++ .tRCD = ctrl->tRCD, ++ .tRP = ctrl->tRP, ++ .tRAS = ctrl->tRAS, ++ .tRDPRE = ctrl->tRTP, ++ .tWRPRE = 4 + ctrl->tCWL + ctrl->tWR, ++ .tRRD = ctrl->tRRD, ++ .tRPab_ext = 0, /** TODO: For LPDDR, this is ctrl->tRPab - ctrl->tRP **/ ++ }; ++} ++ ++static union tc_bank_rank_a_reg make_tc_bankrank_a(struct sysinfo *ctrl, uint8_t odt_stretch) ++{ ++ /* Use 3N mode for DDR during training, but always use 1N mode for LPDDR */ ++ const uint32_t tCMD = ctrl->lpddr ? 0 : 3; ++ const uint32_t tRDRD_drdd = BL / 2 + 1 + tRPRE + odt_stretch + !!ctrl->lpddr; ++ ++ return (union tc_bank_rank_a_reg) { ++ .tCKE = get_tCKE(ctrl->mem_clock_mhz, ctrl->lpddr), ++ .tFAW = ctrl->tFAW, ++ .tRDRD_sr = tCCD, ++ .tRDRD_dr = tRDRD_drdd, ++ .tRDRD_dd = tRDRD_drdd, ++ .tRDPDEN = ctrl->tAA + BL / 2 + 1, ++ .cmd_3st_dis = 1, /* Disable command tri-state before training */ ++ .cmd_stretch = tCMD, ++ }; ++} ++ ++static union tc_bank_rank_b_reg make_tc_bankrank_b(struct sysinfo *const ctrl) ++{ ++ const uint8_t tWRRD_drdd = ctrl->tCWL - ctrl->tAA + BL / 2 + 2 + tRPRE; ++ const uint8_t tWRWR_drdd = BL / 2 + 2 + tWPRE; ++ ++ return (union tc_bank_rank_b_reg) { ++ .tWRRD_sr = tCCD + ctrl->tCWL + ctrl->tWTR + 2, ++ .tWRRD_dr = ctrl->lpddr ? 8 : tWRRD_drdd, ++ .tWRRD_dd = ctrl->lpddr ? 8 : tWRRD_drdd, ++ .tWRWR_sr = tCCD, ++ .tWRWR_dr = tWRWR_drdd, ++ .tWRWR_dd = tWRWR_drdd, ++ .tWRPDEN = ctrl->tWR + ctrl->tCWL + BL / 2, ++ .dec_wrd = ctrl->tCWL >= 6, ++ }; ++} ++ ++static uint32_t get_tRDWR_sr(const struct sysinfo *ctrl) ++{ ++ if (ctrl->lpddr) { ++ const uint32_t tdqsck_max = DIV_ROUND_UP(5500, ctrl->qclkps * 2); ++ return ctrl->tAA - ctrl->tCWL + tCCD + tWPRE + tdqsck_max + 1; ++ } else { ++ const bool fast_clock = ctrl->mem_clock_mhz > 666; ++ return ctrl->tAA - ctrl->tCWL + tCCD + tWPRE + 2 + fast_clock; ++ } ++} ++ ++static union tc_bank_rank_c_reg make_tc_bankrank_c(struct sysinfo *ctrl, uint8_t odt_stretch) ++{ ++ const uint32_t tRDWR_sr = get_tRDWR_sr(ctrl); ++ const uint32_t tRDWR_drdd = tRDWR_sr + odt_stretch; ++ ++ return (union tc_bank_rank_c_reg) { ++ .tXPDLL = get_tXPDLL(ctrl->mem_clock_mhz), ++ .tXP = MAX(ctrl->tXP, 7), /* Use a higher tXP for training */ ++ .tAONPD = get_tAONPD(ctrl->mem_clock_mhz), ++ .tRDWR_sr = tRDWR_sr, ++ .tRDWR_dr = tRDWR_drdd, ++ .tRDWR_dd = tRDWR_drdd, ++ }; ++} ++ ++static union tc_bank_rank_d_reg make_tc_bankrank_d(struct sysinfo *ctrl, uint8_t odt_stretch) ++{ ++ const uint32_t odt_rd_delay = ctrl->tAA - ctrl->tCWL; ++ if (!ctrl->lpddr) { ++ return (union tc_bank_rank_d_reg) { ++ .tAA = ctrl->tAA, ++ .tCWL = ctrl->tCWL, ++ .tCPDED = 1, ++ .tPRPDEN = 1, ++ .odt_read_delay = odt_rd_delay, ++ .odt_read_duration = odt_stretch, ++ }; ++ } ++ ++ /* tCWL has 1 extra clock because of tDQSS, subtract it here */ ++ const uint32_t tCWL_lpddr = ctrl->tCWL - 1; ++ const uint32_t odt_wr_delay = tCWL_lpddr + DIV_ROUND_UP(3500, ctrl->qclkps * 2); ++ const uint32_t odt_wr_duration = DIV_ROUND_UP(3500 - 1750, ctrl->qclkps * 2) + 1; ++ ++ return (union tc_bank_rank_d_reg) { ++ .tAA = ctrl->tAA, ++ .tCWL = tCWL_lpddr, ++ .tCPDED = 2, /* Required by JEDEC LPDDR3 spec */ ++ .tPRPDEN = 1, ++ .odt_read_delay = odt_rd_delay, ++ .odt_read_duration = odt_stretch, ++ .odt_write_delay = odt_wr_delay, ++ .odt_write_duration = odt_wr_duration, ++ .odt_always_rank_0 = ctrl->lpddr_dram_odt ++ }; ++} ++ ++/* ZQCS period values, in (tREFI * 128) units */ ++#define ZQCS_PERIOD_DDR3 128 /* tREFI * 128 = 7.8 us * 128 = 1ms */ ++#define ZQCS_PERIOD_LPDDR3 256 /* tREFI * 128 = 3.9 us * 128 = 0.5ms */ ++ ++static uint32_t make_tc_zqcal(const struct sysinfo *const ctrl) ++{ ++ const uint32_t zqcs_period = ctrl->lpddr ? ZQCS_PERIOD_LPDDR3 : ZQCS_PERIOD_DDR3; ++ const uint32_t tZQCS = get_tZQCS(ctrl->mem_clock_mhz, ctrl->lpddr); ++ return tZQCS << (is_hsw_ult() ? 10 : 8) | zqcs_period; ++} ++ ++static union tc_rftp_reg make_tc_rftp(const struct sysinfo *const ctrl) ++{ ++ /* ++ * The tREFIx9 field should be programmed to minimum of 8.9 * tREFI (to allow ++ * for possible delays from ZQ or isoc) and tRASmax (70us) divided by 1024. ++ */ ++ return (union tc_rftp_reg) { ++ .tREFI = ctrl->tREFI, ++ .tRFC = ctrl->tRFC, ++ .tREFIx9 = ctrl->tREFI * 89 / 10240, ++ }; ++} ++ ++static union tc_srftp_reg make_tc_srftp(const struct sysinfo *const ctrl) ++{ ++ return (union tc_srftp_reg) { ++ .tXSDLL = tDLLK, ++ .tXS_offset = get_tXS_offset(ctrl->mem_clock_mhz), ++ .tZQOPER = get_tZQOPER(ctrl->mem_clock_mhz, ctrl->lpddr), ++ .tMOD = get_tMOD(ctrl->mem_clock_mhz) - 8, ++ }; ++} ++ + void configure_timings(struct sysinfo *ctrl) + { +- /** TODO: Stub **/ ++ if (ctrl->lpddr) ++ die("%s: Missing support for LPDDR\n", __func__); ++ ++ const uint8_t odt_stretch = get_odt_stretch(ctrl); ++ const union tc_bank_reg tc_bank = make_tc_bank(ctrl); ++ const union tc_bank_rank_a_reg tc_bank_rank_a = make_tc_bankrank_a(ctrl, odt_stretch); ++ const union tc_bank_rank_b_reg tc_bank_rank_b = make_tc_bankrank_b(ctrl); ++ const union tc_bank_rank_c_reg tc_bank_rank_c = make_tc_bankrank_c(ctrl, odt_stretch); ++ const union tc_bank_rank_d_reg tc_bank_rank_d = make_tc_bankrank_d(ctrl, odt_stretch); ++ ++ const uint8_t wr_delay = tc_bank_rank_b.dec_wrd + 1; ++ uint8_t sc_wr_add_delay = 0; ++ sc_wr_add_delay |= wr_delay << 0; ++ sc_wr_add_delay |= wr_delay << 2; ++ sc_wr_add_delay |= wr_delay << 4; ++ sc_wr_add_delay |= wr_delay << 6; ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ ctrl->tc_bank[channel] = tc_bank; ++ ctrl->tc_bankrank_a[channel] = tc_bank_rank_a; ++ ctrl->tc_bankrank_b[channel] = tc_bank_rank_b; ++ ctrl->tc_bankrank_c[channel] = tc_bank_rank_c; ++ ctrl->tc_bankrank_d[channel] = tc_bank_rank_d; ++ ++ mchbar_write32(TC_BANK_ch(channel), ctrl->tc_bank[channel].raw); ++ mchbar_write32(TC_BANK_RANK_A_ch(channel), ctrl->tc_bankrank_a[channel].raw); ++ mchbar_write32(TC_BANK_RANK_B_ch(channel), ctrl->tc_bankrank_b[channel].raw); ++ mchbar_write32(TC_BANK_RANK_C_ch(channel), ctrl->tc_bankrank_c[channel].raw); ++ mchbar_write32(TC_BANK_RANK_D_ch(channel), ctrl->tc_bankrank_d[channel].raw); ++ mchbar_write8(SC_WR_ADD_DELAY_ch(channel), sc_wr_add_delay); ++ } + } + + void configure_refresh(struct sysinfo *ctrl) + { +- /** TODO: Stub **/ ++ const union tc_srftp_reg tc_srftp = make_tc_srftp(ctrl); ++ const union tc_rftp_reg tc_rftp = make_tc_rftp(ctrl); ++ const uint32_t tc_zqcal = make_tc_zqcal(ctrl); ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ mchbar_setbits32(TC_RFP_ch(channel), 0xff); ++ mchbar_write32(TC_RFTP_ch(channel), tc_rftp.raw); ++ mchbar_write32(TC_SRFTP_ch(channel), tc_srftp.raw); ++ mchbar_write32(TC_ZQCAL_ch(channel), tc_zqcal); ++ } + } +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 4c3f399b5d..2acc5cbbc8 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -86,9 +86,21 @@ + #define DDR_COMP_VSSHI_CONTROL 0x3a24 + + /* MCMAIN per-channel */ ++#define TC_BANK_ch(ch) _MCMAIN_C(0x4000, ch) ++#define TC_BANK_RANK_A_ch(ch) _MCMAIN_C(0x4004, ch) ++#define TC_BANK_RANK_B_ch(ch) _MCMAIN_C(0x4008, ch) ++#define TC_BANK_RANK_C_ch(ch) _MCMAIN_C(0x400c, ch) + #define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch) ++#define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) ++#define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) + ++#define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) ++ ++#define TC_ZQCAL_ch(ch) _MCMAIN_C(0x4290, ch) ++#define TC_RFP_ch(ch) _MCMAIN_C(0x4294, ch) ++#define TC_RFTP_ch(ch) _MCMAIN_C(0x4298, ch) + #define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) ++#define TC_SRFTP_ch(ch) _MCMAIN_C(0x42a4, ch) + + /* MCMAIN broadcast */ + #define MCSCHEDS_CBIT 0x4c20 +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0033-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch b/config/coreboot/default/patches/0033-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch deleted file mode 100644 index 9b24c26e..00000000 --- a/config/coreboot/default/patches/0033-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch +++ /dev/null @@ -1,872 +0,0 @@ -From 3697d2e2df764bd2f1b05a6856e035b606f6a360 Mon Sep 17 00:00:00 2001 -From: Riku Viitanen -Date: Sat, 23 Dec 2023 19:02:10 +0200 -Subject: [PATCH 33/65] mb/hp: Add Compaq Elite 8300 CMT port - -Based on autoport and Z220 SuperIO code. - -With SeaBIOS and Nouveau on Debian, only nomodeset works with GTX 780 -(must use proprietary driver instead). - -Tested by xilynx / spot_ on #libreboot: -- i3-3220, native raminit 2x2GB, M378B5773DH0-CH9 + MT8JTF25664AZ-1G6M1 -- Celeron G1620, native raminit 1x4GB, MT8JTF51264AZ-1G6E1 -- Booting Debian with Linux 6.1.0-16-amd64 via SeaBIOS -- All SATA ports -- Audio: internal speaker, headphone and microphone plugs -- Rebooting -- S3 suspend and wake -- libgfxinit: VGA, DisplayPort -- Ethernet -- Super I/O: fan speeds stay in control -- GPU in PEG slot - -Untested: -- EHCI debugging -- Other PCI/PCIe slots -- PS/2 -- Serial, parallel ports - -Change-Id: Ie6ec60d2f4ee50d5e3fa2847c19fa4cf0ab73363 -Signed-off-by: Riku Viitanen ---- - .../hp/compaq_elite_8300_cmt/Kconfig | 39 ++++ - .../hp/compaq_elite_8300_cmt/Kconfig.name | 2 + - .../hp/compaq_elite_8300_cmt/Makefile.mk | 7 + - .../hp/compaq_elite_8300_cmt/acpi/ec.asl | 1 + - .../compaq_elite_8300_cmt/acpi/platform.asl | 10 + - .../hp/compaq_elite_8300_cmt/acpi/superio.asl | 29 +++ - .../hp/compaq_elite_8300_cmt/acpi_tables.c | 12 ++ - .../hp/compaq_elite_8300_cmt/board_info.txt | 5 + - .../hp/compaq_elite_8300_cmt/cmos.default | 7 + - .../hp/compaq_elite_8300_cmt/cmos.layout | 74 +++++++ - .../hp/compaq_elite_8300_cmt/data.vbt | Bin 0 -> 3902 bytes - .../hp/compaq_elite_8300_cmt/devicetree.cb | 177 ++++++++++++++++ - .../hp/compaq_elite_8300_cmt/dsdt.asl | 26 +++ - .../hp/compaq_elite_8300_cmt/early_init.c | 14 ++ - .../compaq_elite_8300_cmt/gma-mainboard.ads | 17 ++ - src/mainboard/hp/compaq_elite_8300_cmt/gpio.c | 191 ++++++++++++++++++ - .../hp/compaq_elite_8300_cmt/hda_verb.c | 33 +++ - .../hp/compaq_elite_8300_cmt/mainboard.c | 16 ++ - 18 files changed, 660 insertions(+) - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Kconfig - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/cmos.default - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/data.vbt - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/early_init.c - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/gpio.c - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c - create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c - -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig -new file mode 100644 -index 0000000000..d2bfd35dc4 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig -@@ -0,0 +1,39 @@ -+if BOARD_HP_COMPAQ_ELITE_8300_CMT -+ -+config BOARD_SPECIFIC_OPTIONS -+ def_bool y -+ select BOARD_ROMSIZE_KB_16384 -+ select HAVE_ACPI_RESUME -+ select HAVE_ACPI_TABLES -+ select HAVE_CMOS_DEFAULT -+ select HAVE_OPTION_TABLE -+ select INTEL_GMA_HAVE_VBT -+ select INTEL_INT15 -+ select MAINBOARD_HAS_TPM1 -+ select MAINBOARD_HAS_LIBGFXINIT -+ select MAINBOARD_USES_IFD_GBE_REGION -+ select MEMORY_MAPPED_TPM -+ select NORTHBRIDGE_INTEL_SANDYBRIDGE -+ select SERIRQ_CONTINUOUS_MODE -+ select SOUTHBRIDGE_INTEL_C216 -+ select SUPERIO_NUVOTON_NPCD378 -+ select USE_NATIVE_RAMINIT -+ -+config CBFS_SIZE -+ default 0x570000 -+ -+config MAINBOARD_DIR -+ default "hp/compaq_elite_8300_cmt" -+ -+config MAINBOARD_PART_NUMBER -+ default "HP Compaq Elite 8300 CMT" -+ -+config VGA_BIOS_ID -+ default "8086,0152" -+ -+config DRAM_RESET_GATE_GPIO -+ default 60 -+ -+config USBDEBUG_HCD_INDEX # FIXME: check this -+ default 2 -+endif -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name -new file mode 100644 -index 0000000000..bd399b1e76 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name -@@ -0,0 +1,2 @@ -+config BOARD_HP_COMPAQ_ELITE_8300_CMT -+ bool "Compaq Elite 8300 CMT" -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk b/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk -new file mode 100644 -index 0000000000..fb492d3583 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk -@@ -0,0 +1,7 @@ -+## SPDX-License-Identifier: GPL-2.0-only -+ -+bootblock-y += early_init.c -+bootblock-y += gpio.c -+romstage-y += early_init.c -+romstage-y += gpio.c -+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl -new file mode 100644 -index 0000000000..73fa78ef14 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl -@@ -0,0 +1 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl -new file mode 100644 -index 0000000000..aff432b6f4 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl -@@ -0,0 +1,10 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+Method(_WAK, 1) -+{ -+ Return(Package() {0, 0}) -+} -+ -+Method(_PTS, 1) -+{ -+} -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl -new file mode 100644 -index 0000000000..54f8e3fe95 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl -@@ -0,0 +1,29 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+/* Copied over from compaq_8200_elite_sff/acpi/superio.asl */ -+ -+#include -+ -+Scope (\_GPE) -+{ -+ Method (_L0D, 0, NotSerialized) -+ { -+ Notify (\_SB.PCI0.EHC1, 0x02) -+ Notify (\_SB.PCI0.EHC2, 0x02) -+ //FIXME: Add GBE device -+ //Notify (\_SB.PCI0.GBE, 0x02) -+ } -+ -+ Method (_L09, 0, NotSerialized) -+ { -+ Notify (\_SB.PCI0.RP01, 0x02) -+ Notify (\_SB.PCI0.RP02, 0x02) -+ Notify (\_SB.PCI0.RP03, 0x02) -+ Notify (\_SB.PCI0.RP04, 0x02) -+ Notify (\_SB.PCI0.RP05, 0x02) -+ Notify (\_SB.PCI0.RP06, 0x02) -+ Notify (\_SB.PCI0.RP07, 0x02) -+ Notify (\_SB.PCI0.RP08, 0x02) -+ Notify (\_SB.PCI0.PEGP, 0x02) -+ } -+} -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c b/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c -new file mode 100644 -index 0000000000..8f4f83b826 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c -@@ -0,0 +1,12 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+ -+void mainboard_fill_gnvs(struct global_nvs *gnvs) -+{ -+ /* Temperature at which OS will shutdown */ -+ gnvs->tcrt = 100; -+ /* Temperature at which OS will throttle CPU */ -+ gnvs->tpsv = 90; -+} -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt b/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt -new file mode 100644 -index 0000000000..16c29e82d8 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt -@@ -0,0 +1,5 @@ -+Category: desktop -+ROM protocol: SPI -+ROM socketed: n -+Flashrom support: y -+Release year: 2012 -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default -new file mode 100644 -index 0000000000..6d27a79c66 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default -@@ -0,0 +1,7 @@ -+boot_option=Fallback -+debug_level=Debug -+power_on_after_fail=Enable -+nmi=Enable -+sata_mode=AHCI -+gfx_uma_size=32M -+psu_fan_lvl=3 -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout -new file mode 100644 -index 0000000000..1fc83b1a55 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout -@@ -0,0 +1,74 @@ -+## SPDX-License-Identifier: GPL-2.0-only -+ -+# ----------------------------------------------------------------- -+entries -+ -+# ----------------------------------------------------------------- -+0 120 r 0 reserved_memory -+ -+# ----------------------------------------------------------------- -+# RTC_BOOT_BYTE (coreboot hardcoded) -+384 1 e 4 boot_option -+388 4 h 0 reboot_counter -+ -+# ----------------------------------------------------------------- -+# coreboot config options: console -+395 4 e 6 debug_level -+400 3 h 0 psu_fan_lvl -+ -+# coreboot config options: southbridge -+408 1 e 1 nmi -+409 2 e 7 power_on_after_fail -+ -+421 1 e 9 sata_mode -+ -+# coreboot config options: northbridge -+432 3 e 11 gfx_uma_size -+ -+448 128 r 0 vbnv -+ -+# SandyBridge MRC Scrambler Seed values -+896 32 r 0 mrc_scrambler_seed -+928 32 r 0 mrc_scrambler_seed_s3 -+960 16 r 0 mrc_scrambler_seed_chk -+ -+# coreboot config options: check sums -+984 16 h 0 check_sum -+ -+# ----------------------------------------------------------------- -+ -+enumerations -+ -+#ID value text -+1 0 Disable -+1 1 Enable -+2 0 Enable -+2 1 Disable -+4 0 Fallback -+4 1 Normal -+6 0 Emergency -+6 1 Alert -+6 2 Critical -+6 3 Error -+6 4 Warning -+6 5 Notice -+6 6 Info -+6 7 Debug -+6 8 Spew -+7 0 Disable -+7 1 Enable -+7 2 Keep -+9 0 AHCI -+9 1 IDE -+11 0 32M -+11 1 64M -+11 2 96M -+11 3 128M -+11 4 160M -+11 5 192M -+11 6 224M -+ -+# ----------------------------------------------------------------- -+checksums -+ -+checksum 392 415 984 -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/data.vbt b/src/mainboard/hp/compaq_elite_8300_cmt/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..ba627e152b65d779a80529d3811ec4d21c1b1e54 -GIT binary patch -literal 3902 -zcmdT{U2GIp6h5;vvp;uc+U>N$b}h{<64)*MnJ%?9P1V_-)?HZIZFkwM#K;zQp(Lf0 -zb69XhyYd$H6Fo9yU(vE~()R;1j?k!Dq(D1|r9o2pI)6wGoV(Cz^&><0>;1cWR7zP*~YL5XE -z{3`?=k6Yy2an&85Zl2-7jM~D`7^g}MH^6WOPE9askfBLVUBl5fj(Wi%F%Ax(<(|k= -zUH4c9hXO|5?0UW22lb}G1;Fb@mzSZ8u5fTU59si@;V}EXTQ}(rl%Wn?F&a92X)&+> -zPTj@>Ls7r4(ffK2={zn6t_hS-cTaC$zZ!`R#y2KYqnT`O>nqx^H{P7_!|gKQVi}A& -z)G!L9*Z>@59dMlOh4owoes{Vd$kl1)tt1cJZseb2!YSsO`J_8jQ^hAhROmRyl4au@8tDixs`{k^Dwd%=Z -zH-yjQdy~%q^YKYth;}v$r!Z-pnAN<1I)+#R``=|huU|*W1ew~tpBFsG0q;_jCFT6Ulxt*TNv8# -z2{`>`$JM`Jd{F+EzpU7VIlvml?AFW1Xv$0tKyom(Ej2b-oERG0Q?%Jx8HYk6s9{*E -z_)hegWIm-8PLF`1DpU2QrTKj4;VUElwQBD4f+hZZbggj@JDLYbjpK69X2PaAVr^Xn{6e+%i&oRk>LBlzUQG|c;s(9FFjhafiyq*GToK^@07@tL{CZbd5K(*L<3rb71Ew* -zhn0l-*|a>v(n`=1+Du-&m2f&k|07qiv~u)9FuttfVcu_x;V>QXdsXjZ?db(%oNhK5 -zme#7yVBD-k)j4Zp4ohoWFJ0rv5wpCVNbYROUKoL9Ww31Rg%2ZHHV$2!ik&#T)={qH -z{mrUEty8JFXPPS;w@^`Y*;z%PU#m>bK7$Oci}}Epjc<@x;b&~*!Op}BgEe0X$iI{Gx1p1;4R>1E3jwQUCw| - -literal 0 -HcmV?d00001 - -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb -new file mode 100644 -index 0000000000..3d21739b72 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb -@@ -0,0 +1,177 @@ -+# SPDX-License-Identifier: GPL-2.0-only -+ -+chip northbridge/intel/sandybridge -+ register "gfx.use_spread_spectrum_clock" = "0" -+ register "gpu_dp_b_hotplug" = "0" -+ register "gpu_dp_c_hotplug" = "0" -+ register "gpu_dp_d_hotplug" = "0" -+ # BTX mainboard: Reversed mapping -+ register "spd_addresses" = "{0x53, 0x52, 0x51, 0x50}" -+ device domain 0 on -+ subsystemid 0x103c 0x3396 inherit -+ -+ device ref host_bridge on end # Host bridge Host bridge -+ device ref peg10 on end # PEG -+ device ref igd on end # iGPU -+ -+ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH -+ register "docking_supported" = "0" -+ register "gen1_dec" = "0x00fc0a01" -+ register "gen2_dec" = "0x00fc0801" -+ register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" -+ register "pcie_port_coalesce" = "1" -+ register "sata_interface_speed_support" = "0x3" -+ register "sata_port_map" = "0x1f" -+ register "spi_lvscc" = "0x2005" -+ register "spi_uvscc" = "0x2005" -+ register "superspeed_capable_ports" = "0x0000000f" -+ register "xhci_overcurrent_mapping" = "0x00000c03" -+ register "xhci_switchable_ports" = "0x0000000f" -+ register "usb_port_config" = "{ -+ { 1, 0, 0 }, -+ { 1, 0, 0 }, -+ { 1, 0, 1 }, -+ { 1, 0, 1 }, -+ { 1, 0, 2 }, -+ { 1, 0, 2 }, -+ { 1, 0, 3 }, -+ { 1, 0, 3 }, -+ { 1, 0, 4 }, -+ { 1, 0, 4 }, -+ { 1, 0, 6 }, -+ { 1, 0, 5 }, -+ { 1, 0, 5 }, -+ { 1, 0, 6 } -+ }" -+ -+ device ref xhci on end # USB 3.0 Controller -+ device ref mei1 off end # Management Engine Interface 1 -+ device ref mei2 off end -+ device ref me_ide_r off end -+ device ref me_kt off end -+ device ref gbe on end # Intel Gigabit Ethernet -+ device ref ehci1 on end # USB2 EHCI #1 -+ device ref ehci2 on end # USB2 EHCI #2 -+ device ref hda on end # High Definition Audio -+ device ref sata1 on end # SATA Controller 1 -+ device ref sata2 off end # SATA Controller 2 -+ device ref smbus on end # SMBus -+ -+ device ref pcie_rp1 on end -+ device ref pcie_rp2 on end -+ device ref pcie_rp3 on end -+ device ref pcie_rp4 on end -+ device ref pcie_rp5 on end -+ device ref pcie_rp6 on end -+ device ref pcie_rp7 on end -+ device ref pcie_rp8 on end -+ -+ device ref pci_bridge on end -+ device ref lpc on # LPC bridge -+ chip superio/common # copied from Z220 -+ device pnp 2e.ff on # passes SIO base addr to SSDT gen -+ chip superio/nuvoton/npcd378 -+ device pnp 2e.0 off end # Floppy -+ device pnp 2e.1 on # Parallel port -+ # global -+ -+ # serialice: Vendor writes: -+ irq 0x14 = 0x9c -+ irq 0x1c = 0xa8 -+ irq 0x1d = 0x08 -+ irq 0x22 = 0x3f -+ irq 0x1a = 0xb0 -+ # dumped from superiotool: -+ irq 0x1b = 0x1e -+ irq 0x27 = 0x08 -+ irq 0x2a = 0x20 -+ irq 0x2d = 0x01 -+ # parallel port -+ io 0x60 = 0x378 -+ irq 0x70 = 0x07 -+ drq 0x74 = 0x01 -+ end -+ device pnp 2e.2 off # COM1 -+ io 0x60 = 0x2f8 -+ irq 0x70 = 3 -+ end -+ device pnp 2e.3 on # COM2, IR -+ io 0x60 = 0x3f8 -+ irq 0x70 = 4 -+ end -+ device pnp 2e.4 on # LED control -+ io 0x60 = 0x600 -+ # IOBASE[0h] = bit0 LED red / green -+ # IOBASE[0h] = bit1-4 LED PWM duty cycle -+ # IOBASE[1h] = bit6 SWCC -+ -+ io 0x62 = 0x610 -+ # IOBASE [0h] = GPES -+ # IOBASE [1h] = GPEE -+ # IOBASE [4h:7h] = 32bit upcounter at 1Mhz -+ # IOBASE [8h:bh] = GPS -+ # IOBASE [ch:fh] = GPE -+ end -+ device pnp 2e.5 on # Mouse -+ irq 0x70 = 0xc -+ end -+ device pnp 2e.6 on # Keyboard -+ io 0x60 = 0x0060 -+ io 0x62 = 0x0064 -+ irq 0x70 = 0x01 -+ # serialice: Vendor writes: -+ drq 0xf0 = 0x40 -+ end -+ device pnp 2e.7 on # WDT ? -+ io 0x60 = 0x620 -+ end -+ device pnp 2e.8 on # HWM -+ io 0x60 = 0x800 -+ # IOBASE[0h:feh] HWM page -+ # IOBASE[ffh] bit0-bit3 page selector -+ -+ drq 0xf0 = 0x20 -+ drq 0xf1 = 0x01 -+ drq 0xf2 = 0x40 -+ drq 0xf3 = 0x01 -+ -+ drq 0xf4 = 0x66 -+ drq 0xf5 = 0x67 -+ drq 0xf6 = 0x66 -+ drq 0xf7 = 0x01 -+ end -+ device pnp 2e.f on # GPIO OD ? -+ drq 0xf1 = 0x97 -+ drq 0xf2 = 0x01 -+ drq 0xf5 = 0x08 -+ drq 0xfe = 0x80 -+ end -+ device pnp 2e.15 on # BUS ? -+ io 0x60 = 0x0680 -+ io 0x62 = 0x0690 -+ end -+ device pnp 2e.1c on # Suspend Control ? -+ io 0x60 = 0x640 -+ # writing to IOBASE[5h] -+ # 0x0: Power off -+ # 0x9: Power off and bricked until CMOS battery removed -+ end -+ device pnp 2e.1e on # GPIO ? -+ io 0x60 = 0x660 -+ drq 0xf4 = 0x01 -+ # skip the following, as it -+ # looks like remapped registers -+ #drq 0xf5 = 0x06 -+ #drq 0xf6 = 0x60 -+ #drq 0xfe = 0x03 -+ end -+ end -+ end -+ end -+ chip drivers/pc80/tpm -+ device pnp 4e.0 on end # TPM module -+ end -+ end -+ end -+ end -+end -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl b/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl -new file mode 100644 -index 0000000000..e8e2b3a3e5 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl -@@ -0,0 +1,26 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+DefinitionBlock( -+ "dsdt.aml", -+ "DSDT", -+ ACPI_DSDT_REV_2, -+ OEM_ID, -+ ACPI_TABLE_CREATOR, -+ 0x20141018 /* OEM revision */ -+) -+{ -+ #include -+ #include "acpi/platform.asl" -+ #include -+ #include -+ #include -+ #include -+ -+ Device (\_SB.PCI0) -+ { -+ #include -+ #include -+ } -+} -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c b/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c -new file mode 100644 -index 0000000000..8d10c6317c ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c -@@ -0,0 +1,14 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include -+ -+#define SERIAL_DEV PNP_DEV(0x2e, NPCD378_SP2) -+ -+void bootblock_mainboard_early_init(void) -+{ -+ if (CONFIG(CONSOLE_SERIAL)) -+ nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); -+} -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads b/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads -new file mode 100644 -index 0000000000..686f7d44db ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads -@@ -0,0 +1,17 @@ -+-- SPDX-License-Identifier: GPL-2.0-or-later -+ -+with HW.GFX.GMA; -+with HW.GFX.GMA.Display_Probing; -+ -+use HW.GFX.GMA; -+use HW.GFX.GMA.Display_Probing; -+ -+private package GMA.Mainboard is -+ -+ ports : constant Port_List := -+ (DP2, -+ HDMI2, -+ Analog, -+ others => Disabled); -+ -+end GMA.Mainboard; -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c b/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c -new file mode 100644 -index 0000000000..2ae852ae51 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c -@@ -0,0 +1,191 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_GPIO, -+ .gpio1 = GPIO_MODE_GPIO, -+ .gpio2 = GPIO_MODE_NATIVE, -+ .gpio3 = GPIO_MODE_NATIVE, -+ .gpio4 = GPIO_MODE_NATIVE, -+ .gpio5 = GPIO_MODE_NATIVE, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_GPIO, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_NATIVE, -+ .gpio15 = GPIO_MODE_GPIO, -+ .gpio16 = GPIO_MODE_GPIO, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_NATIVE, -+ .gpio19 = GPIO_MODE_NATIVE, -+ .gpio20 = GPIO_MODE_NATIVE, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_GPIO, -+ .gpio30 = GPIO_MODE_NATIVE, -+ .gpio31 = GPIO_MODE_GPIO, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio0 = GPIO_DIR_INPUT, -+ .gpio1 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio11 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio15 = GPIO_DIR_OUTPUT, -+ .gpio16 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_OUTPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_OUTPUT, -+ .gpio29 = GPIO_DIR_OUTPUT, -+ .gpio31 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+ .gpio15 = GPIO_LEVEL_LOW, -+ .gpio17 = GPIO_LEVEL_LOW, -+ .gpio28 = GPIO_LEVEL_LOW, -+ .gpio29 = GPIO_LEVEL_HIGH, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_reset = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio0 = GPIO_INVERT, -+ .gpio1 = GPIO_INVERT, -+ .gpio6 = GPIO_INVERT, -+ .gpio11 = GPIO_INVERT, -+ .gpio13 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_GPIO, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_GPIO, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_GPIO, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_NATIVE, -+ .gpio46 = GPIO_MODE_GPIO, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_NATIVE, -+ .gpio52 = GPIO_MODE_NATIVE, -+ .gpio53 = GPIO_MODE_NATIVE, -+ .gpio54 = GPIO_MODE_GPIO, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_NATIVE, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_NATIVE, -+ .gpio61 = GPIO_MODE_GPIO, -+ .gpio62 = GPIO_MODE_NATIVE, -+ .gpio63 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio32 = GPIO_DIR_INPUT, -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_INPUT, -+ .gpio35 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio43 = GPIO_DIR_INPUT, -+ .gpio46 = GPIO_DIR_INPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_INPUT, -+ .gpio54 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio61 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_reset = { -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_mode = { -+ .gpio64 = GPIO_MODE_NATIVE, -+ .gpio65 = GPIO_MODE_NATIVE, -+ .gpio66 = GPIO_MODE_NATIVE, -+ .gpio67 = GPIO_MODE_NATIVE, -+ .gpio68 = GPIO_MODE_GPIO, -+ .gpio69 = GPIO_MODE_GPIO, -+ .gpio70 = GPIO_MODE_GPIO, -+ .gpio71 = GPIO_MODE_GPIO, -+ .gpio72 = GPIO_MODE_GPIO, -+ .gpio73 = GPIO_MODE_NATIVE, -+ .gpio74 = GPIO_MODE_NATIVE, -+ .gpio75 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_direction = { -+ .gpio68 = GPIO_DIR_INPUT, -+ .gpio69 = GPIO_DIR_INPUT, -+ .gpio70 = GPIO_DIR_INPUT, -+ .gpio71 = GPIO_DIR_OUTPUT, -+ .gpio72 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_level = { -+ .gpio71 = GPIO_LEVEL_LOW, -+}; -+ -+static const struct pch_gpio_set3 pch_gpio_set3_reset = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ .reset = &pch_gpio_set1_reset, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ .reset = &pch_gpio_set2_reset, -+ }, -+ .set3 = { -+ .mode = &pch_gpio_set3_mode, -+ .direction = &pch_gpio_set3_direction, -+ .level = &pch_gpio_set3_level, -+ .reset = &pch_gpio_set3_reset, -+ }, -+}; -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c b/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c -new file mode 100644 -index 0000000000..a1eafcda68 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c -@@ -0,0 +1,33 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ 0x10ec0221, /* Codec Vendor / Device ID: Realtek */ -+ 0x103c3396, /* Subsystem ID */ -+ 11, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(0, 0x103c3396), -+ AZALIA_PIN_CFG(0, 0x12, 0x411111f0), -+ AZALIA_PIN_CFG(0, 0x14, 0x01014020), -+ AZALIA_PIN_CFG(0, 0x17, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x18, 0x411111f0), -+ AZALIA_PIN_CFG(0, 0x19, 0x411111f0), -+ AZALIA_PIN_CFG(0, 0x1a, 0x02a11c3f), -+ AZALIA_PIN_CFG(0, 0x1b, 0x01813c30), -+ AZALIA_PIN_CFG(0, 0x1d, 0x415901f0), -+ AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), -+ AZALIA_PIN_CFG(0, 0x21, 0x0221102f), -+ -+ 0x80862806, /* Codec Vendor / Device ID: Intel */ -+ 0x80860101, /* Subsystem ID */ -+ 4, /* Number of 4 dword sets */ -+ AZALIA_SUBVENDOR(3, 0x80860101), -+ AZALIA_PIN_CFG(3, 0x05, 0x58560010), -+ AZALIA_PIN_CFG(3, 0x06, 0x18560020), -+ AZALIA_PIN_CFG(3, 0x07, 0x58560030), -+ -+}; -+ -+const u32 pc_beep_verbs[0] = {}; -+ -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c b/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c -new file mode 100644 -index 0000000000..8dbd95ef96 ---- /dev/null -+++ b/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c -@@ -0,0 +1,16 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+ -+static void mainboard_enable(struct device *dev) -+{ -+ install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE, -+ GMA_INT15_PANEL_FIT_DEFAULT, -+ GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -+} -+ -+struct chip_operations mainboard_ops = { -+ .enable_dev = mainboard_enable, -+}; --- -2.39.5 - diff --git a/config/coreboot/default/patches/0034-haswell-NRI-Program-memory-map.patch b/config/coreboot/default/patches/0034-haswell-NRI-Program-memory-map.patch new file mode 100644 index 00000000..bb3ed03d --- /dev/null +++ b/config/coreboot/default/patches/0034-haswell-NRI-Program-memory-map.patch @@ -0,0 +1,263 @@ +From ded914f236f76715aa43cb439a3de7df9a3dfa11 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sat, 7 May 2022 21:24:50 +0200 +Subject: [PATCH 34/51] haswell NRI: Program memory map + +This is very similar to Sandy/Ivy Bridge, except that there's several +registers to program in GDXCBAR. One of these GDXCBAR registers has a +lock bit that must be set in order for the memory controller to allow +normal access to DRAM. And it took me four months to realize this one +bit was the only reason why native raminit did not work. + +Change-Id: I3af73a018a7ba948701a542e661e7fefd57591fe +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../intel/haswell/native_raminit/memory_map.c | 183 ++++++++++++++++++ + .../haswell/native_raminit/raminit_main.c | 1 + + .../haswell/native_raminit/raminit_native.h | 1 + + .../intel/haswell/registers/host_bridge.h | 2 + + 5 files changed, 188 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/memory_map.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index fc55277a65..37d527e972 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -4,6 +4,7 @@ romstage-y += configure_mc.c + romstage-y += lookup_timings.c + romstage-y += init_mpll.c + romstage-y += io_comp_control.c ++romstage-y += memory_map.c + romstage-y += raminit_main.c + romstage-y += raminit_native.c + romstage-y += spd_bitmunching.c +diff --git a/src/northbridge/intel/haswell/native_raminit/memory_map.c b/src/northbridge/intel/haswell/native_raminit/memory_map.c +new file mode 100644 +index 0000000000..e3aded2b37 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/memory_map.c +@@ -0,0 +1,183 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++/* GDXCBAR */ ++#define MPCOHTRK_GDXC_MOT_ADDRESS_LO 0x10 ++#define MPCOHTRK_GDXC_MOT_ADDRESS_HI 0x14 ++#define MPCOHTRK_GDXC_MOT_REGION 0x18 ++ ++#define MPCOHTRK_GDXC_OCLA_ADDRESS_LO 0x20 ++#define MPCOHTRK_GDXC_OCLA_ADDRESS_HI 0x24 ++#define MPCOHTRK_GDXC_OCLA_REGION 0x28 ++ ++/* This lock bit made me lose what little sanity I had left. - Angel Pons */ ++#define MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK BIT(2) ++ ++static inline uint32_t gdxcbar_read32(const uintptr_t offset) ++{ ++ return read32p((mchbar_read32(GDXCBAR) & ~1) + offset); ++} ++ ++static inline void gdxcbar_write32(const uintptr_t offset, const uint32_t value) ++{ ++ write32p((mchbar_read32(GDXCBAR) & ~1) + offset, value); ++} ++ ++static inline void gdxcbar_clrsetbits32(const uintptr_t offset, uint32_t clear, uint32_t set) ++{ ++ const uintptr_t address = (mchbar_read32(GDXCBAR) & ~1) + offset; ++ clrsetbits32((void *)address, clear, set); ++} ++ ++#define gdxcbar_setbits32(offset, set) gdxcbar_clrsetbits32(offset, 0, set) ++#define gdxcbar_clrbits32(offset, clear) gdxcbar_clrsetbits32(offset, clear, 0) ++ ++/* All values stored in here (except the bool) are specified in MiB */ ++struct memory_map_data { ++ uint32_t dpr_size; ++ uint32_t tseg_size; ++ uint32_t gtt_size; ++ uint32_t gms_size; ++ uint32_t me_stolen_size; ++ uint32_t mmio_size; ++ uint32_t touud; ++ uint32_t remaplimit; ++ uint32_t remapbase; ++ uint32_t tom; ++ uint32_t tom_minus_me; ++ uint32_t tolud; ++ uint32_t bdsm_base; ++ uint32_t gtt_base; ++ uint32_t tseg_base; ++ bool reclaim_possible; ++}; ++ ++static void compute_memory_map(struct memory_map_data *map) ++{ ++ map->tom_minus_me = map->tom - map->me_stolen_size; ++ ++ /* ++ * MMIO size will actually be slightly smaller than computed, ++ * but matches what MRC does and is more MTRR-friendly given ++ * that TSEG is treated as WB, but SMRR makes TSEG UC anyway. ++ */ ++ const uint32_t mmio_size = MIN(map->tom_minus_me, 4096) / 2; ++ map->gtt_base = ALIGN_DOWN(mmio_size, map->tseg_size); ++ map->tseg_base = map->gtt_base - map->tseg_size; ++ map->bdsm_base = map->gtt_base + map->gtt_size; ++ map->tolud = map->bdsm_base + map->gms_size; ++ map->reclaim_possible = map->tom_minus_me > map->tolud; ++ ++ if (map->reclaim_possible) { ++ map->remapbase = MAX(4096, map->tom_minus_me); ++ map->touud = MIN(4096, map->tom_minus_me) + map->remapbase - map->tolud; ++ map->remaplimit = map->touud - 1; ++ } else { ++ map->remapbase = 0; ++ map->remaplimit = 0; ++ map->touud = map->tom_minus_me; ++ } ++} ++ ++static void display_memory_map(const struct memory_map_data *map) ++{ ++ if (!CONFIG(DEBUG_RAM_SETUP)) ++ return; ++ ++ printk(BIOS_DEBUG, "============ MEMORY MAP ============\n"); ++ printk(BIOS_DEBUG, "\n"); ++ printk(BIOS_DEBUG, "dpr_size = %u MiB\n", map->dpr_size); ++ printk(BIOS_DEBUG, "tseg_size = %u MiB\n", map->tseg_size); ++ printk(BIOS_DEBUG, "gtt_size = %u MiB\n", map->gtt_size); ++ printk(BIOS_DEBUG, "gms_size = %u MiB\n", map->gms_size); ++ printk(BIOS_DEBUG, "me_stolen_size = %u MiB\n", map->me_stolen_size); ++ printk(BIOS_DEBUG, "\n"); ++ printk(BIOS_DEBUG, "touud = %u MiB\n", map->touud); ++ printk(BIOS_DEBUG, "remaplimit = %u MiB\n", map->remaplimit); ++ printk(BIOS_DEBUG, "remapbase = %u MiB\n", map->remapbase); ++ printk(BIOS_DEBUG, "tom = %u MiB\n", map->tom); ++ printk(BIOS_DEBUG, "tom_minus_me = %u MiB\n", map->tom_minus_me); ++ printk(BIOS_DEBUG, "tolud = %u MiB\n", map->tolud); ++ printk(BIOS_DEBUG, "bdsm_base = %u MiB\n", map->bdsm_base); ++ printk(BIOS_DEBUG, "gtt_base = %u MiB\n", map->gtt_base); ++ printk(BIOS_DEBUG, "tseg_base = %u MiB\n", map->tseg_base); ++ printk(BIOS_DEBUG, "\n"); ++ printk(BIOS_DEBUG, "reclaim_possible = %s\n", map->reclaim_possible ? "Yes" : "No"); ++} ++ ++static void map_write_reg64(const uint16_t reg, const uint64_t size) ++{ ++ const uint64_t value = size << 20; ++ pci_write_config32(HOST_BRIDGE, reg + 4, value >> 32); ++ pci_write_config32(HOST_BRIDGE, reg + 0, value >> 0); ++} ++ ++static void map_write_reg32(const uint16_t reg, const uint32_t size) ++{ ++ const uint32_t value = size << 20; ++ pci_write_config32(HOST_BRIDGE, reg, value); ++} ++ ++static void program_memory_map(const struct memory_map_data *map) ++{ ++ map_write_reg64(TOUUD, map->touud); ++ map_write_reg64(TOM, map->tom); ++ if (map->reclaim_possible) { ++ map_write_reg64(REMAPBASE, map->remapbase); ++ map_write_reg64(REMAPLIMIT, map->remaplimit); ++ } ++ if (map->me_stolen_size) { ++ map_write_reg64(MESEG_LIMIT, 0x80000 - map->me_stolen_size); ++ map_write_reg64(MESEG_BASE, map->tom_minus_me); ++ pci_or_config32(HOST_BRIDGE, MESEG_LIMIT, ME_STLEN_EN); ++ } ++ map_write_reg32(TOLUD, map->tolud); ++ map_write_reg32(BDSM, map->bdsm_base); ++ map_write_reg32(BGSM, map->gtt_base); ++ map_write_reg32(TSEG, map->tseg_base); ++ ++ const uint32_t dpr_reg = map->tseg_base << 20 | map->dpr_size << 4; ++ pci_write_config32(HOST_BRIDGE, DPR, dpr_reg); ++ ++ const uint16_t gfx_stolen_size = GGC_IGD_MEM_IN_32MB_UNITS(map->gms_size / 32); ++ const uint16_t ggc = map->gtt_size << 8 | gfx_stolen_size; ++ pci_write_config16(HOST_BRIDGE, GGC, ggc); ++ ++ /** TODO: Do not hardcode these? GDXC has weird alignment requirements, though. **/ ++ gdxcbar_write32(MPCOHTRK_GDXC_MOT_ADDRESS_LO, 0); ++ gdxcbar_write32(MPCOHTRK_GDXC_MOT_ADDRESS_HI, 0); ++ gdxcbar_write32(MPCOHTRK_GDXC_MOT_REGION, 0); ++ ++ gdxcbar_write32(MPCOHTRK_GDXC_OCLA_ADDRESS_LO, 0); ++ gdxcbar_write32(MPCOHTRK_GDXC_OCLA_ADDRESS_HI, 0); ++ gdxcbar_write32(MPCOHTRK_GDXC_OCLA_REGION, 0); ++ ++ gdxcbar_setbits32(MPCOHTRK_GDXC_OCLA_ADDRESS_HI, MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK); ++} ++ ++enum raminit_status configure_memory_map(struct sysinfo *ctrl) ++{ ++ struct memory_map_data memory_map = { ++ .tom = ctrl->channel_size_mb[0] + ctrl->channel_size_mb[1], ++ .dpr_size = CONFIG_INTEL_TXT_DPR_SIZE, ++ .tseg_size = CONFIG_SMM_TSEG_SIZE >> 20, ++ .me_stolen_size = intel_early_me_uma_size(), ++ }; ++ /** FIXME: MRC hardcodes iGPU parameters, but we should not **/ ++ const bool igpu_on = pci_read_config32(HOST_BRIDGE, DEVEN) & DEVEN_D2EN; ++ if (CONFIG(ONBOARD_VGA_IS_PRIMARY) || igpu_on) { ++ memory_map.gtt_size = 2; ++ memory_map.gms_size = 64; ++ pci_or_config32(HOST_BRIDGE, DEVEN, DEVEN_D2EN); ++ } ++ compute_memory_map(&memory_map); ++ display_memory_map(&memory_map); ++ program_memory_map(&memory_map); ++ return 0; ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index fcc981ad04..559dfc3a4e 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -23,6 +23,7 @@ static const struct task_entry cold_boot[] = { + { initialise_mpll, true, "INITMPLL", }, + { convert_timings, true, "CONVTIM", }, + { configure_mc, true, "CONFMC", }, ++ { configure_memory_map, true, "MEMMAP", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 5915a2bab0..8f937c4ccd 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -203,6 +203,7 @@ enum raminit_status collect_spd_info(struct sysinfo *ctrl); + enum raminit_status initialise_mpll(struct sysinfo *ctrl); + enum raminit_status convert_timings(struct sysinfo *ctrl); + enum raminit_status configure_mc(struct sysinfo *ctrl); ++enum raminit_status configure_memory_map(struct sysinfo *ctrl); + + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); +diff --git a/src/northbridge/intel/haswell/registers/host_bridge.h b/src/northbridge/intel/haswell/registers/host_bridge.h +index 1ee0ab2890..0228cf6bb9 100644 +--- a/src/northbridge/intel/haswell/registers/host_bridge.h ++++ b/src/northbridge/intel/haswell/registers/host_bridge.h +@@ -34,6 +34,8 @@ + + #define MESEG_BASE 0x70 /* Management Engine Base */ + #define MESEG_LIMIT 0x78 /* Management Engine Limit */ ++#define MELCK (1 << 10) /* ME Range Lock */ ++#define ME_STLEN_EN (1 << 11) /* ME Stolen Memory Enable */ + + #define PAM0 0x80 + #define PAM1 0x81 +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0034-nb-intel-haswell-make-IOMMU-a-runtime-option.patch b/config/coreboot/default/patches/0034-nb-intel-haswell-make-IOMMU-a-runtime-option.patch deleted file mode 100644 index 35d0046f..00000000 --- a/config/coreboot/default/patches/0034-nb-intel-haswell-make-IOMMU-a-runtime-option.patch +++ /dev/null @@ -1,292 +0,0 @@ -From 0ad294f2da8085d5612f7940ec8601d979cb2421 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sat, 2 Mar 2024 22:51:09 +0000 -Subject: [PATCH 34/65] nb/intel/haswell: make IOMMU a runtime option - -When I tested graphics cards on a coreboot port for Dell -OptiPlex 9020 SFF, I could not use a graphics card unless -I set iommu=off on the Linux cmdline. - -Coreboot's current behaviour is to check whether the CPU -has vt-d support and, if it does, initialise the IOMMU. - -This patch maintains the current behaviour by default, but -allows the user to turn *off* the IOMMU, even if vt-d is -supported by the host CPU. - -If iommu=Disable is specified, the check will not be -performed, and the IOMMU will be left disabled. This option -has been added to all current Haswell boards, though it is -recommended to leave the IOMMU turned on in most setups. - -Signed-off-by: Leah Rowe ---- - src/mainboard/asrock/b85m_pro4/cmos.default | 1 + - src/mainboard/asrock/b85m_pro4/cmos.layout | 3 +++ - src/mainboard/asrock/h81m-hds/cmos.default | 1 + - src/mainboard/asrock/h81m-hds/cmos.layout | 6 ++++++ - src/mainboard/dell/optiplex_9020/cmos.default | 1 + - src/mainboard/dell/optiplex_9020/cmos.layout | 6 ++++++ - src/mainboard/google/beltino/cmos.layout | 5 +++++ - src/mainboard/google/slippy/cmos.layout | 5 +++++ - src/mainboard/intel/baskingridge/cmos.layout | 4 ++++ - src/mainboard/lenovo/haswell/cmos.default | 1 + - src/mainboard/lenovo/haswell/cmos.layout | 3 +++ - src/mainboard/supermicro/x10slm-f/cmos.default | 1 + - src/mainboard/supermicro/x10slm-f/cmos.layout | 6 ++++++ - src/northbridge/intel/haswell/early_init.c | 5 +++++ - 14 files changed, 48 insertions(+) - -diff --git a/src/mainboard/asrock/b85m_pro4/cmos.default b/src/mainboard/asrock/b85m_pro4/cmos.default -index 01bf20ad16..dfc8b80fb0 100644 ---- a/src/mainboard/asrock/b85m_pro4/cmos.default -+++ b/src/mainboard/asrock/b85m_pro4/cmos.default -@@ -4,3 +4,4 @@ boot_option=Fallback - debug_level=Debug - nmi=Enable - power_on_after_fail=Disable -+iommu=Enable -diff --git a/src/mainboard/asrock/b85m_pro4/cmos.layout b/src/mainboard/asrock/b85m_pro4/cmos.layout -index efdc333fc2..c9883ea71d 100644 ---- a/src/mainboard/asrock/b85m_pro4/cmos.layout -+++ b/src/mainboard/asrock/b85m_pro4/cmos.layout -@@ -11,6 +11,7 @@ - 395 4 e 4 debug_level - 408 1 e 1 nmi - 409 2 e 5 power_on_after_fail -+ 412 1 e 6 iommu - 984 16 h 0 check_sum - # ----------------------------------------------------------------- - -@@ -38,6 +39,8 @@ - 5 0 Disable - 5 1 Enable - 5 2 Keep -+ 6 0 Disable -+ 6 1 Enable - # ----------------------------------------------------------------- - - # ----------------------------------------------------------------- -diff --git a/src/mainboard/asrock/h81m-hds/cmos.default b/src/mainboard/asrock/h81m-hds/cmos.default -index 01bf20ad16..dfc8b80fb0 100644 ---- a/src/mainboard/asrock/h81m-hds/cmos.default -+++ b/src/mainboard/asrock/h81m-hds/cmos.default -@@ -4,3 +4,4 @@ boot_option=Fallback - debug_level=Debug - nmi=Enable - power_on_after_fail=Disable -+iommu=Enable -diff --git a/src/mainboard/asrock/h81m-hds/cmos.layout b/src/mainboard/asrock/h81m-hds/cmos.layout -index c9ba76c78f..95ee3d36fb 100644 ---- a/src/mainboard/asrock/h81m-hds/cmos.layout -+++ b/src/mainboard/asrock/h81m-hds/cmos.layout -@@ -21,6 +21,9 @@ entries - 408 1 e 1 nmi - 409 2 e 5 power_on_after_fail - -+# enable or disable iommu -+412 1 e 6 iommu -+ - # coreboot config options: check sums - 984 16 h 0 check_sum - -@@ -52,6 +55,9 @@ enumerations - 5 1 Enable - 5 2 Keep - -+6 0 Disable -+6 1 Enable -+ - # ----------------------------------------------------------------- - checksums - -diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default -index 6c4a2a1be7..8000eea8c0 100644 ---- a/src/mainboard/dell/optiplex_9020/cmos.default -+++ b/src/mainboard/dell/optiplex_9020/cmos.default -@@ -4,3 +4,4 @@ debug_level=Debug - nmi=Disable - power_on_after_fail=Disable - fan_full_speed=Disable -+iommu=Enable -diff --git a/src/mainboard/dell/optiplex_9020/cmos.layout b/src/mainboard/dell/optiplex_9020/cmos.layout -index d10ad95b23..4a1496a878 100644 ---- a/src/mainboard/dell/optiplex_9020/cmos.layout -+++ b/src/mainboard/dell/optiplex_9020/cmos.layout -@@ -21,6 +21,9 @@ entries - 408 1 e 1 nmi - 409 2 e 5 power_on_after_fail - -+# turn iommu on or off -+411 1 e 6 iommu -+ - # coreboot config options: EC - 412 1 e 1 fan_full_speed - -@@ -55,6 +58,9 @@ enumerations - 5 1 Enable - 5 2 Keep - -+6 0 Disable -+6 1 Enable -+ - # ----------------------------------------------------------------- - checksums - -diff --git a/src/mainboard/google/beltino/cmos.layout b/src/mainboard/google/beltino/cmos.layout -index 78d44c1415..c143979ae1 100644 ---- a/src/mainboard/google/beltino/cmos.layout -+++ b/src/mainboard/google/beltino/cmos.layout -@@ -19,6 +19,9 @@ entries - 408 1 e 1 nmi - 409 2 e 7 power_on_after_fail - -+# enable or disable iommu -+412 1 e 8 iommu -+ - # coreboot config options: bootloader - #Used by ChromeOS: - 416 128 r 0 vbnv -@@ -47,6 +50,8 @@ enumerations - 7 0 Disable - 7 1 Enable - 7 2 Keep -+8 0 Disable -+8 1 Enable - # ----------------------------------------------------------------- - checksums - -diff --git a/src/mainboard/google/slippy/cmos.layout b/src/mainboard/google/slippy/cmos.layout -index 78d44c1415..c143979ae1 100644 ---- a/src/mainboard/google/slippy/cmos.layout -+++ b/src/mainboard/google/slippy/cmos.layout -@@ -19,6 +19,9 @@ entries - 408 1 e 1 nmi - 409 2 e 7 power_on_after_fail - -+# enable or disable iommu -+412 1 e 8 iommu -+ - # coreboot config options: bootloader - #Used by ChromeOS: - 416 128 r 0 vbnv -@@ -47,6 +50,8 @@ enumerations - 7 0 Disable - 7 1 Enable - 7 2 Keep -+8 0 Disable -+8 1 Enable - # ----------------------------------------------------------------- - checksums - -diff --git a/src/mainboard/intel/baskingridge/cmos.layout b/src/mainboard/intel/baskingridge/cmos.layout -index 78d44c1415..f2c602f541 100644 ---- a/src/mainboard/intel/baskingridge/cmos.layout -+++ b/src/mainboard/intel/baskingridge/cmos.layout -@@ -19,6 +19,8 @@ entries - 408 1 e 1 nmi - 409 2 e 7 power_on_after_fail - -+412 1 e 8 iommu -+ - # coreboot config options: bootloader - #Used by ChromeOS: - 416 128 r 0 vbnv -@@ -47,6 +49,8 @@ enumerations - 7 0 Disable - 7 1 Enable - 7 2 Keep -+8 0 Disable -+8 1 Enable - # ----------------------------------------------------------------- - checksums - -diff --git a/src/mainboard/lenovo/haswell/cmos.default b/src/mainboard/lenovo/haswell/cmos.default -index 08db97c5a9..cc6b363cd9 100644 ---- a/src/mainboard/lenovo/haswell/cmos.default -+++ b/src/mainboard/lenovo/haswell/cmos.default -@@ -14,3 +14,4 @@ trackpoint=Enable - backlight=Keyboard - enable_dual_graphics=Disable - usb_always_on=Disable -+iommu=Enable -diff --git a/src/mainboard/lenovo/haswell/cmos.layout b/src/mainboard/lenovo/haswell/cmos.layout -index 27915d3ab7..59df76b64c 100644 ---- a/src/mainboard/lenovo/haswell/cmos.layout -+++ b/src/mainboard/lenovo/haswell/cmos.layout -@@ -23,6 +23,7 @@ entries - - # coreboot config options: EC - 411 1 e 8 first_battery -+413 1 e 14 iommu - 415 1 e 1 wlan - 416 1 e 1 trackpoint - 417 1 e 1 fn_ctrl_swap -@@ -72,6 +73,8 @@ enumerations - 13 0 Disable - 13 1 AC and battery - 13 2 AC only -+14 0 Disable -+14 1 Enable - - # ----------------------------------------------------------------- - checksums -diff --git a/src/mainboard/supermicro/x10slm-f/cmos.default b/src/mainboard/supermicro/x10slm-f/cmos.default -index 7ce38fb5d7..6049e7938a 100644 ---- a/src/mainboard/supermicro/x10slm-f/cmos.default -+++ b/src/mainboard/supermicro/x10slm-f/cmos.default -@@ -5,3 +5,4 @@ debug_level=Debug - nmi=Enable - power_on_after_fail=Keep - hide_ast2400=Disable -+iommu=Enable -diff --git a/src/mainboard/supermicro/x10slm-f/cmos.layout b/src/mainboard/supermicro/x10slm-f/cmos.layout -index 38ba87aa45..24d39e97ee 100644 ---- a/src/mainboard/supermicro/x10slm-f/cmos.layout -+++ b/src/mainboard/supermicro/x10slm-f/cmos.layout -@@ -21,6 +21,9 @@ entries - 408 1 e 1 nmi - 409 2 e 5 power_on_after_fail - -+# enable or disable iommu -+412 1 e 6 iommu -+ - # coreboot config options: mainboard - 416 1 e 1 hide_ast2400 - -@@ -55,6 +58,9 @@ enumerations - 5 1 Enable - 5 2 Keep - -+6 0 Disable -+6 1 Enable -+ - # ----------------------------------------------------------------- - checksums - -diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c -index e47deb5da6..1a7e0b1076 100644 ---- a/src/northbridge/intel/haswell/early_init.c -+++ b/src/northbridge/intel/haswell/early_init.c -@@ -5,6 +5,7 @@ - #include - #include - #include -+#include - - #include "haswell.h" - -@@ -157,6 +158,10 @@ static void haswell_setup_misc(void) - static void haswell_setup_iommu(void) - { - const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A); -+ u8 enable_iommu = get_uint_option("iommu", 1); -+ -+ if (!enable_iommu) -+ return; - - if (capid0_a & VTD_DISABLE) - return; --- -2.39.5 - diff --git a/config/coreboot/default/patches/0035-dell-optiplex_9020-Disable-IOMMU-by-default.patch b/config/coreboot/default/patches/0035-dell-optiplex_9020-Disable-IOMMU-by-default.patch deleted file mode 100644 index 9596d6f3..00000000 --- a/config/coreboot/default/patches/0035-dell-optiplex_9020-Disable-IOMMU-by-default.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 80d728b91ec793f584bcf045f00e5fe4bba5e4ae Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sat, 2 Mar 2024 23:00:09 +0000 -Subject: [PATCH 35/65] dell/optiplex_9020: Disable IOMMU by default - -Needed to make graphics cards work. Turning it on is -recommended if only using iGPU, otherwise leave it off -by default. The IOMMU is extremely buggy when a graphics -card is used. Leaving it off by default will ensure that -the default ROM images in Libreboot will work on any setup. - -Signed-off-by: Leah Rowe ---- - src/mainboard/dell/optiplex_9020/cmos.default | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default -index 8000eea8c0..0700f971ee 100644 ---- a/src/mainboard/dell/optiplex_9020/cmos.default -+++ b/src/mainboard/dell/optiplex_9020/cmos.default -@@ -4,4 +4,4 @@ debug_level=Debug - nmi=Disable - power_on_after_fail=Disable - fan_full_speed=Disable --iommu=Enable -+iommu=Disable --- -2.39.5 - diff --git a/config/coreboot/default/patches/0035-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch b/config/coreboot/default/patches/0035-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch new file mode 100644 index 00000000..29bdec9f --- /dev/null +++ b/config/coreboot/default/patches/0035-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch @@ -0,0 +1,1036 @@ +From db2b383a8ee5a4fc45c9ce0003ae45f25ed51f86 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sat, 7 May 2022 21:49:40 +0200 +Subject: [PATCH 35/51] haswell NRI: Add DDR3 JEDEC reset and init + +Implement JEDEC reset and init sequence for DDR3. The MRS commands are +issued through the REUT (Robust Electrical Unified Testing) hardware. + +Change-Id: I2a0c066537021b587599228086727cb1e041bff5 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 3 + + .../intel/haswell/native_raminit/ddr3.c | 217 ++++++++++++++++++ + .../haswell/native_raminit/io_comp_control.c | 19 ++ + .../haswell/native_raminit/jedec_reset.c | 120 ++++++++++ + .../haswell/native_raminit/raminit_main.c | 2 + + .../haswell/native_raminit/raminit_native.h | 99 ++++++++ + .../haswell/native_raminit/reg_structs.h | 154 +++++++++++++ + .../intel/haswell/native_raminit/reut.c | 196 ++++++++++++++++ + .../intel/haswell/registers/mchbar.h | 21 ++ + src/southbridge/intel/lynxpoint/pch.h | 2 + + 10 files changed, 833 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/ddr3.c + create mode 100644 src/northbridge/intel/haswell/native_raminit/jedec_reset.c + create mode 100644 src/northbridge/intel/haswell/native_raminit/reut.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index 37d527e972..e9212df9e6 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -1,11 +1,14 @@ + ## SPDX-License-Identifier: GPL-2.0-or-later + + romstage-y += configure_mc.c ++romstage-y += ddr3.c ++romstage-y += jedec_reset.c + romstage-y += lookup_timings.c + romstage-y += init_mpll.c + romstage-y += io_comp_control.c + romstage-y += memory_map.c + romstage-y += raminit_main.c + romstage-y += raminit_native.c ++romstage-y += reut.c + romstage-y += spd_bitmunching.c + romstage-y += timings_refresh.c +diff --git a/src/northbridge/intel/haswell/native_raminit/ddr3.c b/src/northbridge/intel/haswell/native_raminit/ddr3.c +new file mode 100644 +index 0000000000..6ddb11488b +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/ddr3.c +@@ -0,0 +1,217 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++#define DDR3_RTTNOM(a, b, c) (((a) << 9) | ((b) << 6) | ((c) << 2)) ++ ++uint16_t encode_ddr3_rttnom(const uint32_t rttnom) ++{ ++ switch (rttnom) { ++ case 0: return DDR3_RTTNOM(0, 0, 0); /* RttNom is disabled */ ++ case 20: return DDR3_RTTNOM(1, 0, 0); /* RZQ/12 */ ++ case 30: return DDR3_RTTNOM(1, 0, 1); /* RZQ/8 */ ++ case 40: return DDR3_RTTNOM(0, 1, 1); /* RZQ/6 */ ++ case 60: return DDR3_RTTNOM(0, 0, 1); /* RZQ/4 */ ++ case 120: return DDR3_RTTNOM(0, 1, 0); /* RZQ/2 */ ++ } ++ printk(BIOS_ERR, "%s: Invalid rtt_nom value %u\n", __func__, rttnom); ++ return 0; ++} ++ ++static const uint8_t jedec_wr_t[12] = { 1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0 }; ++ ++static void ddr3_program_mr0(struct sysinfo *ctrl, const uint8_t dll_reset) ++{ ++ assert(ctrl->tWR >= 5 && ctrl->tWR <= 16); ++ assert(ctrl->tAA >= 4); ++ const uint8_t jedec_cas = ctrl->tAA - 4; ++ const union { ++ struct __packed { ++ uint16_t burst_length : 2; // Bits 1:0 ++ uint16_t cas_latency_msb : 1; // Bits 2:2 ++ uint16_t read_burst_type : 1; // Bits 3:3 ++ uint16_t cas_latency_low : 3; // Bits 6:4 ++ uint16_t test_mode : 1; // Bits 7:7 ++ uint16_t dll_reset : 1; // Bits 8:8 ++ uint16_t write_recovery : 3; // Bits 11:9 ++ uint16_t precharge_pd_dll : 1; // Bits 12:12 ++ uint16_t : 3; // Bits 15:13 ++ }; ++ uint16_t raw; ++ } mr0reg = { ++ .burst_length = 0, ++ .cas_latency_msb = !!(jedec_cas & BIT(3)), ++ .read_burst_type = 0, ++ .cas_latency_low = jedec_cas & 0x7, ++ .dll_reset = 1, ++ .write_recovery = jedec_wr_t[ctrl->tWR - 5], ++ .precharge_pd_dll = 0, ++ }; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { ++ if (!rank_in_ch(ctrl, slot + slot, channel)) ++ continue; ++ ++ if (!ctrl->restore_mrs) ++ ctrl->mr0[channel][slot] = mr0reg.raw; ++ } ++ reut_issue_mrs_all(ctrl, channel, 0, ctrl->mr0[channel]); ++ } ++} ++ ++void ddr3_program_mr1(struct sysinfo *ctrl, const uint8_t wl_mode, const uint8_t q_off) ++{ ++ /* ++ * JESD79-3F (JEDEC DDR3 spec) refers to bit 0 of MR1 as 'DLL Enable'. ++ * However, its encoding is weird, and 'DLL Disable' makes more sense. ++ * ++ * Moreover, bit 5 is part of ODIC (Output Driver Impedance Control), ++ * but all encodings where MR1 bit 5 is 1 are reserved. Thus, omit it. ++ */ ++ union { ++ struct __packed { ++ uint16_t dll_disable : 1; // Bits 0:0 ++ uint16_t od_impedance_ctl : 1; // Bits 1:1 ++ uint16_t odt_rtt_nom_low : 1; // Bits 2:2 ++ uint16_t additive_latency : 2; // Bits 4:3 ++ uint16_t : 1; // Bits 5:5 ++ uint16_t odt_rtt_nom_mid : 1; // Bits 6:6 ++ uint16_t write_level_mode : 1; // Bits 7:7 ++ uint16_t : 1; // Bits 8:8 ++ uint16_t odt_rtt_nom_high : 1; // Bits 9:9 ++ uint16_t : 1; // Bits 10:10 ++ uint16_t t_dqs : 1; // Bits 11:11 ++ uint16_t q_off : 1; // Bits 12:12 ++ uint16_t : 3; // Bits 15:13 ++ }; ++ uint16_t raw; ++ } mr1reg = { ++ .dll_disable = 0, ++ .od_impedance_ctl = 1, /* RZQ/7 */ ++ .additive_latency = 0, ++ .write_level_mode = wl_mode, ++ .t_dqs = 0, ++ .q_off = q_off, ++ }; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ mr1reg.raw &= ~RTTNOM_MASK; ++ mr1reg.raw |= encode_ddr3_rttnom(ctrl->dpc[channel] == 2 ? 60 : 0); ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { ++ if (!rank_in_ch(ctrl, slot + slot, channel)) ++ continue; ++ ++ if (!ctrl->restore_mrs) ++ ctrl->mr1[channel][slot] = mr1reg.raw; ++ } ++ reut_issue_mrs_all(ctrl, channel, 1, ctrl->mr1[channel]); ++ } ++} ++ ++enum { ++ RTT_WR_OFF = 0, ++ RTT_WR_60 = 1, ++ RTT_WR_120 = 2, ++}; ++ ++static void ddr3_program_mr2(struct sysinfo *ctrl) ++{ ++ assert(ctrl->tCWL >= 5); ++ const bool dimm_srt = ctrl->flags.ext_temp_refresh && !ctrl->flags.asr; ++ ++ const union { ++ struct __packed { ++ uint16_t partial_array_sr : 3; // Bits 0:2 ++ uint16_t cas_write_latency : 3; // Bits 5:3 ++ uint16_t auto_self_refresh : 1; // Bits 6:6 ++ uint16_t self_refresh_temp : 1; // Bits 7:7 ++ uint16_t : 1; // Bits 8:8 ++ uint16_t odt_rtt_wr : 2; // Bits 10:9 ++ uint16_t : 5; // Bits 15:11 ++ }; ++ uint16_t raw; ++ } mr2reg = { ++ .partial_array_sr = 0, ++ .cas_write_latency = ctrl->tCWL - 5, ++ .auto_self_refresh = ctrl->flags.asr, ++ .self_refresh_temp = dimm_srt, ++ .odt_rtt_wr = is_hsw_ult() ? RTT_WR_120 : RTT_WR_60, ++ }; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { ++ if (!rank_in_ch(ctrl, slot + slot, channel)) ++ continue; ++ ++ if (!ctrl->restore_mrs) ++ ctrl->mr2[channel][slot] = mr2reg.raw; ++ } ++ /* MR2 shadow register is similar but not identical to MR2 */ ++ if (!ctrl->restore_mrs) { ++ union tc_mr2_shadow_reg tc_mr2_shadow = { ++ .raw = mr2reg.raw & 0x073f, ++ }; ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { ++ if (!rank_in_ch(ctrl, slot + slot, channel)) ++ continue; ++ ++ if (dimm_srt) ++ tc_mr2_shadow.srt_available |= BIT(slot); ++ ++ if (ctrl->rank_mirrored[channel] & BIT(slot + slot + 1)) ++ tc_mr2_shadow.addr_bit_swizzle |= BIT(slot); ++ } ++ mchbar_write32(TC_MR2_SHADOW_ch(channel), tc_mr2_shadow.raw); ++ } ++ reut_issue_mrs_all(ctrl, channel, 2, ctrl->mr2[channel]); ++ } ++} ++ ++static void ddr3_program_mr3(struct sysinfo *ctrl, const uint8_t mpr_mode) ++{ ++ const union { ++ struct __packed { ++ uint16_t mpr_loc : 2; // Bits 1:0 ++ uint16_t mpr_mode : 1; // Bits 2:2 ++ uint16_t : 13; // Bits 15:3 ++ }; ++ uint16_t raw; ++ } mr3reg = { ++ .mpr_loc = 0, ++ .mpr_mode = mpr_mode, ++ }; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { ++ if (!rank_in_ch(ctrl, slot + slot, channel)) ++ continue; ++ ++ if (!ctrl->restore_mrs) ++ ctrl->mr3[channel][slot] = mr3reg.raw; ++ } ++ reut_issue_mrs_all(ctrl, channel, 3, ctrl->mr3[channel]); ++ } ++} ++ ++enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl) ++{ ++ ddr3_program_mr2(ctrl); ++ ddr3_program_mr3(ctrl, 0); ++ ddr3_program_mr1(ctrl, 0, 0); ++ ddr3_program_mr0(ctrl, 1); ++ return reut_issue_zq(ctrl, ctrl->chanmap, ZQ_INIT); ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c +index d45b608dd3..8a55fd81b2 100644 +--- a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c ++++ b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c +@@ -8,6 +8,25 @@ + + #include "raminit_native.h" + ++enum raminit_status io_reset(void) ++{ ++ union mc_init_state_g_reg mc_init_state_g = { ++ .raw = mchbar_read32(MC_INIT_STATE_G), ++ }; ++ mc_init_state_g.reset_io = 1; ++ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); ++ struct stopwatch timer; ++ stopwatch_init_msecs_expire(&timer, 2000); ++ do { ++ mc_init_state_g.raw = mchbar_read32(MC_INIT_STATE_G); ++ if (mc_init_state_g.reset_io == 0) ++ return RAMINIT_STATUS_SUCCESS; ++ ++ } while (!stopwatch_expired(&timer)); ++ printk(BIOS_ERR, "Timed out waiting for DDR I/O reset to complete\n"); ++ return RAMINIT_STATUS_POLL_TIMEOUT; ++} ++ + enum raminit_status wait_for_first_rcomp(void) + { + struct stopwatch timer; +diff --git a/src/northbridge/intel/haswell/native_raminit/jedec_reset.c b/src/northbridge/intel/haswell/native_raminit/jedec_reset.c +new file mode 100644 +index 0000000000..de0f676758 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/jedec_reset.c +@@ -0,0 +1,120 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++static void assert_reset(const bool do_reset) ++{ ++ if (is_hsw_ult()) { ++ uint32_t pm_cfg2 = RCBA32(PM_CFG2); ++ if (do_reset) ++ pm_cfg2 &= ~PM_CFG2_DRAM_RESET_CTL; ++ else ++ pm_cfg2 |= PM_CFG2_DRAM_RESET_CTL; ++ RCBA32(PM_CFG2) = pm_cfg2; ++ } else { ++ union mc_init_state_g_reg mc_init_state_g = { ++ .raw = mchbar_read32(MC_INIT_STATE_G), ++ }; ++ mc_init_state_g.ddr_not_reset = !do_reset; ++ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); ++ } ++} ++ ++/* ++ * Perform JEDEC reset. ++ * ++ * If RTT_NOM is to be enabled in MR1, the ODT input signal must be ++ * statically held low in our system since RTT_NOM is always enabled. ++ */ ++static void jedec_reset(struct sysinfo *ctrl) ++{ ++ if (is_hsw_ult()) ++ assert_reset(false); ++ ++ union mc_init_state_g_reg mc_init_state_g = { ++ .ddr_not_reset = 1, ++ .safe_self_refresh = 1, ++ }; ++ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); ++ ++ union reut_misc_cke_ctrl_reg reut_misc_cke_ctrl = { ++ .cke_override = 0xf, ++ .cke_on = 0, ++ }; ++ mchbar_write32(REUT_MISC_CKE_CTRL, reut_misc_cke_ctrl.raw); ++ ++ assert_reset(true); ++ ++ /** TODO: check and switch DDR3 voltage here (mainboard-specific) **/ ++ ++ udelay(200); ++ ++ assert_reset(false); ++ ++ udelay(500); ++ ++ mc_init_state_g.dclk_enable = 1; ++ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); ++ ++ /* Delay at least 20 nanoseconds for tCKSRX */ ++ tick_delay(1); ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ reut_misc_cke_ctrl.cke_on = ctrl->rankmap[channel]; ++ mchbar_write32(REUT_ch_MISC_CKE_CTRL(channel), reut_misc_cke_ctrl.raw); ++ } ++ ++ /* ++ * Wait minimum of reset CKE exit time, tXPR. ++ * Spec says MAX(tXS, 5 tCK). 5 tCK is 10 ns. ++ */ ++ tick_delay(1); ++} ++ ++enum raminit_status do_jedec_init(struct sysinfo *ctrl) ++{ ++ /* Never do a JEDEC reset in S3 resume */ ++ if (ctrl->bootmode == BOOTMODE_S3) ++ return RAMINIT_STATUS_SUCCESS; ++ ++ enum raminit_status status = io_reset(); ++ if (status) ++ return status; ++ ++ status = wait_for_first_rcomp(); ++ if (status) ++ return status; ++ ++ /* Force ODT low (JEDEC spec) */ ++ const union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { ++ .odt_override = 0xf, ++ .odt_on = 0, ++ }; ++ mchbar_write32(REUT_MISC_ODT_CTRL, reut_misc_odt_ctrl.raw); ++ ++ /* ++ * Note: Haswell MRC does not clear ODT override for LPDDR3. However, ++ * Broadwell MRC does. Hell suspects this difference is important, as ++ * there is an erratum in the specification update for Broadwell: ++ * ++ * Erratum BDM74: LPDDR3 Memory Training May Cause Platform Boot Failure ++ */ ++ if (ctrl->lpddr) ++ die("%s: LPDDR-specific JEDEC init not implemented\n", __func__); ++ ++ jedec_reset(ctrl); ++ status = ddr3_jedec_init(ctrl); ++ if (!status) ++ ctrl->restore_mrs = true; ++ ++ /* Release ODT override */ ++ mchbar_write32(REUT_MISC_ODT_CTRL, 0); ++ return status; ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 559dfc3a4e..94b268468c 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -24,6 +24,7 @@ static const struct task_entry cold_boot[] = { + { convert_timings, true, "CONVTIM", }, + { configure_mc, true, "CONFMC", }, + { configure_memory_map, true, "MEMMAP", }, ++ { do_jedec_init, true, "JEDECINIT", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +@@ -57,6 +58,7 @@ static void initialize_ctrl(struct sysinfo *ctrl) + ctrl->stepping = get_stepping(ctrl->cpu); + ctrl->vdd_mv = is_hsw_ult() ? 1350 : 1500; /** FIXME: Hardcoded, does it matter? **/ + ctrl->dq_pins_interleaved = cfg->dq_pins_interleaved; ++ ctrl->restore_mrs = false; + ctrl->bootmode = bootmode; + } + +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 8f937c4ccd..759d755d6d 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -28,6 +28,30 @@ + /* Always use 12 legs for emphasis (not trained) */ + #define TXEQFULLDRV (3 << 4) + ++/* DDR3 mode register bits */ ++#define MR0_DLL_RESET BIT(8) ++ ++#define MR1_WL_ENABLE BIT(7) ++#define MR1_QOFF_ENABLE BIT(12) /* If set, output buffers disabled */ ++ ++#define RTTNOM_MASK (BIT(9) | BIT(6) | BIT(2)) ++ ++/* ZQ calibration types */ ++enum { ++ ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ ++ ZQ_LONG, /* DDR3: ZQCL with tZQoper, LPDDR3: ZQ Long with tZQCL */ ++ ZQ_SHORT, /* DDR3: ZQCS with tZQCS, LPDDR3: ZQ Short with tZQCS */ ++ ZQ_RESET, /* DDR3: not used, LPDDR3: ZQ Reset with tZQreset */ ++}; ++ ++/* REUT initialisation modes */ ++enum { ++ REUT_MODE_IDLE = 0, ++ REUT_MODE_TEST = 1, ++ REUT_MODE_MRS = 2, ++ REUT_MODE_NOP = 3, /* Normal operation mode */ ++}; ++ + enum command_training_iteration { + CT_ITERATION_CLOCK = 0, + CT_ITERATION_CMD_NORTH, +@@ -51,6 +75,7 @@ enum raminit_status { + RAMINIT_STATUS_UNSUPPORTED_MEMORY, + RAMINIT_STATUS_MPLL_INIT_FAILURE, + RAMINIT_STATUS_POLL_TIMEOUT, ++ RAMINIT_STATUS_REUT_ERROR, + RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ + }; + +@@ -73,6 +98,7 @@ struct sysinfo { + uint32_t cpu; /* CPUID value */ + + bool dq_pins_interleaved; ++ bool restore_mrs; + + /** TODO: ECC support untested **/ + bool is_ecc; +@@ -162,6 +188,11 @@ struct sysinfo { + union tc_bank_rank_b_reg tc_bankrank_b[NUM_CHANNELS]; + union tc_bank_rank_c_reg tc_bankrank_c[NUM_CHANNELS]; + union tc_bank_rank_d_reg tc_bankrank_d[NUM_CHANNELS]; ++ ++ uint16_t mr0[NUM_CHANNELS][NUM_SLOTS]; ++ uint16_t mr1[NUM_CHANNELS][NUM_SLOTS]; ++ uint16_t mr2[NUM_CHANNELS][NUM_SLOTS]; ++ uint16_t mr3[NUM_CHANNELS][NUM_SLOTS]; + }; + + static inline bool is_hsw_ult(void) +@@ -197,6 +228,53 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl) + memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); + } + ++/* Number of ticks to wait in units of 69.841279 ns (citation needed) */ ++static inline void tick_delay(const uint32_t delay) ++{ ++ /* Just perform reads to a random register */ ++ for (uint32_t start = 0; start <= delay; start++) ++ mchbar_read32(REUT_ERR_DATA_STATUS); ++} ++ ++/* ++ * 64-bit MCHBAR registers need to be accessed atomically. If one uses ++ * two 32-bit ops instead, there will be problems with the REUT's CADB ++ * (Command Address Data Buffer): hardware automatically advances the ++ * pointer into the register file after a write to the input register. ++ */ ++static inline uint64_t mchbar_read64(const uintptr_t x) ++{ ++ const uint64_t *offset = (uint64_t *)(CONFIG_FIXED_MCHBAR_MMIO_BASE + x); ++ uint64_t mmxsave, v; ++ asm volatile ( ++ "\n\t movq %%mm0, %0" ++ "\n\t movq %2, %%mm0" ++ "\n\t movq %%mm0, %1" ++ "\n\t movq %3, %%mm0" ++ "\n\t emms" ++ : "=m"(mmxsave), ++ "=m"(v) ++ : "m"(offset[0]), ++ "m"(mmxsave)); ++ return v; ++} ++ ++static inline void mchbar_write64(const uintptr_t x, const uint64_t v) ++{ ++ const uint64_t *offset = (uint64_t *)(CONFIG_FIXED_MCHBAR_MMIO_BASE + x); ++ uint64_t mmxsave; ++ asm volatile ( ++ "\n\t movq %%mm0, %0" ++ "\n\t movq %2, %%mm0" ++ "\n\t movq %%mm0, %1" ++ "\n\t movq %3, %%mm0" ++ "\n\t emms" ++ : "=m"(mmxsave) ++ : "m"(offset[0]), ++ "m"(v), ++ "m"(mmxsave)); ++} ++ + void raminit_main(enum raminit_boot_mode bootmode); + + enum raminit_status collect_spd_info(struct sysinfo *ctrl); +@@ -204,6 +282,7 @@ enum raminit_status initialise_mpll(struct sysinfo *ctrl); + enum raminit_status convert_timings(struct sysinfo *ctrl); + enum raminit_status configure_mc(struct sysinfo *ctrl); + enum raminit_status configure_memory_map(struct sysinfo *ctrl); ++enum raminit_status do_jedec_init(struct sysinfo *ctrl); + + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); +@@ -216,8 +295,28 @@ uint32_t get_tXS_offset(uint32_t mem_clock_mhz); + uint32_t get_tZQOPER(uint32_t mem_clock_mhz, bool lpddr); + uint32_t get_tZQCS(uint32_t mem_clock_mhz, bool lpddr); + ++enum raminit_status io_reset(void); + enum raminit_status wait_for_first_rcomp(void); + ++uint16_t encode_ddr3_rttnom(uint32_t rttnom); ++void ddr3_program_mr1(struct sysinfo *ctrl, uint8_t wl_mode, uint8_t q_off); ++enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl); ++ ++void reut_issue_mrs( ++ struct sysinfo *ctrl, ++ uint8_t channel, ++ uint8_t rankmask, ++ uint8_t mr, ++ uint16_t val); ++ ++void reut_issue_mrs_all( ++ struct sysinfo *ctrl, ++ uint8_t channel, ++ uint8_t mr, ++ const uint16_t val[NUM_SLOTS]); ++ ++enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type); ++ + uint8_t get_rx_bias(const struct sysinfo *ctrl); + + uint8_t get_tCWL(uint32_t mem_clock_mhz); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +index 70487e1640..9929f617fe 100644 +--- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -335,6 +335,127 @@ union mcscheds_cbit_reg { + uint32_t raw; + }; + ++union reut_pat_cadb_prog_reg { ++ struct __packed { ++ uint32_t addr : 16; // Bits 15:0 ++ uint32_t : 8; // Bits 23:16 ++ uint32_t bank : 3; // Bits 26:24 ++ uint32_t : 5; // Bits 31:27 ++ uint32_t cs : 4; // Bits 35:32 ++ uint32_t : 4; // Bits 39:36 ++ uint32_t cmd : 3; // Bits 42:40 ++ uint32_t : 5; // Bits 47:43 ++ uint32_t odt : 4; // Bits 51:48 ++ uint32_t : 4; // Bits 55:52 ++ uint32_t cke : 4; // Bits 59:56 ++ uint32_t : 4; // Bits 63:60 ++ }; ++ uint64_t raw; ++ uint32_t raw32[2]; ++}; ++ ++union reut_pat_cadb_mrs_reg { ++ struct __packed { ++ uint32_t delay_gap : 3; // Bits 2:0 ++ uint32_t : 5; // Bits 7:3 ++ uint32_t start_ptr : 3; // Bits 10:8 ++ uint32_t : 5; // Bits 15:11 ++ uint32_t end_ptr : 3; // Bits 18:16 ++ uint32_t : 5; // Bits 23:19 ++ uint32_t curr_ptr : 3; // Bits 26:24 ++ uint32_t : 5; // Bits 31:27 ++ }; ++ uint32_t raw; ++}; ++ ++union reut_seq_cfg_reg { ++ struct __packed { ++ uint32_t : 3; // Bits 2:0 ++ uint32_t stop_base_seq_on_wrap_trigger : 1; // Bits 3:3 ++ uint32_t : 1; // Bits 4:4 ++ uint32_t address_update_rate_mode : 1; // Bits 5:5 ++ uint32_t : 1; // Bits 6:6 ++ uint32_t enable_dummy_reads : 1; // Bits 7:7 ++ uint32_t : 2; // Bits 9:8 ++ uint32_t enable_constant_write_strobe : 1; // Bits 10:10 ++ uint32_t global_control : 1; // Bits 11:11 ++ uint32_t initialization_mode : 2; // Bits 13:12 ++ uint32_t : 2; // Bits 15:14 ++ uint32_t early_steppings_loop_count : 5; // Bits 20:16 *** Not on C0 *** ++ uint32_t : 3; // Bits 23:21 ++ uint32_t subsequence_start_pointer : 3; // Bits 26:24 ++ uint32_t : 1; // Bits 27:27 ++ uint32_t subsequence_end_pointer : 3; // Bits 30:28 ++ uint32_t : 1; // Bits 31:31 ++ uint32_t start_test_delay : 10; // Bits 41:32 ++ uint32_t : 22; // Bits 63:42 ++ }; ++ uint64_t raw; ++ uint32_t raw32[2]; ++}; ++ ++union reut_seq_ctl_reg { ++ struct __packed { ++ uint32_t start_test : 1; // Bits 0:0 ++ uint32_t stop_test : 1; // Bits 1:1 ++ uint32_t clear_errors : 1; // Bits 2:2 ++ uint32_t : 1; // Bits 3:3 ++ uint32_t stop_on_error : 1; // Bits 4:4 ++ uint32_t : 27; // Bits 31:5 ++ }; ++ uint32_t raw; ++}; ++ ++union reut_global_err_reg { ++ struct __packed { ++ uint32_t ch_error : 2; // Bits 1:0 ++ uint32_t : 14; // Bits 15:2 ++ uint32_t ch_test_done : 2; // Bits 17:16 ++ uint32_t : 14; // Bits 31:18 ++ }; ++ uint32_t raw; ++}; ++ ++union reut_misc_cke_ctrl_reg { ++ struct __packed { ++ uint32_t cke_override : 4; // Bits 3:0 ++ uint32_t : 4; // Bits 7:4 ++ uint32_t cke_en_start_test_sync : 1; // Bits 8:8 ++ uint32_t : 7; // Bits 15:9 ++ uint32_t cke_on : 4; // Bits 19:16 ++ uint32_t : 12; // Bits 31:20 ++ }; ++ uint32_t raw; ++}; ++ ++union reut_misc_odt_ctrl_reg { ++ struct __packed { ++ uint32_t odt_override : 4; // Bits 3:0 ++ uint32_t : 12; // Bits 15:4 ++ uint32_t odt_on : 4; // Bits 19:16 ++ uint32_t : 11; // Bits 30:20 ++ uint32_t mpr_train_ddr_on : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union mcscheds_dft_misc_reg { ++ struct __packed { ++ uint32_t wdar : 1; // Bits 0:0 ++ uint32_t safe_mask_sel : 3; // Bits 3:1 ++ uint32_t force_rcv_en : 1; // Bits 4:4 ++ uint32_t : 3; // Bits 7:5 ++ uint32_t ddr_qualifier : 2; // Bits 9:8 ++ uint32_t qualifier_length : 2; // Bits 11:10 ++ uint32_t wdb_block_en : 1; // Bits 12:12 ++ uint32_t rt_dft_read_ptr : 4; // Bits 16:13 ++ uint32_t rt_dft_read_enable : 1; // Bits 17:17 ++ uint32_t rt_dft_read_sel_addr : 1; // Bits 18:18 ++ uint32_t : 13; // Bits 31:19 ++ }; ++ uint32_t raw; ++}; ++ + union tc_bank_reg { + struct __packed { + uint32_t tRCD : 5; // Bits 4:0 +@@ -428,6 +549,18 @@ union tc_srftp_reg { + uint32_t raw; + }; + ++union tc_mr2_shadow_reg { ++ struct __packed { ++ uint32_t mr2_shadow_low : 6; // Bits 5:0 ++ uint32_t srt_available : 2; // Bits 7:6 ++ uint32_t mr2_shadow_high : 3; // Bits 10:8 ++ uint32_t : 3; // Bits 13:11 ++ uint32_t addr_bit_swizzle : 2; // Bits 15:14 ++ uint32_t : 16; // Bits 31:16 ++ }; ++ uint32_t raw; ++}; ++ + union mcmain_command_rate_limit_reg { + struct __packed { + uint32_t enable_cmd_limit : 1; // Bits 0:0 +@@ -483,6 +616,27 @@ union mad_zr_reg { + uint32_t raw; + }; + ++union mc_init_state_g_reg { ++ struct __packed { ++ uint32_t pu_mrc_done : 1; // Bits 0:0 ++ uint32_t ddr_not_reset : 1; // Bits 1:1 ++ uint32_t : 1; // Bits 2:2 ++ uint32_t refresh_enable : 1; // Bits 3:3 ++ uint32_t : 1; // Bits 4:4 ++ uint32_t mc_init_done_ack : 1; // Bits 5:5 ++ uint32_t : 1; // Bits 6:6 ++ uint32_t mrc_done : 1; // Bits 7:7 ++ uint32_t safe_self_refresh : 1; // Bits 8:8 ++ uint32_t : 1; // Bits 9:9 ++ uint32_t hvm_gate_ddr_reset : 1; // Bits 10:10 ++ uint32_t : 11; // Bits 21:11 ++ uint32_t dclk_enable : 1; // Bits 22:22 ++ uint32_t reset_io : 1; // Bits 23:23 ++ uint32_t : 8; // Bits 31:24 ++ }; ++ uint32_t raw; ++}; ++ + /* Same definition for P_COMP, M_COMP, D_COMP */ + union pcu_comp_reg { + struct __packed { +diff --git a/src/northbridge/intel/haswell/native_raminit/reut.c b/src/northbridge/intel/haswell/native_raminit/reut.c +new file mode 100644 +index 0000000000..31019f74a1 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/reut.c +@@ -0,0 +1,196 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++enum { ++ CADB_CMD_MRS = 0, ++ CADB_CMD_REF = 1, ++ CADB_CMD_PRE = 2, ++ CADB_CMD_ACT = 3, ++ CADB_CMD_WR = 4, ++ CADB_CMD_RD = 5, ++ CADB_CMD_ZQ = 6, ++ CADB_CMD_NOP = 7, ++}; ++ ++/* ++ * DDR3 rank mirror swaps the following pins: A3<->A4, A5<->A6, A7<->A8, BA0<->BA1 ++ * ++ * Note that the swapped bits are contiguous. We can use some XOR magic to swap the bits. ++ * Address lanes are at bits 0..15 and bank selects are at bits 24..26 on the REUT register. ++ */ ++#define MIRROR_BITS (BIT(24) | BIT(7) | BIT(5) | BIT(3)) ++static uint64_t cadb_prog_rank_mirror(const uint64_t cadb_prog) ++{ ++ /* First XOR: find which pairs of bits are different (need swapping) */ ++ const uint64_t tmp64 = (cadb_prog ^ (cadb_prog >> 1)) & MIRROR_BITS; ++ ++ /* Second XOR: invert the pairs of bits that have different values */ ++ return cadb_prog ^ (tmp64 | tmp64 << 1); ++} ++ ++static enum raminit_status reut_write_cadb_cmd( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const uint8_t rankmask, ++ const uint8_t cmd, ++ const uint8_t bank, ++ const uint16_t valarr[NUM_SLOTRANKS], ++ const uint8_t delay) ++{ ++ union mcscheds_dft_misc_reg dft_misc = { ++ .raw = mchbar_read32(MCSCHEDS_DFT_MISC), ++ }; ++ dft_misc.ddr_qualifier = 0; ++ mchbar_write32(MCSCHEDS_DFT_MISC, dft_misc.raw); ++ ++ /* Pointer will be dynamically incremented after a write to CADB_PROG register */ ++ mchbar_write8(REUT_ch_PAT_CADB_WRITE_PTR(channel), 0); ++ ++ uint8_t count = 0; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!(ctrl->rankmap[channel] & BIT(rank) & rankmask)) ++ continue; ++ ++ union reut_pat_cadb_prog_reg reut_cadb_prog = { ++ .addr = valarr[rank], ++ .bank = bank, ++ .cs = ~BIT(rank), /* CS is active low */ ++ .cmd = cmd, ++ .cke = 0xf, ++ }; ++ if (ctrl->rank_mirrored[channel] & BIT(rank)) ++ reut_cadb_prog.raw = cadb_prog_rank_mirror(reut_cadb_prog.raw); ++ ++ mchbar_write64(REUT_ch_PAT_CADB_PROG(channel), reut_cadb_prog.raw); ++ count++; ++ } ++ if (!count) { ++ printk(BIOS_ERR, "%s: rankmask is invalid\n", __func__); ++ return RAMINIT_STATUS_UNSPECIFIED_ERROR; /** FIXME: Is this needed? **/ ++ } ++ const union reut_pat_cadb_mrs_reg reut_cadb_mrs = { ++ .delay_gap = delay ? delay : 3, ++ .end_ptr = count - 1, ++ }; ++ mchbar_write32(REUT_ch_PAT_CADB_MRS(channel), reut_cadb_mrs.raw); ++ ++ const uint32_t reut_seq_cfg_save = mchbar_read32(REUT_ch_SEQ_CFG(channel)); ++ union reut_seq_cfg_reg reut_seq_cfg = { ++ .raw = reut_seq_cfg_save, ++ }; ++ reut_seq_cfg.global_control = 0; ++ reut_seq_cfg.initialization_mode = REUT_MODE_MRS; ++ mchbar_write32(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); ++ mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { ++ .start_test = 1, ++ .clear_errors = 1, ++ }.raw); ++ enum raminit_status status = RAMINIT_STATUS_SUCCESS; ++ union reut_global_err_reg reut_global_err; ++ struct stopwatch timer; ++ stopwatch_init_msecs_expire(&timer, 100); ++ do { ++ reut_global_err.raw = mchbar_read32(REUT_GLOBAL_ERR); ++ if (reut_global_err.ch_error & BIT(channel)) { ++ printk(BIOS_ERR, "Unexpected REUT error for channel %u\n", channel); ++ status = RAMINIT_STATUS_REUT_ERROR; ++ break; ++ } ++ if (stopwatch_expired(&timer)) { ++ printk(BIOS_ERR, "%s: REUT timed out!\n", __func__); ++ status = RAMINIT_STATUS_POLL_TIMEOUT; ++ break; ++ } ++ } while (!(reut_global_err.ch_test_done & BIT(channel))); ++ mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { ++ .clear_errors = 1, ++ }.raw); ++ mchbar_write32(REUT_ch_SEQ_CFG(channel), reut_seq_cfg_save); ++ return status; ++} ++ ++static enum raminit_status reut_write_cadb_cmd_all( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const uint8_t rankmask, ++ const uint8_t cmd, ++ const uint8_t bank, ++ const uint16_t val, ++ const uint8_t delay) ++{ ++ const uint16_t valarr[NUM_SLOTRANKS] = { val, val, val, val }; ++ return reut_write_cadb_cmd(ctrl, channel, rankmask, cmd, bank, valarr, delay); ++} ++ ++void reut_issue_mrs( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const uint8_t rankmask, ++ const uint8_t mr, ++ const uint16_t val) ++{ ++ reut_write_cadb_cmd_all(ctrl, channel, rankmask, CADB_CMD_MRS, mr, val, 0); ++} ++ ++void reut_issue_mrs_all( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const uint8_t mr, ++ const uint16_t val[NUM_SLOTS]) ++{ ++ const uint16_t valarr[NUM_SLOTRANKS] = { val[0], val[0], val[1], val[1] }; ++ reut_write_cadb_cmd(ctrl, channel, 0xf, CADB_CMD_MRS, mr, valarr, 0); ++} ++ ++enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type) ++{ ++ /** TODO: Issuing ZQ commands differs for LPDDR **/ ++ if (ctrl->lpddr) ++ die("%s: LPDDR not yet supported in ZQ calibration\n", __func__); ++ ++ __maybe_unused uint8_t opcode; /* NOTE: Only used for LPDDR */ ++ uint16_t zq = 0; ++ switch (zq_type) { ++ case ZQ_INIT: ++ zq = BIT(10); ++ opcode = 0xff; ++ break; ++ case ZQ_LONG: ++ zq = BIT(10); ++ opcode = 0xab; ++ break; ++ case ZQ_SHORT: ++ opcode = 0x56; ++ break; ++ case ZQ_RESET: ++ opcode = 0xc3; ++ break; ++ default: ++ die("%s: ZQ type %u is invalid\n", __func__, zq_type); ++ } ++ ++ /* ZQCS on single-channel needs a longer delay */ ++ const uint8_t delay = zq_type == ZQ_SHORT && (!ctrl->dpc[0] || !ctrl->dpc[1]) ? 7 : 1; ++ enum raminit_status status = RAMINIT_STATUS_SUCCESS; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!(BIT(channel) & chanmask) || !does_ch_exist(ctrl, channel)) ++ continue; ++ ++ status = reut_write_cadb_cmd_all(ctrl, channel, 0xf, CADB_CMD_ZQ, 0, zq, delay); ++ if (status) ++ break; ++ } ++ ++ /* Wait a bit after ZQ INIT and ZQCL commands */ ++ if (zq) ++ udelay(1); ++ ++ return status; ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 2acc5cbbc8..4fc78a7f43 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -96,15 +96,36 @@ + + #define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) + ++#define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) ++ ++#define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch) ++ ++#define REUT_ch_PAT_CADB_WRITE_PTR(ch) _MCMAIN_C(0x41bc, ch) ++#define REUT_ch_PAT_CADB_PROG(ch) _MCMAIN_C(0x41c0, ch) ++ + #define TC_ZQCAL_ch(ch) _MCMAIN_C(0x4290, ch) + #define TC_RFP_ch(ch) _MCMAIN_C(0x4294, ch) + #define TC_RFTP_ch(ch) _MCMAIN_C(0x4298, ch) ++#define TC_MR2_SHADOW_ch(ch) _MCMAIN_C(0x429c, ch) + #define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) + #define TC_SRFTP_ch(ch) _MCMAIN_C(0x42a4, ch) + ++#define REUT_GLOBAL_ERR 0x4804 ++ ++#define REUT_ch_SEQ_CFG(ch) (0x48a8 + 8 * (ch)) ++ ++#define REUT_ch_SEQ_CTL(ch) (0x48b8 + 4 * (ch)) ++ + /* MCMAIN broadcast */ + #define MCSCHEDS_CBIT 0x4c20 + ++#define MCSCHEDS_DFT_MISC 0x4c30 ++ ++#define REUT_ERR_DATA_STATUS 0x4ce0 ++ ++#define REUT_MISC_CKE_CTRL 0x4d90 ++#define REUT_MISC_ODT_CTRL 0x4d94 ++ + #define MCMNTS_SC_WDBWM 0x4f8c + + /* MCDECS */ +diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h +index 07f4b9dc16..5b3696347c 100644 +--- a/src/southbridge/intel/lynxpoint/pch.h ++++ b/src/southbridge/intel/lynxpoint/pch.h +@@ -586,6 +586,8 @@ void mainboard_config_rcba(void); + #define ACPIIRQEN 0x31e0 /* 32bit */ + #define OIC 0x31fe /* 16bit */ + #define PRSTS 0x3310 /* 32bit */ ++#define PM_CFG2 0x333c /* 32bit */ ++#define PM_CFG2_DRAM_RESET_CTL (1 << 26) /* ULT only */ + #define PMSYNC_CONFIG 0x33c4 /* 32bit */ + #define PMSYNC_CONFIG2 0x33cc /* 32bit */ + #define SOFT_RESET_CTRL 0x38f4 +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0036-haswell-NRI-Add-pre-training-steps.patch b/config/coreboot/default/patches/0036-haswell-NRI-Add-pre-training-steps.patch new file mode 100644 index 00000000..1b58a1f1 --- /dev/null +++ b/config/coreboot/default/patches/0036-haswell-NRI-Add-pre-training-steps.patch @@ -0,0 +1,392 @@ +From 19bc8d27c8f52b205df218d5917ae67ac4646024 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sat, 7 May 2022 23:12:18 +0200 +Subject: [PATCH 36/51] haswell NRI: Add pre-training steps + +Implement pre-training steps, which consist of enabling ECC I/O and +filling the WDB (Write Data Buffer, stores test patterns) through a +magic LDAT port. + +Change-Id: Ie2e09e3b218c4569ed8de5c5e1b05d491032e0f1 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/raminit_main.c | 35 ++++ + .../haswell/native_raminit/raminit_native.h | 24 +++ + .../haswell/native_raminit/reg_structs.h | 45 +++++ + .../intel/haswell/native_raminit/setup_wdb.c | 159 ++++++++++++++++++ + .../intel/haswell/registers/mchbar.h | 9 + + 6 files changed, 273 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/setup_wdb.