summaryrefslogtreecommitdiff
path: root/config
AgeCommit message (Collapse)Author
11 daysAdd SPD support for onboard ThinkPad T480S RAMLeah Rowe
Patchset 20 from: https://review.coreboot.org/c/coreboot/+/83274/18..20 Updated to that. A bunch of changes I made locally have been copied here, thus removed from lbmk. The previous setup in lbmk was to have only the DIMM slot work, on the ThinkPad T480S, without setting up SPD for the onboard RAM> Mate Kukri reverse engineered the scheme by which the SPDs are chosen at boot, based on the wiring of the board. This should just about match the way Lenovo did it in their firmware. Signed-off-by: Leah Rowe <leah@libreboot.org>
11 daysDisable m2 caddy hotplug on T480SLeah Rowe
This fixes an error where nvme disappears and gets renamed on s3 resume. Mate Kukri told me to test that and it worked. Signed-off-by: Leah Rowe <leah@libreboot.org>
11 daysvendor.sh: Remove T480 VGA ROM download handlingLeah Rowe
Libreboot's binary blob reduction policy is crystal clear: If a blob can be avoided, it must be avoided. The ThinkPad T480 was using Intel's VGA ROM for graphics initialisation very briefly, before Mate fixed libgfxinit. Since libgfxinit is fixed, the Intel VGA ROM is obsolete, so we should not be handling this at all. Similarly, the Nvidia ROM handling has been removed, because Mate is hard-disabling that in the coreboot code anyway, since the Nvidia dGPU didn't work when tested anyway. Even if it did, Libreboot's blob policy makes it clear that Intel graphics with native init from coreboot is to be the preferred option. Signed-off-by: Leah Rowe <leah@libreboot.org>
11 daysEnable legacy 8254 timer on ThinkPad T480Leah Rowe
I also enabled this on T480S, because otherwise SeaBIOS hung. Enabling it shouldn't cause any harm on the T480, though Mate did say that his machine seemed to work with my setup. However, I believe that was when I gave him the ones that lbmk built with the VGA ROM. Now it builds with libgfxinit, because Mate was able to fix libgfxinit on this machine. Signed-off-by: Leah Rowe <leah@libreboot.org>
11 dayslibgfxinit on Thinkpad T480Leah Rowe
was previously using the VGA ROM. Signed-off-by: Leah Rowe <leah@libreboot.org>
11 daysNEW MAINBOARD: ThinkPad T480SLeah Rowe
Added t480s delta to deguard, for MFS config. Updated coreboot/next to latest t480 patch set, which includes t480s. This porting was done by Mate Kukri. also includes experimental t480s support Also added a data.vbt file (not in the gerrit patch) for the T480s. I had to turn on 8254 legacy timer on t480s, otherwise SeaBIOS would hang. Same issue I saw on OptiPlex 3050 Micro. Minor issue: On S3 resume, nvme0n1 for example got renamed to nvme0n2. This caused a crash if running Linux from the nvme. I confirmed this via live USB distro. So this port will need some tweaking before it can be considered stable. Also uses libgfxinit, which Mate recently fixed. I'm going to enable libgfxinit on regular T480 next. Signed-off-by: Leah Rowe <leah@libreboot.org>
12 daysNEW MAINBOARD: ThinkPad T480Leah Rowe
This uses the excellent deguard utility, written by the excellent Mate Kukri. A few bugs but it mostly works. Documentation to come shortly, in lbwww.git. Signed-off-by: Leah Rowe <leah@libreboot.org>
12 daysMerge pull request 'Update U-Boot to v2024.10' (#253) from ↵Leah Rowe
alpernebbi/lbmk:uboot-v2024.10 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/253
13 daysvendor.sh: Use the new deguard for 3050microLeah Rowe
I'm adding ThinkPad T480 support next, which requires the new revision of deguard. Mate Kukri changed the way deguard is used, in a rewrite of the project, so lbmk has to change too. Signed-off-by: Leah Rowe <leah@libreboot.org>
13 daysu-boot: Enable USB with a preboot commandAlper Nebi Yasak
We need to initialize the USB subsystem before we can use USB devices like keyboards and external disks, by running `usb start`. Use the PREBOOT config option to run the necessary command before U-Boot tries to automatically boot anything. It's already enabled for boards other than gru_kevin and gru_bob, so just update those two configs. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
