Added missing txtmode config for T420 Rolled back the recent SeaBIOS revision update, which therefore removes these SeaBIOS patches: * 9029a010 kconfig: fix the check-lxdialog.sh to work with gcc 14+ * 8863cbbd ahci: add controller reset * df9dd418 update pci_pad_mem64 handling * a4fc1845 add romfile_loadbool() * a2725e28 drop acpi tables and hex includes * 35aa9a72 drop obsolete acpi table code * 1b598a1d usb-hid: Support multiple USB HID devices by storing them in a linked list Technically, I need only revert instead to revision df9dd418, but that and the other revisions above contain changes that may possibly cause other breakage. We know the old revision worked, so roll back these 7 SeaBIOS commits. Now I will re-compile the 25.04 release and re-upload it as rev1. Signed-off-by: Leah Rowe <leah@libreboot.org>
This reverts commit a08b8d94fc58fa195adb0261539509d8ddaf4799. From #libreboot IRC today: 07:02 <irys> ooh this is fun. seabios commit 8863cbbd15a73b03153553c562f5b1fb939ad4d7 (ahci: add controller reset) breaks ahci entirely on t420 07:05 <irys> cbmem console on that seabios commit has a timeout then "AHCI/0: device not ready" 07:07 <irys> AHCI works fine if i change config/seabios/default/target.cfg to use the immediate previous seabios commit (df9dd418b3b0e586cb208125094620fc7f90f23d) 07:07 <irys> works in grub payload either way though 07:31 <irys> here, `cbmem -c` after booting the broken rev: https://0x0.st/84oQ.log 07:31 <irys> compared to the working one https://0x0.st/84o1.log 07:33 <irys> i can't report to upstream myself *right now* but i figure you might want to know about this leah I have downloaded those logs locally for reference, so that an upstream report can be made to SeaBIOS. For the purposes of this Libreboot commit, the diff of the logs is as follows (diff -u broken.log working.log): Taking each diff line out of the log, the relevant entries seem to be: Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 +AHCI/0: Set transfer mode to UDMA-6 +Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0 +AHCI/0: registering: "AHCI/0: Netac SSD 128GB ATA-11 Hard-Disk (119 GiBytes)" -WARNING - Timeout at ahci_port_setup:477! -AHCI/0: device not ready (tf 0x80) -All threads complete. -2. Payload [memtest] +2. AHCI/0: Netac SSD 128GB ATA-11 Hard-Disk (119 GiBytes) +3. Payload [memtest] -Space available for UMB: c7000-eb800, f5880-f5ff0 -Returned 16777216 bytes of ZoneHigh +drive 0x000f5fa0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=250069680 +Space available for UMB: c7000-eb800, f5880-f5fa0 +Returned 16773120 bytes of ZoneHigh Therefore, the revision will be reverted back for now. It was only about 8 additional patches imported in the update anyway.
Reported by irys on #libreboot irc Signed-off-by: Leah Rowe <leah@libreboot.org>
Signed-off-by: Leah Rowe <leah@libreboot.org>
src/rp2_common/boot_stage2/boot2_w25x10cl.S:142: Error: junk at end of line, first unrecognized character is `0' src/rp2_common/boot_stage2/boot2_w25x10cl.S:145: Error: garbage following instruction -- `beq 00b' This should also fix it on Debian sid Experimental, where I'm testing with GCC 15 and other bleeding edge dependencies. Signed-off-by: Leah Rowe <leah@libreboot.org>
i forgot to in the last commit, but it didn't matter because it just meant that coreboot.git's own download logic kicked in as a fallback. however, it's better to rely on libreboot's build system for this, since it has redundancy. Signed-off-by: Leah Rowe <leah@libreboot.org>
this fixed kgpe-d16 build errors on gcc 15 when tested on debian sid (with gcc-15 installed from experimental) Signed-off-by: Leah Rowe <leah@libreboot.org>
Many users report bugs, so I'm reverting lbmk back to only supporting the rp2040 dongles for the time being. The documentation will be updated to reflect this. Pico2 support will be re-added at a later date, once more testing has been done, and fixes made if necessary.
This brings in the following improvements from upstream: * 9029a010 kconfig: fix the check-lxdialog.sh to work with gcc 14+ * 8863cbbd ahci: add controller reset * df9dd418 update pci_pad_mem64 handling * a4fc1845 add romfile_loadbool() * a2725e28 drop acpi tables and hex includes * 35aa9a72 drop obsolete acpi table code * 1b598a1d usb-hid: Support multiple USB HID devices by storing them in a linked list Signed-off-by: Leah Rowe <leah@libreboot.org>
Signed-off-by: Leah Rowe <leah@libreboot.org>