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index e9212df9e6..8d7d4e4db0 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -10,5 +10,6 @@ romstage-y += memory_map.c + romstage-y += raminit_main.c + romstage-y += raminit_native.c + romstage-y += reut.c ++romstage-y += setup_wdb.c + romstage-y += spd_bitmunching.c + romstage-y += timings_refresh.c +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 94b268468c..5e4674957d 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -3,6 +3,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -12,6 +13,39 @@ + + #include "raminit_native.h" + ++static enum raminit_status pre_training(struct sysinfo *ctrl) ++{ ++ /* Skip on S3 resume */ ++ if (ctrl->bootmode == BOOTMODE_S3) ++ return RAMINIT_STATUS_SUCCESS; ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { ++ if (!rank_in_ch(ctrl, slot + slot, channel)) ++ continue; ++ ++ printk(RAM_DEBUG, "C%uS%u:\n", channel, slot); ++ printk(RAM_DEBUG, "\tMR0: 0x%04x\n", ctrl->mr0[channel][slot]); ++ printk(RAM_DEBUG, "\tMR1: 0x%04x\n", ctrl->mr1[channel][slot]); ++ printk(RAM_DEBUG, "\tMR2: 0x%04x\n", ctrl->mr2[channel][slot]); ++ printk(RAM_DEBUG, "\tMR3: 0x%04x\n", ctrl->mr3[channel][slot]); ++ printk(RAM_DEBUG, "\n"); ++ } ++ if (ctrl->is_ecc) { ++ union mad_dimm_reg mad_dimm = { ++ .raw = mchbar_read32(MAD_DIMM(channel)), ++ }; ++ /* Enable ECC I/O */ ++ mad_dimm.ecc_mode = 1; ++ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); ++ /* Wait 4 usec after enabling the ECC I/O, needed by HW */ ++ udelay(4); ++ } ++ } ++ setup_wdb(ctrl); ++ return RAMINIT_STATUS_SUCCESS; ++} ++ + struct task_entry { + enum raminit_status (*task)(struct sysinfo *); + bool is_enabled; +@@ -25,6 +59,7 @@ static const struct task_entry cold_boot[] = { + { configure_mc, true, "CONFMC", }, + { configure_memory_map, true, "MEMMAP", }, + { do_jedec_init, true, "JEDECINIT", }, ++ { pre_training, true, "PRETRAIN", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 759d755d6d..4d9487d79c 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -36,6 +36,13 @@ + + #define RTTNOM_MASK (BIT(9) | BIT(6) | BIT(2)) + ++#define BASIC_VA_PAT_SPREAD_8 0x01010101 ++ ++#define WDB_CACHE_LINE_SIZE 8 ++ ++#define NUM_WDB_CL_MUX_SEEDS 3 ++#define NUM_CADB_MUX_SEEDS 3 ++ + /* ZQ calibration types */ + enum { + ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ +@@ -317,6 +324,23 @@ void reut_issue_mrs_all( + + enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type); + ++void write_wdb_fixed_pat( ++ const struct sysinfo *ctrl, ++ const uint8_t patterns[], ++ const uint8_t pat_mask[], ++ uint8_t spread, ++ uint16_t start); ++ ++void write_wdb_va_pat( ++ const struct sysinfo *ctrl, ++ uint32_t agg_mask, ++ uint32_t vic_mask, ++ uint8_t vic_rot, ++ uint16_t start); ++ ++void program_wdb_lfsr(const struct sysinfo *ctrl, bool cleanup); ++void setup_wdb(const struct sysinfo *ctrl); ++ + uint8_t get_rx_bias(const struct sysinfo *ctrl); + + uint8_t get_tCWL(uint32_t mem_clock_mhz); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +index 9929f617fe..7aa8d8c8b2 100644 +--- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -335,6 +335,18 @@ union mcscheds_cbit_reg { + uint32_t raw; + }; + ++union reut_pat_cl_mux_lmn_reg { ++ struct __packed { ++ uint32_t l_data_select : 1; // Bits 0:0 ++ uint32_t en_sweep_freq : 1; // Bits 1:1 ++ uint32_t : 6; // Bits 7:2 ++ uint32_t l_counter : 8; // Bits 15:8 ++ uint32_t m_counter : 8; // Bits 23:16 ++ uint32_t n_counter : 8; // Bits 31:24 ++ }; ++ uint32_t raw; ++}; ++ + union reut_pat_cadb_prog_reg { + struct __packed { + uint32_t addr : 16; // Bits 15:0 +@@ -439,6 +451,39 @@ union reut_misc_odt_ctrl_reg { + uint32_t raw; + }; + ++union ldat_pdat_reg { ++ struct __packed { ++ uint32_t fast_addr : 12; // Bits 11:0 ++ uint32_t : 4; // Bits 15:12 ++ uint32_t addr_en : 1; // Bits 16:16 ++ uint32_t seq_en : 1; // Bits 17:17 ++ uint32_t pol_0 : 1; // Bits 18:18 ++ uint32_t pol_1 : 1; // Bits 19:19 ++ uint32_t cmd_a : 4; // Bits 23:20 ++ uint32_t cmd_b : 4; // Bits 27:24 ++ uint32_t cmd_c : 4; // Bits 31:28 ++ }; ++ uint32_t raw; ++}; ++ ++union ldat_sdat_reg { ++ struct __packed { ++ uint32_t bank_sel : 4; // Bits 3:0 ++ uint32_t : 1; // Bits 4:4 ++ uint32_t array_sel : 5; // Bits 9:5 ++ uint32_t cmp : 1; // Bits 10:10 ++ uint32_t replicate : 1; // Bits 11:11 ++ uint32_t dword : 4; // Bits 15:12 ++ uint32_t mode : 2; // Bits 17:16 ++ uint32_t mpmap : 6; // Bits 23:18 ++ uint32_t mpb_offset : 4; // Bits 27:24 ++ uint32_t stage_en : 1; // Bits 28:28 ++ uint32_t shadow : 2; // Bits 30:29 ++ uint32_t : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ + union mcscheds_dft_misc_reg { + struct __packed { + uint32_t wdar : 1; // Bits 0:0 +diff --git a/src/northbridge/intel/haswell/native_raminit/setup_wdb.c b/src/northbridge/intel/haswell/native_raminit/setup_wdb.c +new file mode 100644 +index 0000000000..ec37c48415 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/setup_wdb.c +@@ -0,0 +1,159 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++ ++#include "raminit_native.h" ++ ++static void ldat_write_cacheline( ++ const struct sysinfo *const ctrl, ++ const uint8_t chunk, ++ const uint16_t start, ++ const uint64_t data) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* ++ * Do not do a 64-bit write here. The register is not aligned ++ * to a 64-bit boundary, which could potentially cause issues. ++ */ ++ mchbar_write32(QCLK_ch_LDAT_DATA_IN_x(channel, 0), data & UINT32_MAX); ++ mchbar_write32(QCLK_ch_LDAT_DATA_IN_x(channel, 1), data >> 32); ++ /* ++ * Set REPLICATE = 0 as you don't want to replicate the data. ++ * Set BANK_SEL to the chunk you want to write the 64 bits to. ++ * Set ARRAY_SEL = 0 (the MC WDB) and MODE = 1. ++ */ ++ const union ldat_sdat_reg ldat_sdat = { ++ .bank_sel = chunk, ++ .mode = 1, ++ }; ++ mchbar_write32(QCLK_ch_LDAT_SDAT(channel), ldat_sdat.raw); ++ /* ++ * Finally, write the PDAT register indicating which cacheline ++ * of the WDB you want to write to by setting FAST_ADDR field ++ * to one of the 64 cache lines. Also set CMD_B in the PDAT ++ * register to 4'b1000, indicating that this is a LDAT write. ++ */ ++ const union ldat_pdat_reg ldat_pdat = { ++ .fast_addr = MIN(start, 0xfff), ++ .cmd_b = 8, ++ }; ++ mchbar_write32(QCLK_ch_LDAT_PDAT(channel), ldat_pdat.raw); ++ } ++} ++ ++static void clear_ldat_mode(const struct sysinfo *const ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) ++ mchbar_write32(QCLK_ch_LDAT_SDAT(channel), 0); ++} ++ ++void write_wdb_fixed_pat( ++ const struct sysinfo *const ctrl, ++ const uint8_t patterns[], ++ const uint8_t pat_mask[], ++ const uint8_t spread, ++ const uint16_t start) ++{ ++ for (uint8_t chunk = 0; chunk < WDB_CACHE_LINE_SIZE; chunk++) { ++ uint64_t data = 0; ++ for (uint8_t b = 0; b < 64; b++) { ++ const uint8_t beff = b % spread; ++ const uint8_t burst = patterns[pat_mask[beff]]; ++ if (burst & BIT(chunk)) ++ data |= 1ULL << b; ++ } ++ ldat_write_cacheline(ctrl, chunk, start, data); ++ } ++ clear_ldat_mode(ctrl); ++} ++ ++static inline uint32_t rol_u32(const uint32_t val) ++{ ++ return (val << 1) | ((val >> 31) & 1); ++} ++ ++void write_wdb_va_pat( ++ const struct sysinfo *const ctrl, ++ const uint32_t agg_mask, ++ const uint32_t vic_mask, ++ const uint8_t vic_rot, ++ const uint16_t start) ++{ ++ static const uint8_t va_mask_to_compressed[4] = {0xaa, 0xc0, 0xcc, 0xf0}; ++ uint32_t v_mask = vic_mask; ++ uint32_t a_mask = agg_mask; ++ for (uint8_t v = 0; v < vic_rot; v++) { ++ uint8_t compressed[32] = {0}; ++ /* Iterate through all 32 bits and create a compressed version of cacheline */ ++ for (uint8_t b = 0; b < ARRAY_SIZE(compressed); b++) { ++ const uint8_t vic = !!(v_mask & BIT(b)); ++ const uint8_t agg = !!(a_mask & BIT(b)); ++ const uint8_t index = !vic << 1 | agg << 0; ++ compressed[b] = va_mask_to_compressed[index]; ++ } ++ for (uint8_t chunk = 0; chunk < WDB_CACHE_LINE_SIZE; chunk++) { ++ uint32_t data = 0; ++ for (uint8_t b = 0; b < ARRAY_SIZE(compressed); b++) ++ data |= !!(compressed[b] & BIT(chunk)) << b; ++ ++ const uint64_t data64 = (uint64_t)data << 32 | data; ++ ldat_write_cacheline(ctrl, chunk, start + v, data64); ++ } ++ v_mask = rol_u32(v_mask); ++ a_mask = rol_u32(a_mask); ++ } ++ clear_ldat_mode(ctrl); ++} ++ ++void program_wdb_lfsr(const struct sysinfo *ctrl, const bool cleanup) ++{ ++ /* Cleanup LFSR seeds are sequential */ ++ const uint32_t cleanup_seeds[NUM_WDB_CL_MUX_SEEDS] = { 0xaaaaaa, 0xcccccc, 0xf0f0f0 }; ++ const uint32_t regular_seeds[NUM_WDB_CL_MUX_SEEDS] = { 0xa10ca1, 0xef0d08, 0xad0a1e }; ++ const uint32_t *seeds = cleanup ? cleanup_seeds : regular_seeds; ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t i = 0; i < NUM_WDB_CL_MUX_SEEDS; i++) { ++ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_RD_x(channel, i), seeds[i]); ++ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_WR_x(channel, i), seeds[i]); ++ } ++ } ++} ++ ++void setup_wdb(const struct sysinfo *ctrl) ++{ ++ const uint32_t amask[9] = { ++ 0x86186186, 0x18618618, 0x30c30c30, ++ 0xa28a28a2, 0x8a28a28a, 0x14514514, ++ 0x28a28a28, 0x92492492, 0x24924924, ++ }; ++ const uint32_t vmask = 0x41041041; ++ ++ /* Fill first 8 entries with simple 2-LFSR VA pattern */ ++ write_wdb_va_pat(ctrl, 0, BASIC_VA_PAT_SPREAD_8, 8, 0); ++ ++ /* Fill next 54 entries with 3-LFSR VA pattern */ ++ for (uint8_t a = 0; a < ARRAY_SIZE(amask); a++) ++ write_wdb_va_pat(ctrl, amask[a], vmask, 6, 8 + a * 6); ++ ++ program_wdb_lfsr(ctrl, false); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ const union reut_pat_cl_mux_lmn_reg wdb_cl_mux_lmn = { ++ .en_sweep_freq = 1, ++ .l_counter = 1, ++ .m_counter = 1, ++ .n_counter = 10, ++ }; ++ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_LMN(channel), wdb_cl_mux_lmn.raw); ++ } ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 4fc78a7f43..f8408e51a0 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -94,6 +94,11 @@ + #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) + #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) + ++#define REUT_ch_PAT_WDB_CL_MUX_WR_x(ch, x) _MCMAIN_C_X(0x4048, ch, x) /* x in 0 .. 2 */ ++#define REUT_ch_PAT_WDB_CL_MUX_RD_x(ch, x) _MCMAIN_C_X(0x4054, ch, x) /* x in 0 .. 2 */ ++ ++#define REUT_ch_PAT_WDB_CL_MUX_LMN(ch) _MCMAIN_C(0x4078, ch) ++ + #define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) + + #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) +@@ -110,6 +115,10 @@ + #define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) + #define TC_SRFTP_ch(ch) _MCMAIN_C(0x42a4, ch) + ++#define QCLK_ch_LDAT_PDAT(ch) _MCMAIN_C(0x42d0, ch) ++#define QCLK_ch_LDAT_SDAT(ch) _MCMAIN_C(0x42d4, ch) ++#define QCLK_ch_LDAT_DATA_IN_x(ch, x) _MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */ ++ + #define REUT_GLOBAL_ERR 0x4804 + + #define REUT_ch_SEQ_CFG(ch) (0x48a8 + 8 * (ch)) +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0036-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch b/config/coreboot/default/patches/0036-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch deleted file mode 100644 index cf6f20bb..00000000 --- a/config/coreboot/default/patches/0036-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch +++ /dev/null @@ -1,51 +0,0 @@ -From dba9c3776f90bf345070a90c048ff2bae7180f73 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sat, 6 Apr 2024 01:22:47 +0100 -Subject: [PATCH 36/65] nb/haswell: Fully disable iGPU when dGPU is used - -My earlier patch disabled decode *and* disabled the iGPU itself, but -a subsequent revision disabled only VGA decode. Upon revisiting, I -found that, actually, yes, you also need to disable the iGPU entirely. - -Tested on Dell 9020 SFF using broadwell MRC, with both iGPU and dGPU. -With this patch, the iGPU is completely disabled when you install a -graphics card, but the iGPU is available to use when no graphics card -is present. - -For more context, see: - -Author: Leah Rowe -Date: Fri Feb 23 13:33:31 2024 +0000 - - nb/haswell: Disable iGPU when dGPU is used - -And look at the Gerrit comments: - -https://review.coreboot.org/c/coreboot/+/80717/ - -So, my original submission on change 80717 was actually correct. -This patch fixes the issue. I tested on iGPU and dGPU, with both -broadwell and haswell mrc.bin. - -Signed-off-by: Leah Rowe ---- - src/northbridge/intel/haswell/gma.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c -index f7fad3183d..1b188e92e1 100644 ---- a/src/northbridge/intel/haswell/gma.c -+++ b/src/northbridge/intel/haswell/gma.c -@@ -466,6 +466,9 @@ static void gma_func0_disable(struct device *dev) - { - /* Disable VGA decode */ - pci_or_config16(pcidev_on_root(0, 0), GGC, 1 << 1); -+ -+ /* Required or else the graphics card doesn't work */ -+ dev->enabled = 0; - } - - static struct device_operations gma_func0_ops = { --- -2.39.5 - diff --git a/config/coreboot/default/patches/0037-ec-dell-mec5035-Replace-defines-with-enums.patch b/config/coreboot/default/patches/0037-ec-dell-mec5035-Replace-defines-with-enums.patch deleted file mode 100644 index 77011bce..00000000 --- a/config/coreboot/default/patches/0037-ec-dell-mec5035-Replace-defines-with-enums.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 7420608acfca1790756fd80d718b737352379dbe Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Tue, 28 May 2024 17:23:21 -0600 -Subject: [PATCH 37/38] ec/dell/mec5035: Replace defines with enums - -Instead of using defines for command IDs and argument values, use enums -to provide more type safety. This also has the effect of moving the -command IDs to a more central location instead of defines spread out -throughout the header. - -Change-Id: I788531e8b70e79541213853f177326d217235ef2 -Signed-off-by: Nicholas Chin -Reviewed-on: https://review.coreboot.org/c/coreboot/+/82998 -Tested-by: build bot (Jenkins) -Reviewed-by: Felix Singer ---- - src/ec/dell/mec5035/mec5035.c | 10 +++++----- - src/ec/dell/mec5035/mec5035.h | 20 ++++++++++++-------- - 2 files changed, 17 insertions(+), 13 deletions(-) - -diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c -index 68b6b2f7fb..dffbb7960c 100644 ---- a/src/ec/dell/mec5035/mec5035.c -+++ b/src/ec/dell/mec5035/mec5035.c -@@ -66,17 +66,17 @@ static enum cb_err write_mailbox_regs(const u8 *data, u8 start, u8 count) - return CB_SUCCESS; - } - --static void ec_command(u8 cmd) -+static void ec_command(enum mec5035_cmd cmd) - { - outb(0, MAILBOX_INDEX); -- outb(cmd, MAILBOX_DATA); -+ outb((u8)cmd, MAILBOX_DATA); - wait_ec(); - } - --u8 mec5035_mouse_touchpad(u8 setting) -+u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting) - { -- u8 buf[15] = {0}; -- write_mailbox_regs(&setting, 2, 1); -+ u8 buf[15] = {(u8)setting}; -+ write_mailbox_regs(buf, 2, 1); - ec_command(CMD_MOUSE_TP); - /* The vendor firmware reads 15 bytes starting at index 1, presumably - to get some sort of return code. Though I don't know for sure if -diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h -index fa15a9d621..32f791cb01 100644 ---- a/src/ec/dell/mec5035/mec5035.h -+++ b/src/ec/dell/mec5035/mec5035.h -@@ -7,16 +7,20 @@ - - #define NUM_REGISTERS 32 - -+enum mec5035_cmd { -+ CMD_MOUSE_TP = 0x1a, -+ CMD_RADIO_CTRL = 0x2b, -+ CMD_CPU_OK = 0xc2, -+}; -+ - /* Touchpad (TP) and mouse related. The EC seems to - default to 0 which results in the TP not working. */ --#define CMD_MOUSE_TP 0x1a --#define SERIAL_MOUSE 0 /* Disable TP, force use of a serial mouse */ --#define PS2_MOUSE 1 /* Disable TP when using a PS/2 mouse */ --#define TP_PS2_MOUSE 2 /* Leave TP enabled when using a PS/2 mouse */ -- --#define CMD_CPU_OK 0xc2 -+enum ec_mouse_setting { -+ SERIAL_MOUSE = 0, /* Disable TP, force use of a serial mouse */ -+ PS2_MOUSE, /* Disable TP when using a PS/2 mouse */ -+ TP_PS2_MOUSE /* Leave TP enabled when using a PS/2 mouse */ -+}; - --#define CMD_RADIO_CTRL 0x2b - #define RADIO_CTRL_NUM_ARGS 3 - enum ec_radio_dev { - RADIO_WLAN = 0, -@@ -29,7 +33,7 @@ enum ec_radio_state { - RADIO_ON - }; - --u8 mec5035_mouse_touchpad(u8 setting); -+u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting); - void mec5035_cpu_ok(void); - void mec5035_early_init(void); - void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state); --- -2.47.0 - diff --git a/config/coreboot/default/patches/0037-haswell-NRI-Add-REUT-I-O-test-library.patch b/config/coreboot/default/patches/0037-haswell-NRI-Add-REUT-I-O-test-library.patch new file mode 100644 index 00000000..eaafcde3 --- /dev/null +++ b/config/coreboot/default/patches/0037-haswell-NRI-Add-REUT-I-O-test-library.patch @@ -0,0 +1,1130 @@ +From 460a092b22c9800c5ee9d8c4198e8b241664693f Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 00:11:29 +0200 +Subject: [PATCH 37/51] haswell NRI: Add REUT I/O test library + +Implement a library to run I/O tests using the REUT hardware. + +Change-Id: Id7b207cd0a3989ddd23c88c6b1f0cfa79d2c861f +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/raminit_native.h | 110 +++ + .../haswell/native_raminit/reg_structs.h | 121 +++ + .../intel/haswell/native_raminit/testing_io.c | 744 ++++++++++++++++++ + .../intel/haswell/registers/mchbar.h | 30 + + 5 files changed, 1006 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/testing_io.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index 8d7d4e4db0..6e1b365602 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -12,4 +12,5 @@ romstage-y += raminit_native.c + romstage-y += reut.c + romstage-y += setup_wdb.c + romstage-y += spd_bitmunching.c ++romstage-y += testing_io.c + romstage-y += timings_refresh.c +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 4d9487d79c..f029e7f076 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -59,6 +59,88 @@ enum { + REUT_MODE_NOP = 3, /* Normal operation mode */ + }; + ++/* REUT error counter control */ ++enum { ++ COUNT_ERRORS_PER_CHANNEL = 0, ++ COUNT_ERRORS_PER_LANE = 1, ++ COUNT_ERRORS_PER_BYTE_GROUP = 2, ++ COUNT_ERRORS_PER_CHUNK = 3, ++}; ++ ++enum wdb_dq_pattern { ++ BASIC_VA = 0, ++ SEGMENT_WDB, ++ CADB, ++ TURN_AROUND, ++ LMN_VA, ++ TURN_AROUND_WR, ++ TURN_AROUND_ODT, ++ RD_RD_TA, ++ RD_RD_TA_ALL, ++}; ++ ++enum reut_cmd_pat { ++ PAT_WR_RD, ++ PAT_WR, ++ PAT_RD, ++ PAT_RD_WR_TA, ++ PAT_WR_RD_TA, ++ PAT_ODT_TA, ++}; ++ ++/* REUT subsequence types (B = Base, O = Offset) */ ++enum { ++ SUBSEQ_B_RD = 0 << 22, ++ SUBSEQ_B_WR = 1 << 22, ++ SUBSEQ_B_RD_WR = 2 << 22, ++ SUBSEQ_B_WR_RD = 3 << 22, ++ SUBSEQ_O_RD = 4 << 22, ++ SUBSEQ_O_WR = 5 << 22, ++}; ++ ++/* REUT mux control */ ++enum { ++ REUT_MUX_LMN = 0, ++ REUT_MUX_BTBUFFER = 1, ++ REUT_MUX_LFSR = 2, ++}; ++ ++/* Increment scale */ ++enum { ++ SCALE_LOGARITHM = 0, ++ SCALE_LINEAR = 1, ++}; ++ ++enum test_stop { ++ NSOE = 0, /* Never stop on error */ ++ NTHSOE = 1, /* Stop on the nth error (we use n = 1) */ ++ ABGSOE = 2, /* Stop on all byte groups error */ ++ ALSOE = 3, /* Stop on all lanes error */ ++}; ++ ++struct wdb_pat { ++ uint32_t start_ptr; /* Starting pointer in WDB */ ++ uint32_t stop_ptr; /* Stopping pointer in WDB */ ++ uint16_t inc_rate; /* How quickly the WDB walks through cachelines */ ++ uint8_t dq_pattern; /* DQ pattern to use (see enum wdb_dq_pattern above) */ ++}; ++ ++struct reut_pole { ++ uint16_t start; ++ uint16_t stop; ++ uint16_t order; ++ uint32_t inc_rate; ++ uint16_t inc_val; ++ bool wrap_trigger; ++}; ++ ++struct reut_box { ++ struct reut_pole rank; ++ struct reut_pole bank; ++ struct reut_pole row; ++ struct reut_pole col; ++}; ++ + enum command_training_iteration { + CT_ITERATION_CLOCK = 0, + CT_ITERATION_CMD_NORTH, +@@ -200,6 +282,10 @@ struct sysinfo { + uint16_t mr1[NUM_CHANNELS][NUM_SLOTS]; + uint16_t mr2[NUM_CHANNELS][NUM_SLOTS]; + uint16_t mr3[NUM_CHANNELS][NUM_SLOTS]; ++ ++ uint8_t dq_pat; ++ ++ uint8_t dq_pat_lc; + }; + + static inline bool is_hsw_ult(void) +@@ -341,6 +427,30 @@ void write_wdb_va_pat( + void program_wdb_lfsr(const struct sysinfo *ctrl, bool cleanup); + void setup_wdb(const struct sysinfo *ctrl); + ++void program_seq_addr(uint8_t channel, const struct reut_box *reut_addr, bool log_seq_addr); ++void program_loop_count(const struct sysinfo *ctrl, uint8_t channel, uint8_t lc_exp); ++ ++void setup_io_test( ++ struct sysinfo *ctrl, ++ uint8_t chanmask, ++ enum reut_cmd_pat cmd_pat, ++ uint16_t num_cl, ++ uint8_t lc, ++ const struct reut_box *reut_addr, ++ enum test_stop soe, ++ const struct wdb_pat *pat, ++ uint8_t en_cadb, ++ uint8_t subseq_wait); ++ ++void setup_io_test_cadb(struct sysinfo *ctrl, uint8_t chanmask, uint8_t lc, enum test_stop soe); ++void setup_io_test_basic_va(struct sysinfo *ctrl, uint8_t chm, uint8_t lc, enum test_stop soe); ++void setup_io_test_mpr(struct sysinfo *ctrl, uint8_t chanmask, uint8_t lc, enum test_stop soe); ++ ++uint8_t select_reut_ranks(struct sysinfo *ctrl, uint8_t channel, uint8_t rankmask); ++ ++void run_mpr_io_test(bool clear_errors); ++uint8_t run_io_test(struct sysinfo *ctrl, uint8_t chanmask, uint8_t dq_pat, bool clear_errors); ++ + uint8_t get_rx_bias(const struct sysinfo *ctrl); + + uint8_t get_tCWL(uint32_t mem_clock_mhz); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +index 7aa8d8c8b2..b943259b91 100644 +--- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -347,6 +347,54 @@ union reut_pat_cl_mux_lmn_reg { + uint32_t raw; + }; + ++union reut_err_ctl_reg { ++ struct __packed { ++ uint32_t stop_on_nth_error : 6; // Bits 5:0 ++ uint32_t : 6; // Bits 11:6 ++ uint32_t stop_on_error_control : 2; // Bits 13:12 ++ uint32_t : 2; // Bits 15:14 ++ uint32_t selective_err_enable_chunk : 8; // Bits 23:16 ++ uint32_t selective_err_enable_cacheline : 8; // Bits 31:24 ++ }; ++ uint32_t raw; ++}; ++ ++union reut_pat_cadb_mux_ctrl_reg { ++ struct __packed { ++ uint32_t mux_0_ctrl : 2; // Bits 1:0 ++ uint32_t : 2; // Bits 3:2 ++ uint32_t mux_1_ctrl : 2; // Bits 5:4 ++ uint32_t : 2; // Bits 7:6 ++ uint32_t mux_2_ctrl : 2; // Bits 9:8 ++ uint32_t : 6; // Bits 15:10 ++ uint32_t sel_mux_0_ctrl : 2; // Bits 17:16 ++ uint32_t : 2; // Bits 19:18 ++ uint32_t sel_mux_1_ctrl : 2; // Bits 21:20 ++ uint32_t : 2; // Bits 23:22 ++ uint32_t sel_mux_2_ctrl : 2; // Bits 25:24 ++ uint32_t : 6; // Bits 31:26 ++ }; ++ uint32_t raw; ++}; ++ ++union reut_pat_wdb_cl_mux_cfg_reg { ++ struct __packed { ++ uint32_t mux_0_control : 2; // Bits 1:0 ++ uint32_t : 1; // Bits 2:2 ++ uint32_t mux_1_control : 2; // Bits 4:3 ++ uint32_t : 1; // Bits 5:5 ++ uint32_t mux_2_control : 2; // Bits 7:6 ++ uint32_t : 6; // Bits 13:8 ++ uint32_t ecc_replace_byte_ctl : 1; // Bits 14:14 ++ uint32_t ecc_data_source_sel : 1; // Bits 15:15 ++ uint32_t save_lfsr_seed_rate : 6; // Bits 21:16 ++ uint32_t : 2; // Bits 23:22 ++ uint32_t reload_lfsr_seed_rate : 3; // Bits 26:24 ++ uint32_t : 5; // Bits 31:27 ++ }; ++ uint32_t raw; ++}; ++ + union reut_pat_cadb_prog_reg { + struct __packed { + uint32_t addr : 16; // Bits 15:0 +@@ -366,6 +414,19 @@ union reut_pat_cadb_prog_reg { + uint32_t raw32[2]; + }; + ++union reut_pat_wdb_cl_ctrl_reg { ++ struct __packed { ++ uint32_t inc_rate : 5; // Bits 4:0 ++ uint32_t inc_scale : 1; // Bits 5:5 ++ uint32_t : 2; // Bits 7:6 ++ uint32_t start_ptr : 6; // Bits 13:8 ++ uint32_t : 2; // Bits 15:14 ++ uint32_t end_ptr : 6; // Bits 21:16 ++ uint32_t : 10; // Bits 31:22 ++ }; ++ uint32_t raw; ++}; ++ + union reut_pat_cadb_mrs_reg { + struct __packed { + uint32_t delay_gap : 3; // Bits 2:0 +@@ -406,6 +467,66 @@ union reut_seq_cfg_reg { + uint32_t raw32[2]; + }; + ++union reut_seq_base_addr_reg { ++ struct __packed { ++ uint32_t : 3; // Bits 2:0 ++ uint32_t col_addr : 8; // Bits 10:3 ++ uint32_t : 13; // Bits 23:11 ++ uint32_t row_addr : 16; // Bits 39:24 ++ uint32_t : 8; // Bits 47:40 ++ uint32_t bank_addr : 3; // Bits 50:48 ++ uint32_t : 5; // Bits 55:51 ++ uint32_t rank_addr : 3; // Bits 58:56 ++ uint32_t : 5; // Bits 63:59 ++ }; ++ uint32_t raw32[2]; ++ uint64_t raw; ++}; ++ ++union reut_seq_misc_ctl_reg { ++ struct __packed { ++ uint32_t col_addr_order : 2; // Bits 1:0 ++ uint32_t row_addr_order : 2; // Bits 3:2 ++ uint32_t bank_addr_order : 2; // Bits 5:4 ++ uint32_t rank_addr_order : 2; // Bits 7:6 ++ uint32_t : 5; // Bits 12:8 ++ uint32_t addr_invert_rate : 3; // Bits 15:13 ++ uint32_t : 4; // Bits 19:16 ++ uint32_t col_addr_invert_en : 1; // Bits 20:20 ++ uint32_t row_addr_invert_en : 1; // Bits 21:21 ++ uint32_t bank_addr_invert_en : 1; // Bits 22:22 ++ uint32_t rank_addr_invert_en : 1; // Bits 23:23 ++ uint32_t col_wrap_trigger_en : 1; // Bits 24:24 ++ uint32_t row_wrap_trigger_en : 1; // Bits 25:25 ++ uint32_t bank_wrap_trigger_en : 1; // Bits 26:26 ++ uint32_t rank_wrap_trigger_en : 1; // Bits 27:27 ++ uint32_t col_wrap_carry_en : 1; // Bits 28:28 ++ uint32_t row_wrap_carry_en : 1; // Bits 29:29 ++ uint32_t bank_wrap_carry_en : 1; // Bits 30:30 ++ uint32_t rank_wrap_carry_en : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ ++union reut_seq_addr_inc_ctl_reg { ++ struct __packed { ++ uint32_t : 3; // Bits 2:0 ++ uint32_t col_addr_increment : 8; // Bits 10:3 ++ uint32_t : 1; // Bits 11:11 ++ uint32_t col_addr_update : 8; // Bits 19:12 ++ uint32_t row_addr_increment : 12; // Bits 31:20 ++ uint32_t row_addr_update : 6; // Bits 37:32 ++ uint32_t bank_addr_increment : 3; // Bits 40:38 ++ uint32_t : 3; // Bits 43:41 ++ uint32_t bank_addr_update : 8; // Bits 53:44 ++ uint32_t rank_addr_increment : 3; // Bits 54:52 ++ uint32_t : 1; // Bits 55:55 ++ uint32_t rank_addr_update : 8; // Bits 63:56 ++ }; ++ uint64_t raw; ++ uint32_t raw32[2]; ++}; ++ + union reut_seq_ctl_reg { + struct __packed { + uint32_t start_test : 1; // Bits 0:0 +diff --git a/src/northbridge/intel/haswell/native_raminit/testing_io.c b/src/northbridge/intel/haswell/native_raminit/testing_io.c +new file mode 100644 +index 0000000000..2632c238f8 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/testing_io.c +@@ -0,0 +1,744 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++static void set_cadb_patterns(const uint8_t channel, const uint16_t seeds[NUM_CADB_MUX_SEEDS]) ++{ ++ for (uint8_t i = 0; i < NUM_CADB_MUX_SEEDS; i++) ++ mchbar_write32(REUT_ch_PAT_CADB_MUX_x(channel, i), seeds[i]); ++} ++ ++static void setup_cadb( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const uint8_t vic_spread, ++ const uint8_t vic_bit) ++{ ++ const bool lmn_en = false; ++ ++ /* ++ * Currently, always start writing at CADB row 0. ++ * Could add a start point parameter in the future. ++ */ ++ mchbar_write8(REUT_ch_PAT_CADB_WRITE_PTR(channel), 0); ++ const uint8_t num_cadb_rows = 8; ++ for (uint8_t row = 0; row < num_cadb_rows; row++) { ++ const uint8_t lfsr0 = (row >> 0) & 1; ++ const uint8_t lfsr1 = (row >> 1) & 1; ++ uint64_t reg64 = 0; ++ for (uint8_t bit = 0; bit < 22; bit++) { ++ uint8_t bremap; ++ if (bit >= 19) { ++ /* (bremap in 40 .. 42) => CADB data control */ ++ bremap = bit + 21; ++ } else if (bit >= 16) { ++ /* (bremap in 24 .. 26) => CADB data bank */ ++ bremap = bit + 8; ++ } else { ++ /* (bremap in 0 .. 15) => CADB data address */ ++ bremap = bit; ++ } ++ const uint8_t fine = bit % vic_spread; ++ reg64 |= ((uint64_t)(fine == vic_bit ? lfsr0 : lfsr1)) << bremap; ++ } ++ /* ++ * Write row. CADB pointer is auto incremented after every write. This must be ++ * a single 64-bit write, otherwise the CADB pointer will auto-increment twice. ++ */ ++ mchbar_write64(REUT_ch_PAT_CADB_PROG(channel), reg64); ++ } ++ const union reut_pat_cadb_mux_ctrl_reg cadb_mux_ctrl = { ++ .mux_0_ctrl = lmn_en ? REUT_MUX_LMN : REUT_MUX_LFSR, ++ .mux_1_ctrl = REUT_MUX_LFSR, ++ .mux_2_ctrl = REUT_MUX_LFSR, ++ }; ++ mchbar_write32(REUT_ch_PAT_CADB_MUX_CTRL(channel), cadb_mux_ctrl.raw); ++ const union reut_pat_cl_mux_lmn_reg cadb_cl_mux_lmn = { ++ .en_sweep_freq = 1, ++ .l_counter = 1, ++ .m_counter = 1, ++ .n_counter = 6, ++ }; ++ mchbar_write32(REUT_ch_PAT_CADB_CL_MUX_LMN(channel), cadb_cl_mux_lmn.raw); ++ const uint16_t cadb_mux_seeds[NUM_CADB_MUX_SEEDS] = { 0x0ea1, 0xbeef, 0xdead }; ++ set_cadb_patterns(channel, cadb_mux_seeds); ++} ++ ++static uint32_t calc_rate(const uint32_t rate, const uint32_t lim, const uint8_t scale_bit) ++{ ++ return rate > lim ? log2_ceil(rate - 1) : BIT(scale_bit) | rate; ++} ++ ++void program_seq_addr( ++ const uint8_t channel, ++ const struct reut_box *reut_addr, ++ const bool log_seq_addr) ++{ ++ const int loglevel = log_seq_addr ? BIOS_ERR : BIOS_NEVER; ++ const uint32_t div = 8; ++ union reut_seq_base_addr_reg reut_seq_addr_start = { ++ .col_addr = reut_addr->col.start / div, ++ .row_addr = reut_addr->row.start, ++ .bank_addr = reut_addr->bank.start, ++ .rank_addr = reut_addr->rank.start, ++ }; ++ mchbar_write64(REUT_ch_SEQ_ADDR_START(channel), reut_seq_addr_start.raw); ++ reut_seq_addr_start.raw = mchbar_read64(REUT_ch_SEQ_ADDR_START(channel)); ++ printk(loglevel, "\tStart column: %u\n", reut_seq_addr_start.col_addr); ++ printk(loglevel, "\tStart row: %u\n", reut_seq_addr_start.row_addr); ++ printk(loglevel, "\tStart bank: %u\n", reut_seq_addr_start.bank_addr); ++ printk(loglevel, "\tStart rank: %u\n", reut_seq_addr_start.rank_addr); ++ printk(loglevel, "\n"); ++ ++ union reut_seq_base_addr_reg reut_seq_addr_stop = { ++ .col_addr = reut_addr->col.stop / div, ++ .row_addr = reut_addr->row.stop, ++ .bank_addr = reut_addr->bank.stop, ++ .rank_addr = reut_addr->rank.stop, ++ }; ++ mchbar_write64(REUT_ch_SEQ_ADDR_WRAP(channel), reut_seq_addr_stop.raw); ++ reut_seq_addr_stop.raw = mchbar_read64(REUT_ch_SEQ_ADDR_WRAP(channel)); ++ printk(loglevel, "\tStop column: %u\n", reut_seq_addr_stop.col_addr); ++ printk(loglevel, "\tStop row: %u\n", reut_seq_addr_stop.row_addr); ++ printk(loglevel, "\tStop bank: %u\n", reut_seq_addr_stop.bank_addr); ++ printk(loglevel, "\tStop rank: %u\n", reut_seq_addr_stop.rank_addr); ++ printk(loglevel, "\n"); ++ ++ union reut_seq_misc_ctl_reg reut_seq_misc_ctl = { ++ .col_wrap_trigger_en = reut_addr->col.wrap_trigger, ++ .row_wrap_trigger_en = reut_addr->row.wrap_trigger, ++ .bank_wrap_trigger_en = reut_addr->bank.wrap_trigger, ++ .rank_wrap_trigger_en = reut_addr->rank.wrap_trigger, ++ }; ++ mchbar_write32(REUT_ch_SEQ_MISC_CTL(channel), reut_seq_misc_ctl.raw); ++ printk(loglevel, "\tWrap column: %u\n", reut_addr->col.wrap_trigger); ++ printk(loglevel, "\tWrap row: %u\n", reut_addr->row.wrap_trigger); ++ printk(loglevel, "\tWrap bank: %u\n", reut_addr->bank.wrap_trigger); ++ printk(loglevel, "\tWrap rank: %u\n", reut_addr->rank.wrap_trigger); ++ printk(loglevel, "\n"); ++ ++ union reut_seq_addr_inc_ctl_reg reut_seq_addr_inc_ctl = { ++ .col_addr_update = calc_rate(reut_addr->col.inc_rate, 31, 7), ++ .row_addr_update = calc_rate(reut_addr->row.inc_rate, 15, 5), ++ .bank_addr_update = calc_rate(reut_addr->bank.inc_rate, 31, 7), ++ .rank_addr_update = calc_rate(reut_addr->rank.inc_rate, 31, 7), ++ .col_addr_increment = reut_addr->col.inc_val, ++ .row_addr_increment = reut_addr->row.inc_val, ++ .bank_addr_increment = reut_addr->bank.inc_val, ++ .rank_addr_increment = reut_addr->rank.inc_val, ++ }; ++ printk(loglevel, "\tUpdRate column: %u\n", reut_addr->col.inc_rate); ++ printk(loglevel, "\tUpdRate row: %u\n", reut_addr->row.inc_rate); ++ printk(loglevel, "\tUpdRate bank: %u\n", reut_addr->bank.inc_rate); ++ printk(loglevel, "\tUpdRate rank: %u\n", reut_addr->rank.inc_rate); ++ printk(loglevel, "\n"); ++ printk(loglevel, "\tUpdRateCR column: %u\n", reut_seq_addr_inc_ctl.col_addr_update); ++ printk(loglevel, "\tUpdRateCR row: %u\n", reut_seq_addr_inc_ctl.row_addr_update); ++ printk(loglevel, "\tUpdRateCR bank: %u\n", reut_seq_addr_inc_ctl.bank_addr_update); ++ printk(loglevel, "\tUpdRateCR rank: %u\n", reut_seq_addr_inc_ctl.rank_addr_update); ++ printk(loglevel, "\n"); ++ printk(loglevel, "\tUpdInc column: %u\n", reut_seq_addr_inc_ctl.col_addr_increment); ++ printk(loglevel, "\tUpdInc row: %u\n", reut_seq_addr_inc_ctl.row_addr_increment); ++ printk(loglevel, "\tUpdInc bank: %u\n", reut_seq_addr_inc_ctl.bank_addr_increment); ++ printk(loglevel, "\tUpdInc rank: %u\n", reut_seq_addr_inc_ctl.rank_addr_increment); ++ printk(loglevel, "\n"); ++ mchbar_write64(REUT_ch_SEQ_ADDR_INC_CTL(channel), reut_seq_addr_inc_ctl.raw); ++} ++ ++/* ++ * Early steppings take exponential (base 2) loopcount values, ++ * but later steppings take linear loopcount values elsewhere. ++ * Address the differences in register offset and format here. ++ */ ++void program_loop_count(const struct sysinfo *ctrl, const uint8_t channel, const uint8_t lc_exp) ++{ ++ if (ctrl->stepping >= STEPPING_C0) { ++ const uint32_t loopcount = lc_exp >= 32 ? 0 : BIT(lc_exp); ++ mchbar_write32(HSW_REUT_ch_SEQ_LOOP_COUNT(channel), loopcount); ++ } else { ++ const uint8_t loopcount = lc_exp >= 32 ? 0 : lc_exp + 1; ++ union reut_seq_cfg_reg reut_seq_cfg = { ++ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), ++ }; ++ reut_seq_cfg.early_steppings_loop_count = loopcount; ++ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); ++ } ++} ++ ++static inline void write_subseq(const uint8_t channel, const uint8_t idx, const uint32_t ssq) ++{ ++ mchbar_write32(REUT_ch_SUBSEQ_x_CTL(channel, idx), ssq); ++} ++ ++static void program_subseq( ++ struct sysinfo *const ctrl, ++ const uint8_t channel, ++ const enum reut_cmd_pat cmd_pat, ++ const uint32_t ss_a, ++ const uint32_t ss_b) ++{ ++ switch (cmd_pat) { ++ case PAT_WR_RD_TA: ++ write_subseq(channel, 0, ss_a | SUBSEQ_B_WR); ++ for (uint8_t i = 1; i < 7; i++) ++ write_subseq(channel, i, ss_b | SUBSEQ_B_RD_WR); ++ ++ write_subseq(channel, 7, ss_a | SUBSEQ_B_RD); ++ break; ++ case PAT_RD_WR_TA: ++ write_subseq(channel, 0, ss_b | SUBSEQ_B_WR_RD); ++ break; ++ case PAT_ODT_TA: ++ write_subseq(channel, 0, ss_a | SUBSEQ_B_WR); ++ write_subseq(channel, 1, ss_b | SUBSEQ_B_RD_WR); ++ write_subseq(channel, 2, ss_a | SUBSEQ_B_RD); ++ write_subseq(channel, 3, ss_b | SUBSEQ_B_WR_RD); ++ break; ++ default: ++ write_subseq(channel, 0, ss_a | SUBSEQ_B_WR); ++ write_subseq(channel, 1, ss_a | SUBSEQ_B_RD); ++ break; ++ } ++} ++ ++void setup_io_test( ++ struct sysinfo *ctrl, ++ const uint8_t chanmask, ++ const enum reut_cmd_pat cmd_pat, ++ const uint16_t num_cl, ++ const uint8_t lc, ++ const struct reut_box *const reut_addr, ++ const enum test_stop soe, ++ const struct wdb_pat *const pat, ++ const uint8_t en_cadb, ++ const uint8_t subseq_wait) ++{ ++ if (!chanmask) { ++ printk(BIOS_ERR, "\n%s: chanmask is invalid\n", __func__); ++ return; ++ } ++ ++ /* ++ * Prepare variables needed for both channels. ++ * Check for the cases where this MUST be 1: when ++ * we manually walk through subseq ODT and TA Wr. ++ */ ++ uint8_t lc_exp = MAX(lc - log2_ceil(num_cl), 0); ++ if (cmd_pat == PAT_WR_RD_TA || cmd_pat == PAT_ODT_TA) ++ lc_exp = 0; ++ ++ uint8_t num_clcr; ++ if (num_cl > 127) { ++ /* Assume exponential number */ ++ num_clcr = log2_ceil(num_cl); ++ } else { ++ /* Set number of cache lines as linear number */ ++ num_clcr = num_cl | BIT(7); ++ } ++ ++ const uint16_t num_cl2 = 2 * num_cl; ++ uint8_t num_cl2cr; ++ if (num_cl2 > 127) { ++ /* Assume exponential number */ ++ num_cl2cr = log2_ceil(num_cl2); ++ } else { ++ /* Set number of cache lines as linear number */ ++ num_cl2cr = num_cl2 | BIT(7); ++ } ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!(chanmask & BIT(channel))) { ++ union reut_seq_cfg_reg reut_seq_cfg = { ++ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), ++ }; ++ reut_seq_cfg.global_control = 0; ++ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); ++ continue; ++ } ++ ++ /* ++ * Program CADB ++ */ ++ mchbar_write8(REUT_ch_MISC_PAT_CADB_CTRL(channel), !!en_cadb); ++ if (en_cadb) ++ setup_cadb(ctrl, channel, 7, 8); ++ ++ /* ++ * Program sequence ++ */ ++ uint8_t subseq_start = 0; ++ uint8_t subseq_end = 0; ++ switch (cmd_pat) { ++ case PAT_WR_RD: ++ subseq_end = 1; ++ break; ++ case PAT_WR: ++ break; ++ case PAT_RD: ++ subseq_start = 1; ++ subseq_end = 1; ++ break; ++ case PAT_RD_WR_TA: ++ break; ++ case PAT_WR_RD_TA: ++ subseq_end = 7; ++ break; ++ case PAT_ODT_TA: ++ subseq_end = 3; ++ break; ++ default: ++ die("\n%s: Pattern type %u is invalid\n", __func__, cmd_pat); ++ } ++ const union reut_seq_cfg_reg reut_seq_cfg = { ++ .global_control = 1, ++ .initialization_mode = REUT_MODE_TEST, ++ .subsequence_start_pointer = subseq_start, ++ .subsequence_end_pointer = subseq_end, ++ .start_test_delay = 2, ++ }; ++ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); ++ program_loop_count(ctrl, channel, lc_exp); ++ mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { ++ .clear_errors = 1, ++ }.raw); ++ ++ /* ++ * Program subsequences ++ */ ++ uint32_t subseq_a = 0; ++ ++ /* Number of cachelines and scale */ ++ subseq_a |= (num_clcr & 0x00ff) << 0; ++ subseq_a |= (subseq_wait & 0x3fff) << 8; ++ ++ /* Reset current base address to start */ ++ subseq_a |= BIT(27); ++ ++ uint32_t subseq_b = 0; ++ ++ /* Number of cachelines and scale */ ++ subseq_b |= (num_cl2cr & 0x00ff) << 0; ++ subseq_b |= (subseq_wait & 0x3fff) << 8; ++ ++ /* Reset current base address to start */ ++ subseq_b |= BIT(27); ++ ++ program_subseq(ctrl, channel, cmd_pat, subseq_a, subseq_b); ++ ++ /* Program sequence address */ ++ program_seq_addr(channel, reut_addr, false); ++ ++ /* Program WDB */ ++ const bool is_linear = pat->inc_rate < 32; ++ mchbar_write32(REUT_ch_WDB_CL_CTRL(channel), (union reut_pat_wdb_cl_ctrl_reg) { ++ .start_ptr = pat->start_ptr, ++ .end_ptr = pat->stop_ptr, ++ .inc_rate = is_linear ? pat->inc_rate : log2_ceil(pat->inc_rate), ++ .inc_scale = is_linear, ++ }.raw); ++ ++ /* Enable LMN in LMN or CADB modes, used to create lots of supply noise */ ++ const bool use_lmn = pat->dq_pattern == LMN_VA || pat->dq_pattern == CADB; ++ union reut_pat_wdb_cl_mux_cfg_reg pat_wdb_cl_mux_cfg = { ++ .mux_0_control = use_lmn ? REUT_MUX_LMN : REUT_MUX_LFSR, ++ .mux_1_control = REUT_MUX_LFSR, ++ .mux_2_control = REUT_MUX_LFSR, ++ .ecc_data_source_sel = 1, ++ }; ++ ++ /* Program LFSR save/restore, too complex unless everything is power of 2 */ ++ if (cmd_pat == PAT_ODT_TA || cmd_pat == PAT_WR_RD_TA) { ++ pat_wdb_cl_mux_cfg.reload_lfsr_seed_rate = log2_ceil(num_cl) + 1; ++ pat_wdb_cl_mux_cfg.save_lfsr_seed_rate = 1; ++ } ++ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_CFG(channel), pat_wdb_cl_mux_cfg.raw); ++ ++ /* Inversion mask is not used */ ++ mchbar_write32(REUT_ch_PAT_WDB_INV(channel), 0); ++ ++ /* Program error checking */ ++ const union reut_err_ctl_reg reut_err_ctl = { ++ .selective_err_enable_cacheline = 0xff, ++ .selective_err_enable_chunk = 0xff, ++ .stop_on_error_control = soe, ++ .stop_on_nth_error = 1, ++ }; ++ mchbar_write32(REUT_ch_ERR_CONTROL(channel), reut_err_ctl.raw); ++ mchbar_write64(REUT_ch_ERR_DATA_MASK(channel), 0); ++ mchbar_write8(REUT_ch_ERR_ECC_MASK(channel), 0); ++ } ++ ++ /* Always do a ZQ short before the beginning of a test */ ++ reut_issue_zq(ctrl, chanmask, ZQ_SHORT); ++} ++ ++void setup_io_test_cadb( ++ struct sysinfo *ctrl, ++ const uint8_t chanmask, ++ const uint8_t lc, ++ const enum test_stop soe) ++{ ++ const struct reut_box reut_addr = { ++ .rank = { ++ .start = 0, ++ .stop = 0, ++ .inc_rate = 32, ++ .inc_val = 1, ++ }, ++ .bank = { ++ .start = 0, ++ .stop = 7, ++ .inc_rate = 3, ++ .inc_val = 1, ++ }, ++ .row = { ++ .start = 0, ++ .stop = 2047, ++ .inc_rate = 3, ++ .inc_val = 73, ++ }, ++ .col = { ++ .start = 0, ++ .stop = 1023, ++ .inc_rate = 0, ++ .inc_val = 53, ++ }, ++ }; ++ const struct wdb_pat pattern = { ++ .start_ptr = 0, ++ .stop_ptr = 9, ++ .inc_rate = 4, ++ .dq_pattern = CADB, ++ }; ++ setup_io_test( ++ ctrl, ++ chanmask, ++ PAT_WR_RD, ++ 128, ++ lc, ++ &reut_addr, ++ soe, ++ &pattern, ++ 1, ++ 0); ++ ++ ctrl->dq_pat_lc = MAX(lc - 2 - 3, 0) + 1; ++ ctrl->dq_pat = CADB; ++} ++ ++void setup_io_test_basic_va( ++ struct sysinfo *ctrl, ++ const uint8_t chanmask, ++ const uint8_t lc, ++ const enum test_stop soe) ++{ ++ const uint32_t spread = 8; ++ const struct reut_box reut_addr = { ++ .rank = { ++ .start = 0, ++ .stop = 0, ++ .inc_rate = 32, ++ .inc_val = 1, ++ }, ++ .col = { ++ .start = 0, ++ .stop = 1023, ++ .inc_rate = 0, ++ .inc_val = 1, ++ }, ++ }; ++ const struct wdb_pat pattern = { ++ .start_ptr = 0, ++ .stop_ptr = spread - 1, ++ .inc_rate = 4, ++ .dq_pattern = BASIC_VA, ++ }; ++ setup_io_test( ++ ctrl, ++ chanmask, ++ PAT_WR_RD, ++ 128, ++ lc, ++ &reut_addr, ++ soe, ++ &pattern, ++ 0, ++ 0); ++ ++ ctrl->dq_pat_lc = MAX(lc - 8, 0) + 1; ++ ctrl->dq_pat = BASIC_VA; ++} ++ ++void setup_io_test_mpr( ++ struct sysinfo *ctrl, ++ const uint8_t chanmask, ++ const uint8_t lc, ++ const enum test_stop soe) ++{ ++ const struct reut_box reut_addr_ddr = { ++ .rank = { ++ .start = 0, ++ .stop = 0, ++ .inc_rate = 32, ++ .inc_val = 1, ++ }, ++ .col = { ++ .start = 0, ++ .stop = 1023, ++ .inc_rate = 0, ++ .inc_val = 1, ++ }, ++ }; ++ const struct reut_box reut_addr_lpddr = { ++ .bank = { ++ .start = 4, ++ .stop = 4, ++ .inc_rate = 0, ++ .inc_val = 0, ++ }, ++ }; ++ const struct wdb_pat pattern = { ++ .start_ptr = 0, ++ .stop_ptr = 9, ++ .inc_rate = 4, ++ .dq_pattern = BASIC_VA, ++ }; ++ setup_io_test( ++ ctrl, ++ chanmask, ++ PAT_RD, ++ 128, ++ lc, ++ ctrl->lpddr ? &reut_addr_lpddr : &reut_addr_ddr, ++ soe, ++ &pattern, ++ 0, ++ 0); ++ ++ ctrl->dq_pat_lc = 1; ++ ctrl->dq_pat = BASIC_VA; ++} ++ ++uint8_t select_reut_ranks(struct sysinfo *ctrl, const uint8_t channel, uint8_t rankmask) ++{ ++ rankmask &= ctrl->rankmap[channel]; ++ ++ uint8_t rank_count = 0; ++ uint32_t rank_log_to_phys = 0; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_mask(rank, rankmask)) ++ continue; ++ ++ rank_log_to_phys |= rank << (4 * rank_count); ++ rank_count++; ++ } ++ mchbar_write32(REUT_ch_RANK_LOG_TO_PHYS(channel), rank_log_to_phys); ++ ++ union reut_seq_cfg_reg reut_seq_cfg = { ++ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), ++ }; ++ if (!rank_count) { ++ reut_seq_cfg.global_control = 0; ++ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); ++ return 0; ++ } ++ union reut_seq_base_addr_reg reut_seq_addr_stop = { ++ .raw = mchbar_read64(REUT_ch_SEQ_ADDR_WRAP(channel)), ++ }; ++ reut_seq_addr_stop.rank_addr = rank_count - 1; ++ mchbar_write64(REUT_ch_SEQ_ADDR_WRAP(channel), reut_seq_addr_stop.raw); ++ ++ reut_seq_cfg.global_control = 1; ++ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); ++ return BIT(channel); ++} ++ ++void run_mpr_io_test(const bool clear_errors) ++{ ++ io_reset(); ++ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { ++ .start_test = 1, ++ .clear_errors = clear_errors, ++ }.raw); ++ tick_delay(2); ++ io_reset(); ++ tick_delay(2); ++ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { ++ .stop_test = 1, ++ }.raw); ++} ++ ++static uint8_t get_num_tests(const uint8_t dq_pat) ++{ ++ switch (dq_pat) { ++ case SEGMENT_WDB: return 4; ++ case CADB: return 7; ++ case TURN_AROUND_WR: return 8; ++ case TURN_AROUND_ODT: return 4; ++ case RD_RD_TA: return 2; ++ case RD_RD_TA_ALL: return 8; ++ default: return 1; ++ } ++} ++ ++uint8_t run_io_test( ++ struct sysinfo *const ctrl, ++ const uint8_t chanmask, ++ const uint8_t dq_pat, ++ const bool clear_errors) ++{ ++ /* SEGMENT_WDB only runs 4 tests */ ++ const uint8_t segment_wdb_lc[4] = { 0, 0, 4, 2 }; ++ const union reut_pat_wdb_cl_ctrl_reg pat_wdb_cl[4] = { ++ [0] = { ++ .start_ptr = 0, ++ .end_ptr = 9, ++ .inc_rate = 25, ++ .inc_scale = SCALE_LINEAR, ++ }, ++ [1] = { ++ .start_ptr = 0, ++ .end_ptr = 9, ++ .inc_rate = 25, ++ .inc_scale = SCALE_LINEAR, ++ }, ++ [2] = { ++ .start_ptr = 10, ++ .end_ptr = 63, ++ .inc_rate = 19, ++ .inc_scale = SCALE_LINEAR, ++ }, ++ [3] = { ++ .start_ptr = 10, ++ .end_ptr = 63, ++ .inc_rate = 10, ++ .inc_scale = SCALE_LINEAR, ++ }, ++ }; ++ const bool is_turnaround = dq_pat == RD_RD_TA || dq_pat == RD_RD_TA_ALL; ++ const uint8_t num_tests = get_num_tests(dq_pat); ++ union tc_bank_rank_a_reg tc_bank_rank_a[NUM_CHANNELS] = { 0 }; ++ if (is_turnaround) { ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!(chanmask & BIT(channel))) ++ continue; ++ ++ tc_bank_rank_a[channel].raw = ctrl->tc_bankrank_a[channel].raw; ++ } ++ } ++ for (uint8_t t = 0; t < num_tests; t++) { ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!(chanmask & BIT(channel))) ++ continue; ++ ++ if (dq_pat == SEGMENT_WDB) { ++ mchbar_write32(REUT_ch_WDB_CL_CTRL(channel), pat_wdb_cl[t].raw); ++ /* ++ * Skip programming LFSR save/restore. Too complex ++ * unless power of 2. Program desired loopcount. ++ */ ++ const uint8_t pat_lc = ctrl->dq_pat_lc + segment_wdb_lc[t]; ++ program_loop_count(ctrl, channel, pat_lc); ++ } else if (dq_pat == CADB) { ++ setup_cadb(ctrl, channel, num_tests, t); ++ } else if (dq_pat == TURN_AROUND_WR || dq_pat == TURN_AROUND_ODT) { ++ union reut_seq_cfg_reg reut_seq_cfg = { ++ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), ++ }; ++ reut_seq_cfg.subsequence_start_pointer = t; ++ reut_seq_cfg.subsequence_end_pointer = t; ++ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); ++ union reut_seq_addr_inc_ctl_reg addr_inc_ctl = { ++ .raw = mchbar_read64(REUT_ch_SEQ_ADDR_INC_CTL(channel)), ++ }; ++ uint8_t ta_inc_rate = 1; ++ if (dq_pat == TURN_AROUND_WR && (t == 0 || t == 7)) ++ ta_inc_rate = 0; ++ else if (dq_pat == TURN_AROUND_ODT && (t == 0 || t == 2)) ++ ta_inc_rate = 0; ++ ++ /* Program increment rate as linear value */ ++ addr_inc_ctl.rank_addr_update = BIT(7) | ta_inc_rate; ++ addr_inc_ctl.col_addr_update = BIT(7) | ta_inc_rate; ++ mchbar_write64(REUT_ch_SEQ_ADDR_INC_CTL(channel), ++ addr_inc_ctl.raw); ++ } else if (dq_pat == RD_RD_TA) { ++ tc_bank_rank_a[channel].tRDRD_sr = (t == 0) ? 4 : 5; ++ mchbar_write32(TC_BANK_RANK_A_ch(channel), ++ tc_bank_rank_a[channel].raw); ++ } else if (dq_pat == RD_RD_TA_ALL) { ++ /* ++ * Program tRDRD for SR and DR. Run 8 tests, covering ++ * tRDRD_sr = 4, 5, 6, 7 and tRDRD_dr = min, +1, +2, +3 ++ */ ++ const uint32_t tRDRD_dr = ctrl->tc_bankrank_a[channel].tRDRD_dr; ++ tc_bank_rank_a[channel].tRDRD_sr = (t % 4) + 4; ++ tc_bank_rank_a[channel].tRDRD_dr = (t % 4) + tRDRD_dr; ++ mchbar_write32(TC_BANK_RANK_A_ch(channel), ++ tc_bank_rank_a[channel].raw); ++ ++ /* Program linear rank increment rate */ ++ union reut_seq_addr_inc_ctl_reg addr_inc_ctl = { ++ .raw = mchbar_read64(REUT_ch_SEQ_ADDR_INC_CTL(channel)), ++ }; ++ addr_inc_ctl.rank_addr_update = BIT(7) | (t / 4) ? 0 : 31; ++ mchbar_write64(REUT_ch_SEQ_ADDR_INC_CTL(channel), ++ addr_inc_ctl.raw); ++ } ++ } ++ bool test_soe = false; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!(chanmask & BIT(channel))) ++ continue; ++ ++ const union reut_err_ctl_reg reut_err_ctl = { ++ .raw = mchbar_read32(REUT_ch_ERR_CONTROL(channel)), ++ }; ++ const uint8_t soe = reut_err_ctl.stop_on_error_control; ++ if (soe != NSOE) { ++ test_soe = true; ++ break; ++ } ++ } ++ io_reset(); ++ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { ++ .start_test = 1, ++ .clear_errors = clear_errors && t == 0, ++ }.raw); ++ struct mono_time prev, curr; ++ timer_monotonic_get(&prev); ++ union reut_global_err_reg global_err; ++ do { ++ global_err.raw = mchbar_read32(REUT_GLOBAL_ERR); ++ /** TODO: Clean up this mess **/ ++ timer_monotonic_get(&curr); ++ if (mono_time_diff_microseconds(&prev, &curr) > 1000 * 1000) { ++ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { ++ .stop_test = 1, ++ }.raw); ++ printk(BIOS_ERR, "REUT timed out, ch_done: %x\n", ++ global_err.ch_test_done); ++ break; ++ } ++ } while ((global_err.ch_test_done & chanmask) != chanmask); ++ if (test_soe && global_err.ch_error & chanmask) ++ break; ++ } ++ if (is_turnaround) { ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!(chanmask & BIT(channel))) ++ continue; ++ ++ mchbar_write32(TC_BANK_RANK_A_ch(channel), ++ ctrl->tc_bankrank_a[channel].raw); ++ } ++ } ++ return ((union reut_global_err_reg)mchbar_read32(REUT_GLOBAL_ERR)).ch_error; ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index f8408e51a0..817a9f8bf8 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -94,20 +94,35 @@ + #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) + #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) + ++#define REUT_ch_PAT_WDB_CL_MUX_CFG(ch) _MCMAIN_C(0x4040, ch) ++ + #define REUT_ch_PAT_WDB_CL_MUX_WR_x(ch, x) _MCMAIN_C_X(0x4048, ch, x) /* x in 0 .. 2 */ + #define REUT_ch_PAT_WDB_CL_MUX_RD_x(ch, x) _MCMAIN_C_X(0x4054, ch, x) /* x in 0 .. 2 */ + + #define REUT_ch_PAT_WDB_CL_MUX_LMN(ch) _MCMAIN_C(0x4078, ch) + ++#define REUT_ch_PAT_WDB_INV(ch) _MCMAIN_C(0x4084, ch) ++ ++#define REUT_ch_ERR_CONTROL(ch) _MCMAIN_C(0x4098, ch) ++#define REUT_ch_ERR_ECC_MASK(ch) _MCMAIN_C(0x409c, ch) ++ + #define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) + ++#define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch) ++ + #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) + ++#define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch) + #define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch) ++#define REUT_ch_PAT_CADB_MUX_CTRL(ch) _MCMAIN_C(0x41a0, ch) ++#define REUT_ch_PAT_CADB_MUX_x(ch, x) _MCMAIN_C_X(0x41a4, ch, x) /* x in 0 .. 2 */ + ++#define REUT_ch_PAT_CADB_CL_MUX_LMN(ch) _MCMAIN_C(0x41b0, ch) + #define REUT_ch_PAT_CADB_WRITE_PTR(ch) _MCMAIN_C(0x41bc, ch) + #define REUT_ch_PAT_CADB_PROG(ch) _MCMAIN_C(0x41c0, ch) + ++#define REUT_ch_WDB_CL_CTRL(ch) _MCMAIN_C(0x4200, ch) ++ + #define TC_ZQCAL_ch(ch) _MCMAIN_C(0x4290, ch) + #define TC_RFP_ch(ch) _MCMAIN_C(0x4294, ch) + #define TC_RFTP_ch(ch) _MCMAIN_C(0x4298, ch) +@@ -119,12 +134,27 @@ + #define QCLK_ch_LDAT_SDAT(ch) _MCMAIN_C(0x42d4, ch) + #define QCLK_ch_LDAT_DATA_IN_x(ch, x) _MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */ + ++#define REUT_GLOBAL_CTL 0x4800 + #define REUT_GLOBAL_ERR 0x4804 + ++#define REUT_ch_SUBSEQ_x_CTL(ch, x) (0x4808 + 40 * (ch) + 4 * (x)) ++ + #define REUT_ch_SEQ_CFG(ch) (0x48a8 + 8 * (ch)) + + #define REUT_ch_SEQ_CTL(ch) (0x48b8 + 4 * (ch)) + ++#define REUT_ch_SEQ_ADDR_START(ch) (0x48d8 + 8 * (ch)) ++ ++#define REUT_ch_SEQ_ADDR_WRAP(ch) (0x48e8 + 8 * (ch)) ++ ++#define REUT_ch_SEQ_MISC_CTL(ch) (0x4908 + 4 * (ch)) ++ ++#define REUT_ch_SEQ_ADDR_INC_CTL(ch) (0x4910 + 8 * (ch)) ++ ++#define REUT_ch_RANK_LOG_TO_PHYS(ch) (0x4930 + 4 * (ch)) /* 4 bits per rank */ ++ ++#define HSW_REUT_ch_SEQ_LOOP_COUNT(ch) (0x4980 + 4 * (ch)) /* *** only on C0 *** */ ++ + /* MCMAIN broadcast */ + #define MCSCHEDS_CBIT 0x4c20 + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0038-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch b/config/coreboot/default/patches/0038-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch deleted file mode 100644 index 7c96d9f9..00000000 --- a/config/coreboot/default/patches/0038-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch +++ /dev/null @@ -1,147 +0,0 @@ -From 762f5d95d2314c3d09c1562d36d111dcdb9c8b93 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Fri, 3 May 2024 11:03:32 -0600 -Subject: [PATCH 38/38] ec/dell/mec5035: Add S3 suspend SMI handler - -This is necessary for S3 resume to work on SNB and newer Dell Latitude -laptops. If a command isn't sent, the EC cuts power to the DIMMs, -preventing the system from resuming. These commands were found using an -FPGA to log all LPC bus transactions between the host and the EC and -then narrowing down which ones were actually necessary. - -Interestingly, the command IDs appear to be identical to those in -ec/google/wilco, the EC used on Dell Latitude Chromebooks, and that EC -implements a similar S3 SMI handler as the one implemented in this -commit. The Wilco EC Kconfig does suggest that its firmware is a -modified version of Dell's usual Latitude EC firmware, so the -similarities seem to be intentional. - -These similarities also identified a command to enable or disable wake -sources like the power button and lid switch, and this was added to the -SMI handler to disable lid wake as the system does not yet resume -properly from a like wake with coreboot. - -Tested on the Latitude E6430 (Ivy Bridge) and the Precision M6800 -(Haswell, not yet pushed). - -Change-Id: I655868aba46911d128f6c24f410dc6fdf83f3070 -Signed-off-by: Nicholas Chin ---- - src/ec/dell/mec5035/Makefile.mk | 1 + - src/ec/dell/mec5035/mec5035.c | 14 ++++++++++++++ - src/ec/dell/mec5035/mec5035.h | 22 ++++++++++++++++++++++ - src/ec/dell/mec5035/smihandler.c | 17 +++++++++++++++++ - 4 files changed, 54 insertions(+) - create mode 100644 src/ec/dell/mec5035/smihandler.c - -diff --git a/src/ec/dell/mec5035/Makefile.mk b/src/ec/dell/mec5035/Makefile.mk -index 4ebdd811f9..be557e4599 100644 ---- a/src/ec/dell/mec5035/Makefile.mk -+++ b/src/ec/dell/mec5035/Makefile.mk -@@ -5,5 +5,6 @@ ifeq ($(CONFIG_EC_DELL_MEC5035),y) - bootblock-y += mec5035.c - romstage-y += mec5035.c - ramstage-y += mec5035.c -+smm-y += mec5035.c smihandler.c - - endif -diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c -index dffbb7960c..85c2ab0140 100644 ---- a/src/ec/dell/mec5035/mec5035.c -+++ b/src/ec/dell/mec5035/mec5035.c -@@ -94,6 +94,20 @@ void mec5035_control_radio(enum ec_radio_dev dev, enum ec_radio_state state) - ec_command(CMD_RADIO_CTRL); - } - -+void mec5035_change_wake(u8 source, enum ec_wake_change change) -+{ -+ u8 buf[ACPI_WAKEUP_NUM_ARGS] = {change, source, 0, 0x40}; -+ write_mailbox_regs(buf, 2, ACPI_WAKEUP_NUM_ARGS); -+ ec_command(CMD_ACPI_WAKEUP_CHANGE); -+} -+ -+void mec5035_sleep_enable(void) -+{ -+ u8 buf[SLEEP_EN_NUM_ARGS] = {3, 0}; -+ write_mailbox_regs(buf, 2, SLEEP_EN_NUM_ARGS); -+ ec_command(CMD_SLEEP_ENABLE); -+} -+ - void mec5035_early_init(void) - { - /* If this isn't sent the EC shuts down the system after about 15 -diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h -index 32f791cb01..8d4fded28b 100644 ---- a/src/ec/dell/mec5035/mec5035.h -+++ b/src/ec/dell/mec5035/mec5035.h -@@ -4,12 +4,15 @@ - #define _EC_DELL_MEC5035_H_ - - #include -+#include - - #define NUM_REGISTERS 32 - - enum mec5035_cmd { - CMD_MOUSE_TP = 0x1a, - CMD_RADIO_CTRL = 0x2b, -+ CMD_ACPI_WAKEUP_CHANGE = 0x4a, -+ CMD_SLEEP_ENABLE = 0x64, - CMD_CPU_OK = 0xc2, - }; - -@@ -33,9 +36,28 @@ enum ec_radio_state { - RADIO_ON - }; - -+#define ACPI_WAKEUP_NUM_ARGS 4 -+enum ec_wake_change { -+ WAKE_OFF = 0, -+ WAKE_ON -+}; -+ -+/* Copied from ec/google/wilco/commands.h. Not sure if these all apply */ -+enum ec_acpi_wake_events { -+ EC_ACPI_WAKE_PWRB = BIT(0), /* Wake up by power button */ -+ EC_ACPI_WAKE_LID = BIT(1), /* Wake up by lid switch */ -+ EC_ACPI_WAKE_RTC = BIT(5), /* Wake up by RTC */ -+}; -+ -+#define SLEEP_EN_NUM_ARGS 2 -+ - u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting); - void mec5035_cpu_ok(void); - void mec5035_early_init(void); - void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state); -+void mec5035_change_wake(u8 source, enum ec_wake_change change); -+void mec5035_sleep_enable(void); -+ -+void mec5035_smi_sleep(int slp_type); - - #endif /* _EC_DELL_MEC5035_H_ */ -diff --git a/src/ec/dell/mec5035/smihandler.c b/src/ec/dell/mec5035/smihandler.c -new file mode 100644 -index 0000000000..958733bf97 ---- /dev/null -+++ b/src/ec/dell/mec5035/smihandler.c -@@ -0,0 +1,17 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+#include -+#include "mec5035.h" -+ -+void mec5035_smi_sleep(int slp_type) -+{ -+ switch (slp_type) { -+ case ACPI_S3: -+ /* System does not yet resume properly if woken by lid */ -+ mec5035_change_wake(EC_ACPI_WAKE_LID, WAKE_OFF); -+ mec5035_sleep_enable(); -+ break; -+ } -+} --- -2.47.0 - diff --git a/config/coreboot/default/patches/0038-haswell-NRI-Add-range-tracking-library.patch b/config/coreboot/default/patches/0038-haswell-NRI-Add-range-tracking-library.patch new file mode 100644 index 00000000..45fdc951 --- /dev/null +++ b/config/coreboot/default/patches/0038-haswell-NRI-Add-range-tracking-library.patch @@ -0,0 +1,222 @@ +From 36b206a88281796458e6ebc30fe34a7c51c86548 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 00:56:00 +0200 +Subject: [PATCH 38/51] haswell NRI: Add range tracking library + +Implement a small library used to keep track of passing ranges. This +will be used by 1D training algorithms when margining some parameter. + +Change-Id: I8718e85165160afd7c0c8e730b5ce6c9c00f8a60 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../intel/haswell/native_raminit/ranges.c | 109 ++++++++++++++++++ + .../intel/haswell/native_raminit/ranges.h | 68 +++++++++++ + 3 files changed, 178 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/ranges.c + create mode 100644 src/northbridge/intel/haswell/native_raminit/ranges.h + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index 6e1b365602..2da950771d 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -9,6 +9,7 @@ romstage-y += io_comp_control.c + romstage-y += memory_map.c + romstage-y += raminit_main.c + romstage-y += raminit_native.c ++romstage-y += ranges.c + romstage-y += reut.c + romstage-y += setup_wdb.c + romstage-y += spd_bitmunching.c +diff --git a/src/northbridge/intel/haswell/native_raminit/ranges.c b/src/northbridge/intel/haswell/native_raminit/ranges.c +new file mode 100644 +index 0000000000..cdebc1fa66 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/ranges.c +@@ -0,0 +1,109 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++ ++#include "ranges.h" ++ ++void linear_record_pass( ++ struct linear_train_data *const data, ++ const bool pass, ++ const int32_t value, ++ const int32_t start, ++ const int32_t step) ++{ ++ /* If this is the first time, initialize all values */ ++ if (value == start) { ++ /* ++ * If value passed, create a zero-length region for the current value, ++ * which may be extended as long as the successive values are passing. ++ * ++ * Otherwise, create a zero-length range for the preceding value. This ++ * range cannot be extended by other passing values, which is desired. ++ */ ++ data->current.start = start - (pass ? 0 : step); ++ data->current.end = data->current.start; ++ data->largest = data->current; ++ } else if (pass) { ++ /* If this pass is not contiguous, it belongs to a new region */ ++ if (data->current.end != (value - step)) ++ data->current.start = value; ++ ++ /* Update end of current region */ ++ data->current.end = value; ++ ++ /* Update largest region */ ++ if (range_width(data->current) > range_width(data->largest)) ++ data->largest = data->current; ++ } ++} ++ ++void phase_record_pass( ++ struct phase_train_data *const data, ++ const bool pass, ++ const int32_t value, ++ const int32_t start, ++ const int32_t step) ++{ ++ /* If this is the first time, initialize all values */ ++ if (value == start) { ++ /* ++ * If value passed, create a zero-length region for the current value, ++ * which may be extended as long as the successive values are passing. ++ * ++ * Otherwise, create a zero-length range for the preceding value. This ++ * range cannot be extended by other passing values, which is desired. ++ */ ++ data->current.start = start - (pass ? 0 : step); ++ data->current.end = data->current.start; ++ data->largest = data->current; ++ data->initial = data->current; ++ return; ++ } ++ if (!pass) ++ return; ++ ++ /* Update initial region */ ++ if (data->initial.end == (value - step)) ++ data->initial.end = value; ++ ++ /* If this pass is not contiguous, it belongs to a new region */ ++ if (data->current.end != (value - step)) ++ data->current.start = value; ++ ++ /* Update end of current region */ ++ data->current.end = value; ++ ++ /* Update largest region */ ++ if (range_width(data->current) > range_width(data->largest)) ++ data->largest = data->current; ++} ++ ++void phase_append_initial_to_current( ++ struct phase_train_data *const data, ++ const int32_t start, ++ const int32_t step) ++{ ++ /* If initial region is valid and does not overlap, append it */ ++ if (data->initial.start == start && data->initial.end != data->current.end) ++ data->current.end += step + range_width(data->initial); ++ ++ /* Update largest region */ ++ if (range_width(data->current) > range_width(data->largest)) ++ data->largest = data->current; ++} ++ ++void phase_append_current_to_initial( ++ struct phase_train_data *const data, ++ const int32_t start, ++ const int32_t step) ++{ ++ /* If initial region is valid and does not overlap, append it */ ++ if (data->initial.start == start && data->initial.end != data->current.end) { ++ data->initial.start -= (step + range_width(data->current)); ++ data->current = data->initial; ++ } ++ ++ /* Update largest region */ ++ if (range_width(data->current) > range_width(data->largest)) ++ data->largest = data->current; ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/ranges.h b/src/northbridge/intel/haswell/native_raminit/ranges.h +new file mode 100644 +index 0000000000..235392df96 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/ranges.h +@@ -0,0 +1,68 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#ifndef HASWELL_RAMINIT_RANGES_H ++#define HASWELL_RAMINIT_RANGES_H ++ ++#include ++ ++/* ++ * Many algorithms shmoo some parameter to determine the largest passing ++ * range. Provide a common implementation to avoid redundant boilerplate. ++ */ ++struct passing_range { ++ int32_t start; ++ int32_t end; ++}; ++ ++/* Structure for linear parameters, such as roundtrip delays */ ++struct linear_train_data { ++ struct passing_range current; ++ struct passing_range largest; ++}; ++ ++/* ++ * Phase ranges are "circular": the first and last indices are contiguous. ++ * To correctly determine the largest passing range, one has to combine ++ * the initial range and the current range when processing the last index. ++ */ ++struct phase_train_data { ++ struct passing_range initial; ++ struct passing_range current; ++ struct passing_range largest; ++}; ++ ++static inline int32_t range_width(const struct passing_range range) ++{ ++ return range.end - range.start; ++} ++ ++static inline int32_t range_center(const struct passing_range range) ++{ ++ return range.start + range_width(range) / 2; ++} ++ ++void linear_record_pass( ++ struct linear_train_data *data, ++ bool pass, ++ int32_t value, ++ int32_t start, ++ int32_t step); ++ ++void phase_record_pass( ++ struct phase_train_data *data, ++ bool pass, ++ int32_t value, ++ int32_t start, ++ int32_t step); ++ ++void phase_append_initial_to_current( ++ struct phase_train_data *data, ++ int32_t start, ++ int32_t step); ++ ++void phase_append_current_to_initial( ++ struct phase_train_data *data, ++ int32_t start, ++ int32_t step); ++ ++#endif +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0039-haswell-NRI-Add-library-to-change-margins.patch b/config/coreboot/default/patches/0039-haswell-NRI-Add-library-to-change-margins.patch new file mode 100644 index 00000000..401433ac --- /dev/null +++ b/config/coreboot/default/patches/0039-haswell-NRI-Add-library-to-change-margins.patch @@ -0,0 +1,294 @@ +From 926b1af1033c26ad231587fd3a4506efb4b0d8a3 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 01:11:03 +0200 +Subject: [PATCH 39/51] haswell NRI: Add library to change margins + +Implement a library to change Rx/Tx margins. It will be expanded later. + +Change-Id: I0b55aba428d8b4d4e16d2fbdec57235ce3ce8adf +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/change_margin.c | 154 ++++++++++++++++++ + .../haswell/native_raminit/raminit_native.h | 50 ++++++ + .../intel/haswell/registers/mchbar.h | 9 + + 4 files changed, 214 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/change_margin.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index 2da950771d..ebe9e9b762 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -1,5 +1,6 @@ + ## SPDX-License-Identifier: GPL-2.0-or-later + ++romstage-y += change_margin.c + romstage-y += configure_mc.c + romstage-y += ddr3.c + romstage-y += jedec_reset.c +diff --git a/src/northbridge/intel/haswell/native_raminit/change_margin.c b/src/northbridge/intel/haswell/native_raminit/change_margin.c +new file mode 100644 +index 0000000000..055c666eee +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/change_margin.c +@@ -0,0 +1,154 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++void update_rxt( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const uint8_t rank, ++ const uint8_t byte, ++ const enum rxt_subfield subfield, ++ const int32_t value) ++{ ++ union ddr_data_rx_train_rank_reg rxt = { ++ .rcven = ctrl->rcven[channel][rank][byte], ++ .dqs_p = ctrl->rxdqsp[channel][rank][byte], ++ .rx_eq = ctrl->rx_eq[channel][rank][byte], ++ .dqs_n = ctrl->rxdqsn[channel][rank][byte], ++ .vref = ctrl->rxvref[channel][rank][byte], ++ }; ++ int32_t new_value; ++ switch (subfield) { ++ case RXT_RCVEN: ++ new_value = clamp_s32(0, value, 511); ++ rxt.rcven = new_value; ++ break; ++ case RXT_RXDQS_P: ++ new_value = clamp_s32(0, value, 63); ++ rxt.dqs_p = new_value; ++ break; ++ case RXT_RX_EQ: ++ new_value = clamp_s32(0, value, 31); ++ rxt.rx_eq = new_value; ++ break; ++ case RXT_RXDQS_N: ++ new_value = clamp_s32(0, value, 63); ++ rxt.dqs_n = new_value; ++ break; ++ case RXT_RX_VREF: ++ new_value = clamp_s32(-32, value, 31); ++ rxt.vref = new_value; ++ break; ++ case RXT_RXDQS_BOTH: ++ new_value = clamp_s32(0, value, 63); ++ rxt.dqs_p = new_value; ++ rxt.dqs_n = new_value; ++ break; ++ case RXT_RESTORE: ++ new_value = value; ++ break; ++ default: ++ die("%s: Unhandled subfield index %u\n", __func__, subfield); ++ } ++ ++ if (new_value != value) { ++ printk(BIOS_ERR, "%s: Overflow for subfield %u: %d ---> %d\n", ++ __func__, subfield, value, new_value); ++ } ++ mchbar_write32(RX_TRAIN_ch_r_b(channel, rank, byte), rxt.raw); ++ download_regfile(ctrl, channel, false, rank, REG_FILE_USE_RANK, byte, true, false); ++} ++ ++void update_txt( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const uint8_t rank, ++ const uint8_t byte, ++ const enum txt_subfield subfield, ++ const int32_t value) ++{ ++ union ddr_data_tx_train_rank_reg txt = { ++ .dq_delay = ctrl->tx_dq[channel][rank][byte], ++ .dqs_delay = ctrl->txdqs[channel][rank][byte], ++ .tx_eq = ctrl->tx_eq[channel][rank][byte], ++ }; ++ int32_t new_value; ++ switch (subfield) { ++ case TXT_TX_DQ: ++ new_value = clamp_s32(0, value, 511); ++ txt.dq_delay = new_value; ++ break; ++ case TXT_TXDQS: ++ new_value = clamp_s32(0, value, 511); ++ txt.dqs_delay = new_value; ++ break; ++ case TXT_TX_EQ: ++ new_value = clamp_s32(0, value, 63); ++ txt.tx_eq = new_value; ++ break; ++ case TXT_DQDQS_OFF: ++ new_value = value; ++ txt.dqs_delay += new_value; ++ txt.dq_delay += new_value; ++ break; ++ case TXT_RESTORE: ++ new_value = value; ++ break; ++ default: ++ die("%s: Unhandled subfield index %u\n", __func__, subfield); ++ } ++ if (new_value != value) { ++ printk(BIOS_ERR, "%s: Overflow for subfield %u: %d ---> %d\n", ++ __func__, subfield, value, new_value); ++ } ++ mchbar_write32(TX_TRAIN_ch_r_b(channel, rank, byte), txt.raw); ++ download_regfile(ctrl, channel, false, rank, REG_FILE_USE_RANK, byte, false, true); ++} ++ ++void download_regfile( ++ struct sysinfo *ctrl, ++ const uint8_t channel, ++ const bool multicast, ++ const uint8_t rank, ++ const enum regfile_mode regfile, ++ const uint8_t byte, ++ const bool read_rf_rd, ++ const bool read_rf_wr) ++{ ++ union reut_seq_base_addr_reg reut_seq_base_addr; ++ switch (regfile) { ++ case REG_FILE_USE_START: ++ reut_seq_base_addr.raw = mchbar_read64(REUT_ch_SEQ_ADDR_START(channel)); ++ break; ++ case REG_FILE_USE_CURRENT: ++ reut_seq_base_addr.raw = mchbar_read64(REUT_ch_SEQ_ADDR_CURRENT(channel)); ++ break; ++ case REG_FILE_USE_RANK: ++ reut_seq_base_addr.raw = 0; ++ if (rank >= NUM_SLOTRANKS) ++ die("%s: bad rank %u\n", __func__, rank); ++ break; ++ default: ++ die("%s: Invalid regfile param %u\n", __func__, regfile); ++ } ++ uint8_t phys_rank = rank; ++ if (reut_seq_base_addr.raw != 0) { ++ /* Map REUT logical rank to physical rank */ ++ const uint32_t log_to_phys = mchbar_read32(REUT_ch_RANK_LOG_TO_PHYS(channel)); ++ phys_rank = log_to_phys >> (reut_seq_base_addr.rank_addr * 4) & 0x3; ++ } ++ uint32_t reg = multicast ? DDR_DATA_ch_CONTROL_0(channel) : DQ_CONTROL_0(channel, byte); ++ union ddr_data_control_0_reg ddr_data_control_0 = { ++ .raw = mchbar_read32(reg), ++ }; ++ ddr_data_control_0.read_rf_rd = read_rf_rd; ++ ddr_data_control_0.read_rf_wr = read_rf_wr; ++ ddr_data_control_0.read_rf_rank = phys_rank; ++ mchbar_write32(reg, ddr_data_control_0.raw); ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index f029e7f076..8707257b27 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -118,6 +118,30 @@ enum test_stop { + ALSOE = 3, /* Stop on all lanes error */ + }; + ++enum rxt_subfield { ++ RXT_RCVEN = 0, ++ RXT_RXDQS_P = 1, ++ RXT_RX_EQ = 2, ++ RXT_RXDQS_N = 3, ++ RXT_RX_VREF = 4, ++ RXT_RXDQS_BOTH = 5, ++ RXT_RESTORE = 255, ++}; ++ ++enum txt_subfield { ++ TXT_TX_DQ = 0, ++ TXT_TXDQS = 1, ++ TXT_TX_EQ = 2, ++ TXT_DQDQS_OFF = 3, ++ TXT_RESTORE = 255, ++}; ++ ++enum regfile_mode { ++ REG_FILE_USE_RANK, /* Used when changing parameters for each rank */ ++ REG_FILE_USE_START, /* Used when changing parameters before the test */ ++ REG_FILE_USE_CURRENT, /* Used when changing parameters after the test */ ++}; ++ + struct wdb_pat { + uint32_t start_ptr; /* Starting pointer in WDB */ + uint32_t stop_ptr; /* Stopping pointer in WDB */ +@@ -451,6 +475,32 @@ uint8_t select_reut_ranks(struct sysinfo *ctrl, uint8_t channel, uint8_t rankmas + void run_mpr_io_test(bool clear_errors); + uint8_t run_io_test(struct sysinfo *ctrl, uint8_t chanmask, uint8_t dq_pat, bool clear_errors); + ++void update_rxt( ++ struct sysinfo *ctrl, ++ uint8_t channel, ++ uint8_t rank, ++ uint8_t byte, ++ enum rxt_subfield subfield, ++ int32_t value); ++ ++void update_txt( ++ struct sysinfo *ctrl, ++ uint8_t channel, ++ uint8_t rank, ++ uint8_t byte, ++ enum txt_subfield subfield, ++ int32_t value); ++ ++void download_regfile( ++ struct sysinfo *ctrl, ++ uint8_t channel, ++ bool multicast, ++ uint8_t rank, ++ enum regfile_mode regfile, ++ uint8_t byte, ++ bool read_rf_rd, ++ bool read_rf_wr); ++ + uint8_t get_rx_bias(const struct sysinfo *ctrl); + + uint8_t get_tCWL(uint32_t mem_clock_mhz); +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 817a9f8bf8..a81559bb1e 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -15,7 +15,11 @@ + /* Register definitions */ + + /* DDR DATA per-channel per-bytelane */ ++#define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte) ++#define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte) ++ + #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) ++#define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) + + /* DDR CKE per-channel */ + #define DDR_CKE_ch_CMD_COMP_OFFSET(ch) _DDRIO_C_R_B(0x1204, ch, 0, 0) +@@ -38,6 +42,9 @@ + #define DDR_SCRAMBLE_ch(ch) (0x2000 + 4 * (ch)) + #define DDR_SCRAM_MISC_CONTROL 0x2008 + ++/* DDR DATA per-channel multicast */ ++#define DDR_DATA_ch_CONTROL_0(ch) _DDRIO_C_R_B(0x3074, ch, 0, 0) ++ + /* DDR CMDN/CMDS per-channel (writes go to both CMDN and CMDS fubs) */ + #define DDR_CMD_ch_COMP_OFFSET(ch) _DDRIO_C_R_B(0x3204, ch, 0, 0) + #define DDR_CMD_ch_PI_CODING(ch) _DDRIO_C_R_B(0x3208, ch, 0, 0) +@@ -147,6 +154,8 @@ + + #define REUT_ch_SEQ_ADDR_WRAP(ch) (0x48e8 + 8 * (ch)) + ++#define REUT_ch_SEQ_ADDR_CURRENT(ch) (0x48f8 + 8 * (ch)) ++ + #define REUT_ch_SEQ_MISC_CTL(ch) (0x4908 + 4 * (ch)) + + #define REUT_ch_SEQ_ADDR_INC_CTL(ch) (0x4910 + 8 * (ch)) +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0039-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch b/config/coreboot/default/patches/0039-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch deleted file mode 100644 index 2b5173c5..00000000 --- a/config/coreboot/default/patches/0039-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch +++ /dev/null @@ -1,55 +0,0 @@ -From b24c5caf5a8f63555d3b71e7a786c822a4c262cc Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Sat, 4 May 2024 02:00:53 +0100 -Subject: [PATCH 39/65] nb/haswell: lock policy regs when disabling IOMMU - -Angel Pons told me I should do it. See comments here: -https://review.coreboot.org/c/coreboot/+/81016 - -I see no harm in complying with the request. I'll merge -this into the main patch at a later date and try to -get this upstreamed. - -Just a reminder: on Optiplex 9020 variants, Xorg locks up -under Linux when tested with a graphics card; disabling -IOMMU works around the issue. Intel graphics work just fine -with IOMMU turned on. Libreboot disables IOMMU by default, -on the 9020, so that users can install graphics cards easily. - -Signed-off-by: Leah Rowe ---- - src/northbridge/intel/haswell/early_init.c | 15 +++++++-------- - 1 file changed, 7 insertions(+), 8 deletions(-) - -diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c -index 1a7e0b1076..e9506ee830 100644 ---- a/src/northbridge/intel/haswell/early_init.c -+++ b/src/northbridge/intel/haswell/early_init.c -@@ -160,17 +160,16 @@ static void haswell_setup_iommu(void) - const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A); - u8 enable_iommu = get_uint_option("iommu", 1); - -- if (!enable_iommu) -- return; -- - if (capid0_a & VTD_DISABLE) - return; - -- /* Setup BARs: zeroize top 32 bits; set enable bit */ -- mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32); -- mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1); -- mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32); -- mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1); -+ if (enable_iommu) { -+ /* Setup BARs: zeroize top 32 bits; set enable bit */ -+ mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32); -+ mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1); -+ mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32); -+ mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1); -+ } - - /* Set L3HIT2PEND_DIS, lock GFXVTBAR policy config registers */ - u32 reg32; --- -2.39.5 - diff --git a/config/coreboot/default/patches/0040-haswell-NRI-Add-RcvEn-training.patch b/config/coreboot/default/patches/0040-haswell-NRI-Add-RcvEn-training.patch new file mode 100644 index 00000000..a40ffa69 --- /dev/null +++ b/config/coreboot/default/patches/0040-haswell-NRI-Add-RcvEn-training.patch @@ -0,0 +1,708 @@ +From 61435822eb1d65b919bec45076737ce4ea91e1b1 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 00:05:41 +0200 +Subject: [PATCH 40/51] haswell NRI: Add RcvEn training + +Implement the RcvEn (Receive Enable) calibration procedure. + +Change-Id: Ifbfa520f3e0486c56d0988ce67af2ddb9cf29888 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/raminit_main.c | 1 + + .../haswell/native_raminit/raminit_native.h | 14 + + .../haswell/native_raminit/reg_structs.h | 13 + + .../native_raminit/train_receive_enable.c | 561 ++++++++++++++++++ + .../intel/haswell/registers/mchbar.h | 3 + + 6 files changed, 593 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/train_receive_enable.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index ebe9e9b762..e2fbfb4211 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -16,3 +16,4 @@ romstage-y += setup_wdb.c + romstage-y += spd_bitmunching.c + romstage-y += testing_io.c + romstage-y += timings_refresh.c ++romstage-y += train_receive_enable.c +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 5e4674957d..7d444659c3 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = { + { configure_memory_map, true, "MEMMAP", }, + { do_jedec_init, true, "JEDECINIT", }, + { pre_training, true, "PRETRAIN", }, ++ { train_receive_enable, true, "RCVET", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 8707257b27..eaaaedad1e 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -43,6 +43,9 @@ + #define NUM_WDB_CL_MUX_SEEDS 3 + #define NUM_CADB_MUX_SEEDS 3 + ++/* Specified in PI ticks. 64 PI ticks == 1 qclk */ ++#define tDQSCK_DRIFT 64 ++ + /* ZQ calibration types */ + enum { + ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ +@@ -189,6 +192,7 @@ enum raminit_status { + RAMINIT_STATUS_MPLL_INIT_FAILURE, + RAMINIT_STATUS_POLL_TIMEOUT, + RAMINIT_STATUS_REUT_ERROR, ++ RAMINIT_STATUS_RCVEN_FAILURE, + RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ + }; + +@@ -271,6 +275,10 @@ struct sysinfo { + + union ddr_data_vref_adjust_reg dimm_vref; + ++ uint8_t io_latency[NUM_CHANNELS][NUM_SLOTRANKS]; ++ uint8_t rt_latency[NUM_CHANNELS][NUM_SLOTRANKS]; ++ uint32_t rt_io_comp[NUM_CHANNELS]; ++ + uint32_t data_offset_train[NUM_CHANNELS][NUM_LANES]; + uint32_t data_offset_comp[NUM_CHANNELS][NUM_LANES]; + +@@ -345,6 +353,11 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl) + memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); + } + ++static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint8_t byte) ++{ ++ return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte)); ++} ++ + /* Number of ticks to wait in units of 69.841279 ns (citation needed) */ + static inline void tick_delay(const uint32_t delay) + { +@@ -400,6 +413,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl); + enum raminit_status configure_mc(struct sysinfo *ctrl); + enum raminit_status configure_memory_map(struct sysinfo *ctrl); + enum raminit_status do_jedec_init(struct sysinfo *ctrl); ++enum raminit_status train_receive_enable(struct sysinfo *ctrl); + + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +index b943259b91..b099f4bb82 100644 +--- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -297,6 +297,19 @@ union ddr_scram_misc_control_reg { + uint32_t raw; + }; + ++union sc_io_latency_reg { ++ struct __packed { ++ uint32_t iolat_rank0 : 4; // Bits 3:0 ++ uint32_t iolat_rank1 : 4; // Bits 7:4 ++ uint32_t iolat_rank2 : 4; // Bits 11:8 ++ uint32_t iolat_rank3 : 4; // Bits 15:12 ++ uint32_t rt_iocomp : 6; // Bits 21:16 ++ uint32_t : 9; // Bits 30:22 ++ uint32_t dis_rt_clk_gate : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ + union mcscheds_cbit_reg { + struct __packed { + uint32_t dis_opp_cas : 1; // Bits 0:0 +diff --git a/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c +new file mode 100644 +index 0000000000..576c6bc21e +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c +@@ -0,0 +1,561 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++#include "ranges.h" ++ ++#define RCVEN_PLOT RAM_DEBUG ++ ++static enum raminit_status change_rcven_timing(struct sysinfo *ctrl, const uint8_t channel) ++{ ++ int16_t max_rcven = -4096; ++ int16_t min_rcven = 4096; ++ int16_t max_rcven_rank[NUM_SLOTRANKS]; ++ int16_t min_rcven_rank[NUM_SLOTRANKS]; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ max_rcven_rank[rank] = max_rcven; ++ min_rcven_rank[rank] = min_rcven; ++ } ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ int16_t new_rcven = ctrl->rcven[channel][rank][byte]; ++ new_rcven -= ctrl->io_latency[channel][rank] * 64; ++ if (max_rcven_rank[rank] < new_rcven) ++ max_rcven_rank[rank] = new_rcven; ++ ++ if (min_rcven_rank[rank] > new_rcven) ++ min_rcven_rank[rank] = new_rcven; ++ } ++ if (max_rcven < max_rcven_rank[rank]) ++ max_rcven = max_rcven_rank[rank]; ++ ++ if (min_rcven > min_rcven_rank[rank]) ++ min_rcven = min_rcven_rank[rank]; ++ } ++ ++ /* ++ * Determine how far we are from the ideal center point for RcvEn timing. ++ * (PiIdeal - AveRcvEn) / 64 is the ideal number of cycles we should have ++ * for IO latency. command training will reduce this by 64, so plan for ++ * that now in the ideal value. Round to closest integer. ++ */ ++ const int16_t rre_pi_ideal = 256 + 64; ++ const int16_t pi_reserve = 64; ++ const int16_t rcven_center = (max_rcven + min_rcven) / 2; ++ const int8_t iolat_target = DIV_ROUND_CLOSEST(rre_pi_ideal - rcven_center, 64); ++ ++ int8_t io_g_offset = 0; ++ int8_t io_lat[NUM_SLOTRANKS] = { 0 }; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ io_lat[rank] = iolat_target; ++ ++ /* Check for RcvEn underflow/overflow */ ++ const int16_t rcven_lower = 64 * io_lat[rank] + min_rcven_rank[rank]; ++ if (rcven_lower < pi_reserve) ++ io_lat[rank] += DIV_ROUND_UP(pi_reserve - rcven_lower, 64); ++ ++ const int16_t rcven_upper = 64 * io_lat[rank] + max_rcven_rank[rank]; ++ if (rcven_upper > 511 - pi_reserve) ++ io_lat[rank] -= DIV_ROUND_UP(rcven_upper - (511 - pi_reserve), 64); ++ ++ /* Check for IO latency over/underflow */ ++ if (io_lat[rank] - io_g_offset > 14) ++ io_g_offset = io_lat[rank] - 14; ++ ++ if (io_lat[rank] - io_g_offset < 1) ++ io_g_offset = io_lat[rank] - 1; ++ ++ const int8_t cycle_offset = io_lat[rank] - ctrl->io_latency[channel][rank]; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ ctrl->rcven[channel][rank][byte] += 64 * cycle_offset; ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ } ++ } ++ ++ /* Calculate new IO comp latency */ ++ union sc_io_latency_reg sc_io_lat = { ++ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)), ++ }; ++ ++ /* Check if we are underflowing or overflowing this field */ ++ if (io_g_offset < 0 && sc_io_lat.rt_iocomp < -io_g_offset) { ++ printk(BIOS_ERR, "%s: IO COMP underflow\n", __func__); ++ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset); ++ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp); ++ return RAMINIT_STATUS_RCVEN_FAILURE; ++ } ++ if (io_g_offset > 0 && io_g_offset > 0x3f - sc_io_lat.rt_iocomp) { ++ printk(BIOS_ERR, "%s: IO COMP overflow\n", __func__); ++ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset); ++ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp); ++ return RAMINIT_STATUS_RCVEN_FAILURE; ++ } ++ sc_io_lat.rt_iocomp += io_g_offset; ++ ctrl->rt_io_comp[channel] = sc_io_lat.rt_iocomp; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (ctrl->rankmap[channel] & BIT(rank)) ++ ctrl->io_latency[channel][rank] = io_lat[rank] - io_g_offset; ++ ++ const uint8_t shift = rank * 4; ++ sc_io_lat.raw &= ~(0xf << shift); ++ sc_io_lat.raw |= ctrl->io_latency[channel][rank] << shift; ++ } ++ mchbar_write32(SC_IO_LATENCY_ch(channel), sc_io_lat.raw); ++ return RAMINIT_STATUS_SUCCESS; ++} ++ ++#define RL_START (256 + 24) ++#define RL_STOP (384 + 24) ++#define RL_STEP 8 ++ ++#define RE_NUM_SAMPLES 6 ++ ++static enum raminit_status verify_high_region(const int32_t center, const int32_t lwidth) ++{ ++ if (center > RL_STOP) { ++ /* Check if center of high was found where it should be */ ++ printk(BIOS_ERR, "RcvEn: Center of high (%d) higher than expected\n", center); ++ return RAMINIT_STATUS_RCVEN_FAILURE; ++ } ++ if (lwidth <= 32) { ++ /* Check if width is large enough */ ++ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too small\n", lwidth); ++ return RAMINIT_STATUS_RCVEN_FAILURE; ++ } ++ if (lwidth >= 96) { ++ /* Since we're calibrating a phase, a too large region is a problem */ ++ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too large\n", lwidth); ++ return RAMINIT_STATUS_RCVEN_FAILURE; ++ } ++ return RAMINIT_STATUS_SUCCESS; ++} ++ ++static void program_io_latency(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank) ++{ ++ const uint8_t shift = rank * 4; ++ const uint8_t iolat = ctrl->io_latency[channel][rank]; ++ mchbar_clrsetbits32(SC_IO_LATENCY_ch(channel), 0xf << shift, iolat << shift); ++} ++ ++static void program_rl_delays(struct sysinfo *ctrl, const uint8_t rank, const uint16_t rl_delay) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ update_rxt(ctrl, channel, rank, byte, RXT_RCVEN, rl_delay); ++ } ++} ++ ++static bool sample_dqs(const uint8_t channel, const uint8_t byte) ++{ ++ return (get_data_train_feedback(channel, byte) & 0x1ff) >= BIT(RE_NUM_SAMPLES - 1); ++} ++ ++enum raminit_status train_receive_enable(struct sysinfo *ctrl) ++{ ++ const struct reut_box reut_addr = { ++ .col = { ++ .start = 0, ++ .stop = 1023, ++ .inc_rate = 0, ++ .inc_val = 1, ++ }, ++ }; ++ const struct wdb_pat wdb_pattern = { ++ .start_ptr = 0, ++ .stop_ptr = 9, ++ .inc_rate = 32, ++ .dq_pattern = BASIC_VA, ++ }; ++ ++ const uint16_t bytemask = BIT(ctrl->lanes) - 1; ++ const uint8_t fine_step = 1; ++ ++ const uint8_t rt_delta = is_hsw_ult() ? 