this is based directly on the audit6 final revision.

same idea as klompboot. remove u-boot and arm support,
remove pico-serprog, remove support for making release
archives, and basically see how small the build
system can possible get.

quackboot *beats* the very first klompboot, at 790 lines,
because klompboot 1 was just over 800 lines. klompboot 2
was 701 lines. vendor file logic is about 200 sloc so
the next klompboot will be about 600 lines.

this is the very first quackboot.

Signed-off-by: Leah Rowe <leah@libreboot.org>

Set default U-Boot revision to v2024.07 and rebase patches on top of
that. One patch that fixes drawing box characters (UTF-8 to CP437) had
an alternative merged, another hack we have to fix regulator issues is
no longer neccessary as the issue is fixed, and my QEMU patches were
merged upstream, so drop these patches. One patch we have to disable
binman images can be replaced by a simpler alternative so drop it too.

Upstream kconfig status is still unstable, so updating configs with
`make oldconfig` would miss important upstream changes, since they rely
on carrying defaults via upstream defconfigs. Update the configs as
such, like before:

- Turn old configs into defconfigs (./update trees -s u-boot)
- Save the diff from old upstream defconfig (diffconfig $theirs $ours)
- Update U-Boot revision, rebase patches, and clean old trees
- Prepare new U-Boot tree (./update trees -f u-boot)
- Review the diffconfigs to see if any options were renamed upstream
- Copy over the new upstream defconfigs and apply earlier diff
- Turn new defconfigs into configs (./update trees -l u-boot)

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

let them specific it, rather than falling back
to coreboot/default (can also be used for coreboot boards)

Signed-off-by: Leah Rowe <leah@libreboot.org>

arch no longer needs to be set, on multi-tree projects,
and it has been renamed to xarch

the new behaviour is: if xarch is set, treat it as a
list of crossgcc targets and go through the list. set
the first one as the target, for what lbmk builds, but
build all of the defined crossgccc targets

crossgcc_ada is now xlang, and defines which languages
to build, rather than whether to build gcc-gnat

Signed-off-by: Leah Rowe <leah@libreboot.org>

only call crossgcc for coreboot and u-boot, but use
hostcc for everything else. simplify the checking of
which architecture to compile for. "arch" in target.cfg
files has been modified, to allow further simplification.

without this patch, the logic currently only *barely* avoids
using crossgcc on things like utils, and only works in practise
because, in practise, lbmk only works on x86_64 anyway.

the new logic, as per this patch, is simpler and more robust.

Signed-off-by: Leah Rowe <leah@libreboot.org>

By default U-Boot stores EFI variables in a ubootefi.var file in
whatever EFI System Partition it finds, which would be a FAT filesystem.
I'm occasionally finding out while testing that my ESPs somehow end up
with a corrupted filesystem, and I'm suspecting it's this.

For now, disable storing EFI environment variables on disk so that
U-Boot doesn't try to manipulate the filesystem.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Enable U-Boot commands to manipulate EFI environment storage, to
self-test EFI implementation, and to run a basic EFI test application.
These are so that we can test and debug EFI functionality easier.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

U-Boot upstream is switching to a new code framework for discovering and
booting OSes ("Standard Boot", or "bootstd"). Enable more features for
it, including commands we can use for introspection and debugging.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Normally U-Boot immediately resets the board on a panic. I had run into
"Synchronous Abort"s from shim and rEFInd, and having a traceback in
those cases can be useful. Hang instead of resetting, so the panic
reason stays on the screen.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

We should be able to power the board off from U-Boot command line.
Enable the "poweroff" command for gru boards so we can.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>