13 daysu-boot: Update ARM64 boards to v2024.10Alper Nebi Yasak
Set default U-Boot revision to v2024.10 and rebase patches on top of that. The video subsystem now has switched to using the 'cyclic' mechanism, so the code around one of the video patches changed a bit. x86 boards were already switched to v2024.10. Update U-Boot for the remaining ARM64 boards as usual: - Turn old configs into defconfigs (./update trees -s u-boot) - Save the diff from old upstream defconfig (diffconfig $theirs $ours) - Update U-Boot revision, rebase patches, and clean old trees - Prepare new U-Boot tree (./update trees -f u-boot) - Review the diffconfigs to see if any options were renamed upstream - Copy over the new upstream defconfigs and apply earlier diff - Turn new defconfigs into configs (./update trees -l u-boot) Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2024-11-24config/deps/fedora41: Add openssl-devel-engine to dependency listMate Kukri
openssl-devel was split up in Fedora 41, and this package is required to build libreboot on Fedora 41. This was reported by "tweezers" on #libreboot. Signed-off-by: Mate Kukri <km@mkukri.xyz>
2024-11-21e6400nvidia: Disable U-BootLeah Rowe
This uses the "normal" config. Previous changes prevent U-Boot images being built for this anyway, but it does yield a warning message. Remove the warning at the source. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-21rom.sh: Support SeaUBoot for 64-bit x86 U-BootLeah Rowe
Same concept as SeaGRUB, but for U-Boot. SeaBIOS starts, but has a bootorder file loading U-Boot first, from flash. You can interrupt it with the ESC menu, to boot something else in SeaBIOS, including GRUB. With this, we can effectively provide extremely user-friendly UEFI-first setups in Libreboot. Take that, edk2! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-20U-Boot x86: Avoid clearing the VESA displayLeah Rowe
This is a patch from Simon Glass. U-Boot clears the display when it starts up, but was asking the VESA driver to do the same, needlessly; this patch avoids the latter. A further patch is also included, which provides a better message when jumping into long mode on the SPL (64-bit) target, dumping it on the serial console instead of using printf. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-20disable U-Boot for now on HP EliteBook 8560wLeah Rowe
dGPU only, and starts in text mode. will have to test with vesa framebuffer later on. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-20enable serial debug on HP EliteBook 8460pLeah Rowe
there's a uart on the docking station Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-20enable serial debug on hp elite 8200 sffLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-20enable the serial console on thinkpad x60Leah Rowe
it has one on the docking station Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-20enable the serial console on thinkpad t60Leah Rowe
it has one on the docking station Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-20Only boot 32-bit u-boot from grub, 64 from seabiosLeah Rowe
For some reason, 32-bit U-Boot only works when executed from GRUB, but not SeaBIOS; 64-bit U-Boot only works from SeaBIOS! This will have to be investigated. Standalone U-Boot, where U-Boot is the primary payload, has not yet been tested in Libreboot, and will not be provided for some time due to stability concerns. More testing is needed! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19make the u-boot grub menuentry more usefulLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19Re-enable U-Boot x86 on real mainboardsLeah Rowe
The previous stability issues were resolved, thanks to the previous revision which added a fix courtesy Simon Glass. This reverts commit eba73c778a85d1c6ad2f0de57c82a8775cdd1c17.