4 : 2; ++ const uint8_t rt_io_comp = 21 + rt_delta; ++ const uint8_t rt_latency = 16 + rt_delta; ++ setup_io_test( ++ ctrl, ++ ctrl->chanmap, ++ PAT_RD, ++ 2, ++ RE_NUM_SAMPLES + 1, ++ &reut_addr, ++ 0, ++ &wdb_pattern, ++ 0, ++ 8); ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ union ddr_data_control_2_reg data_control_2 = { ++ .raw = ctrl->dq_control_2[channel][byte], ++ }; ++ data_control_2.force_rx_on = 1; ++ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); ++ } ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ if (ctrl->lpddr) { ++ /** ++ * W/A for b4618574 - @todo: remove for HSW ULT C0 ++ * Can't have force_odt_on together with leaker, disable LPDDR ++ * mode during this training step. lpddr_mode is restored ++ * at the end of this function from the host structure. ++ */ ++ data_control_0.lpddr_mode = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ } ++ data_control_0.force_odt_on = 1; ++ data_control_0.rl_training_mode = 1; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ mchbar_write32(SC_IO_LATENCY_ch(channel), (union sc_io_latency_reg) { ++ .rt_iocomp = rt_io_comp, ++ }.raw); ++ } ++ enum raminit_status status = RAMINIT_STATUS_SUCCESS; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!does_rank_exist(ctrl, rank)) ++ continue; ++ ++ /* ++ * Set initial roundtrip latency values. Assume -4 QCLK for worst board ++ * layout. This is calculated as HW_ROUNDT_LAT_DEFAULT_VALUE plus: ++ * ++ * DDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + N-mode value * 2 ++ * LPDDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + tDQSCK_max ++ * ++ * N-mode is 3 during training mode. Both channels use the same timings. ++ */ ++ /** TODO: differs for LPDDR **/ ++ const uint32_t tmp = MAX(ctrl->multiplier, 4) + 5 + 2 * ctrl->tAA; ++ const uint32_t initial_rt_latency = MIN(rt_latency + tmp, 0x3f); ++ ++ uint8_t chanmask = 0; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ chanmask |= select_reut_ranks(ctrl, channel, BIT(rank)); ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ ctrl->io_latency[channel][rank] = 0; ++ mchbar_write8(SC_ROUNDT_LAT_ch(channel) + rank, initial_rt_latency); ++ ctrl->rt_latency[channel][rank] = initial_rt_latency; ++ } ++ ++ printk(BIOS_DEBUG, "Rank %u\n", rank); ++ printk(BIOS_DEBUG, "Steps 1 and 2: Find middle of high region\n"); ++ printk(RCVEN_PLOT, "Byte"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RCVEN_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(RCVEN_PLOT, "%u ", byte); ++ } ++ printk(RCVEN_PLOT, "\nRcvEn\n"); ++ struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; ++ for (uint16_t rl_delay = RL_START; rl_delay < RL_STOP; rl_delay += RL_STEP) { ++ printk(RCVEN_PLOT, " % 3d", rl_delay); ++ program_rl_delays(ctrl, rank, rl_delay); ++ run_io_test(ctrl, chanmask, BASIC_VA, true); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RCVEN_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const bool high = sample_dqs(channel, byte); ++ printk(RCVEN_PLOT, high ? ". " : "# "); ++ phase_record_pass( ++ ®ion_data[channel][byte], ++ high, ++ rl_delay, ++ RL_START, ++ RL_STEP); ++ } ++ } ++ printk(RCVEN_PLOT, "\n"); ++ } ++ printk(RCVEN_PLOT, "\n"); ++ printk(BIOS_DEBUG, "Update RcvEn timing to be in the center of high region\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\n", ++ channel, rank); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ struct phase_train_data *const curr_data = ++ ®ion_data[channel][byte]; ++ phase_append_current_to_initial(curr_data, RL_START, RL_STEP); ++ const int32_t lwidth = range_width(curr_data->largest); ++ const int32_t center = range_center(curr_data->largest); ++ printk(BIOS_DEBUG, " B%u: \t%d\t%d\t%d\t%d\n", ++ byte, ++ curr_data->largest.start, ++ curr_data->largest.end, ++ lwidth, ++ center); ++ ++ status = verify_high_region(center, lwidth); ++ if (status) { ++ printk(BIOS_ERR, ++ "RcvEn problems on channel %u, byte %u\n", ++ channel, byte); ++ goto clean_up; ++ } ++ ctrl->rcven[channel][rank][byte] = center; ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ ++ printk(BIOS_DEBUG, "Step 3: Quarter preamble - Walk backwards\n"); ++ printk(RCVEN_PLOT, "Byte"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RCVEN_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(RCVEN_PLOT, "%u ", byte); ++ } ++ printk(RCVEN_PLOT, "\nIOLAT\n"); ++ bool done = false; ++ while (!done) { ++ run_io_test(ctrl, chanmask, BASIC_VA, true); ++ done = true; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RCVEN_PLOT, " %2u\t", ctrl->io_latency[channel][rank]); ++ uint16_t highs = 0; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const bool high = sample_dqs(channel, byte); ++ printk(RCVEN_PLOT, high ? "H " : "L "); ++ if (high) ++ highs |= BIT(byte); ++ } ++ if (!highs) ++ continue; ++ ++ done = false; ++ ++ /* If all bytes sample high, adjust timing globally */ ++ if (highs == bytemask && ctrl->io_latency[channel][rank] < 14) { ++ ctrl->io_latency[channel][rank] += 2; ++ ctrl->io_latency[channel][rank] %= 16; ++ program_io_latency(ctrl, channel, rank); ++ continue; ++ } ++ ++ /* Otherwise, adjust individual bytes */ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ if (!(highs & BIT(byte))) ++ continue; ++ ++ if (ctrl->rcven[channel][rank][byte] < 128) { ++ printk(BIOS_ERR, ++ "RcvEn underflow: walking backwards\n"); ++ printk(BIOS_ERR, ++ "For channel %u, rank %u, byte %u\n", ++ channel, rank, byte); ++ status = RAMINIT_STATUS_RCVEN_FAILURE; ++ goto clean_up; ++ } ++ ctrl->rcven[channel][rank][byte] -= 128; ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ } ++ } ++ printk(RCVEN_PLOT, "\n"); ++ } ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "\nC%u: Preamble\n", channel); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ printk(BIOS_DEBUG, ++ " B%u: %u\n", byte, ctrl->rcven[channel][rank][byte]); ++ } ++ } ++ printk(BIOS_DEBUG, "\n"); ++ ++ printk(BIOS_DEBUG, "Step 4: Add 1 qclk\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ ctrl->rcven[channel][rank][byte] += 64; ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ } ++ } ++ printk(BIOS_DEBUG, "\n"); ++ ++ printk(BIOS_DEBUG, "Step 5: Walk forward to find rising edge\n"); ++ printk(RCVEN_PLOT, "Byte"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RCVEN_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(RCVEN_PLOT, "%u ", byte); ++ } ++ printk(RCVEN_PLOT, "\n inc\n"); ++ uint16_t ch_result[NUM_CHANNELS] = { 0 }; ++ uint8_t inc_preamble[NUM_CHANNELS][NUM_LANES] = { 0 }; ++ for (uint8_t inc = 0; inc < 64; inc += fine_step) { ++ printk(RCVEN_PLOT, " %2u\t", inc); ++ run_io_test(ctrl, chanmask, BASIC_VA, true); ++ done = true; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ if (ch_result[channel] & BIT(byte)) { ++ /* Skip bytes that are already done */ ++ printk(RCVEN_PLOT, ". "); ++ continue; ++ } ++ const bool pass = sample_dqs(channel, byte); ++ printk(RCVEN_PLOT, pass ? ". " : "# "); ++ if (pass) { ++ ch_result[channel] |= BIT(byte); ++ continue; ++ } ++ ctrl->rcven[channel][rank][byte] += fine_step; ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ inc_preamble[channel][byte] = inc; ++ } ++ printk(RCVEN_PLOT, "\t"); ++ if (ch_result[channel] != bytemask) ++ done = false; ++ } ++ printk(RCVEN_PLOT, "\n"); ++ if (done) ++ break; ++ } ++ printk(BIOS_DEBUG, "\n"); ++ if (!done) { ++ printk(BIOS_ERR, "Error: Preamble edge not found for all bytes\n"); ++ printk(BIOS_ERR, "The final RcvEn results are as follows:\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(BIOS_ERR, "Channel %u Rank %u: preamble\n", ++ channel, rank); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ printk(BIOS_ERR, " Byte %u: %u%s\n", byte, ++ ctrl->rcven[channel][rank][byte], ++ (ch_result[channel] ^ bytemask) & BIT(byte) ++ ? "" ++ : " *** Check this byte! ***"); ++ } ++ } ++ status = RAMINIT_STATUS_RCVEN_FAILURE; ++ goto clean_up; ++ } ++ ++ printk(BIOS_DEBUG, "Step 6: center on preamble and clean up rank\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "C%u: Preamble increment\n", channel); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ /* ++ * For Traditional, pull in RcvEn by 64. For ULT, take the DQS ++ * drift into account to the specified guardband: tDQSCK_DRIFT. ++ */ ++ ctrl->rcven[channel][rank][byte] -= tDQSCK_DRIFT; ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ printk(BIOS_DEBUG, " B%u: %u %u\n", byte, ++ ctrl->rcven[channel][rank][byte], ++ inc_preamble[channel][byte]); ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ ++clean_up: ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ if (ctrl->lpddr) { ++ /** ++ * W/A for b4618574 - @todo: remove for HSW ULT C0 ++ * Can't have force_odt_on together with leaker, disable LPDDR mode for ++ * this training step. This write will disable force_odt_on while still ++ * keeping LPDDR mode disabled. Second write will restore LPDDR mode. ++ */ ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.lpddr_mode = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ } ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ mchbar_write32(DQ_CONTROL_2(channel, byte), ++ ctrl->dq_control_2[channel][byte]); ++ } ++ } ++ io_reset(); ++ if (status) ++ return status; ++ ++ printk(BIOS_DEBUG, "Step 7: Sync IO latency across all ranks\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ status = change_rcven_timing(ctrl, channel); ++ if (status) ++ return status; ++ } ++ printk(BIOS_DEBUG, "\nFinal Receive Enable and IO latency settings:\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ const union sc_io_latency_reg sc_io_latency = { ++ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)), ++ }; ++ printk(BIOS_DEBUG, " C%u.R%u: IOLAT = %u rt_iocomp = %u\n", channel, ++ rank, ctrl->io_latency[channel][rank], sc_io_latency.rt_iocomp); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ printk(BIOS_DEBUG, " B%u: %u\n", byte, ++ ctrl->rcven[channel][rank][byte]); ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ } ++ return status; ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index a81559bb1e..9172d4f2b0 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -18,6 +18,8 @@ + #define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte) + #define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte) + ++#define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) ++ + #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) + #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) + +@@ -100,6 +102,7 @@ + #define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch) + #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) + #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) ++#define SC_IO_LATENCY_ch(ch) _MCMAIN_C(0x4028, ch) + + #define REUT_ch_PAT_WDB_CL_MUX_CFG(ch) _MCMAIN_C(0x4040, ch) + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0040-nb-intel-gm45-Make-DDR2-raminit-work.patch b/config/coreboot/default/patches/0040-nb-intel-gm45-Make-DDR2-raminit-work.patch deleted file mode 100644 index a75edd47..00000000 --- a/config/coreboot/default/patches/0040-nb-intel-gm45-Make-DDR2-raminit-work.patch +++ /dev/null @@ -1,223 +0,0 @@ -From c41e97f85f2a2677c742d62e3080af7cfeb2ef23 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Mon, 10 May 2021 22:40:59 +0200 -Subject: [PATCH 40/65] nb/intel/gm45: Make DDR2 raminit work - -List of changes: - - Update some timing and ODT values - - Patch RCOMP calibration to better match what MRC binaries do - - Replay a hardcoded list of RCOMP codes after RcvEn - -This makes raminit work at DDR2-800 speeds and fixes S3 resume as well. -Tested on Toshiba Satellite A300-1ME with two 2 GiB DDR2-800 SO-DIMMs. - -Change-Id: Ibaee524b8ff652ddadd66cb0eb680401b988ff7c -Signed-off-by: Angel Pons ---- - src/northbridge/intel/gm45/gm45.h | 2 +- - src/northbridge/intel/gm45/raminit.c | 90 +++++++++++++++++-- - .../intel/gm45/raminit_rcomp_calibration.c | 27 ++++-- - 3 files changed, 106 insertions(+), 13 deletions(-) - -diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h -index 5d9ac56606..338260ea7a 100644 ---- a/src/northbridge/intel/gm45/gm45.h -+++ b/src/northbridge/intel/gm45/gm45.h -@@ -420,7 +420,7 @@ void igd_compute_ggc(sysinfo_t *const sysinfo); - int raminit_read_vco_index(void); - u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank); - --void raminit_rcomp_calibration(stepping_t stepping); -+void raminit_rcomp_calibration(int ddr_type, stepping_t stepping); - void raminit_reset_readwrite_pointers(void); - void raminit_receive_enable_calibration(int ddr_type, const timings_t *, const dimminfo_t *); - void raminit_write_training(const mem_clock_t, const dimminfo_t *, int s3resume); -diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c -index b7e013959a..df8f46fbbc 100644 ---- a/src/northbridge/intel/gm45/raminit.c -+++ b/src/northbridge/intel/gm45/raminit.c -@@ -1047,7 +1047,7 @@ static void rcomp_initialization(const int spd_type, const stepping_t stepping, - } - - /* Perform RCOMP calibration for DDR3. */ -- raminit_rcomp_calibration(stepping); -+ raminit_rcomp_calibration(spd_type, stepping); - - /* Run initial RCOMP. */ - mchbar_setbits32(0x418, 1 << 17); -@@ -1117,7 +1117,7 @@ static void dram_program_timings(const int spd_type, const timings_t *const timi - reg = (reg & ~(0xf << 10)) | (2 << 10); - else - reg = (reg & ~(0xf << 10)) | (3 << 10); -- reg = (reg & ~(0x7 << 5)) | (3 << 5); -+ reg = (reg & ~(0x7 << 5)) | (2 << 5); - } else if (timings->mem_clock != MEM_CLOCK_1067MT) { - reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15); - reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10); -@@ -1286,11 +1286,11 @@ static void ddr2_odt_setup(const timings_t *const timings, const int sff) - reg = (reg & ~(0xf << (44 - 32))) | (8 << (44 - 32)); - reg = (reg & ~(0xf << (40 - 32))) | (7 << (40 - 32)); - if (timings->mem_clock == MEM_CLOCK_667MT) { -- reg = (reg & ~(0xf << (36 - 32))) | (4 << (36 - 32)); -- reg = (reg & ~(0xf << (32 - 32))) | (4 << (32 - 32)); -+ reg = (reg & ~(0xf << (36 - 32))) | (8 << (36 - 32)); -+ reg = (reg & ~(0xf << (32 - 32))) | (8 << (32 - 32)); - } else { -- reg = (reg & ~(0xf << (36 - 32))) | (5 << (36 - 32)); -- reg = (reg & ~(0xf << (32 - 32))) | (5 << (32 - 32)); -+ reg = (reg & ~(0xf << (36 - 32))) | (9 << (36 - 32)); -+ reg = (reg & ~(0xf << (32 - 32))) | (9 << (32 - 32)); - } - mchbar_write32(CxODT_HIGH(ch), reg); - -@@ -2209,6 +2209,84 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume) - raminit_write_training(timings->mem_clock, dimms, s3resume); - } - -+ /* -+ * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done -+ * after receiver enable calibration, otherwise raminit sometimes -+ * completes with non-working memory. -+ */ -+ mchbar_write32(0x0530, 0x06060005); -+ mchbar_write32(0x0680, 0x06060606); -+ mchbar_write32(0x0684, 0x08070606); -+ mchbar_write32(0x0688, 0x0e0e0c0a); -+ mchbar_write32(0x068c, 0x0e0e0e0e); -+ mchbar_write32(0x0698, 0x06060606); -+ mchbar_write32(0x069c, 0x08070606); -+ mchbar_write32(0x06a0, 0x0c0c0b0a); -+ mchbar_write32(0x06a4, 0x0c0c0c0c); -+ -+ mchbar_write32(0x06c0, 0x02020202); -+ mchbar_write32(0x06c4, 0x03020202); -+ mchbar_write32(0x06c8, 0x04040403); -+ mchbar_write32(0x06cc, 0x04040404); -+ mchbar_write32(0x06d8, 0x02020202); -+ mchbar_write32(0x06dc, 0x03020202); -+ mchbar_write32(0x06e0, 0x04040403); -+ mchbar_write32(0x06e4, 0x04040404); -+ -+ mchbar_write32(0x0700, 0x02020202); -+ mchbar_write32(0x0704, 0x03020202); -+ mchbar_write32(0x0708, 0x04040403); -+ mchbar_write32(0x070c, 0x04040404); -+ mchbar_write32(0x0718, 0x02020202); -+ mchbar_write32(0x071c, 0x03020202); -+ mchbar_write32(0x0720, 0x04040403); -+ mchbar_write32(0x0724, 0x04040404); -+ -+ mchbar_write32(0x0740, 0x02020202); -+ mchbar_write32(0x0744, 0x03020202); -+ mchbar_write32(0x0748, 0x04040403); -+ mchbar_write32(0x074c, 0x04040404); -+ mchbar_write32(0x0758, 0x02020202); -+ mchbar_write32(0x075c, 0x03020202); -+ mchbar_write32(0x0760, 0x04040403); -+ mchbar_write32(0x0764, 0x04040404); -+ -+ mchbar_write32(0x0780, 0x06060606); -+ mchbar_write32(0x0784, 0x09070606); -+ mchbar_write32(0x0788, 0x0e0e0c0b); -+ mchbar_write32(0x078c, 0x0e0e0e0e); -+ mchbar_write32(0x0798, 0x06060606); -+ mchbar_write32(0x079c, 0x09070606); -+ mchbar_write32(0x07a0, 0x0d0d0c0b); -+ mchbar_write32(0x07a4, 0x0d0d0d0d); -+ -+ mchbar_write32(0x07c0, 0x06060606); -+ mchbar_write32(0x07c4, 0x09070606); -+ mchbar_write32(0x07c8, 0x0e0e0c0b); -+ mchbar_write32(0x07cc, 0x0e0e0e0e); -+ mchbar_write32(0x07d8, 0x06060606); -+ mchbar_write32(0x07dc, 0x09070606); -+ mchbar_write32(0x07e0, 0x0d0d0c0b); -+ mchbar_write32(0x07e4, 0x0d0d0d0d); -+ -+ mchbar_write32(0x0840, 0x06060606); -+ mchbar_write32(0x0844, 0x08070606); -+ mchbar_write32(0x0848, 0x0e0e0c0a); -+ mchbar_write32(0x084c, 0x0e0e0e0e); -+ mchbar_write32(0x0858, 0x06060606); -+ mchbar_write32(0x085c, 0x08070606); -+ mchbar_write32(0x0860, 0x0c0c0b0a); -+ mchbar_write32(0x0864, 0x0c0c0c0c); -+ -+ mchbar_write32(0x0880, 0x02020202); -+ mchbar_write32(0x0884, 0x03020202); -+ mchbar_write32(0x0888, 0x04040403); -+ mchbar_write32(0x088c, 0x04040404); -+ mchbar_write32(0x0898, 0x02020202); -+ mchbar_write32(0x089c, 0x03020202); -+ mchbar_write32(0x08a0, 0x04040403); -+ mchbar_write32(0x08a4, 0x04040404); -+ - igd_compute_ggc(sysinfo); - - /* Program final memory map (with real values). */ -diff --git a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c -index aef863f05a..b74765fd9c 100644 ---- a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c -+++ b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c -@@ -161,11 +161,13 @@ static void lookup_and_write(const int a1step, - mchbar += 4; - } - } --void raminit_rcomp_calibration(const stepping_t stepping) { -+void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) { - const int a1step = stepping >= STEPPING_CONVERSION_A1; - - int i; - -+ char magic_comp[2] = {0}; -+ - enum { - PULL_UP = 0, - PULL_DOWN = 1, -@@ -196,6 +198,10 @@ void raminit_rcomp_calibration(const stepping_t stepping) { - reg = mchbar_read32(0x518); - lut_idx[channel][group][PULL_UP] = (reg >> 24) & 0x7f; - lut_idx[channel][group][PULL_DOWN] = (reg >> 16) & 0x7f; -+ if (i == 1) { -+ magic_comp[0] = (reg >> 8) & 0x3f; -+ magic_comp[1] = (reg >> 0) & 0x3f; -+ } - } - /* Cleanup? */ - mchbar_setbits32(0x400, 1 << 3); -@@ -216,13 +222,19 @@ void raminit_rcomp_calibration(const stepping_t stepping) { - for (channel = 0; channel < 2; ++channel) { - for (group = 0; group < 6; ++group) { - for (pu_pd = PULL_DOWN; pu_pd >= PULL_UP; --pu_pd) { -- lookup_and_write( -- a1step, -- lut_idx[channel][group][pu_pd] - 7, -- ddr3_lookup_schedule[group][pu_pd], -- mchbar); -+ if (ddr_type == DDR3) { -+ lookup_and_write( -+ a1step, -+ lut_idx[channel][group][pu_pd] - 7, -+ ddr3_lookup_schedule[group][pu_pd], -+ mchbar); -+ } - mchbar += 0x0018; - } -+ if (ddr_type == DDR2) { -+ mchbar_clrsetbits32(mchbar + 0, 0x7f << 24, lut_idx[channel][group][PULL_DOWN] << 24); -+ mchbar_clrsetbits32(mchbar + 4, 0x7f << 0, lut_idx[channel][group][PULL_UP] << 0); -+ } - mchbar += 0x0010; - /* Channel B knows only the first two groups. */ - if ((1 == channel) && (1 == group)) -@@ -230,4 +242,7 @@ void raminit_rcomp_calibration(const stepping_t stepping) { - } - mchbar += 0x0040; - } -+ -+ mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26); -+ mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20); - } --- -2.39.5 - diff --git a/config/coreboot/default/patches/0041-haswell-NRI-Add-function-to-change-margins.patch b/config/coreboot/default/patches/0041-haswell-NRI-Add-function-to-change-margins.patch new file mode 100644 index 00000000..296dbed6 --- /dev/null +++ b/config/coreboot/default/patches/0041-haswell-NRI-Add-function-to-change-margins.patch @@ -0,0 +1,272 @@ +From fc6c3edf561dd11eeb2ebe7f4cb93542e664935a Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 11:58:59 +0200 +Subject: [PATCH 41/51] haswell NRI: Add function to change margins + +Implement a function to change margin parameters. Haswell provides a +register to apply an offset to margin parameters during training, so +make use of it. There are other margin parameters that have not been +implemented yet, as they are not needed for now and special handling +is needed to provide offset training functionality. + +Change-Id: I5392380e13de3c44e77b7bc9f3b819e2661d1e2d +Signed-off-by: Angel Pons +--- + .../haswell/native_raminit/change_margin.c | 136 ++++++++++++++++++ + .../haswell/native_raminit/raminit_native.h | 39 +++++ + .../haswell/native_raminit/reg_structs.h | 12 ++ + .../intel/haswell/registers/mchbar.h | 1 + + 4 files changed, 188 insertions(+) + +diff --git a/src/northbridge/intel/haswell/native_raminit/change_margin.c b/src/northbridge/intel/haswell/native_raminit/change_margin.c +index 055c666eee..299c44a6b0 100644 +--- a/src/northbridge/intel/haswell/native_raminit/change_margin.c ++++ b/src/northbridge/intel/haswell/native_raminit/change_margin.c +@@ -1,5 +1,6 @@ + /* SPDX-License-Identifier: GPL-2.0-or-later */ + ++#include + #include + #include + #include +@@ -152,3 +153,138 @@ void download_regfile( + ddr_data_control_0.read_rf_rank = phys_rank; + mchbar_write32(reg, ddr_data_control_0.raw); + } ++ ++static void update_data_offset_train( ++ struct sysinfo *ctrl, ++ const uint8_t param, ++ const uint8_t en_multicast, ++ const uint8_t channel_in, ++ const uint8_t rank, ++ const uint8_t byte_in, ++ const bool update_ctrl, ++ const enum regfile_mode regfile, ++ const uint32_t value) ++{ ++ bool is_rd = false; ++ bool is_wr = false; ++ switch (param) { ++ case RdT: ++ case RdV: ++ case RcvEna: ++ is_rd = true; ++ break; ++ case WrT: ++ case WrDqsT: ++ is_wr = true; ++ break; ++ default: ++ die("%s: Invalid margin parameter %u\n", __func__, param); ++ } ++ if (en_multicast) { ++ mchbar_write32(DDR_DATA_OFFSET_TRAIN, value); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ download_regfile(ctrl, channel, true, rank, regfile, 0, is_rd, is_wr); ++ if (update_ctrl) { ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ ctrl->data_offset_train[channel][byte] = value; ++ } ++ } ++ } else { ++ mchbar_write32(DDR_DATA_OFFSET_TRAIN_ch_b(channel_in, byte_in), value); ++ download_regfile(ctrl, channel_in, false, rank, regfile, byte_in, is_rd, is_wr); ++ if (update_ctrl) ++ ctrl->data_offset_train[channel_in][byte_in] = value; ++ } ++} ++ ++static uint32_t get_max_margin(const enum margin_parameter param) ++{ ++ switch (param) { ++ case RcvEna: ++ case RdT: ++ case WrT: ++ case WrDqsT: ++ return MAX_POSSIBLE_TIME; ++ case RdV: ++ return MAX_POSSIBLE_VREF; ++ default: ++ die("%s: Invalid margin parameter %u\n", __func__, param); ++ } ++} ++ ++void change_margin( ++ struct sysinfo *ctrl, ++ const enum margin_parameter param, ++ const int32_t value0, ++ const bool en_multicast, ++ const uint8_t channel, ++ const uint8_t rank, ++ const uint8_t byte, ++ const bool update_ctrl, ++ const enum regfile_mode regfile) ++{ ++ /** FIXME: Remove this **/ ++ if (rank == 0xff) ++ die("%s: rank is 0xff\n", __func__); ++ ++ if (!en_multicast && !does_ch_exist(ctrl, channel)) ++ die("%s: Tried to change margin of empty channel %u\n", __func__, channel); ++ ++ const uint32_t max_value = get_max_margin(param); ++ const int32_t v0 = clamp_s32(-max_value, value0, max_value); ++ ++ union ddr_data_offset_train_reg ddr_data_offset_train = { ++ .raw = en_multicast ? 0 : ctrl->data_offset_train[channel][byte], ++ }; ++ bool update_offset_train = false; ++ switch (param) { ++ case RcvEna: ++ ddr_data_offset_train.rcven = v0; ++ update_offset_train = true; ++ break; ++ case RdT: ++ ddr_data_offset_train.rx_dqs = v0; ++ update_offset_train = true; ++ break; ++ case WrT: ++ ddr_data_offset_train.tx_dq = v0; ++ update_offset_train = true; ++ break; ++ case WrDqsT: ++ ddr_data_offset_train.tx_dqs = v0; ++ update_offset_train = true; ++ break; ++ case RdV: ++ ddr_data_offset_train.vref = v0; ++ update_offset_train = true; ++ break; ++ default: ++ die("%s: Invalid margin parameter %u\n", __func__, param); ++ } ++ if (update_offset_train) { ++ update_data_offset_train( ++ ctrl, ++ param, ++ en_multicast, ++ channel, ++ rank, ++ byte, ++ update_ctrl, ++ regfile, ++ ddr_data_offset_train.raw); ++ } ++} ++ ++void change_1d_margin_multicast( ++ struct sysinfo *ctrl, ++ const enum margin_parameter param, ++ const int32_t value0, ++ const uint8_t rank, ++ const bool update_ctrl, ++ const enum regfile_mode regfile) ++{ ++ change_margin(ctrl, param, value0, true, 0, rank, 0, update_ctrl, regfile); ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index eaaaedad1e..1c8473056b 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -36,6 +36,18 @@ + + #define RTTNOM_MASK (BIT(9) | BIT(6) | BIT(2)) + ++/* Margin parameter limits */ ++#define MAX_POSSIBLE_TIME 31 ++#define MAX_POSSIBLE_VREF 54 ++ ++#define MAX_POSSIBLE_BOTH MAX_POSSIBLE_VREF ++ ++#define MIN_TIME (-MAX_POSSIBLE_TIME) ++#define MAX_TIME (MAX_POSSIBLE_TIME) ++ ++#define MIN_VREF (-MAX_POSSIBLE_VREF) ++#define MAX_VREF (MAX_POSSIBLE_VREF) ++ + #define BASIC_VA_PAT_SPREAD_8 0x01010101 + + #define WDB_CACHE_LINE_SIZE 8 +@@ -46,6 +58,14 @@ + /* Specified in PI ticks. 64 PI ticks == 1 qclk */ + #define tDQSCK_DRIFT 64 + ++enum margin_parameter { ++ RcvEna, ++ RdT, ++ WrT, ++ WrDqsT, ++ RdV, ++}; ++ + /* ZQ calibration types */ + enum { + ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ +@@ -515,6 +535,25 @@ void download_regfile( + bool read_rf_rd, + bool read_rf_wr); + ++void change_margin( ++ struct sysinfo *ctrl, ++ const enum margin_parameter param, ++ const int32_t value0, ++ const bool en_multicast, ++ const uint8_t channel, ++ const uint8_t rank, ++ const uint8_t byte, ++ const bool update_ctrl, ++ const enum regfile_mode regfile); ++ ++void change_1d_margin_multicast( ++ struct sysinfo *ctrl, ++ const enum margin_parameter param, ++ const int32_t value0, ++ const uint8_t rank, ++ const bool update_ctrl, ++ const enum regfile_mode regfile); ++ + uint8_t get_rx_bias(const struct sysinfo *ctrl); + + uint8_t get_tCWL(uint32_t mem_clock_mhz); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +index b099f4bb82..a0e36ed082 100644 +--- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -25,6 +25,18 @@ union ddr_data_tx_train_rank_reg { + uint32_t raw; + }; + ++union ddr_data_offset_train_reg { ++ struct __packed { ++ int32_t rcven : 6; // Bits 5:0 ++ int32_t rx_dqs : 6; // Bits 11:6 ++ int32_t tx_dq : 6; // Bits 17:12 ++ int32_t tx_dqs : 6; // Bits 23:18 ++ int32_t vref : 7; // Bits 30:24 ++ int32_t : 1; // Bits 31:31 ++ }; ++ uint32_t raw; ++}; ++ + union ddr_data_control_0_reg { + struct __packed { + uint32_t rx_training_mode : 1; // Bits 0:0 +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 9172d4f2b0..0acafbc826 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -21,6 +21,7 @@ + #define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) + + #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) ++#define DDR_DATA_OFFSET_TRAIN_ch_b(ch, byte) _DDRIO_C_R_B(0x0070, ch, 0, byte) + #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) + + /* DDR CKE per-channel */ +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0041-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch b/config/coreboot/default/patches/0041-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch deleted file mode 100644 index 6ec32987..00000000 --- a/config/coreboot/default/patches/0041-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch +++ /dev/null @@ -1,240 +0,0 @@ -From 3110c4392d40175716f167be5ef8234f2b4cd030 Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Tue, 6 Aug 2024 00:50:24 +0100 -Subject: [PATCH 41/65] nb/gm45: Fix Angel's DDR2 RCOMP fix on DDR3 boards - -We add this patch: - -commit commit_id_here -Author: Angel Pons -Date: Mon May 10 22:40:59 2021 +0200 - - nb/intel/gm45: Make DDR2 raminit work - -This patch was original applied, in lbmk, only on coreboot/dell, -separately from coreboot/default, which was wasteful because it -meant having an entire coreboot tree just for a single board. We -did this, because the DDR2 RCOMP fix happened to break DDR3 init -on other boards. - -What *this* new patch does on top of Angel's patch, is make sure -that their changes only apply to DDR2, while DDR3 behaviour remains -unchanged. This means that the Dell Latitude E6400 can be supported -in the main coreboot tree, within lbmk. - -Essentially, this patch restores the old behaviour, prior to applying -Angel's patch, only when DDR3 memory is used. - -Signed-off-by: Leah Rowe ---- - src/northbridge/intel/gm45/raminit.c | 161 +++++++++--------- - .../intel/gm45/raminit_rcomp_calibration.c | 9 +- - 2 files changed, 88 insertions(+), 82 deletions(-) - -diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c -index df8f46fbbc..433db3a68c 100644 ---- a/src/northbridge/intel/gm45/raminit.c -+++ b/src/northbridge/intel/gm45/raminit.c -@@ -1117,7 +1117,10 @@ static void dram_program_timings(const int spd_type, const timings_t *const timi - reg = (reg & ~(0xf << 10)) | (2 << 10); - else - reg = (reg & ~(0xf << 10)) | (3 << 10); -- reg = (reg & ~(0x7 << 5)) | (2 << 5); -+ if (spd_type == DDR2) -+ reg = (reg & ~(0x7 << 5)) | (2 << 5); -+ else -+ reg = (reg & ~(0x7 << 5)) | (3 << 5); - } else if (timings->mem_clock != MEM_CLOCK_1067MT) { - reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15); - reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10); -@@ -2209,83 +2212,85 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume) - raminit_write_training(timings->mem_clock, dimms, s3resume); - } - -- /* -- * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done -- * after receiver enable calibration, otherwise raminit sometimes -- * completes with non-working memory. -- */ -- mchbar_write32(0x0530, 0x06060005); -- mchbar_write32(0x0680, 0x06060606); -- mchbar_write32(0x0684, 0x08070606); -- mchbar_write32(0x0688, 0x0e0e0c0a); -- mchbar_write32(0x068c, 0x0e0e0e0e); -- mchbar_write32(0x0698, 0x06060606); -- mchbar_write32(0x069c, 0x08070606); -- mchbar_write32(0x06a0, 0x0c0c0b0a); -- mchbar_write32(0x06a4, 0x0c0c0c0c); -- -- mchbar_write32(0x06c0, 0x02020202); -- mchbar_write32(0x06c4, 0x03020202); -- mchbar_write32(0x06c8, 0x04040403); -- mchbar_write32(0x06cc, 0x04040404); -- mchbar_write32(0x06d8, 0x02020202); -- mchbar_write32(0x06dc, 0x03020202); -- mchbar_write32(0x06e0, 0x04040403); -- mchbar_write32(0x06e4, 0x04040404); -- -- mchbar_write32(0x0700, 0x02020202); -- mchbar_write32(0x0704, 0x03020202); -- mchbar_write32(0x0708, 0x04040403); -- mchbar_write32(0x070c, 0x04040404); -- mchbar_write32(0x0718, 0x02020202); -- mchbar_write32(0x071c, 0x03020202); -- mchbar_write32(0x0720, 0x04040403); -- mchbar_write32(0x0724, 0x04040404); -- -- mchbar_write32(0x0740, 0x02020202); -- mchbar_write32(0x0744, 0x03020202); -- mchbar_write32(0x0748, 0x04040403); -- mchbar_write32(0x074c, 0x04040404); -- mchbar_write32(0x0758, 0x02020202); -- mchbar_write32(0x075c, 0x03020202); -- mchbar_write32(0x0760, 0x04040403); -- mchbar_write32(0x0764, 0x04040404); -- -- mchbar_write32(0x0780, 0x06060606); -- mchbar_write32(0x0784, 0x09070606); -- mchbar_write32(0x0788, 0x0e0e0c0b); -- mchbar_write32(0x078c, 0x0e0e0e0e); -- mchbar_write32(0x0798, 0x06060606); -- mchbar_write32(0x079c, 0x09070606); -- mchbar_write32(0x07a0, 0x0d0d0c0b); -- mchbar_write32(0x07a4, 0x0d0d0d0d); -- -- mchbar_write32(0x07c0, 0x06060606); -- mchbar_write32(0x07c4, 0x09070606); -- mchbar_write32(0x07c8, 0x0e0e0c0b); -- mchbar_write32(0x07cc, 0x0e0e0e0e); -- mchbar_write32(0x07d8, 0x06060606); -- mchbar_write32(0x07dc, 0x09070606); -- mchbar_write32(0x07e0, 0x0d0d0c0b); -- mchbar_write32(0x07e4, 0x0d0d0d0d); -- -- mchbar_write32(0x0840, 0x06060606); -- mchbar_write32(0x0844, 0x08070606); -- mchbar_write32(0x0848, 0x0e0e0c0a); -- mchbar_write32(0x084c, 0x0e0e0e0e); -- mchbar_write32(0x0858, 0x06060606); -- mchbar_write32(0x085c, 0x08070606); -- mchbar_write32(0x0860, 0x0c0c0b0a); -- mchbar_write32(0x0864, 0x0c0c0c0c); -- -- mchbar_write32(0x0880, 0x02020202); -- mchbar_write32(0x0884, 0x03020202); -- mchbar_write32(0x0888, 0x04040403); -- mchbar_write32(0x088c, 0x04040404); -- mchbar_write32(0x0898, 0x02020202); -- mchbar_write32(0x089c, 0x03020202); -- mchbar_write32(0x08a0, 0x04040403); -- mchbar_write32(0x08a4, 0x04040404); -+ if (sysinfo->spd_type == DDR2) { -+ /* -+ * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done -+ * after receiver enable calibration, otherwise raminit sometimes -+ * completes with non-working memory. -+ */ -+ mchbar_write32(0x0530, 0x06060005); -+ mchbar_write32(0x0680, 0x06060606); -+ mchbar_write32(0x0684, 0x08070606); -+ mchbar_write32(0x0688, 0x0e0e0c0a); -+ mchbar_write32(0x068c, 0x0e0e0e0e); -+ mchbar_write32(0x0698, 0x06060606); -+ mchbar_write32(0x069c, 0x08070606); -+ mchbar_write32(0x06a0, 0x0c0c0b0a); -+ mchbar_write32(0x06a4, 0x0c0c0c0c); -+ -+ mchbar_write32(0x06c0, 0x02020202); -+ mchbar_write32(0x06c4, 0x03020202); -+ mchbar_write32(0x06c8, 0x04040403); -+ mchbar_write32(0x06cc, 0x04040404); -+ mchbar_write32(0x06d8, 0x02020202); -+ mchbar_write32(0x06dc, 0x03020202); -+ mchbar_write32(0x06e0, 0x04040403); -+ mchbar_write32(0x06e4, 0x04040404); -+ -+ mchbar_write32(0x0700, 0x02020202); -+ mchbar_write32(0x0704, 0x03020202); -+ mchbar_write32(0x0708, 0x04040403); -+ mchbar_write32(0x070c, 0x04040404); -+ mchbar_write32(0x0718, 0x02020202); -+ mchbar_write32(0x071c, 0x03020202); -+ mchbar_write32(0x0720, 0x04040403); -+ mchbar_write32(0x0724, 0x04040404); -+ -+ mchbar_write32(0x0740, 0x02020202); -+ mchbar_write32(0x0744, 0x03020202); -+ mchbar_write32(0x0748, 0x04040403); -+ mchbar_write32(0x074c, 0x04040404); -+ mchbar_write32(0x0758, 0x02020202); -+ mchbar_write32(0x075c, 0x03020202); -+ mchbar_write32(0x0760, 0x04040403); -+ mchbar_write32(0x0764, 0x04040404); -+ -+ mchbar_write32(0x0780, 0x06060606); -+ mchbar_write32(0x0784, 0x09070606); -+ mchbar_write32(0x0788, 0x0e0e0c0b); -+ mchbar_write32(0x078c, 0x0e0e0e0e); -+ mchbar_write32(0x0798, 0x06060606); -+ mchbar_write32(0x079c, 0x09070606); -+ mchbar_write32(0x07a0, 0x0d0d0c0b); -+ mchbar_write32(0x07a4, 0x0d0d0d0d); -+ -+ mchbar_write32(0x07c0, 0x06060606); -+ mchbar_write32(0x07c4, 0x09070606); -+ mchbar_write32(0x07c8, 0x0e0e0c0b); -+ mchbar_write32(0x07cc, 0x0e0e0e0e); -+ mchbar_write32(0x07d8, 0x06060606); -+ mchbar_write32(0x07dc, 0x09070606); -+ mchbar_write32(0x07e0, 0x0d0d0c0b); -+ mchbar_write32(0x07e4, 0x0d0d0d0d); -+ -+ mchbar_write32(0x0840, 0x06060606); -+ mchbar_write32(0x0844, 0x08070606); -+ mchbar_write32(0x0848, 0x0e0e0c0a); -+ mchbar_write32(0x084c, 0x0e0e0e0e); -+ mchbar_write32(0x0858, 0x06060606); -+ mchbar_write32(0x085c, 0x08070606); -+ mchbar_write32(0x0860, 0x0c0c0b0a); -+ mchbar_write32(0x0864, 0x0c0c0c0c); -+ -+ mchbar_write32(0x0880, 0x02020202); -+ mchbar_write32(0x0884, 0x03020202); -+ mchbar_write32(0x0888, 0x04040403); -+ mchbar_write32(0x088c, 0x04040404); -+ mchbar_write32(0x0898, 0x02020202); -+ mchbar_write32(0x089c, 0x03020202); -+ mchbar_write32(0x08a0, 0x04040403); -+ mchbar_write32(0x08a4, 0x04040404); -+ } - - igd_compute_ggc(sysinfo); - -diff --git a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c -index b74765fd9c..5d4505e063 100644 ---- a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c -+++ b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c -@@ -198,7 +198,7 @@ void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) { - reg = mchbar_read32(0x518); - lut_idx[channel][group][PULL_UP] = (reg >> 24) & 0x7f; - lut_idx[channel][group][PULL_DOWN] = (reg >> 16) & 0x7f; -- if (i == 1) { -+ if ((i == 1) && (ddr_type == DDR2)) { - magic_comp[0] = (reg >> 8) & 0x3f; - magic_comp[1] = (reg >> 0) & 0x3f; - } -@@ -242,7 +242,8 @@ void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) { - } - mchbar += 0x0040; - } -- -- mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26); -- mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20); -+ if (ddr_type == DDR2) { -+ mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26); -+ mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20); -+ } - } --- -2.39.5 - diff --git a/config/coreboot/default/patches/0042-haswell-NRI-Add-read-MPR-training.patch b/config/coreboot/default/patches/0042-haswell-NRI-Add-read-MPR-training.patch new file mode 100644 index 00000000..f2ccb7ad --- /dev/null +++ b/config/coreboot/default/patches/0042-haswell-NRI-Add-read-MPR-training.patch @@ -0,0 +1,332 @@ +From 8f07ea076572dd3371dca7b3dbd5ff9c9b332c55 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 11:35:49 +0200 +Subject: [PATCH 42/51] haswell NRI: Add read MPR training + +Implement read training using DDR3 MPR (Multi-Purpose Register). + +Change-Id: Id17cb2c4c399ac9bcc937b595b58f863c152461b +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/raminit_main.c | 1 + + .../haswell/native_raminit/raminit_native.h | 4 + + .../haswell/native_raminit/train_read_mpr.c | 241 ++++++++++++++++++ + .../intel/haswell/registers/mchbar.h | 2 +- + 5 files changed, 248 insertions(+), 1 deletion(-) + create mode 100644 src/northbridge/intel/haswell/native_raminit/train_read_mpr.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index e2fbfb4211..c442be0728 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -16,4 +16,5 @@ romstage-y += setup_wdb.c + romstage-y += spd_bitmunching.c + romstage-y += testing_io.c + romstage-y += timings_refresh.c ++romstage-y += train_read_mpr.c + romstage-y += train_receive_enable.c +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 7d444659c3..264d1468f5 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -61,6 +61,7 @@ static const struct task_entry cold_boot[] = { + { do_jedec_init, true, "JEDECINIT", }, + { pre_training, true, "PRETRAIN", }, + { train_receive_enable, true, "RCVET", }, ++ { train_read_mpr, true, "RDMPRT", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 1c8473056b..7a486479ea 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -28,6 +28,8 @@ + /* Always use 12 legs for emphasis (not trained) */ + #define TXEQFULLDRV (3 << 4) + ++#define LOOPCOUNT_INFINITE 0xff ++ + /* DDR3 mode register bits */ + #define MR0_DLL_RESET BIT(8) + +@@ -213,6 +215,7 @@ enum raminit_status { + RAMINIT_STATUS_POLL_TIMEOUT, + RAMINIT_STATUS_REUT_ERROR, + RAMINIT_STATUS_RCVEN_FAILURE, ++ RAMINIT_STATUS_RMPR_FAILURE, + RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ + }; + +@@ -434,6 +437,7 @@ enum raminit_status configure_mc(struct sysinfo *ctrl); + enum raminit_status configure_memory_map(struct sysinfo *ctrl); + enum raminit_status do_jedec_init(struct sysinfo *ctrl); + enum raminit_status train_receive_enable(struct sysinfo *ctrl); ++enum raminit_status train_read_mpr(struct sysinfo *ctrl); + + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); +diff --git a/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c +new file mode 100644 +index 0000000000..ade1e36148 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c +@@ -0,0 +1,241 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++#include "ranges.h" ++ ++#define RMPR_START (-32) ++#define RMPR_STOP (32) ++#define RMPR_STEP 1 ++ ++#define RMPR_MIN_WIDTH 12 ++ ++#define RMPR_PLOT RAM_DEBUG ++ ++/* ++ * Clear rx_training_mode. For LPDDR, we first need to disable odt_samp_extend_en, ++ * then disable rx_training_mode, and finally re-enable odt_samp_extend_en. ++ */ ++static void clear_rx_training_mode(struct sysinfo *ctrl, const uint8_t channel) ++{ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ mchbar_write32(DQ_CONTROL_2(channel, byte), ctrl->dq_control_2[channel][byte]); ++ ++ if (ctrl->lpddr) { ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = mchbar_read32(DDR_DATA_ch_CONTROL_0(channel)), ++ }; ++ data_control_0.odt_samp_extend_en = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ tick_delay(1); ++ data_control_0.rx_training_mode = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ tick_delay(1); ++ } ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); ++} ++ ++static void set_rxdqs_edges_to_midpoint(struct sysinfo *ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ update_rxt(ctrl, channel, rank, byte, RXT_RXDQS_BOTH, 32); ++ } ++ } ++} ++ ++static void enter_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank) ++{ ++ /* Program MR3 and mask RAS/WE to prevent scheduler from issuing non-read commands */ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ if (!ctrl->lpddr) ++ reut_issue_mrs(ctrl, channel, BIT(rank), 3, 1 << 2); ++ ++ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { ++ .raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)), ++ }; ++ reut_misc_odt_ctrl.mpr_train_ddr_on = 1; ++ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw); ++ } ++} ++ ++static void leave_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ /* ++ * The mpr_train_ddr_on bit will force a special command. ++ * Therefore, clear it before issuing the MRS command. ++ */ ++ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { ++ .raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)), ++ }; ++ reut_misc_odt_ctrl.mpr_train_ddr_on = 0; ++ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw); ++ if (!ctrl->lpddr) ++ reut_issue_mrs(ctrl, channel, BIT(rank), 3, 0 << 2); ++ } ++} ++ ++enum raminit_status train_read_mpr(struct sysinfo *ctrl) ++{ ++ set_rxdqs_edges_to_midpoint(ctrl); ++ clear_data_offset_train_all(ctrl); ++ setup_io_test_mpr(ctrl, ctrl->chanmap, LOOPCOUNT_INFINITE, NSOE); ++ enum raminit_status status = RAMINIT_STATUS_SUCCESS; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!does_rank_exist(ctrl, rank)) ++ continue; ++ ++ printk(BIOS_DEBUG, "Rank %u\n", rank); ++ printk(RMPR_PLOT, "Channel"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RMPR_PLOT, "\t%u\t\t", channel); ++ } ++ printk(RMPR_PLOT, "\nByte"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RMPR_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(RMPR_PLOT, "%u ", byte); ++ } ++ enter_mpr_train_ddr_mode(ctrl, rank); ++ struct linear_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) ++ select_reut_ranks(ctrl, channel, BIT(rank)); ++ ++ printk(RMPR_PLOT, "\nDqsDelay\n"); ++ int8_t dqs_delay; ++ for (dqs_delay = RMPR_START; dqs_delay < RMPR_STOP; dqs_delay += RMPR_STEP) { ++ printk(RMPR_PLOT, "% 5d", dqs_delay); ++ const enum regfile_mode regfile = REG_FILE_USE_START; ++ /* Looks like MRC uses rank 0 here, but it feels wrong */ ++ change_1d_margin_multicast(ctrl, RdT, dqs_delay, rank, false, regfile); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ union ddr_data_control_2_reg data_control_2 = { ++ .raw = ctrl->dq_control_2[channel][byte], ++ }; ++ data_control_2.force_bias_on = 1; ++ data_control_2.force_rx_on = 1; ++ data_control_2.leaker_comp = 0; ++ mchbar_write32(DQ_CONTROL_2(channel, byte), ++ data_control_2.raw); ++ } ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.rx_training_mode = 1; ++ data_control_0.force_odt_on = !ctrl->lpddr; ++ data_control_0.en_read_preamble = 0; ++ data_control_0.odt_samp_extend_en = ctrl->lpddr; ++ const uint32_t reg_offset = DDR_DATA_ch_CONTROL_0(channel); ++ mchbar_write32(reg_offset, data_control_0.raw); ++ } ++ run_mpr_io_test(false); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(RMPR_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ uint32_t fb = get_data_train_feedback(channel, byte); ++ const bool pass = fb == 1; ++ printk(RMPR_PLOT, pass ? ". " : "# "); ++ linear_record_pass( ++ ®ion_data[channel][byte], ++ pass, ++ dqs_delay, ++ RMPR_START, ++ RMPR_STEP); ++ } ++ } ++ printk(RMPR_PLOT, "\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ clear_rx_training_mode(ctrl, channel); ++ } ++ io_reset(); ++ } ++ printk(RMPR_PLOT, "\n"); ++ leave_mpr_train_ddr_mode(ctrl, rank); ++ clear_data_offset_train_all(ctrl); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\tRxDqsPN\n", ++ channel, rank); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ struct linear_train_data *data = ®ion_data[channel][byte]; ++ const int32_t lwidth = range_width(data->largest); ++ if (lwidth <= RMPR_MIN_WIDTH) { ++ printk(BIOS_ERR, ++ "Bad eye (lwidth %d <= min %d) for byte %u\n", ++ lwidth, RMPR_MIN_WIDTH, byte); ++ status = RAMINIT_STATUS_RMPR_FAILURE; ++ } ++ /* ++ * The MPR center may not be ideal on certain platforms for ++ * unknown reasons. If so, adjust it with a magical number. ++ * For Haswell, the magical number is zero. Hell knows why. ++ */ ++ const int32_t center = range_center(data->largest); ++ ctrl->rxdqsp[channel][rank][byte] = center - RMPR_START; ++ ctrl->rxdqsn[channel][rank][byte] = center - RMPR_START; ++ printk(BIOS_DEBUG, " B%u: \t%d\t%d\t%d\t%d\t%u\n", byte, ++ data->largest.start, data->largest.end, lwidth, ++ center, ctrl->rxdqsp[channel][rank][byte]); ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ } ++ ++ /* ++ * Now program the DQS center values on populated ranks. data is taken from ++ * the host struct. We need to do it after all ranks are trained, because we ++ * need to keep the same DQS value on all ranks during the training procedure. ++ */ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ } ++ } ++ change_1d_margin_multicast(ctrl, RdT, 0, 0, false, REG_FILE_USE_CURRENT); ++ io_reset(); ++ return status; ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 0acafbc826..6a31d3a32c 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -122,7 +122,7 @@ + #define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch) + + #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) +- ++#define REUT_ch_MISC_ODT_CTRL(ch) _MCMAIN_C(0x4194, ch) + #define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch) + #define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch) + #define REUT_ch_PAT_CADB_MUX_CTRL(ch) _MCMAIN_C(0x41a0, ch) +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0042-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch b/config/coreboot/default/patches/0042-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch deleted file mode 100644 index 0131af84..00000000 --- a/config/coreboot/default/patches/0042-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 265fb9f4fd017de635bc44b5a762c69a8bec6158 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Mon, 20 May 2024 10:24:16 -0600 -Subject: [PATCH 42/65] mb/dell/e6400: Use 100 MHz reference clock for display - -The E6400 uses a 100 MHz reference clock for spread spectrum support on -LVDS, whereas libgfxinit previously assumed a 96 MHz input clock. For -the more common 1280 x 800 display panels, the numerical error was not -large enough to cause noticable issues, but the actual pixel clock -frequency derived from a 100 MHz reference using PLL configs calculated -assuming a 96 MHz reference was not close enough for 1440 x 900 panels, -which require a much higher pixel clock. This resulted in a garbled -display in the pre-OS graphics environment provided by libgfxinit. - -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/e6400/Kconfig | 3 +++ - src/northbridge/intel/gm45/Kconfig | 4 ++++ - 2 files changed, 7 insertions(+) - -diff --git a/src/mainboard/dell/e6400/Kconfig b/src/mainboard/dell/e6400/Kconfig -index 417d95fd5d..6fe1b1c456 100644 ---- a/src/mainboard/dell/e6400/Kconfig -+++ b/src/mainboard/dell/e6400/Kconfig -@@ -19,6 +19,9 @@ config BOARD_SPECIFIC_OPTIONS - select INTEL_GMA_HAVE_VBT - select EC_DELL_MEC5035 - -+config INTEL_GMA_DPLL_REF_FREQ -+ default 100000000 -+ - config MAINBOARD_DIR - default "dell/e6400" - -diff --git a/src/northbridge/intel/gm45/Kconfig b/src/northbridge/intel/gm45/Kconfig -index 8059e7ee80..5df5a93296 100644 ---- a/src/northbridge/intel/gm45/Kconfig -+++ b/src/northbridge/intel/gm45/Kconfig -@@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_GM45 - - if NORTHBRIDGE_INTEL_GM45 - -+config INTEL_GMA_DPLL_REF_FREQ -+ int -+ default 96000000 -+ - config VBOOT - select VBOOT_STARTS_IN_BOOTBLOCK - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0043-haswell-NRI-Add-write-leveling.patch b/config/coreboot/default/patches/0043-haswell-NRI-Add-write-leveling.patch new file mode 100644 index 00000000..0202ed1b --- /dev/null +++ b/config/coreboot/default/patches/0043-haswell-NRI-Add-write-leveling.patch @@ -0,0 +1,689 @@ +From 6df4b7eb0512c24a5f53bc92e81ad6cf42cd28a7 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 12:56:04 +0200 +Subject: [PATCH 43/51] haswell NRI: Add write leveling + +Implement JEDEC write leveling, which is done in two steps. The first +step uses the JEDEC procedure to do "fine" write leveling, i.e. align +the DQS phase to the clock signal. The second step performs a regular +read-write test to correct "coarse" cycle errors. + +Change-Id: I27678523fe22c38173a688e2a4751c259a20f009 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/raminit_main.c | 1 + + .../haswell/native_raminit/raminit_native.h | 10 + + .../train_jedec_write_leveling.c | 581 ++++++++++++++++++ + .../intel/haswell/registers/mchbar.h | 2 + + 5 files changed, 595 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index c442be0728..40c2f5e014 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -16,5 +16,6 @@ romstage-y += setup_wdb.c + romstage-y += spd_bitmunching.c + romstage-y += testing_io.c + romstage-y += timings_refresh.c ++romstage-y += train_jedec_write_leveling.c + romstage-y += train_read_mpr.c + romstage-y += train_receive_enable.c +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 264d1468f5..1ff23be615 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -62,6 +62,7 @@ static const struct task_entry cold_boot[] = { + { pre_training, true, "PRETRAIN", }, + { train_receive_enable, true, "RCVET", }, + { train_read_mpr, true, "RDMPRT", }, ++ { train_jedec_write_leveling, true, "JWRL", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 7a486479ea..d6b11b9d3c 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -60,6 +60,9 @@ + /* Specified in PI ticks. 64 PI ticks == 1 qclk */ + #define tDQSCK_DRIFT 64 + ++/* Maximum additional latency */ ++#define MAX_ADD_DELAY 2 ++ + enum margin_parameter { + RcvEna, + RdT, +@@ -216,6 +219,7 @@ enum raminit_status { + RAMINIT_STATUS_REUT_ERROR, + RAMINIT_STATUS_RCVEN_FAILURE, + RAMINIT_STATUS_RMPR_FAILURE, ++ RAMINIT_STATUS_JWRL_FAILURE, + RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ + }; + +@@ -381,6 +385,11 @@ static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint + return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte)); + } + ++static inline uint16_t get_byte_group_errors(const uint8_t channel) ++{ ++ return mchbar_read32(4 + REUT_ch_ERR_MISC_STATUS(channel)) & 0x1ff; ++} ++ + /* Number of ticks to wait in units of 69.841279 ns (citation needed) */ + static inline void tick_delay(const uint32_t delay) + { +@@ -438,6 +447,7 @@ enum raminit_status configure_memory_map(struct sysinfo *ctrl); + enum raminit_status do_jedec_init(struct sysinfo *ctrl); + enum raminit_status train_receive_enable(struct sysinfo *ctrl); + enum raminit_status train_read_mpr(struct sysinfo *ctrl); ++enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); + + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); +diff --git a/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c +new file mode 100644 +index 0000000000..ef6483e2bd +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c +@@ -0,0 +1,581 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++#include "ranges.h" ++ ++#define JWLC_PLOT RAM_DEBUG ++#define JWRL_PLOT RAM_DEBUG ++ ++static void reset_dram_dll(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank) ++{ ++ const uint16_t mr0reg = ctrl->mr0[channel][rank / 2]; ++ reut_issue_mrs(ctrl, channel, BIT(rank), 0, mr0reg | MR0_DLL_RESET); ++} ++ ++static void program_wdb_pattern(struct sysinfo *ctrl, const bool invert) ++{ ++ /* Pattern to keep DQ-DQS simple but detect any failures. Same as NHM/WSM. */ ++ const uint8_t pat[4][2] = { ++ { 0x00, 0xff }, ++ { 0xff, 0x00 }, ++ { 0xc3, 0x3c }, ++ { 0x3c, 0xc3 }, ++ }; ++ const uint8_t pmask[2][8] = { ++ { 0, 0, 1, 1, 1, 1, 0, 0 }, ++ { 1, 1, 0, 0, 0, 0, 1, 1 }, ++ }; ++ for (uint8_t s = 0; s < ARRAY_SIZE(pat); s++) ++ write_wdb_fixed_pat(ctrl, pat[s], pmask[invert], ARRAY_SIZE(pmask[invert]), s); ++} ++ ++static int16_t set_add_delay(uint32_t *add_delay, uint8_t rank, int8_t target_off) ++{ ++ const uint8_t shift = rank * 2; ++ if (target_off > MAX_ADD_DELAY) { ++ *add_delay &= ~(3 << shift); ++ *add_delay |= MAX_ADD_DELAY << shift; ++ return 128 * (target_off - MAX_ADD_DELAY); ++ } else if (target_off < 0) { ++ *add_delay &= ~(3 << shift); ++ *add_delay |= 0 << shift; ++ return 128 * target_off; ++ } else { ++ *add_delay &= ~(3 << shift); ++ *add_delay |= target_off << shift; ++ return 0; ++ } ++} ++ ++static enum raminit_status train_jedec_write_leveling_cleanup(struct sysinfo *ctrl) ++{ ++ const struct reut_box reut_addr = { ++ .col = { ++ .start = 0, ++ .stop = 1023, ++ .inc_val = 1, ++ }, ++ }; ++ const struct wdb_pat wdb_pattern = { ++ .start_ptr = 0, ++ .stop_ptr = 3, ++ .inc_rate = 1, ++ .dq_pattern = BASIC_VA, ++ }; ++ const int8_t offsets[] = { 0, 1, -1, 2, 3 }; ++ const int8_t dq_offsets[] = { 0, -10, 10, -5, 5, -15, 15 }; ++ const uint8_t dq_offset_max = ARRAY_SIZE(dq_offsets); ++ ++ /* Set LFSR seeds to be sequential */ ++ program_wdb_lfsr(ctrl, true); ++ setup_io_test( ++ ctrl, ++ ctrl->chanmap, ++ PAT_WR_RD, ++ 2, ++ 4, ++ &reut_addr, ++ NSOE, ++ &wdb_pattern, ++ 0, ++ 0); ++ ++ const union reut_pat_wdb_cl_mux_cfg_reg reut_wdb_cl_mux_cfg = { ++ .mux_0_control = REUT_MUX_BTBUFFER, ++ .mux_1_control = REUT_MUX_BTBUFFER, ++ .mux_2_control = REUT_MUX_BTBUFFER, ++ .ecc_data_source_sel = 1, ++ }; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_CFG(channel), reut_wdb_cl_mux_cfg.raw); ++ } ++ ++ int8_t byte_off[NUM_CHANNELS][NUM_LANES] = { 0 }; ++ uint32_t add_delay[NUM_CHANNELS] = { 0 }; ++ enum raminit_status status = RAMINIT_STATUS_SUCCESS; ++ bool invert = false; ++ const uint16_t valid_byte_mask = BIT(ctrl->lanes) - 1; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ uint8_t chanmask = 0; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) ++ chanmask |= select_reut_ranks(ctrl, channel, BIT(rank)); ++ ++ if (!chanmask) ++ continue; ++ ++ printk(BIOS_DEBUG, "Rank %u\n", rank); ++ printk(JWLC_PLOT, "Channel"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(JWLC_PLOT, "\t\t%u\t", channel); ++ } ++ printk(JWLC_PLOT, "\nByte\t"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(JWLC_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(JWLC_PLOT, "%u ", byte); ++ } ++ printk(JWLC_PLOT, "\nDelay DqOffset"); ++ bool done = false; ++ int8_t byte_sum[NUM_CHANNELS] = { 0 }; ++ uint16_t byte_pass[NUM_CHANNELS] = { 0 }; ++ for (uint8_t off = 0; off < ARRAY_SIZE(offsets); off++) { ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ const int16_t global_byte_off = ++ set_add_delay(&add_delay[channel], rank, offsets[off]); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ update_txt(ctrl, channel, rank, byte, TXT_DQDQS_OFF, ++ global_byte_off); ++ } ++ mchbar_write32(SC_WR_ADD_DELAY_ch(channel), ++ add_delay[channel]); ++ } ++ /* Reset FIFOs and DRAM DLL (Micron workaround) */ ++ if (!ctrl->lpddr) { ++ io_reset(); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ reset_dram_dll(ctrl, channel, rank); ++ } ++ udelay(1); ++ } ++ for (uint8_t dq_offset = 0; dq_offset < dq_offset_max; dq_offset++) { ++ printk(JWLC_PLOT, "\n% 3d\t% 3d", ++ offsets[off], dq_offsets[dq_offset]); ++ change_1d_margin_multicast( ++ ctrl, ++ WrT, ++ dq_offsets[dq_offset], ++ rank, ++ false, ++ REG_FILE_USE_RANK); ++ ++ /* ++ * Re-program the WDB pattern. Change the pattern ++ * for the next test to avoid false pass issues. ++ */ ++ program_wdb_pattern(ctrl, invert); ++ invert = !invert; ++ run_io_test(ctrl, chanmask, BASIC_VA, true); ++ done = true; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(JWLC_PLOT, "\t"); ++ uint16_t result = get_byte_group_errors(channel); ++ result &= valid_byte_mask; ++ ++ /* Skip bytes that have failed or already passed */ ++ const uint16_t skip_me = result | byte_pass[channel]; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const bool pass = result & BIT(byte); ++ printk(JWLC_PLOT, pass ? "# " : ". "); ++ if (skip_me & BIT(byte)) ++ continue; ++ ++ byte_pass[channel] |= BIT(byte); ++ byte_off[channel][byte] = offsets[off]; ++ byte_sum[channel] += offsets[off]; ++ } ++ if (byte_pass[channel] != valid_byte_mask) ++ done = false; ++ } ++ if (done) ++ break; ++ } ++ if (done) ++ break; ++ } ++ printk(BIOS_DEBUG, "\n\n"); ++ if (!done) { ++ printk(BIOS_ERR, "JWLC: Could not find a pass for all bytes\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(BIOS_ERR, "Channel %u, rank %u fail:", channel, rank); ++ const uint16_t passing_mask = byte_pass[channel]; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ if (BIT(byte) & passing_mask) ++ continue; ++ ++ printk(BIOS_ERR, " %u", byte); ++ } ++ printk(BIOS_ERR, "\n"); ++ } ++ status = RAMINIT_STATUS_JWRL_FAILURE; ++ break; ++ } ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ /* Refine target offset to make sure it works for all bytes */ ++ int8_t target_off = DIV_ROUND_CLOSEST(byte_sum[channel], ctrl->lanes); ++ int16_t global_byte_off = 0; ++ uint8_t all_good_loops = 0; ++ bool all_good = 0; ++ while (!all_good) { ++ global_byte_off = ++ set_add_delay(&add_delay[channel], rank, target_off); ++ all_good = true; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ int16_t local_offset; ++ local_offset = byte_off[channel][byte] - target_off; ++ local_offset = local_offset * 128 + global_byte_off; ++ const uint16_t tx_dq = ctrl->tx_dq[channel][rank][byte]; ++ if (tx_dq + local_offset >= (512 - 64)) { ++ all_good = false; ++ all_good_loops++; ++ target_off++; ++ break; ++ } ++ const uint16_t txdqs = ctrl->tx_dq[channel][rank][byte]; ++ if (txdqs + local_offset < 96) { ++ all_good = false; ++ all_good_loops++; ++ target_off--; ++ break; ++ } ++ } ++ /* Avoid an infinite loop */ ++ if (all_good_loops > 3) ++ break; ++ } ++ if (!all_good) { ++ printk(BIOS_ERR, "JWLC: Target offset refining failed\n"); ++ status = RAMINIT_STATUS_JWRL_FAILURE; ++ break; ++ } ++ printk(BIOS_DEBUG, "C%u.R%u: Offset\tFinalEdge\n", channel, rank); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ int16_t local_offset; ++ local_offset = byte_off[channel][byte] - target_off; ++ local_offset = local_offset * 128 + global_byte_off; ++ ctrl->tx_dq[channel][rank][byte] += local_offset; ++ ctrl->txdqs[channel][rank][byte] += local_offset; ++ update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0); ++ printk(BIOS_DEBUG, " B%u: %d\t%d\n", byte, local_offset, ++ ctrl->txdqs[channel][rank][byte]); ++ } ++ mchbar_write32(SC_WR_ADD_DELAY_ch(channel), add_delay[channel]); ++ if (!ctrl->lpddr) { ++ reset_dram_dll(ctrl, channel, rank); ++ udelay(1); ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ ++ /* Restore WDB after test */ ++ write_wdb_va_pat(ctrl, 0, BASIC_VA_PAT_SPREAD_8, 8, 0); ++ program_wdb_lfsr(ctrl, false); ++ mchbar_write32(DDR_DATA_OFFSET_TRAIN, 0); ++ ++ /** TODO: Do full JEDEC init instead? **/ ++ io_reset(); ++ return status; ++} ++ ++static enum raminit_status verify_wl_width(const int32_t lwidth) ++{ ++ if (lwidth <= 32) { ++ /* Check if width is valid */ ++ printk(BIOS_ERR, "WrLevel: Width region (%d) too small\n", lwidth); ++ return RAMINIT_STATUS_JWRL_FAILURE; ++ } ++ if (lwidth >= 96) { ++ /* Since we're calibrating a phase, a too large region is a problem */ ++ printk(BIOS_ERR, "WrLevel: Width region (%d) too large\n", lwidth); ++ return RAMINIT_STATUS_JWRL_FAILURE; ++ } ++ return 0; ++} ++ ++enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl) ++{ ++ /* ++ * Enabling WL mode causes DQS to toggle for 1024 QCLK. ++ * Wait for this to stop. Round up to nearest microsecond. ++ */ ++ const bool wl_long_delay = ctrl->lpddr; ++ const uint32_t dqs_toggle_time = wl_long_delay ? 2048 : 1024; ++ const uint32_t wait_time_us = DIV_ROUND_UP(ctrl->qclkps * dqs_toggle_time, 1000 * 1000); ++ ++ const uint16_t wl_start = 192; ++ const uint16_t wl_stop = 192 + 128; ++ const uint16_t wl_step = 2; ++ ++ /* Do not use cached MR values */ ++ const bool save_restore_mrs = ctrl->restore_mrs; ++ ctrl->restore_mrs = 0; ++ ++ /* Propagate delay values (without a write command) */ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* Propagate delay values from rank 0 to prevent assertion failures in RTL */ ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.read_rf_rd = 0; ++ data_control_0.read_rf_wr = 1; ++ data_control_0.read_rf_rank = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ union ddr_data_control_2_reg data_control_2 = { ++ .raw = ctrl->dq_control_2[channel][byte], ++ }; ++ data_control_2.force_bias_on = 1; ++ data_control_2.force_rx_on = 0; ++ data_control_2.wl_long_delay = wl_long_delay; ++ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); ++ } ++ } ++ ++ if (ctrl->lpddr) ++ die("%s: Missing LPDDR support\n", __func__); ++ ++ if (!ctrl->lpddr) ++ ddr3_program_mr1(ctrl, 0, 1); ++ ++ enum raminit_status status = RAMINIT_STATUS_SUCCESS; ++ struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!does_rank_exist(ctrl, rank)) ++ continue; ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ /** TODO: Differs for LPDDR **/ ++ uint16_t mr1reg = ctrl->mr1[channel][rank / 2]; ++ mr1reg &= ~MR1_QOFF_ENABLE; ++ mr1reg |= MR1_WL_ENABLE; ++ if (is_hsw_ult()) { ++ mr1reg &= ~RTTNOM_MASK; ++ mr1reg |= encode_ddr3_rttnom(120); ++ } else if (ctrl->dpc[channel] == 2) { ++ mr1reg &= ~RTTNOM_MASK; ++ mr1reg |= encode_ddr3_rttnom(60); ++ } ++ reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg); ++ ++ /* Assert ODT for myself */ ++ uint8_t odt_matrix = BIT(rank); ++ if (ctrl->dpc[channel] == 2) { ++ /* Assert ODT for non-target DIMM */ ++ const uint8_t other_dimm = ((rank + 2) / 2) & 1; ++ odt_matrix |= BIT(2 * other_dimm); ++ } ++ ++ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { ++ .raw = 0, ++ }; ++ if (ctrl->lpddr) { ++ /* Only one ODT pin for ULT */ ++ reut_misc_odt_ctrl.odt_on = 1; ++ reut_misc_odt_ctrl.odt_override = 1; ++ } else if (!is_hsw_ult()) { ++ reut_misc_odt_ctrl.odt_on = odt_matrix; ++ reut_misc_odt_ctrl.odt_override = 0xf; ++ } ++ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw); ++ } ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ /* ++ * Enable write leveling mode in DDR and propagate delay ++ * values (without a write command). Stay in WL mode. ++ */ ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.wl_training_mode = 1; ++ data_control_0.tx_pi_on = 1; ++ data_control_0.read_rf_rd = 0; ++ data_control_0.read_rf_wr = 1; ++ data_control_0.read_rf_rank = rank; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ } ++ printk(BIOS_DEBUG, "\nRank %u\n", rank); ++ printk(JWRL_PLOT, "Channel\t"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(JWRL_PLOT, "%u", channel); ++ if (channel > 0) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(JWRL_PLOT, "\t"); ++ } ++ printk(JWRL_PLOT, "\nByte"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(JWRL_PLOT, "\t%u", byte); ++ } ++ printk(JWRL_PLOT, "\nWlDelay"); ++ for (uint16_t wl_delay = wl_start; wl_delay < wl_stop; wl_delay += wl_step) { ++ printk(JWRL_PLOT, "\n %3u:", wl_delay); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ update_txt(ctrl, channel, rank, byte, TXT_TXDQS, ++ wl_delay); ++ } ++ } ++ /* Wait for the first burst to finish */ ++ if (wl_delay == wl_start) ++ udelay(wait_time_us); ++ ++ io_reset(); ++ udelay(wait_time_us); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const uint32_t feedback = ++ get_data_train_feedback(channel, byte); ++ const bool pass = (feedback & 0x1ff) >= 16; ++ printk(JWRL_PLOT, "\t%c%u", pass ? '.' : '#', feedback); ++ phase_record_pass( ++ ®ion_data[channel][byte], ++ pass, ++ wl_delay, ++ wl_start, ++ wl_step); ++ } ++ } ++ } ++ printk(JWRL_PLOT, "\n"); ++ printk(BIOS_DEBUG, "\n\tInitSt\tInitEn\tCurrSt\tCurrEn\tLargSt\tLargEn\n"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "C%u\n", channel); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ struct phase_train_data *data = ®ion_data[channel][byte]; ++ ++ phase_append_initial_to_current(data, wl_start, wl_step); ++ printk(BIOS_DEBUG, " B%u:\t%d\t%d\t%d\t%d\t%d\t%d\n", ++ byte, ++ data->initial.start, ++ data->initial.end, ++ data->current.start, ++ data->current.end, ++ data->largest.start, ++ data->largest.end); ++ } ++ } ++ ++ /* ++ * Clean up after test. Very coarsely adjust for ++ * any cycle errors. Program values for TxDQS. ++ */ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ /* Clear ODT before MRS (JEDEC spec) */ ++ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), 0); ++ ++ /** TODO: Differs for LPDDR **/ ++ const uint16_t mr1reg = ctrl->mr1[channel][rank / 2] | MR1_QOFF_ENABLE; ++ reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg); ++ ++ printk(BIOS_DEBUG, "\nC%u.R%u: LftEdge Width\n", channel, rank); ++ const bool rank_x16 = ctrl->dimms[channel][rank / 2].data.width == 16; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ struct phase_train_data *data = ®ion_data[channel][byte]; ++ const int32_t lwidth = range_width(data->largest); ++ int32_t tx_start = data->largest.start; ++ printk(BIOS_DEBUG, " B%u: %d\t%d\n", byte, tx_start, lwidth); ++ status = verify_wl_width(lwidth); ++ if (status) { ++ printk(BIOS_ERR, ++ "WrLevel problems on channel %u, byte %u\n", ++ channel, byte); ++ goto clean_up; ++ } ++ ++ /* Align byte pairs if DIMM is x16 */ ++ if (rank_x16 && (byte & 1)) { ++ const struct phase_train_data *const ref_data = ++ ®ion_data[channel][byte - 1]; ++ ++ if (tx_start > ref_data->largest.start + 64) ++ tx_start -= 128; ++ ++ if (tx_start < ref_data->largest.start - 64) ++ tx_start += 128; ++ } ++ ++ /* Fix for b4618067 - need to add 1 QCLK to DQS PI */ ++ if (is_hsw_ult()) ++ tx_start += 64; ++ ++ assert(tx_start >= 0); ++ ctrl->txdqs[channel][rank][byte] = tx_start; ++ ctrl->tx_dq[channel][rank][byte] = tx_start + 32; ++ update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0); ++ } ++ } ++ printk(BIOS_DEBUG, "\n"); ++ } ++ ++clean_up: ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ mchbar_write32(DQ_CONTROL_2(channel, byte), ++ ctrl->dq_control_2[channel][byte]); ++ } ++ } ++ if (!ctrl->lpddr) ++ ddr3_program_mr1(ctrl, 0, 0); ++ ++ ctrl->restore_mrs = save_restore_mrs; ++ ++ if (status) ++ return status; ++ ++ /** TODO: If this step fails and dec_wrd is set, clear it and try again **/ ++ return train_jedec_write_leveling_cleanup(ctrl); ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 6a31d3a32c..7c0b5a49de 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -121,6 +121,8 @@ + + #define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch) + ++#define REUT_ch_ERR_MISC_STATUS(ch) _MCMAIN_C(0x40e8, ch) ++ + #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) + #define REUT_ch_MISC_ODT_CTRL(ch) _MCMAIN_C(0x4194, ch) + #define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch) +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0043-haswell-NRI-Initialise-MPLL.patch b/config/coreboot/default/patches/0043-haswell-NRI-Initialise-MPLL.patch deleted file mode 100644 index c571fe3b..00000000 --- a/config/coreboot/default/patches/0043-haswell-NRI-Initialise-MPLL.patch +++ /dev/null @@ -1,348 +0,0 @@ -From ab36967cce0593dd17f3018ab4a6661e4219d242 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Thu, 11 Apr 2024 17:25:07 +0200 -Subject: [PATCH 43/65] haswell NRI: Initialise MPLL - -Add code to initialise the MPLL (Memory PLL). The procedure is similar -to the one for Sandy/Ivy Bridge, but it is not worth factoring out. - -Change-Id: I978c352de68f6d8cecc76f4ae3c12daaf4be9ed6 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 2 + - .../intel/haswell/native_raminit/init_mpll.c | 210 ++++++++++++++++++ - .../haswell/native_raminit/io_comp_control.c | 22 ++ - .../haswell/native_raminit/raminit_main.c | 3 +- - .../haswell/native_raminit/raminit_native.h | 11 + - .../intel/haswell/registers/mchbar.h | 3 + - 6 files changed, 250 insertions(+), 1 deletion(-) - create mode 100644 src/northbridge/intel/haswell/native_raminit/init_mpll.c - create mode 100644 src/northbridge/intel/haswell/native_raminit/io_comp_control.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index ebf7abc6ec..c125d84f0b 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -1,5 +1,7 @@ - ## SPDX-License-Identifier: GPL-2.0-or-later - -+romstage-y += init_mpll.c -+romstage-y += io_comp_control.c - romstage-y += raminit_main.c - romstage-y += raminit_native.c - romstage-y += spd_bitmunching.c -diff --git a/src/northbridge/intel/haswell/native_raminit/init_mpll.c b/src/northbridge/intel/haswell/native_raminit/init_mpll.c -new file mode 100644 -index 0000000000..1f3f2c29a9 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/init_mpll.c -@@ -0,0 +1,210 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+static uint32_t get_mem_multiplier(const struct sysinfo *ctrl) -+{ -+ const uint32_t mult = NS2MHZ_DIV256 / (ctrl->tCK * ctrl->base_freq); -+ -+ if (ctrl->base_freq == 100) -+ return clamp_u32(7, mult, 12); -+ -+ if (ctrl->base_freq == 133) -+ return clamp_u32(3, mult, 10); -+ -+ die("Unsupported base frequency\n"); -+} -+ -+static void normalize_tck(struct sysinfo *ctrl, const bool pll_ref100) -+{ -+ /** TODO: Haswell supports up to DDR3-2600 **/ -+ if (ctrl->tCK <= TCK_1200MHZ) { -+ ctrl->tCK = TCK_1200MHZ; -+ ctrl->base_freq = 133; -+ ctrl->mem_clock_mhz = 1200; -+ -+ } else if (ctrl->tCK <= TCK_1100MHZ) { -+ ctrl->tCK = TCK_1100MHZ; -+ ctrl->base_freq = 100; -+ ctrl->mem_clock_mhz = 1100; -+ -+ } else if (ctrl->tCK <= TCK_1066MHZ) { -+ ctrl->tCK = TCK_1066MHZ; -+ ctrl->base_freq = 133; -+ ctrl->mem_clock_mhz = 1066; -+ -+ } else if (ctrl->tCK <= TCK_1000MHZ) { -+ ctrl->tCK = TCK_1000MHZ; -+ ctrl->base_freq = 100; -+ ctrl->mem_clock_mhz = 1000; -+ -+ } else if (ctrl->tCK <= TCK_933MHZ) { -+ ctrl->tCK = TCK_933MHZ; -+ ctrl->base_freq = 133; -+ ctrl->mem_clock_mhz = 933; -+ -+ } else if (ctrl->tCK <= TCK_900MHZ) { -+ ctrl->tCK = TCK_900MHZ; -+ ctrl->base_freq = 100; -+ ctrl->mem_clock_mhz = 900; -+ -+ } else if (ctrl->tCK <= TCK_800MHZ) { -+ ctrl->tCK = TCK_800MHZ; -+ ctrl->base_freq = 133; -+ ctrl->mem_clock_mhz = 800; -+ -+ } else if (ctrl->tCK <= TCK_700MHZ) { -+ ctrl->tCK = TCK_700MHZ; -+ ctrl->base_freq = 100; -+ ctrl->mem_clock_mhz = 700; -+ -+ } else if (ctrl->tCK <= TCK_666MHZ) { -+ ctrl->tCK = TCK_666MHZ; -+ ctrl->base_freq = 133; -+ ctrl->mem_clock_mhz = 666; -+ -+ } else if (ctrl->tCK <= TCK_533MHZ) { -+ ctrl->tCK = TCK_533MHZ; -+ ctrl->base_freq = 133; -+ ctrl->mem_clock_mhz = 533; -+ -+ } else if (ctrl->tCK <= TCK_400MHZ) { -+ ctrl->tCK = TCK_400MHZ; -+ ctrl->base_freq = 133; -+ ctrl->mem_clock_mhz = 400; -+ -+ } else { -+ ctrl->tCK = 0; -+ ctrl->base_freq = 1; -+ ctrl->mem_clock_mhz = 0; -+ return; -+ } -+ if (!pll_ref100 && ctrl->base_freq == 100) { -+ /* Skip unsupported frequency */ -+ ctrl->tCK++; -+ normalize_tck(ctrl, pll_ref100); -+ } -+} -+ -+#define MIN_CAS 4 -+#define MAX_CAS 24 -+ -+static uint8_t find_compatible_cas(struct sysinfo *ctrl) -+{ -+ printk(RAM_DEBUG, "With tCK %u, try CAS: ", ctrl->tCK); -+ const uint8_t cas_lower = MAX(MIN_CAS, DIV_ROUND_UP(ctrl->tAA, ctrl->tCK)); -+ const uint8_t cas_upper = MIN(MAX_CAS, 19); /* JEDEC MR0 limit */ -+ -+ if (!(ctrl->cas_supported >> (cas_lower - MIN_CAS))) { -+ printk(RAM_DEBUG, "DIMMs do not support CAS >= %u\n", cas_lower); -+ ctrl->tCK++; -+ return 0; -+ } -+ for (uint8_t cas = cas_lower; cas <= cas_upper; cas++) { -+ printk(RAM_DEBUG, "%u ", cas); -+ if (ctrl->cas_supported & BIT(cas - MIN_CAS)) { -+ printk(RAM_DEBUG, "OK\n"); -+ return cas; -+ } -+ } -+ return 0; -+} -+ -+static enum raminit_status find_cas_tck(struct sysinfo *ctrl) -+{ -+ /** TODO: Honor all possible PLL_REF100_CFG values **/ -+ uint8_t pll_ref100 = (pci_read_config32(HOST_BRIDGE, CAPID0_B) >> 21) & 0x7; -+ printk(RAM_DEBUG, "PLL_REF100_CFG value: 0x%x\n", pll_ref100); -+ printk(RAM_DEBUG, "100MHz reference clock support: %s\n", pll_ref100 ? "yes" : "no"); -+ -+ uint8_t selected_cas; -+ while (true) { -+ /* Round tCK up so that it is a multiple of either 133 or 100 MHz */ -+ normalize_tck(ctrl, pll_ref100); -+ if (!ctrl->tCK) { -+ printk(BIOS_ERR, "Couldn't find compatible clock / CAS settings\n"); -+ return RAMINIT_STATUS_MPLL_INIT_FAILURE; -+ } -+ selected_cas = find_compatible_cas(ctrl); -+ if (selected_cas) -+ break; -+ -+ ctrl->tCK++; -+ } -+ printk(BIOS_DEBUG, "Found compatible clock / CAS settings\n"); -+ printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", NS2MHZ_DIV256 / ctrl->tCK); -+ printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", selected_cas); -+ ctrl->multiplier = get_mem_multiplier(ctrl); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+enum raminit_status initialise_mpll(struct sysinfo *ctrl) -+{ -+ if (ctrl->tCK > TCK_400MHZ) { -+ printk(BIOS_ERR, "tCK is too slow. Increasing to 400 MHz as last resort\n"); -+ ctrl->tCK = TCK_400MHZ; -+ } -+ while (true) { -+ if (!ctrl->qclkps) { -+ const enum raminit_status status = find_cas_tck(ctrl); -+ if (status) -+ return status; -+ } -+ -+ /* -+ * Unlike previous generations, Haswell's MPLL won't shut down if the -+ * requested frequency isn't supported. But we cannot reinitialize it. -+ * Another different thing: MPLL registers are 4-bit instead of 8-bit. -+ */ -+ -+ /** FIXME: Obtain current clock frequency if we want to skip this **/ -+ //if (mchbar_read32(MC_BIOS_DATA) != 0) -+ // break; -+ -+ uint32_t mc_bios_req = ctrl->multiplier; -+ if (ctrl->base_freq == 100) { -+ /* Use 100 MHz reference clock */ -+ mc_bios_req |= BIT(4); -+ } -+ mc_bios_req |= BIT(31); -+ printk(RAM_DEBUG, "MC_BIOS_REQ = 0x%08x\n", mc_bios_req); -+ printk(BIOS_DEBUG, "MPLL busy... "); -+ mchbar_write32(MC_BIOS_REQ, mc_bios_req); -+ -+ for (unsigned int i = 0; i <= 5000; i++) { -+ if (!