From 2f3cc5d379089d3def876fdc276c321236b0698f Mon Sep 17 00:00:00 2001
From: Leah Rowe <leah@libreboot.org>
Date: Sat, 6 Jul 2024 23:36:13 +0100
Subject: rom.sh: new file, to replace script/roms

stub it from the trees script. the way it works now,
there is less code in the build system.

./build roms

this is no longer a thing

./build roms serprog

this is also no longer a thing. instead, do:

./update trees -b coreboot targetnamehere

./update trees -b pico-serprog

./update trees -b stm32-vserprog

the old commands still works, which causes the new
commands to run

coreboot roms now appear in elf/, not bin/, as before,
but those images now contain payloads.

NOTE: to contradict the above: ./build roms is no
longer a thing, in that it's now deprecated, but
backward compatibility is present for now. it will
be removed in a future release.

./build roms list also still works! it will do:
./update trees -b coreboot list

also:
./update trees -b grub list
this is now possible too

if a target "list" is provided, for multi-tree sources,
the targets are shown.

there is another difference: seagrub roms are now seagrub_,
instead of seabios_withgrub.

seabios-only roms are no longer provided, where grub is also
enabled; only seagrub is used. the user can easily remove
the bootorder file, if they want seabios to not try grub first.

Signed-off-by: Leah Rowe <leah@libreboot.org>
---
 build                                   |  14 ++-
 config/data/coreboot/build.list         |   1 -
 config/data/coreboot/mkhelper.cfg       |  11 ++
 config/data/pico-serprog/mkhelper.cfg   |   5 +
 config/data/stm32-vserprog/mkhelper.cfg |   4 +
 include/lib.sh                          |   1 -
 include/rom.sh                          | 122 ++++++++++++++++++++
 include/vendor.sh                       |   2 +-
 script/roms                             | 190 --------------------------------
 script/trees                            |  42 +++----
 10 files changed, 170 insertions(+), 222 deletions(-)
 delete mode 100644 config/data/coreboot/build.list
 create mode 100644 config/data/pico-serprog/mkhelper.cfg
 create mode 100644 config/data/stm32-vserprog/mkhelper.cfg
 create mode 100644 include/rom.sh
 delete mode 100755 script/roms

diff --git a/build b/build
index 91843d3f..d03960c6 100755
--- a/build
+++ b/build
@@ -16,7 +16,7 @@ fi
 . "include/vendor.sh"
 . "include/mrc.sh"
 
-eval `setvars "" vdir src_dirname srcdir mode xp`
+eval `setvars "" vdir src_dirname srcdir mode xp ser`
 err="fail"
 
 main()
@@ -34,6 +34,12 @@ main()
 	release) shift 1; mkrelease $@ ;;
 	inject) shift 1; vendor_inject $@ ;;
 	download) shift 1; vendor_download $@ ;;
+	roms)
+		if [ $# -gt 1 ] && [ "$2" = "serprog" ]; then
+			x_ ./update trees -b stm32-vserprog
+			x_ ./update trees -b pico-serprog; return 0
+		fi; shift 1
+		x_ ./update trees -b coreboot $@ ;;
 	*)
 		[ -f "$spath" ] || $err "bad command"
 		shift 1; "$spath" $@ || $err "excmd: $spath $@" ;;
@@ -111,9 +117,9 @@ build_release()
 
 	(
 	cd "$srcdir" || $err "$vdir: 2 !cd \"$srcdir\""
-	./build roms all || $err "$vdir: roms-all"
-	./build roms serprog rp2040 || $err "$vdir: rp2040"
-	./build roms serprog stm32 || $err "$vdir: stm32"
+	./update trees -b coreboot || $err "$vdir: roms-all"
+	./update trees -b pico-serprog || $err "$vdir: rp2040"
+	./update trees -b stm32-vserprog || $err "$vdir: stm32"
 	x_ mv bin ../roms
 	) || $err "can't build rom images"
 