2024-11-19u-boot x86 serial/ns16550: disable UART as neededLeah Rowe
U-Boot was hanging on hardware, but not Qemu. This is because on the machines tested, namely the X200 and E6230 laptops supported in Libreboot, the UART was disabled from coreboot. This U-Boot patch from Simon Glass works around the issue by silently disabling the UART when it isn't there. Instead, output is sent to the display and U-Boot no longer hangs. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19Disable U-Boot x86 except on QemuLeah Rowe
It's really buggy on hardware. Disable for now. I've contacted Simon Glass on IRC, asking about hardware. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19fix U-Boot hotkey mention in grub.cfgLeah Rowe
it's u, not b, for the U-Boot hotkey Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19Update x86 U-Boot to v2024.10 (was v2024.07)Leah Rowe
It's a new experimental payload in Libreboot, so we may aswell start with the very latest release of U-Boot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19grub.cfg: mark U-Boot as experimental in the menuLeah Rowe
it's important that we maintain realistic expectations. x86 u-boot is not yet fully stable, so mark it as such. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19Enable x86 U-Boot payload on every x86 boardLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-19Add U-Boot x86_64 payloadLeah Rowe
Currently seems to stall when booted from the GRUB payload, but works when booted from the SeaBIOS menu. I also tested it as a standalone payload and it seems to boot. Will test on hardware next, and start adding it to more mainboards. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-09add arm-none-eabi-gcc-cs-c++ to fedora dependencyLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-07clean up the coreboot submodulesLeah Rowe
also bring the coreboot/next modules in line with the recent merge that did away with coreboot/dell7 the submodules for coreboot/haswell were still there, and have now been deleted; the haswell tree was used for the NRI patches, which were moved to /default some time ago Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-06Bump coreboot/next and merge coreboot/dell7Leah Rowe
coreboot/dell7 is now part of coreboot/next, which in turn has been updated, to accomodate 3050 micro patchset 18: https://review.coreboot.org/c/coreboot/+/82053/18 It incorporates my Verb/VBT patches, which are therefore no longer included separately. Mate has fixed the USB config; see diff for details. The configuration of USB ports was wrong, before. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-05data/coreboot: add missing variableLeah Rowe
payload_uboot_i386 must be defined here, or the build will fail for coreboot targets Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-04coreboot/default: remove unnecessary moduleLeah Rowe
The fsp module is unnecessary on coreboot/default, and therefore constitutes a waste of disk space. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-03Experimental U-Boot payload (32-bit dtb, U-Boot)Leah Rowe
NOTE: Support added for xarch target x86_64-elf, but U-Boot failed to build with this error: OBJCOPY lib/efi_loader/helloworld.efi x86_64-elf-objcopy: lib/efi_loader/helloworld_efi.so: invalid bfd target make[2]: *** [scripts/Makefile.lib:476: lib/efi_loader/helloworld.efi] Error 1 Since I'm building U-Boot for x86_64 *on* an x86-64 host, and since that is currently the recommended type of machine to use for lbmk development, and since the other x86 payloads currently don't cross compile anyway, this is an acceptable compromise for now. This is because at present, I'm not making U-Boot the primary payload on x86, instead preferring to chain it from GRUB and SeaBIOS. The target.cfg file for x86 u-boot shows xarch/xtree commented. Uncomment these to compile on crossgcc instead of hostcc. I mention 64-bit because I initially did this first, but decided to do 32-bit first. I'll work on the 64-bit one next (SPL). It's only enabled in QEMU for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-11-01coreboot/default: Re-base all patchesLeah Rowe
There were a lot of unnecessary patches, such as the VRAM patches; as Nicholas Chin has explained to me, the drivers for these machines will just allocate what RAM they want anyway, so in a lot of cases the extra allocated Video RAM simply reduces the total amount of memory for other uses. In general, we have a lot of patches that have existed for years. A much more aggressive sweep will be done in the next major audit, especially when the revisions are updated again. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-31NEW MAINBOARD: Dell OptiPlex 780 USFFLeah Rowe
Thanks go to Nicholas Chin and Lorenzo Aloe for working on and testing this code. Based on the 780 MT port. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-31coreboot/dell3050micro: enable coffeelake CPUsLeah Rowe
pin mod needed (soldering) but according to mate, you can use some coffeelake CPUs on these machines, despite them being intel 7th gen. this includes 8-core chips. this patch enables the software configuration in coreboot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-28NEW MAINBOARD: Dell OptiPlex 780 MTLeah Rowe