(mchbar_read32(MC_BIOS_REQ) & BIT(31))) { -+ printk(BIOS_DEBUG, "done in %u us\n", i); -+ break; -+ } -+ udelay(1); -+ } -+ if (mchbar_read32(MC_BIOS_REQ) & BIT(31)) -+ printk(BIOS_DEBUG, "did not lock\n"); -+ -+ /* Verify locked frequency */ -+ const uint32_t mc_bios_data = mchbar_read32(MC_BIOS_DATA); -+ printk(RAM_DEBUG, "MC_BIOS_DATA = 0x%08x\n", mc_bios_data); -+ if ((mc_bios_data & 0xf) >= ctrl->multiplier) -+ break; -+ -+ printk(BIOS_DEBUG, "Retrying at a lower frequency\n\n"); -+ ctrl->tCK++; -+ } -+ if (!ctrl->mem_clock_mhz) { -+ printk(BIOS_ERR, "Could not program MPLL frequency\n"); -+ return RAMINIT_STATUS_MPLL_INIT_FAILURE; -+ } -+ printk(BIOS_DEBUG, "MPLL frequency is set to: %u MHz ", ctrl->mem_clock_mhz); -+ ctrl->mem_clock_fs = 1000000000 / ctrl->mem_clock_mhz; -+ printk(BIOS_DEBUG, "(period: %u femtoseconds)\n", ctrl->mem_clock_fs); -+ ctrl->qclkps = ctrl->mem_clock_fs / 2000; -+ printk(BIOS_DEBUG, "Quadrature clock period: %u picoseconds\n", ctrl->qclkps); -+ return wait_for_first_rcomp(); -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c -new file mode 100644 -index 0000000000..d45b608dd3 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c -@@ -0,0 +1,22 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+enum raminit_status wait_for_first_rcomp(void) -+{ -+ struct stopwatch timer; -+ stopwatch_init_msecs_expire(&timer, 2000); -+ do { -+ if (mchbar_read32(RCOMP_TIMER) & BIT(16)) -+ return RAMINIT_STATUS_SUCCESS; -+ -+ } while (!stopwatch_expired(&timer)); -+ printk(BIOS_ERR, "Timed out waiting for RCOMP to complete\n"); -+ return RAMINIT_STATUS_POLL_TIMEOUT; -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 19ec5859ac..bf745e943f 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -19,7 +19,8 @@ struct task_entry { - }; - - static const struct task_entry cold_boot[] = { -- { collect_spd_info, true, "PROCSPD", }, -+ { collect_spd_info, true, "PROCSPD", }, -+ { initialise_mpll, true, "INITMPLL", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 8078c9c386..15a1550424 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -24,6 +24,8 @@ enum raminit_status { - RAMINIT_STATUS_SUCCESS = 0, - RAMINIT_STATUS_NO_MEMORY_INSTALLED, - RAMINIT_STATUS_UNSUPPORTED_MEMORY, -+ RAMINIT_STATUS_MPLL_INIT_FAILURE, -+ RAMINIT_STATUS_POLL_TIMEOUT, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -83,10 +85,19 @@ struct sysinfo { - uint8_t rankmap[NUM_CHANNELS]; - uint8_t rank_mirrored[NUM_CHANNELS]; - uint32_t channel_size_mb[NUM_CHANNELS]; -+ -+ uint8_t base_freq; /* Memory base frequency, either 100 or 133 MHz */ -+ uint32_t multiplier; -+ uint32_t mem_clock_mhz; -+ uint32_t mem_clock_fs; /* Memory clock period in femtoseconds */ -+ uint32_t qclkps; /* Quadrature clock period in picoseconds */ - }; - - void raminit_main(enum raminit_boot_mode bootmode); - - enum raminit_status collect_spd_info(struct sysinfo *ctrl); -+enum raminit_status initialise_mpll(struct sysinfo *ctrl); -+ -+enum raminit_status wait_for_first_rcomp(void); - - #endif -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 5610e7089a..45f8174995 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -13,6 +13,8 @@ - #define MC_INIT_STATE_G 0x5030 - #define MRC_REVISION 0x5034 /* MRC Revision */ - -+#define RCOMP_TIMER 0x5084 -+ - #define MC_LOCK 0x50fc /* Memory Controller Lock register */ - - #define GFXVTBAR 0x5400 /* Base address for IGD */ -@@ -61,6 +63,7 @@ - - #define BIOS_RESET_CPL 0x5da8 /* 8-bit */ - -+#define MC_BIOS_REQ 0x5e00 /* Memory frequency request register */ - #define MC_BIOS_DATA 0x5e04 /* Miscellaneous information for BIOS */ - #define SAPMCTL 0x5f00 - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0044-haswell-NRI-Add-final-raminit-steps.patch b/config/coreboot/default/patches/0044-haswell-NRI-Add-final-raminit-steps.patch new file mode 100644 index 00000000..62cae936 --- /dev/null +++ b/config/coreboot/default/patches/0044-haswell-NRI-Add-final-raminit-steps.patch @@ -0,0 +1,570 @@ +From 9d1b945702006db5678c5dc81699699bf6e6741a Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sun, 8 May 2022 14:29:05 +0200 +Subject: [PATCH 44/51] haswell NRI: Add final raminit steps + +Implement the remaining raminit steps. Although many training steps are +missing, this is enough to boot on the Asrock B85M Pro4. + +Change-Id: I94f3b65f0218d4da4fda4d84592dfd91f77f8f21 +Signed-off-by: Angel Pons +--- + src/northbridge/intel/haswell/Kconfig | 4 +- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/activate_mc.c | 388 ++++++++++++++++++ + .../haswell/native_raminit/raminit_main.c | 5 +- + .../haswell/native_raminit/raminit_native.c | 5 +- + .../haswell/native_raminit/raminit_native.h | 2 + + .../haswell/native_raminit/reg_structs.h | 12 + + .../intel/haswell/registers/mchbar.h | 7 + + 8 files changed, 416 insertions(+), 8 deletions(-) + create mode 100644 src/northbridge/intel/haswell/native_raminit/activate_mc.c + +diff --git a/src/northbridge/intel/haswell/Kconfig b/src/northbridge/intel/haswell/Kconfig +index 4b83a25bc1..c6ab27184e 100644 +--- a/src/northbridge/intel/haswell/Kconfig ++++ b/src/northbridge/intel/haswell/Kconfig +@@ -11,12 +11,12 @@ config NORTHBRIDGE_INTEL_HASWELL + if NORTHBRIDGE_INTEL_HASWELL + + config USE_NATIVE_RAMINIT +- bool "[NOT WORKING] Use native raminit" ++ bool "[NOT COMPLETE] Use native raminit" + default n + select HAVE_DEBUG_RAM_SETUP + help + Select if you want to use coreboot implementation of raminit rather than +- MRC.bin. Currently incomplete and does not boot. ++ MRC.bin. Currently incomplete and does not support S3 resume. + + config HASWELL_VBOOT_IN_BOOTBLOCK + depends on VBOOT +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index 40c2f5e014..d97da72890 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -1,5 +1,6 @@ + ## SPDX-License-Identifier: GPL-2.0-or-later + ++romstage-y += activate_mc.c + romstage-y += change_margin.c + romstage-y += configure_mc.c + romstage-y += ddr3.c +diff --git a/src/northbridge/intel/haswell/native_raminit/activate_mc.c b/src/northbridge/intel/haswell/native_raminit/activate_mc.c +new file mode 100644 +index 0000000000..78a7ad27ef +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/activate_mc.c +@@ -0,0 +1,388 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++static void update_internal_clocks_on(struct sysinfo *ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ bool clocks_on = false; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const union ddr_data_control_1_reg data_control_1 = { ++ .raw = ctrl->dq_control_1[channel][byte], ++ }; ++ const int8_t o_on = data_control_1.odt_delay; ++ const int8_t s_on = data_control_1.sense_amp_delay; ++ const int8_t o_off = data_control_1.odt_duration; ++ const int8_t s_off = data_control_1.sense_amp_duration; ++ if (o_on + o_off >= 7 || s_on + s_off >= 7) { ++ clocks_on = true; ++ break; ++ } ++ } ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.internal_clocks_on = clocks_on; ++ ctrl->dq_control_0[channel] = data_control_0.raw; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ } ++} ++ ++/* Switch off unused segments of the SDLL to save power */ ++static void update_sdll_length(struct sysinfo *ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ uint8_t max_pi = 0; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ const uint8_t rx_dqs_p = ctrl->rxdqsp[channel][rank][byte]; ++ const uint8_t rx_dqs_n = ctrl->rxdqsn[channel][rank][byte]; ++ max_pi = MAX(max_pi, MAX(rx_dqs_p, rx_dqs_n)); ++ } ++ /* Update SDLL length for power savings */ ++ union ddr_data_control_1_reg data_control_1 = { ++ .raw = ctrl->dq_control_1[channel][byte], ++ }; ++ /* Calculate which segments to turn off */ ++ data_control_1.sdll_segment_disable = (7 - (max_pi >> 3)) & ~1; ++ ctrl->dq_control_1[channel][byte] = data_control_1.raw; ++ mchbar_write32(DQ_CONTROL_1(channel, byte), data_control_1.raw); ++ } ++ } ++} ++ ++static void set_rx_clk_stg_num(struct sysinfo *ctrl, const uint8_t channel) ++{ ++ const uint8_t rcven_drift = ctrl->lpddr ? DIV_ROUND_UP(tDQSCK_DRIFT, ctrl->qclkps) : 1; ++ uint8_t max_rcven = 0; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ max_rcven = MAX(max_rcven, ctrl->rcven[channel][rank][byte] / 64); ++ } ++ const union ddr_data_control_1_reg ddr_data_control_1 = { ++ .raw = ctrl->dq_control_1[channel][0], ++ }; ++ const bool lpddr_long_odt = ddr_data_control_1.lpddr_long_odt_en; ++ const uint8_t rcven_turnoff = max_rcven + 18 + 2 * rcven_drift + lpddr_long_odt; ++ const union ddr_data_control_0_reg ddr_data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ union ddr_data_control_2_reg ddr_data_control_2 = { ++ .raw = ctrl->dq_control_2[channel][byte], ++ }; ++ if (ddr_data_control_0.odt_samp_extend_en) { ++ if (ddr_data_control_2.rx_clk_stg_num < rcven_turnoff) ++ ddr_data_control_2.rx_clk_stg_num = rcven_turnoff; ++ } else { ++ const int8_t o_on = ddr_data_control_1.odt_delay; ++ const int8_t o_off = ddr_data_control_1.odt_duration; ++ ddr_data_control_2.rx_clk_stg_num = MAX(17, o_on + o_off + 14); ++ } ++ ctrl->dq_control_2[channel][byte] = ddr_data_control_2.raw; ++ mchbar_write32(DQ_CONTROL_2(channel, byte), ddr_data_control_2.raw); ++ } ++} ++ ++#define SELF_REFRESH_IDLE_COUNT 0x200 ++ ++static void enter_sr(void) ++{ ++ mchbar_write32(PM_SREF_CONFIG, SELF_REFRESH_IDLE_COUNT | BIT(16)); ++ udelay(1); ++} ++ ++enum power_down_mode { ++ PDM_NO_PD = 0, ++ PDM_APD = 1, ++ PDM_PPD = 2, ++ PDM_PPD_DLL_OFF = 6, ++}; ++ ++static void power_down_config(struct sysinfo *ctrl) ++{ ++ const enum power_down_mode pd_mode = ctrl->lpddr ? PDM_PPD : PDM_PPD_DLL_OFF; ++ mchbar_write32(PM_PDWN_CONFIG, pd_mode << 12 | 0x40); ++} ++ ++static void train_power_modes_post(struct sysinfo *ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* Adjust tCPDED and tPRPDEN */ ++ if (ctrl->mem_clock_mhz >= 933) ++ ctrl->tc_bankrank_d[channel].tCPDED = 2; ++ ++ if (ctrl->mem_clock_mhz >= 1066) ++ ctrl->tc_bankrank_d[channel].tPRPDEN = 2; ++ ++ mchbar_write32(TC_BANK_RANK_D_ch(channel), ctrl->tc_bankrank_d[channel].raw); ++ } ++ power_down_config(ctrl); ++ mchbar_write32(MCDECS_CBIT, BIT(30)); /* dis_msg_clk_gate */ ++} ++ ++static uint8_t compute_burst_end_odt_delay(const struct sysinfo *const ctrl) ++{ ++ /* Must be disabled for LPDDR */ ++ if (ctrl->lpddr) ++ return 0; ++ ++ const uint8_t beod = MIN(7, DIV_ROUND_CLOSEST(14300 * 20 / 100, ctrl->qclkps)); ++ if (beod < 3) ++ return 0; ++ ++ if (beod < 4) ++ return 4; ++ ++ return beod; ++} ++ ++static void program_burst_end_odt_delay(struct sysinfo *ctrl) ++{ ++ /* Program burst_end_odt_delay - it should be zero during training steps */ ++ const uint8_t beod = compute_burst_end_odt_delay(ctrl); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ union ddr_data_control_1_reg ddr_data_control_1 = { ++ .raw = ctrl->dq_control_1[channel][byte], ++ }; ++ ddr_data_control_1.burst_end_odt_delay = beod; ++ ctrl->dq_control_1[channel][byte] = ddr_data_control_1.raw; ++ mchbar_write32(DQ_CONTROL_1(channel, byte), ddr_data_control_1.raw); ++ } ++ } ++} ++ ++/* ++ * Return a random value to use for scrambler seeds. Try to use RDRAND ++ * first and fall back to hardcoded values if RDRAND does not succeed. ++ */ ++static uint16_t get_random_number(const uint8_t channel) ++{ ++ /* The RDRAND instruction is only available 100k cycles after reset */ ++ for (size_t i = 0; i < 100000; i++) { ++ uint32_t status; ++ uint32_t random; ++ /** TODO: Clean up asm **/ ++ __asm__ __volatile__( ++ "\n\t .byte 0x0F, 0xC7, 0xF0" ++ "\n\t movl %%eax, %0" ++ "\n\t pushf" ++ "\n\t pop %%eax" ++ "\n\t movl %%eax, %1" ++ : "=m"(random), ++ "=m"(status) ++ : /* No inputs */ ++ : "eax", "cc"); ++ ++ /* Only consider non-zero random values as valid */ ++ if (status & 1 && random) ++ return random; ++ } ++ ++ /* https://xkcd.com/221 */ ++ if (channel) ++ return 0x28f4; ++ else ++ return 0x893e; ++} ++ ++/* Work around "error: 'typeof' applied to a bit-field" */ ++static inline uint32_t max(const uint32_t a, const uint32_t b) ++{ ++ return MAX(a, b); ++} ++ ++enum raminit_status activate_mc(struct sysinfo *ctrl) ++{ ++ const bool enable_scrambling = true; ++ const bool enable_cmd_tristate = true; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ if (enable_scrambling && ctrl->stepping < STEPPING_C0) { ++ /* Make sure tRDRD_(sr, dr, dd) are at least 6 for scrambler W/A */ ++ union tc_bank_rank_a_reg tc_bank_rank_a = { ++ .raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)), ++ }; ++ tc_bank_rank_a.tRDRD_sr = max(tc_bank_rank_a.tRDRD_sr, 6); ++ tc_bank_rank_a.tRDRD_dr = max(tc_bank_rank_a.tRDRD_dr, 6); ++ tc_bank_rank_a.tRDRD_dd = max(tc_bank_rank_a.tRDRD_dd, 6); ++ mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw); ++ } ++ if (enable_scrambling) { ++ const union ddr_scramble_reg ddr_scramble = { ++ .scram_key = get_random_number(channel), ++ .scram_en = 1, ++ }; ++ mchbar_write32(DDR_SCRAMBLE_ch(channel), ddr_scramble.raw); ++ } ++ if (ctrl->tCMD == 1) { ++ /* If we are in 1N mode, enable and set command rate limit to 3 */ ++ union mcmain_command_rate_limit_reg cmd_rate_limit = { ++ .raw = mchbar_read32(COMMAND_RATE_LIMIT_ch(channel)), ++ }; ++ cmd_rate_limit.enable_cmd_limit = 1; ++ cmd_rate_limit.cmd_rate_limit = 3; ++ mchbar_write32(COMMAND_RATE_LIMIT_ch(channel), cmd_rate_limit.raw); ++ } ++ if (enable_cmd_tristate) { ++ /* Enable command tri-state at the end of training */ ++ union tc_bank_rank_a_reg tc_bank_rank_a = { ++ .raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)), ++ }; ++ tc_bank_rank_a.cmd_3st_dis = 0; ++ mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw); ++ } ++ /* Set MC to normal mode and clean the ODT and CKE */ ++ mchbar_write32(REUT_ch_SEQ_CFG(channel), REUT_MODE_NOP << 12); ++ /* Set again the rank occupancy */ ++ mchbar_write8(MC_INIT_STATE_ch(channel), ctrl->rankmap[channel]); ++ if (ctrl->is_ecc) { ++ /* Enable ECC I/O and logic */ ++ union mad_dimm_reg mad_dimm = { ++ .raw = mchbar_read32(MAD_DIMM(channel)), ++ }; ++ mad_dimm.ecc_mode = 3; ++ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); ++ } ++ } ++ ++ if (!is_hsw_ult()) ++ update_internal_clocks_on(ctrl); ++ ++ update_sdll_length(ctrl); ++ ++ program_burst_end_odt_delay(ctrl); ++ ++ if (is_hsw_ult()) { ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ set_rx_clk_stg_num(ctrl, channel); ++ } ++ /** TODO: Program DDRPL_CR_DDR_TX_DELAY if Memory Trace is enabled **/ ++ } ++ ++ /* Enable periodic COMP */ ++ mchbar_write32(M_COMP, (union pcu_comp_reg) { ++ .comp_interval = COMP_INT, ++ }.raw); ++ ++ /* Enable the power mode before PCU starts working */ ++ train_power_modes_post(ctrl); ++ ++ /* Set idle timer and self refresh enable bits */ ++ enter_sr(); ++ ++ /** FIXME: Do not hardcode power weights and RAPL settings **/ ++ mchbar_write32(0x5888, 0x00000d0d); ++ mchbar_write32(0x5884, 0x00000004); /* 58.2 pJ */ ++ ++ mchbar_write32(0x58e0, 0); ++ mchbar_write32(0x58e4, 0); ++ ++ mchbar_write32(0x5890, 0xffff); ++ mchbar_write32(0x5894, 0xffff); ++ mchbar_write32(0x5898, 0xffff); ++ mchbar_write32(0x589c, 0xffff); ++ mchbar_write32(0x58d0, 0xffff); ++ mchbar_write32(0x58d4, 0xffff); ++ mchbar_write32(0x58d8, 0xffff); ++ mchbar_write32(0x58dc, 0xffff); ++ ++ /* Overwrite thermal parameters */ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ mchbar_write32(_MCMAIN_C(0x42ec, channel), 0x0000000f); ++ mchbar_write32(_MCMAIN_C(0x42f0, channel), 0x00000009); ++ mchbar_write32(_MCMAIN_C(0x42f4, channel), 0x00000093); ++ mchbar_write32(_MCMAIN_C(0x42f8, channel), 0x00000087); ++ mchbar_write32(_MCMAIN_C(0x42fc, channel), 0x000000de); ++ ++ /** TODO: Differs for LPDDR **/ ++ mchbar_write32(PM_THRT_CKE_MIN_ch(channel), 0x30); ++ } ++ mchbar_write32(PCU_DDR_PTM_CTL, 0x40); ++ return RAMINIT_STATUS_SUCCESS; ++} ++ ++static void mc_lockdown(void) ++{ ++ /* Lock memory controller registers */ ++ mchbar_write32(MC_LOCK, 0x8f); ++ ++ /* MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK is set when programming the memory map */ ++ ++ /* Lock memory map registers */ ++ pci_or_config16(HOST_BRIDGE, GGC, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, DPR, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, MESEG_LIMIT, 1 << 10); ++ pci_or_config32(HOST_BRIDGE, REMAPBASE, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, REMAPLIMIT, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, TOM, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, TOUUD, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, BDSM, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, BGSM, 1 << 0); ++ pci_or_config32(HOST_BRIDGE, TOLUD, 1 << 0); ++} ++ ++enum raminit_status raminit_done(struct sysinfo *ctrl) ++{ ++ union mc_init_state_g_reg mc_init_state_g = { ++ .raw = mchbar_read32(MC_INIT_STATE_G), ++ }; ++ mc_init_state_g.refresh_enable = 1; ++ mc_init_state_g.pu_mrc_done = 1; ++ mc_init_state_g.mrc_done = 1; ++ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); ++ ++ /* Lock the memory controller to enable normal operation */ ++ mc_lockdown(); ++ ++ /* Poll for mc_init_done_ack to make sure memory initialization is complete */ ++ printk(BIOS_DEBUG, "Waiting for mc_init_done acknowledgement... "); ++ ++ struct stopwatch timer; ++ stopwatch_init_msecs_expire(&timer, 2000); ++ do { ++ mc_init_state_g.raw = mchbar_read32(MC_INIT_STATE_G); ++ ++ /* DRAM will NOT work without the acknowledgement. There is no hope. */ ++ if (stopwatch_expired(&timer)) ++ die("\nTimed out waiting for mc_init_done acknowledgement\n"); ++ ++ } while (mc_init_state_g.mc_init_done_ack == 0); ++ printk(BIOS_DEBUG, "DONE!\n"); ++ ++ /* Provide some data for the graphics driver. Yes, it's hardcoded. */ ++ mchbar_write32(SSKPD + 0, 0x05a2404f); ++ mchbar_write32(SSKPD + 4, 0x140000a0); ++ return RAMINIT_STATUS_SUCCESS; ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 1ff23be615..3a65fb01fb 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -63,6 +63,8 @@ static const struct task_entry cold_boot[] = { + { train_receive_enable, true, "RCVET", }, + { train_read_mpr, true, "RDMPRT", }, + { train_jedec_write_leveling, true, "JWRL", }, ++ { activate_mc, true, "ACTIVATE", }, ++ { raminit_done, true, "RAMINITEND", }, + }; + + /* Return a generic stepping value to make stepping checks simpler */ +@@ -143,7 +145,4 @@ void raminit_main(const enum raminit_boot_mode bootmode) + + if (status != RAMINIT_STATUS_SUCCESS) + die("Memory initialization was met with utmost failure and misery\n"); +- +- /** TODO: Implement the required magic **/ +- die("NATIVE RAMINIT: More Magic (tm) required.\n"); + } +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c +index 2fed93de5b..5f7ceec222 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c +@@ -199,8 +199,6 @@ void perform_raminit(const int s3resume) + else + me_status = ME_INIT_STATUS_SUCCESS; + +- /** TODO: Remove this once raminit is implemented **/ +- me_status = ME_INIT_STATUS_ERROR; + intel_early_me_init_done(me_status); + } + +@@ -214,7 +212,8 @@ void perform_raminit(const int s3resume) + } + + /* Save training data on non-S3 resumes */ +- if (!s3resume) ++ /** TODO: Enable this once training data is populated **/ ++ if (0 && !s3resume) + save_mrc_data(&md); + + /** TODO: setup_sdram_meminfo **/ +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index d6b11b9d3c..a0a913f926 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -448,6 +448,8 @@ enum raminit_status do_jedec_init(struct sysinfo *ctrl); + enum raminit_status train_receive_enable(struct sysinfo *ctrl); + enum raminit_status train_read_mpr(struct sysinfo *ctrl); + enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); ++enum raminit_status activate_mc(struct sysinfo *ctrl); ++enum raminit_status raminit_done(struct sysinfo *ctrl); + + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); +diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +index a0e36ed082..0d9aaa1f7c 100644 +--- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h ++++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h +@@ -294,6 +294,18 @@ union ddr_cke_ctl_controls_reg { + uint32_t raw; + }; + ++union ddr_scramble_reg { ++ struct __packed { ++ uint32_t scram_en : 1; // Bits 0:0 ++ uint32_t scram_key : 16; // Bits 16:1 ++ uint32_t clk_gate_ab : 2; // Bits 18:17 ++ uint32_t clk_gate_c : 2; // Bits 20:19 ++ uint32_t en_dbi_ab : 1; // Bits 21:21 ++ uint32_t : 10; // Bits 31:17 ++ }; ++ uint32_t raw; ++}; ++ + union ddr_scram_misc_control_reg { + struct __packed { + uint32_t wl_wake_cycles : 2; // Bits 1:0 +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 7c0b5a49de..49a215aa71 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -20,6 +20,7 @@ + + #define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) + ++#define DQ_CONTROL_1(ch, byte) _DDRIO_C_R_B(0x0060, ch, 0, byte) + #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) + #define DDR_DATA_OFFSET_TRAIN_ch_b(ch, byte) _DDRIO_C_R_B(0x0070, ch, 0, byte) + #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) +@@ -147,6 +148,8 @@ + #define QCLK_ch_LDAT_SDAT(ch) _MCMAIN_C(0x42d4, ch) + #define QCLK_ch_LDAT_DATA_IN_x(ch, x) _MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */ + ++#define PM_THRT_CKE_MIN_ch(ch) _MCMAIN_C(0x4328, ch) ++ + #define REUT_GLOBAL_CTL 0x4800 + #define REUT_GLOBAL_ERR 0x4804 + +@@ -175,6 +178,8 @@ + + #define MCSCHEDS_DFT_MISC 0x4c30 + ++#define PM_PDWN_CONFIG 0x4cb0 ++ + #define REUT_ERR_DATA_STATUS 0x4ce0 + + #define REUT_MISC_CKE_CTRL 0x4d90 +@@ -186,8 +191,10 @@ + #define MAD_CHNL 0x5000 /* Address Decoder Channel Configuration */ + #define MAD_DIMM(ch) (0x5004 + (ch) * 4) + #define MAD_ZR 0x5014 ++#define MCDECS_CBIT 0x501c + #define MC_INIT_STATE_G 0x5030 + #define MRC_REVISION 0x5034 /* MRC Revision */ ++#define PM_SREF_CONFIG 0x5060 + + #define RCOMP_TIMER 0x5084 + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0044-haswell-NRI-Post-process-selected-timings.patch b/config/coreboot/default/patches/0044-haswell-NRI-Post-process-selected-timings.patch deleted file mode 100644 index 69e32d2f..00000000 --- a/config/coreboot/default/patches/0044-haswell-NRI-Post-process-selected-timings.patch +++ /dev/null @@ -1,249 +0,0 @@ -From 876011559681881d950ad3b6742b40322f1f5a6d Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sat, 7 May 2022 16:29:55 +0200 -Subject: [PATCH 44/65] haswell NRI: Post-process selected timings - -Once the MPLL has been initialised, convert the timings from the SPD to -be in DCLKs, which is what the hardware expects. In addition, calculate -the values for tREFI and tXP. - -Change-Id: Id02caf858f75b9e08016762b3aefda282b274386 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/lookup_timings.c | 62 +++++++++++ - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 8 ++ - .../haswell/native_raminit/spd_bitmunching.c | 100 ++++++++++++++++++ - 5 files changed, 172 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/lookup_timings.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index c125d84f0b..2769e0bbb4 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -1,5 +1,6 @@ - ## SPDX-License-Identifier: GPL-2.0-or-later - -+romstage-y += lookup_timings.c - romstage-y += init_mpll.c - romstage-y += io_comp_control.c - romstage-y += raminit_main.c -diff --git a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c -new file mode 100644 -index 0000000000..8b81c7c341 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c -@@ -0,0 +1,62 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+ -+#include "raminit_native.h" -+ -+struct timing_lookup { -+ uint32_t clock; -+ uint32_t value; -+}; -+ -+static uint32_t lookup_timing( -+ const uint32_t mem_clock_mhz, -+ const struct timing_lookup *const lookup, -+ const size_t length) -+{ -+ /* Fall back to the last index */ -+ size_t i; -+ for (i = 0; i < length - 1; i++) { -+ /* Account for imprecise frequency values */ -+ if ((mem_clock_mhz - 5) <= lookup[i].clock) -+ break; -+ } -+ return lookup[i].value; -+} -+ -+static const uint32_t fmax = UINT32_MAX; -+ -+uint8_t get_tCWL(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 400, 5 }, -+ { 533, 6 }, -+ { 666, 7 }, -+ { 800, 8 }, -+ { 933, 9 }, -+ { 1066, 10 }, -+ { 1200, 11 }, -+ { fmax, 12 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -+ -+/* tREFI = 7800 ns * DDR MHz */ -+uint32_t get_tREFI(const uint32_t mem_clock_mhz) -+{ -+ return (mem_clock_mhz * 7800) / 1000; -+} -+ -+uint32_t get_tXP(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 400, 3 }, -+ { 666, 4 }, -+ { 800, 5 }, -+ { 933, 6 }, -+ { 1066, 7 }, -+ { fmax, 8 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index bf745e943f..2fea658415 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -21,6 +21,7 @@ struct task_entry { - static const struct task_entry cold_boot[] = { - { collect_spd_info, true, "PROCSPD", }, - { initialise_mpll, true, "INITMPLL", }, -+ { convert_timings, true, "CONVTIM", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 15a1550424..e0ebd3a2a7 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -79,6 +79,9 @@ struct sysinfo { - uint32_t tCWL; - uint32_t tCMD; - -+ uint32_t tREFI; -+ uint32_t tXP; -+ - uint8_t lanes; /* 8 or 9 */ - uint8_t chanmap; - uint8_t dpc[NUM_CHANNELS]; /* DIMMs per channel */ -@@ -97,7 +100,12 @@ void raminit_main(enum raminit_boot_mode bootmode); - - enum raminit_status collect_spd_info(struct sysinfo *ctrl); - enum raminit_status initialise_mpll(struct sysinfo *ctrl); -+enum raminit_status convert_timings(struct sysinfo *ctrl); - - enum raminit_status wait_for_first_rcomp(void); - -+uint8_t get_tCWL(uint32_t mem_clock_mhz); -+uint32_t get_tREFI(uint32_t mem_clock_mhz); -+uint32_t get_tXP(uint32_t mem_clock_mhz); -+ - #endif -diff --git a/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c b/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c -index eff993800b..4f7fe46494 100644 ---- a/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c -+++ b/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c -@@ -204,3 +204,103 @@ enum raminit_status collect_spd_info(struct sysinfo *ctrl) - get_spd_data(ctrl); - return find_common_spd_parameters(ctrl); - } -+ -+#define MIN_CWL 5 -+#define MAX_CWL 12 -+ -+/* Except for tCK, hardware expects all timing values in DCLKs, not nanoseconds */ -+enum raminit_status convert_timings(struct sysinfo *ctrl) -+{ -+ /* -+ * Obtain all required timing values, in DCLKs. -+ */ -+ -+ /* Convert primary timings from nanoseconds to DCLKs */ -+ ctrl->tAA = DIV_ROUND_UP(ctrl->tAA, ctrl->tCK); -+ ctrl->tWR = DIV_ROUND_UP(ctrl->tWR, ctrl->tCK); -+ ctrl->tRCD = DIV_ROUND_UP(ctrl->tRCD, ctrl->tCK); -+ ctrl->tRRD = DIV_ROUND_UP(ctrl->tRRD, ctrl->tCK); -+ ctrl->tRP = DIV_ROUND_UP(ctrl->tRP, ctrl->tCK); -+ ctrl->tRAS = DIV_ROUND_UP(ctrl->tRAS, ctrl->tCK); -+ ctrl->tRC = DIV_ROUND_UP(ctrl->tRC, ctrl->tCK); -+ ctrl->tRFC = DIV_ROUND_UP(ctrl->tRFC, ctrl->tCK); -+ ctrl->tWTR = DIV_ROUND_UP(ctrl->tWTR, ctrl->tCK); -+ ctrl->tRTP = DIV_ROUND_UP(ctrl->tRTP, ctrl->tCK); -+ ctrl->tFAW = DIV_ROUND_UP(ctrl->tFAW, ctrl->tCK); -+ ctrl->tCWL = DIV_ROUND_UP(ctrl->tCWL, ctrl->tCK); -+ ctrl->tCMD = DIV_ROUND_UP(ctrl->tCMD, ctrl->tCK); -+ -+ /* Constrain primary timings to hardware limits */ -+ /** TODO: complain when clamping? **/ -+ ctrl->tAA = clamp_u32(4, ctrl->tAA, 24); -+ ctrl->tWR = clamp_u32(5, ctrl->tWR, 16); -+ ctrl->tRCD = clamp_u32(4, ctrl->tRCD, 20); -+ ctrl->tRRD = clamp_u32(4, ctrl->tRRD, 65535); -+ ctrl->tRP = clamp_u32(4, ctrl->tRP, 15); -+ ctrl->tRAS = clamp_u32(10, ctrl->tRAS, 40); -+ ctrl->tRC = clamp_u32(1, ctrl->tRC, 4095); -+ ctrl->tRFC = clamp_u32(1, ctrl->tRFC, 511); -+ ctrl->tWTR = clamp_u32(4, ctrl->tWTR, 10); -+ ctrl->tRTP = clamp_u32(4, ctrl->tRTP, 15); -+ ctrl->tFAW = clamp_u32(10, ctrl->tFAW, 54); -+ -+ /** TODO: Honor tREFI from XMP **/ -+ ctrl->tREFI = get_tREFI(ctrl->mem_clock_mhz); -+ ctrl->tXP = get_tXP(ctrl->mem_clock_mhz); -+ -+ /* -+ * Check some values, and adjust them if necessary. -+ */ -+ -+ /* If tWR cannot be written into DDR3 MR0, adjust it */ -+ switch (ctrl->tWR) { -+ case 9: -+ case 11: -+ case 13: -+ case 15: -+ ctrl->tWR++; -+ } -+ -+ /* If tCWL is not supported or unspecified, look up a reasonable default */ -+ if (ctrl->tCWL < MIN_CWL || ctrl->tCWL > MAX_CWL) -+ ctrl->tCWL = get_tCWL(ctrl->mem_clock_mhz); -+ -+ /* This is needed to support ODT properly on 2DPC */ -+ if (ctrl->tAA - ctrl->tCWL > 4) -+ ctrl->tCWL = ctrl->tAA - 4; -+ -+ /* If tCMD is invalid, use a guesstimate default */ -+ if (!ctrl->tCMD) { -+ ctrl->tCMD = MAX(ctrl->dpc[0], ctrl->dpc[1]); -+ printk(RAM_DEBUG, "tCMD was zero, picking a guesstimate value\n"); -+ } -+ ctrl->tCMD = clamp_u32(1, ctrl->tCMD, 3); -+ -+ /* -+ * Print final timings. -+ */ -+ -+ /* tCK is special */ -+ printk(BIOS_DEBUG, "Selected tCK : %u ps\n", ctrl->tCK * 1000 / 256); -+ -+ /* Primary timings */ -+ printk(BIOS_DEBUG, "Selected tAA : %uT\n", ctrl->tAA); -+ printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR); -+ printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD); -+ printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD); -+ printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP); -+ printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS); -+ printk(BIOS_DEBUG, "Selected tRC : %uT\n", ctrl->tRC); -+ printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC); -+ printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR); -+ printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP); -+ printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW); -+ printk(BIOS_DEBUG, "Selected tCWL : %uT\n", ctrl->tCWL); -+ printk(BIOS_DEBUG, "Selected tCMD : %uT\n", ctrl->tCMD); -+ -+ /* Derived timings */ -+ printk(BIOS_DEBUG, "Selected tREFI : %uT\n", ctrl->tREFI); -+ printk(BIOS_DEBUG, "Selected tXP : %uT\n", ctrl->tXP); -+ -+ return RAMINIT_STATUS_SUCCESS; -+} --- -2.39.5 - diff --git a/config/coreboot/default/patches/0045-Haswell-NRI-Implement-fast-boot-path.patch b/config/coreboot/default/patches/0045-Haswell-NRI-Implement-fast-boot-path.patch new file mode 100644 index 00000000..af614a5f --- /dev/null +++ b/config/coreboot/default/patches/0045-Haswell-NRI-Implement-fast-boot-path.patch @@ -0,0 +1,722 @@ +From b6b89013630d535b68a005cede9e2540f273f4e7 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Sat, 13 Apr 2024 01:16:30 +0200 +Subject: [PATCH 45/51] Haswell NRI: Implement fast boot path + +When the memory configuration hasn't changed, there is no need to do +full memory training. Instead, boot firmware can use saved training +data to reinitialise the memory controller and memory. + +Unlike native RAM init for other platforms, Haswell does not save the +main structure (the "mighty ctrl" struct) to flash. Instead, separate +structures define the data to be saved, which can be smaller than the +main structure. + +This makes S3 suspend and resume work: RAM contents MUST be preserved +for a S3 resume to succeed, but RAM training destroys RAM contents. + +Change-Id: I06f6cd39ceecdca104fae89159f28e85cf7ff4e6 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/activate_mc.c | 17 + + .../intel/haswell/native_raminit/ddr3.c | 41 ++ + .../haswell/native_raminit/raminit_main.c | 34 +- + .../haswell/native_raminit/raminit_native.c | 30 +- + .../haswell/native_raminit/raminit_native.h | 18 + + .../haswell/native_raminit/save_restore.c | 387 ++++++++++++++++++ + 7 files changed, 504 insertions(+), 24 deletions(-) + create mode 100644 src/northbridge/intel/haswell/native_raminit/save_restore.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index d97da72890..8fdd17c542 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -13,6 +13,7 @@ romstage-y += raminit_main.c + romstage-y += raminit_native.c + romstage-y += ranges.c + romstage-y += reut.c ++romstage-y += save_restore.c + romstage-y += setup_wdb.c + romstage-y += spd_bitmunching.c + romstage-y += testing_io.c +diff --git a/src/northbridge/intel/haswell/native_raminit/activate_mc.c b/src/northbridge/intel/haswell/native_raminit/activate_mc.c +index 78a7ad27ef..0b3eb917da 100644 +--- a/src/northbridge/intel/haswell/native_raminit/activate_mc.c ++++ b/src/northbridge/intel/haswell/native_raminit/activate_mc.c +@@ -333,6 +333,23 @@ enum raminit_status activate_mc(struct sysinfo *ctrl) + return RAMINIT_STATUS_SUCCESS; + } + ++enum raminit_status normal_state(struct sysinfo *ctrl) ++{ ++ /* Enable periodic COMP */ ++ mchbar_write32(M_COMP, (union pcu_comp_reg) { ++ .comp_interval = COMP_INT, ++ }.raw); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* Set MC to normal mode and clean the ODT and CKE */ ++ mchbar_write32(REUT_ch_SEQ_CFG(channel), REUT_MODE_NOP << 12); ++ } ++ power_down_config(ctrl); ++ return RAMINIT_STATUS_SUCCESS; ++} ++ + static void mc_lockdown(void) + { + /* Lock memory controller registers */ +diff --git a/src/northbridge/intel/haswell/native_raminit/ddr3.c b/src/northbridge/intel/haswell/native_raminit/ddr3.c +index 6ddb11488b..9b6368edb1 100644 +--- a/src/northbridge/intel/haswell/native_raminit/ddr3.c ++++ b/src/northbridge/intel/haswell/native_raminit/ddr3.c +@@ -2,6 +2,7 @@ + + #include + #include ++#include + #include + #include + +@@ -215,3 +216,43 @@ enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl) + ddr3_program_mr0(ctrl, 1); + return reut_issue_zq(ctrl, ctrl->chanmap, ZQ_INIT); + } ++ ++enum raminit_status exit_selfrefresh(struct sysinfo *ctrl) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* Fields in ctrl aren't populated on a warm boot */ ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = mchbar_read32(DQ_CONTROL_0(channel, 0)), ++ }; ++ data_control_0.read_rf_rd = 1; ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ data_control_0.read_rf_rank = rank; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ } ++ } ++ ++ /* Time needed to stabilize the DCLK (~6 us) */ ++ udelay(6); ++ ++ /* Pull the DIMMs out of self refresh by asserting CKE high */ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ const union reut_misc_cke_ctrl_reg reut_misc_cke_ctrl = { ++ .cke_on = ctrl->rankmap[channel], ++ }; ++ mchbar_write32(REUT_ch_MISC_CKE_CTRL(channel), reut_misc_cke_ctrl.raw); ++ } ++ mchbar_write32(REUT_MISC_ODT_CTRL, 0); ++ ++ const enum raminit_status status = reut_issue_zq(ctrl, ctrl->chanmap, ZQ_LONG); ++ if (status) { ++ /* ZQCL errors don't seem to be a fatal problem here */ ++ printk(BIOS_ERR, "ZQ Long failed during S3 resume or warm reset flow\n"); ++ } ++ return RAMINIT_STATUS_SUCCESS; ++} +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 3a65fb01fb..056dde1adc 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -64,6 +64,22 @@ static const struct task_entry cold_boot[] = { + { train_read_mpr, true, "RDMPRT", }, + { train_jedec_write_leveling, true, "JWRL", }, + { activate_mc, true, "ACTIVATE", }, ++ { save_training_values, true, "SAVE_TRAIN", }, ++ { save_non_training, true, "SAVE_NONT", }, ++ { raminit_done, true, "RAMINITEND", }, ++}; ++ ++static const struct task_entry fast_boot[] = { ++ { collect_spd_info, true, "PROCSPD", }, ++ { restore_non_training, true, "RST_NONT", }, ++ { initialise_mpll, true, "INITMPLL", }, ++ { configure_mc, true, "CONFMC", }, ++ { configure_memory_map, true, "MEMMAP", }, ++ { do_jedec_init, true, "JEDECINIT", }, ++ { pre_training, true, "PRETRAIN", }, ++ { restore_training_values, true, "RST_TRAIN", }, ++ { exit_selfrefresh, true, "EXIT_SR", }, ++ { normal_state, true, "NORMALMODE", }, + { raminit_done, true, "RAMINITEND", }, + }; + +@@ -102,11 +118,11 @@ static void initialize_ctrl(struct sysinfo *ctrl) + ctrl->bootmode = bootmode; + } + +-static enum raminit_status try_raminit(struct sysinfo *ctrl) ++static enum raminit_status try_raminit( ++ struct sysinfo *ctrl, ++ const struct task_entry *const schedule, ++ const size_t length) + { +- const struct task_entry *const schedule = cold_boot; +- const size_t length = ARRAY_SIZE(cold_boot); +- + enum raminit_status status = RAMINIT_STATUS_UNSPECIFIED_ERROR; + + for (size_t i = 0; i < length; i++) { +@@ -140,8 +156,16 @@ void raminit_main(const enum raminit_boot_mode bootmode) + mighty_ctrl.bootmode = bootmode; + initialize_ctrl(&mighty_ctrl); + ++ enum raminit_status status = RAMINIT_STATUS_UNSPECIFIED_ERROR; ++ ++ if (bootmode != BOOTMODE_COLD) { ++ status = try_raminit(&mighty_ctrl, fast_boot, ARRAY_SIZE(fast_boot)); ++ if (status == RAMINIT_STATUS_SUCCESS) ++ return; ++ } ++ + /** TODO: Try more than once **/ +- enum raminit_status status = try_raminit(&mighty_ctrl); ++ status = try_raminit(&mighty_ctrl, cold_boot, ARRAY_SIZE(cold_boot)); + + if (status != RAMINIT_STATUS_SUCCESS) + die("Memory initialization was met with utmost failure and misery\n"); +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c +index 5f7ceec222..3ad8ce29e7 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c +@@ -54,23 +54,17 @@ static bool early_init_native(enum raminit_boot_mode bootmode) + return cpu_replaced; + } + +-#define MRC_CACHE_VERSION 1 +- +-struct mrc_data { +- const void *buffer; +- size_t buffer_len; +-}; +- +-static void save_mrc_data(struct mrc_data *md) ++static void save_mrc_data(void) + { +- mrc_cache_stash_data(MRC_TRAINING_DATA, MRC_CACHE_VERSION, md->buffer, md->buffer_len); ++ mrc_cache_stash_data(MRC_TRAINING_DATA, reg_frame_rev(), ++ reg_frame_ptr(), reg_frame_size()); + } + + static struct mrc_data prepare_mrc_cache(void) + { + struct mrc_data md = {0}; + md.buffer = mrc_cache_current_mmap_leak(MRC_TRAINING_DATA, +- MRC_CACHE_VERSION, ++ reg_frame_rev(), + &md.buffer_len); + return md; + } +@@ -94,14 +88,15 @@ static void raminit_reset(void) + } + + static enum raminit_boot_mode do_actual_raminit( +- struct mrc_data *md, + const bool s3resume, + const bool cpu_replaced, + const enum raminit_boot_mode orig_bootmode) + { ++ struct mrc_data md = prepare_mrc_cache(); ++ + enum raminit_boot_mode bootmode = orig_bootmode; + +- bool save_data_valid = md->buffer && md->buffer_len == USHRT_MAX; /** TODO: sizeof() **/ ++ bool save_data_valid = md.buffer && md.buffer_len == reg_frame_size(); + + if (s3resume) { + if (bootmode == BOOTMODE_COLD) { +@@ -154,7 +149,7 @@ static enum raminit_boot_mode do_actual_raminit( + assert(save_data_valid != (bootmode == BOOTMODE_COLD)); + if (save_data_valid) { + printk(BIOS_INFO, "Using cached memory parameters\n"); +- die("RAMINIT: Fast boot is not yet implemented\n"); ++ memcpy(reg_frame_ptr(), md.buffer, reg_frame_size()); + } + printk(RAM_DEBUG, "Initial bootmode: %s\n", bm_names[orig_bootmode]); + printk(RAM_DEBUG, "Current bootmode: %s\n", bm_names[bootmode]); +@@ -181,10 +176,8 @@ void perform_raminit(const int s3resume) + wait_txt_clear(); + wrmsr(0x2e6, (msr_t) {.lo = 0, .hi = 0}); + +- struct mrc_data md = prepare_mrc_cache(); +- + const enum raminit_boot_mode bootmode = +- do_actual_raminit(&md, s3resume, cpu_replaced, orig_bootmode); ++ do_actual_raminit(s3resume, cpu_replaced, orig_bootmode); + + /** TODO: report_memory_config **/ + +@@ -212,9 +205,8 @@ void perform_raminit(const int s3resume) + } + + /* Save training data on non-S3 resumes */ +- /** TODO: Enable this once training data is populated **/ +- if (0 && !s3resume) +- save_mrc_data(&md); ++ if (!s3resume) ++ save_mrc_data(); + + /** TODO: setup_sdram_meminfo **/ + } +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index a0a913f926..2ac16eaad3 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -170,6 +170,8 @@ enum regfile_mode { + REG_FILE_USE_CURRENT, /* Used when changing parameters after the test */ + }; + ++struct register_save_frame; ++ + struct wdb_pat { + uint32_t start_ptr; /* Starting pointer in WDB */ + uint32_t stop_ptr; /* Stopping pointer in WDB */ +@@ -220,6 +222,7 @@ enum raminit_status { + RAMINIT_STATUS_RCVEN_FAILURE, + RAMINIT_STATUS_RMPR_FAILURE, + RAMINIT_STATUS_JWRL_FAILURE, ++ RAMINIT_STATUS_INVALID_CACHE, + RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ + }; + +@@ -229,6 +232,11 @@ enum generic_stepping { + STEPPING_C0 = 3, + }; + ++struct mrc_data { ++ const void *buffer; ++ size_t buffer_len; ++}; ++ + struct raminit_dimm_info { + spd_ddr3_raw_data raw_spd; + struct dimm_attr_ddr3_st data; +@@ -448,12 +456,22 @@ enum raminit_status do_jedec_init(struct sysinfo *ctrl); + enum raminit_status train_receive_enable(struct sysinfo *ctrl); + enum raminit_status train_read_mpr(struct sysinfo *ctrl); + enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); ++enum raminit_status save_training_values(struct sysinfo *ctrl); ++enum raminit_status restore_training_values(struct sysinfo *ctrl); ++enum raminit_status save_non_training(struct sysinfo *ctrl); ++enum raminit_status restore_non_training(struct sysinfo *ctrl); ++enum raminit_status exit_selfrefresh(struct sysinfo *ctrl); ++enum raminit_status normal_state(struct sysinfo *ctrl); + enum raminit_status activate_mc(struct sysinfo *ctrl); + enum raminit_status raminit_done(struct sysinfo *ctrl); + + void configure_timings(struct sysinfo *ctrl); + void configure_refresh(struct sysinfo *ctrl); + ++struct register_save_frame *reg_frame_ptr(void); ++size_t reg_frame_size(void); ++uint32_t reg_frame_rev(void); ++ + uint32_t get_tCKE(uint32_t mem_clock_mhz, bool lpddr); + uint32_t get_tXPDLL(uint32_t mem_clock_mhz); + uint32_t get_tAONPD(uint32_t mem_clock_mhz); +diff --git a/src/northbridge/intel/haswell/native_raminit/save_restore.c b/src/northbridge/intel/haswell/native_raminit/save_restore.c +new file mode 100644 +index 0000000000..f1f50e3ff8 +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/save_restore.c +@@ -0,0 +1,387 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++uint32_t reg_frame_rev(void) ++{ ++ /* ++ * Equivalent to MRC_CACHE_REVISION, but hidden via abstraction. ++ * The structures that get saved to flash are contained within ++ * this translation unit, so changes outside this file shouldn't ++ * require invalidating the cache. ++ */ ++ return 1; ++} ++ ++struct register_save { ++ uint16_t lower; ++ uint16_t upper; ++}; ++ ++/** TODO: Haswell DDRIO aliases writes: 0x80 .. 0xff => 0x00 .. 0x7f **/ ++static const struct register_save ddrio_per_byte_list[] = { ++ {0x0000, 0x003c}, /* 16 registers */ ++// {0x0048, 0x0084}, /* 16 registers */ /** TODO: BDW support **/ ++ {0x0048, 0x004c}, /* 2 registers */ ++ {0x005c, 0x0078}, /* 8 registers */ ++}; ++#define DDRIO_PER_BYTE_REGISTER_COUNT (16 + 2 + 8) ++ ++static const struct register_save ddrio_per_ch_list[] = { ++ /* CKE */ ++ {0x1204, 0x1208}, /* 2 registers */ ++ {0x1214, 0x121c}, /* 3 registers */ ++ /* CMD North */ ++ {0x1404, 0x140c}, /* 3 registers */ ++ /* CLK */ ++ {0x1808, 0x1810}, /* 3 registers */ ++ /* CMD South */ ++ {0x1a04, 0x1a0c}, /* 3 registers */ ++ /* CTL */ ++ {0x1c14, 0x1c1c}, /* 3 registers */ ++}; ++#define DDRIO_PER_CH_REGISTER_COUNT (2 + 3 * 5) ++ ++static const struct register_save ddrio_common_list[] = { ++ {0x2000, 0x2008}, /* 3 registers */ ++ {0x3a14, 0x3a1c}, /* 3 registers */ ++ {0x3a24, 0x3a24}, /* 1 registers */ ++}; ++ ++#define DDRIO_COMMON_REGISTER_COUNT (3 + 3 + 1) ++ ++static const struct register_save mcmain_per_ch_list[] = { ++ {0x4000, 0x4014}, /* 6 registers */ ++ {0x4024, 0x4028}, /* 2 registers */ ++ {0x40d0, 0x40d0}, /* 1 registers */ ++ {0x4220, 0x4224}, /* 2 registers */ ++ {0x4294, 0x4294}, /* 1 registers */ ++ {0x429c, 0x42a0}, /* 2 registers */ ++ {0x42ec, 0x42fc}, /* 5 registers */ ++ {0x4328, 0x4328}, /* 1 registers */ ++ {0x438c, 0x4390}, /* 2 registers */ ++}; ++#define MCMAIN_PER_CH_REGISTER_COUNT (6 + 2 + 1 + 2 + 1 + 2 + 5 + 1 + 2) ++ ++static const struct register_save misc_common_list[] = { ++ {0x5884, 0x5888}, /* 2 registers */ ++ {0x5890, 0x589c}, /* 4 registers */ ++ {0x58a4, 0x58a4}, /* 1 registers */ ++ {0x58d0, 0x58e4}, /* 6 registers */ ++ {0x5880, 0x5880}, /* 1 registers */ ++ {0x5000, 0x50dc}, /* 56 registers */ ++ {0x59b8, 0x59b8} /* 1 registers */ ++}; ++#define MISC_COMMON_REGISTER_COUNT (2 + 4 + 1 + 6 + 1 + 56 + 1) ++ ++struct save_params { ++ bool is_initialised; ++ ++ /* Memory base frequency, either 100 or 133 MHz */ ++ uint8_t base_freq; ++ ++ /* Multiplier */ ++ uint32_t multiplier; ++ ++ /* Memory clock in MHz */ ++ uint32_t mem_clock_mhz; ++ ++ /* Memory clock in femtoseconds */ ++ uint32_t mem_clock_fs; ++ ++ /* Quadrature clock in picoseconds */ ++ uint16_t qclkps; ++ ++ /* Bitfield of supported CAS latencies */ ++ uint16_t cas_supported; ++ ++ /* CPUID value */ ++ uint32_t cpu; ++ ++ /* Cached CPU stepping value */ ++ uint8_t stepping; ++ ++ uint16_t vdd_mv; ++ ++ union dimm_flags_ddr3_st flags; ++ ++ /* Except for tCK, everything is stored in DCLKs */ ++ uint32_t tCK; ++ uint32_t tAA; ++ uint32_t tWR; ++ uint32_t tRCD; ++ uint32_t tRRD; ++ uint32_t tRP; ++ uint32_t tRAS; ++ uint32_t tRC; ++ uint32_t tRFC; ++ uint32_t tWTR; ++ uint32_t tRTP; ++ uint32_t tFAW; ++ uint32_t tCWL; ++ uint32_t tCMD; ++ ++ uint32_t tREFI; ++ uint32_t tXP; ++ ++ uint8_t lpddr_cke_rank_map[NUM_CHANNELS]; ++ ++ struct raminit_dimm_info dimms[NUM_CHANNELS][NUM_SLOTS]; ++ ++ uint8_t chanmap; ++ ++ uint32_t channel_size_mb[NUM_CHANNELS]; ++ ++ /* DIMMs per channel */ ++ uint8_t dpc[NUM_CHANNELS]; ++ ++ uint8_t rankmap[NUM_CHANNELS]; ++ ++ /* Whether a rank is mirrored or not (only rank 1 of each DIMM can be) */ ++ uint8_t rank_mirrored[NUM_CHANNELS]; ++ ++ /* ++ * FIXME: LPDDR support is incomplete. The largest chunks are missing, ++ * but some LPDDR-specific variations in algorithms have been handled. ++ * LPDDR-specific functions have stubs which will halt upon execution. ++ */ ++ bool lpddr; ++ ++ uint8_t lanes; ++ ++ /* FIXME: ECC support missing */ ++ bool is_ecc; ++}; ++ ++struct register_save_frame { ++ uint32_t ddrio_per_byte[NUM_CHANNELS][NUM_LANES][DDRIO_PER_BYTE_REGISTER_COUNT]; ++ uint32_t ddrio_per_ch[NUM_CHANNELS][DDRIO_PER_CH_REGISTER_COUNT]; ++ uint32_t ddrio_common[DDRIO_COMMON_REGISTER_COUNT]; ++ uint32_t mcmain_per_ch[NUM_CHANNELS][MCMAIN_PER_CH_REGISTER_COUNT]; ++ uint32_t misc_common[MISC_COMMON_REGISTER_COUNT]; ++ struct save_params params; ++}; ++ ++struct register_save_frame *reg_frame_ptr(void) ++{ ++ /* The chonky register save frame struct, used for fast boot and S3 resume */ ++ static struct register_save_frame register_frame = { 0 }; ++ return ®ister_frame; ++} ++ ++size_t reg_frame_size(void) ++{ ++ return sizeof(struct register_save_frame); ++} ++ ++typedef void (*reg_func_t)(const uint16_t offset, uint32_t *const value); ++ ++static void save_value(const uint16_t offset, uint32_t *const value) ++{ ++ *value = mchbar_read32(offset); ++} ++ ++static void restore_value(const uint16_t offset, uint32_t *const value) ++{ ++ mchbar_write32(offset, *value); ++} ++ ++static void save_restore( ++ uint32_t *reg_frame, ++ const uint16_t g_offset, ++ const struct register_save *reg_save_list, ++ const size_t reg_save_length, ++ reg_func_t handle_reg) ++{ ++ for (size_t i = 0; i < reg_save_length; i++) { ++ const struct register_save *entry = ®_save_list[i]; ++ for (uint16_t offset = entry->lower; offset <= entry->upper; offset += 4) { ++ handle_reg(offset + g_offset, reg_frame++); ++ } ++ } ++} ++ ++static void save_restore_all(struct register_save_frame *reg_frame, reg_func_t handle_reg) ++{ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ for (uint8_t byte = 0; byte < NUM_LANES; byte++) { ++ const uint16_t g_offset = _DDRIO_C_R_B(0, channel, 0, byte); ++ save_restore( ++ reg_frame->ddrio_per_byte[channel][byte], ++ g_offset, ++ ddrio_per_byte_list, ++ ARRAY_SIZE(ddrio_per_byte_list), ++ handle_reg); ++ } ++ } ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ const uint16_t g_offset = _DDRIO_C_R_B(0, channel, 0, 0); ++ save_restore( ++ reg_frame->ddrio_per_ch[channel], ++ g_offset, ++ ddrio_per_ch_list, ++ ARRAY_SIZE(ddrio_per_ch_list), ++ handle_reg); ++ } ++ save_restore( ++ reg_frame->ddrio_common, ++ 0, ++ ddrio_common_list, ++ ARRAY_SIZE(ddrio_common_list), ++ handle_reg); ++ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ const uint16_t g_offset = _MCMAIN_C(0, channel); ++ save_restore( ++ reg_frame->mcmain_per_ch[channel], ++ g_offset, ++ mcmain_per_ch_list, ++ ARRAY_SIZE(mcmain_per_ch_list), ++ handle_reg); ++ } ++ save_restore( ++ reg_frame->misc_common, ++ 0, ++ misc_common_list, ++ ARRAY_SIZE(misc_common_list), ++ handle_reg); ++} ++ ++enum raminit_status save_training_values(struct sysinfo *ctrl) ++{ ++ save_restore_all(reg_frame_ptr(), save_value); ++ return RAMINIT_STATUS_SUCCESS; ++} ++ ++enum raminit_status restore_training_values(struct sysinfo *ctrl) ++{ ++ save_restore_all(reg_frame_ptr(), restore_value); ++ return RAMINIT_STATUS_SUCCESS; ++} ++ ++enum raminit_status save_non_training(struct sysinfo *ctrl) ++{ ++ struct register_save_frame *reg_frame = reg_frame_ptr(); ++ struct save_params *params = ®_frame->params; ++ ++ params->is_initialised = true; ++ ++ params->base_freq = ctrl->base_freq; ++ params->multiplier = ctrl->multiplier; ++ params->mem_clock_mhz = ctrl->mem_clock_mhz; ++ params->mem_clock_fs = ctrl->mem_clock_fs; ++ params->qclkps = ctrl->qclkps; ++ params->cas_supported = ctrl->cas_supported; ++ params->cpu = ctrl->cpu; ++ params->stepping = ctrl->stepping; ++ params->vdd_mv = ctrl->vdd_mv; ++ params->flags = ctrl->flags; ++ ++ params->tCK = ctrl->tCK; ++ params->tAA = ctrl->tAA; ++ params->tWR = ctrl->tWR; ++ params->tRCD = ctrl->tRCD; ++ params->tRRD = ctrl->tRRD; ++ params->tRP = ctrl->tRP; ++ params->tRAS = ctrl->tRAS; ++ params->tRC = ctrl->tRC; ++ params->tRFC = ctrl->tRFC; ++ params->tWTR = ctrl->tWTR; ++ params->tRTP = ctrl->tRTP; ++ params->tFAW = ctrl->tFAW; ++ params->tCWL = ctrl->tCWL; ++ params->tCMD = ctrl->tCMD; ++ params->tREFI = ctrl->tREFI; ++ params->tXP = ctrl->tXP; ++ ++ params->chanmap = ctrl->chanmap; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ params->lpddr_cke_rank_map[channel] = ctrl->lpddr_cke_rank_map[channel]; ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) ++ params->dimms[channel][slot] = ctrl->dimms[channel][slot]; ++ } ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ params->dpc[channel] = ctrl->dpc[channel]; ++ params->rankmap[channel] = ctrl->rankmap[channel]; ++ params->rank_mirrored[channel] = ctrl->rank_mirrored[channel]; ++ params->channel_size_mb[channel] = ctrl->channel_size_mb[channel]; ++ } ++ params->lpddr = ctrl->lpddr; ++ params->lanes = ctrl->lanes; ++ params->is_ecc = ctrl->is_ecc; ++ return RAMINIT_STATUS_SUCCESS; ++} ++ ++#define RAMINIT_COMPARE(_s1, _s2) \ ++ ((sizeof(_s1) == sizeof(_s2)) && !memcmp(_s1, _s2, sizeof(_s1))) ++ ++enum raminit_status restore_non_training(struct sysinfo *ctrl) ++{ ++ struct register_save_frame *reg_frame = reg_frame_ptr(); ++ struct save_params *params = ®_frame->params; ++ ++ if (!params->is_initialised) { ++ printk(BIOS_WARNING, "Cannot fast boot: saved data is invalid\n"); ++ return RAMINIT_STATUS_INVALID_CACHE; ++ } ++ ++ if (!RAMINIT_COMPARE(ctrl->dimms, params->dimms)) { ++ printk(BIOS_WARNING, "Cannot fast boot: DIMMs have changed\n"); ++ return RAMINIT_STATUS_INVALID_CACHE; ++ } ++ ++ if (ctrl->cpu != params->cpu) { ++ printk(BIOS_WARNING, "Cannot fast boot: CPU has changed\n"); ++ return RAMINIT_STATUS_INVALID_CACHE; ++ } ++ ++ ctrl->base_freq = params->base_freq; ++ ctrl->multiplier = params->multiplier; ++ ctrl->mem_clock_mhz = params->mem_clock_mhz; ++ ctrl->mem_clock_fs = params->mem_clock_fs; ++ ctrl->qclkps = params->qclkps; ++ ctrl->cas_supported = params->cas_supported; ++ ctrl->cpu = params->cpu; ++ ctrl->stepping = params->stepping; ++ ctrl->vdd_mv = params->vdd_mv; ++ ctrl->flags = params->flags; ++ ++ ctrl->tCK = params->tCK; ++ ctrl->tAA = params->tAA; ++ ctrl->tWR = params->tWR; ++ ctrl->tRCD = params->tRCD; ++ ctrl->tRRD = params->tRRD; ++ ctrl->tRP = params->tRP; ++ ctrl->tRAS = params->tRAS; ++ ctrl->tRC = params->tRC; ++ ctrl->tRFC = params->tRFC; ++ ctrl->tWTR = params->tWTR; ++ ctrl->tRTP = params->tRTP; ++ ctrl->tFAW = params->tFAW; ++ ctrl->tCWL = params->tCWL; ++ ctrl->tCMD = params->tCMD; ++ ctrl->tREFI = params->tREFI; ++ ctrl->tXP = params->tXP; ++ ++ ctrl->chanmap = params->chanmap; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ ctrl->lpddr_cke_rank_map[channel] = params->lpddr_cke_rank_map[channel]; ++ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) ++ ctrl->dimms[channel][slot] = params->dimms[channel][slot]; ++ } ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ ctrl->dpc[channel] = params->dpc[channel]; ++ ctrl->rankmap[channel] = params->rankmap[channel]; ++ ctrl->rank_mirrored[channel] = params->rank_mirrored[channel]; ++ ctrl->channel_size_mb[channel] = params->channel_size_mb[channel]; ++ } ++ ctrl->lpddr = params->lpddr; ++ ctrl->lanes = params->lanes; ++ ctrl->is_ecc = params->is_ecc; ++ return RAMINIT_STATUS_SUCCESS; ++} +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0045-haswell-NRI-Configure-initial-MC-settings.patch b/config/coreboot/default/patches/0045-haswell-NRI-Configure-initial-MC-settings.patch deleted file mode 100644 index eefd17a9..00000000 --- a/config/coreboot/default/patches/0045-haswell-NRI-Configure-initial-MC-settings.patch +++ /dev/null @@ -1,1594 +0,0 @@ -From e91b308fe5848b14cabbd29be4af60e3a9b7938d Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sat, 7 May 2022 17:22:07 +0200 -Subject: [PATCH 45/65] haswell NRI: Configure initial MC settings - -Program initial memory controller settings. Many of these values will be -adjusted later during training. - -Change-Id: If33846b51cb1bab5d0458fe626e13afb1bdc900e -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 2 + - .../haswell/native_raminit/configure_mc.c | 822 ++++++++++++++++++ - .../haswell/native_raminit/raminit_main.c | 2 + - .../haswell/native_raminit/raminit_native.h | 101 +++ - .../haswell/native_raminit/reg_structs.h | 405 +++++++++ - .../haswell/native_raminit/timings_refresh.c | 13 + - .../intel/haswell/registers/mchbar.h | 94 ++ - 7 files changed, 1439 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/configure_mc.c - create mode 100644 src/northbridge/intel/haswell/native_raminit/reg_structs.h - create mode 100644 src/northbridge/intel/haswell/native_raminit/timings_refresh.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index 2769e0bbb4..fc55277a65 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -1,8 +1,10 @@ - ## SPDX-License-Identifier: GPL-2.0-or-later - -+romstage-y += configure_mc.c - romstage-y += lookup_timings.c - romstage-y += init_mpll.c - romstage-y += io_comp_control.c - romstage-y += raminit_main.c - romstage-y += raminit_native.c - romstage-y += spd_bitmunching.c -+romstage-y += timings_refresh.c -diff --git a/src/northbridge/intel/haswell/native_raminit/configure_mc.c b/src/northbridge/intel/haswell/native_raminit/configure_mc.c -new file mode 100644 -index 0000000000..88249725a7 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/configure_mc.c -@@ -0,0 +1,822 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+static void program_misc_control(struct sysinfo *ctrl) -+{ -+ if (!is_hsw_ult()) -+ return; -+ -+ const union ddr_scram_misc_control_reg ddr_scram_misc_ctrl = { -+ .ddr_no_ch_interleave = !ctrl->dq_pins_interleaved, -+ .lpddr_mode = ctrl->lpddr, -+ .cke_mapping_ch0 = ctrl->lpddr ? ctrl->lpddr_cke_rank_map[0] : 0, -+ .cke_mapping_ch1 = ctrl->lpddr ? ctrl->lpddr_cke_rank_map[1] : 0, -+ }; -+ mchbar_write32(DDR_SCRAM_MISC_CONTROL, ddr_scram_misc_ctrl.raw); -+} -+ -+static void program_mrc_revision(void) -+{ -+ mchbar_write32(MRC_REVISION, 0x01090000); /* MRC 1.9.0 Build 0 */ -+} -+ -+static void program_ranks_used(struct sysinfo *ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ mchbar_write8(MC_INIT_STATE_ch(channel), ctrl->rankmap[channel]); -+ if (!does_ch_exist(ctrl, channel)) { -+ mchbar_write32(DDR_CLK_ch_RANKS_USED(channel), 0); -+ mchbar_write32(DDR_CTL_ch_CTL_RANKS_USED(channel), 0); -+ mchbar_write32(DDR_CKE_ch_CTL_RANKS_USED(channel), 0); -+ continue; -+ } -+ uint32_t clk_ranks_used = ctrl->rankmap[channel]; -+ if (ctrl->lpddr) { -+ /* With LPDDR, the clock usage goes by group instead */ -+ clk_ranks_used = 0; -+ for (uint8_t group = 0; group < NUM_GROUPS; group++) { -+ if (ctrl->dq_byte_map[channel][CT_ITERATION_CLOCK][group]) -+ clk_ranks_used |= BIT(group); -+ } -+ } -+ mchbar_write32(DDR_CLK_ch_RANKS_USED(channel), clk_ranks_used); -+ -+ uint32_t ctl_ranks_used = ctrl->rankmap[channel]; -+ if (is_hsw_ult()) { -+ /* Set ODT disable bits */ -+ /** TODO: May need to do this after JEDEC reset/init **/ -+ if (ctrl->lpddr && ctrl->lpddr_dram_odt) -+ ctl_ranks_used |= 2 << 4; /* ODT is used on rank 0 */ -+ else -+ ctl_ranks_used |= 3 << 4; -+ } -+ mchbar_write32(DDR_CTL_ch_CTL_RANKS_USED(channel), ctl_ranks_used); -+ -+ uint32_t cke_ranks_used = ctrl->rankmap[channel]; -+ if (ctrl->lpddr) { -+ /* Use CKE-to-rank mapping for LPDDR */ -+ const uint8_t cke_rank_map = ctrl->lpddr_cke_rank_map[channel]; -+ cke_ranks_used = 0; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ /* ULT only has 2 ranks per channel */ -+ if (rank >= 2) -+ break; -+ -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t cke = 0; cke < 4; cke++) { -+ if (rank == ((cke_rank_map >> cke) & 1)) -+ cke_ranks_used |= BIT(cke); -+ } -+ } -+ } -+ mchbar_write32(DDR_CKE_ch_CTL_RANKS_USED(channel), cke_ranks_used); -+ } -+} -+ -+static const uint8_t rxb_trad[2][5][4] = { -+ { /* Vdd low */ -+ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, 1867 MT/s, 2133 MT/s, */ -+ {4, 3, 3, 2}, {4, 4, 3, 2}, {5, 4, 3, 3}, {5, 4, 4, 3}, {5, 4, 4, 3}, -+ }, -+ { /* Vdd hi */ -+ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, 1867 MT/s, 2133 MT/s, */ -+ {4, 3, 3, 2}, {4, 4, 3, 2}, {5, 4, 3, 3}, {5, 4, 4, 3}, {4, 4, 3, 3}, -+ }, -+}; -+ -+static const uint8_t rxb_ultx[2][3][4] = { -+ { /* Vdd low */ -+ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, */ -+ {5, 6, 6, 5}, {5, 6, 6, 5}, {4, 6, 6, 6}, -+ }, -+ { /* Vdd hi */ -+ /* 1067 MT/s, 1333 MT/s, 1600 MT/s, */ -+ {7, 6, 6, 5}, {7, 6, 6, 5}, {7, 6, 6, 6}, -+ }, -+}; -+ -+uint8_t get_rx_bias(const struct sysinfo *ctrl) -+{ -+ const bool is_ult = is_hsw_ult(); -+ const bool vddhi = ctrl->vdd_mv > 1350; -+ const uint8_t max_rxf = is_ult ? ARRAY_SIZE(rxb_ultx[0]) : ARRAY_SIZE(rxb_trad[0]); -+ const uint8_t ref_clk = ctrl->base_freq == 133 ? 4 : 6; -+ const uint8_t rx_f = clamp_s8(0, ctrl->multiplier - ref_clk, max_rxf - 1); -+ const uint8_t rx_cb = mchbar_read32(DDR_CLK_CB_STATUS) & 0x3; -+ if (is_ult) -+ return rxb_ultx[vddhi][rx_f][rx_cb]; -+ else -+ return rxb_trad[vddhi][rx_f][rx_cb]; -+} -+ -+static void program_ddr_data(struct sysinfo *ctrl, const bool dis_odt_static, const bool vddhi) -+{ -+ const bool is_ult = is_hsw_ult(); -+ -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!does_rank_exist(ctrl, rank)) -+ continue; -+ -+ const union ddr_data_rx_train_rank_reg rx_train = { -+ .rcven = 64, -+ .dqs_p = 32, -+ .dqs_n = 32, -+ }; -+ mchbar_write32(DDR_DATA_RX_TRAIN_RANK(rank), rx_train.raw); -+ mchbar_write32(DDR_DATA_RX_PER_BIT_RANK(rank), 0x88888888); -+ -+ const union ddr_data_tx_train_rank_reg tx_train = { -+ .tx_eq = TXEQFULLDRV | 11, -+ .dq_delay = 96, -+ .dqs_delay = 64, -+ }; -+ mchbar_write32(DDR_DATA_TX_TRAIN_RANK(rank), tx_train.raw); -+ mchbar_write32(DDR_DATA_TX_PER_BIT_RANK(rank), 0x88888888); -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ ctrl->tx_dq[channel][rank][byte] = tx_train.dq_delay; -+ ctrl->txdqs[channel][rank][byte] = tx_train.dqs_delay; -+ ctrl->tx_eq[channel][rank][byte] = tx_train.tx_eq; -+ -+ ctrl->rcven[channel][rank][byte] = rx_train.rcven; -+ ctrl->rxdqsp[channel][rank][byte] = rx_train.dqs_p; -+ ctrl->rxdqsn[channel][rank][byte] = rx_train.dqs_n; -+ ctrl->rx_eq[channel][rank][byte] = rx_train.rx_eq; -+ } -+ } -+ } -+ mchbar_write32(DDR_DATA_TX_XTALK, 0); -+ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0x88888888); -+ mchbar_write32(DDR_DATA_OFFSET_TRAIN, 0); -+ mchbar_write32(DDR_DATA_OFFSET_COMP, 0); -+ -+ const union ddr_data_control_0_reg data_control_0 = { -+ .internal_clocks_on = !is_ult, -+ .data_vccddq_hi = vddhi, -+ .disable_odt_static = dis_odt_static, -+ .lpddr_mode = ctrl->lpddr, -+ .odt_samp_extend_en = ctrl->lpddr, -+ .early_rleak_en = ctrl->lpddr && ctrl->stepping >= STEPPING_C0, -+ }; -+ mchbar_write32(DDR_DATA_CONTROL_0, data_control_0.raw); -+ -+ const union ddr_data_control_1_reg data_control_1 = { -+ .dll_mask = 1, -+ .rx_bias_ctl = get_rx_bias(ctrl), -+ .odt_delay = -2, -+ .odt_duration = 7, -+ .sense_amp_delay = -2, -+ .sense_amp_duration = 7, -+ }; -+ mchbar_write32(DDR_DATA_CONTROL_1, data_control_1.raw); -+ -+ clear_data_offset_train_all(ctrl); -+ -+ /* Stagger byte turn-on to reduce dI/dT */ -+ const uint8_t byte_stagger[] = { 0, 4, 1, 5, 2, 6, 3, 7, 8 }; -+ const uint8_t latency = 2 * ctrl->tAA - 6; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ union ddr_data_control_2_reg data_control_2 = { -+ .raw = 0, -+ }; -+ if (is_ult) { -+ data_control_2.rx_dqs_amp_offset = 8; -+ data_control_2.rx_clk_stg_num = 0x1f; -+ data_control_2.leaker_comp = ctrl->lpddr ? 3 : 0; -+ } -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const uint8_t stg = latency * byte_stagger[byte] / ctrl->lanes; -+ data_control_2.rx_stagger_ctl = stg & 0x1f; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); -+ ctrl->data_offset_comp[channel][byte] = 0; -+ ctrl->dq_control_1[channel][byte] = data_control_1.raw; -+ ctrl->dq_control_2[channel][byte] = data_control_2.raw; -+ } -+ ctrl->dq_control_0[channel] = data_control_0.raw; -+ } -+} -+ -+static void program_vsshi_control(struct sysinfo *ctrl, const uint16_t vsshi_mv) -+{ -+ const uint32_t vsshi_control_reg = is_hsw_ult() ? 0x366c : 0x306c; -+ const union ddr_comp_vsshi_control_reg ddr_vsshi_control = { -+ .vsshi_target = (vsshi_mv * 192) / ctrl->vdd_mv - 20, -+ .hi_bw_divider = 1, -+ .lo_bw_divider = 1, -+ .bw_error = 2, -+ .panic_driver_en = 1, -+ .panic_voltage = 24 / 8, /* Voltage in 8mV steps */ -+ .gain_boost = 1, -+ }; -+ mchbar_write32(vsshi_control_reg, ddr_vsshi_control.raw); -+ mchbar_write32(DDR_COMP_VSSHI_CONTROL, ddr_vsshi_control.raw); -+} -+ -+static void calc_vt_slope_code(const uint16_t slope, uint8_t *best_a, uint8_t *best_b) -+{ -+ const int16_t coding[] = {0, -125, -62, -31, 250, 125, 62, 31}; -+ *best_a = 0; -+ *best_b = 0; -+ int16_t best_err = slope; -+ for (uint8_t b = 0; b < ARRAY_SIZE(coding); b++) { -+ for (uint8_t a = b; a < ARRAY_SIZE(coding); a++) { -+ int16_t error = slope - (coding[a] + coding[b]); -+ if (error < 0) -+ error = -error; -+ -+ if (error < best_err) { -+ best_err = error; -+ *best_a = a; -+ *best_b = b; -+ } -+ } -+ } -+} -+ -+static void program_dimm_vref(struct sysinfo *ctrl, const uint16_t vccio_mv, const bool vddhi) -+{ -+ const bool is_ult = is_hsw_ult(); -+ -+ /* Static values for ULT */ -+ uint8_t vt_slope_a = 4; -+ uint8_t vt_slope_b = 0; -+ if (!is_ult) { -+ /* On non-ULT, compute best slope code */ -+ const uint16_t vt_slope = 1500 * vccio_mv / ctrl->vdd_mv - 1000; -+ calc_vt_slope_code(vt_slope, &vt_slope_a, &vt_slope_b); -+ } -+ const union ddr_data_vref_control_reg ddr_vref_control = { -+ .hi_bw_divider = is_ult ? 0 : 3, -+ .lo_bw_divider = 3, -+ .sample_divider = is_ult ? 1 : 3, -+ .slow_bw_error = 1, -+ .hi_bw_enable = 1, -+ .vt_slope_b = vt_slope_b, -+ .vt_slope_a = vt_slope_a, -+ .vt_offset = 0, -+ }; -+ mchbar_write32(is_ult ? 0xf68 : 0xf6c, ddr_vref_control.raw); /* Use CH1 byte 7 */ -+ -+ const union ddr_data_vref_adjust_reg ddr_vref_adjust = { -+ .en_dimm_vref_ca = 1, -+ .en_dimm_vref_ch0 = 1, -+ .en_dimm_vref_ch1 = 1, -+ .vccddq_hi_qnnn_h = vddhi, -+ .hi_z_timer_ctrl = 3, -+ }; -+ ctrl->dimm_vref = ddr_vref_adjust; -+ mchbar_write32(DDR_DATA_VREF_ADJUST, ddr_vref_adjust.raw); -+} -+ -+static uint32_t pi_code(const uint32_t code) -+{ -+ return code << 21 | code << 14 | code << 7 | code << 0; -+} -+ -+static void program_ddr_ca(struct sysinfo *ctrl, const bool vddhi) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ const union ddr_clk_controls_reg ddr_clk_controls = { -+ .dll_mask = 1, -+ .vccddq_hi = vddhi, -+ .lpddr_mode = ctrl->lpddr, -+ }; -+ mchbar_write32(DDR_CLK_ch_CONTROLS(channel), ddr_clk_controls.raw); -+ -+ const union ddr_cmd_controls_reg ddr_cmd_controls = { -+ .dll_mask = 1, -+ .vccddq_hi = vddhi, -+ .lpddr_mode = ctrl->lpddr, -+ .early_weak_drive = 3, -+ .cmd_tx_eq = 1, -+ }; -+ mchbar_write32(DDR_CMD_ch_CONTROLS(channel), ddr_cmd_controls.raw); -+ -+ const union ddr_cke_ctl_controls_reg ddr_cke_controls = { -+ .dll_mask = 1, -+ .vccddq_hi = vddhi, -+ .lpddr_mode = ctrl->lpddr, -+ .early_weak_drive = 3, -+ .cmd_tx_eq = 1, -+ .ctl_tx_eq = 1, -+ .ctl_sr_drv = 2, -+ }; -+ mchbar_write32(DDR_CKE_ch_CTL_CONTROLS(channel), ddr_cke_controls.raw); -+ -+ const union ddr_cke_ctl_controls_reg ddr_ctl_controls = { -+ .dll_mask = 1, -+ .vccddq_hi = vddhi, -+ .lpddr_mode = ctrl->lpddr, -+ .ctl_tx_eq = 1, -+ .ctl_sr_drv = 2, -+ .la_drv_en_ovrd = 1, /* Must be set on ULT */ -+ }; -+ mchbar_write32(DDR_CTL_ch_CTL_CONTROLS(channel), ddr_ctl_controls.raw); -+ -+ const uint8_t cmd_pi = ctrl->lpddr ? 96 : 64; -+ mchbar_write32(DDR_CMD_ch_PI_CODING(channel), pi_code(cmd_pi)); -+ mchbar_write32(DDR_CKE_ch_CMD_PI_CODING(channel), pi_code(cmd_pi)); -+ mchbar_write32(DDR_CKE_CTL_ch_CTL_PI_CODING(channel), pi_code(64)); -+ mchbar_write32(DDR_CLK_ch_PI_CODING(channel), pi_code(64)); -+ -+ mchbar_write32(DDR_CMD_ch_COMP_OFFSET(channel), 0); -+ mchbar_write32(DDR_CLK_ch_COMP_OFFSET(channel), 0); -+ mchbar_write32(DDR_CKE_CTL_ch_CTL_COMP_OFFSET(channel), 0); -+ -+ for (uint8_t group = 0; group < NUM_GROUPS; group++) { -+ ctrl->cke_cmd_pi_code[channel][group] = cmd_pi; -+ ctrl->cmd_north_pi_code[channel][group] = cmd_pi; -+ ctrl->cmd_south_pi_code[channel][group] = cmd_pi; -+ } -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ ctrl->clk_pi_code[channel][rank] = 64; -+ ctrl->ctl_pi_code[channel][rank] = 64; -+ } -+ } -+} -+ -+enum { -+ RCOMP_RD_ODT = 0, -+ RCOMP_WR_DS_DQ, -+ RCOMP_WR_DS_CMD, -+ RCOMP_WR_DS_CTL, -+ RCOMP_WR_DS_CLK, -+ RCOMP_MAX_CODES, -+}; -+ -+struct rcomp_info { -+ uint8_t resistor; -+ uint8_t sz_steps; -+ uint8_t target_r; -+ int8_t result; -+}; -+ -+static void program_rcomp_vref(struct sysinfo *ctrl, const bool dis_odt_static) -+{ -+ const bool is_ult = is_hsw_ult(); -+ /* -+ * +-------------------------------+ -+ * | Rcomp resistor values in ohms | -+ * +-----------+------+------+-----+ -+ * | Ball name | Trad | ULTX | Use | -+ * +-----------+------+------+-----+ -+ * | SM_RCOMP0 | 100 | 200 | CMD | -+ * | SM_RCOMP1 | 75 | 120 | DQ | -+ * | SM_RCOMP2 | 100 | 100 | ODT | -+ * +-----------+------+------+-----+ -+ */ -+ struct rcomp_info rcomp_cfg[RCOMP_MAX_CODES] = { -+ [RCOMP_RD_ODT] = { -+ .resistor = 50, -+ .sz_steps = 96, -+ .target_r = 50, -+ }, -+ [RCOMP_WR_DS_DQ] = { -+ .resistor = 25, -+ .sz_steps = 64, -+ .target_r = 33, -+ }, -+ [RCOMP_WR_DS_CMD] = { -+ .resistor = 20, -+ .sz_steps = 64, -+ .target_r = 20, -+ }, -+ [RCOMP_WR_DS_CTL] = { -+ .resistor = 20, -+ .sz_steps = 64, -+ .target_r = 20, -+ }, -+ [RCOMP_WR_DS_CLK] = { -+ .resistor = 25, -+ .sz_steps = 64, -+ .target_r = 29, -+ }, -+ }; -+ if (is_ult) { -+ rcomp_cfg[RCOMP_WR_DS_DQ].resistor = 40; -+ rcomp_cfg[RCOMP_WR_DS_DQ].target_r = 40; -+ rcomp_cfg[RCOMP_WR_DS_CLK].resistor = 40; -+ } else if (ctrl->dpc[0] == 2 || ctrl->dpc[1] == 2) { -+ rcomp_cfg[RCOMP_RD_ODT].target_r = 60; -+ } -+ for (uint8_t i = 0; i < RCOMP_MAX_CODES; i++) { -+ struct rcomp_info *const r = &rcomp_cfg[i]; -+ const int32_t div = 2 * (r->resistor + r->target_r); -+ assert(div); -+ const int32_t vref = (r->sz_steps * (r->resistor - r->target_r)) / div; -+ -+ /* DqOdt is 5 bits wide, the other Rcomp targets are 4 bits wide */ -+ const int8_t comp_limit = i == RCOMP_RD_ODT ? 16 : 8; -+ r->result = clamp_s32(-comp_limit, vref, comp_limit - 1); -+ } -+ const union ddr_comp_ctl_0_reg ddr_comp_ctl_0 = { -+ .disable_odt_static = dis_odt_static, -+ .dq_drv_vref = rcomp_cfg[RCOMP_WR_DS_DQ].result, -+ .dq_odt_vref = rcomp_cfg[RCOMP_RD_ODT].result, -+ .cmd_drv_vref = rcomp_cfg[RCOMP_WR_DS_CMD].result, -+ .ctl_drv_vref = rcomp_cfg[RCOMP_WR_DS_CTL].result, -+ .clk_drv_vref = rcomp_cfg[RCOMP_WR_DS_CLK].result, -+ }; -+ ctrl->comp_ctl_0 = ddr_comp_ctl_0; -+ mchbar_write32(DDR_COMP_CTL_0, ctrl->comp_ctl_0.raw); -+} -+ -+enum { -+ SCOMP_DQ = 0, -+ SCOMP_CMD, -+ SCOMP_CTL, -+ SCOMP_CLK, -+ SCOMP_MAX_CODES, -+}; -+ -+static void program_slew_rates(struct sysinfo *ctrl, const bool vddhi) -+{ -+ const uint8_t min_cycle_delay[SCOMP_MAX_CODES] = { 46, 70, 70, 46 }; -+ uint8_t buffer_stage_delay_ps[SCOMP_MAX_CODES] = { 59, 53, 53, 53 }; -+ uint16_t comp_slew_rate_codes[SCOMP_MAX_CODES]; -+ -+ /* CMD Slew Rate = 1.8 for 2N */ -+ if (ctrl->tCMD == 2) -+ buffer_stage_delay_ps[SCOMP_CMD] = 89; -+ -+ /* CMD Slew Rate = 4 V/ns for double-pumped CMD bus */ -+ if (ctrl->lpddr) -+ buffer_stage_delay_ps[SCOMP_CMD] = 63; -+ -+ for (uint8_t i = 0; i < SCOMP_MAX_CODES; i++) { -+ uint16_t stages = DIV_ROUND_CLOSEST(ctrl->qclkps, buffer_stage_delay_ps[i]); -+ if (stages < 5) -+ stages = 5; -+ -+ bool dll_pc = buffer_stage_delay_ps[i] < min_cycle_delay[i] || stages > 16; -+ -+ /* Lock DLL... */ -+ if (dll_pc) -+ comp_slew_rate_codes[i] = stages / 2 - 1; /* to a phase */ -+ else -+ comp_slew_rate_codes[i] = (stages - 1) | BIT(4); /* to a cycle */ -+ } -+ union ddr_comp_ctl_1_reg ddr_comp_ctl_1 = { -+ .dq_scomp = comp_slew_rate_codes[SCOMP_DQ], -+ .cmd_scomp = comp_slew_rate_codes[SCOMP_CMD], -+ .ctl_scomp = comp_slew_rate_codes[SCOMP_CTL], -+ .clk_scomp = comp_slew_rate_codes[SCOMP_CLK], -+ .vccddq_hi = vddhi, -+ }; -+ ctrl->comp_ctl_1 = ddr_comp_ctl_1; -+ mchbar_write32(DDR_COMP_CTL_1, ctrl->comp_ctl_1.raw); -+} -+ -+static uint32_t ln_x100(const uint32_t input_x100) -+{ -+ uint32_t val = input_x100; -+ uint32_t ret = 0; -+ while (val > 271) { -+ val = (val * 1000) / 2718; -+ ret += 100; -+ } -+ return ret + (-16 * val * val + 11578 * val - 978860) / 10000; -+} -+ -+static uint32_t compute_vsshi_vref(struct sysinfo *ctrl, const uint32_t vsshi_tgt, bool up) -+{ -+ const uint32_t delta = 15; -+ const uint32_t c_die_vsshi = 2000; -+ const uint32_t r_cmd_ref = 100 * 10; -+ const uint32_t offset = up ? 64 : 0; -+ const uint32_t ln_vsshi = ln_x100((100 * vsshi_tgt) / (vsshi_tgt - delta)); -+ const uint32_t r_target = (ctrl->qclkps * 2000) / (c_die_vsshi * ln_vsshi); -+ const uint32_t r_dividend = 128 * (up ? r_cmd_ref : r_target); -+ return r_dividend / (r_cmd_ref + r_target) - offset; -+} -+ -+static void program_vsshi(struct sysinfo *ctrl, const uint16_t vccio_mv, const uint16_t vsshi) -+{ -+ const uint16_t vsshi_down = vsshi + 24; /* Panic threshold of 24 mV */ -+ const uint16_t vsshi_up = vccio_mv - vsshi_down; -+ const union ddr_comp_vsshi_reg ddr_comp_vsshi = { -+ .panic_drv_down_vref = compute_vsshi_vref(ctrl, vsshi_down, false), -+ .panic_drv_up_vref = compute_vsshi_vref(ctrl, vsshi_up, true), -+ .vt_offset = 128 * 450 / vccio_mv / 2, -+ .vt_slope_a = 4, -+ }; -+ mchbar_write32(DDR_COMP_VSSHI, ddr_comp_vsshi.raw); -+} -+ -+static void program_misc(struct sysinfo *ctrl) -+{ -+ ctrl->misc_control_0.raw = mchbar_read32(DDR_SCRAM_MISC_CONTROL); -+ ctrl->misc_control_0.weaklock_latency = 12; -+ ctrl->misc_control_0.wl_sleep_cycles = 5; -+ ctrl->misc_control_0.wl_wake_cycles = 2; -+ mchbar_write32(DDR_SCRAM_MISC_CONTROL, ctrl->misc_control_0.raw); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ /* Keep scrambling disabled for training */ -+ mchbar_write32(DDR_SCRAMBLE_ch(channel), 0); -+ } -+} -+ -+/* Very weird, application-specific function */ -+static void override_comp(uint32_t value, uint32_t width, uint32_t shift, uint32_t offset) -+{ -+ const uint32_t mask = (1 << width) - 1; -+ uint32_t reg32 = mchbar_read32(offset); -+ reg32 &= ~(mask << shift); -+ reg32 |= (value << shift); -+ mchbar_write32(offset, reg32); -+} -+ -+static void program_ls_comp(struct sysinfo *ctrl) -+{ -+ /* Disable periodic COMP */ -+ const union pcu_comp_reg m_comp = { -+ .comp_disable = 1, -+ .comp_interval = COMP_INT, -+ .comp_force = 1, -+ }; -+ mchbar_write32(M_COMP, m_comp.raw); -+ udelay(10); -+ -+ /* Override level shifter compensation */ -+ const uint32_t ls_comp = 2; -+ override_comp(ls_comp, 3, 28, DDR_DATA_RCOMP_DATA_1); -+ override_comp(ls_comp, 3, 24, DDR_CMD_COMP); -+ override_comp(ls_comp, 3, 24, DDR_CKE_CTL_COMP); -+ override_comp(ls_comp, 3, 23, DDR_CLK_COMP); -+ override_comp(ls_comp, 3, 28, DDR_COMP_DATA_COMP_1); -+ override_comp(ls_comp, 3, 24, DDR_COMP_CMD_COMP); -+ override_comp(ls_comp, 4, 24, DDR_COMP_CTL_COMP); -+ override_comp(ls_comp, 4, 23, DDR_COMP_CLK_COMP); -+ override_comp(ls_comp, 3, 24, DDR_COMP_OVERRIDE); -+ -+ /* Manually update the COMP values */ -+ union ddr_scram_misc_control_reg ddr_scram_misc_ctrl = ctrl->misc_control_0; -+ ddr_scram_misc_ctrl.force_comp_update = 1; -+ mchbar_write32(DDR_SCRAM_MISC_CONTROL, ddr_scram_misc_ctrl.raw); -+ -+ /* Use a fixed offset between ODT Up/Dn */ -+ const union ddr_comp_data_comp_1_reg data_comp_1 = { -+ .raw = mchbar_read32(DDR_COMP_DATA_COMP_1), -+ }; -+ const uint32_t odt_offset = data_comp_1.rcomp_odt_down - data_comp_1.rcomp_odt_up; -+ ctrl->comp_ctl_0.odt_up_down_off = odt_offset; -+ ctrl->comp_ctl_0.fixed_odt_offset = 1; -+ mchbar_write32(DDR_COMP_CTL_0, ctrl->comp_ctl_0.raw); -+} -+ -+/** TODO: Deduplicate PCODE stuff, it's already implemented in CPU code **/ -+static bool pcode_ready(void) -+{ -+ const unsigned int delay_step = 10; -+ for (unsigned int i = 0; i < 1000; i += delay_step) { -+ if (!(mchbar_read32(BIOS_MAILBOX_INTERFACE) & MAILBOX_RUN_BUSY)) -+ return true; -+ -+ udelay(delay_step); -+ }; -+ return false; -+} -+ -+static uint32_t pcode_mailbox_read(const uint32_t command) -+{ -+ if (!pcode_ready()) { -+ printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready\n"); -+ return 0; -+ } -+ mchbar_write32(BIOS_MAILBOX_INTERFACE, command | MAILBOX_RUN_BUSY); -+ if (!pcode_ready()) { -+ printk(BIOS_ERR, "PCODE: mailbox timeout on completion\n"); -+ return 0; -+ } -+ return mchbar_read32(BIOS_MAILBOX_DATA); -+} -+ -+static int pcode_mailbox_write(const uint32_t command, const uint32_t data) -+{ -+ if (!pcode_ready()) { -+ printk(BIOS_ERR, "PCODE: mailbox timeout on wait ready\n"); -+ return -1; -+ } -+ mchbar_write32(BIOS_MAILBOX_DATA, data); -+ mchbar_write32(BIOS_MAILBOX_INTERFACE, command | MAILBOX_RUN_BUSY); -+ if (!pcode_ready()) { -+ printk(BIOS_ERR, "PCODE: mailbox timeout on completion\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+static void enable_2x_refresh(struct sysinfo *ctrl) -+{ -+ if (!CONFIG(ENABLE_DDR_2X_REFRESH)) -+ return; -+ -+ printk(BIOS_DEBUG, "Enabling 2x Refresh\n"); -+ const bool asr = ctrl->flags.asr; -+ const bool lpddr = ctrl->lpddr; -+ -+ /* Mutually exclusive */ -+ assert(!asr || !lpddr); -+ if (!asr) { -+ uint32_t reg32 = pcode_mailbox_read(MAILBOX_BIOS_CMD_READ_DDR_2X_REFRESH); -+ if (!(reg32 & BIT(31))) { /** TODO: What to do if this is locked? **/ -+ reg32 |= BIT(0); /* Enable 2x refresh */ -+ reg32 |= BIT(31); /* Lock */ -+ -+ if (lpddr) -+ reg32 |= 4 << 1; /* LPDDR MR4 1/2 tREFI */ -+ -+ if (pcode_mailbox_write(MAILBOX_BIOS_CMD_WRITE_DDR_2X_REFRESH, reg32)) -+ printk(BIOS_ERR, "Could not enable Mailbox 2x Refresh\n"); -+ } -+ if (!lpddr) -+ return; -+ } -+ assert(asr || lpddr); -+ uint16_t refi_reduction = 50; -+ if (lpddr) { -+ refi_reduction = 97; -+ mchbar_clrbits32(PCU_DDR_PTM_CTL, 1 << 7); /* DISABLE_DRAM_TS */ -+ } -+ /** TODO: Remember why this is only done on cold boots **/ -+ if (ctrl->bootmode == BOOTMODE_COLD) { -+ ctrl->tREFI *= refi_reduction; -+ ctrl->tREFI /= 100; -+ } -+} -+ -+static void set_pcu_ddr_voltage(const uint16_t vdd_mv) -+{ -+ /** TODO: Handle other voltages? **/ -+ uint32_t pcu_ddr_voltage; -+ switch (vdd_mv) { -+ case 1200: -+ pcu_ddr_voltage = 3; -+ break; -+ case 1350: -+ pcu_ddr_voltage = 1; -+ break; -+ default: -+ case 1500: -+ pcu_ddr_voltage = 0; -+ break; -+ } -+ /* Set bits 0..2 */ -+ mchbar_write32(PCU_DDR_VOLTAGE, pcu_ddr_voltage); -+} -+ -+static void program_scheduler(struct sysinfo *ctrl) -+{ -+ /* -+ * ZQ calibration needs to be serialized for LPDDR3. Otherwise, -+ * the processor issues LPDDR3 ZQ calibration in parallel when -+ * exiting Package C7 or deeper. This causes problems for dual -+ * and quad die packages since all ranks share the same ZQ pin. -+ * -+ * Erratum HSM94: LPDDR3 ZQ Calibration Following Deep Package -+ * C-state Exit May Lead to Unpredictable System Behavior -+ */ -+ const union mcscheds_cbit_reg mcscheds_cbit = { -+ .dis_write_gap = 1, -+ .dis_odt = is_hsw_ult() && !(ctrl->lpddr && ctrl->lpddr_dram_odt), -+ .serialize_zq = ctrl->lpddr, -+ }; -+ mchbar_write32(MCSCHEDS_CBIT, mcscheds_cbit.raw); -+ mchbar_write32(MCMNTS_SC_WDBWM, 0x553c3038); -+ if (ctrl->lpddr) { -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ union mcmain_command_rate_limit_reg cmd_rate_limit = { -+ .raw = mchbar_read32(COMMAND_RATE_LIMIT_ch(channel)), -+ }; -+ cmd_rate_limit.enable_cmd_limit = 1; -+ cmd_rate_limit.cmd_rate_limit = 3; -+ mchbar_write32(COMMAND_RATE_LIMIT_ch(channel), cmd_rate_limit.raw); -+ } -+ } -+} -+ -+static uint8_t biggest_channel(const struct sysinfo *const ctrl) -+{ -+ _Static_assert(NUM_CHANNELS == 2, "Code assumes exactly two channels"); -+ return !!(ctrl->channel_size_mb[0] < ctrl->channel_size_mb[1]); -+} -+ -+static void dram_zones(struct sysinfo *ctrl) -+{ -+ /** TODO: Activate channel hash here, if enabled **/ -+ const uint8_t biggest = biggest_channel(ctrl); -+ const uint8_t smaller = !biggest; -+ -+ /** TODO: Use stacked mode if Memory Trace is enabled **/ -+ const union mad_chnl_reg mad_channel = { -+ .ch_a = biggest, -+ .ch_b = smaller, -+ .ch_c = 2, -+ .lpddr_mode = ctrl->lpddr, -+ }; -+ mchbar_write32(MAD_CHNL, mad_channel.raw); -+ -+ const uint8_t channel_b_zone_size = ctrl->channel_size_mb[smaller] / 256; -+ const union mad_zr_reg mad_zr = { -+ .ch_b_double = channel_b_zone_size * 2, -+ .ch_b_single = channel_b_zone_size, -+ }; -+ mchbar_write32(MAD_ZR, mad_zr.raw); -+} -+ -+static uint8_t biggest_dimm(const struct raminit_dimm_info *dimms) -+{ -+ _Static_assert(NUM_SLOTS <= 2, "Code assumes at most two DIMMs per channel."); -+ if (NUM_SLOTS == 1) -+ return 0; -+ -+ return !!(dimms[0].data.size_mb < dimms[1].data.size_mb); -+} -+ -+static void dram_dimm_mapping(struct sysinfo *ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) { -+ const union mad_dimm_reg mad_dimm = { -+ .rank_interleave = 1, -+ .enh_interleave = 1, -+ }; -+ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); -+ continue; -+ } -+ const uint8_t biggest = biggest_dimm(ctrl->dimms[channel]); -+ const uint8_t smaller = !biggest; -+ const struct dimm_attr_ddr3_st *dimm_a = &ctrl->dimms[channel][biggest].data; -+ const struct dimm_attr_ddr3_st *dimm_b = &ctrl->dimms[channel][smaller].data; -+ union mad_dimm_reg mad_dimm = { -+ .dimm_a_size = dimm_a->size_mb / 256, -+ .dimm_b_size = dimm_b->size_mb / 256, -+ .dimm_a_sel = biggest, -+ .dimm_a_ranks = dimm_a->ranks == 2, -+ .dimm_b_ranks = dimm_b->ranks == 2, -+ .dimm_a_width = dimm_a->width == 16, -+ .dimm_b_width = dimm_b->width == 16, -+ .rank_interleave = 1, -+ .enh_interleave = 1, -+ .ecc_mode = 0, /* Do not enable ECC yet */ -+ }; -+ if (is_hsw_ult()) -+ mad_dimm.dimm_b_width = mad_dimm.dimm_a_width; -+ -+ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); -+ if (ctrl->lpddr) -+ die("%s: Missing LPDDR support (LPDDR_MR_PARAMS)\n", __func__); -+ } -+} -+ -+enum raminit_status configure_mc(struct sysinfo *ctrl) -+{ -+ const uint16_t vccio_mv = 1000; -+ const uint16_t vsshi_mv = ctrl->vdd_mv - 950; -+ const bool dis_odt_static = is_hsw_ult(); /* Disable static ODT legs on ULT */ -+ const bool vddhi = ctrl->vdd_mv > 1350; -+ -+ program_misc_control(ctrl); -+ program_mrc_revision(); -+ program_ranks_used(ctrl); -+ program_ddr_data(ctrl, dis_odt_static, vddhi); -+ program_vsshi_control(ctrl, vsshi_mv); -+ program_dimm_vref(ctrl, vccio_mv, vddhi); -+ program_ddr_ca(ctrl, vddhi); -+ program_rcomp_vref(ctrl, dis_odt_static); -+ program_slew_rates(ctrl, vddhi); -+ program_vsshi(ctrl, vccio_mv, vsshi_mv); -+ program_misc(ctrl); -+ program_ls_comp(ctrl); -+ enable_2x_refresh(ctrl); -+ set_pcu_ddr_voltage(ctrl->vdd_mv); -+ configure_timings(ctrl); -+ configure_refresh(ctrl); -+ program_scheduler(ctrl); -+ dram_zones(ctrl); -+ dram_dimm_mapping(ctrl); -+ -+ return RAMINIT_STATUS_SUCCESS; -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 2fea658415..fcc981ad04 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -22,6 +22,7 @@ static const struct task_entry cold_boot[] = { - { collect_spd_info, true, "PROCSPD", }, - { initialise_mpll, true, "INITMPLL", }, - { convert_timings, true, "CONVTIM", }, -+ { configure_mc, true, "CONFMC", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -@@ -53,6 +54,7 @@ static void initialize_ctrl(struct sysinfo *ctrl) - - ctrl->cpu = cpu_get_cpuid(); - ctrl->stepping = get_stepping(ctrl->cpu); -+ ctrl->vdd_mv = is_hsw_ult() ? 1350 : 1500; /** FIXME: Hardcoded, does it matter? **/ - ctrl->dq_pins_interleaved = cfg->dq_pins_interleaved; - ctrl->bootmode = bootmode; - } -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index e0ebd3a2a7..fffa6d5450 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -3,16 +3,41 @@ - #ifndef HASWELL_RAMINIT_NATIVE_H - #define HASWELL_RAMINIT_NATIVE_H - -+#include - #include - #include -+#include -+#include -+ -+#include "reg_structs.h" - - /** TODO (Angel): Remove this after in-review patches are submitted **/ - #define SPD_LEN SPD_SIZE_MAX_DDR3 - -+/* Each channel has 4 ranks, spread across 2 slots */ -+#define NUM_SLOTRANKS 4 -+ -+#define NUM_GROUPS 2 -+ - /* 8 data lanes + 1 ECC lane */ - #define NUM_LANES 9 - #define NUM_LANES_NO_ECC 8 - -+#define COMP_INT 10 -+ -+/* Always use 12 legs for emphasis (not trained) */ -+#define TXEQFULLDRV (3 << 4) -+ -+enum command_training_iteration { -+ CT_ITERATION_CLOCK = 0, -+ CT_ITERATION_CMD_NORTH, -+ CT_ITERATION_CMD_SOUTH, -+ CT_ITERATION_CKE, -+ CT_ITERATION_CTL, -+ CT_ITERATION_CMD_VREF, -+ MAX_CT_ITERATION, -+}; -+ - enum raminit_boot_mode { - BOOTMODE_COLD, - BOOTMODE_WARM, -@@ -58,6 +83,9 @@ struct sysinfo { - * LPDDR-specific functions have stubs which will halt upon execution. - */ - bool lpddr; -+ bool lpddr_dram_odt; -+ uint8_t lpddr_cke_rank_map[NUM_CHANNELS]; -+ uint8_t dq_byte_map[NUM_CHANNELS][MAX_CT_ITERATION][2]; - - struct raminit_dimm_info dimms[NUM_CHANNELS][NUM_SLOTS]; - union dimm_flags_ddr3_st flags; -@@ -94,16 +122,89 @@ struct sysinfo { - uint32_t mem_clock_mhz; - uint32_t mem_clock_fs; /* Memory clock period in femtoseconds */ - uint32_t qclkps; /* Quadrature clock period in picoseconds */ -+ -+ uint16_t vdd_mv; -+ -+ union ddr_scram_misc_control_reg misc_control_0; -+ -+ union ddr_comp_ctl_0_reg comp_ctl_0; -+ union ddr_comp_ctl_1_reg comp_ctl_1; -+ -+ union ddr_data_vref_adjust_reg dimm_vref; -+ -+ uint32_t data_offset_train[NUM_CHANNELS][NUM_LANES]; -+ uint32_t data_offset_comp[NUM_CHANNELS][NUM_LANES]; -+ -+ uint32_t dq_control_0[NUM_CHANNELS]; -+ uint32_t dq_control_1[NUM_CHANNELS][NUM_LANES]; -+ uint32_t dq_control_2[NUM_CHANNELS][NUM_LANES]; -+ -+ uint16_t tx_dq[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ uint16_t txdqs[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ uint8_t tx_eq[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ -+ uint16_t rcven[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ uint8_t rx_eq[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ uint8_t rxdqsp[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ uint8_t rxdqsn[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ int8_t rxvref[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; -+ -+ uint8_t clk_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; -+ uint8_t ctl_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; -+ uint8_t cke_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; -+ -+ uint8_t cke_cmd_pi_code[NUM_CHANNELS][NUM_GROUPS]; -+ uint8_t cmd_north_pi_code[NUM_CHANNELS][NUM_GROUPS]; -+ uint8_t cmd_south_pi_code[NUM_CHANNELS][NUM_GROUPS]; - }; - -+static inline bool is_hsw_ult(void) -+{ -+ return CONFIG(INTEL_LYNXPOINT_LP); -+} -+ -+static inline bool rank_in_mask(uint8_t rank, uint8_t rankmask) -+{ -+ assert(rank < NUM_SLOTRANKS); -+ return !!