Signed-off-by: Leah Rowe <leah@libreboot.org>

it's green there. different colour scheme apparently.

still works on x86. alper said his kevin chromebook was green!

Signed-off-by: Leah Rowe <leah@libreboot.org>

Signed-off-by: Leah Rowe <leah@libreboot.org>

U-Boot on ARM64 also enables the bootflow menu.

Signed-off-by: Leah Rowe <leah@libreboot.org>

Set default U-Boot revision to v2024.10 and rebase patches on top of
that. The video subsystem now has switched to using the 'cyclic'
mechanism, so the code around one of the video patches changed a bit.

x86 boards were already switched to v2024.10. Update U-Boot for the
remaining ARM64 boards as usual:

- Turn old configs into defconfigs (./update trees -s u-boot)
- Save the diff from old upstream defconfig (diffconfig $theirs $ours)
- Update U-Boot revision, rebase patches, and clean old trees
- Prepare new U-Boot tree (./update trees -f u-boot)
- Review the diffconfigs to see if any options were renamed upstream
- Copy over the new upstream defconfigs and apply earlier diff
- Turn new defconfigs into configs (./update trees -l u-boot)

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

U-Boot has migrated to using upstream device-tree files for gru boards,
but the clock driver doesn't yet support setting rates for a certain
clock that upstream uses for the eDP display. It happens to work without
it, so for now remove the clock setting until the driver is fixed.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Commit 46e01c0e1dad ("u-boot: Avoid building U-Boot-only binman images")
added a patch that prevents an error while building U-Boot, due to some
U-Boot images needing a copy of BL31 that we are not passing in.

Removing build instructions for these images isn't really necessary,
when we can instead tell the build tool that it shouldn't exit with an
error. It checks a BINMAN_ALLOW_MISSING environment variable for this,
but just unconditionally replace the check with the argument.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

Set default U-Boot revision to v2024.07 and rebase patches on top of
that. One patch that fixes drawing box characters (UTF-8 to CP437) had
an alternative merged, another hack we have to fix regulator issues is
no longer neccessary as the issue is fixed, and my QEMU patches were
merged upstream, so drop these patches. One patch we have to disable
binman images can be replaced by a simpler alternative so drop it too.

Upstream kconfig status is still unstable, so updating configs with
`make oldconfig` would miss important upstream changes, since they rely
on carrying defaults via upstream defconfigs. Update the configs as
such, like before:

- Turn old configs into defconfigs (./update trees -s u-boot)
- Save the diff from old upstream defconfig (diffconfig $theirs $ours)
- Update U-Boot revision, rebase patches, and clean old trees
- Prepare new U-Boot tree (./update trees -f u-boot)
- Review the diffconfigs to see if any options were renamed upstream
- Copy over the new upstream defconfigs and apply earlier diff
- Turn new defconfigs into configs (./update trees -l u-boot)

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

we don't need to do it in the release function

Signed-off-by: Leah Rowe <leah@libreboot.org>

it's only needed for each board

Signed-off-by: Leah Rowe <leah@libreboot.org>