diff --git a/config/data/coreboot/build.list b/config/data/coreboot/build.list
deleted file mode 100644
index f6535149..00000000
--- a/config/data/coreboot/build.list
+++ /dev/null
@@ -1 +0,0 @@
-build/coreboot.rom
diff --git a/config/data/coreboot/mkhelper.cfg b/config/data/coreboot/mkhelper.cfg
index a6605672..c23ebdf4 100644
--- a/config/data/coreboot/mkhelper.cfg
+++ b/config/data/coreboot/mkhelper.cfg
@@ -1,2 +1,13 @@
 makeargs="UPDATED_SUBMODULES=1 CPUS=$XBMK_THREADS"
 build_depend="seabios/default grub/default memtest86plus"
+
+seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
+
+pv="payload_uboot payload_seabios payload_memtest payload_grub"
+v="initmode ubootelf grub_scan_disk uboot_config grubtree grubelf pname"
+v="$v displaymode tmprom"
+eval `setvars "n" $pv`
+eval `setvars "" $v`
+
+mkhelper="mkcorebootbin"
+postmake="mkcoreboottar"
diff --git a/config/data/pico-serprog/mkhelper.cfg b/config/data/pico-serprog/mkhelper.cfg
new file mode 100644
index 00000000..9f6e54cc
--- /dev/null
+++ b/config/data/pico-serprog/mkhelper.cfg
@@ -0,0 +1,5 @@
+sersrc="src/pico-serprog"
+serx="$sersrc/build/pico_serprog.uf2"
+picosdk="src/pico-sdk"
+serdir="$picosdk/src/boards/include/boards"
+premake="mkserprog rp2040"
diff --git a/config/data/stm32-vserprog/mkhelper.cfg b/config/data/stm32-vserprog/mkhelper.cfg
new file mode 100644
index 00000000..9d02f799
--- /dev/null
+++ b/config/data/stm32-vserprog/mkhelper.cfg
@@ -0,0 +1,4 @@
+sersrc="src/stm32-vserprog"
+serx="$sersrc/stm32-vserprog.hex"
+serdir="$sersrc/boards"
+mkhelper="mkserprog stm32"
diff --git a/include/lib.sh b/include/lib.sh
index e6a998d2..52187734 100755
--- a/include/lib.sh
+++ b/include/lib.sh
@@ -10,7 +10,6 @@ _ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0"
 kbnotice="Insert a .gkb file from config/data/grub/keymap/ as keymap.gkb \
 if you want a custom keymap in GRUB; use cbfstool from elf/cbfstool."
 