(BIT(rank) & rankmask); -+} -+ -+static inline bool does_ch_exist(const struct sysinfo *ctrl, uint8_t channel) -+{ -+ return !!ctrl->dpc[channel]; -+} -+ -+static inline bool does_rank_exist(const struct sysinfo *ctrl, uint8_t rank) -+{ -+ return rank_in_mask(rank, ctrl->rankmap[0] | ctrl->rankmap[1]); -+} -+ -+static inline bool rank_in_ch(const struct sysinfo *ctrl, uint8_t rank, uint8_t channel) -+{ -+ assert(channel < NUM_CHANNELS); -+ return rank_in_mask(rank, ctrl->rankmap[channel]); -+} -+ -+/** TODO: Handling of data_offset_train could be improved, also coupled with reg updates **/ -+static inline void clear_data_offset_train_all(struct sysinfo *ctrl) -+{ -+ memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); -+} -+ - void raminit_main(enum raminit_boot_mode bootmode); - - enum raminit_status collect_spd_info(struct sysinfo *ctrl); - enum raminit_status initialise_mpll(struct sysinfo *ctrl); - enum raminit_status convert_timings(struct sysinfo *ctrl); -+enum raminit_status configure_mc(struct sysinfo *ctrl); -+ -+void configure_timings(struct sysinfo *ctrl); -+void configure_refresh(struct sysinfo *ctrl); - - enum raminit_status wait_for_first_rcomp(void); - -+uint8_t get_rx_bias(const struct sysinfo *ctrl); -+ - uint8_t get_tCWL(uint32_t mem_clock_mhz); - uint32_t get_tREFI(uint32_t mem_clock_mhz); - uint32_t get_tXP(uint32_t mem_clock_mhz); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -new file mode 100644 -index 0000000000..d11cda4b3d ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -0,0 +1,405 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#ifndef HASWELL_RAMINIT_REG_STRUCTS_H -+#define HASWELL_RAMINIT_REG_STRUCTS_H -+ -+union ddr_data_rx_train_rank_reg { -+ struct __packed { -+ uint32_t rcven : 9; // Bits 8:0 -+ uint32_t dqs_p : 6; // Bits 14:9 -+ uint32_t rx_eq : 5; // Bits 19:15 -+ uint32_t dqs_n : 6; // Bits 25:20 -+ int32_t vref : 6; // Bits 31:26 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_data_tx_train_rank_reg { -+ struct __packed { -+ uint32_t dq_delay : 9; // Bits 8:0 -+ uint32_t dqs_delay : 9; // Bits 17:9 -+ uint32_t : 2; // Bits 19:18 -+ uint32_t tx_eq : 6; // Bits 25:20 -+ uint32_t : 6; // Bits 31:26 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_data_control_0_reg { -+ struct __packed { -+ uint32_t rx_training_mode : 1; // Bits 0:0 -+ uint32_t wl_training_mode : 1; // Bits 1:1 -+ uint32_t rl_training_mode : 1; // Bits 2:2 -+ uint32_t samp_train_mode : 1; // Bits 3:3 -+ uint32_t tx_on : 1; // Bits 4:4 -+ uint32_t rf_on : 1; // Bits 5:5 -+ uint32_t rx_pi_on : 1; // Bits 6:6 -+ uint32_t tx_pi_on : 1; // Bits 7:7 -+ uint32_t internal_clocks_on : 1; // Bits 8:8 -+ uint32_t repeater_clocks_on : 1; // Bits 9:9 -+ uint32_t tx_disable : 1; // Bits 10:10 -+ uint32_t rx_disable : 1; // Bits 11:11 -+ uint32_t tx_long : 1; // Bits 12:12 -+ uint32_t rx_dqs_ctle : 2; // Bits 14:13 -+ uint32_t rx_read_pointer : 3; // Bits 17:15 -+ uint32_t driver_segment_enable : 1; // Bits 18:18 -+ uint32_t data_vccddq_hi : 1; // Bits 19:19 -+ uint32_t read_rf_rd : 1; // Bits 20:20 -+ uint32_t read_rf_wr : 1; // Bits 21:21 -+ uint32_t read_rf_rank : 2; // Bits 23:22 -+ uint32_t force_odt_on : 1; // Bits 24:24 -+ uint32_t odt_samp_off : 1; // Bits 25:25 -+ uint32_t disable_odt_static : 1; // Bits 26:26 -+ uint32_t ddr_cr_force_odt_on : 1; // Bits 27:27 -+ uint32_t lpddr_mode : 1; // Bits 28:28 -+ uint32_t en_read_preamble : 1; // Bits 29:29 -+ uint32_t odt_samp_extend_en : 1; // Bits 30:30 -+ uint32_t early_rleak_en : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_data_control_1_reg { -+ struct __packed { -+ int32_t ref_pi : 4; // Bits 3:0 -+ uint32_t dll_mask : 2; // Bits 5:4 -+ uint32_t dll_weaklock : 1; // Bits 6:6 -+ uint32_t sdll_segment_disable : 3; // Bits 9:7 -+ uint32_t rx_bias_ctl : 3; // Bits 12:10 -+ int32_t odt_delay : 4; // Bits 16:13 -+ uint32_t odt_duration : 3; // Bits 19:17 -+ int32_t sense_amp_delay : 4; // Bits 23:20 -+ uint32_t sense_amp_duration : 3; // Bits 26:24 -+ uint32_t burst_end_odt_delay : 3; // Bits 29:27 *** TODO: Check Broadwell *** -+ uint32_t lpddr_long_odt_en : 1; // Bits 30:30 -+ uint32_t : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+/* NOTE: Bits 31:19 are only valid for Broadwell onwards */ -+union ddr_data_control_2_reg { -+ struct __packed { -+ uint32_t rx_stagger_ctl : 5; // Bits 4:0 -+ uint32_t force_bias_on : 1; // Bits 5:5 -+ uint32_t force_rx_on : 1; // Bits 6:6 -+ uint32_t leaker_comp : 2; // Bits 8:7 -+ uint32_t rx_dqs_amp_offset : 4; // Bits 12:9 -+ uint32_t rx_clk_stg_num : 5; // Bits 17:13 -+ uint32_t wl_long_delay : 1; // Bits 18:18 -+ uint32_t enable_vref_pwrdn : 1; // Bits 19:19 -+ uint32_t ddr4_mode : 1; // Bits 20:20 -+ uint32_t en_vddq_odt : 1; // Bits 21:21 -+ uint32_t en_vtt_odt : 1; // Bits 22:22 -+ uint32_t en_const_z_eq_tx : 1; // Bits 23:23 -+ uint32_t tx_eq_dis : 1; // Bits 24:24 -+ uint32_t rx_vref_prog_mfc : 1; // Bits 25:25 -+ uint32_t cben : 3; // Bits 28:26 -+ uint32_t tx_deskew_disable : 1; // Bits 29:29 -+ uint32_t rx_deskew_disable : 1; // Bits 30:30 -+ uint32_t dq_slew_dly_byp : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_comp_data_comp_1_reg { -+ struct __packed { -+ uint32_t rcomp_odt_up : 6; // Bits 5:0 -+ uint32_t : 3; // Bits 8:6 -+ uint32_t rcomp_odt_down : 6; // Bits 14:9 -+ uint32_t : 1; // Bits 15:15 -+ uint32_t panic_drv_down : 6; // Bits 21:16 -+ uint32_t panic_drv_up : 6; // Bits 27:22 -+ uint32_t ls_comp : 3; // Bits 30:28 -+ uint32_t : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_comp_ctl_0_reg { -+ struct __packed { -+ uint32_t : 3; // Bits 2:0 -+ uint32_t disable_odt_static : 1; // Bits 3:3 -+ uint32_t odt_up_down_off : 6; // Bits 9:4 -+ uint32_t fixed_odt_offset : 1; // Bits 10:10 -+ int32_t dq_drv_vref : 4; // Bits 14:11 -+ int32_t dq_odt_vref : 5; // Bits 19:15 -+ int32_t cmd_drv_vref : 4; // Bits 23:20 -+ int32_t ctl_drv_vref : 4; // Bits 27:24 -+ int32_t clk_drv_vref : 4; // Bits 31:28 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_comp_ctl_1_reg { -+ struct __packed { -+ uint32_t dq_scomp : 5; // Bits 4:0 -+ uint32_t cmd_scomp : 5; // Bits 9:5 -+ uint32_t ctl_scomp : 5; // Bits 14:10 -+ uint32_t clk_scomp : 5; // Bits 19:15 -+ uint32_t tco_cmd_offset : 4; // Bits 23:20 -+ uint32_t comp_clk_on : 1; // Bits 24:24 -+ uint32_t vccddq_hi : 1; // Bits 25:25 -+ uint32_t : 3; // Bits 28:26 -+ uint32_t dis_quick_comp : 1; // Bits 29:29 -+ uint32_t sin_step : 1; // Bits 30:30 -+ uint32_t sin_step_adv : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_data_vref_adjust_reg { -+ struct __packed { -+ int32_t ca_vref_ctrl : 7;// Bits 6:0 -+ int32_t ch1_vref_ctrl : 7;// Bits 13:7 -+ int32_t ch0_vref_ctrl : 7;// Bits 20:14 -+ uint32_t en_dimm_vref_ca : 1;// Bits 21:21 -+ uint32_t en_dimm_vref_ch1 : 1;// Bits 22:22 -+ uint32_t en_dimm_vref_ch0 : 1;// Bits 23:23 -+ uint32_t hi_z_timer_ctrl : 2;// Bits 25:24 -+ uint32_t vccddq_hi_qnnn_h : 1;// Bits 26:26 -+ uint32_t : 2;// Bits 28:27 -+ uint32_t ca_slow_bw : 1;// Bits 29:29 -+ uint32_t ch0_slow_bw : 1;// Bits 30:30 -+ uint32_t ch1_slow_bw : 1;// Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_data_vref_control_reg { -+ struct __packed { -+ uint32_t hi_bw_divider : 2; // Bits 1:0 -+ uint32_t lo_bw_divider : 2; // Bits 3:2 -+ uint32_t sample_divider : 3; // Bits 6:4 -+ uint32_t open_loop : 1; // Bits 7:7 -+ uint32_t slow_bw_error : 2; // Bits 9:8 -+ uint32_t hi_bw_enable : 1; // Bits 10:10 -+ uint32_t : 1; // Bits 11:11 -+ uint32_t vt_slope_b : 3; // Bits 14:12 -+ uint32_t vt_slope_a : 3; // Bits 17:15 -+ uint32_t vt_offset : 3; // Bits 20:18 -+ uint32_t sel_code : 3; // Bits 23:21 -+ uint32_t output_code : 8; // Bits 31:24 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_comp_vsshi_reg { -+ struct __packed { -+ uint32_t panic_drv_down_vref : 6; // Bits 5:0 -+ uint32_t panic_drv_up_vref : 6; // Bits 11:6 -+ uint32_t vt_offset : 5; // Bits 16:12 -+ uint32_t vt_slope_a : 3; // Bits 19:17 -+ uint32_t vt_slope_b : 3; // Bits 22:20 -+ uint32_t : 9; // Bits 31:23 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_comp_vsshi_control_reg { -+ struct __packed { -+ uint32_t vsshi_target : 6; // Bits 5:0 -+ uint32_t hi_bw_divider : 2; // Bits 7:6 -+ uint32_t lo_bw_divider : 2; // Bits 9:8 -+ uint32_t sample_divider : 3; // Bits 12:10 -+ uint32_t open_loop : 1; // Bits 13:13 -+ uint32_t bw_error : 2; // Bits 15:14 -+ uint32_t panic_driver_en : 1; // Bits 16:16 -+ uint32_t : 1; // Bits 17:17 -+ uint32_t panic_voltage : 4; // Bits 21:18 -+ uint32_t gain_boost : 1; // Bits 22:22 -+ uint32_t sel_code : 1; // Bits 23:23 -+ uint32_t output_code : 8; // Bits 31:24 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_clk_controls_reg { -+ struct __packed { -+ uint32_t ref_pi : 4; // Bits 3:0 -+ uint32_t dll_mask : 2; // Bits 5:4 -+ uint32_t : 1; // Bits 6:6 -+ uint32_t tx_on : 1; // Bits 7:7 -+ uint32_t internal_clocks_on : 1; // Bits 8:8 -+ uint32_t repeater_clocks_on : 1; // Bits 9:9 -+ uint32_t io_lb_ctl : 2; // Bits 11:10 -+ uint32_t odt_mode : 1; // Bits 12:12 -+ uint32_t : 8; // Bits 20:13 -+ uint32_t rx_vref : 6; // Bits 26:21 -+ uint32_t vccddq_hi : 1; // Bits 27:27 -+ uint32_t dll_weaklock : 1; // Bits 28:28 -+ uint32_t lpddr_mode : 1; // Bits 29:29 -+ uint32_t : 2; // Bits 31:30 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_cmd_controls_reg { -+ struct __packed { -+ int32_t ref_pi : 4; // Bits 3:0 -+ uint32_t dll_mask : 2; // Bits 5:4 -+ uint32_t : 1; // Bits 6:6 -+ uint32_t tx_on : 1; // Bits 7:7 -+ uint32_t internal_clocks_on : 1; // Bits 8:8 -+ uint32_t repeater_clocks_on : 1; // Bits 9:9 -+ uint32_t io_lb_ctl : 2; // Bits 11:10 -+ uint32_t odt_mode : 1; // Bits 12:12 -+ uint32_t cmd_tx_eq : 2; // Bits 14:13 -+ uint32_t early_weak_drive : 2; // Bits 16:15 -+ uint32_t : 4; // Bits 20:17 -+ int32_t rx_vref : 6; // Bits 26:21 -+ uint32_t vccddq_hi : 1; // Bits 27:27 -+ uint32_t dll_weaklock : 1; // Bits 28:28 -+ uint32_t lpddr_mode : 1; // Bits 29:29 -+ uint32_t lpddr_ca_a_dis : 1; // Bits 30:30 -+ uint32_t lpddr_ca_b_dis : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+/* Same register definition for CKE and CTL fubs */ -+union ddr_cke_ctl_controls_reg { -+ struct __packed { -+ int32_t ref_pi : 4; // Bits 3:0 -+ uint32_t dll_mask : 2; // Bits 5:4 -+ uint32_t : 1; // Bits 6:6 -+ uint32_t tx_on : 1; // Bits 7:7 -+ uint32_t internal_clocks_on : 1; // Bits 8:8 -+ uint32_t repeater_clocks_on : 1; // Bits 9:9 -+ uint32_t io_lb_ctl : 2; // Bits 11:10 -+ uint32_t odt_mode : 1; // Bits 12:12 -+ uint32_t cmd_tx_eq : 2; // Bits 14:13 -+ uint32_t early_weak_drive : 2; // Bits 16:15 -+ uint32_t ctl_tx_eq : 2; // Bits 18:17 -+ uint32_t ctl_sr_drv : 2; // Bits 20:19 -+ int32_t rx_vref : 6; // Bits 26:21 -+ uint32_t vccddq_hi : 1; // Bits 27:27 -+ uint32_t dll_weaklock : 1; // Bits 28:28 -+ uint32_t lpddr_mode : 1; // Bits 29:29 -+ uint32_t la_drv_en_ovrd : 1; // Bits 30:30 -+ uint32_t lpddr_ca_a_dis : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union ddr_scram_misc_control_reg { -+ struct __packed { -+ uint32_t wl_wake_cycles : 2; // Bits 1:0 -+ uint32_t wl_sleep_cycles : 3; // Bits 4:2 -+ uint32_t force_comp_update : 1; // Bits 5:5 -+ uint32_t weaklock_latency : 4; // Bits 9:6 -+ uint32_t ddr_no_ch_interleave : 1; // Bits 10:10 -+ uint32_t lpddr_mode : 1; // Bits 11:11 -+ uint32_t cke_mapping_ch0 : 4; // Bits 15:12 -+ uint32_t cke_mapping_ch1 : 4; // Bits 19:16 -+ uint32_t : 12; // Bits 31:20 -+ }; -+ uint32_t raw; -+}; -+ -+union mcscheds_cbit_reg { -+ struct __packed { -+ uint32_t dis_opp_cas : 1; // Bits 0:0 -+ uint32_t dis_opp_is_cas : 1; // Bits 1:1 -+ uint32_t dis_opp_ras : 1; // Bits 2:2 -+ uint32_t dis_opp_is_ras : 1; // Bits 3:3 -+ uint32_t dis_1c_byp : 1; // Bits 4:4 -+ uint32_t dis_2c_byp : 1; // Bits 5:5 -+ uint32_t dis_deprd_opt : 1; // Bits 6:6 -+ uint32_t dis_pt_it : 1; // Bits 7:7 -+ uint32_t dis_prcnt_ring : 1; // Bits 8:8 -+ uint32_t dis_prcnt_sa : 1; // Bits 9:9 -+ uint32_t dis_blkr_ph : 1; // Bits 10:10 -+ uint32_t dis_blkr_pe : 1; // Bits 11:11 -+ uint32_t dis_blkr_pm : 1; // Bits 12:12 -+ uint32_t dis_odt : 1; // Bits 13:13 -+ uint32_t oe_always_off : 1; // Bits 14:14 -+ uint32_t : 1; // Bits 15:15 -+ uint32_t dis_aom : 1; // Bits 16:16 -+ uint32_t block_rpq : 1; // Bits 17:17 -+ uint32_t block_wpq : 1; // Bits 18:18 -+ uint32_t invert_align : 1; // Bits 19:19 -+ uint32_t dis_write_gap : 1; // Bits 20:20 -+ uint32_t dis_zq : 1; // Bits 21:21 -+ uint32_t dis_tt : 1; // Bits 22:22 -+ uint32_t dis_opp_ref : 1; // Bits 23:23 -+ uint32_t long_zq : 1; // Bits 24:24 -+ uint32_t dis_srx_zq : 1; // Bits 25:25 -+ uint32_t serialize_zq : 1; // Bits 26:26 -+ uint32_t zq_fast_exec : 1; // Bits 27:27 -+ uint32_t dis_drive_nop : 1; // Bits 28:28 -+ uint32_t pres_wdb_ent : 1; // Bits 29:29 -+ uint32_t dis_clk_gate : 1; // Bits 30:30 -+ uint32_t : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union mcmain_command_rate_limit_reg { -+ struct __packed { -+ uint32_t enable_cmd_limit : 1; // Bits 0:0 -+ uint32_t cmd_rate_limit : 3; // Bits 3:1 -+ uint32_t reset_on_command : 4; // Bits 7:4 -+ uint32_t reset_delay : 4; // Bits 11:8 -+ uint32_t ck_to_cke_delay : 2; // Bits 13:12 -+ uint32_t : 17; // Bits 30:14 -+ uint32_t init_mrw_2n_cs : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union mad_chnl_reg { -+ struct __packed { -+ uint32_t ch_a : 2; // Bits 1:0 -+ uint32_t ch_b : 2; // Bits 3:2 -+ uint32_t ch_c : 2; // Bits 5:4 -+ uint32_t stacked_mode : 1; // Bits 6:6 -+ uint32_t stkd_mode_bits : 3; // Bits 9:7 -+ uint32_t lpddr_mode : 1; // Bits 10:10 -+ uint32_t : 21; // Bits 31:11 -+ }; -+ uint32_t raw; -+}; -+ -+union mad_dimm_reg { -+ struct __packed { -+ uint32_t dimm_a_size : 8; // Bits 7:0 -+ uint32_t dimm_b_size : 8; // Bits 15:8 -+ uint32_t dimm_a_sel : 1; // Bits 16:16 -+ uint32_t dimm_a_ranks : 1; // Bits 17:17 -+ uint32_t dimm_b_ranks : 1; // Bits 18:18 -+ uint32_t dimm_a_width : 1; // Bits 19:19 -+ uint32_t dimm_b_width : 1; // Bits 20:20 -+ uint32_t rank_interleave : 1; // Bits 21:21 -+ uint32_t enh_interleave : 1; // Bits 22:22 -+ uint32_t : 1; // Bits 23:23 -+ uint32_t ecc_mode : 2; // Bits 25:24 -+ uint32_t hori_mode : 1; // Bits 26:26 -+ uint32_t hori_address : 3; // Bits 29:27 -+ uint32_t : 2; // Bits 31:30 -+ }; -+ uint32_t raw; -+}; -+ -+union mad_zr_reg { -+ struct __packed { -+ uint32_t : 16; // Bits 15:0 -+ uint32_t ch_b_double : 8; // Bits 23:16 -+ uint32_t ch_b_single : 8; // Bits 31:24 -+ }; -+ uint32_t raw; -+}; -+ -+/* Same definition for P_COMP, M_COMP, D_COMP */ -+union pcu_comp_reg { -+ struct __packed { -+ uint32_t comp_disable : 1; // Bits 0:0 -+ uint32_t comp_interval : 4; // Bits 4:1 -+ uint32_t : 3; // Bits 7:5 -+ uint32_t comp_force : 1; // Bits 8:8 -+ uint32_t : 23; // Bits 31:9 -+ }; -+ uint32_t raw; -+}; -+ -+#endif -diff --git a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c -new file mode 100644 -index 0000000000..a9d960f31b ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c -@@ -0,0 +1,13 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include "raminit_native.h" -+ -+void configure_timings(struct sysinfo *ctrl) -+{ -+ /** TODO: Stub **/ -+} -+ -+void configure_refresh(struct sysinfo *ctrl) -+{ -+ /** TODO: Stub **/ -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 45f8174995..4c3f399b5d 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -7,9 +7,98 @@ - #define NUM_CHANNELS 2 - #define NUM_SLOTS 2 - -+/* Indexed register helper macros */ -+#define _DDRIO_C_R_B(r, ch, rank, byte) ((r) + 0x100 * (ch) + 0x4 * (rank) + 0x200 * (byte)) -+#define _MCMAIN_C_X(r, ch, x) ((r) + 0x400 * (ch) + 0x4 * (x)) -+#define _MCMAIN_C(r, ch) ((r) + 0x400 * (ch)) -+ - /* Register definitions */ -+ -+/* DDR DATA per-channel per-bytelane */ -+#define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) -+ -+/* DDR CKE per-channel */ -+#define DDR_CKE_ch_CMD_COMP_OFFSET(ch) _DDRIO_C_R_B(0x1204, ch, 0, 0) -+#define DDR_CKE_ch_CMD_PI_CODING(ch) _DDRIO_C_R_B(0x1208, ch, 0, 0) -+ -+#define DDR_CKE_ch_CTL_CONTROLS(ch) _DDRIO_C_R_B(0x121c, ch, 0, 0) -+#define DDR_CKE_ch_CTL_RANKS_USED(ch) _DDRIO_C_R_B(0x1220, ch, 0, 0) -+ -+/* DDR CTL per-channel */ -+#define DDR_CTL_ch_CTL_CONTROLS(ch) _DDRIO_C_R_B(0x1c1c, ch, 0, 0) -+#define DDR_CTL_ch_CTL_RANKS_USED(ch) _DDRIO_C_R_B(0x1c20, ch, 0, 0) -+ -+/* DDR CLK per-channel */ -+#define DDR_CLK_ch_RANKS_USED(ch) _DDRIO_C_R_B(0x1800, ch, 0, 0) -+#define DDR_CLK_ch_COMP_OFFSET(ch) _DDRIO_C_R_B(0x1808, ch, 0, 0) -+#define DDR_CLK_ch_PI_CODING(ch) _DDRIO_C_R_B(0x180c, ch, 0, 0) -+#define DDR_CLK_ch_CONTROLS(ch) _DDRIO_C_R_B(0x1810, ch, 0, 0) -+ -+/* DDR Scrambler */ -+#define DDR_SCRAMBLE_ch(ch) (0x2000 + 4 * (ch)) -+#define DDR_SCRAM_MISC_CONTROL 0x2008 -+ -+/* DDR CMDN/CMDS per-channel (writes go to both CMDN and CMDS fubs) */ -+#define DDR_CMD_ch_COMP_OFFSET(ch) _DDRIO_C_R_B(0x3204, ch, 0, 0) -+#define DDR_CMD_ch_PI_CODING(ch) _DDRIO_C_R_B(0x3208, ch, 0, 0) -+#define DDR_CMD_ch_CONTROLS(ch) _DDRIO_C_R_B(0x320c, ch, 0, 0) -+ -+/* DDR CKE/CTL per-channel (writes go to both CKE and CTL fubs) */ -+#define DDR_CKE_CTL_ch_CTL_COMP_OFFSET(ch) _DDRIO_C_R_B(0x3414, ch, 0, 0) -+#define DDR_CKE_CTL_ch_CTL_PI_CODING(ch) _DDRIO_C_R_B(0x3418, ch, 0, 0) -+ -+/* DDR DATA broadcast */ -+#define DDR_DATA_RX_TRAIN_RANK(rank) _DDRIO_C_R_B(0x3600, 0, rank, 0) -+#define DDR_DATA_RX_PER_BIT_RANK(rank) _DDRIO_C_R_B(0x3610, 0, rank, 0) -+#define DDR_DATA_TX_TRAIN_RANK(rank) _DDRIO_C_R_B(0x3620, 0, rank, 0) -+#define DDR_DATA_TX_PER_BIT_RANK(rank) _DDRIO_C_R_B(0x3630, 0, rank, 0) -+ -+#define DDR_DATA_RCOMP_DATA_1 0x3644 -+#define DDR_DATA_TX_XTALK 0x3648 -+#define DDR_DATA_RX_OFFSET_VDQ 0x364c -+#define DDR_DATA_OFFSET_COMP 0x365c -+#define DDR_DATA_CONTROL_1 0x3660 -+ -+#define DDR_DATA_OFFSET_TRAIN 0x3670 -+#define DDR_DATA_CONTROL_0 0x3674 -+#define DDR_DATA_VREF_ADJUST 0x3678 -+ -+/* DDR CMD broadcast */ -+#define DDR_CMD_COMP 0x3700 -+ -+/* DDR CKE/CTL broadcast */ -+#define DDR_CKE_CTL_COMP 0x3810 -+ -+/* DDR CLK broadcast */ -+#define DDR_CLK_COMP 0x3904 -+#define DDR_CLK_CONTROLS 0x3910 -+#define DDR_CLK_CB_STATUS 0x3918 -+ -+/* DDR COMP (global) */ -+#define DDR_COMP_DATA_COMP_1 0x3a04 -+#define DDR_COMP_CMD_COMP 0x3a08 -+#define DDR_COMP_CTL_COMP 0x3a0c -+#define DDR_COMP_CLK_COMP 0x3a10 -+#define DDR_COMP_CTL_0 0x3a14 -+#define DDR_COMP_CTL_1 0x3a18 -+#define DDR_COMP_VSSHI 0x3a1c -+#define DDR_COMP_OVERRIDE 0x3a20 -+#define DDR_COMP_VSSHI_CONTROL 0x3a24 -+ -+/* MCMAIN per-channel */ -+#define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch) -+ -+#define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) -+ -+/* MCMAIN broadcast */ -+#define MCSCHEDS_CBIT 0x4c20 -+ -+#define MCMNTS_SC_WDBWM 0x4f8c -+ -+/* MCDECS */ - #define MAD_CHNL 0x5000 /* Address Decoder Channel Configuration */ - #define MAD_DIMM(ch) (0x5004 + (ch) * 4) -+#define MAD_ZR 0x5014 - #define MC_INIT_STATE_G 0x5030 - #define MRC_REVISION 0x5034 /* MRC Revision */ - -@@ -28,6 +117,8 @@ - - #define PCU_DDR_PTM_CTL 0x5880 - -+#define PCU_DDR_VOLTAGE 0x58a4 -+ - /* Some power MSRs are also represented in MCHBAR */ - #define MCH_PKG_POWER_LIMIT_LO 0x59a0 - #define MCH_PKG_POWER_LIMIT_HI 0x59a4 -@@ -48,6 +139,8 @@ - #define MAILBOX_BIOS_CMD_FSM_MEASURE_INTVL 0x909 - #define MAILBOX_BIOS_CMD_READ_PCH_POWER 0xa - #define MAILBOX_BIOS_CMD_READ_PCH_POWER_EXT 0xb -+#define MAILBOX_BIOS_CMD_READ_DDR_2X_REFRESH 0x17 -+#define MAILBOX_BIOS_CMD_WRITE_DDR_2X_REFRESH 0x18 - #define MAILBOX_BIOS_CMD_READ_C9C10_VOLTAGE 0x26 - #define MAILBOX_BIOS_CMD_WRITE_C9C10_VOLTAGE 0x27 - -@@ -66,6 +159,7 @@ - #define MC_BIOS_REQ 0x5e00 /* Memory frequency request register */ - #define MC_BIOS_DATA 0x5e04 /* Miscellaneous information for BIOS */ - #define SAPMCTL 0x5f00 -+#define M_COMP 0x5f08 - - #define HDAUDRID 0x6008 - #define UMAGFXCTL 0x6020 --- -2.39.5 - diff --git a/config/coreboot/default/patches/0046-haswell-NRI-Add-timings-refresh-programming.patch b/config/coreboot/default/patches/0046-haswell-NRI-Add-timings-refresh-programming.patch deleted file mode 100644 index 73234ac5..00000000 --- a/config/coreboot/default/patches/0046-haswell-NRI-Add-timings-refresh-programming.patch +++ /dev/null @@ -1,541 +0,0 @@ -From 694d1650cad8573e899916c0d0a25604885f6e3b Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sat, 7 May 2022 20:59:58 +0200 -Subject: [PATCH 46/65] haswell NRI: Add timings/refresh programming - -Program the registers with timing and refresh parameters. - -Change-Id: Id2ea339d2c9ea8b56c71d6e88ec76949653ff5c2 -Signed-off-by: Angel Pons ---- - .../haswell/native_raminit/lookup_timings.c | 102 ++++++++ - .../haswell/native_raminit/raminit_native.h | 14 ++ - .../haswell/native_raminit/reg_structs.h | 93 +++++++ - .../haswell/native_raminit/timings_refresh.c | 233 +++++++++++++++++- - .../intel/haswell/registers/mchbar.h | 12 + - 5 files changed, 452 insertions(+), 2 deletions(-) - -diff --git a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c -index 8b81c7c341..b8d6c1ef40 100644 ---- a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c -+++ b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c -@@ -60,3 +60,105 @@ uint32_t get_tXP(const uint32_t mem_clock_mhz) - }; - return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); - } -+ -+static uint32_t get_lpddr_tCKE(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 533, 4 }, -+ { 666, 5 }, -+ { fmax, 6 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -+ -+static uint32_t get_ddr_tCKE(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 533, 3 }, -+ { 800, 4 }, -+ { 933, 5 }, -+ { 1200, 6 }, -+ { fmax, 7 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -+ -+uint32_t get_tCKE(const uint32_t mem_clock_mhz, const bool lpddr) -+{ -+ return lpddr ? get_lpddr_tCKE(mem_clock_mhz) : get_ddr_tCKE(mem_clock_mhz); -+} -+ -+uint32_t get_tXPDLL(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 400, 10 }, -+ { 533, 13 }, -+ { 666, 16 }, -+ { 800, 20 }, -+ { 933, 23 }, -+ { 1066, 26 }, -+ { 1200, 29 }, -+ { fmax, 32 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -+ -+uint32_t get_tAONPD(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 400, 4 }, -+ { 533, 5 }, -+ { 666, 6 }, -+ { 800, 7 }, /* SNB had 8 */ -+ { 933, 8 }, -+ { 1066, 10 }, -+ { 1200, 11 }, -+ { fmax, 12 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -+ -+uint32_t get_tMOD(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 800, 12 }, -+ { 933, 14 }, -+ { 1066, 16 }, -+ { 1200, 18 }, -+ { fmax, 20 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -+ -+uint32_t get_tXS_offset(const uint32_t mem_clock_mhz) -+{ -+ return DIV_ROUND_UP(mem_clock_mhz, 100); -+} -+ -+static uint32_t get_lpddr_tZQOPER(const uint32_t mem_clock_mhz) -+{ -+ return (mem_clock_mhz * 360) / 1000; -+} -+ -+static uint32_t get_ddr_tZQOPER(const uint32_t mem_clock_mhz) -+{ -+ const struct timing_lookup lut[] = { -+ { 800, 256 }, -+ { 933, 299 }, -+ { 1066, 342 }, -+ { 1200, 384 }, -+ { fmax, 427 }, -+ }; -+ return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut)); -+} -+ -+/* tZQOPER defines the period required for ZQCL after SR exit */ -+uint32_t get_tZQOPER(const uint32_t mem_clock_mhz, const bool lpddr) -+{ -+ return lpddr ? get_lpddr_tZQOPER(mem_clock_mhz) : get_ddr_tZQOPER(mem_clock_mhz); -+} -+ -+uint32_t get_tZQCS(const uint32_t mem_clock_mhz, const bool lpddr) -+{ -+ return DIV_ROUND_UP(get_tZQOPER(mem_clock_mhz, lpddr), 4); -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index fffa6d5450..5915a2bab0 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -156,6 +156,12 @@ struct sysinfo { - uint8_t cke_cmd_pi_code[NUM_CHANNELS][NUM_GROUPS]; - uint8_t cmd_north_pi_code[NUM_CHANNELS][NUM_GROUPS]; - uint8_t cmd_south_pi_code[NUM_CHANNELS][NUM_GROUPS]; -+ -+ union tc_bank_reg tc_bank[NUM_CHANNELS]; -+ union tc_bank_rank_a_reg tc_bankrank_a[NUM_CHANNELS]; -+ union tc_bank_rank_b_reg tc_bankrank_b[NUM_CHANNELS]; -+ union tc_bank_rank_c_reg tc_bankrank_c[NUM_CHANNELS]; -+ union tc_bank_rank_d_reg tc_bankrank_d[NUM_CHANNELS]; - }; - - static inline bool is_hsw_ult(void) -@@ -201,6 +207,14 @@ enum raminit_status configure_mc(struct sysinfo *ctrl); - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); - -+uint32_t get_tCKE(uint32_t mem_clock_mhz, bool lpddr); -+uint32_t get_tXPDLL(uint32_t mem_clock_mhz); -+uint32_t get_tAONPD(uint32_t mem_clock_mhz); -+uint32_t get_tMOD(uint32_t mem_clock_mhz); -+uint32_t get_tXS_offset(uint32_t mem_clock_mhz); -+uint32_t get_tZQOPER(uint32_t mem_clock_mhz, bool lpddr); -+uint32_t get_tZQCS(uint32_t mem_clock_mhz, bool lpddr); -+ - enum raminit_status wait_for_first_rcomp(void); - - uint8_t get_rx_bias(const struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index d11cda4b3d..70487e1640 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -335,6 +335,99 @@ union mcscheds_cbit_reg { - uint32_t raw; - }; - -+union tc_bank_reg { -+ struct __packed { -+ uint32_t tRCD : 5; // Bits 4:0 -+ uint32_t tRP : 5; // Bits 9:5 -+ uint32_t tRAS : 6; // Bits 15:10 -+ uint32_t tRDPRE : 4; // Bits 19:16 -+ uint32_t tWRPRE : 6; // Bits 25:20 -+ uint32_t tRRD : 4; // Bits 29:26 -+ uint32_t tRPab_ext : 2; // Bits 31:30 -+ }; -+ uint32_t raw; -+}; -+ -+union tc_bank_rank_a_reg { -+ struct __packed { -+ uint32_t tCKE : 4; // Bits 3:0 -+ uint32_t tFAW : 8; // Bits 11:4 -+ uint32_t tRDRD_sr : 3; // Bits 14:12 -+ uint32_t tRDRD_dr : 4; // Bits 18:15 -+ uint32_t tRDRD_dd : 4; // Bits 22:19 -+ uint32_t tRDPDEN : 5; // Bits 27:23 -+ uint32_t : 1; // Bits 28:28 -+ uint32_t cmd_3st_dis : 1; // Bits 29:29 -+ uint32_t cmd_stretch : 2; // Bits 31:30 -+ }; -+ uint32_t raw; -+}; -+ -+union tc_bank_rank_b_reg { -+ struct __packed { -+ uint32_t tWRRD_sr : 6; // Bits 5:0 -+ uint32_t tWRRD_dr : 4; // Bits 9:6 -+ uint32_t tWRRD_dd : 4; // Bits 13:10 -+ uint32_t tWRWR_sr : 3; // Bits 16:14 -+ uint32_t tWRWR_dr : 4; // Bits 20:17 -+ uint32_t tWRWR_dd : 4; // Bits 24:21 -+ uint32_t tWRPDEN : 6; // Bits 30:25 -+ uint32_t dec_wrd : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union tc_bank_rank_c_reg { -+ struct __packed { -+ uint32_t tXPDLL : 6; // Bits 5:0 -+ uint32_t tXP : 4; // Bits 9:6 -+ uint32_t tAONPD : 4; // Bits 13:10 -+ uint32_t tRDWR_sr : 5; // Bits 18:14 -+ uint32_t tRDWR_dr : 5; // Bits 23:19 -+ uint32_t tRDWR_dd : 5; // Bits 28:24 -+ uint32_t : 3; // Bits 31:29 -+ }; -+ uint32_t raw; -+}; -+ -+/* NOTE: Non-ULT only implements the lower 21 bits (odt_write_delay is 2 bits) */ -+union tc_bank_rank_d_reg { -+ struct __packed { -+ uint32_t tAA : 5; // Bits 4:0 -+ uint32_t tCWL : 5; // Bits 9:5 -+ uint32_t tCPDED : 2; // Bits 11:10 -+ uint32_t tPRPDEN : 2; // Bits 13:12 -+ uint32_t odt_read_delay : 3; // Bits 16:14 -+ uint32_t odt_read_duration : 2; // Bits 18:17 -+ uint32_t odt_write_duration : 3; // Bits 21:19 -+ uint32_t odt_write_delay : 3; // Bits 24:22 -+ uint32_t odt_always_rank_0 : 1; // Bits 25:25 -+ uint32_t cmd_delay : 2; // Bits 27:26 -+ uint32_t : 4; // Bits 31:28 -+ }; -+ uint32_t raw; -+}; -+ -+union tc_rftp_reg { -+ struct __packed { -+ uint32_t tREFI : 16; // Bits 15:0 -+ uint32_t tRFC : 9; // Bits 24:16 -+ uint32_t tREFIx9 : 7; // Bits 31:25 -+ }; -+ uint32_t raw; -+}; -+ -+union tc_srftp_reg { -+ struct __packed { -+ uint32_t tXSDLL : 12; // Bits 11:0 -+ uint32_t tXS_offset : 4; // Bits 15:12 -+ uint32_t tZQOPER : 10; // Bits 25:16 -+ uint32_t : 2; // Bits 27:26 -+ uint32_t tMOD : 4; // Bits 31:28 -+ }; -+ uint32_t raw; -+}; -+ - union mcmain_command_rate_limit_reg { - struct __packed { - uint32_t enable_cmd_limit : 1; // Bits 0:0 -diff --git a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c -index a9d960f31b..54fee0121d 100644 ---- a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c -+++ b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c -@@ -1,13 +1,242 @@ - /* SPDX-License-Identifier: GPL-2.0-or-later */ - -+#include -+#include -+#include -+#include -+#include -+#include -+ - #include "raminit_native.h" - -+#define BL 8 /* Burst length */ -+#define tCCD 4 -+#define tRPRE 1 -+#define tWPRE 1 -+#define tDLLK 512 -+ -+static bool is_sodimm(const enum spd_dimm_type_ddr3 type) -+{ -+ return type == SPD_DDR3_DIMM_TYPE_SO_DIMM || type == SPD_DDR3_DIMM_TYPE_72B_SO_UDIMM; -+} -+ -+static uint8_t get_odt_stretch(const struct sysinfo *const ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ /* Only stretch with 2 DIMMs per channel */ -+ if (ctrl->dpc[channel] != 2) -+ continue; -+ -+ const struct raminit_dimm_info *dimms = ctrl->dimms[channel]; -+ -+ /* Only stretch when using SO-DIMMs */ -+ if (!is_sodimm(dimms[0].data.dimm_type) || !is_sodimm(dimms[1].data.dimm_type)) -+ continue; -+ -+ /* Only stretch with mismatched card types */ -+ if (dimms[0].data.reference_card == dimms[1].data.reference_card) -+ continue; -+ -+ /* Stretch if one SO-DIMM is card F */ -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { -+ if (dimms[slot].data.reference_card == 5) -+ return 1; -+ } -+ } -+ return 0; -+} -+ -+static union tc_bank_reg make_tc_bank(struct sysinfo *const ctrl) -+{ -+ return (union tc_bank_reg) { -+ .tRCD = ctrl->tRCD, -+ .tRP = ctrl->tRP, -+ .tRAS = ctrl->tRAS, -+ .tRDPRE = ctrl->tRTP, -+ .tWRPRE = 4 + ctrl->tCWL + ctrl->tWR, -+ .tRRD = ctrl->tRRD, -+ .tRPab_ext = 0, /** TODO: For LPDDR, this is ctrl->tRPab - ctrl->tRP **/ -+ }; -+} -+ -+static union tc_bank_rank_a_reg make_tc_bankrank_a(struct sysinfo *ctrl, uint8_t odt_stretch) -+{ -+ /* Use 3N mode for DDR during training, but always use 1N mode for LPDDR */ -+ const uint32_t tCMD = ctrl->lpddr ? 0 : 3; -+ const uint32_t tRDRD_drdd = BL / 2 + 1 + tRPRE + odt_stretch + !!ctrl->lpddr; -+ -+ return (union tc_bank_rank_a_reg) { -+ .tCKE = get_tCKE(ctrl->mem_clock_mhz, ctrl->lpddr), -+ .tFAW = ctrl->tFAW, -+ .tRDRD_sr = tCCD, -+ .tRDRD_dr = tRDRD_drdd, -+ .tRDRD_dd = tRDRD_drdd, -+ .tRDPDEN = ctrl->tAA + BL / 2 + 1, -+ .cmd_3st_dis = 1, /* Disable command tri-state before training */ -+ .cmd_stretch = tCMD, -+ }; -+} -+ -+static union tc_bank_rank_b_reg make_tc_bankrank_b(struct sysinfo *const ctrl) -+{ -+ const uint8_t tWRRD_drdd = ctrl->tCWL - ctrl->tAA + BL / 2 + 2 + tRPRE; -+ const uint8_t tWRWR_drdd = BL / 2 + 2 + tWPRE; -+ -+ return (union tc_bank_rank_b_reg) { -+ .tWRRD_sr = tCCD + ctrl->tCWL + ctrl->tWTR + 2, -+ .tWRRD_dr = ctrl->lpddr ? 8 : tWRRD_drdd, -+ .tWRRD_dd = ctrl->lpddr ? 8 : tWRRD_drdd, -+ .tWRWR_sr = tCCD, -+ .tWRWR_dr = tWRWR_drdd, -+ .tWRWR_dd = tWRWR_drdd, -+ .tWRPDEN = ctrl->tWR + ctrl->tCWL + BL / 2, -+ .dec_wrd = ctrl->tCWL >= 6, -+ }; -+} -+ -+static uint32_t get_tRDWR_sr(const struct sysinfo *ctrl) -+{ -+ if (ctrl->lpddr) { -+ const uint32_t tdqsck_max = DIV_ROUND_UP(5500, ctrl->qclkps * 2); -+ return ctrl->tAA - ctrl->tCWL + tCCD + tWPRE + tdqsck_max + 1; -+ } else { -+ const bool fast_clock = ctrl->mem_clock_mhz > 666; -+ return ctrl->tAA - ctrl->tCWL + tCCD + tWPRE + 2 + fast_clock; -+ } -+} -+ -+static union tc_bank_rank_c_reg make_tc_bankrank_c(struct sysinfo *ctrl, uint8_t odt_stretch) -+{ -+ const uint32_t tRDWR_sr = get_tRDWR_sr(ctrl); -+ const uint32_t tRDWR_drdd = tRDWR_sr + odt_stretch; -+ -+ return (union tc_bank_rank_c_reg) { -+ .tXPDLL = get_tXPDLL(ctrl->mem_clock_mhz), -+ .tXP = MAX(ctrl->tXP, 7), /* Use a higher tXP for training */ -+ .tAONPD = get_tAONPD(ctrl->mem_clock_mhz), -+ .tRDWR_sr = tRDWR_sr, -+ .tRDWR_dr = tRDWR_drdd, -+ .tRDWR_dd = tRDWR_drdd, -+ }; -+} -+ -+static union tc_bank_rank_d_reg make_tc_bankrank_d(struct sysinfo *ctrl, uint8_t odt_stretch) -+{ -+ const uint32_t odt_rd_delay = ctrl->tAA - ctrl->tCWL; -+ if (!ctrl->lpddr) { -+ return (union tc_bank_rank_d_reg) { -+ .tAA = ctrl->tAA, -+ .tCWL = ctrl->tCWL, -+ .tCPDED = 1, -+ .tPRPDEN = 1, -+ .odt_read_delay = odt_rd_delay, -+ .odt_read_duration = odt_stretch, -+ }; -+ } -+ -+ /* tCWL has 1 extra clock because of tDQSS, subtract it here */ -+ const uint32_t tCWL_lpddr = ctrl->tCWL - 1; -+ const uint32_t odt_wr_delay = tCWL_lpddr + DIV_ROUND_UP(3500, ctrl->qclkps * 2); -+ const uint32_t odt_wr_duration = DIV_ROUND_UP(3500 - 1750, ctrl->qclkps * 2) + 1; -+ -+ return (union tc_bank_rank_d_reg) { -+ .tAA = ctrl->tAA, -+ .tCWL = tCWL_lpddr, -+ .tCPDED = 2, /* Required by JEDEC LPDDR3 spec */ -+ .tPRPDEN = 1, -+ .odt_read_delay = odt_rd_delay, -+ .odt_read_duration = odt_stretch, -+ .odt_write_delay = odt_wr_delay, -+ .odt_write_duration = odt_wr_duration, -+ .odt_always_rank_0 = ctrl->lpddr_dram_odt -+ }; -+} -+ -+/* ZQCS period values, in (tREFI * 128) units */ -+#define ZQCS_PERIOD_DDR3 128 /* tREFI * 128 = 7.8 us * 128 = 1ms */ -+#define ZQCS_PERIOD_LPDDR3 256 /* tREFI * 128 = 3.9 us * 128 = 0.5ms */ -+ -+static uint32_t make_tc_zqcal(const struct sysinfo *const ctrl) -+{ -+ const uint32_t zqcs_period = ctrl->lpddr ? ZQCS_PERIOD_LPDDR3 : ZQCS_PERIOD_DDR3; -+ const uint32_t tZQCS = get_tZQCS(ctrl->mem_clock_mhz, ctrl->lpddr); -+ return tZQCS << (is_hsw_ult() ? 10 : 8) | zqcs_period; -+} -+ -+static union tc_rftp_reg make_tc_rftp(const struct sysinfo *const ctrl) -+{ -+ /* -+ * The tREFIx9 field should be programmed to minimum of 8.9 * tREFI (to allow -+ * for possible delays from ZQ or isoc) and tRASmax (70us) divided by 1024. -+ */ -+ return (union tc_rftp_reg) { -+ .tREFI = ctrl->tREFI, -+ .tRFC = ctrl->tRFC, -+ .tREFIx9 = ctrl->tREFI * 89 / 10240, -+ }; -+} -+ -+static union tc_srftp_reg make_tc_srftp(const struct sysinfo *const ctrl) -+{ -+ return (union tc_srftp_reg) { -+ .tXSDLL = tDLLK, -+ .tXS_offset = get_tXS_offset(ctrl->mem_clock_mhz), -+ .tZQOPER = get_tZQOPER(ctrl->mem_clock_mhz, ctrl->lpddr), -+ .tMOD = get_tMOD(ctrl->mem_clock_mhz) - 8, -+ }; -+} -+ - void configure_timings(struct sysinfo *ctrl) - { -- /** TODO: Stub **/ -+ if (ctrl->lpddr) -+ die("%s: Missing support for LPDDR\n", __func__); -+ -+ const uint8_t odt_stretch = get_odt_stretch(ctrl); -+ const union tc_bank_reg tc_bank = make_tc_bank(ctrl); -+ const union tc_bank_rank_a_reg tc_bank_rank_a = make_tc_bankrank_a(ctrl, odt_stretch); -+ const union tc_bank_rank_b_reg tc_bank_rank_b = make_tc_bankrank_b(ctrl); -+ const union tc_bank_rank_c_reg tc_bank_rank_c = make_tc_bankrank_c(ctrl, odt_stretch); -+ const union tc_bank_rank_d_reg tc_bank_rank_d = make_tc_bankrank_d(ctrl, odt_stretch); -+ -+ const uint8_t wr_delay = tc_bank_rank_b.dec_wrd + 1; -+ uint8_t sc_wr_add_delay = 0; -+ sc_wr_add_delay |= wr_delay << 0; -+ sc_wr_add_delay |= wr_delay << 2; -+ sc_wr_add_delay |= wr_delay << 4; -+ sc_wr_add_delay |= wr_delay << 6; -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ ctrl->tc_bank[channel] = tc_bank; -+ ctrl->tc_bankrank_a[channel] = tc_bank_rank_a; -+ ctrl->tc_bankrank_b[channel] = tc_bank_rank_b; -+ ctrl->tc_bankrank_c[channel] = tc_bank_rank_c; -+ ctrl->tc_bankrank_d[channel] = tc_bank_rank_d; -+ -+ mchbar_write32(TC_BANK_ch(channel), ctrl->tc_bank[channel].raw); -+ mchbar_write32(TC_BANK_RANK_A_ch(channel), ctrl->tc_bankrank_a[channel].raw); -+ mchbar_write32(TC_BANK_RANK_B_ch(channel), ctrl->tc_bankrank_b[channel].raw); -+ mchbar_write32(TC_BANK_RANK_C_ch(channel), ctrl->tc_bankrank_c[channel].raw); -+ mchbar_write32(TC_BANK_RANK_D_ch(channel), ctrl->tc_bankrank_d[channel].raw); -+ mchbar_write8(SC_WR_ADD_DELAY_ch(channel), sc_wr_add_delay); -+ } - } - - void configure_refresh(struct sysinfo *ctrl) - { -- /** TODO: Stub **/ -+ const union tc_srftp_reg tc_srftp = make_tc_srftp(ctrl); -+ const union tc_rftp_reg tc_rftp = make_tc_rftp(ctrl); -+ const uint32_t tc_zqcal = make_tc_zqcal(ctrl); -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ mchbar_setbits32(TC_RFP_ch(channel), 0xff); -+ mchbar_write32(TC_RFTP_ch(channel), tc_rftp.raw); -+ mchbar_write32(TC_SRFTP_ch(channel), tc_srftp.raw); -+ mchbar_write32(TC_ZQCAL_ch(channel), tc_zqcal); -+ } - } -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 4c3f399b5d..2acc5cbbc8 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -86,9 +86,21 @@ - #define DDR_COMP_VSSHI_CONTROL 0x3a24 - - /* MCMAIN per-channel */ -+#define TC_BANK_ch(ch) _MCMAIN_C(0x4000, ch) -+#define TC_BANK_RANK_A_ch(ch) _MCMAIN_C(0x4004, ch) -+#define TC_BANK_RANK_B_ch(ch) _MCMAIN_C(0x4008, ch) -+#define TC_BANK_RANK_C_ch(ch) _MCMAIN_C(0x400c, ch) - #define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch) -+#define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) -+#define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) - -+#define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) -+ -+#define TC_ZQCAL_ch(ch) _MCMAIN_C(0x4290, ch) -+#define TC_RFP_ch(ch) _MCMAIN_C(0x4294, ch) -+#define TC_RFTP_ch(ch) _MCMAIN_C(0x4298, ch) - #define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) -+#define TC_SRFTP_ch(ch) _MCMAIN_C(0x42a4, ch) - - /* MCMAIN broadcast */ - #define MCSCHEDS_CBIT 0x4c20 --- -2.39.5 - diff --git a/config/coreboot/default/patches/0046-haswell-NRI-Do-sense-amplifier-offset-training.patch b/config/coreboot/default/patches/0046-haswell-NRI-Do-sense-amplifier-offset-training.patch new file mode 100644 index 00000000..c0945df9 --- /dev/null +++ b/config/coreboot/default/patches/0046-haswell-NRI-Do-sense-amplifier-offset-training.patch @@ -0,0 +1,476 @@ +From 02aa0c5612388e35f5dd1ff9c5f7a7b5b48fb9c0 Mon Sep 17 00:00:00 2001 +From: Angel Pons +Date: Wed, 17 Apr 2024 13:20:32 +0200 +Subject: [PATCH 46/51] haswell NRI: Do sense amplifier offset training + +Quoting Wikipedia: + + A sense amplifier is a circuit that is used to amplify and detect + small signals in electronic systems. It is commonly used in memory + circuits, such as dynamic random access memory (DRAM), to read and + amplify the weak signals stored in memory cells. + +In this case, we're calibrating the sense amplifiers in the memory +controller. This training procedure uses a magic "sense amp offset +cancel" mode of the DDRIO to observe the sampled logic levels, and +sweeps Vref to find the low-high transition for each bit lane. The +procedure consists of two stages: the first stage centers per-byte +Vref (to ensure per-bit Vref offsets are as small as possible) and +the second stage centers per-bit Vref. + +Because this procedure uses the "sense amp offset cancel" mode, it +does not rely on DRAM being trained. It is assumed that the memory +controller simply makes sense amp output levels observable via the +`DDR_DATA_TRAIN_FEEDBACK` register and that the memory bus is idle +during this training step (so the lane voltage is Vdd / 2). + +Note: This procedure will need to be adapted for Broadwell because +it has per-rank per-bit RxVref registers, whereas Haswell only has +a single per-bit RxVref register for all ranks. + +Change-Id: Ia07db68763f90e9701c8a376e01279ada8dbbe07 +Signed-off-by: Angel Pons +--- + .../intel/haswell/native_raminit/Makefile.mk | 1 + + .../haswell/native_raminit/raminit_main.c | 1 + + .../haswell/native_raminit/raminit_native.h | 12 + + .../native_raminit/train_sense_amp_offset.c | 341 ++++++++++++++++++ + .../intel/haswell/registers/mchbar.h | 2 + + 5 files changed, 357 insertions(+) + create mode 100644 src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c + +diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +index 8fdd17c542..4bd668a2d6 100644 +--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk ++++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk +@@ -21,3 +21,4 @@ romstage-y += timings_refresh.c + romstage-y += train_jedec_write_leveling.c + romstage-y += train_read_mpr.c + romstage-y += train_receive_enable.c ++romstage-y += train_sense_amp_offset.c +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +index 056dde1adc..ce637e2d03 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c +@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = { + { configure_memory_map, true, "MEMMAP", }, + { do_jedec_init, true, "JEDECINIT", }, + { pre_training, true, "PRETRAIN", }, ++ { train_sense_amp_offset, true, "SOT", }, + { train_receive_enable, true, "RCVET", }, + { train_read_mpr, true, "RDMPRT", }, + { train_jedec_write_leveling, true, "JWRL", }, +diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +index 2ac16eaad3..07eea98831 100644 +--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h ++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h +@@ -23,6 +23,8 @@ + #define NUM_LANES 9 + #define NUM_LANES_NO_ECC 8 + ++#define NUM_BITS 8 ++ + #define COMP_INT 10 + + /* Always use 12 legs for emphasis (not trained) */ +@@ -219,6 +221,7 @@ enum raminit_status { + RAMINIT_STATUS_MPLL_INIT_FAILURE, + RAMINIT_STATUS_POLL_TIMEOUT, + RAMINIT_STATUS_REUT_ERROR, ++ RAMINIT_STATUS_SAMP_OFFSET_FAILURE, + RAMINIT_STATUS_RCVEN_FAILURE, + RAMINIT_STATUS_RMPR_FAILURE, + RAMINIT_STATUS_JWRL_FAILURE, +@@ -244,6 +247,12 @@ struct raminit_dimm_info { + bool valid; + }; + ++struct vref_margin { ++ uint8_t low; ++ uint8_t center; ++ uint8_t high; ++}; ++ + struct sysinfo { + enum raminit_boot_mode bootmode; + enum generic_stepping stepping; +@@ -331,6 +340,8 @@ struct sysinfo { + uint8_t rxdqsn[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; + int8_t rxvref[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; + ++ struct vref_margin rxdqvrefpb[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES][NUM_BITS]; ++ + uint8_t clk_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; + uint8_t ctl_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; + uint8_t cke_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; +@@ -453,6 +464,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl); + enum raminit_status configure_mc(struct sysinfo *ctrl); + enum raminit_status configure_memory_map(struct sysinfo *ctrl); + enum raminit_status do_jedec_init(struct sysinfo *ctrl); ++enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl); + enum raminit_status train_receive_enable(struct sysinfo *ctrl); + enum raminit_status train_read_mpr(struct sysinfo *ctrl); + enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); +diff --git a/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c +new file mode 100644 +index 0000000000..d4f199fefb +--- /dev/null ++++ b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c +@@ -0,0 +1,341 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "raminit_native.h" ++ ++#define VREF_OFFSET_PLOT RAM_DEBUG ++#define SAMP_OFFSET_PLOT RAM_DEBUG ++ ++struct vref_train_data { ++ int8_t best_sum; ++ int8_t best_vref; ++ int8_t sum_bits; ++ uint8_t high_mask; ++ uint8_t low_mask; ++}; ++ ++static enum raminit_status train_vref_offset(struct sysinfo *ctrl) ++{ ++ const int8_t vref_start = -15; ++ const int8_t vref_stop = 15; ++ const struct vref_train_data initial_vref_values = { ++ .best_sum = -NUM_LANES, ++ .best_vref = 0, ++ .high_mask = 0, ++ .low_mask = 0xff, ++ }; ++ struct vref_train_data vref_data[NUM_CHANNELS][NUM_LANES]; ++ ++ printk(VREF_OFFSET_PLOT, "Plot of sum_bits across Vref settings\nChannel"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ printk(VREF_OFFSET_PLOT, "\t%u\t\t", channel); ++ } ++ ++ printk(VREF_OFFSET_PLOT, "\nByte"); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ printk(VREF_OFFSET_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ printk(VREF_OFFSET_PLOT, "%u ", byte); ++ vref_data[channel][byte] = initial_vref_values; ++ union ddr_data_control_2_reg data_control_2 = { ++ .raw = ctrl->dq_control_2[channel][byte], ++ }; ++ data_control_2.force_bias_on = 1; ++ data_control_2.force_rx_on = 1; ++ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); ++ } ++ } ++ ++ /* Sweep through Vref settings and find point SampOffset of +/- 7 passes */ ++ printk(VREF_OFFSET_PLOT, "\n1/2 Vref"); ++ for (int8_t vref = vref_start; vref <= vref_stop; vref++) { ++ printk(VREF_OFFSET_PLOT, "\n% 3d", vref); ++ ++ /* ++ * To perform this test, enable offset cancel mode and enable ODT. ++ * Check results and update variables. Ideal result is all zeroes. ++ * Clear offset cancel mode at end of test to write RX_OFFSET_VDQ. ++ */ ++ change_1d_margin_multicast(ctrl, RdV, vref, 0, false, REG_FILE_USE_RANK); ++ ++ /* Program settings for Vref and SampOffset = 7 (8 + 7) */ ++ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0xffffffff); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* Propagate delay values (without a read command) */ ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.read_rf_rd = 1; ++ data_control_0.read_rf_wr = 0; ++ data_control_0.read_rf_rank = 0; ++ data_control_0.force_odt_on = 1; ++ data_control_0.samp_train_mode = 1; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ udelay(1); ++ data_control_0.samp_train_mode = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const uint8_t feedback = get_data_train_feedback(channel, byte); ++ struct vref_train_data *curr_data = &vref_data[channel][byte]; ++ curr_data->low_mask &= feedback; ++ curr_data->sum_bits = -popcnt(feedback); ++ } ++ } ++ ++ /* Program settings for Vref and SampOffset = -7 (8 - 7) */ ++ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0x11111111); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* Propagate delay values (without a read command) */ ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.read_rf_rd = 1; ++ data_control_0.read_rf_wr = 0; ++ data_control_0.read_rf_rank = 0; ++ data_control_0.force_odt_on = 1; ++ data_control_0.samp_train_mode = 1; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ udelay(1); ++ data_control_0.samp_train_mode = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ printk(VREF_OFFSET_PLOT, "\t"); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const uint8_t feedback = get_data_train_feedback(channel, byte); ++ struct vref_train_data *curr_data = &vref_data[channel][byte]; ++ curr_data->high_mask |= feedback; ++ curr_data->sum_bits += popcnt(feedback); ++ printk(VREF_OFFSET_PLOT, "%d ", curr_data->sum_bits); ++ if (curr_data->sum_bits > curr_data->best_sum) { ++ curr_data->best_sum = curr_data->sum_bits; ++ curr_data->best_vref = vref; ++ ctrl->rxvref[channel][0][byte] = vref; ++ } else if (curr_data->sum_bits == curr_data->best_sum) { ++ curr_data->best_vref = vref; ++ } ++ } ++ } ++ } ++ printk(BIOS_DEBUG, "\n\nHi-Lo (XOR):"); ++ enum raminit_status status = RAMINIT_STATUS_SUCCESS; ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "\n C%u:", channel); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ struct vref_train_data *const curr_data = &vref_data[channel][byte]; ++ const uint8_t bit_xor = curr_data->high_mask ^ curr_data->low_mask; ++ printk(BIOS_DEBUG, "\t0x%02x", bit_xor); ++ if (bit_xor == 0xff) ++ continue; ++ ++ /* Report an error if any bit did not change */ ++ status = RAMINIT_STATUS_SAMP_OFFSET_FAILURE; ++ } ++ } ++ if (status) ++ printk(BIOS_ERR, "\nUnexpected bit error in Vref offset training\n"); ++ ++ printk(BIOS_DEBUG, "\n\nRdVref:"); ++ change_1d_margin_multicast(ctrl, RdV, 0, 0, false, REG_FILE_USE_RANK); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "\n C%u:", channel); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ struct vref_train_data *const curr_data = &vref_data[channel][byte]; ++ const int8_t vref_width = ++ curr_data->best_vref - ctrl->rxvref[channel][0][byte]; ++ ++ /* ++ * Step size for Rx Vref in DATA_OFFSET_TRAIN is about 3.9 mV ++ * whereas Rx Vref step size in RX_TRAIN_RANK is about 7.8 mV ++ */ ++ int8_t vref = ctrl->rxvref[channel][0][byte] + vref_width / 2; ++ if (vref < 0) ++ vref--; ++ else ++ vref++; ++ ++ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { ++ if (!rank_in_ch(ctrl, rank, channel)) ++ continue; ++ ++ ctrl->rxvref[channel][rank][byte] = vref / 2; ++ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); ++ } ++ printk(BIOS_DEBUG, "\t% 4d", ctrl->rxvref[channel][0][byte]); ++ } ++ } ++ printk(BIOS_DEBUG, "\n\n"); ++ return status; ++} ++ ++/** ++ * LPDDR has an additional bit for DQS per each byte. ++ * ++ * TODO: The DQS value must be written into Data Control 2. ++ */ ++#define NUM_OFFSET_TRAIN_BITS (NUM_BITS + 1) ++ ++#define PLOT_CH_SPACE " " ++ ++struct samp_train_data { ++ uint8_t first_zero; ++ uint8_t last_one; ++}; ++ ++static void train_samp_offset(struct sysinfo *ctrl) ++{ ++ const uint8_t max_train_bits = ctrl->lpddr ? NUM_OFFSET_TRAIN_BITS : NUM_BITS; ++ ++ struct samp_train_data samp_data[NUM_CHANNELS][NUM_LANES][NUM_OFFSET_TRAIN_BITS] = {0}; ++ ++ printk(BIOS_DEBUG, "Channel "); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ printk(BIOS_DEBUG, "%u ", channel); /* Same length as PLOT_CH_SPACE */ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(BIOS_DEBUG, " %s ", ctrl->lpddr ? " " : ""); ++ } ++ printk(BIOS_DEBUG, "\nByte "); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(BIOS_DEBUG, "%u %s ", byte, ctrl->lpddr ? " " : ""); ++ ++ printk(BIOS_DEBUG, PLOT_CH_SPACE); ++ } ++ printk(SAMP_OFFSET_PLOT, "\nBits "); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ printk(SAMP_OFFSET_PLOT, "01234567%s ", ctrl->lpddr ? "S" : ""); ++ ++ printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE); ++ } ++ printk(SAMP_OFFSET_PLOT, "\n SAmp\n"); ++ for (uint8_t samp_offset = 1; samp_offset <= 15; samp_offset++) { ++ printk(SAMP_OFFSET_PLOT, "% 5d\t", samp_offset); ++ ++ uint32_t rx_offset_vdq = 0; ++ for (uint8_t bit = 0; bit < NUM_BITS; bit++) { ++ rx_offset_vdq += samp_offset << (4 * bit); ++ } ++ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, rx_offset_vdq); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ /* Propagate delay values (without a read command) */ ++ union ddr_data_control_0_reg data_control_0 = { ++ .raw = ctrl->dq_control_0[channel], ++ }; ++ data_control_0.read_rf_rd = 1; ++ data_control_0.read_rf_wr = 0; ++ data_control_0.read_rf_rank = 0; ++ data_control_0.force_odt_on = 1; ++ data_control_0.samp_train_mode = 1; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ udelay(1); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ const uint32_t feedback = ++ get_data_train_feedback(channel, byte); ++ ++ for (uint8_t bit = 0; bit < max_train_bits; bit++) { ++ struct samp_train_data *const curr_data = ++ &samp_data[channel][byte][bit]; ++ const bool result = feedback & BIT(bit); ++ if (result) { ++ curr_data->last_one = samp_offset; ++ } else if (curr_data->first_zero == 0) { ++ curr_data->first_zero = samp_offset; ++ } ++ printk(SAMP_OFFSET_PLOT, result ? "." : "#"); ++ } ++ printk(SAMP_OFFSET_PLOT, " "); ++ } ++ printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE); ++ data_control_0.samp_train_mode = 0; ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); ++ } ++ printk(SAMP_OFFSET_PLOT, "\n"); ++ } ++ printk(BIOS_DEBUG, "\nBitSAmp "); ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { ++ uint32_t rx_offset_vdq = 0; ++ for (uint8_t bit = 0; bit < max_train_bits; bit++) { ++ struct samp_train_data *const curr_data = ++ &samp_data[channel][byte][bit]; ++ ++ uint8_t vref = curr_data->first_zero + curr_data->last_one; ++ vref = clamp_u8(0, vref / 2, 15); ++ /* ++ * Check for saturation conditions to make sure ++ * we are as close as possible to Vdd/2 (750 mV). ++ */ ++ if (curr_data->first_zero == 0) ++ vref = 15; ++ if (curr_data->last_one == 0) ++ vref = 0; ++ ++ ctrl->rxdqvrefpb[channel][0][byte][bit].center = vref; ++ rx_offset_vdq += vref & 0xf << (4 * bit); ++ printk(BIOS_DEBUG, "%x", vref); ++ } ++ mchbar_write32(RX_OFFSET_VDQ(channel, byte), rx_offset_vdq); ++ printk(BIOS_DEBUG, " "); ++ download_regfile(ctrl, channel, 1, 0, REG_FILE_USE_RANK, 0, 1, 0); ++ } ++ printk(BIOS_DEBUG, PLOT_CH_SPACE); ++ } ++ printk(BIOS_DEBUG, "\n"); ++} ++ ++enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl) ++{ ++ printk(BIOS_DEBUG, "Stage 1: Vref offset training\n"); ++ const enum raminit_status status = train_vref_offset(ctrl); ++ ++ printk(BIOS_DEBUG, "Stage 2: Samp offset training\n"); ++ train_samp_offset(ctrl); ++ ++ /* Clean up after test */ ++ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { ++ if (!does_ch_exist(ctrl, channel)) ++ continue; ++ ++ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); ++ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) ++ mchbar_write32(DQ_CONTROL_2(channel, byte), ++ ctrl->dq_control_2[channel][byte]); ++ } ++ io_reset(); ++ return status; ++} +diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h +index 49a215aa71..1a168a3fc8 100644 +--- a/src/northbridge/intel/haswell/registers/mchbar.h ++++ b/src/northbridge/intel/haswell/registers/mchbar.h +@@ -18,6 +18,8 @@ + #define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte) + #define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte) + ++#define RX_OFFSET_VDQ(ch, byte) _DDRIO_C_R_B(0x004c, ch, 0, byte) ++ + #define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) + + #define DQ_CONTROL_1(ch, byte) _DDRIO_C_R_B(0x0060, ch, 0, byte) +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0047-haswell-NRI-Program-memory-map.patch b/config/coreboot/default/patches/0047-haswell-NRI-Program-memory-map.patch deleted file mode 100644 index 58a2f556..00000000 --- a/config/coreboot/default/patches/0047-haswell-NRI-Program-memory-map.patch +++ /dev/null @@ -1,263 +0,0 @@ -From 70d7333e1e0c2b0ce0f2a7e4c4c3ac5c1aca2094 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sat, 7 May 2022 21:24:50 +0200 -Subject: [PATCH 47/65] haswell NRI: Program memory map - -This is very similar to Sandy/Ivy Bridge, except that there's several -registers to program in GDXCBAR. One of these GDXCBAR registers has a -lock bit that must be set in order for the memory controller to allow -normal access to DRAM. And it took me four months to realize this one -bit was the only reason why native raminit did not work. - -Change-Id: I3af73a018a7ba948701a542e661e7fefd57591fe -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../intel/haswell/native_raminit/memory_map.c | 183 ++++++++++++++++++ - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 1 + - .../intel/haswell/registers/host_bridge.h | 2 + - 5 files changed, 188 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/memory_map.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index fc55277a65..37d527e972 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -4,6 +4,7 @@ romstage-y += configure_mc.c - romstage-y += lookup_timings.c - romstage-y += init_mpll.c - romstage-y += io_comp_control.c -+romstage-y += memory_map.c - romstage-y += raminit_main.c - romstage-y += raminit_native.c - romstage-y += spd_bitmunching.c -diff --git a/src/northbridge/intel/haswell/native_raminit/memory_map.c b/src/northbridge/intel/haswell/native_raminit/memory_map.c -new file mode 100644 -index 0000000000..e3aded2b37 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/memory_map.c -@@ -0,0 +1,183 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+/* GDXCBAR */ -+#define MPCOHTRK_GDXC_MOT_ADDRESS_LO 0x10 -+#define MPCOHTRK_GDXC_MOT_ADDRESS_HI 0x14 -+#define MPCOHTRK_GDXC_MOT_REGION 0x18 -+ -+#define MPCOHTRK_GDXC_OCLA_ADDRESS_LO 0x20 -+#define MPCOHTRK_GDXC_OCLA_ADDRESS_HI 0x24 -+#define MPCOHTRK_GDXC_OCLA_REGION 0x28 -+ -+/* This lock bit made me lose what little sanity I had left. - Angel Pons */ -+#define MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK BIT(2) -+ -+static inline uint32_t gdxcbar_read32(const uintptr_t offset) -+{ -+ return read32p((mchbar_read32(GDXCBAR) & ~1) + offset); -+} -+ -+static inline void gdxcbar_write32(const uintptr_t offset, const uint32_t value) -+{ -+ write32p((mchbar_read32(GDXCBAR) & ~1) + offset, value); -+} -+ -+static inline void gdxcbar_clrsetbits32(const uintptr_t offset, uint32_t clear, uint32_t set) -+{ -+ const uintptr_t address = (mchbar_read32(GDXCBAR) & ~1) + offset; -+ clrsetbits32((void *)address, clear, set); -+} -+ -+#define gdxcbar_setbits32(offset, set) gdxcbar_clrsetbits32(offset, 0, set) -+#define gdxcbar_clrbits32(offset, clear) gdxcbar_clrsetbits32(offset, clear, 0) -+ -+/* All values stored in here (except the bool) are specified in MiB */ -+struct memory_map_data { -+ uint32_t dpr_size; -+ uint32_t tseg_size; -+ uint32_t gtt_size; -+ uint32_t gms_size; -+ uint32_t me_stolen_size; -+ uint32_t mmio_size; -+ uint32_t touud; -+ uint32_t remaplimit; -+ uint32_t remapbase; -+ uint32_t tom; -+ uint32_t tom_minus_me; -+ uint32_t tolud; -+ uint32_t bdsm_base; -+ uint32_t gtt_base; -+ uint32_t tseg_base; -+ bool reclaim_possible; -+}; -+ -+static void compute_memory_map(struct memory_map_data *map) -+{ -+ map->tom_minus_me = map->tom - map->me_stolen_size; -+ -+ /* -+ * MMIO size will actually be slightly smaller than computed, -+ * but matches what MRC does and is more MTRR-friendly given -+ * that TSEG is treated as WB, but SMRR makes TSEG UC anyway. -+ */ -+ const uint32_t mmio_size = MIN(map->tom_minus_me, 4096) / 2; -+ map->gtt_base = ALIGN_DOWN(mmio_size, map->tseg_size); -+ map->tseg_base = map->gtt_base - map->tseg_size; -+ map->bdsm_base = map->gtt_base + map->gtt_size; -+ map->tolud = map->bdsm_base + map->gms_size; -+ map->reclaim_possible = map->tom_minus_me > map->tolud; -+ -+ if (map->reclaim_possible) { -+ map->remapbase = MAX(4096, map->tom_minus_me); -+ map->touud = MIN(4096, map->tom_minus_me) + map->remapbase - map->tolud; -+ map->remaplimit = map->touud - 1; -+ } else { -+ map->remapbase = 0; -+ map->remaplimit = 0; -+ map->touud = map->tom_minus_me; -+ } -+} -+ -+static void display_memory_map(const struct memory_map_data *map) -+{ -+ if (!CONFIG(DEBUG_RAM_SETUP)) -+ return; -+ -+ printk(BIOS_DEBUG, "============ MEMORY MAP ============\n"); -+ printk(BIOS_DEBUG, "\n"); -+ printk(BIOS_DEBUG, "dpr_size = %u MiB\n", map->dpr_size); -+ printk(BIOS_DEBUG, "tseg_size = %u MiB\n", map->tseg_size); -+ printk(BIOS_DEBUG, "gtt_size = %u MiB\n", map->gtt_size); -+ printk(BIOS_DEBUG, "gms_size = %u MiB\n", map->gms_size); -+ printk(BIOS_DEBUG, "me_stolen_size = %u MiB\n", map->me_stolen_size); -+ printk(BIOS_DEBUG, "\n"); -+ printk(BIOS_DEBUG, "touud = %u MiB\n", map->touud); -+ printk(BIOS_DEBUG, "remaplimit = %u MiB\n", map->remaplimit); -+ printk(BIOS_DEBUG, "remapbase = %u MiB\n", map->remapbase); -+ printk(BIOS_DEBUG, "tom = %u MiB\n", map->tom); -+ printk(BIOS_DEBUG, "tom_minus_me = %u MiB\n", map->tom_minus_me); -+ printk(BIOS_DEBUG, "tolud = %u MiB\n", map->tolud); -+ printk(BIOS_DEBUG, "bdsm_base = %u MiB\n", map->bdsm_base); -+ printk(BIOS_DEBUG, "gtt_base = %u MiB\n", map->gtt_base); -+ printk(BIOS_DEBUG, "tseg_base = %u MiB\n", map->tseg_base); -+ printk(BIOS_DEBUG, "\n"); -+ printk(BIOS_DEBUG, "reclaim_possible = %s\n", map->reclaim_possible ? "Yes" : "No"); -+} -+ -+static void map_write_reg64(const uint16_t reg, const uint64_t size) -+{ -+ const uint64_t value = size << 20; -+ pci_write_config32(HOST_BRIDGE, reg + 4, value >> 32); -+ pci_write_config32(HOST_BRIDGE, reg + 0, value >> 0); -+} -+ -+static void map_write_reg32(const uint16_t reg, const uint32_t size) -+{ -+ const uint32_t value = size << 20; -+ pci_write_config32(HOST_BRIDGE, reg, value); -+} -+ -+static void program_memory_map(const struct memory_map_data *map) -+{ -+ map_write_reg64(TOUUD, map->touud); -+ map_write_reg64(TOM, map->tom); -+ if (map->reclaim_possible) { -+ map_write_reg64(REMAPBASE, map->remapbase); -+ map_write_reg64(REMAPLIMIT, map->remaplimit); -+ } -+ if (map->me_stolen_size) { -+ map_write_reg64(MESEG_LIMIT, 0x80000 - map->me_stolen_size); -+ map_write_reg64(MESEG_BASE, map->tom_minus_me); -+ pci_or_config32(HOST_BRIDGE, MESEG_LIMIT, ME_STLEN_EN); -+ } -+ map_write_reg32(TOLUD, map->tolud); -+ map_write_reg32(BDSM, map->bdsm_base); -+ map_write_reg32(BGSM, map->gtt_base); -+ map_write_reg32(TSEG, map->tseg_base); -+ -+ const uint32_t dpr_reg = map->tseg_base << 20 | map->dpr_size << 4; -+ pci_write_config32(HOST_BRIDGE, DPR, dpr_reg); -+ -+ const uint16_t gfx_stolen_size = GGC_IGD_MEM_IN_32MB_UNITS(map->gms_size / 32); -+ const uint16_t ggc = map->gtt_size << 8 | gfx_stolen_size; -+ pci_write_config16(HOST_BRIDGE, GGC, ggc); -+ -+ /** TODO: Do not hardcode these? GDXC has weird alignment requirements, though. **/ -+ gdxcbar_write32(MPCOHTRK_GDXC_MOT_ADDRESS_LO, 0); -+ gdxcbar_write32(MPCOHTRK_GDXC_MOT_ADDRESS_HI, 0); -+ gdxcbar_write32(MPCOHTRK_GDXC_MOT_REGION, 0); -+ -+ gdxcbar_write32(MPCOHTRK_GDXC_OCLA_ADDRESS_LO, 0); -+ gdxcbar_write32(MPCOHTRK_GDXC_OCLA_ADDRESS_HI, 0); -+ gdxcbar_write32(MPCOHTRK_GDXC_OCLA_REGION, 0); -+ -+ gdxcbar_setbits32(MPCOHTRK_GDXC_OCLA_ADDRESS_HI, MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK); -+} -+ -+enum raminit_status configure_memory_map(struct sysinfo *ctrl) -+{ -+ struct memory_map_data memory_map = { -+ .tom = ctrl->channel_size_mb[0] + ctrl->channel_size_mb[1], -+ .dpr_size = CONFIG_INTEL_TXT_DPR_SIZE, -+ .tseg_size = CONFIG_SMM_TSEG_SIZE >> 20, -+ .me_stolen_size = intel_early_me_uma_size(), -+ }; -+ /** FIXME: MRC hardcodes iGPU parameters, but we should not **/ -+ const bool igpu_on = pci_read_config32(HOST_BRIDGE, DEVEN) & DEVEN_D2EN; -+ if (CONFIG(ONBOARD_VGA_IS_PRIMARY) || igpu_on) { -+ memory_map.gtt_size = 2; -+ memory_map.gms_size = 64; -+ pci_or_config32(HOST_BRIDGE, DEVEN, DEVEN_D2EN); -+ } -+ compute_memory_map(&memory_map); -+ display_memory_map(&memory_map); -+ program_memory_map(&memory_map); -+ return 0; -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index fcc981ad04..559dfc3a4e 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -23,6 +23,7 @@ static const struct task_entry cold_boot[] = { - { initialise_mpll, true, "INITMPLL", }, - { convert_timings, true, "CONVTIM", }, - { configure_mc, true, "CONFMC", }, -+ { configure_memory_map, true, "MEMMAP", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 5915a2bab0..8f937c4ccd 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -203,6 +203,7 @@ enum raminit_status collect_spd_info(struct sysinfo *ctrl); - enum raminit_status initialise_mpll(struct sysinfo *ctrl); - enum raminit_status convert_timings(struct sysinfo *ctrl); - enum raminit_status configure_mc(struct sysinfo *ctrl); -+enum raminit_status configure_memory_map(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/registers/host_bridge.h b/src/northbridge/intel/haswell/registers/host_bridge.h -index 1ee0ab2890..0228cf6bb9 100644 ---- a/src/northbridge/intel/haswell/registers/host_bridge.h -+++ b/src/northbridge/intel/haswell/registers/host_bridge.h -@@ -34,6 +34,8 @@ - - #define MESEG_BASE 0x70 /* Management Engine Base */ - #define MESEG_LIMIT 0x78 /* Management Engine Limit */ -+#define MELCK (1 << 10) /* ME Range Lock */ -+#define ME_STLEN_EN (1 << 11) /* ME Stolen Memory Enable */ - - #define PAM0 0x80 - #define PAM1 0x81 --- -2.39.5 - diff --git a/config/coreboot/default/patches/0047-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch b/config/coreboot/default/patches/0047-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch new file mode 100644 index 00000000..988ae4e6 --- /dev/null +++ b/config/coreboot/default/patches/0047-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch @@ -0,0 +1,52 @@ +From 53f2d47ee6ebaa8d47b076a6c2a1514c91247b95 Mon Sep 17 00:00:00 2001 +From: Leah Rowe +Date: Mon, 12 Aug 2024 02:15:24 +0100 +Subject: [PATCH 47/51] nb/x4x: define INTEL_GMA_DPLL_REF_FREQ + +set it to 96MHz. fixes the following build error when +building for x4x boards e.g. gigabyte ga-g41m-es2l: + +hw-gfx-gma-plls.adb:465:46: error: "INTEL_GMA_DPLL_REF_FREQ" not declared in "Config" +make: *** [Makefile:423: build/ramstage/libgfxinit/common/g45/hw-gfx-gma-plls.o] Error 1 + +this error was introduced when merging coreboot/dell +into coreboot/default in lbmk. nicholas chin's fix in lbmk +was as follows: + +commit 8629873a6043067affc137be275b7aa69cb1f10c +Author: Nicholas Chin +Date: Mon May 20 10:46:25 2024 -0600 + + Fix E6400 display issue with 1440 x 900 panel + +this currently corresponds to the patch in lbmk, +as of 12 august 2024: + +0042-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch + +The assumption prior to Nicholas's fix was 96MHz, so set +it accordingly on x4x northbridge. + +Signed-off-by: Leah Rowe +--- + src/northbridge/intel/x4x/Kconfig | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig +index 9af063819b..93ba575b95 100644 +--- a/src/northbridge/intel/x4x/Kconfig ++++ b/src/northbridge/intel/x4x/Kconfig +@@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_X4X + + if NORTHBRIDGE_INTEL_X4X + ++config INTEL_GMA_DPLL_REF_FREQ ++ int ++ default 96000000 ++ + config CBFS_SIZE + default 0x100000 if !SOUTHBRIDGE_INTEL_I82801GX + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0048-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch b/config/coreboot/default/patches/0048-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch deleted file mode 100644 index b4108c7b..00000000 --- a/config/coreboot/default/patches/0048-haswell-NRI-Add-DDR3-JEDEC-reset-and-init.patch +++ /dev/null @@ -1,1036 +0,0 @@ -From cc302630662eee011a903df4fd7a36d82bd22203 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sat, 7 May 2022 21:49:40 +0200 -Subject: [PATCH 48/65] haswell NRI: Add DDR3 JEDEC reset and init - -Implement JEDEC reset and init sequence for DDR3. The MRS commands are -issued through the REUT (Robust Electrical Unified Testing) hardware. - -Change-Id: I2a0c066537021b587599228086727cb1e041bff5 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 3 + - .../intel/haswell/native_raminit/ddr3.c | 217 ++++++++++++++++++ - .../haswell/native_raminit/io_comp_control.c | 19 ++ - .../haswell/native_raminit/jedec_reset.c | 120 ++++++++++ - .../haswell/native_raminit/raminit_main.c | 2 + - .../haswell/native_raminit/raminit_native.h | 99 ++++++++ - .../haswell/native_raminit/reg_structs.h | 154 +++++++++++++ - .../intel/haswell/native_raminit/reut.c | 196 ++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 21 ++ - src/southbridge/intel/lynxpoint/pch.h | 2 + - 10 files changed, 833 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/ddr3.c - create mode 100644 src/northbridge/intel/haswell/native_raminit/jedec_reset.c - create mode 100644 src/northbridge/intel/haswell/native_raminit/reut.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index 37d527e972..e9212df9e6 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -1,11 +1,14 @@ - ## SPDX-License-Identifier: GPL-2.0-or-later - - romstage-y += configure_mc.c -+romstage-y += ddr3.c -+romstage-y += jedec_reset.c - romstage-y += lookup_timings.c - romstage-y += init_mpll.c - romstage-y += io_comp_control.c - romstage-y += memory_map.c - romstage-y += raminit_main.c - romstage-y += raminit_native.c -+romstage-y += reut.c - romstage-y += spd_bitmunching.c - romstage-y += timings_refresh.c -diff --git a/src/northbridge/intel/haswell/native_raminit/ddr3.c b/src/northbridge/intel/haswell/native_raminit/ddr3.c -new file mode 100644 -index 0000000000..6ddb11488b ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/ddr3.c -@@ -0,0 +1,217 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+#define DDR3_RTTNOM(a, b, c) (((a) << 9) | ((b) << 6) | ((c) << 2)) -+ -+uint16_t encode_ddr3_rttnom(const uint32_t rttnom) -+{ -+ switch (rttnom) { -+ case 0: return DDR3_RTTNOM(0, 0, 0); /* RttNom is disabled */ -+ case 20: return DDR3_RTTNOM(1, 0, 0); /* RZQ/12 */ -+ case 30: return DDR3_RTTNOM(1, 0, 1); /* RZQ/8 */ -+ case 40: return DDR3_RTTNOM(0, 1, 1); /* RZQ/6 */ -+ case 60: return DDR3_RTTNOM(0, 0, 1); /* RZQ/4 */ -+ case 120: return DDR3_RTTNOM(0, 1, 0); /* RZQ/2 */ -+ } -+ printk(BIOS_ERR, "%s: Invalid rtt_nom value %u\n", __func__, rttnom); -+ return 0; -+} -+ -+static const uint8_t jedec_wr_t[12] = { 1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0 }; -+ -+static void ddr3_program_mr0(struct sysinfo *ctrl, const uint8_t dll_reset) -+{ -+ assert(ctrl->tWR >= 5 && ctrl->tWR <= 16); -+ assert(ctrl->tAA >= 4); -+ const uint8_t jedec_cas = ctrl->tAA - 4; -+ const union { -+ struct __packed { -+ uint16_t burst_length : 2; // Bits 1:0 -+ uint16_t cas_latency_msb : 1; // Bits 2:2 -+ uint16_t read_burst_type : 1; // Bits 3:3 -+ uint16_t cas_latency_low : 3; // Bits 6:4 -+ uint16_t test_mode : 1; // Bits 7:7 -+ uint16_t dll_reset : 1; // Bits 8:8 -+ uint16_t write_recovery : 3; // Bits 11:9 -+ uint16_t precharge_pd_dll : 1; // Bits 12:12 -+ uint16_t : 3; // Bits 15:13 -+ }; -+ uint16_t raw; -+ } mr0reg = { -+ .burst_length = 0, -+ .cas_latency_msb = !!(jedec_cas & BIT(3)), -+ .read_burst_type = 0, -+ .cas_latency_low = jedec_cas & 0x7, -+ .dll_reset = 1, -+ .write_recovery = jedec_wr_t[ctrl->tWR - 5], -+ .precharge_pd_dll = 0, -+ }; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { -+ if (!rank_in_ch(ctrl, slot + slot, channel)) -+ continue; -+ -+ if (!ctrl->restore_mrs) -+ ctrl->mr0[channel][slot] = mr0reg.raw; -+ } -+ reut_issue_mrs_all(ctrl, channel, 0, ctrl->mr0[channel]); -+ } -+} -+ -+void ddr3_program_mr1(struct sysinfo *ctrl, const uint8_t wl_mode, const uint8_t q_off) -+{ -+ /* -+ * JESD79-3F (JEDEC DDR3 spec) refers to bit 0 of MR1 as 'DLL Enable'. -+ * However, its encoding is weird, and 'DLL Disable' makes more sense. -+ * -+ * Moreover, bit 5 is part of ODIC (Output Driver Impedance Control), -+ * but all encodings where MR1 bit 5 is 1 are reserved. Thus, omit it. -+ */ -+ union { -+ struct __packed { -+ uint16_t dll_disable : 1; // Bits 0:0 -+ uint16_t od_impedance_ctl : 1; // Bits 1:1 -+ uint16_t odt_rtt_nom_low : 1; // Bits 2:2 -+ uint16_t additive_latency : 2; // Bits 4:3 -+ uint16_t : 1; // Bits 5:5 -+ uint16_t odt_rtt_nom_mid : 1; // Bits 6:6 -+ uint16_t write_level_mode : 1; // Bits 7:7 -+ uint16_t : 1; // Bits 8:8 -+ uint16_t odt_rtt_nom_high : 1; // Bits 9:9 -+ uint16_t : 1; // Bits 10:10 -+ uint16_t t_dqs : 1; // Bits 11:11 -+ uint16_t q_off : 1; // Bits 12:12 -+ uint16_t : 3; // Bits 15:13 -+ }; -+ uint16_t raw; -+ } mr1reg = { -+ .dll_disable = 0, -+ .od_impedance_ctl = 1, /* RZQ/7 */ -+ .additive_latency = 0, -+ .write_level_mode = wl_mode, -+ .t_dqs = 0, -+ .q_off = q_off, -+ }; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ mr1reg.raw &= ~RTTNOM_MASK; -+ mr1reg.raw |= encode_ddr3_rttnom(ctrl->dpc[channel] == 2 ? 60 : 0); -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { -+ if (!rank_in_ch(ctrl, slot + slot, channel)) -+ continue; -+ -+ if (!ctrl->restore_mrs) -+ ctrl->mr1[channel][slot] = mr1reg.raw; -+ } -+ reut_issue_mrs_all(ctrl, channel, 1, ctrl->mr1[channel]); -+ } -+} -+ -+enum { -+ RTT_WR_OFF = 0, -+ RTT_WR_60 = 1, -+ RTT_WR_120 = 2, -+}; -+ -+static void ddr3_program_mr2(struct sysinfo *ctrl) -+{ -+ assert(ctrl->tCWL >= 5); -+ const bool dimm_srt = ctrl->flags.ext_temp_refresh && !ctrl->flags.asr; -+ -+ const union { -+ struct __packed { -+ uint16_t partial_array_sr : 3; // Bits 0:2 -+ uint16_t cas_write_latency : 3; // Bits 5:3 -+ uint16_t auto_self_refresh : 1; // Bits 6:6 -+ uint16_t self_refresh_temp : 1; // Bits 7:7 -+ uint16_t : 1; // Bits 8:8 -+ uint16_t odt_rtt_wr : 2; // Bits 10:9 -+ uint16_t : 5; // Bits 15:11 -+ }; -+ uint16_t raw; -+ } mr2reg = { -+ .partial_array_sr = 0, -+ .cas_write_latency = ctrl->tCWL - 5, -+ .auto_self_refresh = ctrl->flags.asr, -+ .self_refresh_temp = dimm_srt, -+ .odt_rtt_wr = is_hsw_ult() ? RTT_WR_120 : RTT_WR_60, -+ }; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { -+ if (!rank_in_ch(ctrl, slot + slot, channel)) -+ continue; -+ -+ if (!ctrl->restore_mrs) -+ ctrl->mr2[channel][slot] = mr2reg.raw; -+ } -+ /* MR2 shadow register is similar but not identical to MR2 */ -+ if (!ctrl->restore_mrs) { -+ union tc_mr2_shadow_reg tc_mr2_shadow = { -+ .raw = mr2reg.raw & 0x073f, -+ }; -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { -+ if (!rank_in_ch(ctrl, slot + slot, channel)) -+ continue; -+ -+ if (dimm_srt) -+ tc_mr2_shadow.srt_available |= BIT(slot); -+ -+ if (ctrl->rank_mirrored[channel] & BIT(slot + slot + 1)) -+ tc_mr2_shadow.addr_bit_swizzle |= BIT(slot); -+ } -+ mchbar_write32(TC_MR2_SHADOW_ch(channel), tc_mr2_shadow.raw); -+ } -+ reut_issue_mrs_all(ctrl, channel, 2, ctrl->mr2[channel]); -+ } -+} -+ -+static void ddr3_program_mr3(struct sysinfo *ctrl, const uint8_t mpr_mode) -+{ -+ const union { -+ struct __packed { -+ uint16_t mpr_loc : 2; // Bits 1:0 -+ uint16_t mpr_mode : 1; // Bits 2:2 -+ uint16_t : 13; // Bits 15:3 -+ }; -+ uint16_t raw; -+ } mr3reg = { -+ .mpr_loc = 0, -+ .mpr_mode = mpr_mode, -+ }; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { -+ if (!rank_in_ch(ctrl, slot + slot, channel)) -+ continue; -+ -+ if (!ctrl->restore_mrs) -+ ctrl->mr3[channel][slot] = mr3reg.raw; -+ } -+ reut_issue_mrs_all(ctrl, channel, 3, ctrl->mr3[channel]); -+ } -+} -+ -+enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl) -+{ -+ ddr3_program_mr2(ctrl); -+ ddr3_program_mr3(ctrl, 0); -+ ddr3_program_mr1(ctrl, 0, 0); -+ ddr3_program_mr0(ctrl, 1); -+ return reut_issue_zq(ctrl, ctrl->chanmap, ZQ_INIT); -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c -index d45b608dd3..8a55fd81b2 100644 ---- a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c -+++ b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c -@@ -8,6 +8,25 @@ - - #include "raminit_native.h" - -+enum raminit_status io_reset(void) -+{ -+ union mc_init_state_g_reg mc_init_state_g = { -+ .raw = mchbar_read32(MC_INIT_STATE_G), -+ }; -+ mc_init_state_g.reset_io = 1; -+ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); -+ struct stopwatch timer; -+ stopwatch_init_msecs_expire(&timer, 2000); -+ do { -+ mc_init_state_g.raw = mchbar_read32(MC_INIT_STATE_G); -+ if (mc_init_state_g.reset_io == 0) -+ return RAMINIT_STATUS_SUCCESS; -+ -+ } while (!stopwatch_expired(&timer)); -+ printk(BIOS_ERR, "Timed out waiting for DDR I/O reset to complete\n"); -+ return RAMINIT_STATUS_POLL_TIMEOUT; -+} -+ - enum raminit_status wait_for_first_rcomp(void) - { - struct stopwatch timer; -diff --git a/src/northbridge/intel/haswell/native_raminit/jedec_reset.c b/src/northbridge/intel/haswell/native_raminit/jedec_reset.c -new file mode 100644 -index 0000000000..de0f676758 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/jedec_reset.c -@@ -0,0 +1,120 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+static void assert_reset(const bool do_reset) -+{ -+ if (is_hsw_ult()) { -+ uint32_t pm_cfg2 = RCBA32(PM_CFG2); -+ if (do_reset) -+ pm_cfg2 &= ~PM_CFG2_DRAM_RESET_CTL; -+ else -+ pm_cfg2 |= PM_CFG2_DRAM_RESET_CTL; -+ RCBA32(PM_CFG2) = pm_cfg2; -+ } else { -+ union mc_init_state_g_reg mc_init_state_g = { -+ .raw = mchbar_read32(MC_INIT_STATE_G), -+ }; -+ mc_init_state_g.ddr_not_reset = !do_reset; -+ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); -+ } -+} -+ -+/* -+ * Perform JEDEC reset. -+ * -+ * If RTT_NOM is to be enabled in MR1, the ODT input signal must be -+ * statically held low in our system since RTT_NOM is always enabled. -+ */ -+static void jedec_reset(struct sysinfo *ctrl) -+{ -+ if (is_hsw_ult()) -+ assert_reset(false); -+ -+ union mc_init_state_g_reg mc_init_state_g = { -+ .ddr_not_reset = 1, -+ .safe_self_refresh = 1, -+ }; -+ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); -+ -+ union reut_misc_cke_ctrl_reg reut_misc_cke_ctrl = { -+ .cke_override = 0xf, -+ .cke_on = 0, -+ }; -+ mchbar_write32(REUT_MISC_CKE_CTRL, reut_misc_cke_ctrl.raw); -+ -+ assert_reset(true); -+ -+ /** TODO: check and switch DDR3 voltage here (mainboard-specific) **/ -+ -+ udelay(200); -+ -+ assert_reset(false); -+ -+ udelay(500); -+ -+ mc_init_state_g.dclk_enable = 1; -+ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); -+ -+ /* Delay at least 20 nanoseconds for tCKSRX */ -+ tick_delay(1); -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ reut_misc_cke_ctrl.cke_on = ctrl->rankmap[channel]; -+ mchbar_write32(REUT_ch_MISC_CKE_CTRL(channel), reut_misc_cke_ctrl.raw); -+ } -+ -+ /* -+ * Wait minimum of reset CKE exit time, tXPR. -+ * Spec says MAX(tXS, 5 tCK). 5 tCK is 10 ns. -+ */ -+ tick_delay(1); -+} -+ -+enum raminit_status do_jedec_init(struct sysinfo *ctrl) -+{ -+ /* Never do a JEDEC reset in S3 resume */ -+ if (ctrl->bootmode == BOOTMODE_S3) -+ return RAMINIT_STATUS_SUCCESS; -+ -+ enum raminit_status status = io_reset(); -+ if (status) -+ return status; -+ -+ status = wait_for_first_rcomp(); -+ if (status) -+ return status; -+ -+ /* Force ODT low (JEDEC spec) */ -+ const union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { -+ .odt_override = 0xf, -+ .odt_on = 0, -+ }; -+ mchbar_write32(REUT_MISC_ODT_CTRL, reut_misc_odt_ctrl.raw); -+ -+ /* -+ * Note: Haswell MRC does not clear ODT override for LPDDR3. However, -+ * Broadwell MRC does. Hell suspects this difference is important, as -+ * there is an erratum in the specification update for Broadwell: -+ * -+ * Erratum BDM74: LPDDR3 Memory Training May Cause Platform Boot Failure -+ */ -+ if (ctrl->lpddr) -+ die("%s: LPDDR-specific JEDEC init not implemented\n", __func__); -+ -+ jedec_reset(ctrl); -+ status = ddr3_jedec_init(ctrl); -+ if (!status) -+ ctrl->restore_mrs = true; -+ -+ /* Release ODT override */ -+ mchbar_write32(REUT_MISC_ODT_CTRL, 0); -+ return status; -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 559dfc3a4e..94b268468c 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -24,6 +24,7 @@ static const struct task_entry cold_boot[] = { - { convert_timings, true, "CONVTIM", }, - { configure_mc, true, "CONFMC", }, - { configure_memory_map, true, "MEMMAP", }, -+ { do_jedec_init, true, "JEDECINIT", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -@@ -57,6 +58,7 @@ static void initialize_ctrl(struct sysinfo *ctrl) - ctrl->stepping = get_stepping(ctrl->cpu); - ctrl->vdd_mv = is_hsw_ult() ? 