nitrocaster boards are hard to find nowadays and i'm not
comfortable supporting the knockoff chinese gear; quality
varies greatly, and i can't know how reliable they are.

nitrocaster has been out of business so it's just not
viable to support this mod anymore. in fact, keeping the
eDP-based targets is a liability to libreboot.

regular x220/x230 (non-eDP-modded) are retained. the eDP
modkit from nitrocaster let you use eDP screens instead
of lvds, on thinkpad x220 and x230, letting you use
higher resolution screens.

older lbmk revs can still be used, if you happen to come
across one of these boards. i only recommend using the
official nitrocaster board, if youcan find one unused.

ymmv with the chinese gear. better just use an unmodded
x230 or get a different machine.

Signed-off-by: Leah Rowe <leah@libreboot.org>

Signed-off-by: Leah Rowe <leah@libreboot.org>

export LBMK_VERSION_TYPE=x
x can be: stable, unstable

in target.cfg files, specify:
status=x
x can be: stable, unstable, broken, untested
if unset, lbmk defaults to "unknown"

if LBMK_VERSION_TYPE is set, no confirmation is asked
if the given target matches what's set (but what's set
in that environmental variable can only be stable or
unstable)

if LBMK_RELEASE="y", no confirmation is asked, unless
the target is something other than stable/unstable

"unstable" means it works, but has a few non-breaking
bugs, e.g. broken s3 on dell e6400

whereas, if raminit regularly fails or it is so absolutely
unreliable as to be unusable, then the board should be
declared "broken"

untested means: it has not been tested

With this change, it should now be easier to track whether
a given board is tested, in preparation for releases. When
working on trees/boards, status can be set for targets.

Also: in the board directory, you can add a "warn.txt" file
which will display a message. For example, if a board has a
particular quirk to watch out for, write that there. The message
will be printed during the build process, to stdout.

If status is anything *other* than stable, or it is unstable
but LBMK_VERSION_TYPE is not set to "unstable", and not building
a release, a confirmation is passed.

If the board is not specified as stable or unstable, during
a release build, the build is skipped and the ROM is not
provided in that release; this is in *addition* to
release="n" or release="y" that can be set in target.cfg,
which will skip the release build for that target if "n"

Signed-off-by: Leah Rowe <leah@libreboot.org>

Base revision changed to:

commit b6cbfa977f63d57d5d6b9e9f7c1cef30162f575a
Author: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Date:   Fri Jan 5 16:48:17 2024 +0800

    mb/google/dedede/var/metaknight:Add fw_config probe for multi codec
    and amplifier

Of note:

Several out-of-tree ports have been adjusted to use the new SPD config
style, where it is defined in devicetree. I manually updated the E6530
patch myself, based on the update that Nicholas did on E6430 (Nicholas
will later update the E6530 patch himself, and I'll re-merge the patch).

Several upstream patches now exist in this revision, that we were able
to remove from lbmk.

The heap size patch was reverted upstream, as we did, but see:
https://review.coreboot.org/c/coreboot/+/80023
https://review.coreboot.org/c/coreboot/+/79525
Although we still disable the TSEG Stage Cache, ivy/sandy/haswell should
be reliable on S3 now (leaving TSEG Stage Cache disabled, for now, anyway).

Also included in upstream now:

commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94
Author: Bill Xie <persmule@hardenedlinux.org>
Date:   Sat Oct 7 01:32:51 2023 +0800

    drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume

Further patches from upstream:

commit 432e92688eca0e85cbaebca3232f65936b305a98
Author: Bill Xie <persmule@hardenedlinux.org>
Date:   Fri Nov 3 12:34:01 2023 +0800

    drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum

This should fix S3 on GM45 thinkpads.

Signed-off-by: Leah Rowe <leah@libreboot.org>

arch no longer needs to be set, on multi-tree projects,
and it has been renamed to xarch

the new behaviour is: if xarch is set, treat it as a
list of crossgcc targets and go through the list. set
the first one as the target, for what lbmk builds, but
build all of the defined crossgccc targets

crossgcc_ada is now xlang, and defines which languages
to build, rather than whether to build gcc-gnat

Signed-off-by: Leah Rowe <leah@libreboot.org>

don't handle "romtype" at all, in board target.cfg files

add /dev/null as pike2008 rom on amd boards. this serves
the same purpose, adding them as empty vga roms, to add
an empty rom in cbfs. pike2008 cards cause seabios to hang,
when their oproms are executed, so we insert a fake rom

on i945 thinkpads, use the coreboot config option:
CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK

when set, this enables the same bootblock copy, for use
with bucts. these two cases, namely pike2008 roms and
i945 bootblock copies, no longer need to be handled in code

Signed-off-by: Leah Rowe <leah@libreboot.org>

the x220 edp patch invalidated lots of configs, so
i did: ./update trees -u coreboot

this is the resulting patch

Signed-off-by: Leah Rowe <leah@libreboot.org>

only call crossgcc for coreboot and u-boot, but use
hostcc for everything else. simplify the checking of
which architecture to compile for. "arch" in target.cfg
files has been modified, to allow further simplification.

without this patch, the logic currently only *barely* avoids
using crossgcc on things like utils, and only works in practise
because, in practise, lbmk only works on x86_64 anyway.

the new logic, as per this patch, is simpler and more robust.

Signed-off-by: Leah Rowe <leah@libreboot.org>

This reverts commit 29e9c32e32f8e947f51a3efe375dab3ef8e1987e.

this is to work around recent s3 suspend/resume issues

Signed-off-by: Leah Rowe <leah@libreboot.org>