-cbelfdir="elf/.coreboot_nopayload_DO_NOT_FLASH"
 ifdtool="elf/ifdtool/default/ifdtool"
 cbfstool="elf/cbfstool/default/cbfstool"
 tmpgit="$PWD/tmp/gitclone"
diff --git a/include/rom.sh b/include/rom.sh
new file mode 100644
index 00000000..7ffd685d
--- /dev/null
+++ b/include/rom.sh
@@ -0,0 +1,122 @@
+#!/usr/bin/env sh
+# SPDX-License-Identifier: GPL-3.0-or-later
+# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
+# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
+# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
+# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
+# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
+
+mkserprog()
+{
+	basename -as .h "$serdir/"*.h > "$TMPDIR/ser" || $err "!mk $1 $TMPDIR"
+
+	while read -r sertarget; do
+		[ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$sertarget" \
+		    -DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" \
+		    && x_ cmake --build "$sersrc/build"
+		[ "$1" = "stm32" ] && x_ make -C "$sersrc" \
+		    libopencm3-just-make BOARD=$sertarget && x_ make -C \
+		    "$sersrc" BOARD=$sertarget; x_ mkdir -p "bin/serprog_$1"
+		x_ mv "$serx" "bin/serprog_$1/serprog_$sertarget.${serx##*.}"
+	done < "$TMPDIR/ser"
+
+	[ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/serprog_$1"; return 0
+}
+
+mkpayload_grub()
+{
+	eval `setvars "" grub_modules grub_install_modules`
+	eval `setcfg "$grubdata/module/$tree"`
+
+	x_ rm -f "$cdir/grub.elf"
+
+	"${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \
+	    -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \
+	    --fonts= --themes= --locales=  --modules="$grub_modules" \
+	    --install-modules="$grub_install_modules" \
+	    "/boot/grub/grub_default.cfg=${cdir}/.config" \
+	    "/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \
+	    "/background.png=$grubdata/background/background1280x800.png" || \
+	    $err "$tree: cannot build grub.elf"; return 0
+}
+
+mkcorebootbin()
+{
+	[ "$target" = "$tree" ] && return 0
+
+	tmprom="$cdir/build/coreboot.rom"
+	initmode="${defconfig##*/}"; displaymode="${initmode##*_}"
+	initmode="${initmode%%_*}"
+	[ -n "$displaymode" ] && displaymode="_$displaymode"
+	cbfstool="elf/cbfstool/$tree/cbfstool"
+
+	[ -n "$uboot_config" ] || uboot_config="default"
+	[ "$payload_uboot" = "y" ] || payload_seabios="y"
+	[ "$payload_grub" = "y" ] && payload_seabios="y"
+	[ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \
+	    $err "$target: U-Boot and SeaBIOS/GRUB are both enabled."
+
+	[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
+
+	[ -n "$grubtree" ] || grubtree="default"
+	grubelf="elf/grub/$grubtree/payload/grub.elf"
+
+	[ "$payload_memtest" = "y" ] || payload_memtest="n"
+	[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
+
+	x_ ./update trees -b coreboot utils $tree
+
+	[ "$payload_seabios" = "y" ] && pname="seabios" && add_seabios
+	[ "$payload_uboot" = "y" ] && pname="uboot" && add_uboot
+
+	newrom="bin/$target/${pname}_${target}_$initmode$displaymode.rom"
+	x_ mkdir -p "${newrom%/*}"; x_ mv "$tmprom" "$newrom"
+
+	[ "$XBMK_RELEASE" = "y" ] || return 0
+	mksha512sum "$newrom" "vendorhashes"
+	./vendor inject -r "$newrom" -b "$target" -n nuke || $err "!n $newrom"
+}
+
+add_seabios()
+{
+	_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
+
+	cbfs "$tmprom" "$_seabioself" "fallback/payload"
+	x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
+
+	_z="2"; [ "$initmode" = "vgarom" ] && _z="0"
+	x_ "$cbfstool" "$tmprom" add-int -i $_z -n etc/pci-optionrom-exec
+	x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
+	[ "$initmode" = "libgfxinit" ] && \
+	    cbfs "$tmprom" "$seavgabiosrom" vgaroms/seavgabios.bin raw
+
+	[ "$payload_memtest" = "y" ] && cbfs "$tmprom" \
+	    "elf/memtest86plus/memtest.bin" img/memtest
+
+	[ "$payload_grub" = "y" ] && pname="seagrub" && add_grub; return 0