1350 : 1500; /** FIXME: Hardcoded, does it matter? **/ - ctrl->dq_pins_interleaved = cfg->dq_pins_interleaved; -+ ctrl->restore_mrs = false; - ctrl->bootmode = bootmode; - } - -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 8f937c4ccd..759d755d6d 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -28,6 +28,30 @@ - /* Always use 12 legs for emphasis (not trained) */ - #define TXEQFULLDRV (3 << 4) - -+/* DDR3 mode register bits */ -+#define MR0_DLL_RESET BIT(8) -+ -+#define MR1_WL_ENABLE BIT(7) -+#define MR1_QOFF_ENABLE BIT(12) /* If set, output buffers disabled */ -+ -+#define RTTNOM_MASK (BIT(9) | BIT(6) | BIT(2)) -+ -+/* ZQ calibration types */ -+enum { -+ ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ -+ ZQ_LONG, /* DDR3: ZQCL with tZQoper, LPDDR3: ZQ Long with tZQCL */ -+ ZQ_SHORT, /* DDR3: ZQCS with tZQCS, LPDDR3: ZQ Short with tZQCS */ -+ ZQ_RESET, /* DDR3: not used, LPDDR3: ZQ Reset with tZQreset */ -+}; -+ -+/* REUT initialisation modes */ -+enum { -+ REUT_MODE_IDLE = 0, -+ REUT_MODE_TEST = 1, -+ REUT_MODE_MRS = 2, -+ REUT_MODE_NOP = 3, /* Normal operation mode */ -+}; -+ - enum command_training_iteration { - CT_ITERATION_CLOCK = 0, - CT_ITERATION_CMD_NORTH, -@@ -51,6 +75,7 @@ enum raminit_status { - RAMINIT_STATUS_UNSUPPORTED_MEMORY, - RAMINIT_STATUS_MPLL_INIT_FAILURE, - RAMINIT_STATUS_POLL_TIMEOUT, -+ RAMINIT_STATUS_REUT_ERROR, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -73,6 +98,7 @@ struct sysinfo { - uint32_t cpu; /* CPUID value */ - - bool dq_pins_interleaved; -+ bool restore_mrs; - - /** TODO: ECC support untested **/ - bool is_ecc; -@@ -162,6 +188,11 @@ struct sysinfo { - union tc_bank_rank_b_reg tc_bankrank_b[NUM_CHANNELS]; - union tc_bank_rank_c_reg tc_bankrank_c[NUM_CHANNELS]; - union tc_bank_rank_d_reg tc_bankrank_d[NUM_CHANNELS]; -+ -+ uint16_t mr0[NUM_CHANNELS][NUM_SLOTS]; -+ uint16_t mr1[NUM_CHANNELS][NUM_SLOTS]; -+ uint16_t mr2[NUM_CHANNELS][NUM_SLOTS]; -+ uint16_t mr3[NUM_CHANNELS][NUM_SLOTS]; - }; - - static inline bool is_hsw_ult(void) -@@ -197,6 +228,53 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl) - memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); - } - -+/* Number of ticks to wait in units of 69.841279 ns (citation needed) */ -+static inline void tick_delay(const uint32_t delay) -+{ -+ /* Just perform reads to a random register */ -+ for (uint32_t start = 0; start <= delay; start++) -+ mchbar_read32(REUT_ERR_DATA_STATUS); -+} -+ -+/* -+ * 64-bit MCHBAR registers need to be accessed atomically. If one uses -+ * two 32-bit ops instead, there will be problems with the REUT's CADB -+ * (Command Address Data Buffer): hardware automatically advances the -+ * pointer into the register file after a write to the input register. -+ */ -+static inline uint64_t mchbar_read64(const uintptr_t x) -+{ -+ const uint64_t *offset = (uint64_t *)(CONFIG_FIXED_MCHBAR_MMIO_BASE + x); -+ uint64_t mmxsave, v; -+ asm volatile ( -+ "\n\t movq %%mm0, %0" -+ "\n\t movq %2, %%mm0" -+ "\n\t movq %%mm0, %1" -+ "\n\t movq %3, %%mm0" -+ "\n\t emms" -+ : "=m"(mmxsave), -+ "=m"(v) -+ : "m"(offset[0]), -+ "m"(mmxsave)); -+ return v; -+} -+ -+static inline void mchbar_write64(const uintptr_t x, const uint64_t v) -+{ -+ const uint64_t *offset = (uint64_t *)(CONFIG_FIXED_MCHBAR_MMIO_BASE + x); -+ uint64_t mmxsave; -+ asm volatile ( -+ "\n\t movq %%mm0, %0" -+ "\n\t movq %2, %%mm0" -+ "\n\t movq %%mm0, %1" -+ "\n\t movq %3, %%mm0" -+ "\n\t emms" -+ : "=m"(mmxsave) -+ : "m"(offset[0]), -+ "m"(v), -+ "m"(mmxsave)); -+} -+ - void raminit_main(enum raminit_boot_mode bootmode); - - enum raminit_status collect_spd_info(struct sysinfo *ctrl); -@@ -204,6 +282,7 @@ enum raminit_status initialise_mpll(struct sysinfo *ctrl); - enum raminit_status convert_timings(struct sysinfo *ctrl); - enum raminit_status configure_mc(struct sysinfo *ctrl); - enum raminit_status configure_memory_map(struct sysinfo *ctrl); -+enum raminit_status do_jedec_init(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -@@ -216,8 +295,28 @@ uint32_t get_tXS_offset(uint32_t mem_clock_mhz); - uint32_t get_tZQOPER(uint32_t mem_clock_mhz, bool lpddr); - uint32_t get_tZQCS(uint32_t mem_clock_mhz, bool lpddr); - -+enum raminit_status io_reset(void); - enum raminit_status wait_for_first_rcomp(void); - -+uint16_t encode_ddr3_rttnom(uint32_t rttnom); -+void ddr3_program_mr1(struct sysinfo *ctrl, uint8_t wl_mode, uint8_t q_off); -+enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl); -+ -+void reut_issue_mrs( -+ struct sysinfo *ctrl, -+ uint8_t channel, -+ uint8_t rankmask, -+ uint8_t mr, -+ uint16_t val); -+ -+void reut_issue_mrs_all( -+ struct sysinfo *ctrl, -+ uint8_t channel, -+ uint8_t mr, -+ const uint16_t val[NUM_SLOTS]); -+ -+enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type); -+ - uint8_t get_rx_bias(const struct sysinfo *ctrl); - - uint8_t get_tCWL(uint32_t mem_clock_mhz); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index 70487e1640..9929f617fe 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -335,6 +335,127 @@ union mcscheds_cbit_reg { - uint32_t raw; - }; - -+union reut_pat_cadb_prog_reg { -+ struct __packed { -+ uint32_t addr : 16; // Bits 15:0 -+ uint32_t : 8; // Bits 23:16 -+ uint32_t bank : 3; // Bits 26:24 -+ uint32_t : 5; // Bits 31:27 -+ uint32_t cs : 4; // Bits 35:32 -+ uint32_t : 4; // Bits 39:36 -+ uint32_t cmd : 3; // Bits 42:40 -+ uint32_t : 5; // Bits 47:43 -+ uint32_t odt : 4; // Bits 51:48 -+ uint32_t : 4; // Bits 55:52 -+ uint32_t cke : 4; // Bits 59:56 -+ uint32_t : 4; // Bits 63:60 -+ }; -+ uint64_t raw; -+ uint32_t raw32[2]; -+}; -+ -+union reut_pat_cadb_mrs_reg { -+ struct __packed { -+ uint32_t delay_gap : 3; // Bits 2:0 -+ uint32_t : 5; // Bits 7:3 -+ uint32_t start_ptr : 3; // Bits 10:8 -+ uint32_t : 5; // Bits 15:11 -+ uint32_t end_ptr : 3; // Bits 18:16 -+ uint32_t : 5; // Bits 23:19 -+ uint32_t curr_ptr : 3; // Bits 26:24 -+ uint32_t : 5; // Bits 31:27 -+ }; -+ uint32_t raw; -+}; -+ -+union reut_seq_cfg_reg { -+ struct __packed { -+ uint32_t : 3; // Bits 2:0 -+ uint32_t stop_base_seq_on_wrap_trigger : 1; // Bits 3:3 -+ uint32_t : 1; // Bits 4:4 -+ uint32_t address_update_rate_mode : 1; // Bits 5:5 -+ uint32_t : 1; // Bits 6:6 -+ uint32_t enable_dummy_reads : 1; // Bits 7:7 -+ uint32_t : 2; // Bits 9:8 -+ uint32_t enable_constant_write_strobe : 1; // Bits 10:10 -+ uint32_t global_control : 1; // Bits 11:11 -+ uint32_t initialization_mode : 2; // Bits 13:12 -+ uint32_t : 2; // Bits 15:14 -+ uint32_t early_steppings_loop_count : 5; // Bits 20:16 *** Not on C0 *** -+ uint32_t : 3; // Bits 23:21 -+ uint32_t subsequence_start_pointer : 3; // Bits 26:24 -+ uint32_t : 1; // Bits 27:27 -+ uint32_t subsequence_end_pointer : 3; // Bits 30:28 -+ uint32_t : 1; // Bits 31:31 -+ uint32_t start_test_delay : 10; // Bits 41:32 -+ uint32_t : 22; // Bits 63:42 -+ }; -+ uint64_t raw; -+ uint32_t raw32[2]; -+}; -+ -+union reut_seq_ctl_reg { -+ struct __packed { -+ uint32_t start_test : 1; // Bits 0:0 -+ uint32_t stop_test : 1; // Bits 1:1 -+ uint32_t clear_errors : 1; // Bits 2:2 -+ uint32_t : 1; // Bits 3:3 -+ uint32_t stop_on_error : 1; // Bits 4:4 -+ uint32_t : 27; // Bits 31:5 -+ }; -+ uint32_t raw; -+}; -+ -+union reut_global_err_reg { -+ struct __packed { -+ uint32_t ch_error : 2; // Bits 1:0 -+ uint32_t : 14; // Bits 15:2 -+ uint32_t ch_test_done : 2; // Bits 17:16 -+ uint32_t : 14; // Bits 31:18 -+ }; -+ uint32_t raw; -+}; -+ -+union reut_misc_cke_ctrl_reg { -+ struct __packed { -+ uint32_t cke_override : 4; // Bits 3:0 -+ uint32_t : 4; // Bits 7:4 -+ uint32_t cke_en_start_test_sync : 1; // Bits 8:8 -+ uint32_t : 7; // Bits 15:9 -+ uint32_t cke_on : 4; // Bits 19:16 -+ uint32_t : 12; // Bits 31:20 -+ }; -+ uint32_t raw; -+}; -+ -+union reut_misc_odt_ctrl_reg { -+ struct __packed { -+ uint32_t odt_override : 4; // Bits 3:0 -+ uint32_t : 12; // Bits 15:4 -+ uint32_t odt_on : 4; // Bits 19:16 -+ uint32_t : 11; // Bits 30:20 -+ uint32_t mpr_train_ddr_on : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union mcscheds_dft_misc_reg { -+ struct __packed { -+ uint32_t wdar : 1; // Bits 0:0 -+ uint32_t safe_mask_sel : 3; // Bits 3:1 -+ uint32_t force_rcv_en : 1; // Bits 4:4 -+ uint32_t : 3; // Bits 7:5 -+ uint32_t ddr_qualifier : 2; // Bits 9:8 -+ uint32_t qualifier_length : 2; // Bits 11:10 -+ uint32_t wdb_block_en : 1; // Bits 12:12 -+ uint32_t rt_dft_read_ptr : 4; // Bits 16:13 -+ uint32_t rt_dft_read_enable : 1; // Bits 17:17 -+ uint32_t rt_dft_read_sel_addr : 1; // Bits 18:18 -+ uint32_t : 13; // Bits 31:19 -+ }; -+ uint32_t raw; -+}; -+ - union tc_bank_reg { - struct __packed { - uint32_t tRCD : 5; // Bits 4:0 -@@ -428,6 +549,18 @@ union tc_srftp_reg { - uint32_t raw; - }; - -+union tc_mr2_shadow_reg { -+ struct __packed { -+ uint32_t mr2_shadow_low : 6; // Bits 5:0 -+ uint32_t srt_available : 2; // Bits 7:6 -+ uint32_t mr2_shadow_high : 3; // Bits 10:8 -+ uint32_t : 3; // Bits 13:11 -+ uint32_t addr_bit_swizzle : 2; // Bits 15:14 -+ uint32_t : 16; // Bits 31:16 -+ }; -+ uint32_t raw; -+}; -+ - union mcmain_command_rate_limit_reg { - struct __packed { - uint32_t enable_cmd_limit : 1; // Bits 0:0 -@@ -483,6 +616,27 @@ union mad_zr_reg { - uint32_t raw; - }; - -+union mc_init_state_g_reg { -+ struct __packed { -+ uint32_t pu_mrc_done : 1; // Bits 0:0 -+ uint32_t ddr_not_reset : 1; // Bits 1:1 -+ uint32_t : 1; // Bits 2:2 -+ uint32_t refresh_enable : 1; // Bits 3:3 -+ uint32_t : 1; // Bits 4:4 -+ uint32_t mc_init_done_ack : 1; // Bits 5:5 -+ uint32_t : 1; // Bits 6:6 -+ uint32_t mrc_done : 1; // Bits 7:7 -+ uint32_t safe_self_refresh : 1; // Bits 8:8 -+ uint32_t : 1; // Bits 9:9 -+ uint32_t hvm_gate_ddr_reset : 1; // Bits 10:10 -+ uint32_t : 11; // Bits 21:11 -+ uint32_t dclk_enable : 1; // Bits 22:22 -+ uint32_t reset_io : 1; // Bits 23:23 -+ uint32_t : 8; // Bits 31:24 -+ }; -+ uint32_t raw; -+}; -+ - /* Same definition for P_COMP, M_COMP, D_COMP */ - union pcu_comp_reg { - struct __packed { -diff --git a/src/northbridge/intel/haswell/native_raminit/reut.c b/src/northbridge/intel/haswell/native_raminit/reut.c -new file mode 100644 -index 0000000000..31019f74a1 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/reut.c -@@ -0,0 +1,196 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+enum { -+ CADB_CMD_MRS = 0, -+ CADB_CMD_REF = 1, -+ CADB_CMD_PRE = 2, -+ CADB_CMD_ACT = 3, -+ CADB_CMD_WR = 4, -+ CADB_CMD_RD = 5, -+ CADB_CMD_ZQ = 6, -+ CADB_CMD_NOP = 7, -+}; -+ -+/* -+ * DDR3 rank mirror swaps the following pins: A3<->A4, A5<->A6, A7<->A8, BA0<->BA1 -+ * -+ * Note that the swapped bits are contiguous. We can use some XOR magic to swap the bits. -+ * Address lanes are at bits 0..15 and bank selects are at bits 24..26 on the REUT register. -+ */ -+#define MIRROR_BITS (BIT(24) | BIT(7) | BIT(5) | BIT(3)) -+static uint64_t cadb_prog_rank_mirror(const uint64_t cadb_prog) -+{ -+ /* First XOR: find which pairs of bits are different (need swapping) */ -+ const uint64_t tmp64 = (cadb_prog ^ (cadb_prog >> 1)) & MIRROR_BITS; -+ -+ /* Second XOR: invert the pairs of bits that have different values */ -+ return cadb_prog ^ (tmp64 | tmp64 << 1); -+} -+ -+static enum raminit_status reut_write_cadb_cmd( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const uint8_t rankmask, -+ const uint8_t cmd, -+ const uint8_t bank, -+ const uint16_t valarr[NUM_SLOTRANKS], -+ const uint8_t delay) -+{ -+ union mcscheds_dft_misc_reg dft_misc = { -+ .raw = mchbar_read32(MCSCHEDS_DFT_MISC), -+ }; -+ dft_misc.ddr_qualifier = 0; -+ mchbar_write32(MCSCHEDS_DFT_MISC, dft_misc.raw); -+ -+ /* Pointer will be dynamically incremented after a write to CADB_PROG register */ -+ mchbar_write8(REUT_ch_PAT_CADB_WRITE_PTR(channel), 0); -+ -+ uint8_t count = 0; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!(ctrl->rankmap[channel] & BIT(rank) & rankmask)) -+ continue; -+ -+ union reut_pat_cadb_prog_reg reut_cadb_prog = { -+ .addr = valarr[rank], -+ .bank = bank, -+ .cs = ~BIT(rank), /* CS is active low */ -+ .cmd = cmd, -+ .cke = 0xf, -+ }; -+ if (ctrl->rank_mirrored[channel] & BIT(rank)) -+ reut_cadb_prog.raw = cadb_prog_rank_mirror(reut_cadb_prog.raw); -+ -+ mchbar_write64(REUT_ch_PAT_CADB_PROG(channel), reut_cadb_prog.raw); -+ count++; -+ } -+ if (!count) { -+ printk(BIOS_ERR, "%s: rankmask is invalid\n", __func__); -+ return RAMINIT_STATUS_UNSPECIFIED_ERROR; /** FIXME: Is this needed? **/ -+ } -+ const union reut_pat_cadb_mrs_reg reut_cadb_mrs = { -+ .delay_gap = delay ? delay : 3, -+ .end_ptr = count - 1, -+ }; -+ mchbar_write32(REUT_ch_PAT_CADB_MRS(channel), reut_cadb_mrs.raw); -+ -+ const uint32_t reut_seq_cfg_save = mchbar_read32(REUT_ch_SEQ_CFG(channel)); -+ union reut_seq_cfg_reg reut_seq_cfg = { -+ .raw = reut_seq_cfg_save, -+ }; -+ reut_seq_cfg.global_control = 0; -+ reut_seq_cfg.initialization_mode = REUT_MODE_MRS; -+ mchbar_write32(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); -+ mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { -+ .start_test = 1, -+ .clear_errors = 1, -+ }.raw); -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ union reut_global_err_reg reut_global_err; -+ struct stopwatch timer; -+ stopwatch_init_msecs_expire(&timer, 100); -+ do { -+ reut_global_err.raw = mchbar_read32(REUT_GLOBAL_ERR); -+ if (reut_global_err.ch_error & BIT(channel)) { -+ printk(BIOS_ERR, "Unexpected REUT error for channel %u\n", channel); -+ status = RAMINIT_STATUS_REUT_ERROR; -+ break; -+ } -+ if (stopwatch_expired(&timer)) { -+ printk(BIOS_ERR, "%s: REUT timed out!\n", __func__); -+ status = RAMINIT_STATUS_POLL_TIMEOUT; -+ break; -+ } -+ } while (!(reut_global_err.ch_test_done & BIT(channel))); -+ mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { -+ .clear_errors = 1, -+ }.raw); -+ mchbar_write32(REUT_ch_SEQ_CFG(channel), reut_seq_cfg_save); -+ return status; -+} -+ -+static enum raminit_status reut_write_cadb_cmd_all( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const uint8_t rankmask, -+ const uint8_t cmd, -+ const uint8_t bank, -+ const uint16_t val, -+ const uint8_t delay) -+{ -+ const uint16_t valarr[NUM_SLOTRANKS] = { val, val, val, val }; -+ return reut_write_cadb_cmd(ctrl, channel, rankmask, cmd, bank, valarr, delay); -+} -+ -+void reut_issue_mrs( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const uint8_t rankmask, -+ const uint8_t mr, -+ const uint16_t val) -+{ -+ reut_write_cadb_cmd_all(ctrl, channel, rankmask, CADB_CMD_MRS, mr, val, 0); -+} -+ -+void reut_issue_mrs_all( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const uint8_t mr, -+ const uint16_t val[NUM_SLOTS]) -+{ -+ const uint16_t valarr[NUM_SLOTRANKS] = { val[0], val[0], val[1], val[1] }; -+ reut_write_cadb_cmd(ctrl, channel, 0xf, CADB_CMD_MRS, mr, valarr, 0); -+} -+ -+enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type) -+{ -+ /** TODO: Issuing ZQ commands differs for LPDDR **/ -+ if (ctrl->lpddr) -+ die("%s: LPDDR not yet supported in ZQ calibration\n", __func__); -+ -+ __maybe_unused uint8_t opcode; /* NOTE: Only used for LPDDR */ -+ uint16_t zq = 0; -+ switch (zq_type) { -+ case ZQ_INIT: -+ zq = BIT(10); -+ opcode = 0xff; -+ break; -+ case ZQ_LONG: -+ zq = BIT(10); -+ opcode = 0xab; -+ break; -+ case ZQ_SHORT: -+ opcode = 0x56; -+ break; -+ case ZQ_RESET: -+ opcode = 0xc3; -+ break; -+ default: -+ die("%s: ZQ type %u is invalid\n", __func__, zq_type); -+ } -+ -+ /* ZQCS on single-channel needs a longer delay */ -+ const uint8_t delay = zq_type == ZQ_SHORT && (!ctrl->dpc[0] || !ctrl->dpc[1]) ? 7 : 1; -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!(BIT(channel) & chanmask) || !does_ch_exist(ctrl, channel)) -+ continue; -+ -+ status = reut_write_cadb_cmd_all(ctrl, channel, 0xf, CADB_CMD_ZQ, 0, zq, delay); -+ if (status) -+ break; -+ } -+ -+ /* Wait a bit after ZQ INIT and ZQCL commands */ -+ if (zq) -+ udelay(1); -+ -+ return status; -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 2acc5cbbc8..4fc78a7f43 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -96,15 +96,36 @@ - - #define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) - -+#define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) -+ -+#define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch) -+ -+#define REUT_ch_PAT_CADB_WRITE_PTR(ch) _MCMAIN_C(0x41bc, ch) -+#define REUT_ch_PAT_CADB_PROG(ch) _MCMAIN_C(0x41c0, ch) -+ - #define TC_ZQCAL_ch(ch) _MCMAIN_C(0x4290, ch) - #define TC_RFP_ch(ch) _MCMAIN_C(0x4294, ch) - #define TC_RFTP_ch(ch) _MCMAIN_C(0x4298, ch) -+#define TC_MR2_SHADOW_ch(ch) _MCMAIN_C(0x429c, ch) - #define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) - #define TC_SRFTP_ch(ch) _MCMAIN_C(0x42a4, ch) - -+#define REUT_GLOBAL_ERR 0x4804 -+ -+#define REUT_ch_SEQ_CFG(ch) (0x48a8 + 8 * (ch)) -+ -+#define REUT_ch_SEQ_CTL(ch) (0x48b8 + 4 * (ch)) -+ - /* MCMAIN broadcast */ - #define MCSCHEDS_CBIT 0x4c20 - -+#define MCSCHEDS_DFT_MISC 0x4c30 -+ -+#define REUT_ERR_DATA_STATUS 0x4ce0 -+ -+#define REUT_MISC_CKE_CTRL 0x4d90 -+#define REUT_MISC_ODT_CTRL 0x4d94 -+ - #define MCMNTS_SC_WDBWM 0x4f8c - - /* MCDECS */ -diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h -index 07f4b9dc16..5b3696347c 100644 ---- a/src/southbridge/intel/lynxpoint/pch.h -+++ b/src/southbridge/intel/lynxpoint/pch.h -@@ -586,6 +586,8 @@ void mainboard_config_rcba(void); - #define ACPIIRQEN 0x31e0 /* 32bit */ - #define OIC 0x31fe /* 16bit */ - #define PRSTS 0x3310 /* 32bit */ -+#define PM_CFG2 0x333c /* 32bit */ -+#define PM_CFG2_DRAM_RESET_CTL (1 << 26) /* ULT only */ - #define PMSYNC_CONFIG 0x33c4 /* 32bit */ - #define PMSYNC_CONFIG2 0x33cc /* 32bit */ - #define SOFT_RESET_CTRL 0x38f4 --- -2.39.5 - diff --git a/config/coreboot/default/patches/0048-mb-dell-Convert-E6400-into-a-variant.patch b/config/coreboot/default/patches/0048-mb-dell-Convert-E6400-into-a-variant.patch new file mode 100644 index 00000000..156d5c8d --- /dev/null +++ b/config/coreboot/default/patches/0048-mb-dell-Convert-E6400-into-a-variant.patch @@ -0,0 +1,243 @@ +From 92556743e92cc02524296b653de5241160876218 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Thu, 26 Sep 2024 19:48:26 -0600 +Subject: [PATCH 48/51] mb/dell: Convert E6400 into a variant + +All the GM45 Dell Latitudes should be nearly identical, so convert the +E6400 port into a variant so that future ports for the other systems can +share code with each other. + +Change-Id: I8094fce56eaaadb20aef173644cd3b2c0b008e95 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/e6400/Makefile.mk | 10 -------- + .../dell/{e6400 => gm45_latitude}/Kconfig | 22 +++++++++++++----- + .../{e6400 => gm45_latitude}/Kconfig.name | 0 + src/mainboard/dell/gm45_latitude/Makefile.mk | 11 +++++++++ + .../dell/{e6400 => gm45_latitude}/acpi/ec.asl | 0 + .../acpi/ich9_pci_irqs.asl | 0 + .../{e6400 => gm45_latitude}/acpi/superio.asl | 0 + .../dell/{e6400 => gm45_latitude}/blc.c | 0 + .../{e6400 => gm45_latitude}/board_info.txt | 0 + .../dell/{e6400 => gm45_latitude}/bootblock.c | 0 + .../{e6400 => gm45_latitude}/cmos.default | 0 + .../dell/{e6400 => gm45_latitude}/cmos.layout | 0 + .../dell/{e6400 => gm45_latitude}/cstates.c | 0 + .../{e6400 => gm45_latitude}/devicetree.cb | 1 - + .../dell/{e6400 => gm45_latitude}/dsdt.asl | 0 + .../dell/{e6400 => gm45_latitude}/mainboard.c | 0 + .../dell/{e6400 => gm45_latitude}/romstage.c | 0 + .../variants}/e6400/data.vbt | Bin + .../variants}/e6400/gma-mainboard.ads | 0 + .../{ => gm45_latitude/variants}/e6400/gpio.c | 0 + .../variants}/e6400/hda_verb.c | 0 + .../variants/e6400/overridetree.cb | 7 ++++++ + 22 files changed, 34 insertions(+), 17 deletions(-) + delete mode 100644 src/mainboard/dell/e6400/Makefile.mk + rename src/mainboard/dell/{e6400 => gm45_latitude}/Kconfig (64%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/Kconfig.name (100%) + create mode 100644 src/mainboard/dell/gm45_latitude/Makefile.mk + rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/ec.asl (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/ich9_pci_irqs.asl (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/superio.asl (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/blc.c (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/board_info.txt (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/bootblock.c (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/cmos.default (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/cmos.layout (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/cstates.c (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/devicetree.cb (98%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/dsdt.asl (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/mainboard.c (100%) + rename src/mainboard/dell/{e6400 => gm45_latitude}/romstage.c (100%) + rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/data.vbt (100%) + rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/gma-mainboard.ads (100%) + rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/gpio.c (100%) + rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/hda_verb.c (100%) + create mode 100644 src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb + +diff --git a/src/mainboard/dell/e6400/Makefile.mk b/src/mainboard/dell/e6400/Makefile.mk +deleted file mode 100644 +index ca3a82db48..0000000000 +--- a/src/mainboard/dell/e6400/Makefile.mk ++++ /dev/null +@@ -1,10 +0,0 @@ +-## SPDX-License-Identifier: GPL-2.0-only +- +-bootblock-y += bootblock.c +- +-romstage-y += gpio.c +- +-ramstage-y += cstates.c +-ramstage-y += blc.c +- +-ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads +diff --git a/src/mainboard/dell/e6400/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig +similarity index 64% +rename from src/mainboard/dell/e6400/Kconfig +rename to src/mainboard/dell/gm45_latitude/Kconfig +index 6fe1b1c456..ba76fb6e8c 100644 +--- a/src/mainboard/dell/e6400/Kconfig ++++ b/src/mainboard/dell/gm45_latitude/Kconfig +@@ -1,9 +1,7 @@ + ## SPDX-License-Identifier: GPL-2.0-only + +-if BOARD_DELL_E6400 +- +-config BOARD_SPECIFIC_OPTIONS +- def_bool y ++config BOARD_DELL_GM45_LATITUDE_COMMON ++ def_bool n + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_P + select NORTHBRIDGE_INTEL_GM45 +@@ -19,19 +17,31 @@ config BOARD_SPECIFIC_OPTIONS + select INTEL_GMA_HAVE_VBT + select EC_DELL_MEC5035 + ++ ++config BOARD_DELL_E6400 ++ select BOARD_DELL_GM45_LATITUDE_COMMON ++ ++if BOARD_DELL_GM45_LATITUDE_COMMON ++ + config INTEL_GMA_DPLL_REF_FREQ + default 100000000 + + config MAINBOARD_DIR +- default "dell/e6400" ++ default "dell/gm45_latitude" + + config MAINBOARD_PART_NUMBER + default "Latitude E6400" if BOARD_DELL_E6400 + ++config OVERRIDE_DEVICETREE ++ default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" ++ ++config VARIANT_DIR ++ default "e6400" if BOARD_DELL_E6400 ++ + config USBDEBUG_HCD_INDEX + default 1 + + config CBFS_SIZE + default 0x1A0000 + +-endif # BOARD_DELL_E6400 ++endif # BOARD_DELL_GM45_LATITUDE_COMMON +diff --git a/src/mainboard/dell/e6400/Kconfig.name b/src/mainboard/dell/gm45_latitude/Kconfig.name +similarity index 100% +rename from src/mainboard/dell/e6400/Kconfig.name +rename to src/mainboard/dell/gm45_latitude/Kconfig.name +diff --git a/src/mainboard/dell/gm45_latitude/Makefile.mk b/src/mainboard/dell/gm45_latitude/Makefile.mk +new file mode 100644 +index 0000000000..5295d5be22 +--- /dev/null ++++ b/src/mainboard/dell/gm45_latitude/Makefile.mk +@@ -0,0 +1,11 @@ ++## SPDX-License-Identifier: GPL-2.0-only ++ ++bootblock-y += bootblock.c ++ ++romstage-y += variants/$(VARIANT_DIR)/gpio.c ++ ++ramstage-y += cstates.c ++ramstage-y += blc.c ++ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c ++ ++ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads +diff --git a/src/mainboard/dell/e6400/acpi/ec.asl b/src/mainboard/dell/gm45_latitude/acpi/ec.asl +similarity index 100% +rename from src/mainboard/dell/e6400/acpi/ec.asl +rename to src/mainboard/dell/gm45_latitude/acpi/ec.asl +diff --git a/src/mainboard/dell/e6400/acpi/ich9_pci_irqs.asl b/src/mainboard/dell/gm45_latitude/acpi/ich9_pci_irqs.asl +similarity index 100% +rename from src/mainboard/dell/e6400/acpi/ich9_pci_irqs.asl +rename to src/mainboard/dell/gm45_latitude/acpi/ich9_pci_irqs.asl +diff --git a/src/mainboard/dell/e6400/acpi/superio.asl b/src/mainboard/dell/gm45_latitude/acpi/superio.asl +similarity index 100% +rename from src/mainboard/dell/e6400/acpi/superio.asl +rename to src/mainboard/dell/gm45_latitude/acpi/superio.asl +diff --git a/src/mainboard/dell/e6400/blc.c b/src/mainboard/dell/gm45_latitude/blc.c +similarity index 100% +rename from src/mainboard/dell/e6400/blc.c +rename to src/mainboard/dell/gm45_latitude/blc.c +diff --git a/src/mainboard/dell/e6400/board_info.txt b/src/mainboard/dell/gm45_latitude/board_info.txt +similarity index 100% +rename from src/mainboard/dell/e6400/board_info.txt +rename to src/mainboard/dell/gm45_latitude/board_info.txt +diff --git a/src/mainboard/dell/e6400/bootblock.c b/src/mainboard/dell/gm45_latitude/bootblock.c +similarity index 100% +rename from src/mainboard/dell/e6400/bootblock.c +rename to src/mainboard/dell/gm45_latitude/bootblock.c +diff --git a/src/mainboard/dell/e6400/cmos.default b/src/mainboard/dell/gm45_latitude/cmos.default +similarity index 100% +rename from src/mainboard/dell/e6400/cmos.default +rename to src/mainboard/dell/gm45_latitude/cmos.default +diff --git a/src/mainboard/dell/e6400/cmos.layout b/src/mainboard/dell/gm45_latitude/cmos.layout +similarity index 100% +rename from src/mainboard/dell/e6400/cmos.layout +rename to src/mainboard/dell/gm45_latitude/cmos.layout +diff --git a/src/mainboard/dell/e6400/cstates.c b/src/mainboard/dell/gm45_latitude/cstates.c +similarity index 100% +rename from src/mainboard/dell/e6400/cstates.c +rename to src/mainboard/dell/gm45_latitude/cstates.c +diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/gm45_latitude/devicetree.cb +similarity index 98% +rename from src/mainboard/dell/e6400/devicetree.cb +rename to src/mainboard/dell/gm45_latitude/devicetree.cb +index e9f3915d17..76dae87153 100644 +--- a/src/mainboard/dell/e6400/devicetree.cb ++++ b/src/mainboard/dell/gm45_latitude/devicetree.cb +@@ -15,7 +15,6 @@ chip northbridge/intel/gm45 + register "pci_mmio_size" = "2048" + + device domain 0 on +- subsystemid 0x1028 0x0233 inherit + ops gm45_pci_domain_ops + + device pci 00.0 on end # host bridge +diff --git a/src/mainboard/dell/e6400/dsdt.asl b/src/mainboard/dell/gm45_latitude/dsdt.asl +similarity index 100% +rename from src/mainboard/dell/e6400/dsdt.asl +rename to src/mainboard/dell/gm45_latitude/dsdt.asl +diff --git a/src/mainboard/dell/e6400/mainboard.c b/src/mainboard/dell/gm45_latitude/mainboard.c +similarity index 100% +rename from src/mainboard/dell/e6400/mainboard.c +rename to src/mainboard/dell/gm45_latitude/mainboard.c +diff --git a/src/mainboard/dell/e6400/romstage.c b/src/mainboard/dell/gm45_latitude/romstage.c +similarity index 100% +rename from src/mainboard/dell/e6400/romstage.c +rename to src/mainboard/dell/gm45_latitude/romstage.c +diff --git a/src/mainboard/dell/e6400/data.vbt b/src/mainboard/dell/gm45_latitude/variants/e6400/data.vbt +similarity index 100% +rename from src/mainboard/dell/e6400/data.vbt +rename to src/mainboard/dell/gm45_latitude/variants/e6400/data.vbt +diff --git a/src/mainboard/dell/e6400/gma-mainboard.ads b/src/mainboard/dell/gm45_latitude/variants/e6400/gma-mainboard.ads +similarity index 100% +rename from src/mainboard/dell/e6400/gma-mainboard.ads +rename to src/mainboard/dell/gm45_latitude/variants/e6400/gma-mainboard.ads +diff --git a/src/mainboard/dell/e6400/gpio.c b/src/mainboard/dell/gm45_latitude/variants/e6400/gpio.c +similarity index 100% +rename from src/mainboard/dell/e6400/gpio.c +rename to src/mainboard/dell/gm45_latitude/variants/e6400/gpio.c +diff --git a/src/mainboard/dell/e6400/hda_verb.c b/src/mainboard/dell/gm45_latitude/variants/e6400/hda_verb.c +similarity index 100% +rename from src/mainboard/dell/e6400/hda_verb.c +rename to src/mainboard/dell/gm45_latitude/variants/e6400/hda_verb.c +diff --git a/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb b/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb +new file mode 100644 +index 0000000000..acc34a2252 +--- /dev/null ++++ b/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb +@@ -0,0 +1,7 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/gm45 ++ device domain 0 on ++ subsystemid 0x1028 0x0233 inherit ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0049-haswell-NRI-Add-pre-training-steps.patch b/config/coreboot/default/patches/0049-haswell-NRI-Add-pre-training-steps.patch deleted file mode 100644 index ffec948d..00000000 --- a/config/coreboot/default/patches/0049-haswell-NRI-Add-pre-training-steps.patch +++ /dev/null @@ -1,392 +0,0 @@ -From 0f160dee563155e93422fc77c53251419043d4dc Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sat, 7 May 2022 23:12:18 +0200 -Subject: [PATCH 49/65] haswell NRI: Add pre-training steps - -Implement pre-training steps, which consist of enabling ECC I/O and -filling the WDB (Write Data Buffer, stores test patterns) through a -magic LDAT port. - -Change-Id: Ie2e09e3b218c4569ed8de5c5e1b05d491032e0f1 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/raminit_main.c | 35 ++++ - .../haswell/native_raminit/raminit_native.h | 24 +++ - .../haswell/native_raminit/reg_structs.h | 45 +++++ - .../intel/haswell/native_raminit/setup_wdb.c | 159 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 9 + - 6 files changed, 273 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/setup_wdb.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index e9212df9e6..8d7d4e4db0 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -10,5 +10,6 @@ romstage-y += memory_map.c - romstage-y += raminit_main.c - romstage-y += raminit_native.c - romstage-y += reut.c -+romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c - romstage-y += timings_refresh.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 94b268468c..5e4674957d 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -3,6 +3,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -12,6 +13,39 @@ - - #include "raminit_native.h" - -+static enum raminit_status pre_training(struct sysinfo *ctrl) -+{ -+ /* Skip on S3 resume */ -+ if (ctrl->bootmode == BOOTMODE_S3) -+ return RAMINIT_STATUS_SUCCESS; -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) { -+ if (!rank_in_ch(ctrl, slot + slot, channel)) -+ continue; -+ -+ printk(RAM_DEBUG, "C%uS%u:\n", channel, slot); -+ printk(RAM_DEBUG, "\tMR0: 0x%04x\n", ctrl->mr0[channel][slot]); -+ printk(RAM_DEBUG, "\tMR1: 0x%04x\n", ctrl->mr1[channel][slot]); -+ printk(RAM_DEBUG, "\tMR2: 0x%04x\n", ctrl->mr2[channel][slot]); -+ printk(RAM_DEBUG, "\tMR3: 0x%04x\n", ctrl->mr3[channel][slot]); -+ printk(RAM_DEBUG, "\n"); -+ } -+ if (ctrl->is_ecc) { -+ union mad_dimm_reg mad_dimm = { -+ .raw = mchbar_read32(MAD_DIMM(channel)), -+ }; -+ /* Enable ECC I/O */ -+ mad_dimm.ecc_mode = 1; -+ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); -+ /* Wait 4 usec after enabling the ECC I/O, needed by HW */ -+ udelay(4); -+ } -+ } -+ setup_wdb(ctrl); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ - struct task_entry { - enum raminit_status (*task)(struct sysinfo *); - bool is_enabled; -@@ -25,6 +59,7 @@ static const struct task_entry cold_boot[] = { - { configure_mc, true, "CONFMC", }, - { configure_memory_map, true, "MEMMAP", }, - { do_jedec_init, true, "JEDECINIT", }, -+ { pre_training, true, "PRETRAIN", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 759d755d6d..4d9487d79c 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -36,6 +36,13 @@ - - #define RTTNOM_MASK (BIT(9) | BIT(6) | BIT(2)) - -+#define BASIC_VA_PAT_SPREAD_8 0x01010101 -+ -+#define WDB_CACHE_LINE_SIZE 8 -+ -+#define NUM_WDB_CL_MUX_SEEDS 3 -+#define NUM_CADB_MUX_SEEDS 3 -+ - /* ZQ calibration types */ - enum { - ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ -@@ -317,6 +324,23 @@ void reut_issue_mrs_all( - - enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type); - -+void write_wdb_fixed_pat( -+ const struct sysinfo *ctrl, -+ const uint8_t patterns[], -+ const uint8_t pat_mask[], -+ uint8_t spread, -+ uint16_t start); -+ -+void write_wdb_va_pat( -+ const struct sysinfo *ctrl, -+ uint32_t agg_mask, -+ uint32_t vic_mask, -+ uint8_t vic_rot, -+ uint16_t start); -+ -+void program_wdb_lfsr(const struct sysinfo *ctrl, bool cleanup); -+void setup_wdb(const struct sysinfo *ctrl); -+ - uint8_t get_rx_bias(const struct sysinfo *ctrl); - - uint8_t get_tCWL(uint32_t mem_clock_mhz); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index 9929f617fe..7aa8d8c8b2 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -335,6 +335,18 @@ union mcscheds_cbit_reg { - uint32_t raw; - }; - -+union reut_pat_cl_mux_lmn_reg { -+ struct __packed { -+ uint32_t l_data_select : 1; // Bits 0:0 -+ uint32_t en_sweep_freq : 1; // Bits 1:1 -+ uint32_t : 6; // Bits 7:2 -+ uint32_t l_counter : 8; // Bits 15:8 -+ uint32_t m_counter : 8; // Bits 23:16 -+ uint32_t n_counter : 8; // Bits 31:24 -+ }; -+ uint32_t raw; -+}; -+ - union reut_pat_cadb_prog_reg { - struct __packed { - uint32_t addr : 16; // Bits 15:0 -@@ -439,6 +451,39 @@ union reut_misc_odt_ctrl_reg { - uint32_t raw; - }; - -+union ldat_pdat_reg { -+ struct __packed { -+ uint32_t fast_addr : 12; // Bits 11:0 -+ uint32_t : 4; // Bits 15:12 -+ uint32_t addr_en : 1; // Bits 16:16 -+ uint32_t seq_en : 1; // Bits 17:17 -+ uint32_t pol_0 : 1; // Bits 18:18 -+ uint32_t pol_1 : 1; // Bits 19:19 -+ uint32_t cmd_a : 4; // Bits 23:20 -+ uint32_t cmd_b : 4; // Bits 27:24 -+ uint32_t cmd_c : 4; // Bits 31:28 -+ }; -+ uint32_t raw; -+}; -+ -+union ldat_sdat_reg { -+ struct __packed { -+ uint32_t bank_sel : 4; // Bits 3:0 -+ uint32_t : 1; // Bits 4:4 -+ uint32_t array_sel : 5; // Bits 9:5 -+ uint32_t cmp : 1; // Bits 10:10 -+ uint32_t replicate : 1; // Bits 11:11 -+ uint32_t dword : 4; // Bits 15:12 -+ uint32_t mode : 2; // Bits 17:16 -+ uint32_t mpmap : 6; // Bits 23:18 -+ uint32_t mpb_offset : 4; // Bits 27:24 -+ uint32_t stage_en : 1; // Bits 28:28 -+ uint32_t shadow : 2; // Bits 30:29 -+ uint32_t : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ - union mcscheds_dft_misc_reg { - struct __packed { - uint32_t wdar : 1; // Bits 0:0 -diff --git a/src/northbridge/intel/haswell/native_raminit/setup_wdb.c b/src/northbridge/intel/haswell/native_raminit/setup_wdb.c -new file mode 100644 -index 0000000000..ec37c48415 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/setup_wdb.c -@@ -0,0 +1,159 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+ -+#include "raminit_native.h" -+ -+static void ldat_write_cacheline( -+ const struct sysinfo *const ctrl, -+ const uint8_t chunk, -+ const uint16_t start, -+ const uint64_t data) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* -+ * Do not do a 64-bit write here. The register is not aligned -+ * to a 64-bit boundary, which could potentially cause issues. -+ */ -+ mchbar_write32(QCLK_ch_LDAT_DATA_IN_x(channel, 0), data & UINT32_MAX); -+ mchbar_write32(QCLK_ch_LDAT_DATA_IN_x(channel, 1), data >> 32); -+ /* -+ * Set REPLICATE = 0 as you don't want to replicate the data. -+ * Set BANK_SEL to the chunk you want to write the 64 bits to. -+ * Set ARRAY_SEL = 0 (the MC WDB) and MODE = 1. -+ */ -+ const union ldat_sdat_reg ldat_sdat = { -+ .bank_sel = chunk, -+ .mode = 1, -+ }; -+ mchbar_write32(QCLK_ch_LDAT_SDAT(channel), ldat_sdat.raw); -+ /* -+ * Finally, write the PDAT register indicating which cacheline -+ * of the WDB you want to write to by setting FAST_ADDR field -+ * to one of the 64 cache lines. Also set CMD_B in the PDAT -+ * register to 4'b1000, indicating that this is a LDAT write. -+ */ -+ const union ldat_pdat_reg ldat_pdat = { -+ .fast_addr = MIN(start, 0xfff), -+ .cmd_b = 8, -+ }; -+ mchbar_write32(QCLK_ch_LDAT_PDAT(channel), ldat_pdat.raw); -+ } -+} -+ -+static void clear_ldat_mode(const struct sysinfo *const ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) -+ mchbar_write32(QCLK_ch_LDAT_SDAT(channel), 0); -+} -+ -+void write_wdb_fixed_pat( -+ const struct sysinfo *const ctrl, -+ const uint8_t patterns[], -+ const uint8_t pat_mask[], -+ const uint8_t spread, -+ const uint16_t start) -+{ -+ for (uint8_t chunk = 0; chunk < WDB_CACHE_LINE_SIZE; chunk++) { -+ uint64_t data = 0; -+ for (uint8_t b = 0; b < 64; b++) { -+ const uint8_t beff = b % spread; -+ const uint8_t burst = patterns[pat_mask[beff]]; -+ if (burst & BIT(chunk)) -+ data |= 1ULL << b; -+ } -+ ldat_write_cacheline(ctrl, chunk, start, data); -+ } -+ clear_ldat_mode(ctrl); -+} -+ -+static inline uint32_t rol_u32(const uint32_t val) -+{ -+ return (val << 1) | ((val >> 31) & 1); -+} -+ -+void write_wdb_va_pat( -+ const struct sysinfo *const ctrl, -+ const uint32_t agg_mask, -+ const uint32_t vic_mask, -+ const uint8_t vic_rot, -+ const uint16_t start) -+{ -+ static const uint8_t va_mask_to_compressed[4] = {0xaa, 0xc0, 0xcc, 0xf0}; -+ uint32_t v_mask = vic_mask; -+ uint32_t a_mask = agg_mask; -+ for (uint8_t v = 0; v < vic_rot; v++) { -+ uint8_t compressed[32] = {0}; -+ /* Iterate through all 32 bits and create a compressed version of cacheline */ -+ for (uint8_t b = 0; b < ARRAY_SIZE(compressed); b++) { -+ const uint8_t vic = !!(v_mask & BIT(b)); -+ const uint8_t agg = !!(a_mask & BIT(b)); -+ const uint8_t index = !vic << 1 | agg << 0; -+ compressed[b] = va_mask_to_compressed[index]; -+ } -+ for (uint8_t chunk = 0; chunk < WDB_CACHE_LINE_SIZE; chunk++) { -+ uint32_t data = 0; -+ for (uint8_t b = 0; b < ARRAY_SIZE(compressed); b++) -+ data |= !!(compressed[b] & BIT(chunk)) << b; -+ -+ const uint64_t data64 = (uint64_t)data << 32 | data; -+ ldat_write_cacheline(ctrl, chunk, start + v, data64); -+ } -+ v_mask = rol_u32(v_mask); -+ a_mask = rol_u32(a_mask); -+ } -+ clear_ldat_mode(ctrl); -+} -+ -+void program_wdb_lfsr(const struct sysinfo *ctrl, const bool cleanup) -+{ -+ /* Cleanup LFSR seeds are sequential */ -+ const uint32_t cleanup_seeds[NUM_WDB_CL_MUX_SEEDS] = { 0xaaaaaa, 0xcccccc, 0xf0f0f0 }; -+ const uint32_t regular_seeds[NUM_WDB_CL_MUX_SEEDS] = { 0xa10ca1, 0xef0d08, 0xad0a1e }; -+ const uint32_t *seeds = cleanup ? cleanup_seeds : regular_seeds; -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t i = 0; i < NUM_WDB_CL_MUX_SEEDS; i++) { -+ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_RD_x(channel, i), seeds[i]); -+ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_WR_x(channel, i), seeds[i]); -+ } -+ } -+} -+ -+void setup_wdb(const struct sysinfo *ctrl) -+{ -+ const uint32_t amask[9] = { -+ 0x86186186, 0x18618618, 0x30c30c30, -+ 0xa28a28a2, 0x8a28a28a, 0x14514514, -+ 0x28a28a28, 0x92492492, 0x24924924, -+ }; -+ const uint32_t vmask = 0x41041041; -+ -+ /* Fill first 8 entries with simple 2-LFSR VA pattern */ -+ write_wdb_va_pat(ctrl, 0, BASIC_VA_PAT_SPREAD_8, 8, 0); -+ -+ /* Fill next 54 entries with 3-LFSR VA pattern */ -+ for (uint8_t a = 0; a < ARRAY_SIZE(amask); a++) -+ write_wdb_va_pat(ctrl, amask[a], vmask, 6, 8 + a * 6); -+ -+ program_wdb_lfsr(ctrl, false); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ const union reut_pat_cl_mux_lmn_reg wdb_cl_mux_lmn = { -+ .en_sweep_freq = 1, -+ .l_counter = 1, -+ .m_counter = 1, -+ .n_counter = 10, -+ }; -+ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_LMN(channel), wdb_cl_mux_lmn.raw); -+ } -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 4fc78a7f43..f8408e51a0 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -94,6 +94,11 @@ - #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) - #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) - -+#define REUT_ch_PAT_WDB_CL_MUX_WR_x(ch, x) _MCMAIN_C_X(0x4048, ch, x) /* x in 0 .. 2 */ -+#define REUT_ch_PAT_WDB_CL_MUX_RD_x(ch, x) _MCMAIN_C_X(0x4054, ch, x) /* x in 0 .. 2 */ -+ -+#define REUT_ch_PAT_WDB_CL_MUX_LMN(ch) _MCMAIN_C(0x4078, ch) -+ - #define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) - - #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) -@@ -110,6 +115,10 @@ - #define MC_INIT_STATE_ch(ch) _MCMAIN_C(0x42a0, ch) - #define TC_SRFTP_ch(ch) _MCMAIN_C(0x42a4, ch) - -+#define QCLK_ch_LDAT_PDAT(ch) _MCMAIN_C(0x42d0, ch) -+#define QCLK_ch_LDAT_SDAT(ch) _MCMAIN_C(0x42d4, ch) -+#define QCLK_ch_LDAT_DATA_IN_x(ch, x) _MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */ -+ - #define REUT_GLOBAL_ERR 0x4804 - - #define REUT_ch_SEQ_CFG(ch) (0x48a8 + 8 * (ch)) --- -2.39.5 - diff --git a/config/coreboot/default/patches/0049-mb-dell-gm45_latitudes-Add-E4300-variant.patch b/config/coreboot/default/patches/0049-mb-dell-gm45_latitudes-Add-E4300-variant.patch new file mode 100644 index 00000000..2cdcd499 --- /dev/null +++ b/config/coreboot/default/patches/0049-mb-dell-gm45_latitudes-Add-E4300-variant.patch @@ -0,0 +1,332 @@ +From ac8ac2543e3ebbc05f79f37d1460cde532a7ee1c Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Thu, 26 Sep 2024 19:51:25 -0600 +Subject: [PATCH 49/51] mb/dell/gm45_latitudes: Add E4300 variant + +Change-Id: I0f2059501b11be103187e3ce1a7c04ab85ae63d2 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/gm45_latitude/Kconfig | 5 + + src/mainboard/dell/gm45_latitude/Kconfig.name | 3 + + .../gm45_latitude/variants/e4300/data.vbt | Bin 0 -> 3881 bytes + .../variants/e4300/gma-mainboard.ads | 17 +++ + .../dell/gm45_latitude/variants/e4300/gpio.c | 138 ++++++++++++++++++ + .../gm45_latitude/variants/e4300/hda_verb.c | 37 +++++ + .../variants/e4300/overridetree.cb | 10 ++ + 7 files changed, 210 insertions(+) + create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt + create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/gma-mainboard.ads + create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c + create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c + create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb + +diff --git a/src/mainboard/dell/gm45_latitude/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig +index ba76fb6e8c..144f9bcdf0 100644 +--- a/src/mainboard/dell/gm45_latitude/Kconfig ++++ b/src/mainboard/dell/gm45_latitude/Kconfig +@@ -21,6 +21,9 @@ config BOARD_DELL_GM45_LATITUDE_COMMON + config BOARD_DELL_E6400 + select BOARD_DELL_GM45_LATITUDE_COMMON + ++config BOARD_DELL_E4300 ++ select BOARD_DELL_GM45_LATITUDE_COMMON ++ + if BOARD_DELL_GM45_LATITUDE_COMMON + + config INTEL_GMA_DPLL_REF_FREQ +@@ -31,12 +34,14 @@ config MAINBOARD_DIR + + config MAINBOARD_PART_NUMBER + default "Latitude E6400" if BOARD_DELL_E6400 ++ default "Latitude E4300" if BOARD_DELL_E4300 + + config OVERRIDE_DEVICETREE + default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" + + config VARIANT_DIR + default "e6400" if BOARD_DELL_E6400 ++ default "e4300" if BOARD_DELL_E4300 + + config USBDEBUG_HCD_INDEX + default 1 +diff --git a/src/mainboard/dell/gm45_latitude/Kconfig.name b/src/mainboard/dell/gm45_latitude/Kconfig.name +index aefe777109..4dc95f46be 100644 +--- a/src/mainboard/dell/gm45_latitude/Kconfig.name ++++ b/src/mainboard/dell/gm45_latitude/Kconfig.name +@@ -1,4 +1,7 @@ + ## SPDX-License-Identifier: GPL-2.0-only + ++config BOARD_DELL_E4300 ++ bool "Latitude E4300" ++ + config BOARD_DELL_E6400 + bool "Latitude E6400" +diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt b/src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..fa2f3db13f688b5687df16a155781d8674ea26f3 +GIT binary patch +literal 3881 +zcmdT`eQXp(6#wnV-R;foUbovquV-n84`GWGmlkRzXWaG>Td6>yG#51CN?M@?>DeM+ +zBI$}GlK6F+nD{}Y|ClJzh>3}Rm=N?2Y5aNhx3i7B*>RjEs#PQ-s5C6@#q~ze8SUuLOHbzw$htxKlQYWCt9NZmC +zVLO$_s2tQZ9MvqmM&%tUr>K0RF`T3FGnHSdOj6O}3>K9-D$(bpDh$)OQqAIh6jOwCxuw)qvS0N+Nk!? +zI~I-~3&u$!iZQuCQ3;=xYZQ&}1^JS!6aFCSvPt-}q{`KV7o=aLI=_ERh8gM+`g(-E +z9-*&C=<5;sdVc?y{2iwmrKs|~Kw5}Heji&vYYqJOG&As1`1?G0hsr2Y&r%2qq-H)u +z>=c836bj~sR4T<{m@IvjLaC(P1v(j%W}uLfs)L~qi^ +z4yaW6zjKK*SSa$dvbC#eRZDAgQ@dDEfr?l)G{1I8}OhGtOw#1e$Fn9wsUmbC8g}vF{$V$Y~rFp!qRJP)Z!2NYEhIpf^PzD_^ptxacQ#R+9@(N>ibe6 +z@|mz|d=bjIxSe3u0>+jxdmFQMG4?34k2C9i#y(>91!n!pSR`S$B&>T9Y*WHMl(1e% +zuvZiInS^yV!G28GmAbW9XHB~OfNnjavje*Qrfz+xvyXNAl5R-`OBnW@hPA<9+YI|D +z!+P0Z#|`^S!}`Hs7Yw^5X*DKUOVaL7TBAv}d|dV9^O8rYn%=4o&5GjdSWeb`yeyf7 +zk&0z-2#I*9^ljWL^79K!Ex#yORz2-nxRYGT$+NdKUcs>{SI2Fyx@<{2w?w*#&%hG* +zeY&DumV{4Nw4(1*^g5r`avbR44Nj-miiQs;Ii;O}*rL^|oYl8hQ9P@{Qf5}Gn;uRg +zI{c?gKNv~R$&eHj8!uus22Br_GkCD$Q)pf! +zGh%f}_&(hXOZrW-WCWJVw`DdrczV_sXGaOvzjt%F!O;{7J-K`tJBTNGZHe^T`VrkY0pv~u^?l~DG9UD8p8(692 Disabled); ++ ++end GMA.Mainboard; +diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c b/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c +new file mode 100644 +index 0000000000..b50f8da0b5 +--- /dev/null ++++ b/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c +@@ -0,0 +1,138 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_NATIVE, ++ .gpio1 = GPIO_MODE_GPIO, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_GPIO, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_NATIVE, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_NATIVE, ++ .gpio16 = GPIO_MODE_NATIVE, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_GPIO, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_GPIO, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_NATIVE, ++ .gpio30 = GPIO_MODE_NATIVE, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio1 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio5 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio18 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio20 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio1 = GPIO_INVERT, ++ .gpio7 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_NATIVE, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_NATIVE, ++ .gpio46 = GPIO_MODE_NATIVE, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_GPIO, ++ .gpio50 = GPIO_MODE_NATIVE, ++ .gpio51 = GPIO_MODE_NATIVE, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_GPIO, ++ .gpio54 = GPIO_MODE_NATIVE, ++ .gpio55 = GPIO_MODE_NATIVE, ++ .gpio56 = GPIO_MODE_GPIO, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_INPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio49 = GPIO_DIR_INPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio53 = GPIO_DIR_INPUT, ++ .gpio56 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ }, ++}; +diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c b/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c +new file mode 100644 +index 0000000000..a9948a93dd +--- /dev/null ++++ b/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c +@@ -0,0 +1,37 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++ ++const u32 cim_verb_data[] = { ++ /* coreboot specific header */ ++ 0x111d76b2, /* IDT 92HD71B7X */ ++ 0x1028024d, /* Subsystem ID */ ++ 13, /* Number of entries */ ++ ++ /* Pin Widget Verb Table */ ++ ++ AZALIA_PIN_CFG(0, 0x0a, 0x0421101f), ++ AZALIA_PIN_CFG(0, 0x0b, 0x04a11021), ++ AZALIA_PIN_CFG(0, 0x0c, 0x40f000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x14, 0x40f000f2), ++ AZALIA_PIN_CFG(0, 0x18, 0x90a601a0), ++ AZALIA_PIN_CFG(0, 0x19, 0x40f000f4), ++ AZALIA_PIN_CFG(0, 0x1e, 0x40f000f5), ++ AZALIA_PIN_CFG(0, 0x1f, 0x40f000f6), ++ AZALIA_PIN_CFG(0, 0x20, 0x40f000f7), ++ AZALIA_PIN_CFG(0, 0x27, 0x40f000f0), ++}; ++ ++const u32 pc_beep_verbs[] = { ++ 0x00170500, /* power up codec */ ++ 0x00d70500, /* power up speakers */ ++ 0x00d70102, /* select mixer (input 0x2) for speakers */ ++ 0x00d70740, /* enable speakers output */ ++ 0x02770720, /* enable beep input */ ++ 0x01737217, /* unmute beep (mixer's input 0x2), set amp 0dB */ ++ 0x00d37000, /* unmute speakers */ ++}; ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb b/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb +new file mode 100644 +index 0000000000..20dfa245fb +--- /dev/null ++++ b/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb +@@ -0,0 +1,10 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/gm45 ++ device domain 0 on ++ subsystemid 0x1028 0x024d inherit ++ chip southbridge/intel/i82801ix ++ device pci 1c.2 off end # PCIe Port #3 ++ end ++ end ++end +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0050-haswell-NRI-Add-REUT-I-O-test-library.patch b/config/coreboot/default/patches/0050-haswell-NRI-Add-REUT-I-O-test-library.patch deleted file mode 100644 index a65a6ea1..00000000 --- a/config/coreboot/default/patches/0050-haswell-NRI-Add-REUT-I-O-test-library.patch +++ /dev/null @@ -1,1130 +0,0 @@ -From 78b25eb96baef7da2f5481572a6df2b88ee2b3d4 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 00:11:29 +0200 -Subject: [PATCH 50/65] haswell NRI: Add REUT I/O test library - -Implement a library to run I/O tests using the REUT hardware. - -Change-Id: Id7b207cd0a3989ddd23c88c6b1f0cfa79d2c861f -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/raminit_native.h | 110 +++ - .../haswell/native_raminit/reg_structs.h | 121 +++ - .../intel/haswell/native_raminit/testing_io.c | 744 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 30 + - 5 files changed, 1006 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/testing_io.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index 8d7d4e4db0..6e1b365602 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -12,4 +12,5 @@ romstage-y += raminit_native.c - romstage-y += reut.c - romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c -+romstage-y += testing_io.c - romstage-y += timings_refresh.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 4d9487d79c..f029e7f076 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -59,6 +59,88 @@ enum { - REUT_MODE_NOP = 3, /* Normal operation mode */ - }; - -+/* REUT error counter control */ -+enum { -+ COUNT_ERRORS_PER_CHANNEL = 0, -+ COUNT_ERRORS_PER_LANE = 1, -+ COUNT_ERRORS_PER_BYTE_GROUP = 2, -+ COUNT_ERRORS_PER_CHUNK = 3, -+}; -+ -+enum wdb_dq_pattern { -+ BASIC_VA = 0, -+ SEGMENT_WDB, -+ CADB, -+ TURN_AROUND, -+ LMN_VA, -+ TURN_AROUND_WR, -+ TURN_AROUND_ODT, -+ RD_RD_TA, -+ RD_RD_TA_ALL, -+}; -+ -+enum reut_cmd_pat { -+ PAT_WR_RD, -+ PAT_WR, -+ PAT_RD, -+ PAT_RD_WR_TA, -+ PAT_WR_RD_TA, -+ PAT_ODT_TA, -+}; -+ -+/* REUT subsequence types (B = Base, O = Offset) */ -+enum { -+ SUBSEQ_B_RD = 0 << 22, -+ SUBSEQ_B_WR = 1 << 22, -+ SUBSEQ_B_RD_WR = 2 << 22, -+ SUBSEQ_B_WR_RD = 3 << 22, -+ SUBSEQ_O_RD = 4 << 22, -+ SUBSEQ_O_WR = 5 << 22, -+}; -+ -+/* REUT mux control */ -+enum { -+ REUT_MUX_LMN = 0, -+ REUT_MUX_BTBUFFER = 1, -+ REUT_MUX_LFSR = 2, -+}; -+ -+/* Increment scale */ -+enum { -+ SCALE_LOGARITHM = 0, -+ SCALE_LINEAR = 1, -+}; -+ -+enum test_stop { -+ NSOE = 0, /* Never stop on error */ -+ NTHSOE = 1, /* Stop on the nth error (we use n = 1) */ -+ ABGSOE = 2, /* Stop on all byte groups error */ -+ ALSOE = 3, /* Stop on all lanes error */ -+}; -+ -+struct wdb_pat { -+ uint32_t start_ptr; /* Starting pointer in WDB */ -+ uint32_t stop_ptr; /* Stopping pointer in WDB */ -+ uint16_t inc_rate; /* How quickly the WDB walks through cachelines */ -+ uint8_t dq_pattern; /* DQ pattern to use (see enum wdb_dq_pattern above) */ -+}; -+ -+struct reut_pole { -+ uint16_t start; -+ uint16_t stop; -+ uint16_t order; -+ uint32_t inc_rate; -+ uint16_t inc_val; -+ bool wrap_trigger; -+}; -+ -+struct reut_box { -+ struct reut_pole rank; -+ struct reut_pole bank; -+ struct reut_pole row; -+ struct reut_pole col; -+}; -+ - enum command_training_iteration { - CT_ITERATION_CLOCK = 0, - CT_ITERATION_CMD_NORTH, -@@ -200,6 +282,10 @@ struct sysinfo { - uint16_t mr1[NUM_CHANNELS][NUM_SLOTS]; - uint16_t mr2[NUM_CHANNELS][NUM_SLOTS]; - uint16_t mr3[NUM_CHANNELS][NUM_SLOTS]; -+ -+ uint8_t dq_pat; -+ -+ uint8_t dq_pat_lc; - }; - - static inline bool is_hsw_ult(void) -@@ -341,6 +427,30 @@ void write_wdb_va_pat( - void program_wdb_lfsr(const struct sysinfo *ctrl, bool cleanup); - void setup_wdb(const struct sysinfo *ctrl); - -+void program_seq_addr(uint8_t channel, const struct reut_box *reut_addr, bool log_seq_addr); -+void program_loop_count(const struct sysinfo *ctrl, uint8_t channel, uint8_t lc_exp); -+ -+void setup_io_test( -+ struct sysinfo *ctrl, -+ uint8_t chanmask, -+ enum reut_cmd_pat cmd_pat, -+ uint16_t num_cl, -+ uint8_t lc, -+ const struct reut_box *reut_addr, -+ enum test_stop soe, -+ const struct wdb_pat *pat, -+ uint8_t en_cadb, -+ uint8_t subseq_wait); -+ -+void setup_io_test_cadb(struct sysinfo *ctrl, uint8_t chanmask, uint8_t lc, enum test_stop soe); -+void setup_io_test_basic_va(struct sysinfo *ctrl, uint8_t chm, uint8_t lc, enum test_stop soe); -+void setup_io_test_mpr(struct sysinfo *ctrl, uint8_t chanmask, uint8_t lc, enum test_stop soe); -+ -+uint8_t select_reut_ranks(struct sysinfo *ctrl, uint8_t channel, uint8_t rankmask); -+ -+void run_mpr_io_test(bool clear_errors); -+uint8_t run_io_test(struct sysinfo *ctrl, uint8_t chanmask, uint8_t dq_pat, bool clear_errors); -+ - uint8_t get_rx_bias(const struct sysinfo *ctrl); - - uint8_t get_tCWL(uint32_t mem_clock_mhz); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index 7aa8d8c8b2..b943259b91 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -347,6 +347,54 @@ union reut_pat_cl_mux_lmn_reg { - uint32_t raw; - }; - -+union reut_err_ctl_reg { -+ struct __packed { -+ uint32_t stop_on_nth_error : 6; // Bits 5:0 -+ uint32_t : 6; // Bits 11:6 -+ uint32_t stop_on_error_control : 2; // Bits 13:12 -+ uint32_t : 2; // Bits 15:14 -+ uint32_t selective_err_enable_chunk : 8; // Bits 23:16 -+ uint32_t selective_err_enable_cacheline : 8; // Bits 31:24 -+ }; -+ uint32_t raw; -+}; -+ -+union reut_pat_cadb_mux_ctrl_reg { -+ struct __packed { -+ uint32_t mux_0_ctrl : 2; // Bits 1:0 -+ uint32_t : 2; // Bits 3:2 -+ uint32_t mux_1_ctrl : 2; // Bits 5:4 -+ uint32_t : 2; // Bits 7:6 -+ uint32_t mux_2_ctrl : 2; // Bits 9:8 -+ uint32_t : 6; // Bits 15:10 -+ uint32_t sel_mux_0_ctrl : 2; // Bits 17:16 -+ uint32_t : 2; // Bits 19:18 -+ uint32_t sel_mux_1_ctrl : 2; // Bits 21:20 -+ uint32_t : 2; // Bits 23:22 -+ uint32_t sel_mux_2_ctrl : 2; // Bits 25:24 -+ uint32_t : 6; // Bits 31:26 -+ }; -+ uint32_t raw; -+}; -+ -+union reut_pat_wdb_cl_mux_cfg_reg { -+ struct __packed { -+ uint32_t mux_0_control : 2; // Bits 1:0 -+ uint32_t : 1; // Bits 2:2 -+ uint32_t mux_1_control : 2; // Bits 4:3 -+ uint32_t : 1; // Bits 5:5 -+ uint32_t mux_2_control : 2; // Bits 7:6 -+ uint32_t : 6; // Bits 13:8 -+ uint32_t ecc_replace_byte_ctl : 1; // Bits 14:14 -+ uint32_t ecc_data_source_sel : 1; // Bits 15:15 -+ uint32_t save_lfsr_seed_rate : 6; // Bits 21:16 -+ uint32_t : 2; // Bits 23:22 -+ uint32_t reload_lfsr_seed_rate : 3; // Bits 26:24 -+ uint32_t : 5; // Bits 31:27 -+ }; -+ uint32_t raw; -+}; -+ - union reut_pat_cadb_prog_reg { - struct __packed { - uint32_t addr : 16; // Bits 15:0 -@@ -366,6 +414,19 @@ union reut_pat_cadb_prog_reg { - uint32_t raw32[2]; - }; - -+union reut_pat_wdb_cl_ctrl_reg { -+ struct __packed { -+ uint32_t inc_rate : 5; // Bits 4:0 -+ uint32_t inc_scale : 1; // Bits 5:5 -+ uint32_t : 2; // Bits 7:6 -+ uint32_t start_ptr : 6; // Bits 13:8 -+ uint32_t : 2; // Bits 15:14 -+ uint32_t end_ptr : 6; // Bits 21:16 -+ uint32_t : 10; // Bits 31:22 -+ }; -+ uint32_t raw; -+}; -+ - union reut_pat_cadb_mrs_reg { - struct __packed { - uint32_t delay_gap : 3; // Bits 2:0 -@@ -406,6 +467,66 @@ union reut_seq_cfg_reg { - uint32_t raw32[2]; - }; - -+union reut_seq_base_addr_reg { -+ struct __packed { -+ uint32_t : 3; // Bits 2:0 -+ uint32_t col_addr : 8; // Bits 10:3 -+ uint32_t : 13; // Bits 23:11 -+ uint32_t row_addr : 16; // Bits 39:24 -+ uint32_t : 8; // Bits 47:40 -+ uint32_t bank_addr : 3; // Bits 50:48 -+ uint32_t : 5; // Bits 55:51 -+ uint32_t rank_addr : 3; // Bits 58:56 -+ uint32_t : 5; // Bits 63:59 -+ }; -+ uint32_t raw32[2]; -+ uint64_t raw; -+}; -+ -+union reut_seq_misc_ctl_reg { -+ struct __packed { -+ uint32_t col_addr_order : 2; // Bits 1:0 -+ uint32_t row_addr_order : 2; // Bits 3:2 -+ uint32_t bank_addr_order : 2; // Bits 5:4 -+ uint32_t rank_addr_order : 2; // Bits 7:6 -+ uint32_t : 5; // Bits 12:8 -+ uint32_t addr_invert_rate : 3; // Bits 15:13 -+ uint32_t : 4; // Bits 19:16 -+ uint32_t col_addr_invert_en : 1; // Bits 20:20 -+ uint32_t row_addr_invert_en : 1; // Bits 21:21 -+ uint32_t bank_addr_invert_en : 1; // Bits 22:22 -+ uint32_t rank_addr_invert_en : 1; // Bits 23:23 -+ uint32_t col_wrap_trigger_en : 1; // Bits 24:24 -+ uint32_t row_wrap_trigger_en : 1; // Bits 25:25 -+ uint32_t bank_wrap_trigger_en : 1; // Bits 26:26 -+ uint32_t rank_wrap_trigger_en : 1; // Bits 27:27 -+ uint32_t col_wrap_carry_en : 1; // Bits 28:28 -+ uint32_t row_wrap_carry_en : 1; // Bits 29:29 -+ uint32_t bank_wrap_carry_en : 1; // Bits 30:30 -+ uint32_t rank_wrap_carry_en : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ -+union reut_seq_addr_inc_ctl_reg { -+ struct __packed { -+ uint32_t : 3; // Bits 2:0 -+ uint32_t col_addr_increment : 8; // Bits 10:3 -+ uint32_t : 1; // Bits 11:11 -+ uint32_t col_addr_update : 8; // Bits 19:12 -+ uint32_t row_addr_increment : 12; // Bits 31:20 -+ uint32_t row_addr_update : 6; // Bits 37:32 -+ uint32_t bank_addr_increment : 3; // Bits 40:38 -+ uint32_t : 3; // Bits 43:41 -+ uint32_t bank_addr_update : 8; // Bits 53:44 -+ uint32_t rank_addr_increment : 3; // Bits 54:52 -+ uint32_t : 1; // Bits 55:55 -+ uint32_t rank_addr_update : 8; // Bits 63:56 -+ }; -+ uint64_t raw; -+ uint32_t raw32[2]; -+}; -+ - union reut_seq_ctl_reg { - struct __packed { - uint32_t start_test : 1; // Bits 0:0 -diff --git a/src/northbridge/intel/haswell/native_raminit/testing_io.c b/src/northbridge/intel/haswell/native_raminit/testing_io.c -new file mode 100644 -index 0000000000..2632c238f8 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/testing_io.c -@@ -0,0 +1,744 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+static void set_cadb_patterns(const uint8_t channel, const uint16_t seeds[NUM_CADB_MUX_SEEDS]) -+{ -+ for (uint8_t i = 0; i < NUM_CADB_MUX_SEEDS; i++) -+ mchbar_write32(REUT_ch_PAT_CADB_MUX_x(channel, i), seeds[i]); -+} -+ -+static void setup_cadb( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const uint8_t vic_spread, -+ const uint8_t vic_bit) -+{ -+ const bool lmn_en = false; -+ -+ /* -+ * Currently, always start writing at CADB row 0. -+ * Could add a start point parameter in the future. -+ */ -+ mchbar_write8(REUT_ch_PAT_CADB_WRITE_PTR(channel), 0); -+ const uint8_t num_cadb_rows = 8; -+ for (uint8_t row = 0; row < num_cadb_rows; row++) { -+ const uint8_t lfsr0 = (row >> 0) & 1; -+ const uint8_t lfsr1 = (row >> 1) & 1; -+ uint64_t reg64 = 0; -+ for (uint8_t bit = 0; bit < 22; bit++) { -+ uint8_t bremap; -+ if (bit >= 19) { -+ /* (bremap in 40 .. 42) => CADB data control */ -+ bremap = bit + 21; -+ } else if (bit >= 16) { -+ /* (bremap in 24 .. 26) => CADB data bank */ -+ bremap = bit + 8; -+ } else { -+ /* (bremap in 0 .. 15) => CADB data address */ -+ bremap = bit; -+ } -+ const uint8_t fine = bit % vic_spread; -+ reg64 |= ((uint64_t)(fine == vic_bit ? lfsr0 : lfsr1)) << bremap; -+ } -+ /* -+ * Write row. CADB pointer is auto incremented after every write. This must be -+ * a single 64-bit write, otherwise the CADB pointer will auto-increment twice. -+ */ -+ mchbar_write64(REUT_ch_PAT_CADB_PROG(channel), reg64); -+ } -+ const union reut_pat_cadb_mux_ctrl_reg cadb_mux_ctrl = { -+ .mux_0_ctrl = lmn_en ? REUT_MUX_LMN : REUT_MUX_LFSR, -+ .mux_1_ctrl = REUT_MUX_LFSR, -+ .mux_2_ctrl = REUT_MUX_LFSR, -+ }; -+ mchbar_write32(REUT_ch_PAT_CADB_MUX_CTRL(channel), cadb_mux_ctrl.raw); -+ const union reut_pat_cl_mux_lmn_reg cadb_cl_mux_lmn = { -+ .en_sweep_freq = 1, -+ .l_counter = 1, -+ .m_counter = 1, -+ .n_counter = 6, -+ }; -+ mchbar_write32(REUT_ch_PAT_CADB_CL_MUX_LMN(channel), cadb_cl_mux_lmn.raw); -+ const uint16_t cadb_mux_seeds[NUM_CADB_MUX_SEEDS] = { 0x0ea1, 0xbeef, 0xdead }; -+ set_cadb_patterns(channel, cadb_mux_seeds); -+} -+ -+static uint32_t calc_rate(const uint32_t rate, const uint32_t lim, const uint8_t scale_bit) -+{ -+ return rate > lim ? log2_ceil(rate - 1) : BIT(scale_bit) | rate; -+} -+ -+void program_seq_addr( -+ const uint8_t channel, -+ const struct reut_box *reut_addr, -+ const bool log_seq_addr) -+{ -+ const int loglevel = log_seq_addr ? BIOS_ERR : BIOS_NEVER; -+ const uint32_t div = 8; -+ union reut_seq_base_addr_reg reut_seq_addr_start = { -+ .col_addr = reut_addr->col.start / div, -+ .row_addr = reut_addr->row.start, -+ .bank_addr = reut_addr->bank.start, -+ .rank_addr = reut_addr->rank.start, -+ }; -+ mchbar_write64(REUT_ch_SEQ_ADDR_START(channel), reut_seq_addr_start.raw); -+ reut_seq_addr_start.raw = mchbar_read64(REUT_ch_SEQ_ADDR_START(channel)); -+ printk(loglevel, "\tStart column: %u\n", reut_seq_addr_start.col_addr); -+ printk(loglevel, "\tStart row: %u\n", reut_seq_addr_start.row_addr); -+ printk(loglevel, "\tStart bank: %u\n", reut_seq_addr_start.bank_addr); -+ printk(loglevel, "\tStart rank: %u\n", reut_seq_addr_start.rank_addr); -+ printk(loglevel, "\n"); -+ -+ union reut_seq_base_addr_reg reut_seq_addr_stop = { -+ .col_addr = reut_addr->col.stop / div, -+ .row_addr = reut_addr->row.stop, -+ .bank_addr = reut_addr->bank.stop, -+ .rank_addr = reut_addr->rank.stop, -+ }; -+ mchbar_write64(REUT_ch_SEQ_ADDR_WRAP(channel), reut_seq_addr_stop.raw); -+ reut_seq_addr_stop.raw = mchbar_read64(REUT_ch_SEQ_ADDR_WRAP(channel)); -+ printk(loglevel, "\tStop column: %u\n", reut_seq_addr_stop.col_addr); -+ printk(loglevel, "\tStop row: %u\n", reut_seq_addr_stop.row_addr); -+ printk(loglevel, "\tStop bank: %u\n", reut_seq_addr_stop.bank_addr); -+ printk(loglevel, "\tStop rank: %u\n", reut_seq_addr_stop.rank_addr); -+ printk(loglevel, "\n"); -+ -+ union reut_seq_misc_ctl_reg reut_seq_misc_ctl = { -+ .col_wrap_trigger_en = reut_addr->col.wrap_trigger, -+ .row_wrap_trigger_en = reut_addr->row.wrap_trigger, -+ .bank_wrap_trigger_en = reut_addr->bank.wrap_trigger, -+ .rank_wrap_trigger_en = reut_addr->rank.wrap_trigger, -+ }; -+ mchbar_write32(REUT_ch_SEQ_MISC_CTL(channel), reut_seq_misc_ctl.raw); -+ printk(loglevel, "\tWrap column: %u\n", reut_addr->col.wrap_trigger); -+ printk(loglevel, "\tWrap row: %u\n", reut_addr->row.wrap_trigger); -+ printk(loglevel, "\tWrap bank: %u\n", reut_addr->bank.wrap_trigger); -+ printk(loglevel, "\tWrap rank: %u\n", reut_addr->rank.wrap_trigger); -+ printk(loglevel, "\n"); -+ -+ union reut_seq_addr_inc_ctl_reg reut_seq_addr_inc_ctl = { -+ .col_addr_update = calc_rate(reut_addr->col.inc_rate, 31, 7), -+ .row_addr_update = calc_rate(reut_addr->row.inc_rate, 15, 5), -+ .bank_addr_update = calc_rate(reut_addr->bank.inc_rate, 31, 7), -+ .rank_addr_update = calc_rate(reut_addr->rank.inc_rate, 31, 7), -+ .col_addr_increment = reut_addr->col.inc_val, -+ .row_addr_increment = reut_addr->row.inc_val, -+ .bank_addr_increment = reut_addr->bank.inc_val, -+ .rank_addr_increment = reut_addr->rank.inc_val, -+ }; -+ printk(loglevel, "\tUpdRate column: %u\n", reut_addr->col.inc_rate); -+ printk(loglevel, "\tUpdRate row: %u\n", reut_addr->row.inc_rate); -+ printk(loglevel, "\tUpdRate bank: %u\n", reut_addr->bank.inc_rate); -+ printk(loglevel, "\tUpdRate rank: %u\n", reut_addr->rank.inc_rate); -+ printk(loglevel, "\n"); -+ printk(loglevel, "\tUpdRateCR column: %u\n", reut_seq_addr_inc_ctl.col_addr_update); -+ printk(loglevel, "\tUpdRateCR row: %u\n", reut_seq_addr_inc_ctl.row_addr_update); -+ printk(loglevel, "\tUpdRateCR bank: %u\n", reut_seq_addr_inc_ctl.bank_addr_update); -+ printk(loglevel, "\tUpdRateCR rank: %u\n", reut_seq_addr_inc_ctl.rank_addr_update); -+ printk(loglevel, "\n"); -+ printk(loglevel, "\tUpdInc column: %u\n", reut_seq_addr_inc_ctl.col_addr_increment); -+ printk(loglevel, "\tUpdInc row: %u\n", reut_seq_addr_inc_ctl.row_addr_increment); -+ printk(loglevel, "\tUpdInc bank: %u\n", reut_seq_addr_inc_ctl.bank_addr_increment); -+ printk(loglevel, "\tUpdInc rank: %u\n", reut_seq_addr_inc_ctl.rank_addr_increment); -+ printk(loglevel, "\n"); -+ mchbar_write64(REUT_ch_SEQ_ADDR_INC_CTL(channel), reut_seq_addr_inc_ctl.raw); -+} -+ -+/* -+ * Early steppings take exponential (base 2) loopcount values, -+ * but later steppings take linear loopcount values elsewhere. -+ * Address the differences in register offset and format here. -+ */ -+void program_loop_count(const struct sysinfo *ctrl, const uint8_t channel, const uint8_t lc_exp) -+{ -+ if (ctrl->stepping >= STEPPING_C0) { -+ const uint32_t loopcount = lc_exp >= 32 ? 0 : BIT(lc_exp); -+ mchbar_write32(HSW_REUT_ch_SEQ_LOOP_COUNT(channel), loopcount); -+ } else { -+ const uint8_t loopcount = lc_exp >= 32 ? 0 : lc_exp + 1; -+ union reut_seq_cfg_reg reut_seq_cfg = { -+ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), -+ }; -+ reut_seq_cfg.early_steppings_loop_count = loopcount; -+ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); -+ } -+} -+ -+static inline void write_subseq(const uint8_t channel, const uint8_t idx, const uint32_t ssq) -+{ -+ mchbar_write32(REUT_ch_SUBSEQ_x_CTL(channel, idx), ssq); -+} -+ -+static void program_subseq( -+ struct sysinfo *const ctrl, -+ const uint8_t channel, -+ const enum reut_cmd_pat cmd_pat, -+ const uint32_t ss_a, -+ const uint32_t ss_b) -+{ -+ switch (cmd_pat) { -+ case PAT_WR_RD_TA: -+ write_subseq(channel, 0, ss_a | SUBSEQ_B_WR); -+ for (uint8_t i = 1; i < 7; i++) -+ write_subseq(channel, i, ss_b | SUBSEQ_B_RD_WR); -+ -+ write_subseq(channel, 7, ss_a | SUBSEQ_B_RD); -+ break; -+ case PAT_RD_WR_TA: -+ write_subseq(channel, 0, ss_b | SUBSEQ_B_WR_RD); -+ break; -+ case PAT_ODT_TA: -+ write_subseq(channel, 0, ss_a | SUBSEQ_B_WR); -+ write_subseq(channel, 1, ss_b | SUBSEQ_B_RD_WR); -+ write_subseq(channel, 2, ss_a | SUBSEQ_B_RD); -+ write_subseq(channel, 3, ss_b | SUBSEQ_B_WR_RD); -+ break; -+ default: -+ write_subseq(channel, 0, ss_a | SUBSEQ_B_WR); -+ write_subseq(channel, 1, ss_a | SUBSEQ_B_RD); -+ break; -+ } -+} -+ -+void setup_io_test( -+ struct sysinfo *ctrl, -+ const uint8_t chanmask, -+ const enum reut_cmd_pat cmd_pat, -+ const uint16_t num_cl, -+ const uint8_t lc, -+ const struct reut_box *const reut_addr, -+ const enum test_stop soe, -+ const struct wdb_pat *const pat, -+ const uint8_t en_cadb, -+ const uint8_t subseq_wait) -+{ -+ if (!chanmask) { -+ printk(BIOS_ERR, "\n%s: chanmask is invalid\n", __func__); -+ return; -+ } -+ -+ /* -+ * Prepare variables needed for both channels. -+ * Check for the cases where this MUST be 1: when -+ * we manually walk through subseq ODT and TA Wr. -+ */ -+ uint8_t lc_exp = MAX(lc - log2_ceil(num_cl), 0); -+ if (cmd_pat == PAT_WR_RD_TA || cmd_pat == PAT_ODT_TA) -+ lc_exp = 0; -+ -+ uint8_t num_clcr; -+ if (num_cl > 127) { -+ /* Assume exponential number */ -+ num_clcr = log2_ceil(num_cl); -+ } else { -+ /* Set number of cache lines as linear number */ -+ num_clcr = num_cl | BIT(7); -+ } -+ -+ const uint16_t num_cl2 = 2 * num_cl; -+ uint8_t num_cl2cr; -+ if (num_cl2 > 127) { -+ /* Assume exponential number */ -+ num_cl2cr = log2_ceil(num_cl2); -+ } else { -+ /* Set number of cache lines as linear number */ -+ num_cl2cr = num_cl2 | BIT(7); -+ } -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!(chanmask & BIT(channel))) { -+ union reut_seq_cfg_reg reut_seq_cfg = { -+ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), -+ }; -+ reut_seq_cfg.global_control = 0; -+ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); -+ continue; -+ } -+ -+ /* -+ * Program CADB -+ */ -+ mchbar_write8(REUT_ch_MISC_PAT_CADB_CTRL(channel), !!en_cadb); -+ if (en_cadb) -+ setup_cadb(ctrl, channel, 7, 8); -+ -+ /* -+ * Program sequence -+ */ -+ uint8_t subseq_start = 0; -+ uint8_t subseq_end = 0; -+ switch (cmd_pat) { -+ case PAT_WR_RD: -+ subseq_end = 1; -+ break; -+ case PAT_WR: -+ break; -+ case PAT_RD: -+ subseq_start = 1; -+ subseq_end = 1; -+ break; -+ case PAT_RD_WR_TA: -+ break; -+ case PAT_WR_RD_TA: -+ subseq_end = 7; -+ break; -+ case PAT_ODT_TA: -+ subseq_end = 3; -+ break; -+ default: -+ die("\n%s: Pattern type %u is invalid\n", __func__, cmd_pat); -+ } -+ const union reut_seq_cfg_reg reut_seq_cfg = { -+ .global_control = 1, -+ .initialization_mode = REUT_MODE_TEST, -+ .subsequence_start_pointer = subseq_start, -+ .subsequence_end_pointer = subseq_end, -+ .start_test_delay = 2, -+ }; -+ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); -+ program_loop_count(ctrl, channel, lc_exp); -+ mchbar_write32(REUT_ch_SEQ_CTL(channel), (union reut_seq_ctl_reg) { -+ .clear_errors = 1, -+ }.raw); -+ -+ /* -+ * Program subsequences -+ */ -+ uint32_t subseq_a = 0; -+ -+ /* Number of cachelines and scale */ -+ subseq_a |= (num_clcr & 0x00ff) << 0; -+ subseq_a |= (subseq_wait & 0x3fff) << 8; -+ -+ /* Reset current base address to start */ -+ subseq_a |= BIT(27); -+ -+ uint32_t subseq_b = 0; -+ -+ /* Number of cachelines and scale */ -+ subseq_b |= (num_cl2cr & 0x00ff) << 0; -+ subseq_b |= (subseq_wait & 0x3fff) << 8; -+ -+ /* Reset current base address to start */ -+ subseq_b |= BIT(27); -+ -+ program_subseq(ctrl, channel, cmd_pat, subseq_a, subseq_b); -+ -+ /* Program sequence address */ -+ program_seq_addr(channel, reut_addr, false); -+ -+ /* Program WDB */ -+ const bool is_linear = pat->inc_rate < 32; -+ mchbar_write32(REUT_ch_WDB_CL_CTRL(channel), (union reut_pat_wdb_cl_ctrl_reg) { -+ .start_ptr = pat->start_ptr, -+ .end_ptr = pat->stop_ptr, -+ .inc_rate = is_linear ? pat->inc_rate : log2_ceil(pat->inc_rate), -+ .inc_scale = is_linear, -+ }.raw); -+ -+ /* Enable LMN in LMN or CADB modes, used to create lots of supply noise */ -+ const bool use_lmn = pat->dq_pattern == LMN_VA || pat->dq_pattern == CADB; -+ union reut_pat_wdb_cl_mux_cfg_reg pat_wdb_cl_mux_cfg = { -+ .mux_0_control = use_lmn ? REUT_MUX_LMN : REUT_MUX_LFSR, -+ .mux_1_control = REUT_MUX_LFSR, -+ .mux_2_control = REUT_MUX_LFSR, -+ .ecc_data_source_sel = 1, -+ }; -+ -+ /* Program LFSR save/restore, too complex unless everything is power of 2 */ -+ if (cmd_pat == PAT_ODT_TA || cmd_pat == PAT_WR_RD_TA) { -+ pat_wdb_cl_mux_cfg.reload_lfsr_seed_rate = log2_ceil(num_cl) + 1; -+ pat_wdb_cl_mux_cfg.save_lfsr_seed_rate = 1; -+ } -+ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_CFG(channel), pat_wdb_cl_mux_cfg.raw); -+ -+ /* Inversion mask is not used */ -+ mchbar_write32(REUT_ch_PAT_WDB_INV(channel), 0); -+ -+ /* Program error checking */ -+ const union reut_err_ctl_reg reut_err_ctl = { -+ .selective_err_enable_cacheline = 0xff, -+ .selective_err_enable_chunk = 0xff, -+ .stop_on_error_control = soe, -+ .stop_on_nth_error = 1, -+ }; -+ mchbar_write32(REUT_ch_ERR_CONTROL(channel), reut_err_ctl.raw); -+ mchbar_write64(REUT_ch_ERR_DATA_MASK(channel), 0); -+ mchbar_write8(REUT_ch_ERR_ECC_MASK(channel), 0); -+ } -+ -+ /* Always do a ZQ short before the beginning of a test */ -+ reut_issue_zq(ctrl, chanmask, ZQ_SHORT); -+} -+ -+void setup_io_test_cadb( -+ struct sysinfo *ctrl, -+ const uint8_t chanmask, -+ const uint8_t lc, -+ const enum test_stop soe) -+{ -+ const struct reut_box reut_addr = { -+ .rank = { -+ .start = 0, -+ .stop = 0, -+ .inc_rate = 32, -+ .inc_val = 1, -+ }, -+ .bank = { -+ .start = 0, -+ .stop = 7, -+ .inc_rate = 3, -+ .inc_val = 1, -+ }, -+ .row = { -+ .start = 0, -+ .stop = 2047, -+ .inc_rate = 3, -+ .inc_val = 73, -+ }, -+ .col = { -+ .start = 0, -+ .stop = 1023, -+ .inc_rate = 0, -+ .inc_val = 53, -+ }, -+ }; -+ const struct wdb_pat pattern = { -+ .start_ptr = 0, -+ .stop_ptr = 9, -+ .inc_rate = 4, -+ .dq_pattern = CADB, -+ }; -+ setup_io_test( -+ ctrl, -+ chanmask, -+ PAT_WR_RD, -+ 128, -+ lc, -+ &reut_addr, -+ soe, -+ &pattern, -+ 1, -+ 0); -+ -+ ctrl->dq_pat_lc = MAX(lc - 2 - 3, 0) + 1; -+ ctrl->dq_pat = CADB; -+} -+ -+void setup_io_test_basic_va( -+ struct sysinfo *ctrl, -+ const uint8_t chanmask, -+ const uint8_t lc, -+ const enum test_stop soe) -+{ -+ const uint32_t spread = 8; -+ const struct reut_box reut_addr = { -+ .rank = { -+ .start = 0, -+ .stop = 0, -+ .inc_rate = 32, -+ .inc_val = 1, -+ }, -+ .col = { -+ .start = 0, -+ .stop = 1023, -+ .inc_rate = 0, -+ .inc_val = 1, -+ }, -+ }; -+ const struct wdb_pat pattern = { -+ .start_ptr = 0, -+ .stop_ptr = spread - 1, -+ .inc_rate = 4, -+ .dq_pattern = BASIC_VA, -+ }; -+ setup_io_test( -+ ctrl, -+ chanmask, -+ PAT_WR_RD, -+ 128, -+ lc, -+ &reut_addr, -+ soe, -+ &pattern, -+ 0, -+ 0); -+ -+ ctrl->dq_pat_lc = MAX(lc - 8, 0) + 1; -+ ctrl->dq_pat = BASIC_VA; -+} -+ -+void setup_io_test_mpr( -+ struct sysinfo *ctrl, -+ const uint8_t chanmask, -+ const uint8_t lc, -+ const enum test_stop soe) -+{ -+ const struct reut_box reut_addr_ddr = { -+ .rank = { -+ .start = 0, -+ .stop = 0, -+ .inc_rate = 32, -+ .inc_val = 1, -+ }, -+ .col = { -+ .start = 0, -+ .stop = 1023, -+ .inc_rate = 0, -+ .inc_val = 1, -+ }, -+ }; -+ const struct reut_box reut_addr_lpddr = { -+ .bank = { -+ .start = 4, -+ .stop = 4, -+ .inc_rate = 0, -+ .inc_val = 0, -+ }, -+ }; -+ const struct wdb_pat pattern = { -+ .start_ptr = 0, -+ .stop_ptr = 9, -+ .inc_rate = 4, -+ .dq_pattern = BASIC_VA, -+ }; -+ setup_io_test( -+ ctrl, -+ chanmask, -+ PAT_RD, -+ 128, -+ lc, -+ ctrl->lpddr ? &reut_addr_lpddr : &reut_addr_ddr, -+ soe, -+ &pattern, -+ 0, -+ 0); -+ -+ ctrl->dq_pat_lc = 1; -+ ctrl->dq_pat = BASIC_VA; -+} -+ -+uint8_t select_reut_ranks(struct sysinfo *ctrl, const uint8_t channel, uint8_t rankmask) -+{ -+ rankmask &= ctrl->rankmap[channel]; -+ -+ uint8_t rank_count = 0; -+ uint32_t rank_log_to_phys = 0; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_mask(rank, rankmask)) -+ continue; -+ -+ rank_log_to_phys |= rank << (4 * rank_count); -+ rank_count++; -+ } -+ mchbar_write32(REUT_ch_RANK_LOG_TO_PHYS(channel), rank_log_to_phys); -+ -+ union reut_seq_cfg_reg reut_seq_cfg = { -+ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), -+ }; -+ if (!rank_count) { -+ reut_seq_cfg.global_control = 0; -+ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); -+ return 0; -+ } -+ union reut_seq_base_addr_reg reut_seq_addr_stop = { -+ .raw = mchbar_read64(REUT_ch_SEQ_ADDR_WRAP(channel)), -+ }; -+ reut_seq_addr_stop.rank_addr = rank_count - 1; -+ mchbar_write64(REUT_ch_SEQ_ADDR_WRAP(channel), reut_seq_addr_stop.raw); -+ -+ reut_seq_cfg.global_control = 1; -+ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); -+ return BIT(channel); -+} -+ -+void run_mpr_io_test(const bool clear_errors) -+{ -+ io_reset(); -+ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { -+ .start_test = 1, -+ .clear_errors = clear_errors, -+ }.raw); -+ tick_delay(2); -+ io_reset(); -+ tick_delay(2); -+ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { -+ .stop_test = 1, -+ }.raw); -+} -+ -+static uint8_t get_num_tests(const uint8_t dq_pat) -+{ -+ switch (dq_pat) { -+ case SEGMENT_WDB: return 4; -+ case CADB: return 7; -+ case TURN_AROUND_WR: return 8; -+ case TURN_AROUND_ODT: return 4; -+ case RD_RD_TA: return 2; -+ case RD_RD_TA_ALL: return 8; -+ default: return 1; -+ } -+} -+ -+uint8_t run_io_test( -+ struct sysinfo *const ctrl, -+ const uint8_t chanmask, -+ const uint8_t dq_pat, -+ const bool clear_errors) -+{ -+ /* SEGMENT_WDB only runs 4 tests */ -+ const uint8_t segment_wdb_lc[4] = { 0, 0, 4, 2 }; -+ const union reut_pat_wdb_cl_ctrl_reg pat_wdb_cl[4] = { -+ [0] = { -+ .start_ptr = 0, -+ .end_ptr = 9, -+ .inc_rate = 25, -+ .inc_scale = SCALE_LINEAR, -+ }, -+ [1] = { -+ .start_ptr = 0, -+ .end_ptr = 9, -+ .inc_rate = 25, -+ .inc_scale = SCALE_LINEAR, -+ }, -+ [2] = { -+ .start_ptr = 10, -+ .end_ptr = 63, -+ .inc_rate = 19, -+ .inc_scale = SCALE_LINEAR, -+ }, -+ [3] = { -+ .start_ptr = 10, -+ .end_ptr = 63, -+ .inc_rate = 10, -+ .inc_scale = SCALE_LINEAR, -+ }, -+ }; -+ const bool is_turnaround = dq_pat == RD_RD_TA || dq_pat == RD_RD_TA_ALL; -+ const uint8_t num_tests = get_num_tests(dq_pat); -+ union tc_bank_rank_a_reg tc_bank_rank_a[NUM_CHANNELS] = { 0 }; -+ if (is_turnaround) { -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!(chanmask & BIT(channel))) -+ continue; -+ -+ tc_bank_rank_a[channel].raw = ctrl->tc_bankrank_a[channel].raw; -+ } -+ } -+ for (uint8_t t = 0; t < num_tests; t++) { -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!(chanmask & BIT(channel))) -+ continue; -+ -+ if (dq_pat == SEGMENT_WDB) { -+ mchbar_write32(REUT_ch_WDB_CL_CTRL(channel), pat_wdb_cl[t].raw); -+ /* -+ * Skip programming LFSR save/restore. Too complex -+ * unless power of 2. Program desired loopcount. -+ */ -+ const uint8_t pat_lc = ctrl->dq_pat_lc + segment_wdb_lc[t]; -+ program_loop_count(ctrl, channel, pat_lc); -+ } else if (dq_pat == CADB) { -+ setup_cadb(ctrl, channel, num_tests, t); -+ } else if (dq_pat == TURN_AROUND_WR || dq_pat == TURN_AROUND_ODT) { -+ union reut_seq_cfg_reg reut_seq_cfg = { -+ .raw = mchbar_read64(REUT_ch_SEQ_CFG(channel)), -+ }; -+ reut_seq_cfg.subsequence_start_pointer = t; -+ reut_seq_cfg.subsequence_end_pointer = t; -+ mchbar_write64(REUT_ch_SEQ_CFG(channel), reut_seq_cfg.raw); -+ union reut_seq_addr_inc_ctl_reg addr_inc_ctl = { -+ .raw = mchbar_read64(REUT_ch_SEQ_ADDR_INC_CTL(channel)), -+ }; -+ uint8_t ta_inc_rate = 1; -+ if (dq_pat == TURN_AROUND_WR && (t == 0 || t == 7)) -+ ta_inc_rate = 0; -+ else if (dq_pat == TURN_AROUND_ODT && (t == 0 || t == 2)) -+ ta_inc_rate = 0; -+ -+ /* Program increment rate as linear value */ -+ addr_inc_ctl.rank_addr_update = BIT(7) | ta_inc_rate; -+ addr_inc_ctl.col_addr_update = BIT(7) | ta_inc_rate; -+ mchbar_write64(REUT_ch_SEQ_ADDR_INC_CTL(channel), -+ addr_inc_ctl.raw); -+ } else if (dq_pat == RD_RD_TA) { -+ tc_bank_rank_a[channel].tRDRD_sr = (t == 0) ? 4 : 5; -+ mchbar_write32(TC_BANK_RANK_A_ch(channel), -+ tc_bank_rank_a[channel].raw); -+ } else if (dq_pat == RD_RD_TA_ALL) { -+ /* -+ * Program tRDRD for SR and DR. Run 8 tests, covering -+ * tRDRD_sr = 4, 5, 6, 7 and tRDRD_dr = min, +1, +2, +3 -+ */ -+ const uint32_t tRDRD_dr = ctrl->tc_bankrank_a[channel].tRDRD_dr; -+ tc_bank_rank_a[channel].tRDRD_sr = (t % 4) + 4; -+ tc_bank_rank_a[channel].tRDRD_dr = (t % 4) + tRDRD_dr; -+ mchbar_write32(TC_BANK_RANK_A_ch(channel), -+ tc_bank_rank_a[channel].raw); -+ -+ /* Program linear rank increment rate */ -+ union reut_seq_addr_inc_ctl_reg addr_inc_ctl = { -+ .raw = mchbar_read64(REUT_ch_SEQ_ADDR_INC_CTL(channel)), -+ }; -+ addr_inc_ctl.rank_addr_update = BIT(7) | (t / 4) ? 0 : 31; -+ mchbar_write64(REUT_ch_SEQ_ADDR_INC_CTL(channel), -+ addr_inc_ctl.raw); -+ } -+ } -+ bool test_soe = false; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!(chanmask & BIT(channel))) -+ continue; -+ -+ const union reut_err_ctl_reg reut_err_ctl = { -+ .raw = mchbar_read32(REUT_ch_ERR_CONTROL(channel)), -+ }; -+ const uint8_t soe = reut_err_ctl.stop_on_error_control; -+ if (soe != NSOE) { -+ test_soe = true; -+ break; -+ } -+ } -+ io_reset(); -+ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { -+ .start_test = 1, -+ .clear_errors = clear_errors && t == 0, -+ }.raw); -+ struct mono_time prev, curr; -+ timer_monotonic_get(&prev); -+ union reut_global_err_reg global_err; -+ do { -+ global_err.raw = mchbar_read32(REUT_GLOBAL_ERR); -+ /** TODO: Clean up this mess **/ -+ timer_monotonic_get(&curr); -+ if (mono_time_diff_microseconds(&prev, &curr) > 1000 * 1000) { -+ mchbar_write32(REUT_GLOBAL_CTL, (union reut_seq_ctl_reg) { -+ .stop_test = 1, -+ }.raw); -+ printk(BIOS_ERR, "REUT timed out, ch_done: %x\n", -+ global_err.ch_test_done); -+ break; -+ } -+ } while ((global_err.ch_test_done & chanmask) != chanmask); -+ if (test_soe && global_err.ch_error & chanmask) -+ break; -+ } -+ if (is_turnaround) { -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!(chanmask & BIT(channel))) -+ continue; -+ -+ mchbar_write32(TC_BANK_RANK_A_ch(channel), -+ ctrl->tc_bankrank_a[channel].raw); -+ } -+ } -+ return ((union reut_global_err_reg)mchbar_read32(REUT_GLOBAL_ERR)).ch_error; -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index f8408e51a0..817a9f8bf8 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -94,20 +94,35 @@ - #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) - #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) - -+#define REUT_ch_PAT_WDB_CL_MUX_CFG(ch) _MCMAIN_C(0x4040, ch) -+ - #define REUT_ch_PAT_WDB_CL_MUX_WR_x(ch, x) _MCMAIN_C_X(0x4048, ch, x) /* x in 0 .. 2 */ - #define REUT_ch_PAT_WDB_CL_MUX_RD_x(ch, x) _MCMAIN_C_X(0x4054, ch, x) /* x in 0 .. 2 */ - - #define REUT_ch_PAT_WDB_CL_MUX_LMN(ch) _MCMAIN_C(0x4078, ch) - -+#define REUT_ch_PAT_WDB_INV(ch) _MCMAIN_C(0x4084, ch) -+ -+#define REUT_ch_ERR_CONTROL(ch) _MCMAIN_C(0x4098, ch) -+#define REUT_ch_ERR_ECC_MASK(ch) _MCMAIN_C(0x409c, ch) -+ - #define SC_WR_ADD_DELAY_ch(ch) _MCMAIN_C(0x40d0, ch) - -+#define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch) -+ - #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) - -+#define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch) - #define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch) -+#define REUT_ch_PAT_CADB_MUX_CTRL(ch) _MCMAIN_C(0x41a0, ch) -+#define REUT_ch_PAT_CADB_MUX_x(ch, x) _MCMAIN_C_X(0x41a4, ch, x) /* x in 0 .. 2 */ - -+#define REUT_ch_PAT_CADB_CL_MUX_LMN(ch) _MCMAIN_C(0x41b0, ch) - #define REUT_ch_PAT_CADB_WRITE_PTR(ch) _MCMAIN_C(0x41bc, ch) - #define REUT_ch_PAT_CADB_PROG(ch) _MCMAIN_C(0x41c0, ch) - -+#define REUT_ch_WDB_CL_CTRL(ch) _MCMAIN_C(0x4200, ch) -+ - #define TC_ZQCAL_ch(ch) _MCMAIN_C(0x4290, ch) - #define TC_RFP_ch(ch) _MCMAIN_C(0x4294, ch) - #define TC_RFTP_ch(ch) _MCMAIN_C(0x4298, ch) -@@ -119,12 +134,27 @@ - #define QCLK_ch_LDAT_SDAT(ch) _MCMAIN_C(0x42d4, ch) - #define QCLK_ch_LDAT_DATA_IN_x(ch, x) _MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */ - -+#define REUT_GLOBAL_CTL 0x4800 - #define REUT_GLOBAL_ERR 0x4804 - -+#define REUT_ch_SUBSEQ_x_CTL(ch, x) (0x4808 + 40 * (ch) + 4 * (x)) -+ - #define REUT_ch_SEQ_CFG(ch) (0x48a8 + 8 * (ch)) - - #define REUT_ch_SEQ_CTL(ch) (0x48b8 + 4 * (ch)) - -+#define REUT_ch_SEQ_ADDR_START(ch) (0x48d8 + 8 * (ch)) -+ -+#define REUT_ch_SEQ_ADDR_WRAP(ch) (0x48e8 + 8 * (ch)) -+ -+#define REUT_ch_SEQ_MISC_CTL(ch) (0x4908 + 4 * (ch)) -+ -+#define REUT_ch_SEQ_ADDR_INC_CTL(ch) (0x4910 + 8 * (ch)) -+ -+#define REUT_ch_RANK_LOG_TO_PHYS(ch) (0x4930 + 4 * (ch)) /* 4 bits per rank */ -+ -+#define HSW_REUT_ch_SEQ_LOOP_COUNT(ch) (0x4980 + 4 * (ch)) /* *** only on C0 *** */ -+ - /* MCMAIN broadcast */ - #define MCSCHEDS_CBIT 0x4c20 - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0050-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch b/config/coreboot/default/patches/0050-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch new file mode 100644 index 00000000..71cc67c1 --- /dev/null +++ b/config/coreboot/default/patches/0050-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch @@ -0,0 +1,70 @@ +From 5e8b899654c31fe771e4b1e96c74c93d4509c3b2 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Fri, 3 May 2024 16:31:12 -0600 +Subject: [PATCH 50/51] mb/dell: Add S3 SMI handler for Dell Latitudes + +Integrate the previously added mec5035_smi_sleep() function into +mainboard code to fix S3 suspend on the SNB/IVB Latitudes and the E7240. +The E6400 does not require the EC command to sucessfully suspend and +resume from S3, though sending it does enable the breathing effect on +the power LED while in S3. Without it, all LEDs turn off during S3. + +Change-Id: Ic0d887f75be13c3fb9f6df62153ac458895e0283 +Signed-off-by: Nicholas Chin +--- + src/mainboard/dell/e7240/smihandler.c | 9 +++++++++ + src/mainboard/dell/gm45_latitude/smihandler.c | 9 +++++++++ + src/mainboard/dell/snb_ivb_latitude/smihandler.c | 9 +++++++++ + 3 files changed, 27 insertions(+) + create mode 100644 src/mainboard/dell/e7240/smihandler.c + create mode 100644 src/mainboard/dell/gm45_latitude/smihandler.