lbmk.git/config/seabios/default, branch 26.01_branch

Libreboot 26.01rev1 Magnanimous Max

2026-02-26T01:39:20+00:00

This is a hotfix release for Libreboot 26.01, which
contains the following patches:

* 379ccc2177 Re-add x230_12mb corebootfb config
* a9428b65c8 get.sh: properly initialise _ua
* 7aadc1dda3 g43t_am3: make it 2mb, not 4mb
* 8c8c3d7cb1 supermicro x11ssh_f: Remove release="n"
* 7e3c01d8d7 supermicro x11ssh_f: Disable ME HECI in devicetree
* 4f287c85c0 supermicro x11ssh_f: Use deguard-configured ME image instead of SPS
* 47401fc170 Delete unused config/ifd/supermicro-x11-lga1151-series directory
* 0415148e92 supermicro x11ssh_f: set release="n"
* ce5eb284a3 supermicro x11ssh_f: use underscores in dir names
* 1426c9cbd0 Added Danish Keymap dkqwerty.gkb
* 62859905ef Add Supermicro X11SSH-F/LN4F port
* 8d8a1f36a9 GRUB: don't download po files in bootstrap

These fixes are backports from the master branch.

Signed-off-by: Leah Rowe

Libreboot 26.01 release

2026-01-30T07:14:30+00:00

Signed-off-by: Leah Rowe

Libreboot 26.01 RC4 Magnanimous Max

2026-01-21T01:20:43+00:00

Signed-off-by: Leah Rowe

Libreboot 26.01 RC3 Magnanimous Max

2026-01-21T00:01:38+00:00

Signed-off-by: Leah Rowe

Libreboot 26.01 RC2, or: Magnanimous Max

2026-01-20T04:32:50+00:00

Signed-off-by: Leah Rowe

Libreboot 26.01 RC1 Tenacious Tomato

2025-12-25T00:11:59+00:00

Signed-off-by: Leah Rowe

bump seabios revision

2025-12-24T00:58:24+00:00

by the time i'd done this, i'd realised that seabios only
modified some documentation upstream. the code has not
changed since last update, upstream.

no point scrapping the update now. now we have slightly
better documentation for seabios!

Signed-off-by: Leah Rowe

SeaBIOS/default: Bump to rev b686f460, 28 Jun 2025

2025-07-06T14:31:48+00:00

This brings in the following changes:

* b686f460 sercon: Fix keycodes for F11 and F12
* b52ca86e docs: Note v1.17.0 release
* a6c8e8bb ahci: Fix hangs due to controller reset

The serial console fix is useful to us, as is the AHCI
fix; the latter was previously mitigated by removing
SeaBIOS's AHCI reset patch.

Upstream realised that the AHCI controllers need to have
a timeout on them when resetting them, because they don't
always react immediately to commands.

This makes the AHCI behaviour more correct, in SeaBIOS.

Signed-off-by: Leah Rowe

Libreboot 25.06 release

2025-06-30T13:08:48+00:00

Signed-off-by: Leah Rowe

Restore SeaBIOS 9029a010 update, but with AHCI fix

2025-05-02T01:24:07+00:00

I fixed the AHCI bug, with a patch that I wrote. It works by
restoring the old SeaBIOS AHCI initialisation behaviour, whereby
the AHCI controller is enabled from its current state; the patch
that broke AHCI in coreboot (tested on ThinkPad T420), changed
AHCI initialisation behaviour so that the controller's state is
first reset, prior to enablement.

However, my patch also retains the new AHCI initialisation
behaviour, when a CSM is in use. The AHCI reset patch was done,
by the author, specifically for SeaBIOS in CSM mode, so it makes
sense to only change the behaviour conditionally according to that.

This reverts commit 8245f0b3211812ac818adadd6526b0b39c63f3f0.

Signed-off-by: Leah Rowe