+}
+
+add_grub()
+{
+	cbfs "$tmprom" "$grubelf" "img/grub2"
+	printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
+	    > "$TMPDIR/tmpcfg" || $err "$target: !insert scandisk"
+	cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw
+	cbfs "$tmprom" "$grubdata/bootorder" bootorder raw
+}
+
+add_uboot()
+{
+	ubdir="elf/u-boot/$target/$uboot_config"
+	ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
+	    ubootelf="$ubdir/u-boot"
+	[ -f "$ubootelf" ] || $err "cb/$target: Can't find u-boot"
+
+	cbfs "$tmprom" "$ubootelf" "fallback/payload"
+}
+
+mkcoreboottar()
+{
+	[ "$target" = "$tree" ] && return 0
+	[ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$target"; return 0
+}
diff --git a/include/vendor.sh b/include/vendor.sh
index e282eedd..75f7e051 100755
--- a/include/vendor.sh
+++ b/include/vendor.sh
@@ -248,7 +248,7 @@ detect_board()
 	path="$1"
 	filename="$(basename "$path")"
 	case "$filename" in
-	grub_*) board="$(echo "$filename" | cut -d '_' -f2-3)" ;;
+	grub_*|seagrub_*) board="$(echo "$filename" | cut -d '_' -f2-3)" ;;
 	seabios_withgrub_*)
 		board="$(echo "$filename" | cut -d '_' -f3-4)" ;;
 	*.tar.xz)
diff --git a/script/roms b/script/roms
deleted file mode 100755
index 14822339..00000000
--- a/script/roms
+++ /dev/null
@@ -1,190 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-or-later
-# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
-# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
-# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com>
-
-set -u -e
-
-. "include/lib.sh"
-
-tmprom="$TMPDIR/rom"
-
-seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
-cfgsdir="config/coreboot"
-rp2040src="src/pico-serprog"
-rp2040x="$rp2040src/build/pico_serprog.uf2"
-picosdk="src/pico-sdk"
-rp2040dir="$picosdk/src/boards/include/boards"
-stm32src="src/stm32-vserprog"
-stm32x="$stm32src/stm32-vserprog.hex"
-stm32dir="$stm32src/boards"
-
-# Disable all payloads by default.
-# target.cfg files have to specifically enable [a] payload(s)
-pv="payload_uboot payload_seabios payload_memtest payload_grub"
-v="romdir initmode displaymode targetdir tree release ubootelf"
-v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv"
-eval `setvars "n" $pv`
-eval `setvars "" $v boards targets serdir ser`
-
-main()
-{
-	while [ $# -gt 0 ]; do
-		if [ "$1" = "serprog" ]; then
-			[ $# -lt 2 ] && $err "serprog type not set"
-			[ "$2" != "rp2040" ] && [ "$2" != "stm32" ] && \
-			    $err "invalid serprog type"
-			eval "x_ ./update trees -f \"\${${2}src##*/}\""
-			ser="$2" && shift 2 && continue
-		fi
-		[ "$1$ser" = "list" ] && x_ ls -1 config/coreboot && return 0
-		[ "$1" = "all" ] && shift 1 && continue
-		boards="$1 $boards"; shift 1
-	done
-
-	[ -n "$boards" ] || [ -n "$ser" ] || boards="$(ls -1 \
-	    config/coreboot)" || $err "can't list coreboot boards"
-
-	[ -n "$ser" ] && \
-	    eval "serlist \"\$${ser}dir\" > \"\$TMPDIR/ser\" || $err \"!ser\""
-	[ -n "$ser" ] && [ -z "$boards" ] && boards="$(cat "$TMPDIR/ser")"
-
-	for x in $boards; do
-		[ -n "$ser" ] && mkserprogfw "$ser" "$x"
-		[ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \
-		    configure_target "$x" && build_roms && \
-		    [ -d "bin/$board" ] && targets="$targets, $x" && \
-		    [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$x"
-	done
-
-	[ -n "$ser" ] && [ "$XBMK_RELEASE" = "y" ] && \
-	    mkrom_tarball "bin/serprog_$ser" && return 0
-
-	[ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled"
-	[ -z "$ser" ] && printf "ROMs built in bin/ for: %s\n" "${targets#, }"
-	[ -n "$ser" ] && printf "ROMs (serprog) built in bin/%s/\n" "$ser"
-	printf "Please flash from bin/, NOT elf/ - ALSO:\n%s\n" "$kbnotice"
-}
-
-mkserprogfw()
-{
-	x_ mkdir -p "bin/serprog_$1"
-	[ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \
-	    -DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \
-	    x_ cmake --build "$rp2040src/build"
-	[ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \
-	    BOARD=$2 && x_ make -C "$stm32src" BOARD=$2
-	eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\""
-}
-
-serlist()
-{
-	basename -a -s .h "$1/"*.h || $err "$1: can't list boards"
-}
-
-configure_target()
-{
-	eval `setvars "n" $pv`
-	eval `setvars "" $v`
-
-	board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board"
-
-	# Override the above defaults using target.cfg
-	eval `setcfg "$targetdir/target.cfg"`
-
-	[ -z "$tree" ] && $err "$board: tree not defined"
-	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1
-	[ "$board" = "$tree" ] && return 1
-
-	x_ ./update trees -b coreboot $board
-
-	cbfstool="elf/cbfstool/$tree/cbfstool"
-	x_ ./update trees -b coreboot utils $tree
-
-	[ -n "$uboot_config" ] || uboot_config="default"
-	[ "$payload_uboot" = "y" ] || payload_seabios="y"
-	[ "$payload_grub" = "y" ] && payload_seabios="y"
-	[ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \
-	    $err "$board: U-Boot and SeaBIOS/GRUB are both enabled."
-
-	[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
-
-	[ -n "$grubtree" ] || grubtree="default"
-	grubelf="elf/grub/$grubtree/payload/grub.elf"
-
-	[ "$payload_memtest" = "y" ] || payload_memtest="n"
-	[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0
-}
-
-build_roms()
-{
-	x_ rm -Rf "$romdir"
-
-	for cbcfg in "$targetdir/config/"*; do
-		[ -f "$cbcfg" ] || continue; cn="${cbcfg##*/}"; dt="${cn#*_}" \
-		    && [ "$dt" = "$cn" ] && dt="txtmode"; displaymode="$dt"
-		initmode="${cn%%_*}"; chkvars initmode displaymode
-		e "$cbcfg" f not || add_payloads
-	done; x_ rm -f "$tmprom"
-}
-
-add_payloads()
-{
-	cbuild="$cbelfdir/$board/${initmode}_$displaymode"
-	[ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}"
-	x_ cp "$cbuild/coreboot.rom" "$tmprom"
-
-	[ "$payload_seabios" = "y" ] && add_seabios_payload
-	[ "$payload_uboot" = "y" ] || return 0
-
-	ubdir="elf/u-boot/$board/$uboot_config"; ubootelf="$ubdir/u-boot.elf" \
-	    && [ ! -f "$ubootelf" ] && ubootelf="$ubdir/u-boot"
-	[ -f "$ubootelf" ] || $err "$board: Can't find u-boot"
-
-	cbfs "$tmprom" "$ubootelf" "fallback/payload"
-	cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom"
-}
-
-add_seabios_payload()
-{
-	_seabioself="elf/seabios/default/$initmode/bios.bin.elf"
-
-	pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub"
-	newrom="$romdir/${pstr}_${board}_$initmode.rom"
-	[ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom"
-
-	cbfs "$tmprom" "$_seabioself" "fallback/payload"
-	x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
-
-	z="2"; [ "$initmode" = "vgarom" ] && z="0"
-	x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
-	x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
-	[ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \
-	    vgaroms/seavgabios.bin raw
-
-	if [ "$payload_grub" = "y" ]; then
-		cbfs "$tmprom" "$grubelf" "img/grub2"
-		printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
-		    > "$TMPDIR/tmpcfg" || $err "$board: !insert scandisk"
-		cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw
-	fi
-
-	[ "$payload_memtest" = "y" ] && \
-	    cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest
-
-	cprom "$newrom" && [ "$payload_grub" = "y" ] && \
-	    cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \
-	    cprom "${newrom%.rom}_grubfirst.rom"; return 0
-}
-
-cprom()
-{
-	x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1"
-	[ "$XBMK_RELEASE" = "y" ] && mksha512sum "$1" "vendorhashes" && \
-	    x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0
-}
-
-main $@
diff --git a/script/trees b/script/trees
index ab321869..8bcd798c 100755
--- a/script/trees
+++ b/script/trees
@@ -8,10 +8,15 @@ set -u -e
 