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/smihandler.c + +diff --git a/src/mainboard/dell/e7240/smihandler.c b/src/mainboard/dell/e7240/smihandler.c +new file mode 100644 +index 0000000000..00e55b51db +--- /dev/null ++++ b/src/mainboard/dell/e7240/smihandler.c +@@ -0,0 +1,9 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++ ++void mainboard_smi_sleep(u8 slp_typ) ++{ ++ mec5035_smi_sleep(slp_typ); ++} +diff --git a/src/mainboard/dell/gm45_latitude/smihandler.c b/src/mainboard/dell/gm45_latitude/smihandler.c +new file mode 100644 +index 0000000000..00e55b51db +--- /dev/null ++++ b/src/mainboard/dell/gm45_latitude/smihandler.c +@@ -0,0 +1,9 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++ ++void mainboard_smi_sleep(u8 slp_typ) ++{ ++ mec5035_smi_sleep(slp_typ); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/smihandler.c b/src/mainboard/dell/snb_ivb_latitude/smihandler.c +new file mode 100644 +index 0000000000..00e55b51db +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/smihandler.c +@@ -0,0 +1,9 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include ++#include ++ ++void mainboard_smi_sleep(u8 slp_typ) ++{ ++ mec5035_smi_sleep(slp_typ); ++} +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0051-ec-dell-mec5035-Route-power-button-event-to-host.patch b/config/coreboot/default/patches/0051-ec-dell-mec5035-Route-power-button-event-to-host.patch new file mode 100644 index 00000000..65f90e2c --- /dev/null +++ b/config/coreboot/default/patches/0051-ec-dell-mec5035-Route-power-button-event-to-host.patch @@ -0,0 +1,92 @@ +From 1a342c20b8705bbea02d27a73e383ee2808f2558 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin +Date: Tue, 18 Jun 2024 21:31:08 -0600 +Subject: [PATCH 51/51] ec/dell/mec5035: Route power button event to host + +If command 0x3e with an argument of 1 isn't sent to the EC, pressing the +power button results in the EC powering off the system without letting +the OS cleanly shutting itself down. This command and argument tells the +EC to route power button events to the host so that it can determine +what to do. + +The EC command was identified from the ec/google/wilco code, which is +used for Dell's Latitude Chromebooks. According to the EC_GOOGLE_WILCO +Kconfig help text, those ECs run a modified version of Dell's typical +Latitude EC firmware, so it is likely that the two firmware +implementations use similar commands. Examining LPC traffic between the +host and the EC on the Latitude E6400 did reveal that the same command +was being sent by the vendor firmware to the EC, but this does not +confirm that it has the same meaning as the command from the Wilco code. +Sending the command using inb/outb calls in a userspace C program while +running coreboot without this patch did allow subsequent power button +events to be handled by the host, confirming that the command was indeed +the same. + +Change-Id: I5ded315270c0e1efbbc90cfa9d9d894b872e99a2 +Signed-off-by: Nicholas Chin +--- + src/ec/dell/mec5035/mec5035.c | 8 ++++++++ + src/ec/dell/mec5035/mec5035.h | 7 +++++++ + 2 files changed, 15 insertions(+) + +diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c +index 85c2ab0140..bdae929a27 100644 +--- a/src/ec/dell/mec5035/mec5035.c ++++ b/src/ec/dell/mec5035/mec5035.c +@@ -94,6 +94,13 @@ void mec5035_control_radio(enum ec_radio_dev dev, enum ec_radio_state state) + ec_command(CMD_RADIO_CTRL); + } + ++void mec5035_power_button_route(enum ec_power_button_route target) ++{ ++ u8 buf = (u8)target; ++ write_mailbox_regs(&buf, 2, 1); ++ ec_command(CMD_POWER_BUTTON_TO_HOST); ++} ++ + void mec5035_change_wake(u8 source, enum ec_wake_change change) + { + u8 buf[ACPI_WAKEUP_NUM_ARGS] = {change, source, 0, 0x40}; +@@ -121,6 +128,7 @@ static void mec5035_init(struct device *dev) + /* Unconditionally use this argument for now as this setting + is probably the most sensible default out of the 3 choices. */ + mec5035_mouse_touchpad(TP_PS2_MOUSE); ++ mec5035_power_button_route(HOST); + + pc_keyboard_init(NO_AUX_DEVICE); + +diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h +index 8d4fded28b..51422598c4 100644 +--- a/src/ec/dell/mec5035/mec5035.h ++++ b/src/ec/dell/mec5035/mec5035.h +@@ -11,6 +11,7 @@ + enum mec5035_cmd { + CMD_MOUSE_TP = 0x1a, + CMD_RADIO_CTRL = 0x2b, ++ CMD_POWER_BUTTON_TO_HOST = 0x3e, + CMD_ACPI_WAKEUP_CHANGE = 0x4a, + CMD_SLEEP_ENABLE = 0x64, + CMD_CPU_OK = 0xc2, +@@ -36,6 +37,11 @@ enum ec_radio_state { + RADIO_ON + }; + ++enum ec_power_button_route { ++ EC = 0, ++ HOST ++}; ++ + #define ACPI_WAKEUP_NUM_ARGS 4 + enum ec_wake_change { + WAKE_OFF = 0, +@@ -55,6 +61,7 @@ u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting); + void mec5035_cpu_ok(void); + void mec5035_early_init(void); + void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state); ++void mec5035_power_button_route(enum ec_power_button_route target); + void mec5035_change_wake(u8 source, enum ec_wake_change change); + void mec5035_sleep_enable(void); + +-- +2.39.5 + diff --git a/config/coreboot/default/patches/0051-haswell-NRI-Add-range-tracking-library.patch b/config/coreboot/default/patches/0051-haswell-NRI-Add-range-tracking-library.patch deleted file mode 100644 index 2ec35e26..00000000 --- a/config/coreboot/default/patches/0051-haswell-NRI-Add-range-tracking-library.patch +++ /dev/null @@ -1,222 +0,0 @@ -From ca6d92e13278832dfddbe7dcb4cbefa5861041e8 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 00:56:00 +0200 -Subject: [PATCH 51/65] haswell NRI: Add range tracking library - -Implement a small library used to keep track of passing ranges. This -will be used by 1D training algorithms when margining some parameter. - -Change-Id: I8718e85165160afd7c0c8e730b5ce6c9c00f8a60 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../intel/haswell/native_raminit/ranges.c | 109 ++++++++++++++++++ - .../intel/haswell/native_raminit/ranges.h | 68 +++++++++++ - 3 files changed, 178 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/ranges.c - create mode 100644 src/northbridge/intel/haswell/native_raminit/ranges.h - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index 6e1b365602..2da950771d 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -9,6 +9,7 @@ romstage-y += io_comp_control.c - romstage-y += memory_map.c - romstage-y += raminit_main.c - romstage-y += raminit_native.c -+romstage-y += ranges.c - romstage-y += reut.c - romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c -diff --git a/src/northbridge/intel/haswell/native_raminit/ranges.c b/src/northbridge/intel/haswell/native_raminit/ranges.c -new file mode 100644 -index 0000000000..cdebc1fa66 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/ranges.c -@@ -0,0 +1,109 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+ -+#include "ranges.h" -+ -+void linear_record_pass( -+ struct linear_train_data *const data, -+ const bool pass, -+ const int32_t value, -+ const int32_t start, -+ const int32_t step) -+{ -+ /* If this is the first time, initialize all values */ -+ if (value == start) { -+ /* -+ * If value passed, create a zero-length region for the current value, -+ * which may be extended as long as the successive values are passing. -+ * -+ * Otherwise, create a zero-length range for the preceding value. This -+ * range cannot be extended by other passing values, which is desired. -+ */ -+ data->current.start = start - (pass ? 0 : step); -+ data->current.end = data->current.start; -+ data->largest = data->current; -+ } else if (pass) { -+ /* If this pass is not contiguous, it belongs to a new region */ -+ if (data->current.end != (value - step)) -+ data->current.start = value; -+ -+ /* Update end of current region */ -+ data->current.end = value; -+ -+ /* Update largest region */ -+ if (range_width(data->current) > range_width(data->largest)) -+ data->largest = data->current; -+ } -+} -+ -+void phase_record_pass( -+ struct phase_train_data *const data, -+ const bool pass, -+ const int32_t value, -+ const int32_t start, -+ const int32_t step) -+{ -+ /* If this is the first time, initialize all values */ -+ if (value == start) { -+ /* -+ * If value passed, create a zero-length region for the current value, -+ * which may be extended as long as the successive values are passing. -+ * -+ * Otherwise, create a zero-length range for the preceding value. This -+ * range cannot be extended by other passing values, which is desired. -+ */ -+ data->current.start = start - (pass ? 0 : step); -+ data->current.end = data->current.start; -+ data->largest = data->current; -+ data->initial = data->current; -+ return; -+ } -+ if (!pass) -+ return; -+ -+ /* Update initial region */ -+ if (data->initial.end == (value - step)) -+ data->initial.end = value; -+ -+ /* If this pass is not contiguous, it belongs to a new region */ -+ if (data->current.end != (value - step)) -+ data->current.start = value; -+ -+ /* Update end of current region */ -+ data->current.end = value; -+ -+ /* Update largest region */ -+ if (range_width(data->current) > range_width(data->largest)) -+ data->largest = data->current; -+} -+ -+void phase_append_initial_to_current( -+ struct phase_train_data *const data, -+ const int32_t start, -+ const int32_t step) -+{ -+ /* If initial region is valid and does not overlap, append it */ -+ if (data->initial.start == start && data->initial.end != data->current.end) -+ data->current.end += step + range_width(data->initial); -+ -+ /* Update largest region */ -+ if (range_width(data->current) > range_width(data->largest)) -+ data->largest = data->current; -+} -+ -+void phase_append_current_to_initial( -+ struct phase_train_data *const data, -+ const int32_t start, -+ const int32_t step) -+{ -+ /* If initial region is valid and does not overlap, append it */ -+ if (data->initial.start == start && data->initial.end != data->current.end) { -+ data->initial.start -= (step + range_width(data->current)); -+ data->current = data->initial; -+ } -+ -+ /* Update largest region */ -+ if (range_width(data->current) > range_width(data->largest)) -+ data->largest = data->current; -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/ranges.h b/src/northbridge/intel/haswell/native_raminit/ranges.h -new file mode 100644 -index 0000000000..235392df96 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/ranges.h -@@ -0,0 +1,68 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#ifndef HASWELL_RAMINIT_RANGES_H -+#define HASWELL_RAMINIT_RANGES_H -+ -+#include -+ -+/* -+ * Many algorithms shmoo some parameter to determine the largest passing -+ * range. Provide a common implementation to avoid redundant boilerplate. -+ */ -+struct passing_range { -+ int32_t start; -+ int32_t end; -+}; -+ -+/* Structure for linear parameters, such as roundtrip delays */ -+struct linear_train_data { -+ struct passing_range current; -+ struct passing_range largest; -+}; -+ -+/* -+ * Phase ranges are "circular": the first and last indices are contiguous. -+ * To correctly determine the largest passing range, one has to combine -+ * the initial range and the current range when processing the last index. -+ */ -+struct phase_train_data { -+ struct passing_range initial; -+ struct passing_range current; -+ struct passing_range largest; -+}; -+ -+static inline int32_t range_width(const struct passing_range range) -+{ -+ return range.end - range.start; -+} -+ -+static inline int32_t range_center(const struct passing_range range) -+{ -+ return range.start + range_width(range) / 2; -+} -+ -+void linear_record_pass( -+ struct linear_train_data *data, -+ bool pass, -+ int32_t value, -+ int32_t start, -+ int32_t step); -+ -+void phase_record_pass( -+ struct phase_train_data *data, -+ bool pass, -+ int32_t value, -+ int32_t start, -+ int32_t step); -+ -+void phase_append_initial_to_current( -+ struct phase_train_data *data, -+ int32_t start, -+ int32_t step); -+ -+void phase_append_current_to_initial( -+ struct phase_train_data *data, -+ int32_t start, -+ int32_t step); -+ -+#endif --- -2.39.5 - diff --git a/config/coreboot/default/patches/0052-haswell-NRI-Add-library-to-change-margins.patch b/config/coreboot/default/patches/0052-haswell-NRI-Add-library-to-change-margins.patch deleted file mode 100644 index ffd76fc4..00000000 --- a/config/coreboot/default/patches/0052-haswell-NRI-Add-library-to-change-margins.patch +++ /dev/null @@ -1,294 +0,0 @@ -From f6d7bd420640a9ccb137113d69b97bc13fe6b0da Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 01:11:03 +0200 -Subject: [PATCH 52/65] haswell NRI: Add library to change margins - -Implement a library to change Rx/Tx margins. It will be expanded later. - -Change-Id: I0b55aba428d8b4d4e16d2fbdec57235ce3ce8adf -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/change_margin.c | 154 ++++++++++++++++++ - .../haswell/native_raminit/raminit_native.h | 50 ++++++ - .../intel/haswell/registers/mchbar.h | 9 + - 4 files changed, 214 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/change_margin.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index 2da950771d..ebe9e9b762 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -1,5 +1,6 @@ - ## SPDX-License-Identifier: GPL-2.0-or-later - -+romstage-y += change_margin.c - romstage-y += configure_mc.c - romstage-y += ddr3.c - romstage-y += jedec_reset.c -diff --git a/src/northbridge/intel/haswell/native_raminit/change_margin.c b/src/northbridge/intel/haswell/native_raminit/change_margin.c -new file mode 100644 -index 0000000000..055c666eee ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/change_margin.c -@@ -0,0 +1,154 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+void update_rxt( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const uint8_t rank, -+ const uint8_t byte, -+ const enum rxt_subfield subfield, -+ const int32_t value) -+{ -+ union ddr_data_rx_train_rank_reg rxt = { -+ .rcven = ctrl->rcven[channel][rank][byte], -+ .dqs_p = ctrl->rxdqsp[channel][rank][byte], -+ .rx_eq = ctrl->rx_eq[channel][rank][byte], -+ .dqs_n = ctrl->rxdqsn[channel][rank][byte], -+ .vref = ctrl->rxvref[channel][rank][byte], -+ }; -+ int32_t new_value; -+ switch (subfield) { -+ case RXT_RCVEN: -+ new_value = clamp_s32(0, value, 511); -+ rxt.rcven = new_value; -+ break; -+ case RXT_RXDQS_P: -+ new_value = clamp_s32(0, value, 63); -+ rxt.dqs_p = new_value; -+ break; -+ case RXT_RX_EQ: -+ new_value = clamp_s32(0, value, 31); -+ rxt.rx_eq = new_value; -+ break; -+ case RXT_RXDQS_N: -+ new_value = clamp_s32(0, value, 63); -+ rxt.dqs_n = new_value; -+ break; -+ case RXT_RX_VREF: -+ new_value = clamp_s32(-32, value, 31); -+ rxt.vref = new_value; -+ break; -+ case RXT_RXDQS_BOTH: -+ new_value = clamp_s32(0, value, 63); -+ rxt.dqs_p = new_value; -+ rxt.dqs_n = new_value; -+ break; -+ case RXT_RESTORE: -+ new_value = value; -+ break; -+ default: -+ die("%s: Unhandled subfield index %u\n", __func__, subfield); -+ } -+ -+ if (new_value != value) { -+ printk(BIOS_ERR, "%s: Overflow for subfield %u: %d ---> %d\n", -+ __func__, subfield, value, new_value); -+ } -+ mchbar_write32(RX_TRAIN_ch_r_b(channel, rank, byte), rxt.raw); -+ download_regfile(ctrl, channel, false, rank, REG_FILE_USE_RANK, byte, true, false); -+} -+ -+void update_txt( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const uint8_t rank, -+ const uint8_t byte, -+ const enum txt_subfield subfield, -+ const int32_t value) -+{ -+ union ddr_data_tx_train_rank_reg txt = { -+ .dq_delay = ctrl->tx_dq[channel][rank][byte], -+ .dqs_delay = ctrl->txdqs[channel][rank][byte], -+ .tx_eq = ctrl->tx_eq[channel][rank][byte], -+ }; -+ int32_t new_value; -+ switch (subfield) { -+ case TXT_TX_DQ: -+ new_value = clamp_s32(0, value, 511); -+ txt.dq_delay = new_value; -+ break; -+ case TXT_TXDQS: -+ new_value = clamp_s32(0, value, 511); -+ txt.dqs_delay = new_value; -+ break; -+ case TXT_TX_EQ: -+ new_value = clamp_s32(0, value, 63); -+ txt.tx_eq = new_value; -+ break; -+ case TXT_DQDQS_OFF: -+ new_value = value; -+ txt.dqs_delay += new_value; -+ txt.dq_delay += new_value; -+ break; -+ case TXT_RESTORE: -+ new_value = value; -+ break; -+ default: -+ die("%s: Unhandled subfield index %u\n", __func__, subfield); -+ } -+ if (new_value != value) { -+ printk(BIOS_ERR, "%s: Overflow for subfield %u: %d ---> %d\n", -+ __func__, subfield, value, new_value); -+ } -+ mchbar_write32(TX_TRAIN_ch_r_b(channel, rank, byte), txt.raw); -+ download_regfile(ctrl, channel, false, rank, REG_FILE_USE_RANK, byte, false, true); -+} -+ -+void download_regfile( -+ struct sysinfo *ctrl, -+ const uint8_t channel, -+ const bool multicast, -+ const uint8_t rank, -+ const enum regfile_mode regfile, -+ const uint8_t byte, -+ const bool read_rf_rd, -+ const bool read_rf_wr) -+{ -+ union reut_seq_base_addr_reg reut_seq_base_addr; -+ switch (regfile) { -+ case REG_FILE_USE_START: -+ reut_seq_base_addr.raw = mchbar_read64(REUT_ch_SEQ_ADDR_START(channel)); -+ break; -+ case REG_FILE_USE_CURRENT: -+ reut_seq_base_addr.raw = mchbar_read64(REUT_ch_SEQ_ADDR_CURRENT(channel)); -+ break; -+ case REG_FILE_USE_RANK: -+ reut_seq_base_addr.raw = 0; -+ if (rank >= NUM_SLOTRANKS) -+ die("%s: bad rank %u\n", __func__, rank); -+ break; -+ default: -+ die("%s: Invalid regfile param %u\n", __func__, regfile); -+ } -+ uint8_t phys_rank = rank; -+ if (reut_seq_base_addr.raw != 0) { -+ /* Map REUT logical rank to physical rank */ -+ const uint32_t log_to_phys = mchbar_read32(REUT_ch_RANK_LOG_TO_PHYS(channel)); -+ phys_rank = log_to_phys >> (reut_seq_base_addr.rank_addr * 4) & 0x3; -+ } -+ uint32_t reg = multicast ? DDR_DATA_ch_CONTROL_0(channel) : DQ_CONTROL_0(channel, byte); -+ union ddr_data_control_0_reg ddr_data_control_0 = { -+ .raw = mchbar_read32(reg), -+ }; -+ ddr_data_control_0.read_rf_rd = read_rf_rd; -+ ddr_data_control_0.read_rf_wr = read_rf_wr; -+ ddr_data_control_0.read_rf_rank = phys_rank; -+ mchbar_write32(reg, ddr_data_control_0.raw); -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index f029e7f076..8707257b27 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -118,6 +118,30 @@ enum test_stop { - ALSOE = 3, /* Stop on all lanes error */ - }; - -+enum rxt_subfield { -+ RXT_RCVEN = 0, -+ RXT_RXDQS_P = 1, -+ RXT_RX_EQ = 2, -+ RXT_RXDQS_N = 3, -+ RXT_RX_VREF = 4, -+ RXT_RXDQS_BOTH = 5, -+ RXT_RESTORE = 255, -+}; -+ -+enum txt_subfield { -+ TXT_TX_DQ = 0, -+ TXT_TXDQS = 1, -+ TXT_TX_EQ = 2, -+ TXT_DQDQS_OFF = 3, -+ TXT_RESTORE = 255, -+}; -+ -+enum regfile_mode { -+ REG_FILE_USE_RANK, /* Used when changing parameters for each rank */ -+ REG_FILE_USE_START, /* Used when changing parameters before the test */ -+ REG_FILE_USE_CURRENT, /* Used when changing parameters after the test */ -+}; -+ - struct wdb_pat { - uint32_t start_ptr; /* Starting pointer in WDB */ - uint32_t stop_ptr; /* Stopping pointer in WDB */ -@@ -451,6 +475,32 @@ uint8_t select_reut_ranks(struct sysinfo *ctrl, uint8_t channel, uint8_t rankmas - void run_mpr_io_test(bool clear_errors); - uint8_t run_io_test(struct sysinfo *ctrl, uint8_t chanmask, uint8_t dq_pat, bool clear_errors); - -+void update_rxt( -+ struct sysinfo *ctrl, -+ uint8_t channel, -+ uint8_t rank, -+ uint8_t byte, -+ enum rxt_subfield subfield, -+ int32_t value); -+ -+void update_txt( -+ struct sysinfo *ctrl, -+ uint8_t channel, -+ uint8_t rank, -+ uint8_t byte, -+ enum txt_subfield subfield, -+ int32_t value); -+ -+void download_regfile( -+ struct sysinfo *ctrl, -+ uint8_t channel, -+ bool multicast, -+ uint8_t rank, -+ enum regfile_mode regfile, -+ uint8_t byte, -+ bool read_rf_rd, -+ bool read_rf_wr); -+ - uint8_t get_rx_bias(const struct sysinfo *ctrl); - - uint8_t get_tCWL(uint32_t mem_clock_mhz); -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 817a9f8bf8..a81559bb1e 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -15,7 +15,11 @@ - /* Register definitions */ - - /* DDR DATA per-channel per-bytelane */ -+#define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte) -+#define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte) -+ - #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) -+#define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) - - /* DDR CKE per-channel */ - #define DDR_CKE_ch_CMD_COMP_OFFSET(ch) _DDRIO_C_R_B(0x1204, ch, 0, 0) -@@ -38,6 +42,9 @@ - #define DDR_SCRAMBLE_ch(ch) (0x2000 + 4 * (ch)) - #define DDR_SCRAM_MISC_CONTROL 0x2008 - -+/* DDR DATA per-channel multicast */ -+#define DDR_DATA_ch_CONTROL_0(ch) _DDRIO_C_R_B(0x3074, ch, 0, 0) -+ - /* DDR CMDN/CMDS per-channel (writes go to both CMDN and CMDS fubs) */ - #define DDR_CMD_ch_COMP_OFFSET(ch) _DDRIO_C_R_B(0x3204, ch, 0, 0) - #define DDR_CMD_ch_PI_CODING(ch) _DDRIO_C_R_B(0x3208, ch, 0, 0) -@@ -147,6 +154,8 @@ - - #define REUT_ch_SEQ_ADDR_WRAP(ch) (0x48e8 + 8 * (ch)) - -+#define REUT_ch_SEQ_ADDR_CURRENT(ch) (0x48f8 + 8 * (ch)) -+ - #define REUT_ch_SEQ_MISC_CTL(ch) (0x4908 + 4 * (ch)) - - #define REUT_ch_SEQ_ADDR_INC_CTL(ch) (0x4910 + 8 * (ch)) --- -2.39.5 - diff --git a/config/coreboot/default/patches/0053-haswell-NRI-Add-RcvEn-training.patch b/config/coreboot/default/patches/0053-haswell-NRI-Add-RcvEn-training.patch deleted file mode 100644 index fdb8d270..00000000 --- a/config/coreboot/default/patches/0053-haswell-NRI-Add-RcvEn-training.patch +++ /dev/null @@ -1,708 +0,0 @@ -From d3cd9ccb7d2eed7ecd5bcdc33d73a5e28b029dba Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 00:05:41 +0200 -Subject: [PATCH 53/65] haswell NRI: Add RcvEn training - -Implement the RcvEn (Receive Enable) calibration procedure. - -Change-Id: Ifbfa520f3e0486c56d0988ce67af2ddb9cf29888 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 14 + - .../haswell/native_raminit/reg_structs.h | 13 + - .../native_raminit/train_receive_enable.c | 561 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 3 + - 6 files changed, 593 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/train_receive_enable.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index ebe9e9b762..e2fbfb4211 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -16,3 +16,4 @@ romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c - romstage-y += testing_io.c - romstage-y += timings_refresh.c -+romstage-y += train_receive_enable.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 5e4674957d..7d444659c3 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = { - { configure_memory_map, true, "MEMMAP", }, - { do_jedec_init, true, "JEDECINIT", }, - { pre_training, true, "PRETRAIN", }, -+ { train_receive_enable, true, "RCVET", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 8707257b27..eaaaedad1e 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -43,6 +43,9 @@ - #define NUM_WDB_CL_MUX_SEEDS 3 - #define NUM_CADB_MUX_SEEDS 3 - -+/* Specified in PI ticks. 64 PI ticks == 1 qclk */ -+#define tDQSCK_DRIFT 64 -+ - /* ZQ calibration types */ - enum { - ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ -@@ -189,6 +192,7 @@ enum raminit_status { - RAMINIT_STATUS_MPLL_INIT_FAILURE, - RAMINIT_STATUS_POLL_TIMEOUT, - RAMINIT_STATUS_REUT_ERROR, -+ RAMINIT_STATUS_RCVEN_FAILURE, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -271,6 +275,10 @@ struct sysinfo { - - union ddr_data_vref_adjust_reg dimm_vref; - -+ uint8_t io_latency[NUM_CHANNELS][NUM_SLOTRANKS]; -+ uint8_t rt_latency[NUM_CHANNELS][NUM_SLOTRANKS]; -+ uint32_t rt_io_comp[NUM_CHANNELS]; -+ - uint32_t data_offset_train[NUM_CHANNELS][NUM_LANES]; - uint32_t data_offset_comp[NUM_CHANNELS][NUM_LANES]; - -@@ -345,6 +353,11 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl) - memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train)); - } - -+static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint8_t byte) -+{ -+ return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte)); -+} -+ - /* Number of ticks to wait in units of 69.841279 ns (citation needed) */ - static inline void tick_delay(const uint32_t delay) - { -@@ -400,6 +413,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl); - enum raminit_status configure_mc(struct sysinfo *ctrl); - enum raminit_status configure_memory_map(struct sysinfo *ctrl); - enum raminit_status do_jedec_init(struct sysinfo *ctrl); -+enum raminit_status train_receive_enable(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index b943259b91..b099f4bb82 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -297,6 +297,19 @@ union ddr_scram_misc_control_reg { - uint32_t raw; - }; - -+union sc_io_latency_reg { -+ struct __packed { -+ uint32_t iolat_rank0 : 4; // Bits 3:0 -+ uint32_t iolat_rank1 : 4; // Bits 7:4 -+ uint32_t iolat_rank2 : 4; // Bits 11:8 -+ uint32_t iolat_rank3 : 4; // Bits 15:12 -+ uint32_t rt_iocomp : 6; // Bits 21:16 -+ uint32_t : 9; // Bits 30:22 -+ uint32_t dis_rt_clk_gate : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ - union mcscheds_cbit_reg { - struct __packed { - uint32_t dis_opp_cas : 1; // Bits 0:0 -diff --git a/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c -new file mode 100644 -index 0000000000..576c6bc21e ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c -@@ -0,0 +1,561 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+#include "ranges.h" -+ -+#define RCVEN_PLOT RAM_DEBUG -+ -+static enum raminit_status change_rcven_timing(struct sysinfo *ctrl, const uint8_t channel) -+{ -+ int16_t max_rcven = -4096; -+ int16_t min_rcven = 4096; -+ int16_t max_rcven_rank[NUM_SLOTRANKS]; -+ int16_t min_rcven_rank[NUM_SLOTRANKS]; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ max_rcven_rank[rank] = max_rcven; -+ min_rcven_rank[rank] = min_rcven; -+ } -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ int16_t new_rcven = ctrl->rcven[channel][rank][byte]; -+ new_rcven -= ctrl->io_latency[channel][rank] * 64; -+ if (max_rcven_rank[rank] < new_rcven) -+ max_rcven_rank[rank] = new_rcven; -+ -+ if (min_rcven_rank[rank] > new_rcven) -+ min_rcven_rank[rank] = new_rcven; -+ } -+ if (max_rcven < max_rcven_rank[rank]) -+ max_rcven = max_rcven_rank[rank]; -+ -+ if (min_rcven > min_rcven_rank[rank]) -+ min_rcven = min_rcven_rank[rank]; -+ } -+ -+ /* -+ * Determine how far we are from the ideal center point for RcvEn timing. -+ * (PiIdeal - AveRcvEn) / 64 is the ideal number of cycles we should have -+ * for IO latency. command training will reduce this by 64, so plan for -+ * that now in the ideal value. Round to closest integer. -+ */ -+ const int16_t rre_pi_ideal = 256 + 64; -+ const int16_t pi_reserve = 64; -+ const int16_t rcven_center = (max_rcven + min_rcven) / 2; -+ const int8_t iolat_target = DIV_ROUND_CLOSEST(rre_pi_ideal - rcven_center, 64); -+ -+ int8_t io_g_offset = 0; -+ int8_t io_lat[NUM_SLOTRANKS] = { 0 }; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ io_lat[rank] = iolat_target; -+ -+ /* Check for RcvEn underflow/overflow */ -+ const int16_t rcven_lower = 64 * io_lat[rank] + min_rcven_rank[rank]; -+ if (rcven_lower < pi_reserve) -+ io_lat[rank] += DIV_ROUND_UP(pi_reserve - rcven_lower, 64); -+ -+ const int16_t rcven_upper = 64 * io_lat[rank] + max_rcven_rank[rank]; -+ if (rcven_upper > 511 - pi_reserve) -+ io_lat[rank] -= DIV_ROUND_UP(rcven_upper - (511 - pi_reserve), 64); -+ -+ /* Check for IO latency over/underflow */ -+ if (io_lat[rank] - io_g_offset > 14) -+ io_g_offset = io_lat[rank] - 14; -+ -+ if (io_lat[rank] - io_g_offset < 1) -+ io_g_offset = io_lat[rank] - 1; -+ -+ const int8_t cycle_offset = io_lat[rank] - ctrl->io_latency[channel][rank]; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ ctrl->rcven[channel][rank][byte] += 64 * cycle_offset; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ } -+ -+ /* Calculate new IO comp latency */ -+ union sc_io_latency_reg sc_io_lat = { -+ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)), -+ }; -+ -+ /* Check if we are underflowing or overflowing this field */ -+ if (io_g_offset < 0 && sc_io_lat.rt_iocomp < -io_g_offset) { -+ printk(BIOS_ERR, "%s: IO COMP underflow\n", __func__); -+ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset); -+ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ if (io_g_offset > 0 && io_g_offset > 0x3f - sc_io_lat.rt_iocomp) { -+ printk(BIOS_ERR, "%s: IO COMP overflow\n", __func__); -+ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset); -+ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ sc_io_lat.rt_iocomp += io_g_offset; -+ ctrl->rt_io_comp[channel] = sc_io_lat.rt_iocomp; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (ctrl->rankmap[channel] & BIT(rank)) -+ ctrl->io_latency[channel][rank] = io_lat[rank] - io_g_offset; -+ -+ const uint8_t shift = rank * 4; -+ sc_io_lat.raw &= ~(0xf << shift); -+ sc_io_lat.raw |= ctrl->io_latency[channel][rank] << shift; -+ } -+ mchbar_write32(SC_IO_LATENCY_ch(channel), sc_io_lat.raw); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+#define RL_START (256 + 24) -+#define RL_STOP (384 + 24) -+#define RL_STEP 8 -+ -+#define RE_NUM_SAMPLES 6 -+ -+static enum raminit_status verify_high_region(const int32_t center, const int32_t lwidth) -+{ -+ if (center > RL_STOP) { -+ /* Check if center of high was found where it should be */ -+ printk(BIOS_ERR, "RcvEn: Center of high (%d) higher than expected\n", center); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ if (lwidth <= 32) { -+ /* Check if width is large enough */ -+ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too small\n", lwidth); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ if (lwidth >= 96) { -+ /* Since we're calibrating a phase, a too large region is a problem */ -+ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too large\n", lwidth); -+ return RAMINIT_STATUS_RCVEN_FAILURE; -+ } -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+static void program_io_latency(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank) -+{ -+ const uint8_t shift = rank * 4; -+ const uint8_t iolat = ctrl->io_latency[channel][rank]; -+ mchbar_clrsetbits32(SC_IO_LATENCY_ch(channel), 0xf << shift, iolat << shift); -+} -+ -+static void program_rl_delays(struct sysinfo *ctrl, const uint8_t rank, const uint16_t rl_delay) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ update_rxt(ctrl, channel, rank, byte, RXT_RCVEN, rl_delay); -+ } -+} -+ -+static bool sample_dqs(const uint8_t channel, const uint8_t byte) -+{ -+ return (get_data_train_feedback(channel, byte) & 0x1ff) >= BIT(RE_NUM_SAMPLES - 1); -+} -+ -+enum raminit_status train_receive_enable(struct sysinfo *ctrl) -+{ -+ const struct reut_box reut_addr = { -+ .col = { -+ .start = 0, -+ .stop = 1023, -+ .inc_rate = 0, -+ .inc_val = 1, -+ }, -+ }; -+ const struct wdb_pat wdb_pattern = { -+ .start_ptr = 0, -+ .stop_ptr = 9, -+ .inc_rate = 32, -+ .dq_pattern = BASIC_VA, -+ }; -+ -+ const uint16_t bytemask = BIT(ctrl->lanes) - 1; -+ const uint8_t fine_step = 1; -+ -+ const uint8_t rt_delta = is_hsw_ult() ? 4 : 2; -+ const uint8_t rt_io_comp = 21 + rt_delta; -+ const uint8_t rt_latency = 16 + rt_delta; -+ setup_io_test( -+ ctrl, -+ ctrl->chanmap, -+ PAT_RD, -+ 2, -+ RE_NUM_SAMPLES + 1, -+ &reut_addr, -+ 0, -+ &wdb_pattern, -+ 0, -+ 8); -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ union ddr_data_control_2_reg data_control_2 = { -+ .raw = ctrl->dq_control_2[channel][byte], -+ }; -+ data_control_2.force_rx_on = 1; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); -+ } -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ if (ctrl->lpddr) { -+ /** -+ * W/A for b4618574 - @todo: remove for HSW ULT C0 -+ * Can't have force_odt_on together with leaker, disable LPDDR -+ * mode during this training step. lpddr_mode is restored -+ * at the end of this function from the host structure. -+ */ -+ data_control_0.lpddr_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ data_control_0.force_odt_on = 1; -+ data_control_0.rl_training_mode = 1; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ mchbar_write32(SC_IO_LATENCY_ch(channel), (union sc_io_latency_reg) { -+ .rt_iocomp = rt_io_comp, -+ }.raw); -+ } -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!does_rank_exist(ctrl, rank)) -+ continue; -+ -+ /* -+ * Set initial roundtrip latency values. Assume -4 QCLK for worst board -+ * layout. This is calculated as HW_ROUNDT_LAT_DEFAULT_VALUE plus: -+ * -+ * DDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + N-mode value * 2 -+ * LPDDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + tDQSCK_max -+ * -+ * N-mode is 3 during training mode. Both channels use the same timings. -+ */ -+ /** TODO: differs for LPDDR **/ -+ const uint32_t tmp = MAX(ctrl->multiplier, 4) + 5 + 2 * ctrl->tAA; -+ const uint32_t initial_rt_latency = MIN(rt_latency + tmp, 0x3f); -+ -+ uint8_t chanmask = 0; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ chanmask |= select_reut_ranks(ctrl, channel, BIT(rank)); -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ ctrl->io_latency[channel][rank] = 0; -+ mchbar_write8(SC_ROUNDT_LAT_ch(channel) + rank, initial_rt_latency); -+ ctrl->rt_latency[channel][rank] = initial_rt_latency; -+ } -+ -+ printk(BIOS_DEBUG, "Rank %u\n", rank); -+ printk(BIOS_DEBUG, "Steps 1 and 2: Find middle of high region\n"); -+ printk(RCVEN_PLOT, "Byte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(RCVEN_PLOT, "%u ", byte); -+ } -+ printk(RCVEN_PLOT, "\nRcvEn\n"); -+ struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ for (uint16_t rl_delay = RL_START; rl_delay < RL_STOP; rl_delay += RL_STEP) { -+ printk(RCVEN_PLOT, " % 3d", rl_delay); -+ program_rl_delays(ctrl, rank, rl_delay); -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const bool high = sample_dqs(channel, byte); -+ printk(RCVEN_PLOT, high ? ". " : "# "); -+ phase_record_pass( -+ ®ion_data[channel][byte], -+ high, -+ rl_delay, -+ RL_START, -+ RL_STEP); -+ } -+ } -+ printk(RCVEN_PLOT, "\n"); -+ } -+ printk(RCVEN_PLOT, "\n"); -+ printk(BIOS_DEBUG, "Update RcvEn timing to be in the center of high region\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\n", -+ channel, rank); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct phase_train_data *const curr_data = -+ ®ion_data[channel][byte]; -+ phase_append_current_to_initial(curr_data, RL_START, RL_STEP); -+ const int32_t lwidth = range_width(curr_data->largest); -+ const int32_t center = range_center(curr_data->largest); -+ printk(BIOS_DEBUG, " B%u: \t%d\t%d\t%d\t%d\n", -+ byte, -+ curr_data->largest.start, -+ curr_data->largest.end, -+ lwidth, -+ center); -+ -+ status = verify_high_region(center, lwidth); -+ if (status) { -+ printk(BIOS_ERR, -+ "RcvEn problems on channel %u, byte %u\n", -+ channel, byte); -+ goto clean_up; -+ } -+ ctrl->rcven[channel][rank][byte] = center; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+ printk(BIOS_DEBUG, "Step 3: Quarter preamble - Walk backwards\n"); -+ printk(RCVEN_PLOT, "Byte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(RCVEN_PLOT, "%u ", byte); -+ } -+ printk(RCVEN_PLOT, "\nIOLAT\n"); -+ bool done = false; -+ while (!done) { -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ done = true; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, " %2u\t", ctrl->io_latency[channel][rank]); -+ uint16_t highs = 0; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const bool high = sample_dqs(channel, byte); -+ printk(RCVEN_PLOT, high ? "H " : "L "); -+ if (high) -+ highs |= BIT(byte); -+ } -+ if (!highs) -+ continue; -+ -+ done = false; -+ -+ /* If all bytes sample high, adjust timing globally */ -+ if (highs == bytemask && ctrl->io_latency[channel][rank] < 14) { -+ ctrl->io_latency[channel][rank] += 2; -+ ctrl->io_latency[channel][rank] %= 16; -+ program_io_latency(ctrl, channel, rank); -+ continue; -+ } -+ -+ /* Otherwise, adjust individual bytes */ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ if (!(highs & BIT(byte))) -+ continue; -+ -+ if (ctrl->rcven[channel][rank][byte] < 128) { -+ printk(BIOS_ERR, -+ "RcvEn underflow: walking backwards\n"); -+ printk(BIOS_ERR, -+ "For channel %u, rank %u, byte %u\n", -+ channel, rank, byte); -+ status = RAMINIT_STATUS_RCVEN_FAILURE; -+ goto clean_up; -+ } -+ ctrl->rcven[channel][rank][byte] -= 128; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ } -+ printk(RCVEN_PLOT, "\n"); -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "\nC%u: Preamble\n", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ printk(BIOS_DEBUG, -+ " B%u: %u\n", byte, ctrl->rcven[channel][rank][byte]); -+ } -+ } -+ printk(BIOS_DEBUG, "\n"); -+ -+ printk(BIOS_DEBUG, "Step 4: Add 1 qclk\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ ctrl->rcven[channel][rank][byte] += 64; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ } -+ printk(BIOS_DEBUG, "\n"); -+ -+ printk(BIOS_DEBUG, "Step 5: Walk forward to find rising edge\n"); -+ printk(RCVEN_PLOT, "Byte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RCVEN_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(RCVEN_PLOT, "%u ", byte); -+ } -+ printk(RCVEN_PLOT, "\n inc\n"); -+ uint16_t ch_result[NUM_CHANNELS] = { 0 }; -+ uint8_t inc_preamble[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ for (uint8_t inc = 0; inc < 64; inc += fine_step) { -+ printk(RCVEN_PLOT, " %2u\t", inc); -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ done = true; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ if (ch_result[channel] & BIT(byte)) { -+ /* Skip bytes that are already done */ -+ printk(RCVEN_PLOT, ". "); -+ continue; -+ } -+ const bool pass = sample_dqs(channel, byte); -+ printk(RCVEN_PLOT, pass ? ". " : "# "); -+ if (pass) { -+ ch_result[channel] |= BIT(byte); -+ continue; -+ } -+ ctrl->rcven[channel][rank][byte] += fine_step; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ inc_preamble[channel][byte] = inc; -+ } -+ printk(RCVEN_PLOT, "\t"); -+ if (ch_result[channel] != bytemask) -+ done = false; -+ } -+ printk(RCVEN_PLOT, "\n"); -+ if (done) -+ break; -+ } -+ printk(BIOS_DEBUG, "\n"); -+ if (!done) { -+ printk(BIOS_ERR, "Error: Preamble edge not found for all bytes\n"); -+ printk(BIOS_ERR, "The final RcvEn results are as follows:\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_ERR, "Channel %u Rank %u: preamble\n", -+ channel, rank); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ printk(BIOS_ERR, " Byte %u: %u%s\n", byte, -+ ctrl->rcven[channel][rank][byte], -+ (ch_result[channel] ^ bytemask) & BIT(byte) -+ ? "" -+ : " *** Check this byte! ***"); -+ } -+ } -+ status = RAMINIT_STATUS_RCVEN_FAILURE; -+ goto clean_up; -+ } -+ -+ printk(BIOS_DEBUG, "Step 6: center on preamble and clean up rank\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "C%u: Preamble increment\n", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ /* -+ * For Traditional, pull in RcvEn by 64. For ULT, take the DQS -+ * drift into account to the specified guardband: tDQSCK_DRIFT. -+ */ -+ ctrl->rcven[channel][rank][byte] -= tDQSCK_DRIFT; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ printk(BIOS_DEBUG, " B%u: %u %u\n", byte, -+ ctrl->rcven[channel][rank][byte], -+ inc_preamble[channel][byte]); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+clean_up: -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ if (ctrl->lpddr) { -+ /** -+ * W/A for b4618574 - @todo: remove for HSW ULT C0 -+ * Can't have force_odt_on together with leaker, disable LPDDR mode for -+ * this training step. This write will disable force_odt_on while still -+ * keeping LPDDR mode disabled. Second write will restore LPDDR mode. -+ */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.lpddr_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ mchbar_write32(DQ_CONTROL_2(channel, byte), -+ ctrl->dq_control_2[channel][byte]); -+ } -+ } -+ io_reset(); -+ if (status) -+ return status; -+ -+ printk(BIOS_DEBUG, "Step 7: Sync IO latency across all ranks\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ status = change_rcven_timing(ctrl, channel); -+ if (status) -+ return status; -+ } -+ printk(BIOS_DEBUG, "\nFinal Receive Enable and IO latency settings:\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ const union sc_io_latency_reg sc_io_latency = { -+ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)), -+ }; -+ printk(BIOS_DEBUG, " C%u.R%u: IOLAT = %u rt_iocomp = %u\n", channel, -+ rank, ctrl->io_latency[channel][rank], sc_io_latency.rt_iocomp); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ printk(BIOS_DEBUG, " B%u: %u\n", byte, -+ ctrl->rcven[channel][rank][byte]); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ } -+ return status; -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index a81559bb1e..9172d4f2b0 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -18,6 +18,8 @@ - #define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte) - #define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte) - -+#define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) -+ - #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) - #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) - -@@ -100,6 +102,7 @@ - #define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch) - #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch) - #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch) -+#define SC_IO_LATENCY_ch(ch) _MCMAIN_C(0x4028, ch) - - #define REUT_ch_PAT_WDB_CL_MUX_CFG(ch) _MCMAIN_C(0x4040, ch) - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0054-haswell-NRI-Add-function-to-change-margins.patch b/config/coreboot/default/patches/0054-haswell-NRI-Add-function-to-change-margins.patch deleted file mode 100644 index 58cc9d82..00000000 --- a/config/coreboot/default/patches/0054-haswell-NRI-Add-function-to-change-margins.patch +++ /dev/null @@ -1,272 +0,0 @@ -From dbf0fc28bbb939fe5a90c991b752f790828d462d Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 11:58:59 +0200 -Subject: [PATCH 54/65] haswell NRI: Add function to change margins - -Implement a function to change margin parameters. Haswell provides a -register to apply an offset to margin parameters during training, so -make use of it. There are other margin parameters that have not been -implemented yet, as they are not needed for now and special handling -is needed to provide offset training functionality. - -Change-Id: I5392380e13de3c44e77b7bc9f3b819e2661d1e2d -Signed-off-by: Angel Pons ---- - .../haswell/native_raminit/change_margin.c | 136 ++++++++++++++++++ - .../haswell/native_raminit/raminit_native.h | 39 +++++ - .../haswell/native_raminit/reg_structs.h | 12 ++ - .../intel/haswell/registers/mchbar.h | 1 + - 4 files changed, 188 insertions(+) - -diff --git a/src/northbridge/intel/haswell/native_raminit/change_margin.c b/src/northbridge/intel/haswell/native_raminit/change_margin.c -index 055c666eee..299c44a6b0 100644 ---- a/src/northbridge/intel/haswell/native_raminit/change_margin.c -+++ b/src/northbridge/intel/haswell/native_raminit/change_margin.c -@@ -1,5 +1,6 @@ - /* SPDX-License-Identifier: GPL-2.0-or-later */ - -+#include - #include - #include - #include -@@ -152,3 +153,138 @@ void download_regfile( - ddr_data_control_0.read_rf_rank = phys_rank; - mchbar_write32(reg, ddr_data_control_0.raw); - } -+ -+static void update_data_offset_train( -+ struct sysinfo *ctrl, -+ const uint8_t param, -+ const uint8_t en_multicast, -+ const uint8_t channel_in, -+ const uint8_t rank, -+ const uint8_t byte_in, -+ const bool update_ctrl, -+ const enum regfile_mode regfile, -+ const uint32_t value) -+{ -+ bool is_rd = false; -+ bool is_wr = false; -+ switch (param) { -+ case RdT: -+ case RdV: -+ case RcvEna: -+ is_rd = true; -+ break; -+ case WrT: -+ case WrDqsT: -+ is_wr = true; -+ break; -+ default: -+ die("%s: Invalid margin parameter %u\n", __func__, param); -+ } -+ if (en_multicast) { -+ mchbar_write32(DDR_DATA_OFFSET_TRAIN, value); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ download_regfile(ctrl, channel, true, rank, regfile, 0, is_rd, is_wr); -+ if (update_ctrl) { -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ ctrl->data_offset_train[channel][byte] = value; -+ } -+ } -+ } else { -+ mchbar_write32(DDR_DATA_OFFSET_TRAIN_ch_b(channel_in, byte_in), value); -+ download_regfile(ctrl, channel_in, false, rank, regfile, byte_in, is_rd, is_wr); -+ if (update_ctrl) -+ ctrl->data_offset_train[channel_in][byte_in] = value; -+ } -+} -+ -+static uint32_t get_max_margin(const enum margin_parameter param) -+{ -+ switch (param) { -+ case RcvEna: -+ case RdT: -+ case WrT: -+ case WrDqsT: -+ return MAX_POSSIBLE_TIME; -+ case RdV: -+ return MAX_POSSIBLE_VREF; -+ default: -+ die("%s: Invalid margin parameter %u\n", __func__, param); -+ } -+} -+ -+void change_margin( -+ struct sysinfo *ctrl, -+ const enum margin_parameter param, -+ const int32_t value0, -+ const bool en_multicast, -+ const uint8_t channel, -+ const uint8_t rank, -+ const uint8_t byte, -+ const bool update_ctrl, -+ const enum regfile_mode regfile) -+{ -+ /** FIXME: Remove this **/ -+ if (rank == 0xff) -+ die("%s: rank is 0xff\n", __func__); -+ -+ if (!en_multicast && !does_ch_exist(ctrl, channel)) -+ die("%s: Tried to change margin of empty channel %u\n", __func__, channel); -+ -+ const uint32_t max_value = get_max_margin(param); -+ const int32_t v0 = clamp_s32(-max_value, value0, max_value); -+ -+ union ddr_data_offset_train_reg ddr_data_offset_train = { -+ .raw = en_multicast ? 0 : ctrl->data_offset_train[channel][byte], -+ }; -+ bool update_offset_train = false; -+ switch (param) { -+ case RcvEna: -+ ddr_data_offset_train.rcven = v0; -+ update_offset_train = true; -+ break; -+ case RdT: -+ ddr_data_offset_train.rx_dqs = v0; -+ update_offset_train = true; -+ break; -+ case WrT: -+ ddr_data_offset_train.tx_dq = v0; -+ update_offset_train = true; -+ break; -+ case WrDqsT: -+ ddr_data_offset_train.tx_dqs = v0; -+ update_offset_train = true; -+ break; -+ case RdV: -+ ddr_data_offset_train.vref = v0; -+ update_offset_train = true; -+ break; -+ default: -+ die("%s: Invalid margin parameter %u\n", __func__, param); -+ } -+ if (update_offset_train) { -+ update_data_offset_train( -+ ctrl, -+ param, -+ en_multicast, -+ channel, -+ rank, -+ byte, -+ update_ctrl, -+ regfile, -+ ddr_data_offset_train.raw); -+ } -+} -+ -+void change_1d_margin_multicast( -+ struct sysinfo *ctrl, -+ const enum margin_parameter param, -+ const int32_t value0, -+ const uint8_t rank, -+ const bool update_ctrl, -+ const enum regfile_mode regfile) -+{ -+ change_margin(ctrl, param, value0, true, 0, rank, 0, update_ctrl, regfile); -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index eaaaedad1e..1c8473056b 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -36,6 +36,18 @@ - - #define RTTNOM_MASK (BIT(9) | BIT(6) | BIT(2)) - -+/* Margin parameter limits */ -+#define MAX_POSSIBLE_TIME 31 -+#define MAX_POSSIBLE_VREF 54 -+ -+#define MAX_POSSIBLE_BOTH MAX_POSSIBLE_VREF -+ -+#define MIN_TIME (-MAX_POSSIBLE_TIME) -+#define MAX_TIME (MAX_POSSIBLE_TIME) -+ -+#define MIN_VREF (-MAX_POSSIBLE_VREF) -+#define MAX_VREF (MAX_POSSIBLE_VREF) -+ - #define BASIC_VA_PAT_SPREAD_8 0x01010101 - - #define WDB_CACHE_LINE_SIZE 8 -@@ -46,6 +58,14 @@ - /* Specified in PI ticks. 64 PI ticks == 1 qclk */ - #define tDQSCK_DRIFT 64 - -+enum margin_parameter { -+ RcvEna, -+ RdT, -+ WrT, -+ WrDqsT, -+ RdV, -+}; -+ - /* ZQ calibration types */ - enum { - ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */ -@@ -515,6 +535,25 @@ void download_regfile( - bool read_rf_rd, - bool read_rf_wr); - -+void change_margin( -+ struct sysinfo *ctrl, -+ const enum margin_parameter param, -+ const int32_t value0, -+ const bool en_multicast, -+ const uint8_t channel, -+ const uint8_t rank, -+ const uint8_t byte, -+ const bool update_ctrl, -+ const enum regfile_mode regfile); -+ -+void change_1d_margin_multicast( -+ struct sysinfo *ctrl, -+ const enum margin_parameter param, -+ const int32_t value0, -+ const uint8_t rank, -+ const bool update_ctrl, -+ const enum regfile_mode regfile); -+ - uint8_t get_rx_bias(const struct sysinfo *ctrl); - - uint8_t get_tCWL(uint32_t mem_clock_mhz); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index b099f4bb82..a0e36ed082 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -25,6 +25,18 @@ union ddr_data_tx_train_rank_reg { - uint32_t raw; - }; - -+union ddr_data_offset_train_reg { -+ struct __packed { -+ int32_t rcven : 6; // Bits 5:0 -+ int32_t rx_dqs : 6; // Bits 11:6 -+ int32_t tx_dq : 6; // Bits 17:12 -+ int32_t tx_dqs : 6; // Bits 23:18 -+ int32_t vref : 7; // Bits 30:24 -+ int32_t : 1; // Bits 31:31 -+ }; -+ uint32_t raw; -+}; -+ - union ddr_data_control_0_reg { - struct __packed { - uint32_t rx_training_mode : 1; // Bits 0:0 -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 9172d4f2b0..0acafbc826 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -21,6 +21,7 @@ - #define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) - - #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) -+#define DDR_DATA_OFFSET_TRAIN_ch_b(ch, byte) _DDRIO_C_R_B(0x0070, ch, 0, byte) - #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) - - /* DDR CKE per-channel */ --- -2.39.5 - diff --git a/config/coreboot/default/patches/0055-haswell-NRI-Add-read-MPR-training.patch b/config/coreboot/default/patches/0055-haswell-NRI-Add-read-MPR-training.patch deleted file mode 100644 index be0ddd13..00000000 --- a/config/coreboot/default/patches/0055-haswell-NRI-Add-read-MPR-training.patch +++ /dev/null @@ -1,332 +0,0 @@ -From 0a557e3d09a9a53bb085c43e6bdb99fa4cd78b85 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 11:35:49 +0200 -Subject: [PATCH 55/65] haswell NRI: Add read MPR training - -Implement read training using DDR3 MPR (Multi-Purpose Register). - -Change-Id: Id17cb2c4c399ac9bcc937b595b58f863c152461b -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 4 + - .../haswell/native_raminit/train_read_mpr.c | 241 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 2 +- - 5 files changed, 248 insertions(+), 1 deletion(-) - create mode 100644 src/northbridge/intel/haswell/native_raminit/train_read_mpr.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index e2fbfb4211..c442be0728 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -16,4 +16,5 @@ romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c - romstage-y += testing_io.c - romstage-y += timings_refresh.c -+romstage-y += train_read_mpr.c - romstage-y += train_receive_enable.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 7d444659c3..264d1468f5 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -61,6 +61,7 @@ static const struct task_entry cold_boot[] = { - { do_jedec_init, true, "JEDECINIT", }, - { pre_training, true, "PRETRAIN", }, - { train_receive_enable, true, "RCVET", }, -+ { train_read_mpr, true, "RDMPRT", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 1c8473056b..7a486479ea 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -28,6 +28,8 @@ - /* Always use 12 legs for emphasis (not trained) */ - #define TXEQFULLDRV (3 << 4) - -+#define LOOPCOUNT_INFINITE 0xff -+ - /* DDR3 mode register bits */ - #define MR0_DLL_RESET BIT(8) - -@@ -213,6 +215,7 @@ enum raminit_status { - RAMINIT_STATUS_POLL_TIMEOUT, - RAMINIT_STATUS_REUT_ERROR, - RAMINIT_STATUS_RCVEN_FAILURE, -+ RAMINIT_STATUS_RMPR_FAILURE, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -434,6 +437,7 @@ enum raminit_status configure_mc(struct sysinfo *ctrl); - enum raminit_status configure_memory_map(struct sysinfo *ctrl); - enum raminit_status do_jedec_init(struct sysinfo *ctrl); - enum raminit_status train_receive_enable(struct sysinfo *ctrl); -+enum raminit_status train_read_mpr(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c -new file mode 100644 -index 0000000000..ade1e36148 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c -@@ -0,0 +1,241 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+#include "ranges.h" -+ -+#define RMPR_START (-32) -+#define RMPR_STOP (32) -+#define RMPR_STEP 1 -+ -+#define RMPR_MIN_WIDTH 12 -+ -+#define RMPR_PLOT RAM_DEBUG -+ -+/* -+ * Clear rx_training_mode. For LPDDR, we first need to disable odt_samp_extend_en, -+ * then disable rx_training_mode, and finally re-enable odt_samp_extend_en. -+ */ -+static void clear_rx_training_mode(struct sysinfo *ctrl, const uint8_t channel) -+{ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ mchbar_write32(DQ_CONTROL_2(channel, byte), ctrl->dq_control_2[channel][byte]); -+ -+ if (ctrl->lpddr) { -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = mchbar_read32(DDR_DATA_ch_CONTROL_0(channel)), -+ }; -+ data_control_0.odt_samp_extend_en = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ tick_delay(1); -+ data_control_0.rx_training_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ tick_delay(1); -+ } -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); -+} -+ -+static void set_rxdqs_edges_to_midpoint(struct sysinfo *ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ update_rxt(ctrl, channel, rank, byte, RXT_RXDQS_BOTH, 32); -+ } -+ } -+} -+ -+static void enter_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank) -+{ -+ /* Program MR3 and mask RAS/WE to prevent scheduler from issuing non-read commands */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ if (!ctrl->lpddr) -+ reut_issue_mrs(ctrl, channel, BIT(rank), 3, 1 << 2); -+ -+ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { -+ .raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)), -+ }; -+ reut_misc_odt_ctrl.mpr_train_ddr_on = 1; -+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw); -+ } -+} -+ -+static void leave_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /* -+ * The mpr_train_ddr_on bit will force a special command. -+ * Therefore, clear it before issuing the MRS command. -+ */ -+ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { -+ .raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)), -+ }; -+ reut_misc_odt_ctrl.mpr_train_ddr_on = 0; -+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw); -+ if (!ctrl->lpddr) -+ reut_issue_mrs(ctrl, channel, BIT(rank), 3, 0 << 2); -+ } -+} -+ -+enum raminit_status train_read_mpr(struct sysinfo *ctrl) -+{ -+ set_rxdqs_edges_to_midpoint(ctrl); -+ clear_data_offset_train_all(ctrl); -+ setup_io_test_mpr(ctrl, ctrl->chanmap, LOOPCOUNT_INFINITE, NSOE); -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!does_rank_exist(ctrl, rank)) -+ continue; -+ -+ printk(BIOS_DEBUG, "Rank %u\n", rank); -+ printk(RMPR_PLOT, "Channel"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RMPR_PLOT, "\t%u\t\t", channel); -+ } -+ printk(RMPR_PLOT, "\nByte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RMPR_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(RMPR_PLOT, "%u ", byte); -+ } -+ enter_mpr_train_ddr_mode(ctrl, rank); -+ struct linear_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) -+ select_reut_ranks(ctrl, channel, BIT(rank)); -+ -+ printk(RMPR_PLOT, "\nDqsDelay\n"); -+ int8_t dqs_delay; -+ for (dqs_delay = RMPR_START; dqs_delay < RMPR_STOP; dqs_delay += RMPR_STEP) { -+ printk(RMPR_PLOT, "% 5d", dqs_delay); -+ const enum regfile_mode regfile = REG_FILE_USE_START; -+ /* Looks like MRC uses rank 0 here, but it feels wrong */ -+ change_1d_margin_multicast(ctrl, RdT, dqs_delay, rank, false, regfile); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ union ddr_data_control_2_reg data_control_2 = { -+ .raw = ctrl->dq_control_2[channel][byte], -+ }; -+ data_control_2.force_bias_on = 1; -+ data_control_2.force_rx_on = 1; -+ data_control_2.leaker_comp = 0; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), -+ data_control_2.raw); -+ } -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.rx_training_mode = 1; -+ data_control_0.force_odt_on = !ctrl->lpddr; -+ data_control_0.en_read_preamble = 0; -+ data_control_0.odt_samp_extend_en = ctrl->lpddr; -+ const uint32_t reg_offset = DDR_DATA_ch_CONTROL_0(channel); -+ mchbar_write32(reg_offset, data_control_0.raw); -+ } -+ run_mpr_io_test(false); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(RMPR_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ uint32_t fb = get_data_train_feedback(channel, byte); -+ const bool pass = fb == 1; -+ printk(RMPR_PLOT, pass ? ". " : "# "); -+ linear_record_pass( -+ ®ion_data[channel][byte], -+ pass, -+ dqs_delay, -+ RMPR_START, -+ RMPR_STEP); -+ } -+ } -+ printk(RMPR_PLOT, "\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ clear_rx_training_mode(ctrl, channel); -+ } -+ io_reset(); -+ } -+ printk(RMPR_PLOT, "\n"); -+ leave_mpr_train_ddr_mode(ctrl, rank); -+ clear_data_offset_train_all(ctrl); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\tRxDqsPN\n", -+ channel, rank); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct linear_train_data *data = ®ion_data[channel][byte]; -+ const int32_t lwidth = range_width(data->largest); -+ if (lwidth <= RMPR_MIN_WIDTH) { -+ printk(BIOS_ERR, -+ "Bad eye (lwidth %d <= min %d) for byte %u\n", -+ lwidth, RMPR_MIN_WIDTH, byte); -+ status = RAMINIT_STATUS_RMPR_FAILURE; -+ } -+ /* -+ * The MPR center may not be ideal on certain platforms for -+ * unknown reasons. If so, adjust it with a magical number. -+ * For Haswell, the magical number is zero. Hell knows why. -+ */ -+ const int32_t center = range_center(data->largest); -+ ctrl->rxdqsp[channel][rank][byte] = center - RMPR_START; -+ ctrl->rxdqsn[channel][rank][byte] = center - RMPR_START; -+ printk(BIOS_DEBUG, " B%u: \t%d\t%d\t%d\t%d\t%u\n", byte, -+ data->largest.start, data->largest.end, lwidth, -+ center, ctrl->rxdqsp[channel][rank][byte]); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ } -+ -+ /* -+ * Now program the DQS center values on populated ranks. data is taken from -+ * the host struct. We need to do it after all ranks are trained, because we -+ * need to keep the same DQS value on all ranks during the training procedure. -+ */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ } -+ change_1d_margin_multicast(ctrl, RdT, 0, 0, false, REG_FILE_USE_CURRENT); -+ io_reset(); -+ return status; -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 0acafbc826..6a31d3a32c 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -122,7 +122,7 @@ - #define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch) - - #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) -- -+#define REUT_ch_MISC_ODT_CTRL(ch) _MCMAIN_C(0x4194, ch) - #define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch) - #define REUT_ch_PAT_CADB_MRS(ch) _MCMAIN_C(0x419c, ch) - #define REUT_ch_PAT_CADB_MUX_CTRL(ch) _MCMAIN_C(0x41a0, ch) --- -2.39.5 - diff --git a/config/coreboot/default/patches/0056-haswell-NRI-Add-write-leveling.patch b/config/coreboot/default/patches/0056-haswell-NRI-Add-write-leveling.patch deleted file mode 100644 index 0791fb80..00000000 --- a/config/coreboot/default/patches/0056-haswell-NRI-Add-write-leveling.patch +++ /dev/null @@ -1,689 +0,0 @@ -From e8f50deac2a671f7ec3958b376c37dd6b9bad5bd Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 12:56:04 +0200 -Subject: [PATCH 56/65] haswell NRI: Add write leveling - -Implement JEDEC write leveling, which is done in two steps. The first -step uses the JEDEC procedure to do "fine" write leveling, i.e. align -the DQS phase to the clock signal. The second step performs a regular -read-write test to correct "coarse" cycle errors. - -Change-Id: I27678523fe22c38173a688e2a4751c259a20f009 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 10 + - .../train_jedec_write_leveling.c | 581 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 2 + - 5 files changed, 595 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index c442be0728..40c2f5e014 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -16,5 +16,6 @@ romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c - romstage-y += testing_io.c - romstage-y += timings_refresh.c -+romstage-y += train_jedec_write_leveling.c - romstage-y += train_read_mpr.c - romstage-y += train_receive_enable.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 264d1468f5..1ff23be615 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -62,6 +62,7 @@ static const struct task_entry cold_boot[] = { - { pre_training, true, "PRETRAIN", }, - { train_receive_enable, true, "RCVET", }, - { train_read_mpr, true, "RDMPRT", }, -+ { train_jedec_write_leveling, true, "JWRL", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 7a486479ea..d6b11b9d3c 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -60,6 +60,9 @@ - /* Specified in PI ticks. 64 PI ticks == 1 qclk */ - #define tDQSCK_DRIFT 64 - -+/* Maximum additional latency */ -+#define MAX_ADD_DELAY 2 -+ - enum margin_parameter { - RcvEna, - RdT, -@@ -216,6 +219,7 @@ enum raminit_status { - RAMINIT_STATUS_REUT_ERROR, - RAMINIT_STATUS_RCVEN_FAILURE, - RAMINIT_STATUS_RMPR_FAILURE, -+ RAMINIT_STATUS_JWRL_FAILURE, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -381,6 +385,11 @@ static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint - return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte)); - } - -+static inline uint16_t get_byte_group_errors(const uint8_t channel) -+{ -+ return mchbar_read32(4 + REUT_ch_ERR_MISC_STATUS(channel)) & 0x1ff; -+} -+ - /* Number of ticks to wait in units of 69.841279 ns (citation needed) */ - static inline void tick_delay(const uint32_t delay) - { -@@ -438,6 +447,7 @@ enum raminit_status configure_memory_map(struct sysinfo *ctrl); - enum raminit_status do_jedec_init(struct sysinfo *ctrl); - enum raminit_status train_receive_enable(struct sysinfo *ctrl); - enum raminit_status train_read_mpr(struct sysinfo *ctrl); -+enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c -new file mode 100644 -index 0000000000..ef6483e2bd ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c -@@ -0,0 +1,581 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+#include "ranges.h" -+ -+#define JWLC_PLOT RAM_DEBUG -+#define JWRL_PLOT RAM_DEBUG -+ -+static void reset_dram_dll(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank) -+{ -+ const uint16_t mr0reg = ctrl->mr0[channel][rank / 2]; -+ reut_issue_mrs(ctrl, channel, BIT(rank), 0, mr0reg | MR0_DLL_RESET); -+} -+ -+static void program_wdb_pattern(struct sysinfo *ctrl, const bool invert) -+{ -+ /* Pattern to keep DQ-DQS simple but detect any failures. Same as NHM/WSM. */ -+ const uint8_t pat[4][2] = { -+ { 0x00, 0xff }, -+ { 0xff, 0x00 }, -+ { 0xc3, 0x3c }, -+ { 0x3c, 0xc3 }, -+ }; -+ const uint8_t pmask[2][8] = { -+ { 0, 0, 1, 1, 1, 1, 0, 0 }, -+ { 1, 1, 0, 0, 0, 0, 1, 1 }, -+ }; -+ for (uint8_t s = 0; s < ARRAY_SIZE(pat); s++) -+ write_wdb_fixed_pat(ctrl, pat[s], pmask[invert], ARRAY_SIZE(pmask[invert]), s); -+} -+ -+static int16_t set_add_delay(uint32_t *add_delay, uint8_t rank, int8_t target_off) -+{ -+ const uint8_t shift = rank * 2; -+ if (target_off > MAX_ADD_DELAY) { -+ *add_delay &= ~(3 << shift); -+ *add_delay |= MAX_ADD_DELAY << shift; -+ return 128 * (target_off - MAX_ADD_DELAY); -+ } else if (target_off < 0) { -+ *add_delay &= ~(3 << shift); -+ *add_delay |= 0 << shift; -+ return 128 * target_off; -+ } else { -+ *add_delay &= ~(3 << shift); -+ *add_delay |= target_off << shift; -+ return 0; -+ } -+} -+ -+static enum raminit_status train_jedec_write_leveling_cleanup(struct sysinfo *ctrl) -+{ -+ const struct reut_box reut_addr = { -+ .col = { -+ .start = 0, -+ .stop = 1023, -+ .inc_val = 1, -+ }, -+ }; -+ const struct wdb_pat wdb_pattern = { -+ .start_ptr = 0, -+ .stop_ptr = 3, -+ .inc_rate = 1, -+ .dq_pattern = BASIC_VA, -+ }; -+ const int8_t offsets[] = { 0, 1, -1, 2, 3 }; -+ const int8_t dq_offsets[] = { 0, -10, 10, -5, 5, -15, 15 }; -+ const uint8_t dq_offset_max = ARRAY_SIZE(dq_offsets); -+ -+ /* Set LFSR seeds to be sequential */ -+ program_wdb_lfsr(ctrl, true); -+ setup_io_test( -+ ctrl, -+ ctrl->chanmap, -+ PAT_WR_RD, -+ 2, -+ 4, -+ &reut_addr, -+ NSOE, -+ &wdb_pattern, -+ 0, -+ 0); -+ -+ const union reut_pat_wdb_cl_mux_cfg_reg reut_wdb_cl_mux_cfg = { -+ .mux_0_control = REUT_MUX_BTBUFFER, -+ .mux_1_control = REUT_MUX_BTBUFFER, -+ .mux_2_control = REUT_MUX_BTBUFFER, -+ .ecc_data_source_sel = 1, -+ }; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_CFG(channel), reut_wdb_cl_mux_cfg.raw); -+ } -+ -+ int8_t byte_off[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ uint32_t add_delay[NUM_CHANNELS] = { 0 }; -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ bool invert = false; -+ const uint16_t valid_byte_mask = BIT(ctrl->lanes) - 1; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ uint8_t chanmask = 0; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) -+ chanmask |= select_reut_ranks(ctrl, channel, BIT(rank)); -+ -+ if (!chanmask) -+ continue; -+ -+ printk(BIOS_DEBUG, "Rank %u\n", rank); -+ printk(JWLC_PLOT, "Channel"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWLC_PLOT, "\t\t%u\t", channel); -+ } -+ printk(JWLC_PLOT, "\nByte\t"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWLC_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(JWLC_PLOT, "%u ", byte); -+ } -+ printk(JWLC_PLOT, "\nDelay DqOffset"); -+ bool done = false; -+ int8_t byte_sum[NUM_CHANNELS] = { 0 }; -+ uint16_t byte_pass[NUM_CHANNELS] = { 0 }; -+ for (uint8_t off = 0; off < ARRAY_SIZE(offsets); off++) { -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ const int16_t global_byte_off = -+ set_add_delay(&add_delay[channel], rank, offsets[off]); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ update_txt(ctrl, channel, rank, byte, TXT_DQDQS_OFF, -+ global_byte_off); -+ } -+ mchbar_write32(SC_WR_ADD_DELAY_ch(channel), -+ add_delay[channel]); -+ } -+ /* Reset FIFOs and DRAM DLL (Micron workaround) */ -+ if (!ctrl->lpddr) { -+ io_reset(); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ reset_dram_dll(ctrl, channel, rank); -+ } -+ udelay(1); -+ } -+ for (uint8_t dq_offset = 0; dq_offset < dq_offset_max; dq_offset++) { -+ printk(JWLC_PLOT, "\n% 3d\t% 3d", -+ offsets[off], dq_offsets[dq_offset]); -+ change_1d_margin_multicast( -+ ctrl, -+ WrT, -+ dq_offsets[dq_offset], -+ rank, -+ false, -+ REG_FILE_USE_RANK); -+ -+ /* -+ * Re-program the WDB pattern. Change the pattern -+ * for the next test to avoid false pass issues. -+ */ -+ program_wdb_pattern(ctrl, invert); -+ invert = !invert; -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ done = true; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWLC_PLOT, "\t"); -+ uint16_t result = get_byte_group_errors(channel); -+ result &= valid_byte_mask; -+ -+ /* Skip bytes that have failed or already passed */ -+ const uint16_t skip_me = result | byte_pass[channel]; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const bool pass = result & BIT(byte); -+ printk(JWLC_PLOT, pass ? "# " : ". "); -+ if (skip_me & BIT(byte)) -+ continue; -+ -+ byte_pass[channel] |= BIT(byte); -+ byte_off[channel][byte] = offsets[off]; -+ byte_sum[channel] += offsets[off]; -+ } -+ if (byte_pass[channel] != valid_byte_mask) -+ done = false; -+ } -+ if (done) -+ break; -+ } -+ if (done) -+ break; -+ } -+ printk(BIOS_DEBUG, "\n\n"); -+ if (!done) { -+ printk(BIOS_ERR, "JWLC: Could not find a pass for all bytes\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_ERR, "Channel %u, rank %u fail:", channel, rank); -+ const uint16_t passing_mask = byte_pass[channel]; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ if (BIT(byte) & passing_mask) -+ continue; -+ -+ printk(BIOS_ERR, " %u", byte); -+ } -+ printk(BIOS_ERR, "\n"); -+ } -+ status = RAMINIT_STATUS_JWRL_FAILURE; -+ break; -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /* Refine target offset to make sure it works for all bytes */ -+ int8_t target_off = DIV_ROUND_CLOSEST(byte_sum[channel], ctrl->lanes); -+ int16_t global_byte_off = 0; -+ uint8_t all_good_loops = 0; -+ bool all_good = 0; -+ while (!all_good) { -+ global_byte_off = -+ set_add_delay(&add_delay[channel], rank, target_off); -+ all_good = true; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ int16_t local_offset; -+ local_offset = byte_off[channel][byte] - target_off; -+ local_offset = local_offset * 128 + global_byte_off; -+ const uint16_t tx_dq = ctrl->tx_dq[channel][rank][byte]; -+ if (tx_dq + local_offset >= (512 - 64)) { -+ all_good = false; -+ all_good_loops++; -+ target_off++; -+ break; -+ } -+ const uint16_t txdqs = ctrl->tx_dq[channel][rank][byte]; -+ if (txdqs + local_offset < 96) { -+ all_good = false; -+ all_good_loops++; -+ target_off--; -+ break; -+ } -+ } -+ /* Avoid an infinite loop */ -+ if (all_good_loops > 3) -+ break; -+ } -+ if (!all_good) { -+ printk(BIOS_ERR, "JWLC: Target offset refining failed\n"); -+ status = RAMINIT_STATUS_JWRL_FAILURE; -+ break; -+ } -+ printk(BIOS_DEBUG, "C%u.R%u: Offset\tFinalEdge\n", channel, rank); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ int16_t local_offset; -+ local_offset = byte_off[channel][byte] - target_off; -+ local_offset = local_offset * 128 + global_byte_off; -+ ctrl->tx_dq[channel][rank][byte] += local_offset; -+ ctrl->txdqs[channel][rank][byte] += local_offset; -+ update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0); -+ printk(BIOS_DEBUG, " B%u: %d\t%d\n", byte, local_offset, -+ ctrl->txdqs[channel][rank][byte]); -+ } -+ mchbar_write32(SC_WR_ADD_DELAY_ch(channel), add_delay[channel]); -+ if (!ctrl->lpddr) { -+ reset_dram_dll(ctrl, channel, rank); -+ udelay(1); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+ /* Restore WDB after test */ -+ write_wdb_va_pat(ctrl, 0, BASIC_VA_PAT_SPREAD_8, 8, 0); -+ program_wdb_lfsr(ctrl, false); -+ mchbar_write32(DDR_DATA_OFFSET_TRAIN, 0); -+ -+ /** TODO: Do full JEDEC init instead? **/ -+ io_reset(); -+ return status; -+} -+ -+static enum raminit_status verify_wl_width(const int32_t lwidth) -+{ -+ if (lwidth <= 32) { -+ /* Check if width is valid */ -+ printk(BIOS_ERR, "WrLevel: Width region (%d) too small\n", lwidth); -+ return RAMINIT_STATUS_JWRL_FAILURE; -+ } -+ if (lwidth >= 96) { -+ /* Since we're calibrating a phase, a too large region is a problem */ -+ printk(BIOS_ERR, "WrLevel: Width region (%d) too large\n", lwidth); -+ return RAMINIT_STATUS_JWRL_FAILURE; -+ } -+ return 0; -+} -+ -+enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl) -+{ -+ /* -+ * Enabling WL mode causes DQS to toggle for 1024 QCLK. -+ * Wait for this to stop. Round up to nearest microsecond. -+ */ -+ const bool wl_long_delay = ctrl->lpddr; -+ const uint32_t dqs_toggle_time = wl_long_delay ? 2048 : 1024; -+ const uint32_t wait_time_us = DIV_ROUND_UP(ctrl->qclkps * dqs_toggle_time, 1000 * 1000); -+ -+ const uint16_t wl_start = 192; -+ const uint16_t wl_stop = 192 + 128; -+ const uint16_t wl_step = 2; -+ -+ /* Do not use cached MR values */ -+ const bool save_restore_mrs = ctrl->restore_mrs; -+ ctrl->restore_mrs = 0; -+ -+ /* Propagate delay values (without a write command) */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Propagate delay values from rank 0 to prevent assertion failures in RTL */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.read_rf_rd = 0; -+ data_control_0.read_rf_wr = 1; -+ data_control_0.read_rf_rank = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ union ddr_data_control_2_reg data_control_2 = { -+ .raw = ctrl->dq_control_2[channel][byte], -+ }; -+ data_control_2.force_bias_on = 1; -+ data_control_2.force_rx_on = 0; -+ data_control_2.wl_long_delay = wl_long_delay; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); -+ } -+ } -+ -+ if (ctrl->lpddr) -+ die("%s: Missing LPDDR support\n", __func__); -+ -+ if (!ctrl->lpddr) -+ ddr3_program_mr1(ctrl, 0, 1); -+ -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!does_rank_exist(ctrl, rank)) -+ continue; -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /** TODO: Differs for LPDDR **/ -+ uint16_t mr1reg = ctrl->mr1[channel][rank / 2]; -+ mr1reg &= ~MR1_QOFF_ENABLE; -+ mr1reg |= MR1_WL_ENABLE; -+ if (is_hsw_ult()) { -+ mr1reg &= ~RTTNOM_MASK; -+ mr1reg |= encode_ddr3_rttnom(120); -+ } else if (ctrl->dpc[channel] == 2) { -+ mr1reg &= ~RTTNOM_MASK; -+ mr1reg |= encode_ddr3_rttnom(60); -+ } -+ reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg); -+ -+ /* Assert ODT for myself */ -+ uint8_t odt_matrix = BIT(rank); -+ if (ctrl->dpc[channel] == 2) { -+ /* Assert ODT for non-target DIMM */ -+ const uint8_t other_dimm = ((rank + 2) / 2) & 1; -+ odt_matrix |= BIT(2 * other_dimm); -+ } -+ -+ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { -+ .raw = 0, -+ }; -+ if (ctrl->lpddr) { -+ /* Only one ODT pin for ULT */ -+ reut_misc_odt_ctrl.odt_on = 1; -+ reut_misc_odt_ctrl.odt_override = 1; -+ } else if (!is_hsw_ult()) { -+ reut_misc_odt_ctrl.odt_on = odt_matrix; -+ reut_misc_odt_ctrl.odt_override = 0xf; -+ } -+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw); -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /* -+ * Enable write leveling mode in DDR and propagate delay -+ * values (without a write command). Stay in WL mode. -+ */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.wl_training_mode = 1; -+ data_control_0.tx_pi_on = 1; -+ data_control_0.read_rf_rd = 0; -+ data_control_0.read_rf_wr = 1; -+ data_control_0.read_rf_rank = rank; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ printk(BIOS_DEBUG, "\nRank %u\n", rank); -+ printk(JWRL_PLOT, "Channel\t"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWRL_PLOT, "%u", channel); -+ if (channel > 0) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(JWRL_PLOT, "\t"); -+ } -+ printk(JWRL_PLOT, "\nByte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(JWRL_PLOT, "\t%u", byte); -+ } -+ printk(JWRL_PLOT, "\nWlDelay"); -+ for (uint16_t wl_delay = wl_start; wl_delay < wl_stop; wl_delay += wl_step) { -+ printk(JWRL_PLOT, "\n %3u:", wl_delay); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ update_txt(ctrl, channel, rank, byte, TXT_TXDQS, -+ wl_delay); -+ } -+ } -+ /* Wait for the first burst to finish */ -+ if (wl_delay == wl_start) -+ udelay(wait_time_us); -+ -+ io_reset(); -+ udelay(wait_time_us); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const uint32_t feedback = -+ get_data_train_feedback(channel, byte); -+ const bool pass = (feedback & 0x1ff) >= 16; -+ printk(JWRL_PLOT, "\t%c%u", pass ? '.' : '#', feedback); -+ phase_record_pass( -+ ®ion_data[channel][byte], -+ pass, -+ wl_delay, -+ wl_start, -+ wl_step); -+ } -+ } -+ } -+ printk(JWRL_PLOT, "\n"); -+ printk(BIOS_DEBUG, "\n\tInitSt\tInitEn\tCurrSt\tCurrEn\tLargSt\tLargEn\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "C%u\n", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct phase_train_data *data = ®ion_data[channel][byte]; -+ -+ phase_append_initial_to_current(data, wl_start, wl_step); -+ printk(BIOS_DEBUG, " B%u:\t%d\t%d\t%d\t%d\t%d\t%d\n", -+ byte, -+ data->initial.start, -+ data->initial.end, -+ data->current.start, -+ data->current.end, -+ data->largest.start, -+ data->largest.end); -+ } -+ } -+ -+ /* -+ * Clean up after test. Very coarsely adjust for -+ * any cycle errors. Program values for TxDQS. -+ */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /* Clear ODT before MRS (JEDEC spec) */ -+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), 0); -+ -+ /** TODO: Differs for LPDDR **/ -+ const uint16_t mr1reg = ctrl->mr1[channel][rank / 2] | MR1_QOFF_ENABLE; -+ reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg); -+ -+ printk(BIOS_DEBUG, "\nC%u.R%u: LftEdge Width\n", channel, rank); -+ const bool rank_x16 = ctrl->dimms[channel][rank / 2].data.width == 16; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct phase_train_data *data = ®ion_data[channel][byte]; -+ const int32_t lwidth = range_width(data->largest); -+ int32_t tx_start = data->largest.start; -+ printk(BIOS_DEBUG, " B%u: %d\t%d\n", byte, tx_start, lwidth); -+ status = verify_wl_width(lwidth); -+ if (status) { -+ printk(BIOS_ERR, -+ "WrLevel problems on channel %u, byte %u\n", -+ channel, byte); -+ goto clean_up; -+ } -+ -+ /* Align byte pairs if DIMM is x16 */ -+ if (rank_x16 && (byte & 1)) { -+ const struct phase_train_data *const ref_data = -+ ®ion_data[channel][byte - 1]; -+ -+ if (tx_start > ref_data->largest.start + 64) -+ tx_start -= 128; -+ -+ if (tx_start < ref_data->largest.start - 64) -+ tx_start += 128; -+ } -+ -+ /* Fix for b4618067 - need to add 1 QCLK to DQS PI */ -+ if (is_hsw_ult()) -+ tx_start += 64; -+ -+ assert(tx_start >= 0); -+ ctrl->txdqs[channel][rank][byte] = tx_start; -+ ctrl->tx_dq[channel][rank][byte] = tx_start + 32; -+ update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0); -+ } -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+clean_up: -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ mchbar_write32(DQ_CONTROL_2(channel, byte), -+ ctrl->dq_control_2[channel][byte]); -+ } -+ } -+ if (!ctrl->lpddr) -+ ddr3_program_mr1(ctrl, 0, 0); -+ -+ ctrl->restore_mrs = save_restore_mrs; -+ -+ if (status) -+ return status; -+ -+ /** TODO: If this step fails and dec_wrd is set, clear it and try again **/ -+ return train_jedec_write_leveling_cleanup(ctrl); -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 6a31d3a32c..7c0b5a49de 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -121,6 +121,8 @@ - - #define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch) - -+#define REUT_ch_ERR_MISC_STATUS(ch) _MCMAIN_C(0x40e8, ch) -+ - #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) - #define REUT_ch_MISC_ODT_CTRL(ch) _MCMAIN_C(0x4194, ch) - #define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch) --- -2.39.5 - diff --git a/config/coreboot/default/patches/0057-haswell-NRI-Add-final-raminit-steps.patch b/config/coreboot/default/patches/0057-haswell-NRI-Add-final-raminit-steps.patch deleted file mode 100644 index 3cd8c758..00000000 --- a/config/coreboot/default/patches/0057-haswell-NRI-Add-final-raminit-steps.patch +++ /dev/null @@ -1,570 +0,0 @@ -From 990ee284d48b66f06adb6c43a96439f7628390f5 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sun, 8 May 2022 14:29:05 +0200 -Subject: [PATCH 57/65] haswell NRI: Add final raminit steps - -Implement the remaining raminit steps. Although many training steps are -missing, this is enough to boot on the Asrock B85M Pro4. - -Change-Id: I94f3b65f0218d4da4fda4d84592dfd91f77f8f21 -Signed-off-by: Angel Pons ---- - src/northbridge/intel/haswell/Kconfig | 4 +- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/activate_mc.c | 388 ++++++++++++++++++ - .../haswell/native_raminit/raminit_main.c | 5 +- - .../haswell/native_raminit/raminit_native.c | 5 +- - .../haswell/native_raminit/raminit_native.h | 2 + - .../haswell/native_raminit/reg_structs.h | 12 + - .../intel/haswell/registers/mchbar.h | 7 + - 8 files changed, 416 insertions(+), 8 deletions(-) - create mode 100644 src/northbridge/intel/haswell/native_raminit/activate_mc.c - -diff --git a/src/northbridge/intel/haswell/Kconfig b/src/northbridge/intel/haswell/Kconfig -index 4b83a25bc1..c6ab27184e 100644 ---- a/src/northbridge/intel/haswell/Kconfig -+++ b/src/northbridge/intel/haswell/Kconfig -@@ -11,12 +11,12 @@ config NORTHBRIDGE_INTEL_HASWELL - if NORTHBRIDGE_INTEL_HASWELL - - config USE_NATIVE_RAMINIT -- bool "[NOT WORKING] Use native raminit" -+ bool "[NOT COMPLETE] Use native raminit" - default n - select HAVE_DEBUG_RAM_SETUP - help - Select if you want to use coreboot implementation of raminit rather than -- MRC.bin. Currently incomplete and does not boot. -+ MRC.bin. Currently incomplete and does not support S3 resume. - - config HASWELL_VBOOT_IN_BOOTBLOCK - depends on VBOOT -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index 40c2f5e014..d97da72890 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -1,5 +1,6 @@ - ## SPDX-License-Identifier: GPL-2.0-or-later - -+romstage-y += activate_mc.c - romstage-y += change_margin.c - romstage-y += configure_mc.c - romstage-y += ddr3.c -diff --git a/src/northbridge/intel/haswell/native_raminit/activate_mc.c b/src/northbridge/intel/haswell/native_raminit/activate_mc.c -new file mode 100644 -index 0000000000..78a7ad27ef ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/activate_mc.c -@@ -0,0 +1,388 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+static void update_internal_clocks_on(struct sysinfo *ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ bool clocks_on = false; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const union ddr_data_control_1_reg data_control_1 = { -+ .raw = ctrl->dq_control_1[channel][byte], -+ }; -+ const int8_t o_on = data_control_1.odt_delay; -+ const int8_t s_on = data_control_1.sense_amp_delay; -+ const int8_t o_off = data_control_1.odt_duration; -+ const int8_t s_off = data_control_1.sense_amp_duration; -+ if (o_on + o_off >= 7 || s_on + s_off >= 7) { -+ clocks_on = true; -+ break; -+ } -+ } -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.internal_clocks_on = clocks_on; -+ ctrl->dq_control_0[channel] = data_control_0.raw; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+} -+ -+/* Switch off unused segments of the SDLL to save power */ -+static void update_sdll_length(struct sysinfo *ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ uint8_t max_pi = 0; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ const uint8_t rx_dqs_p = ctrl->rxdqsp[channel][rank][byte]; -+ const uint8_t rx_dqs_n = ctrl->rxdqsn[channel][rank][byte]; -+ max_pi = MAX(max_pi, MAX(rx_dqs_p, rx_dqs_n)); -+ } -+ /* Update SDLL length for power savings */ -+ union ddr_data_control_1_reg data_control_1 = { -+ .raw = ctrl->dq_control_1[channel][byte], -+ }; -+ /* Calculate which segments to turn off */ -+ data_control_1.sdll_segment_disable = (7 - (max_pi >> 3)) & ~1; -+ ctrl->dq_control_1[channel][byte] = data_control_1.raw; -+ mchbar_write32(DQ_CONTROL_1(channel, byte), data_control_1.raw); -+ } -+ } -+} -+ -+static void set_rx_clk_stg_num(struct sysinfo *ctrl, const uint8_t channel) -+{ -+ const uint8_t rcven_drift = ctrl->lpddr ? DIV_ROUND_UP(tDQSCK_DRIFT, ctrl->qclkps) : 1; -+ uint8_t max_rcven = 0; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ max_rcven = MAX(max_rcven, ctrl->rcven[channel][rank][byte] / 64); -+ } -+ const union ddr_data_control_1_reg ddr_data_control_1 = { -+ .raw = ctrl->dq_control_1[channel][0], -+ }; -+ const bool lpddr_long_odt = ddr_data_control_1.lpddr_long_odt_en; -+ const uint8_t rcven_turnoff = max_rcven + 18 + 2 * rcven_drift + lpddr_long_odt; -+ const union ddr_data_control_0_reg ddr_data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ union ddr_data_control_2_reg ddr_data_control_2 = { -+ .raw = ctrl->dq_control_2[channel][byte], -+ }; -+ if (ddr_data_control_0.odt_samp_extend_en) { -+ if (ddr_data_control_2.rx_clk_stg_num < rcven_turnoff) -+ ddr_data_control_2.rx_clk_stg_num = rcven_turnoff; -+ } else { -+ const int8_t o_on = ddr_data_control_1.odt_delay; -+ const int8_t o_off = ddr_data_control_1.odt_duration; -+ ddr_data_control_2.rx_clk_stg_num = MAX(17, o_on + o_off + 14); -+ } -+ ctrl->dq_control_2[channel][byte] = ddr_data_control_2.raw; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), ddr_data_control_2.raw); -+ } -+} -+ -+#define SELF_REFRESH_IDLE_COUNT 0x200 -+ -+static void enter_sr(void) -+{ -+ mchbar_write32(PM_SREF_CONFIG, SELF_REFRESH_IDLE_COUNT | BIT(16)); -+ udelay(1); -+} -+ -+enum power_down_mode { -+ PDM_NO_PD = 0, -+ PDM_APD = 1, -+ PDM_PPD = 2, -+ PDM_PPD_DLL_OFF = 6, -+}; -+ -+static void power_down_config(struct sysinfo *ctrl) -+{ -+ const enum power_down_mode pd_mode = ctrl->lpddr ? PDM_PPD : PDM_PPD_DLL_OFF; -+ mchbar_write32(PM_PDWN_CONFIG, pd_mode << 12 | 0x40); -+} -+ -+static void train_power_modes_post(struct sysinfo *ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Adjust tCPDED and tPRPDEN */ -+ if (ctrl->mem_clock_mhz >= 933) -+ ctrl->tc_bankrank_d[channel].tCPDED = 2; -+ -+ if (ctrl->mem_clock_mhz >= 1066) -+ ctrl->tc_bankrank_d[channel].tPRPDEN = 2; -+ -+ mchbar_write32(TC_BANK_RANK_D_ch(channel), ctrl->tc_bankrank_d[channel].raw); -+ } -+ power_down_config(ctrl); -+ mchbar_write32(MCDECS_CBIT, BIT(30)); /* dis_msg_clk_gate */ -+} -+ -+static uint8_t compute_burst_end_odt_delay(const struct sysinfo *const ctrl) -+{ -+ /* Must be disabled for LPDDR */ -+ if (ctrl->lpddr) -+ return 0; -+ -+ const uint8_t beod = MIN(7, DIV_ROUND_CLOSEST(14300 * 20 / 100, ctrl->qclkps)); -+ if (beod < 3) -+ return 0; -+ -+ if (beod < 4) -+ return 4; -+ -+ return beod; -+} -+ -+static void program_burst_end_odt_delay(struct sysinfo *ctrl) -+{ -+ /* Program burst_end_odt_delay - it should be zero during training steps */ -+ const uint8_t beod = compute_burst_end_odt_delay(ctrl); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ union ddr_data_control_1_reg ddr_data_control_1 = { -+ .raw = ctrl->dq_control_1[channel][byte], -+ }; -+ ddr_data_control_1.burst_end_odt_delay = beod; -+ ctrl->dq_control_1[channel][byte] = ddr_data_control_1.raw; -+ mchbar_write32(DQ_CONTROL_1(channel, byte), ddr_data_control_1.raw); -+ } -+ } -+} -+ -+/* -+ * Return a random value to use for scrambler seeds. Try to use RDRAND -+ * first and fall back to hardcoded values if RDRAND does not succeed. -+ */ -+static uint16_t get_random_number(const uint8_t channel) -+{ -+ /* The RDRAND instruction is only available 100k cycles after reset */ -+ for (size_t i = 0; i < 100000; i++) { -+ uint32_t status; -+ uint32_t random; -+ /** TODO: Clean up asm **/ -+ __asm__ __volatile__( -+ "\n\t .byte 0x0F, 0xC7, 0xF0" -+ "\n\t movl %%eax, %0" -+ "\n\t pushf" -+ "\n\t pop %%eax" -+ "\n\t movl %%eax, %1" -+ : "=m"(random), -+ "=m"(status) -+ : /* No inputs */ -+ : "eax", "cc"); -+ -+ /* Only consider non-zero random values as valid */ -+ if (status & 1 && random) -+ return random; -+ } -+ -+ /* https://xkcd.com/221 */ -+ if (channel) -+ return 0x28f4; -+ else -+ return 0x893e; -+} -+ -+/* Work around "error: 'typeof' applied to a bit-field" */ -+static inline uint32_t max(const uint32_t a, const uint32_t b) -+{ -+ return MAX(a, b); -+} -+ -+enum raminit_status activate_mc(struct sysinfo *ctrl) -+{ -+ const bool enable_scrambling = true; -+ const bool enable_cmd_tristate = true; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ if (enable_scrambling && ctrl->stepping < STEPPING_C0) { -+ /* Make sure tRDRD_(sr, dr, dd) are at least 6 for scrambler W/A */ -+ union tc_bank_rank_a_reg tc_bank_rank_a = { -+ .raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)), -+ }; -+ tc_bank_rank_a.tRDRD_sr = max(tc_bank_rank_a.tRDRD_sr, 6); -+ tc_bank_rank_a.tRDRD_dr = max(tc_bank_rank_a.tRDRD_dr, 6); -+ tc_bank_rank_a.tRDRD_dd = max(tc_bank_rank_a.tRDRD_dd, 6); -+ mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw); -+ } -+ if (enable_scrambling) { -+ const union ddr_scramble_reg ddr_scramble = { -+ .scram_key = get_random_number(channel), -+ .scram_en = 1, -+ }; -+ mchbar_write32(DDR_SCRAMBLE_ch(channel), ddr_scramble.raw); -+ } -+ if (ctrl->tCMD == 1) { -+ /* If we are in 1N mode, enable and set command rate limit to 3 */ -+ union mcmain_command_rate_limit_reg cmd_rate_limit = { -+ .raw = mchbar_read32(COMMAND_RATE_LIMIT_ch(channel)), -+ }; -+ cmd_rate_limit.enable_cmd_limit = 1; -+ cmd_rate_limit.cmd_rate_limit = 3; -+ mchbar_write32(COMMAND_RATE_LIMIT_ch(channel), cmd_rate_limit.raw); -+ } -+ if (enable_cmd_tristate) { -+ /* Enable command tri-state at the end of training */ -+ union tc_bank_rank_a_reg tc_bank_rank_a = { -+ .raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)), -+ }; -+ tc_bank_rank_a.cmd_3st_dis = 0; -+ mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw); -+ } -+ /* Set MC to normal mode and clean the ODT and CKE */ -+ mchbar_write32(REUT_ch_SEQ_CFG(channel), REUT_MODE_NOP << 12); -+ /* Set again the rank occupancy */ -+ mchbar_write8(MC_INIT_STATE_ch(channel), ctrl->rankmap[channel]); -+ if (ctrl->is_ecc) { -+ /* Enable ECC I/O and logic */ -+ union mad_dimm_reg mad_dimm = { -+ .raw = mchbar_read32(MAD_DIMM(channel)), -+ }; -+ mad_dimm.ecc_mode = 3; -+ mchbar_write32(MAD_DIMM(channel), mad_dimm.raw); -+ } -+ } -+ -+ if (!is_hsw_ult()) -+ update_internal_clocks_on(ctrl); -+ -+ update_sdll_length(ctrl); -+ -+ program_burst_end_odt_delay(ctrl); -+ -+ if (is_hsw_ult()) { -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ set_rx_clk_stg_num(ctrl, channel); -+ } -+ /** TODO: Program DDRPL_CR_DDR_TX_DELAY if Memory Trace is enabled **/ -+ } -+ -+ /* Enable periodic COMP */ -+ mchbar_write32(M_COMP, (union pcu_comp_reg) { -+ .comp_interval = COMP_INT, -+ }.raw); -+ -+ /* Enable the power mode before PCU starts working */ -+ train_power_modes_post(ctrl); -+ -+ /* Set idle timer and self refresh enable bits */ -+ enter_sr(); -+ -+ /** FIXME: Do not hardcode power weights and RAPL settings **/ -+ mchbar_write32(0x5888, 0x00000d0d); -+ mchbar_write32(0x5884, 0x00000004); /* 58.2 pJ */ -+ -+ mchbar_write32(0x58e0, 0); -+ mchbar_write32(0x58e4, 0); -+ -+ mchbar_write32(0x5890, 0xffff); -+ mchbar_write32(0x5894, 0xffff); -+ mchbar_write32(0x5898, 0xffff); -+ mchbar_write32(0x589c, 0xffff); -+ mchbar_write32(0x58d0, 0xffff); -+ mchbar_write32(0x58d4, 0xffff); -+ mchbar_write32(0x58d8, 0xffff); -+ mchbar_write32(0x58dc, 0xffff); -+ -+ /* Overwrite thermal parameters */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ mchbar_write32(_MCMAIN_C(0x42ec, channel), 0x0000000f); -+ mchbar_write32(_MCMAIN_C(0x42f0, channel), 0x00000009); -+ mchbar_write32(_MCMAIN_C(0x42f4, channel), 0x00000093); -+ mchbar_write32(_MCMAIN_C(0x42f8, channel), 0x00000087); -+ mchbar_write32(_MCMAIN_C(0x42fc, channel), 0x000000de); -+ -+ /** TODO: Differs for LPDDR **/ -+ mchbar_write32(PM_THRT_CKE_MIN_ch(channel), 0x30); -+ } -+ mchbar_write32(PCU_DDR_PTM_CTL, 0x40); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+static void mc_lockdown(void) -+{ -+ /* Lock memory controller registers */ -+ mchbar_write32(MC_LOCK, 0x8f); -+ -+ /* MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK is set when programming the memory map */ -+ -+ /* Lock memory map registers */ -+ pci_or_config16(HOST_BRIDGE, GGC, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, DPR, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, MESEG_LIMIT, 1 << 10); -+ pci_or_config32(HOST_BRIDGE, REMAPBASE, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, REMAPLIMIT, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, TOM, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, TOUUD, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, BDSM, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, BGSM, 1 << 0); -+ pci_or_config32(HOST_BRIDGE, TOLUD, 1 << 0); -+} -+ -+enum raminit_status raminit_done(struct sysinfo *ctrl) -+{ -+ union mc_init_state_g_reg mc_init_state_g = { -+ .raw = mchbar_read32(MC_INIT_STATE_G), -+ }; -+ mc_init_state_g.refresh_enable = 1; -+ mc_init_state_g.pu_mrc_done = 1; -+ mc_init_state_g.mrc_done = 1; -+ mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw); -+ -+ /* Lock the memory controller to enable normal operation */ -+ mc_lockdown(); -+ -+ /* Poll for mc_init_done_ack to make sure memory initialization is complete */ -+ printk(BIOS_DEBUG, "Waiting for mc_init_done acknowledgement... "); -+ -+ struct stopwatch timer; -+ stopwatch_init_msecs_expire(&timer, 2000); -+ do { -+ mc_init_state_g.raw = mchbar_read32(MC_INIT_STATE_G); -+ -+ /* DRAM will NOT work without the acknowledgement. There is no hope. */ -+ if (stopwatch_expired(&timer)) -+ die("\nTimed out waiting for mc_init_done acknowledgement\n"); -+ -+ } while (mc_init_state_g.mc_init_done_ack == 0); -+ printk(BIOS_DEBUG, "DONE!