Thanks go to Lorenzo Aloe and Nicholas Chin for working on and testing this code. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-28coreboot/dell7: add missing ifdtool nuke patchLeah Rowe
This is for blanking the ME region on release builds. This is required for lbmk when doing Libreboot releases, on images that use an Intel ME region. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-27re-update seabios to latest revisionLeah Rowe
I reset it temporarily back to 1.16.3 when testing the SeaBIOS hanging bug on 3050 micro, but the revision had no effect; the bug was caused by a bad coreboot config Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-273050micro: Re-enable SeaGRUBLeah Rowe
Remove what is now unnecessary bloat, for ensuring that GRUB is the primary payload; SeaGRUB is the only preference, as per lbmk design. The SeaBIOS hanging issue was fixed, so SeaGRUB is OK now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-27Merge pull request 'config/coreboot/default: Update MEC5035 patches' (#244) ↵Leah Rowe
from nic3-14159/lbmk:mec5035-updates into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/244
2024-10-273050micro: don't set static option tableLeah Rowe
Again, I'm adapting the config to be as close to the coreboot one as possible. I compiled directly from coreboot earlier, and got SeaBIOS to work on my 3050. I'm matching the setup as closely as possible. Once it works, I can use that in a Libreboot release but then debug why the old config wasn't working. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-273050micro: Use alt century byte +legacy 8254 timerLeah Rowe
I'm eliminating as many differences as possible between lbmk's setup, and the setup that is default when simply building from the gerrit patch, directly in coreboot, by just picking the mainboard; in this way, coreboot picks SeaBIOS as payload. I already changed the SeaBIOS configs, in the previous patch. Upon testing, this seems to have fixed the SeaBIOS hanging. I need to have both of these options selected, or SeaBIOS hangs just after it says "Press ESC" for the boot menu. With this config change, SeaBIOS does not hang; instead, it shows the list of devices as normal, and boots your machine. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-27Use SeaBIOS 1.16.3 and enable debuggingLeah Rowe
This diff matches the setup currently used in coreboot. I'm eliminating as many differences as possible, while I test the SeaBIOS hanging issue on Dell Optiplex 3050 Micro. The actual SeaBIOS configs have also been modified, to match the coreboot config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-26config/coreboot/default: Update MEC5035 patchesNicholas Chin
- Update the MEC5035 S3 patches to the versions that were sent upstream to prevent conflicts with subsequent patches for that EC. - Update the patch that enables the S3 SMI handler in mainboard code so that all Latitudes use the handler. - Add a new patch that tells the EC to route power button events to the host so that the OS can decide what to do. Without it, the EC powers off the system without letting the OS cleanly shut down. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-10-27Switch Dell 3050 Micro to newer coreboot revisionLeah Rowe
Specifically, use the same revision that Mate used in patchset 15. This will ensure that any issues are *not* caused by the coreboot revision; this is being done, because the old coreboot revision was from July, but patchset 15 from Mate is based on a September revision of coreboot. I've been eliminating as many variables as possible, trying to fix SeaBIOS payload on this machine, because it hangs in Libreboot, but not when building from gerrit directly, which means the coreboot revision may be a factor (since I'm using his patches on an older revision so upstream might have made some changes since then that the port relies on). For this, a new coreboot tree is used, called "dell7", referring to the fact that Kabylake is Intel's 7th generation. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-10-26Update dell 3050 patch to patch 15 (pwm fix)Leah Rowe
Use patchset 15 instead of 14: config/coreboot/default/patches/0061-WIP-OptiPlex-3050-Micro-port.patch Rebase the verb patch; patchset 15 modified the Makefile: config/coreboot/default/patches/0064-dell-optiplex_3050-add-hda_verb.c.patch We were using patchset 14 for the 3050 micro: https://review.coreboot.org/c/coreboot/+/82053/14 Now we use patchset 15: https://review.coreboot.org/c/coreboot/+/82053/15 Without this patch, the fans are always on a low setting, on the Dell OptiPlex 3050 Micro, even under stress conditions. With this patch, the fans change speed according to CPU temperature. I had to rebase my verb patch, because Mate modified the Makefile to add his sch5555 handler, on the same line where I add hda_verb. Mate tells me he will merge my verb and vbt patches into a further patchset later on. For now, I've simply rebased these patches on top of Mate's newer work; I've told him he can use them in his port. I'm probably going to now issue a new revision ROM image for Libreboot 20241008, so that users can get this fix sooner. Signed-off-by: Leah Rowe <leah@libreboot.org>