Signed-off-by: Leah Rowe <leah@libreboot.org>

Several patches are now merged upstream and no longer needed
in lbmk, such as the HP EliteBook 8560w patch, and related
patches. Some patches were changed, for example the Dell Latitude
ivb/snb laptops are now variants in coreboot, instead of being
individual ports; now they re-use the same base code.

This this, the corresponding files under config/submodules
have changed, for things like 3rdparty submodules e.g. libgfxinit,
and tarballs e.g. crossgcc.

This is long overdue, and will enable more boards to be added.
This newer revision will be used in the next release, and some
follow-up patches will merge these trees into default:

* coreboot/haswell
* coreboot/dell

Signed-off-by: Leah Rowe <leah@libreboot.org>

set a default one in mkhelper.cfg

Signed-off-by: Leah Rowe <leah@libreboot.org>

See:
https://codeberg.org/libreboot/lbmk/issues/216

Almost all users will be OK running GRUB, but a
minority of users have experienced a fatal error
pertaining to grub_free() or grub_realloc() (as
my investigation of GRUB sources reveal when grepping
the error reported in the link above).

We don't yet know what the bug is, only that the
error occurs, leading to an effective brick if the
user has GRUB as their primary payload.

So far, it has only been reported on some Intel
SandyBridge-based Dell Latitudes in Libreboot, but
we can't be too sure.

The user reported that memtest86+ passes just fine,
and SeaBIOS works; BIOS GRUB also works, which means
that the bug is likely only in an area of GRUB that
runs specifically on the coreboot payload, so it's
probably a driver in GRUB when running on the metal
rather than BIOS/UEFI.

The build system supports a configuration whereby
SeaBIOS is the primary payload, but GRUB is available
in the SeaBIOS boot select menu, and an additional
configuration is available where GRUB is what SeaBIOS
executes first (while still providing boot select);
both of these are now the *only* configurations
available, on all x86 targets except QEMU.

The QEMU target is fine because if the bug occurs there,
you can just close QEMU and try a different image.

Even after this bug is later identified and fixed,
the GRUB source code is vastly over-engineered and there
are likely many more such bugs. SeaBIOS is a reliable
payload; the code is small and robust. Remember always:

Code

equals

bugs

Therefore, this configuration change is likely going
to be permanent. This will apply in the next release.

Signed-off-by: Leah Rowe <leah@libreboot.org>

the release variable is all we need, turning a target on
or off for a given release.

the status checks were prone to bugs, and unnecessary; it
also broke certain benchmark scripts.

it's better to keep the lbmk logic simpler. board status
will be moved to the documentation instead.

Signed-off-by: Leah Rowe <leah@libreboot.org>

Signed-off-by: Leah Rowe <leah@libreboot.org>

export LBMK_VERSION_TYPE=x
x can be: stable, unstable

in target.cfg files, specify:
status=x
x can be: stable, unstable, broken, untested
if unset, lbmk defaults to "unknown"

if LBMK_VERSION_TYPE is set, no confirmation is asked
if the given target matches what's set (but what's set
in that environmental variable can only be stable or
unstable)

if LBMK_RELEASE="y", no confirmation is asked, unless
the target is something other than stable/unstable

"unstable" means it works, but has a few non-breaking
bugs, e.g. broken s3 on dell e6400

whereas, if raminit regularly fails or it is so absolutely
unreliable as to be unusable, then the board should be
declared "broken"

untested means: it has not been tested

With this change, it should now be easier to track whether
a given board is tested, in preparation for releases. When
working on trees/boards, status can be set for targets.

Also: in the board directory, you can add a "warn.txt" file
which will display a message. For example, if a board has a
particular quirk to watch out for, write that there. The message
will be printed during the build process, to stdout.

If status is anything *other* than stable, or it is unstable
but LBMK_VERSION_TYPE is not set to "unstable", and not building
a release, a confirmation is passed.

If the board is not specified as stable or unstable, during
a release build, the build is skipped and the ROM is not
provided in that release; this is in *addition* to
release="n" or release="y" that can be set in target.cfg,
which will skip the release build for that target if "n"

Signed-off-by: Leah Rowe <leah@libreboot.org>

Base revision changed to:

commit b6cbfa977f63d57d5d6b9e9f7c1cef30162f575a
Author: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Date:   Fri Jan 5 16:48:17 2024 +0800

    mb/google/dedede/var/metaknight:Add fw_config probe for multi codec
    and amplifier

Of note:

Several out-of-tree ports have been adjusted to use the new SPD config
style, where it is defined in devicetree. I manually updated the E6530
patch myself, based on the update that Nicholas did on E6430 (Nicholas
will later update the E6530 patch himself, and I'll re-merge the patch).

Several upstream patches now exist in this revision, that we were able
to remove from lbmk.

The heap size patch was reverted upstream, as we did, but see:
https://review.coreboot.org/c/coreboot/+/80023
https://review.coreboot.org/c/coreboot/+/79525
Although we still disable the TSEG Stage Cache, ivy/sandy/haswell should
be reliable on S3 now (leaving TSEG Stage Cache disabled, for now, anyway).

Also included in upstream now:

commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94
Author: Bill Xie <persmule@hardenedlinux.org>
Date:   Sat Oct 7 01:32:51 2023 +0800

    drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume

Further patches from upstream:

commit 432e92688eca0e85cbaebca3232f65936b305a98
Author: Bill Xie <persmule@hardenedlinux.org>
Date:   Fri Nov 3 12:34:01 2023 +0800

    drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum

This should fix S3 on GM45 thinkpads.

Signed-off-by: Leah Rowe <leah@libreboot.org>

arch no longer needs to be set, on multi-tree projects,
and it has been renamed to xarch

the new behaviour is: if xarch is set, treat it as a
list of crossgcc targets and go through the list. set
the first one as the target, for what lbmk builds, but
build all of the defined crossgccc targets

crossgcc_ada is now xlang, and defines which languages
to build, rather than whether to build gcc-gnat

Signed-off-by: Leah Rowe <leah@libreboot.org>

at present, lbmk can remove microcode updates on images for
a given target, if the target specifies
microcode_required="n" in target.cfg

lbmk then provides images with microcode, and images without,
in a given release. although the user can also remove them
manually, this just makes it a bit more convenient, for those
users who do wish to run without the updates. this functionality
is provided only on those platforms where no-microcode is tested.

well, this behaviour implements a compromise on libreboot policy,
which is to always include microcode updates by default. see:
Binary Blob Reduction Policy

the *canoeboot* project now exists, developed in parallel with
libreboot, and it ships without microcode updates, on the same
targets where lbmk also handled this.

running without microcode updates is foolish, and should not
be encouraged. clean up lbmk by not providing this kludge.

the libreboot documentation will be updated, telling such users
to try canoeboot instead, or to remove the update from a given
libreboot rom - this is still possible, and mitigations such as
PECI disablement on GM45 are still in place (and will be kept),
so that this continues to work well.

Signed-off-by: Leah Rowe <leah@libreboot.org>