\n"); -+ -+ /* Provide some data for the graphics driver. Yes, it's hardcoded. */ -+ mchbar_write32(SSKPD + 0, 0x05a2404f); -+ mchbar_write32(SSKPD + 4, 0x140000a0); -+ return RAMINIT_STATUS_SUCCESS; -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 1ff23be615..3a65fb01fb 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -63,6 +63,8 @@ static const struct task_entry cold_boot[] = { - { train_receive_enable, true, "RCVET", }, - { train_read_mpr, true, "RDMPRT", }, - { train_jedec_write_leveling, true, "JWRL", }, -+ { activate_mc, true, "ACTIVATE", }, -+ { raminit_done, true, "RAMINITEND", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -@@ -143,7 +145,4 @@ void raminit_main(const enum raminit_boot_mode bootmode) - - if (status != RAMINIT_STATUS_SUCCESS) - die("Memory initialization was met with utmost failure and misery\n"); -- -- /** TODO: Implement the required magic **/ -- die("NATIVE RAMINIT: More Magic (tm) required.\n"); - } -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c -index 2fed93de5b..5f7ceec222 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c -@@ -199,8 +199,6 @@ void perform_raminit(const int s3resume) - else - me_status = ME_INIT_STATUS_SUCCESS; - -- /** TODO: Remove this once raminit is implemented **/ -- me_status = ME_INIT_STATUS_ERROR; - intel_early_me_init_done(me_status); - } - -@@ -214,7 +212,8 @@ void perform_raminit(const int s3resume) - } - - /* Save training data on non-S3 resumes */ -- if (!s3resume) -+ /** TODO: Enable this once training data is populated **/ -+ if (0 && !s3resume) - save_mrc_data(&md); - - /** TODO: setup_sdram_meminfo **/ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index d6b11b9d3c..a0a913f926 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -448,6 +448,8 @@ enum raminit_status do_jedec_init(struct sysinfo *ctrl); - enum raminit_status train_receive_enable(struct sysinfo *ctrl); - enum raminit_status train_read_mpr(struct sysinfo *ctrl); - enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); -+enum raminit_status activate_mc(struct sysinfo *ctrl); -+enum raminit_status raminit_done(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -index a0e36ed082..0d9aaa1f7c 100644 ---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h -+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h -@@ -294,6 +294,18 @@ union ddr_cke_ctl_controls_reg { - uint32_t raw; - }; - -+union ddr_scramble_reg { -+ struct __packed { -+ uint32_t scram_en : 1; // Bits 0:0 -+ uint32_t scram_key : 16; // Bits 16:1 -+ uint32_t clk_gate_ab : 2; // Bits 18:17 -+ uint32_t clk_gate_c : 2; // Bits 20:19 -+ uint32_t en_dbi_ab : 1; // Bits 21:21 -+ uint32_t : 10; // Bits 31:17 -+ }; -+ uint32_t raw; -+}; -+ - union ddr_scram_misc_control_reg { - struct __packed { - uint32_t wl_wake_cycles : 2; // Bits 1:0 -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 7c0b5a49de..49a215aa71 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -20,6 +20,7 @@ - - #define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) - -+#define DQ_CONTROL_1(ch, byte) _DDRIO_C_R_B(0x0060, ch, 0, byte) - #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte) - #define DDR_DATA_OFFSET_TRAIN_ch_b(ch, byte) _DDRIO_C_R_B(0x0070, ch, 0, byte) - #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte) -@@ -147,6 +148,8 @@ - #define QCLK_ch_LDAT_SDAT(ch) _MCMAIN_C(0x42d4, ch) - #define QCLK_ch_LDAT_DATA_IN_x(ch, x) _MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */ - -+#define PM_THRT_CKE_MIN_ch(ch) _MCMAIN_C(0x4328, ch) -+ - #define REUT_GLOBAL_CTL 0x4800 - #define REUT_GLOBAL_ERR 0x4804 - -@@ -175,6 +178,8 @@ - - #define MCSCHEDS_DFT_MISC 0x4c30 - -+#define PM_PDWN_CONFIG 0x4cb0 -+ - #define REUT_ERR_DATA_STATUS 0x4ce0 - - #define REUT_MISC_CKE_CTRL 0x4d90 -@@ -186,8 +191,10 @@ - #define MAD_CHNL 0x5000 /* Address Decoder Channel Configuration */ - #define MAD_DIMM(ch) (0x5004 + (ch) * 4) - #define MAD_ZR 0x5014 -+#define MCDECS_CBIT 0x501c - #define MC_INIT_STATE_G 0x5030 - #define MRC_REVISION 0x5034 /* MRC Revision */ -+#define PM_SREF_CONFIG 0x5060 - - #define RCOMP_TIMER 0x5084 - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0058-Haswell-NRI-Implement-fast-boot-path.patch b/config/coreboot/default/patches/0058-Haswell-NRI-Implement-fast-boot-path.patch deleted file mode 100644 index b5d04b99..00000000 --- a/config/coreboot/default/patches/0058-Haswell-NRI-Implement-fast-boot-path.patch +++ /dev/null @@ -1,722 +0,0 @@ -From 63e9aa1f998ebd41b4c638fa66bdb1a6272a9e85 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Sat, 13 Apr 2024 01:16:30 +0200 -Subject: [PATCH 58/65] Haswell NRI: Implement fast boot path - -When the memory configuration hasn't changed, there is no need to do -full memory training. Instead, boot firmware can use saved training -data to reinitialise the memory controller and memory. - -Unlike native RAM init for other platforms, Haswell does not save the -main structure (the "mighty ctrl" struct) to flash. Instead, separate -structures define the data to be saved, which can be smaller than the -main structure. - -This makes S3 suspend and resume work: RAM contents MUST be preserved -for a S3 resume to succeed, but RAM training destroys RAM contents. - -Change-Id: I06f6cd39ceecdca104fae89159f28e85cf7ff4e6 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/activate_mc.c | 17 + - .../intel/haswell/native_raminit/ddr3.c | 41 ++ - .../haswell/native_raminit/raminit_main.c | 34 +- - .../haswell/native_raminit/raminit_native.c | 30 +- - .../haswell/native_raminit/raminit_native.h | 18 + - .../haswell/native_raminit/save_restore.c | 387 ++++++++++++++++++ - 7 files changed, 504 insertions(+), 24 deletions(-) - create mode 100644 src/northbridge/intel/haswell/native_raminit/save_restore.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index d97da72890..8fdd17c542 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -13,6 +13,7 @@ romstage-y += raminit_main.c - romstage-y += raminit_native.c - romstage-y += ranges.c - romstage-y += reut.c -+romstage-y += save_restore.c - romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c - romstage-y += testing_io.c -diff --git a/src/northbridge/intel/haswell/native_raminit/activate_mc.c b/src/northbridge/intel/haswell/native_raminit/activate_mc.c -index 78a7ad27ef..0b3eb917da 100644 ---- a/src/northbridge/intel/haswell/native_raminit/activate_mc.c -+++ b/src/northbridge/intel/haswell/native_raminit/activate_mc.c -@@ -333,6 +333,23 @@ enum raminit_status activate_mc(struct sysinfo *ctrl) - return RAMINIT_STATUS_SUCCESS; - } - -+enum raminit_status normal_state(struct sysinfo *ctrl) -+{ -+ /* Enable periodic COMP */ -+ mchbar_write32(M_COMP, (union pcu_comp_reg) { -+ .comp_interval = COMP_INT, -+ }.raw); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Set MC to normal mode and clean the ODT and CKE */ -+ mchbar_write32(REUT_ch_SEQ_CFG(channel), REUT_MODE_NOP << 12); -+ } -+ power_down_config(ctrl); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ - static void mc_lockdown(void) - { - /* Lock memory controller registers */ -diff --git a/src/northbridge/intel/haswell/native_raminit/ddr3.c b/src/northbridge/intel/haswell/native_raminit/ddr3.c -index 6ddb11488b..9b6368edb1 100644 ---- a/src/northbridge/intel/haswell/native_raminit/ddr3.c -+++ b/src/northbridge/intel/haswell/native_raminit/ddr3.c -@@ -2,6 +2,7 @@ - - #include - #include -+#include - #include - #include - -@@ -215,3 +216,43 @@ enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl) - ddr3_program_mr0(ctrl, 1); - return reut_issue_zq(ctrl, ctrl->chanmap, ZQ_INIT); - } -+ -+enum raminit_status exit_selfrefresh(struct sysinfo *ctrl) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Fields in ctrl aren't populated on a warm boot */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = mchbar_read32(DQ_CONTROL_0(channel, 0)), -+ }; -+ data_control_0.read_rf_rd = 1; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ data_control_0.read_rf_rank = rank; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ } -+ -+ /* Time needed to stabilize the DCLK (~6 us) */ -+ udelay(6); -+ -+ /* Pull the DIMMs out of self refresh by asserting CKE high */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ const union reut_misc_cke_ctrl_reg reut_misc_cke_ctrl = { -+ .cke_on = ctrl->rankmap[channel], -+ }; -+ mchbar_write32(REUT_ch_MISC_CKE_CTRL(channel), reut_misc_cke_ctrl.raw); -+ } -+ mchbar_write32(REUT_MISC_ODT_CTRL, 0); -+ -+ const enum raminit_status status = reut_issue_zq(ctrl, ctrl->chanmap, ZQ_LONG); -+ if (status) { -+ /* ZQCL errors don't seem to be a fatal problem here */ -+ printk(BIOS_ERR, "ZQ Long failed during S3 resume or warm reset flow\n"); -+ } -+ return RAMINIT_STATUS_SUCCESS; -+} -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 3a65fb01fb..056dde1adc 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -64,6 +64,22 @@ static const struct task_entry cold_boot[] = { - { train_read_mpr, true, "RDMPRT", }, - { train_jedec_write_leveling, true, "JWRL", }, - { activate_mc, true, "ACTIVATE", }, -+ { save_training_values, true, "SAVE_TRAIN", }, -+ { save_non_training, true, "SAVE_NONT", }, -+ { raminit_done, true, "RAMINITEND", }, -+}; -+ -+static const struct task_entry fast_boot[] = { -+ { collect_spd_info, true, "PROCSPD", }, -+ { restore_non_training, true, "RST_NONT", }, -+ { initialise_mpll, true, "INITMPLL", }, -+ { configure_mc, true, "CONFMC", }, -+ { configure_memory_map, true, "MEMMAP", }, -+ { do_jedec_init, true, "JEDECINIT", }, -+ { pre_training, true, "PRETRAIN", }, -+ { restore_training_values, true, "RST_TRAIN", }, -+ { exit_selfrefresh, true, "EXIT_SR", }, -+ { normal_state, true, "NORMALMODE", }, - { raminit_done, true, "RAMINITEND", }, - }; - -@@ -102,11 +118,11 @@ static void initialize_ctrl(struct sysinfo *ctrl) - ctrl->bootmode = bootmode; - } - --static enum raminit_status try_raminit(struct sysinfo *ctrl) -+static enum raminit_status try_raminit( -+ struct sysinfo *ctrl, -+ const struct task_entry *const schedule, -+ const size_t length) - { -- const struct task_entry *const schedule = cold_boot; -- const size_t length = ARRAY_SIZE(cold_boot); -- - enum raminit_status status = RAMINIT_STATUS_UNSPECIFIED_ERROR; - - for (size_t i = 0; i < length; i++) { -@@ -140,8 +156,16 @@ void raminit_main(const enum raminit_boot_mode bootmode) - mighty_ctrl.bootmode = bootmode; - initialize_ctrl(&mighty_ctrl); - -+ enum raminit_status status = RAMINIT_STATUS_UNSPECIFIED_ERROR; -+ -+ if (bootmode != BOOTMODE_COLD) { -+ status = try_raminit(&mighty_ctrl, fast_boot, ARRAY_SIZE(fast_boot)); -+ if (status == RAMINIT_STATUS_SUCCESS) -+ return; -+ } -+ - /** TODO: Try more than once **/ -- enum raminit_status status = try_raminit(&mighty_ctrl); -+ status = try_raminit(&mighty_ctrl, cold_boot, ARRAY_SIZE(cold_boot)); - - if (status != RAMINIT_STATUS_SUCCESS) - die("Memory initialization was met with utmost failure and misery\n"); -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c -index 5f7ceec222..3ad8ce29e7 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c -@@ -54,23 +54,17 @@ static bool early_init_native(enum raminit_boot_mode bootmode) - return cpu_replaced; - } - --#define MRC_CACHE_VERSION 1 -- --struct mrc_data { -- const void *buffer; -- size_t buffer_len; --}; -- --static void save_mrc_data(struct mrc_data *md) -+static void save_mrc_data(void) - { -- mrc_cache_stash_data(MRC_TRAINING_DATA, MRC_CACHE_VERSION, md->buffer, md->buffer_len); -+ mrc_cache_stash_data(MRC_TRAINING_DATA, reg_frame_rev(), -+ reg_frame_ptr(), reg_frame_size()); - } - - static struct mrc_data prepare_mrc_cache(void) - { - struct mrc_data md = {0}; - md.buffer = mrc_cache_current_mmap_leak(MRC_TRAINING_DATA, -- MRC_CACHE_VERSION, -+ reg_frame_rev(), - &md.buffer_len); - return md; - } -@@ -94,14 +88,15 @@ static void raminit_reset(void) - } - - static enum raminit_boot_mode do_actual_raminit( -- struct mrc_data *md, - const bool s3resume, - const bool cpu_replaced, - const enum raminit_boot_mode orig_bootmode) - { -+ struct mrc_data md = prepare_mrc_cache(); -+ - enum raminit_boot_mode bootmode = orig_bootmode; - -- bool save_data_valid = md->buffer && md->buffer_len == USHRT_MAX; /** TODO: sizeof() **/ -+ bool save_data_valid = md.buffer && md.buffer_len == reg_frame_size(); - - if (s3resume) { - if (bootmode == BOOTMODE_COLD) { -@@ -154,7 +149,7 @@ static enum raminit_boot_mode do_actual_raminit( - assert(save_data_valid != (bootmode == BOOTMODE_COLD)); - if (save_data_valid) { - printk(BIOS_INFO, "Using cached memory parameters\n"); -- die("RAMINIT: Fast boot is not yet implemented\n"); -+ memcpy(reg_frame_ptr(), md.buffer, reg_frame_size()); - } - printk(RAM_DEBUG, "Initial bootmode: %s\n", bm_names[orig_bootmode]); - printk(RAM_DEBUG, "Current bootmode: %s\n", bm_names[bootmode]); -@@ -181,10 +176,8 @@ void perform_raminit(const int s3resume) - wait_txt_clear(); - wrmsr(0x2e6, (msr_t) {.lo = 0, .hi = 0}); - -- struct mrc_data md = prepare_mrc_cache(); -- - const enum raminit_boot_mode bootmode = -- do_actual_raminit(&md, s3resume, cpu_replaced, orig_bootmode); -+ do_actual_raminit(s3resume, cpu_replaced, orig_bootmode); - - /** TODO: report_memory_config **/ - -@@ -212,9 +205,8 @@ void perform_raminit(const int s3resume) - } - - /* Save training data on non-S3 resumes */ -- /** TODO: Enable this once training data is populated **/ -- if (0 && !s3resume) -- save_mrc_data(&md); -+ if (!s3resume) -+ save_mrc_data(); - - /** TODO: setup_sdram_meminfo **/ - } -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index a0a913f926..2ac16eaad3 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -170,6 +170,8 @@ enum regfile_mode { - REG_FILE_USE_CURRENT, /* Used when changing parameters after the test */ - }; - -+struct register_save_frame; -+ - struct wdb_pat { - uint32_t start_ptr; /* Starting pointer in WDB */ - uint32_t stop_ptr; /* Stopping pointer in WDB */ -@@ -220,6 +222,7 @@ enum raminit_status { - RAMINIT_STATUS_RCVEN_FAILURE, - RAMINIT_STATUS_RMPR_FAILURE, - RAMINIT_STATUS_JWRL_FAILURE, -+ RAMINIT_STATUS_INVALID_CACHE, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -229,6 +232,11 @@ enum generic_stepping { - STEPPING_C0 = 3, - }; - -+struct mrc_data { -+ const void *buffer; -+ size_t buffer_len; -+}; -+ - struct raminit_dimm_info { - spd_ddr3_raw_data raw_spd; - struct dimm_attr_ddr3_st data; -@@ -448,12 +456,22 @@ enum raminit_status do_jedec_init(struct sysinfo *ctrl); - enum raminit_status train_receive_enable(struct sysinfo *ctrl); - enum raminit_status train_read_mpr(struct sysinfo *ctrl); - enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); -+enum raminit_status save_training_values(struct sysinfo *ctrl); -+enum raminit_status restore_training_values(struct sysinfo *ctrl); -+enum raminit_status save_non_training(struct sysinfo *ctrl); -+enum raminit_status restore_non_training(struct sysinfo *ctrl); -+enum raminit_status exit_selfrefresh(struct sysinfo *ctrl); -+enum raminit_status normal_state(struct sysinfo *ctrl); - enum raminit_status activate_mc(struct sysinfo *ctrl); - enum raminit_status raminit_done(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); - -+struct register_save_frame *reg_frame_ptr(void); -+size_t reg_frame_size(void); -+uint32_t reg_frame_rev(void); -+ - uint32_t get_tCKE(uint32_t mem_clock_mhz, bool lpddr); - uint32_t get_tXPDLL(uint32_t mem_clock_mhz); - uint32_t get_tAONPD(uint32_t mem_clock_mhz); -diff --git a/src/northbridge/intel/haswell/native_raminit/save_restore.c b/src/northbridge/intel/haswell/native_raminit/save_restore.c -new file mode 100644 -index 0000000000..f1f50e3ff8 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/save_restore.c -@@ -0,0 +1,387 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+uint32_t reg_frame_rev(void) -+{ -+ /* -+ * Equivalent to MRC_CACHE_REVISION, but hidden via abstraction. -+ * The structures that get saved to flash are contained within -+ * this translation unit, so changes outside this file shouldn't -+ * require invalidating the cache. -+ */ -+ return 1; -+} -+ -+struct register_save { -+ uint16_t lower; -+ uint16_t upper; -+}; -+ -+/** TODO: Haswell DDRIO aliases writes: 0x80 .. 0xff => 0x00 .. 0x7f **/ -+static const struct register_save ddrio_per_byte_list[] = { -+ {0x0000, 0x003c}, /* 16 registers */ -+// {0x0048, 0x0084}, /* 16 registers */ /** TODO: BDW support **/ -+ {0x0048, 0x004c}, /* 2 registers */ -+ {0x005c, 0x0078}, /* 8 registers */ -+}; -+#define DDRIO_PER_BYTE_REGISTER_COUNT (16 + 2 + 8) -+ -+static const struct register_save ddrio_per_ch_list[] = { -+ /* CKE */ -+ {0x1204, 0x1208}, /* 2 registers */ -+ {0x1214, 0x121c}, /* 3 registers */ -+ /* CMD North */ -+ {0x1404, 0x140c}, /* 3 registers */ -+ /* CLK */ -+ {0x1808, 0x1810}, /* 3 registers */ -+ /* CMD South */ -+ {0x1a04, 0x1a0c}, /* 3 registers */ -+ /* CTL */ -+ {0x1c14, 0x1c1c}, /* 3 registers */ -+}; -+#define DDRIO_PER_CH_REGISTER_COUNT (2 + 3 * 5) -+ -+static const struct register_save ddrio_common_list[] = { -+ {0x2000, 0x2008}, /* 3 registers */ -+ {0x3a14, 0x3a1c}, /* 3 registers */ -+ {0x3a24, 0x3a24}, /* 1 registers */ -+}; -+ -+#define DDRIO_COMMON_REGISTER_COUNT (3 + 3 + 1) -+ -+static const struct register_save mcmain_per_ch_list[] = { -+ {0x4000, 0x4014}, /* 6 registers */ -+ {0x4024, 0x4028}, /* 2 registers */ -+ {0x40d0, 0x40d0}, /* 1 registers */ -+ {0x4220, 0x4224}, /* 2 registers */ -+ {0x4294, 0x4294}, /* 1 registers */ -+ {0x429c, 0x42a0}, /* 2 registers */ -+ {0x42ec, 0x42fc}, /* 5 registers */ -+ {0x4328, 0x4328}, /* 1 registers */ -+ {0x438c, 0x4390}, /* 2 registers */ -+}; -+#define MCMAIN_PER_CH_REGISTER_COUNT (6 + 2 + 1 + 2 + 1 + 2 + 5 + 1 + 2) -+ -+static const struct register_save misc_common_list[] = { -+ {0x5884, 0x5888}, /* 2 registers */ -+ {0x5890, 0x589c}, /* 4 registers */ -+ {0x58a4, 0x58a4}, /* 1 registers */ -+ {0x58d0, 0x58e4}, /* 6 registers */ -+ {0x5880, 0x5880}, /* 1 registers */ -+ {0x5000, 0x50dc}, /* 56 registers */ -+ {0x59b8, 0x59b8} /* 1 registers */ -+}; -+#define MISC_COMMON_REGISTER_COUNT (2 + 4 + 1 + 6 + 1 + 56 + 1) -+ -+struct save_params { -+ bool is_initialised; -+ -+ /* Memory base frequency, either 100 or 133 MHz */ -+ uint8_t base_freq; -+ -+ /* Multiplier */ -+ uint32_t multiplier; -+ -+ /* Memory clock in MHz */ -+ uint32_t mem_clock_mhz; -+ -+ /* Memory clock in femtoseconds */ -+ uint32_t mem_clock_fs; -+ -+ /* Quadrature clock in picoseconds */ -+ uint16_t qclkps; -+ -+ /* Bitfield of supported CAS latencies */ -+ uint16_t cas_supported; -+ -+ /* CPUID value */ -+ uint32_t cpu; -+ -+ /* Cached CPU stepping value */ -+ uint8_t stepping; -+ -+ uint16_t vdd_mv; -+ -+ union dimm_flags_ddr3_st flags; -+ -+ /* Except for tCK, everything is stored in DCLKs */ -+ uint32_t tCK; -+ uint32_t tAA; -+ uint32_t tWR; -+ uint32_t tRCD; -+ uint32_t tRRD; -+ uint32_t tRP; -+ uint32_t tRAS; -+ uint32_t tRC; -+ uint32_t tRFC; -+ uint32_t tWTR; -+ uint32_t tRTP; -+ uint32_t tFAW; -+ uint32_t tCWL; -+ uint32_t tCMD; -+ -+ uint32_t tREFI; -+ uint32_t tXP; -+ -+ uint8_t lpddr_cke_rank_map[NUM_CHANNELS]; -+ -+ struct raminit_dimm_info dimms[NUM_CHANNELS][NUM_SLOTS]; -+ -+ uint8_t chanmap; -+ -+ uint32_t channel_size_mb[NUM_CHANNELS]; -+ -+ /* DIMMs per channel */ -+ uint8_t dpc[NUM_CHANNELS]; -+ -+ uint8_t rankmap[NUM_CHANNELS]; -+ -+ /* Whether a rank is mirrored or not (only rank 1 of each DIMM can be) */ -+ uint8_t rank_mirrored[NUM_CHANNELS]; -+ -+ /* -+ * FIXME: LPDDR support is incomplete. The largest chunks are missing, -+ * but some LPDDR-specific variations in algorithms have been handled. -+ * LPDDR-specific functions have stubs which will halt upon execution. -+ */ -+ bool lpddr; -+ -+ uint8_t lanes; -+ -+ /* FIXME: ECC support missing */ -+ bool is_ecc; -+}; -+ -+struct register_save_frame { -+ uint32_t ddrio_per_byte[NUM_CHANNELS][NUM_LANES][DDRIO_PER_BYTE_REGISTER_COUNT]; -+ uint32_t ddrio_per_ch[NUM_CHANNELS][DDRIO_PER_CH_REGISTER_COUNT]; -+ uint32_t ddrio_common[DDRIO_COMMON_REGISTER_COUNT]; -+ uint32_t mcmain_per_ch[NUM_CHANNELS][MCMAIN_PER_CH_REGISTER_COUNT]; -+ uint32_t misc_common[MISC_COMMON_REGISTER_COUNT]; -+ struct save_params params; -+}; -+ -+struct register_save_frame *reg_frame_ptr(void) -+{ -+ /* The chonky register save frame struct, used for fast boot and S3 resume */ -+ static struct register_save_frame register_frame = { 0 }; -+ return ®ister_frame; -+} -+ -+size_t reg_frame_size(void) -+{ -+ return sizeof(struct register_save_frame); -+} -+ -+typedef void (*reg_func_t)(const uint16_t offset, uint32_t *const value); -+ -+static void save_value(const uint16_t offset, uint32_t *const value) -+{ -+ *value = mchbar_read32(offset); -+} -+ -+static void restore_value(const uint16_t offset, uint32_t *const value) -+{ -+ mchbar_write32(offset, *value); -+} -+ -+static void save_restore( -+ uint32_t *reg_frame, -+ const uint16_t g_offset, -+ const struct register_save *reg_save_list, -+ const size_t reg_save_length, -+ reg_func_t handle_reg) -+{ -+ for (size_t i = 0; i < reg_save_length; i++) { -+ const struct register_save *entry = ®_save_list[i]; -+ for (uint16_t offset = entry->lower; offset <= entry->upper; offset += 4) { -+ handle_reg(offset + g_offset, reg_frame++); -+ } -+ } -+} -+ -+static void save_restore_all(struct register_save_frame *reg_frame, reg_func_t handle_reg) -+{ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ for (uint8_t byte = 0; byte < NUM_LANES; byte++) { -+ const uint16_t g_offset = _DDRIO_C_R_B(0, channel, 0, byte); -+ save_restore( -+ reg_frame->ddrio_per_byte[channel][byte], -+ g_offset, -+ ddrio_per_byte_list, -+ ARRAY_SIZE(ddrio_per_byte_list), -+ handle_reg); -+ } -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ const uint16_t g_offset = _DDRIO_C_R_B(0, channel, 0, 0); -+ save_restore( -+ reg_frame->ddrio_per_ch[channel], -+ g_offset, -+ ddrio_per_ch_list, -+ ARRAY_SIZE(ddrio_per_ch_list), -+ handle_reg); -+ } -+ save_restore( -+ reg_frame->ddrio_common, -+ 0, -+ ddrio_common_list, -+ ARRAY_SIZE(ddrio_common_list), -+ handle_reg); -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ const uint16_t g_offset = _MCMAIN_C(0, channel); -+ save_restore( -+ reg_frame->mcmain_per_ch[channel], -+ g_offset, -+ mcmain_per_ch_list, -+ ARRAY_SIZE(mcmain_per_ch_list), -+ handle_reg); -+ } -+ save_restore( -+ reg_frame->misc_common, -+ 0, -+ misc_common_list, -+ ARRAY_SIZE(misc_common_list), -+ handle_reg); -+} -+ -+enum raminit_status save_training_values(struct sysinfo *ctrl) -+{ -+ save_restore_all(reg_frame_ptr(), save_value); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+enum raminit_status restore_training_values(struct sysinfo *ctrl) -+{ -+ save_restore_all(reg_frame_ptr(), restore_value); -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+enum raminit_status save_non_training(struct sysinfo *ctrl) -+{ -+ struct register_save_frame *reg_frame = reg_frame_ptr(); -+ struct save_params *params = ®_frame->params; -+ -+ params->is_initialised = true; -+ -+ params->base_freq = ctrl->base_freq; -+ params->multiplier = ctrl->multiplier; -+ params->mem_clock_mhz = ctrl->mem_clock_mhz; -+ params->mem_clock_fs = ctrl->mem_clock_fs; -+ params->qclkps = ctrl->qclkps; -+ params->cas_supported = ctrl->cas_supported; -+ params->cpu = ctrl->cpu; -+ params->stepping = ctrl->stepping; -+ params->vdd_mv = ctrl->vdd_mv; -+ params->flags = ctrl->flags; -+ -+ params->tCK = ctrl->tCK; -+ params->tAA = ctrl->tAA; -+ params->tWR = ctrl->tWR; -+ params->tRCD = ctrl->tRCD; -+ params->tRRD = ctrl->tRRD; -+ params->tRP = ctrl->tRP; -+ params->tRAS = ctrl->tRAS; -+ params->tRC = ctrl->tRC; -+ params->tRFC = ctrl->tRFC; -+ params->tWTR = ctrl->tWTR; -+ params->tRTP = ctrl->tRTP; -+ params->tFAW = ctrl->tFAW; -+ params->tCWL = ctrl->tCWL; -+ params->tCMD = ctrl->tCMD; -+ params->tREFI = ctrl->tREFI; -+ params->tXP = ctrl->tXP; -+ -+ params->chanmap = ctrl->chanmap; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ params->lpddr_cke_rank_map[channel] = ctrl->lpddr_cke_rank_map[channel]; -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) -+ params->dimms[channel][slot] = ctrl->dimms[channel][slot]; -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ params->dpc[channel] = ctrl->dpc[channel]; -+ params->rankmap[channel] = ctrl->rankmap[channel]; -+ params->rank_mirrored[channel] = ctrl->rank_mirrored[channel]; -+ params->channel_size_mb[channel] = ctrl->channel_size_mb[channel]; -+ } -+ params->lpddr = ctrl->lpddr; -+ params->lanes = ctrl->lanes; -+ params->is_ecc = ctrl->is_ecc; -+ return RAMINIT_STATUS_SUCCESS; -+} -+ -+#define RAMINIT_COMPARE(_s1, _s2) \ -+ ((sizeof(_s1) == sizeof(_s2)) && !memcmp(_s1, _s2, sizeof(_s1))) -+ -+enum raminit_status restore_non_training(struct sysinfo *ctrl) -+{ -+ struct register_save_frame *reg_frame = reg_frame_ptr(); -+ struct save_params *params = ®_frame->params; -+ -+ if (!params->is_initialised) { -+ printk(BIOS_WARNING, "Cannot fast boot: saved data is invalid\n"); -+ return RAMINIT_STATUS_INVALID_CACHE; -+ } -+ -+ if (!RAMINIT_COMPARE(ctrl->dimms, params->dimms)) { -+ printk(BIOS_WARNING, "Cannot fast boot: DIMMs have changed\n"); -+ return RAMINIT_STATUS_INVALID_CACHE; -+ } -+ -+ if (ctrl->cpu != params->cpu) { -+ printk(BIOS_WARNING, "Cannot fast boot: CPU has changed\n"); -+ return RAMINIT_STATUS_INVALID_CACHE; -+ } -+ -+ ctrl->base_freq = params->base_freq; -+ ctrl->multiplier = params->multiplier; -+ ctrl->mem_clock_mhz = params->mem_clock_mhz; -+ ctrl->mem_clock_fs = params->mem_clock_fs; -+ ctrl->qclkps = params->qclkps; -+ ctrl->cas_supported = params->cas_supported; -+ ctrl->cpu = params->cpu; -+ ctrl->stepping = params->stepping; -+ ctrl->vdd_mv = params->vdd_mv; -+ ctrl->flags = params->flags; -+ -+ ctrl->tCK = params->tCK; -+ ctrl->tAA = params->tAA; -+ ctrl->tWR = params->tWR; -+ ctrl->tRCD = params->tRCD; -+ ctrl->tRRD = params->tRRD; -+ ctrl->tRP = params->tRP; -+ ctrl->tRAS = params->tRAS; -+ ctrl->tRC = params->tRC; -+ ctrl->tRFC = params->tRFC; -+ ctrl->tWTR = params->tWTR; -+ ctrl->tRTP = params->tRTP; -+ ctrl->tFAW = params->tFAW; -+ ctrl->tCWL = params->tCWL; -+ ctrl->tCMD = params->tCMD; -+ ctrl->tREFI = params->tREFI; -+ ctrl->tXP = params->tXP; -+ -+ ctrl->chanmap = params->chanmap; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ ctrl->lpddr_cke_rank_map[channel] = params->lpddr_cke_rank_map[channel]; -+ for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) -+ ctrl->dimms[channel][slot] = params->dimms[channel][slot]; -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ ctrl->dpc[channel] = params->dpc[channel]; -+ ctrl->rankmap[channel] = params->rankmap[channel]; -+ ctrl->rank_mirrored[channel] = params->rank_mirrored[channel]; -+ ctrl->channel_size_mb[channel] = params->channel_size_mb[channel]; -+ } -+ ctrl->lpddr = params->lpddr; -+ ctrl->lanes = params->lanes; -+ ctrl->is_ecc = params->is_ecc; -+ return RAMINIT_STATUS_SUCCESS; -+} --- -2.39.5 - diff --git a/config/coreboot/default/patches/0059-haswell-NRI-Do-sense-amplifier-offset-training.patch b/config/coreboot/default/patches/0059-haswell-NRI-Do-sense-amplifier-offset-training.patch deleted file mode 100644 index 0310e671..00000000 --- a/config/coreboot/default/patches/0059-haswell-NRI-Do-sense-amplifier-offset-training.patch +++ /dev/null @@ -1,476 +0,0 @@ -From c22e06a8ef87f74cc9955ffc259e7052742269c4 Mon Sep 17 00:00:00 2001 -From: Angel Pons -Date: Wed, 17 Apr 2024 13:20:32 +0200 -Subject: [PATCH 59/65] haswell NRI: Do sense amplifier offset training - -Quoting Wikipedia: - - A sense amplifier is a circuit that is used to amplify and detect - small signals in electronic systems. It is commonly used in memory - circuits, such as dynamic random access memory (DRAM), to read and - amplify the weak signals stored in memory cells. - -In this case, we're calibrating the sense amplifiers in the memory -controller. This training procedure uses a magic "sense amp offset -cancel" mode of the DDRIO to observe the sampled logic levels, and -sweeps Vref to find the low-high transition for each bit lane. The -procedure consists of two stages: the first stage centers per-byte -Vref (to ensure per-bit Vref offsets are as small as possible) and -the second stage centers per-bit Vref. - -Because this procedure uses the "sense amp offset cancel" mode, it -does not rely on DRAM being trained. It is assumed that the memory -controller simply makes sense amp output levels observable via the -`DDR_DATA_TRAIN_FEEDBACK` register and that the memory bus is idle -during this training step (so the lane voltage is Vdd / 2). - -Note: This procedure will need to be adapted for Broadwell because -it has per-rank per-bit RxVref registers, whereas Haswell only has -a single per-bit RxVref register for all ranks. - -Change-Id: Ia07db68763f90e9701c8a376e01279ada8dbbe07 -Signed-off-by: Angel Pons ---- - .../intel/haswell/native_raminit/Makefile.mk | 1 + - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 12 + - .../native_raminit/train_sense_amp_offset.c | 341 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 2 + - 5 files changed, 357 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -index 8fdd17c542..4bd668a2d6 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk -@@ -21,3 +21,4 @@ romstage-y += timings_refresh.c - romstage-y += train_jedec_write_leveling.c - romstage-y += train_read_mpr.c - romstage-y += train_receive_enable.c -+romstage-y += train_sense_amp_offset.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 056dde1adc..ce637e2d03 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = { - { configure_memory_map, true, "MEMMAP", }, - { do_jedec_init, true, "JEDECINIT", }, - { pre_training, true, "PRETRAIN", }, -+ { train_sense_amp_offset, true, "SOT", }, - { train_receive_enable, true, "RCVET", }, - { train_read_mpr, true, "RDMPRT", }, - { train_jedec_write_leveling, true, "JWRL", }, -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index 2ac16eaad3..07eea98831 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -23,6 +23,8 @@ - #define NUM_LANES 9 - #define NUM_LANES_NO_ECC 8 - -+#define NUM_BITS 8 -+ - #define COMP_INT 10 - - /* Always use 12 legs for emphasis (not trained) */ -@@ -219,6 +221,7 @@ enum raminit_status { - RAMINIT_STATUS_MPLL_INIT_FAILURE, - RAMINIT_STATUS_POLL_TIMEOUT, - RAMINIT_STATUS_REUT_ERROR, -+ RAMINIT_STATUS_SAMP_OFFSET_FAILURE, - RAMINIT_STATUS_RCVEN_FAILURE, - RAMINIT_STATUS_RMPR_FAILURE, - RAMINIT_STATUS_JWRL_FAILURE, -@@ -244,6 +247,12 @@ struct raminit_dimm_info { - bool valid; - }; - -+struct vref_margin { -+ uint8_t low; -+ uint8_t center; -+ uint8_t high; -+}; -+ - struct sysinfo { - enum raminit_boot_mode bootmode; - enum generic_stepping stepping; -@@ -331,6 +340,8 @@ struct sysinfo { - uint8_t rxdqsn[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; - int8_t rxvref[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES]; - -+ struct vref_margin rxdqvrefpb[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES][NUM_BITS]; -+ - uint8_t clk_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; - uint8_t ctl_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; - uint8_t cke_pi_code[NUM_CHANNELS][NUM_SLOTRANKS]; -@@ -453,6 +464,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl); - enum raminit_status configure_mc(struct sysinfo *ctrl); - enum raminit_status configure_memory_map(struct sysinfo *ctrl); - enum raminit_status do_jedec_init(struct sysinfo *ctrl); -+enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl); - enum raminit_status train_receive_enable(struct sysinfo *ctrl); - enum raminit_status train_read_mpr(struct sysinfo *ctrl); - enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c -new file mode 100644 -index 0000000000..d4f199fefb ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c -@@ -0,0 +1,341 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "raminit_native.h" -+ -+#define VREF_OFFSET_PLOT RAM_DEBUG -+#define SAMP_OFFSET_PLOT RAM_DEBUG -+ -+struct vref_train_data { -+ int8_t best_sum; -+ int8_t best_vref; -+ int8_t sum_bits; -+ uint8_t high_mask; -+ uint8_t low_mask; -+}; -+ -+static enum raminit_status train_vref_offset(struct sysinfo *ctrl) -+{ -+ const int8_t vref_start = -15; -+ const int8_t vref_stop = 15; -+ const struct vref_train_data initial_vref_values = { -+ .best_sum = -NUM_LANES, -+ .best_vref = 0, -+ .high_mask = 0, -+ .low_mask = 0xff, -+ }; -+ struct vref_train_data vref_data[NUM_CHANNELS][NUM_LANES]; -+ -+ printk(VREF_OFFSET_PLOT, "Plot of sum_bits across Vref settings\nChannel"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ printk(VREF_OFFSET_PLOT, "\t%u\t\t", channel); -+ } -+ -+ printk(VREF_OFFSET_PLOT, "\nByte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ printk(VREF_OFFSET_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ printk(VREF_OFFSET_PLOT, "%u ", byte); -+ vref_data[channel][byte] = initial_vref_values; -+ union ddr_data_control_2_reg data_control_2 = { -+ .raw = ctrl->dq_control_2[channel][byte], -+ }; -+ data_control_2.force_bias_on = 1; -+ data_control_2.force_rx_on = 1; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); -+ } -+ } -+ -+ /* Sweep through Vref settings and find point SampOffset of +/- 7 passes */ -+ printk(VREF_OFFSET_PLOT, "\n1/2 Vref"); -+ for (int8_t vref = vref_start; vref <= vref_stop; vref++) { -+ printk(VREF_OFFSET_PLOT, "\n% 3d", vref); -+ -+ /* -+ * To perform this test, enable offset cancel mode and enable ODT. -+ * Check results and update variables. Ideal result is all zeroes. -+ * Clear offset cancel mode at end of test to write RX_OFFSET_VDQ. -+ */ -+ change_1d_margin_multicast(ctrl, RdV, vref, 0, false, REG_FILE_USE_RANK); -+ -+ /* Program settings for Vref and SampOffset = 7 (8 + 7) */ -+ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0xffffffff); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Propagate delay values (without a read command) */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.read_rf_rd = 1; -+ data_control_0.read_rf_wr = 0; -+ data_control_0.read_rf_rank = 0; -+ data_control_0.force_odt_on = 1; -+ data_control_0.samp_train_mode = 1; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ udelay(1); -+ data_control_0.samp_train_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const uint8_t feedback = get_data_train_feedback(channel, byte); -+ struct vref_train_data *curr_data = &vref_data[channel][byte]; -+ curr_data->low_mask &= feedback; -+ curr_data->sum_bits = -popcnt(feedback); -+ } -+ } -+ -+ /* Program settings for Vref and SampOffset = -7 (8 - 7) */ -+ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0x11111111); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Propagate delay values (without a read command) */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.read_rf_rd = 1; -+ data_control_0.read_rf_wr = 0; -+ data_control_0.read_rf_rank = 0; -+ data_control_0.force_odt_on = 1; -+ data_control_0.samp_train_mode = 1; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ udelay(1); -+ data_control_0.samp_train_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ printk(VREF_OFFSET_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const uint8_t feedback = get_data_train_feedback(channel, byte); -+ struct vref_train_data *curr_data = &vref_data[channel][byte]; -+ curr_data->high_mask |= feedback; -+ curr_data->sum_bits += popcnt(feedback); -+ printk(VREF_OFFSET_PLOT, "%d ", curr_data->sum_bits); -+ if (curr_data->sum_bits > curr_data->best_sum) { -+ curr_data->best_sum = curr_data->sum_bits; -+ curr_data->best_vref = vref; -+ ctrl->rxvref[channel][0][byte] = vref; -+ } else if (curr_data->sum_bits == curr_data->best_sum) { -+ curr_data->best_vref = vref; -+ } -+ } -+ } -+ } -+ printk(BIOS_DEBUG, "\n\nHi-Lo (XOR):"); -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "\n C%u:", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct vref_train_data *const curr_data = &vref_data[channel][byte]; -+ const uint8_t bit_xor = curr_data->high_mask ^ curr_data->low_mask; -+ printk(BIOS_DEBUG, "\t0x%02x", bit_xor); -+ if (bit_xor == 0xff) -+ continue; -+ -+ /* Report an error if any bit did not change */ -+ status = RAMINIT_STATUS_SAMP_OFFSET_FAILURE; -+ } -+ } -+ if (status) -+ printk(BIOS_ERR, "\nUnexpected bit error in Vref offset training\n"); -+ -+ printk(BIOS_DEBUG, "\n\nRdVref:"); -+ change_1d_margin_multicast(ctrl, RdV, 0, 0, false, REG_FILE_USE_RANK); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "\n C%u:", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct vref_train_data *const curr_data = &vref_data[channel][byte]; -+ const int8_t vref_width = -+ curr_data->best_vref - ctrl->rxvref[channel][0][byte]; -+ -+ /* -+ * Step size for Rx Vref in DATA_OFFSET_TRAIN is about 3.9 mV -+ * whereas Rx Vref step size in RX_TRAIN_RANK is about 7.8 mV -+ */ -+ int8_t vref = ctrl->rxvref[channel][0][byte] + vref_width / 2; -+ if (vref < 0) -+ vref--; -+ else -+ vref++; -+ -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ ctrl->rxvref[channel][rank][byte] = vref / 2; -+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0); -+ } -+ printk(BIOS_DEBUG, "\t% 4d", ctrl->rxvref[channel][0][byte]); -+ } -+ } -+ printk(BIOS_DEBUG, "\n\n"); -+ return status; -+} -+ -+/** -+ * LPDDR has an additional bit for DQS per each byte. -+ * -+ * TODO: The DQS value must be written into Data Control 2. -+ */ -+#define NUM_OFFSET_TRAIN_BITS (NUM_BITS + 1) -+ -+#define PLOT_CH_SPACE " " -+ -+struct samp_train_data { -+ uint8_t first_zero; -+ uint8_t last_one; -+}; -+ -+static void train_samp_offset(struct sysinfo *ctrl) -+{ -+ const uint8_t max_train_bits = ctrl->lpddr ? NUM_OFFSET_TRAIN_BITS : NUM_BITS; -+ -+ struct samp_train_data samp_data[NUM_CHANNELS][NUM_LANES][NUM_OFFSET_TRAIN_BITS] = {0}; -+ -+ printk(BIOS_DEBUG, "Channel "); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "%u ", channel); /* Same length as PLOT_CH_SPACE */ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(BIOS_DEBUG, " %s ", ctrl->lpddr ? " " : ""); -+ } -+ printk(BIOS_DEBUG, "\nByte "); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(BIOS_DEBUG, "%u %s ", byte, ctrl->lpddr ? " " : ""); -+ -+ printk(BIOS_DEBUG, PLOT_CH_SPACE); -+ } -+ printk(SAMP_OFFSET_PLOT, "\nBits "); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(SAMP_OFFSET_PLOT, "01234567%s ", ctrl->lpddr ? "S" : ""); -+ -+ printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE); -+ } -+ printk(SAMP_OFFSET_PLOT, "\n SAmp\n"); -+ for (uint8_t samp_offset = 1; samp_offset <= 15; samp_offset++) { -+ printk(SAMP_OFFSET_PLOT, "% 5d\t", samp_offset); -+ -+ uint32_t rx_offset_vdq = 0; -+ for (uint8_t bit = 0; bit < NUM_BITS; bit++) { -+ rx_offset_vdq += samp_offset << (4 * bit); -+ } -+ mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, rx_offset_vdq); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Propagate delay values (without a read command) */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.read_rf_rd = 1; -+ data_control_0.read_rf_wr = 0; -+ data_control_0.read_rf_rank = 0; -+ data_control_0.force_odt_on = 1; -+ data_control_0.samp_train_mode = 1; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ udelay(1); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const uint32_t feedback = -+ get_data_train_feedback(channel, byte); -+ -+ for (uint8_t bit = 0; bit < max_train_bits; bit++) { -+ struct samp_train_data *const curr_data = -+ &samp_data[channel][byte][bit]; -+ const bool result = feedback & BIT(bit); -+ if (result) { -+ curr_data->last_one = samp_offset; -+ } else if (curr_data->first_zero == 0) { -+ curr_data->first_zero = samp_offset; -+ } -+ printk(SAMP_OFFSET_PLOT, result ? "." : "#"); -+ } -+ printk(SAMP_OFFSET_PLOT, " "); -+ } -+ printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE); -+ data_control_0.samp_train_mode = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ printk(SAMP_OFFSET_PLOT, "\n"); -+ } -+ printk(BIOS_DEBUG, "\nBitSAmp "); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ uint32_t rx_offset_vdq = 0; -+ for (uint8_t bit = 0; bit < max_train_bits; bit++) { -+ struct samp_train_data *const curr_data = -+ &samp_data[channel][byte][bit]; -+ -+ uint8_t vref = curr_data->first_zero + curr_data->last_one; -+ vref = clamp_u8(0, vref / 2, 15); -+ /* -+ * Check for saturation conditions to make sure -+ * we are as close as possible to Vdd/2 (750 mV). -+ */ -+ if (curr_data->first_zero == 0) -+ vref = 15; -+ if (curr_data->last_one == 0) -+ vref = 0; -+ -+ ctrl->rxdqvrefpb[channel][0][byte][bit].center = vref; -+ rx_offset_vdq += vref & 0xf << (4 * bit); -+ printk(BIOS_DEBUG, "%x", vref); -+ } -+ mchbar_write32(RX_OFFSET_VDQ(channel, byte), rx_offset_vdq); -+ printk(BIOS_DEBUG, " "); -+ download_regfile(ctrl, channel, 1, 0, REG_FILE_USE_RANK, 0, 1, 0); -+ } -+ printk(BIOS_DEBUG, PLOT_CH_SPACE); -+ } -+ printk(BIOS_DEBUG, "\n"); -+} -+ -+enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl) -+{ -+ printk(BIOS_DEBUG, "Stage 1: Vref offset training\n"); -+ const enum raminit_status status = train_vref_offset(ctrl); -+ -+ printk(BIOS_DEBUG, "Stage 2: Samp offset training\n"); -+ train_samp_offset(ctrl); -+ -+ /* Clean up after test */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ mchbar_write32(DQ_CONTROL_2(channel, byte), -+ ctrl->dq_control_2[channel][byte]); -+ } -+ io_reset(); -+ return status; -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 49a215aa71..1a168a3fc8 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -18,6 +18,8 @@ - #define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte) - #define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte) - -+#define RX_OFFSET_VDQ(ch, byte) _DDRIO_C_R_B(0x004c, ch, 0, byte) -+ - #define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte) - - #define DQ_CONTROL_1(ch, byte) _DDRIO_C_R_B(0x0060, ch, 0, byte) --- -2.39.5 - diff --git a/config/coreboot/default/patches/0060-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch b/config/coreboot/default/patches/0060-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch deleted file mode 100644 index a899693b..00000000 --- a/config/coreboot/default/patches/0060-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch +++ /dev/null @@ -1,52 +0,0 @@ -From c0e95144b426ab323e0397942579261fbb7b922b Mon Sep 17 00:00:00 2001 -From: Leah Rowe -Date: Mon, 12 Aug 2024 02:15:24 +0100 -Subject: [PATCH 60/65] nb/x4x: define INTEL_GMA_DPLL_REF_FREQ - -set it to 96MHz. fixes the following build error when -building for x4x boards e.g. gigabyte ga-g41m-es2l: - -hw-gfx-gma-plls.adb:465:46: error: "INTEL_GMA_DPLL_REF_FREQ" not declared in "Config" -make: *** [Makefile:423: build/ramstage/libgfxinit/common/g45/hw-gfx-gma-plls.o] Error 1 - -this error was introduced when merging coreboot/dell -into coreboot/default in lbmk. nicholas chin's fix in lbmk -was as follows: - -commit 8629873a6043067affc137be275b7aa69cb1f10c -Author: Nicholas Chin -Date: Mon May 20 10:46:25 2024 -0600 - - Fix E6400 display issue with 1440 x 900 panel - -this currently corresponds to the patch in lbmk, -as of 12 august 2024: - -0042-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch - -The assumption prior to Nicholas's fix was 96MHz, so set -it accordingly on x4x northbridge. - -Signed-off-by: Leah Rowe ---- - src/northbridge/intel/x4x/Kconfig | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig -index 9af063819b..93ba575b95 100644 ---- a/src/northbridge/intel/x4x/Kconfig -+++ b/src/northbridge/intel/x4x/Kconfig -@@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_X4X - - if NORTHBRIDGE_INTEL_X4X - -+config INTEL_GMA_DPLL_REF_FREQ -+ int -+ default 96000000 -+ - config CBFS_SIZE - default 0x100000 if !SOUTHBRIDGE_INTEL_I82801GX - --- -2.39.5 - diff --git a/config/coreboot/default/patches/0062-mb-dell-Convert-E6400-into-a-variant.patch b/config/coreboot/default/patches/0062-mb-dell-Convert-E6400-into-a-variant.patch deleted file mode 100644 index acd7074c..00000000 --- a/config/coreboot/default/patches/0062-mb-dell-Convert-E6400-into-a-variant.patch +++ /dev/null @@ -1,243 +0,0 @@ -From 0caa5d97b67b2acf571e4fab2b7f85ef3d3a7260 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Thu, 26 Sep 2024 19:48:26 -0600 -Subject: [PATCH 62/65] mb/dell: Convert E6400 into a variant - -All the GM45 Dell Latitudes should be nearly identical, so convert the -E6400 port into a variant so that future ports for the other systems can -share code with each other. - -Change-Id: I8094fce56eaaadb20aef173644cd3b2c0b008e95 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/e6400/Makefile.mk | 10 -------- - .../dell/{e6400 => gm45_latitude}/Kconfig | 22 +++++++++++++----- - .../{e6400 => gm45_latitude}/Kconfig.name | 0 - src/mainboard/dell/gm45_latitude/Makefile.mk | 11 +++++++++ - .../dell/{e6400 => gm45_latitude}/acpi/ec.asl | 0 - .../acpi/ich9_pci_irqs.asl | 0 - .../{e6400 => gm45_latitude}/acpi/superio.asl | 0 - .../dell/{e6400 => gm45_latitude}/blc.c | 0 - .../{e6400 => gm45_latitude}/board_info.txt | 0 - .../dell/{e6400 => gm45_latitude}/bootblock.c | 0 - .../{e6400 => gm45_latitude}/cmos.default | 0 - .../dell/{e6400 => gm45_latitude}/cmos.layout | 0 - .../dell/{e6400 => gm45_latitude}/cstates.c | 0 - .../{e6400 => gm45_latitude}/devicetree.cb | 1 - - .../dell/{e6400 => gm45_latitude}/dsdt.asl | 0 - .../dell/{e6400 => gm45_latitude}/mainboard.c | 0 - .../dell/{e6400 => gm45_latitude}/romstage.c | 0 - .../variants}/e6400/data.vbt | Bin - .../variants}/e6400/gma-mainboard.ads | 0 - .../{ => gm45_latitude/variants}/e6400/gpio.c | 0 - .../variants}/e6400/hda_verb.c | 0 - .../variants/e6400/overridetree.cb | 7 ++++++ - 22 files changed, 34 insertions(+), 17 deletions(-) - delete mode 100644 src/mainboard/dell/e6400/Makefile.mk - rename src/mainboard/dell/{e6400 => gm45_latitude}/Kconfig (64%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/Kconfig.name (100%) - create mode 100644 src/mainboard/dell/gm45_latitude/Makefile.mk - rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/ec.asl (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/ich9_pci_irqs.asl (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/superio.asl (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/blc.c (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/board_info.txt (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/bootblock.c (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/cmos.default (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/cmos.layout (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/cstates.c (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/devicetree.cb (98%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/dsdt.asl (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/mainboard.c (100%) - rename src/mainboard/dell/{e6400 => gm45_latitude}/romstage.c (100%) - rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/data.vbt (100%) - rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/gma-mainboard.ads (100%) - rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/gpio.c (100%) - rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/hda_verb.c (100%) - create mode 100644 src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb - -diff --git a/src/mainboard/dell/e6400/Makefile.mk b/src/mainboard/dell/e6400/Makefile.mk -deleted file mode 100644 -index ca3a82db48..0000000000 ---- a/src/mainboard/dell/e6400/Makefile.mk -+++ /dev/null -@@ -1,10 +0,0 @@ --## SPDX-License-Identifier: GPL-2.0-only -- --bootblock-y += bootblock.c -- --romstage-y += gpio.c -- --ramstage-y += cstates.c --ramstage-y += blc.c -- --ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads -diff --git a/src/mainboard/dell/e6400/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig -similarity index 64% -rename from src/mainboard/dell/e6400/Kconfig -rename to src/mainboard/dell/gm45_latitude/Kconfig -index 6fe1b1c456..ba76fb6e8c 100644 ---- a/src/mainboard/dell/e6400/Kconfig -+++ b/src/mainboard/dell/gm45_latitude/Kconfig -@@ -1,9 +1,7 @@ - ## SPDX-License-Identifier: GPL-2.0-only - --if BOARD_DELL_E6400 -- --config BOARD_SPECIFIC_OPTIONS -- def_bool y -+config BOARD_DELL_GM45_LATITUDE_COMMON -+ def_bool n - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_P - select NORTHBRIDGE_INTEL_GM45 -@@ -19,19 +17,31 @@ config BOARD_SPECIFIC_OPTIONS - select INTEL_GMA_HAVE_VBT - select EC_DELL_MEC5035 - -+ -+config BOARD_DELL_E6400 -+ select BOARD_DELL_GM45_LATITUDE_COMMON -+ -+if BOARD_DELL_GM45_LATITUDE_COMMON -+ - config INTEL_GMA_DPLL_REF_FREQ - default 100000000 - - config MAINBOARD_DIR -- default "dell/e6400" -+ default "dell/gm45_latitude" - - config MAINBOARD_PART_NUMBER - default "Latitude E6400" if BOARD_DELL_E6400 - -+config OVERRIDE_DEVICETREE -+ default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" -+ -+config VARIANT_DIR -+ default "e6400" if BOARD_DELL_E6400 -+ - config USBDEBUG_HCD_INDEX - default 1 - - config CBFS_SIZE - default 0x1A0000 - --endif # BOARD_DELL_E6400 -+endif # BOARD_DELL_GM45_LATITUDE_COMMON -diff --git a/src/mainboard/dell/e6400/Kconfig.name b/src/mainboard/dell/gm45_latitude/Kconfig.name -similarity index 100% -rename from src/mainboard/dell/e6400/Kconfig.name -rename to src/mainboard/dell/gm45_latitude/Kconfig.name -diff --git a/src/mainboard/dell/gm45_latitude/Makefile.mk b/src/mainboard/dell/gm45_latitude/Makefile.mk -new file mode 100644 -index 0000000000..5295d5be22 ---- /dev/null -+++ b/src/mainboard/dell/gm45_latitude/Makefile.mk -@@ -0,0 +1,11 @@ -+## SPDX-License-Identifier: GPL-2.0-only -+ -+bootblock-y += bootblock.c -+ -+romstage-y += variants/$(VARIANT_DIR)/gpio.c -+ -+ramstage-y += cstates.c -+ramstage-y += blc.c -+ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c -+ -+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads -diff --git a/src/mainboard/dell/e6400/acpi/ec.asl b/src/mainboard/dell/gm45_latitude/acpi/ec.asl -similarity index 100% -rename from src/mainboard/dell/e6400/acpi/ec.asl -rename to src/mainboard/dell/gm45_latitude/acpi/ec.asl -diff --git a/src/mainboard/dell/e6400/acpi/ich9_pci_irqs.asl b/src/mainboard/dell/gm45_latitude/acpi/ich9_pci_irqs.asl -similarity index 100% -rename from src/mainboard/dell/e6400/acpi/ich9_pci_irqs.asl -rename to src/mainboard/dell/gm45_latitude/acpi/ich9_pci_irqs.asl -diff --git a/src/mainboard/dell/e6400/acpi/superio.asl b/src/mainboard/dell/gm45_latitude/acpi/superio.asl -similarity index 100% -rename from src/mainboard/dell/e6400/acpi/superio.asl -rename to src/mainboard/dell/gm45_latitude/acpi/superio.asl -diff --git a/src/mainboard/dell/e6400/blc.c b/src/mainboard/dell/gm45_latitude/blc.c -similarity index 100% -rename from src/mainboard/dell/e6400/blc.c -rename to src/mainboard/dell/gm45_latitude/blc.c -diff --git a/src/mainboard/dell/e6400/board_info.txt b/src/mainboard/dell/gm45_latitude/board_info.txt -similarity index 100% -rename from src/mainboard/dell/e6400/board_info.txt -rename to src/mainboard/dell/gm45_latitude/board_info.txt -diff --git a/src/mainboard/dell/e6400/bootblock.c b/src/mainboard/dell/gm45_latitude/bootblock.c -similarity index 100% -rename from src/mainboard/dell/e6400/bootblock.c -rename to src/mainboard/dell/gm45_latitude/bootblock.c -diff --git a/src/mainboard/dell/e6400/cmos.default b/src/mainboard/dell/gm45_latitude/cmos.default -similarity index 100% -rename from src/mainboard/dell/e6400/cmos.default -rename to src/mainboard/dell/gm45_latitude/cmos.default -diff --git a/src/mainboard/dell/e6400/cmos.layout b/src/mainboard/dell/gm45_latitude/cmos.layout -similarity index 100% -rename from src/mainboard/dell/e6400/cmos.layout -rename to src/mainboard/dell/gm45_latitude/cmos.layout -diff --git a/src/mainboard/dell/e6400/cstates.c b/src/mainboard/dell/gm45_latitude/cstates.c -similarity index 100% -rename from src/mainboard/dell/e6400/cstates.c -rename to src/mainboard/dell/gm45_latitude/cstates.c -diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/gm45_latitude/devicetree.cb -similarity index 98% -rename from src/mainboard/dell/e6400/devicetree.cb -rename to src/mainboard/dell/gm45_latitude/devicetree.cb -index e9f3915d17..76dae87153 100644 ---- a/src/mainboard/dell/e6400/devicetree.cb -+++ b/src/mainboard/dell/gm45_latitude/devicetree.cb -@@ -15,7 +15,6 @@ chip northbridge/intel/gm45 - register "pci_mmio_size" = "2048" - - device domain 0 on -- subsystemid 0x1028 0x0233 inherit - ops gm45_pci_domain_ops - - device pci 00.0 on end # host bridge -diff --git a/src/mainboard/dell/e6400/dsdt.asl b/src/mainboard/dell/gm45_latitude/dsdt.asl -similarity index 100% -rename from src/mainboard/dell/e6400/dsdt.asl -rename to src/mainboard/dell/gm45_latitude/dsdt.asl -diff --git a/src/mainboard/dell/e6400/mainboard.c b/src/mainboard/dell/gm45_latitude/mainboard.c -similarity index 100% -rename from src/mainboard/dell/e6400/mainboard.c -rename to src/mainboard/dell/gm45_latitude/mainboard.c -diff --git a/src/mainboard/dell/e6400/romstage.c b/src/mainboard/dell/gm45_latitude/romstage.c -similarity index 100% -rename from src/mainboard/dell/e6400/romstage.c -rename to src/mainboard/dell/gm45_latitude/romstage.c -diff --git a/src/mainboard/dell/e6400/data.vbt b/src/mainboard/dell/gm45_latitude/variants/e6400/data.vbt -similarity index 100% -rename from src/mainboard/dell/e6400/data.vbt -rename to src/mainboard/dell/gm45_latitude/variants/e6400/data.vbt -diff --git a/src/mainboard/dell/e6400/gma-mainboard.ads b/src/mainboard/dell/gm45_latitude/variants/e6400/gma-mainboard.ads -similarity index 100% -rename from src/mainboard/dell/e6400/gma-mainboard.ads -rename to src/mainboard/dell/gm45_latitude/variants/e6400/gma-mainboard.ads -diff --git a/src/mainboard/dell/e6400/gpio.c b/src/mainboard/dell/gm45_latitude/variants/e6400/gpio.c -similarity index 100% -rename from src/mainboard/dell/e6400/gpio.c -rename to src/mainboard/dell/gm45_latitude/variants/e6400/gpio.c -diff --git a/src/mainboard/dell/e6400/hda_verb.c b/src/mainboard/dell/gm45_latitude/variants/e6400/hda_verb.c -similarity index 100% -rename from src/mainboard/dell/e6400/hda_verb.c -rename to src/mainboard/dell/gm45_latitude/variants/e6400/hda_verb.c -diff --git a/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb b/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb -new file mode 100644 -index 0000000000..acc34a2252 ---- /dev/null -+++ b/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb -@@ -0,0 +1,7 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/gm45 -+ device domain 0 on -+ subsystemid 0x1028 0x0233 inherit -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0063-mb-dell-gm45_latitudes-Add-E4300-variant.patch b/config/coreboot/default/patches/0063-mb-dell-gm45_latitudes-Add-E4300-variant.patch deleted file mode 100644 index 1e76adfe..00000000 --- a/config/coreboot/default/patches/0063-mb-dell-gm45_latitudes-Add-E4300-variant.patch +++ /dev/null @@ -1,332 +0,0 @@ -From bc9836ac2708687dfe43656adba2833493fa4199 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Thu, 26 Sep 2024 19:51:25 -0600 -Subject: [PATCH 63/65] mb/dell/gm45_latitudes: Add E4300 variant - -Change-Id: I0f2059501b11be103187e3ce1a7c04ab85ae63d2 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/gm45_latitude/Kconfig | 5 + - src/mainboard/dell/gm45_latitude/Kconfig.name | 3 + - .../gm45_latitude/variants/e4300/data.vbt | Bin 0 -> 3881 bytes - .../variants/e4300/gma-mainboard.ads | 17 +++ - .../dell/gm45_latitude/variants/e4300/gpio.c | 138 ++++++++++++++++++ - .../gm45_latitude/variants/e4300/hda_verb.c | 37 +++++ - .../variants/e4300/overridetree.cb | 10 ++ - 7 files changed, 210 insertions(+) - create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt - create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/gma-mainboard.ads - create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c - create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c - create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb - -diff --git a/src/mainboard/dell/gm45_latitude/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig -index ba76fb6e8c..144f9bcdf0 100644 ---- a/src/mainboard/dell/gm45_latitude/Kconfig -+++ b/src/mainboard/dell/gm45_latitude/Kconfig -@@ -21,6 +21,9 @@ config BOARD_DELL_GM45_LATITUDE_COMMON - config BOARD_DELL_E6400 - select BOARD_DELL_GM45_LATITUDE_COMMON - -+config BOARD_DELL_E4300 -+ select BOARD_DELL_GM45_LATITUDE_COMMON -+ - if BOARD_DELL_GM45_LATITUDE_COMMON - - config INTEL_GMA_DPLL_REF_FREQ -@@ -31,12 +34,14 @@ config MAINBOARD_DIR - - config MAINBOARD_PART_NUMBER - default "Latitude E6400" if BOARD_DELL_E6400 -+ default "Latitude E4300" if BOARD_DELL_E4300 - - config OVERRIDE_DEVICETREE - default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" - - config VARIANT_DIR - default "e6400" if BOARD_DELL_E6400 -+ default "e4300" if BOARD_DELL_E4300 - - config USBDEBUG_HCD_INDEX - default 1 -diff --git a/src/mainboard/dell/gm45_latitude/Kconfig.name b/src/mainboard/dell/gm45_latitude/Kconfig.name -index aefe777109..4dc95f46be 100644 ---- a/src/mainboard/dell/gm45_latitude/Kconfig.name -+++ b/src/mainboard/dell/gm45_latitude/Kconfig.name -@@ -1,4 +1,7 @@ - ## SPDX-License-Identifier: GPL-2.0-only - -+config BOARD_DELL_E4300 -+ bool "Latitude E4300" -+ - config BOARD_DELL_E6400 - bool "Latitude E6400" -diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt b/src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt -new file mode 100644 -index 0000000000000000000000000000000000000000..fa2f3db13f688b5687df16a155781d8674ea26f3 -GIT binary patch -literal 3881 -zcmdT`eQXp(6#wnV-R;foUbovquV-n84`GWGmlkRzXWaG>Td6>yG#51CN?M@?>DeM+ -zBI$}GlK6F+nD{}Y|ClJzh>3}Rm=N?2Y5aNhx3i7B*>RjEs#PQ-s5C6@#q~ze8SUuLOHbzw$htxKlQYWCt9NZmC -zVLO$_s2tQZ9MvqmM&%tUr>K0RF`T3FGnHSdOj6O}3>K9-D$(bpDh$)OQqAIh6jOwCxuw)qvS0N+Nk!? -zI~I-~3&u$!iZQuCQ3;=xYZQ&}1^JS!6aFCSvPt-}q{`KV7o=aLI=_ERh8gM+`g(-E -z9-*&C=<5;sdVc?y{2iwmrKs|~Kw5}Heji&vYYqJOG&As1`1?G0hsr2Y&r%2qq-H)u -z>=c836bj~sR4T<{m@IvjLaC(P1v(j%W}uLfs)L~qi^ -z4yaW6zjKK*SSa$dvbC#eRZDAgQ@dDEfr?l)G{1I8}OhGtOw#1e$Fn9wsUmbC8g}vF{$V$Y~rFp!qRJP)Z!2NYEhIpf^PzD_^ptxacQ#R+9@(N>ibe6 -z@|mz|d=bjIxSe3u0>+jxdmFQMG4?34k2C9i#y(>91!n!pSR`S$B&>T9Y*WHMl(1e% -zuvZiInS^yV!G28GmAbW9XHB~OfNnjavje*Qrfz+xvyXNAl5R-`OBnW@hPA<9+YI|D -z!+P0Z#|`^S!}`Hs7Yw^5X*DKUOVaL7TBAv}d|dV9^O8rYn%=4o&5GjdSWeb`yeyf7 -zk&0z-2#I*9^ljWL^79K!Ex#yORz2-nxRYGT$+NdKUcs>{SI2Fyx@<{2w?w*#&%hG* -zeY&DumV{4Nw4(1*^g5r`avbR44Nj-miiQs;Ii;O}*rL^|oYl8hQ9P@{Qf5}Gn;uRg -zI{c?gKNv~R$&eHj8!uus22Br_GkCD$Q)pf! -zGh%f}_&(hXOZrW-WCWJVw`DdrczV_sXGaOvzjt%F!O;{7J-K`tJBTNGZHe^T`VrkY0pv~u^?l~DG9UD8p8(692 Disabled); -+ -+end GMA.Mainboard; -diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c b/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c -new file mode 100644 -index 0000000000..b50f8da0b5 ---- /dev/null -+++ b/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c -@@ -0,0 +1,138 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+static const struct pch_gpio_set1 pch_gpio_set1_mode = { -+ .gpio0 = GPIO_MODE_NATIVE, -+ .gpio1 = GPIO_MODE_GPIO, -+ .gpio2 = GPIO_MODE_GPIO, -+ .gpio3 = GPIO_MODE_GPIO, -+ .gpio4 = GPIO_MODE_GPIO, -+ .gpio5 = GPIO_MODE_GPIO, -+ .gpio6 = GPIO_MODE_GPIO, -+ .gpio7 = GPIO_MODE_GPIO, -+ .gpio8 = GPIO_MODE_GPIO, -+ .gpio9 = GPIO_MODE_NATIVE, -+ .gpio10 = GPIO_MODE_NATIVE, -+ .gpio11 = GPIO_MODE_NATIVE, -+ .gpio12 = GPIO_MODE_NATIVE, -+ .gpio13 = GPIO_MODE_GPIO, -+ .gpio14 = GPIO_MODE_GPIO, -+ .gpio15 = GPIO_MODE_NATIVE, -+ .gpio16 = GPIO_MODE_NATIVE, -+ .gpio17 = GPIO_MODE_GPIO, -+ .gpio18 = GPIO_MODE_GPIO, -+ .gpio19 = GPIO_MODE_GPIO, -+ .gpio20 = GPIO_MODE_GPIO, -+ .gpio21 = GPIO_MODE_GPIO, -+ .gpio22 = GPIO_MODE_GPIO, -+ .gpio23 = GPIO_MODE_NATIVE, -+ .gpio24 = GPIO_MODE_GPIO, -+ .gpio25 = GPIO_MODE_NATIVE, -+ .gpio26 = GPIO_MODE_NATIVE, -+ .gpio27 = GPIO_MODE_GPIO, -+ .gpio28 = GPIO_MODE_GPIO, -+ .gpio29 = GPIO_MODE_NATIVE, -+ .gpio30 = GPIO_MODE_NATIVE, -+ .gpio31 = GPIO_MODE_NATIVE, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_direction = { -+ .gpio1 = GPIO_DIR_INPUT, -+ .gpio2 = GPIO_DIR_INPUT, -+ .gpio3 = GPIO_DIR_INPUT, -+ .gpio4 = GPIO_DIR_INPUT, -+ .gpio5 = GPIO_DIR_INPUT, -+ .gpio6 = GPIO_DIR_INPUT, -+ .gpio7 = GPIO_DIR_INPUT, -+ .gpio8 = GPIO_DIR_INPUT, -+ .gpio13 = GPIO_DIR_INPUT, -+ .gpio14 = GPIO_DIR_INPUT, -+ .gpio17 = GPIO_DIR_INPUT, -+ .gpio18 = GPIO_DIR_INPUT, -+ .gpio19 = GPIO_DIR_INPUT, -+ .gpio20 = GPIO_DIR_INPUT, -+ .gpio21 = GPIO_DIR_INPUT, -+ .gpio22 = GPIO_DIR_INPUT, -+ .gpio24 = GPIO_DIR_INPUT, -+ .gpio27 = GPIO_DIR_INPUT, -+ .gpio28 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_level = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_blink = { -+}; -+ -+static const struct pch_gpio_set1 pch_gpio_set1_invert = { -+ .gpio1 = GPIO_INVERT, -+ .gpio7 = GPIO_INVERT, -+ .gpio8 = GPIO_INVERT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_mode = { -+ .gpio32 = GPIO_MODE_NATIVE, -+ .gpio33 = GPIO_MODE_GPIO, -+ .gpio34 = GPIO_MODE_GPIO, -+ .gpio35 = GPIO_MODE_NATIVE, -+ .gpio36 = GPIO_MODE_GPIO, -+ .gpio37 = GPIO_MODE_GPIO, -+ .gpio38 = GPIO_MODE_GPIO, -+ .gpio39 = GPIO_MODE_GPIO, -+ .gpio40 = GPIO_MODE_NATIVE, -+ .gpio41 = GPIO_MODE_NATIVE, -+ .gpio42 = GPIO_MODE_NATIVE, -+ .gpio43 = GPIO_MODE_NATIVE, -+ .gpio44 = GPIO_MODE_NATIVE, -+ .gpio45 = GPIO_MODE_NATIVE, -+ .gpio46 = GPIO_MODE_NATIVE, -+ .gpio47 = GPIO_MODE_NATIVE, -+ .gpio48 = GPIO_MODE_GPIO, -+ .gpio49 = GPIO_MODE_GPIO, -+ .gpio50 = GPIO_MODE_NATIVE, -+ .gpio51 = GPIO_MODE_NATIVE, -+ .gpio52 = GPIO_MODE_GPIO, -+ .gpio53 = GPIO_MODE_GPIO, -+ .gpio54 = GPIO_MODE_NATIVE, -+ .gpio55 = GPIO_MODE_NATIVE, -+ .gpio56 = GPIO_MODE_GPIO, -+ .gpio57 = GPIO_MODE_GPIO, -+ .gpio58 = GPIO_MODE_NATIVE, -+ .gpio59 = GPIO_MODE_NATIVE, -+ .gpio60 = GPIO_MODE_GPIO, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_direction = { -+ .gpio33 = GPIO_DIR_INPUT, -+ .gpio34 = GPIO_DIR_INPUT, -+ .gpio36 = GPIO_DIR_INPUT, -+ .gpio37 = GPIO_DIR_INPUT, -+ .gpio38 = GPIO_DIR_INPUT, -+ .gpio39 = GPIO_DIR_INPUT, -+ .gpio48 = GPIO_DIR_INPUT, -+ .gpio49 = GPIO_DIR_INPUT, -+ .gpio52 = GPIO_DIR_INPUT, -+ .gpio53 = GPIO_DIR_INPUT, -+ .gpio56 = GPIO_DIR_INPUT, -+ .gpio57 = GPIO_DIR_INPUT, -+ .gpio60 = GPIO_DIR_INPUT, -+}; -+ -+static const struct pch_gpio_set2 pch_gpio_set2_level = { -+}; -+ -+const struct pch_gpio_map mainboard_gpio_map = { -+ .set1 = { -+ .mode = &pch_gpio_set1_mode, -+ .direction = &pch_gpio_set1_direction, -+ .level = &pch_gpio_set1_level, -+ .blink = &pch_gpio_set1_blink, -+ .invert = &pch_gpio_set1_invert, -+ }, -+ .set2 = { -+ .mode = &pch_gpio_set2_mode, -+ .direction = &pch_gpio_set2_direction, -+ .level = &pch_gpio_set2_level, -+ }, -+}; -diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c b/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c -new file mode 100644 -index 0000000000..a9948a93dd ---- /dev/null -+++ b/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c -@@ -0,0 +1,37 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+ -+const u32 cim_verb_data[] = { -+ /* coreboot specific header */ -+ 0x111d76b2, /* IDT 92HD71B7X */ -+ 0x1028024d, /* Subsystem ID */ -+ 13, /* Number of entries */ -+ -+ /* Pin Widget Verb Table */ -+ -+ AZALIA_PIN_CFG(0, 0x0a, 0x0421101f), -+ AZALIA_PIN_CFG(0, 0x0b, 0x04a11021), -+ AZALIA_PIN_CFG(0, 0x0c, 0x40f000f0), -+ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), -+ AZALIA_PIN_CFG(0, 0x0e, 0x23a1102e), -+ AZALIA_PIN_CFG(0, 0x0f, 0x23011050), -+ AZALIA_PIN_CFG(0, 0x14, 0x40f000f2), -+ AZALIA_PIN_CFG(0, 0x18, 0x90a601a0), -+ AZALIA_PIN_CFG(0, 0x19, 0x40f000f4), -+ AZALIA_PIN_CFG(0, 0x1e, 0x40f000f5), -+ AZALIA_PIN_CFG(0, 0x1f, 0x40f000f6), -+ AZALIA_PIN_CFG(0, 0x20, 0x40f000f7), -+ AZALIA_PIN_CFG(0, 0x27, 0x40f000f0), -+}; -+ -+const u32 pc_beep_verbs[] = { -+ 0x00170500, /* power up codec */ -+ 0x00d70500, /* power up speakers */ -+ 0x00d70102, /* select mixer (input 0x2) for speakers */ -+ 0x00d70740, /* enable speakers output */ -+ 0x02770720, /* enable beep input */ -+ 0x01737217, /* unmute beep (mixer's input 0x2), set amp 0dB */ -+ 0x00d37000, /* unmute speakers */ -+}; -+AZALIA_ARRAY_SIZES; -diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb b/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb -new file mode 100644 -index 0000000000..20dfa245fb ---- /dev/null -+++ b/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb -@@ -0,0 +1,10 @@ -+## SPDX-License-Identifier: GPL-2.0-or-later -+ -+chip northbridge/intel/gm45 -+ device domain 0 on -+ subsystemid 0x1028 0x024d inherit -+ chip southbridge/intel/i82801ix -+ device pci 1c.2 off end # PCIe Port #3 -+ end -+ end -+end --- -2.39.5 - diff --git a/config/coreboot/default/patches/0066-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch b/config/coreboot/default/patches/0066-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch deleted file mode 100644 index d58968a1..00000000 --- a/config/coreboot/default/patches/0066-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 0fe1d4b9fe56a0f27a6ff39cfb94d63559b729b8 Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Fri, 3 May 2024 16:31:12 -0600 -Subject: [PATCH 66/67] mb/dell: Add S3 SMI handler for Dell Latitudes - -Integrate the previously added mec5035_smi_sleep() function into -mainboard code to fix S3 suspend on the SNB/IVB Latitudes and the E7240. -The E6400 does not require the EC command to sucessfully suspend and -resume from S3, though sending it does enable the breathing effect on -the power LED while in S3. Without it, all LEDs turn off during S3. - -Change-Id: Ic0d887f75be13c3fb9f6df62153ac458895e0283 -Signed-off-by: Nicholas Chin ---- - src/mainboard/dell/e7240/smihandler.c | 9 +++++++++ - src/mainboard/dell/gm45_latitude/smihandler.c | 9 +++++++++ - src/mainboard/dell/snb_ivb_latitude/smihandler.c | 9 +++++++++ - 3 files changed, 27 insertions(+) - create mode 100644 src/mainboard/dell/e7240/smihandler.c - create mode 100644 src/mainboard/dell/gm45_latitude/smihandler.c - create mode 100644 src/mainboard/dell/snb_ivb_latitude/smihandler.c - -diff --git a/src/mainboard/dell/e7240/smihandler.c b/src/mainboard/dell/e7240/smihandler.c -new file mode 100644 -index 0000000000..00e55b51db ---- /dev/null -+++ b/src/mainboard/dell/e7240/smihandler.c -@@ -0,0 +1,9 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+ -+void mainboard_smi_sleep(u8 slp_typ) -+{ -+ mec5035_smi_sleep(slp_typ); -+} -diff --git a/src/mainboard/dell/gm45_latitude/smihandler.c b/src/mainboard/dell/gm45_latitude/smihandler.c -new file mode 100644 -index 0000000000..00e55b51db ---- /dev/null -+++ b/src/mainboard/dell/gm45_latitude/smihandler.c -@@ -0,0 +1,9 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+ -+void mainboard_smi_sleep(u8 slp_typ) -+{ -+ mec5035_smi_sleep(slp_typ); -+} -diff --git a/src/mainboard/dell/snb_ivb_latitude/smihandler.c b/src/mainboard/dell/snb_ivb_latitude/smihandler.c -new file mode 100644 -index 0000000000..00e55b51db ---- /dev/null -+++ b/src/mainboard/dell/snb_ivb_latitude/smihandler.c -@@ -0,0 +1,9 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#include -+#include -+ -+void mainboard_smi_sleep(u8 slp_typ) -+{ -+ mec5035_smi_sleep(slp_typ); -+} --- -2.47.0 - diff --git a/config/coreboot/default/patches/0067-ec-dell-mec5035-Route-power-button-event-to-host.patch b/config/coreboot/default/patches/0067-ec-dell-mec5035-Route-power-button-event-to-host.patch deleted file mode 100644 index d8662e40..00000000 --- a/config/coreboot/default/patches/0067-ec-dell-mec5035-Route-power-button-event-to-host.patch +++ /dev/null @@ -1,92 +0,0 @@ -From 32118fa1d21fad517f85cee5eb4edff5f2fd91ea Mon Sep 17 00:00:00 2001 -From: Nicholas Chin -Date: Tue, 18 Jun 2024 21:31:08 -0600 -Subject: [PATCH 67/67] ec/dell/mec5035: Route power button event to host - -If command 0x3e with an argument of 1 isn't sent to the EC, pressing the -power button results in the EC powering off the system without letting -the OS cleanly shutting itself down. This command and argument tells the -EC to route power button events to the host so that it can determine -what to do. - -The EC command was identified from the ec/google/wilco code, which is -used for Dell's Latitude Chromebooks. According to the EC_GOOGLE_WILCO -Kconfig help text, those ECs run a modified version of Dell's typical -Latitude EC firmware, so it is likely that the two firmware -implementations use similar commands. Examining LPC traffic between the -host and the EC on the Latitude E6400 did reveal that the same command -was being sent by the vendor firmware to the EC, but this does not -confirm that it has the same meaning as the command from the Wilco code. -Sending the command using inb/outb calls in a userspace C program while -running coreboot without this patch did allow subsequent power button -events to be handled by the host, confirming that the command was indeed -the same. - -Change-Id: I5ded315270c0e1efbbc90cfa9d9d894b872e99a2 -Signed-off-by: Nicholas Chin ---- - src/ec/dell/mec5035/mec5035.c | 8 ++++++++ - src/ec/dell/mec5035/mec5035.h | 7 +++++++ - 2 files changed, 15 insertions(+) - -diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c -index 85c2ab0140..bdae929a27 100644 ---- a/src/ec/dell/mec5035/mec5035.c -+++ b/src/ec/dell/mec5035/mec5035.c -@@ -94,6 +94,13 @@ void mec5035_control_radio(enum ec_radio_dev dev, enum ec_radio_state state) - ec_command(CMD_RADIO_CTRL); - } - -+void mec5035_power_button_route(enum ec_power_button_route target) -+{ -+ u8 buf = (u8)target; -+ write_mailbox_regs(&buf, 2, 1); -+ ec_command(CMD_POWER_BUTTON_TO_HOST); -+} -+ - void mec5035_change_wake(u8 source, enum ec_wake_change change) - { - u8 buf[ACPI_WAKEUP_NUM_ARGS] = {change, source, 0, 0x40}; -@@ -121,6 +128,7 @@ static void mec5035_init(struct device *dev) - /* Unconditionally use this argument for now as this setting - is probably the most sensible default out of the 3 choices. */ - mec5035_mouse_touchpad(TP_PS2_MOUSE); -+ mec5035_power_button_route(HOST); - - pc_keyboard_init(NO_AUX_DEVICE); - -diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h -index 8d4fded28b..51422598c4 100644 ---- a/src/ec/dell/mec5035/mec5035.h -+++ b/src/ec/dell/mec5035/mec5035.h -@@ -11,6 +11,7 @@ - enum mec5035_cmd { - CMD_MOUSE_TP = 0x1a, - CMD_RADIO_CTRL = 0x2b, -+ CMD_POWER_BUTTON_TO_HOST = 0x3e, - CMD_ACPI_WAKEUP_CHANGE = 0x4a, - CMD_SLEEP_ENABLE = 0x64, - CMD_CPU_OK = 0xc2, -@@ -36,6 +37,11 @@ enum ec_radio_state { - RADIO_ON - }; - -+enum ec_power_button_route { -+ EC = 0, -+ HOST -+}; -+ - #define ACPI_WAKEUP_NUM_ARGS 4 - enum ec_wake_change { - WAKE_OFF = 0, -@@ -55,6 +61,7 @@ u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting); - void mec5035_cpu_ok(void); - void mec5035_early_init(void); - void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state); -+void mec5035_power_button_route(enum ec_power_button_route target); - void mec5035_change_wake(u8 source, enum ec_wake_change change); - void mec5035_sleep_enable(void); - --- -2.47.0 - -- cgit v1.2.1