Added missing txtmode config for T420

Rolled back the recent SeaBIOS revision update, which
therefore removes these SeaBIOS patches:

* 9029a010 kconfig: fix the check-lxdialog.sh to work with gcc 14+
* 8863cbbd ahci: add controller reset
* df9dd418 update pci_pad_mem64 handling
* a4fc1845 add romfile_loadbool()
* a2725e28 drop acpi tables and hex includes
* 35aa9a72 drop obsolete acpi table code
* 1b598a1d usb-hid: Support multiple USB HID devices by storing them in a linked list

Technically, I need only revert instead to revision df9dd418, but
that and the other revisions above contain changes that may possibly
cause other breakage.

We know the old revision worked, so roll back these 7 SeaBIOS commits.

Now I will re-compile the 25.04 release and re-upload it as rev1.

Signed-off-by: Leah Rowe <leah@libreboot.org>

Signed-off-by: Leah Rowe <leah@libreboot.org>

Recently, gru boards were migrated to use common stack addresses with
U-Boot commit 5e7cd8a11995 ("rockchip: Use common bss and stack
addresses on RK3399") and commit 49f8131e5594 ("rockchip: rk3399-gru:
Use TPL with common bss and stack addresses"). This is done with the
ROCKCHIP_COMMON_STACK_ADDR config.

With POSITION_INDEPENDENT, INIT_SP_RELATIVE defaults to enabled as well.
However, ROCKCHIP_COMMON_STACK_ADDR selects HAS_CUSTOM_SYS_INIT_SP_ADDR,
which depends on INIT_SP_RELATIVE being disabled. So this results in a
configuration warning:

  WARNING: unmet direct dependencies detected for HAS_CUSTOM_SYS_INIT_SP_ADDR
    Depends on [n]: ARM [=y] && ARCH_KIRKWOOD [=n] || ARC [=n] || ARM [=y] && !INIT_SP_RELATIVE [=y] || MIPS [=n] || PPC [=n] || RISCV [=n]
    Selected by [y]:
    - ROCKCHIP_COMMON_STACK_ADDR [=y] && ARM [=y] && ARCH_ROCKCHIP [=y] && SPL_SHARES_INIT_SP_ADDR [=y]

I'm not sure if adhering to the Rockchip values means we can't be
position-independent. Disabling INIT_SP_RELATIVE still appears to keep
my kevin board working, so let's do that for now.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Run `./mk -l u-boot` to regenerate full configs from our new defconfigs.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Apply our preserved changes to the new U-Boot defconfigs. Upstream
rearranged memory layouts for Rockchip boards to a unified layout, which
got rid of CUSTOM_SYS_INIT_SP_ADDR and HAS_CUSTOM_SYS_INIT_SP_ADDR, and
will need a change to a related INIT_SP_RELATIVE later.

Normalize the positions of each line in the config by regenerating the
defconfig by `./mk -l u-boot` and then `./mk -s u-boot`, so that the
diff looks all green when we actually expand it to the full config.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Copy over the new upstream defconfigs from the refreshed U-Boot trees,
so we can fold our modifications into them. Manually done, but like:

    do_defconfig() {
        ours="$1"
        theirs="$2"
        tree="$3"

        cp src/u-boot/${tree}/configs/${theirs}_defconfig \
           config/u-boot/${ours}/config/default
    }

    do_defconfig  amd64coreboot   coreboot64        x86_64
    do_defconfig  i386coreboot    coreboot          x86
    do_defconfig  gru_bob         chromebook_bob    default
    do_defconfig  gru_kevin       chromebook_kevin  default
    do_defconfig  qemu_arm_12mb   qemu_arm64        default

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Set the U-Boot revision to the commit hash for v2025.04, and rebase the
patches for the default U-Boot tree to accommodate for upstream changes:

 - The SPL/TPL/VPL phases are being unified under the xPL name, so
   there's a config rename.
 - Some test macros were renamed, for the video-related patches.
 - Add some missing hunks for video damage series.
 - Upstream Makefile adds another argument to the binman call.
 - The SWIG related patch is merged upstream, drop it.

I'm not sure if src/u-boot/* directories are regenerated on new builds,
so it may be necessary to remove them manually after applying this.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Run diffconfig from Linux to track our modifications to the old upstream
defconfigs, so we can apply them to the new ones. Restore the original
defconfigs to highlight our changes here, and upstream changes in the
next commit. Done manually, but something like:

  do_diff() {
      ours="$1"
      theirs="$2"
      tree="$3"

      diffconfig \
          src/u-boot/${tree}/configs/${theirs}_defconfig \
          config/u-boot/${ours}/config/default \
          >config/u-boot/${ours}/config/diffconfig

      cp src/u-boot/${tree}/configs/${theirs}_defconfig \
          config/u-boot/${ours}/config/default
  }

  do_diff amd64coreboot    coreboot64        x86_64
  do_diff i386coreboot     coreboot          x86
  do_diff gru_bob          chromebook_bob    default
  do_diff gru_kevin        chromebook_kevin  default
  do_diff qemu_arm64_12mb  qemu_arm64        default

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Run `./mk -s u-boot` to convert our configs into defconfigs, so we can
keep our changes to the old upstream defconfigs and re-apply them to the
new upstream defconfigs.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Signed-off-by: Leah Rowe <leah@libreboot.org>