 . "include/lib.sh"
 . "include/git.sh"
+. "include/rom.sh"
+
+. "config/data/pico-serprog/mkhelper.cfg"
+. "config/data/coreboot/mkhelper.cfg"
 
 eval `setvars "" xarch cdir defconfig cmakedir xlang mode makeargs elfdir cmd \
     project target target_dir targets xtree _f target1 bootstrapargs mkhelper \
-    autoconfargs listfile autogenargs btype tree rev tree_depend build_depend`
+    autoconfargs listfile autogenargs btype tree rev tree_depend build_depend \
+    premake release postmake`
 
 main()
 {
@@ -46,6 +51,7 @@ main()
 	datadir="config/data/$project"
 	cfgsdir="config/$project"
 	listfile="$datadir/build.list" # needed on multi, optional on single
+	[ -f "$listfile" ] || listfile="" # optional on all projects
 
 	remkdir "${tmpgit%/*}"
 
@@ -61,7 +67,6 @@ main()
 build_project()
 {
 	configure_project "$cfgsdir" || return 0
-	[ -f "$listfile" ] || listfile="" # optional on single-tree
 
 	dest_dir="$elfdir"
 	[ ! -f "$listfile" ] || elfcheck || return 0
@@ -77,10 +82,7 @@ build_project()
 
 build_targets()
 {
-	[ "$elfdir" = "elf/coreboot" ] && elfdir="$cbelfdir"
-
 	[ -d "$cfgsdir" ] || $err "directory, $cfgsdir, does not exist"
-	[ -f "$listfile" ] || $err "list file, $listfile, does not exist"
 
 	# Build for all targets if no argument is given
 	[ $# -gt 0 ] && target1="$1"
@@ -94,12 +96,16 @@ build_targets()
 handle_targets()
 {
 	for x in $targets; do
+		[ "$x" = "list" ] && x_ ls -1 "config/$project" && \
+		    listfile="" && break
 		target="$x"
 		printf "'make %s', '%s', '%s'\n" "$mode" "$project" "$target"
 		[ "$project" != "coreboot" ] || [ -n "$mode" ] || \
 		    [ "$target1" = "utils" ] || x_ ./vendor download $target
 		x_ handle_defconfig
-	done
+		[ -n "$mode" ] || [ -z "$postmake" ] || $postmake || \
+		    $err "$project/$target: !postmake: $postmake"; continue
+	done; return 0
 }
 
 handle_defconfig()
@@ -141,8 +147,8 @@ handle_src_tree()
 
 configure_project()
 {
-	eval `setvars "" xarch xlang bootstrapargs autoconfargs xtree \
-	    tree_depend makeargs btype mkhelper build_depend`
+	eval `setvars "" xarch xlang build_depend autoconfargs xtree postmake \
+	    tree_depend makeargs btype mkhelper bootstrapargs premake release`
 	[ -f "$1/target.cfg" ] || btype="auto"
 	[ -f "$datadir/mkhelper.cfg" ] && eval `setcfg "$datadir/mkhelper.cfg"`
 
@@ -159,6 +165,7 @@ configure_project()
 		    && break; _tcfg="${_tcfg%/*/target.cfg}/$tree/target.cfg"
 	done
 
+	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1
 	[ -z "$btype" ] || [ "${mode%config}" = "$mode" ] || return 1
 
 	[ -z "$mode" ] && for bd in $build_depend; do
@@ -244,6 +251,8 @@ handle_makefile()
 
 run_make_command()
 {
+	[ -z "$premake" ] || [ -n "$mode" ] || $premake || $err "!$premake"
+
 	check_cmake "$cdir" && [ -z "$mode" ] && check_autoconf "$cdir"
 	check_makefile "$cdir" || return 1
 
@@ -280,23 +289,6 @@ check_makefile()
 	    [ -f "$1/GNUmakefile" ] || return 1; return 0
 }
 
-mkpayload_grub()
-{
-	eval `setvars "" grub_modules grub_install_modules`
-	eval `setcfg "$grubdata/module/$tree"`
-
-	x_ rm -f "$cdir/grub.elf"
-
-	"${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \
-	    -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \
-	    --fonts= --themes= --locales=  --modules="$grub_modules" \
-	    --install-modules="$grub_install_modules" \
-	    "/boot/grub/grub_default.cfg=${cdir}/.config" \
-	    "/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \
-	    "/background.png=$grubdata/background/background1280x800.png" || \
-	    $err "$tree: cannot build grub.elf"; return 0
-}
-
 copy_elf()
 {
 	[ -f "$listfile" ] && x_ mkdir -p "$dest_dir" && while read -r f; do
-- 
cgit v1.2.1